def record_task_run(device, serialno):
log("dev_record_start")
AATApp.record_start(device)
time.sleep(2)
th = DetectionStateChangeListenerThread()
th.start()
log("ToneDetector.start_listen(serialno={}, target_freq={})".format(
serialno, OUT_FREQ))
ToneDetector.start_listen(
serialno=serialno,
target_freq=OUT_FREQ,
cb=lambda event: th.tone_detected_event_cb(event))
log("AudioFunction.play_sound(out_freq={})".format(OUT_FREQ))
AudioFunction.play_sound(out_freq=OUT_FREQ)
time.sleep(3)
def stop_then_play():
log("thread stops the playback")
AudioFunction.stop_audio()
time.sleep(4)
log("thread starts the playback")
AudioFunction.play_sound(out_freq=OUT_FREQ)
log("thread returns")
threading.Thread(target=stop_then_play).start()
log("Waiting for {} Hz pure tone detected".format(OUT_FREQ))
elapsed = th.wait_for_event(
DetectionStateChangeListenerThread.Event.RISING_EDGE, timeout=10)
log("elapsed: {} ms".format(elapsed))
time.sleep(1)
log("Trying to wait a timeout event")
elapsed = th.wait_for_event(
DetectionStateChangeListenerThread.Event.FALLING_EDGE, timeout=10)
log("elapsed: {} ms".format(elapsed))
log("dev_record_stop")
AATApp.record_stop(device)
log("ToneDetector.stop_listen()")
ToneDetector.stop_listen()
th.join()
AudioFunction.stop_audio()
def record_task_run(device, serialno, num_iter=1):
log("record_task_run++")
trials = []
log("dev_record_start")
AATApp.record_start(device)
time.sleep(2)
th = DetectionStateChangeListenerThread()
th.start()
log("ToneDetector.start_listen(serialno={}, target_freq={})".format(
serialno, OUT_FREQ))
ToneDetector.start_listen(
serialno=serialno,
target_freq=OUT_FREQ,
cb=lambda event: th.tone_detected_event_cb(event))
log("AudioFunction.play_sound(out_freq={})".format(OUT_FREQ))
AudioFunction.play_sound(out_freq=OUT_FREQ)
time.sleep(3)
for i in range(num_iter):
log("-------- record_task #{} --------".format(i + 1))
trial = Trial(taskname="record")
trial.put_extra(name="iter_id", value=i + 1)
th.reset()
log("trigger_asr() for idle")
trigger_asr(serialno)
#time.sleep(5)
if th.wait_for_event(DetectionStateChangeListenerThread.Event.ACTIVE,
timeout=5) < 0:
log("the tone was not detected, abort the iteration this time...")
trial.invalidate(
errormsg="early return, possible reason: tx no sound")
trials.append(trial)
continue
log("trigger_asr()")
#AATApp.trigger_ssr(device)
trigger_asr(serialno)
if PARTIAL_RAMDUMP_ENABLED:
handle_ssr_ui()
log("Waiting for ASR recovery")
elapsed = th.wait_for_event(
DetectionStateChangeListenerThread.Event.RISING_EDGE, timeout=10)
log("elapsed: {} ms".format(elapsed))
if PARTIAL_RAMDUMP_ENABLED:
log("Waiting for the partial ramdump completed")
handle_ssr_ui()
if elapsed >= 0 and not PARTIAL_RAMDUMP_ENABLED:
time.sleep(10 - elapsed / 1000.0)
trial.put_extra(name="elapsed", value=elapsed)
trials.append(trial)
log("-------- record_task done --------")
log("AudioFunction.stop_audio()")
AudioFunction.stop_audio()
log("dev_record_stop")
AATApp.record_stop(device)
time.sleep(5)
log("ToneDetector.stop_listen()")
ToneDetector.stop_listen()
th.join()
log("record_task_run--")
return trials
def record_task_run(device, serialno, num_iter=1, num_freqs=1):
log("record_task_run++")
log("launch AAT app")
AATApp.launch_app(device)
time.sleep(2)
trials = []
log("dev_record_start")
AATApp.record_start(device)
time.sleep(2)
stm = DetectionStateListener()
def gen_freq():
import random
return 440. * 2**(random.randint(-12, 12) / 12.)
for i in range(num_iter):
log("-------- record_task #{} --------".format(i + 1))
trial = Trial(taskname="record", pass_check= \
lambda t: "result" in t.ds["extra"].keys() and t.ds["extra"]["result"] == "pass")
trial.put_extra(name="iter_id", value=i + 1)
AATApp.print_log(device,
severity="i",
tag=TAG,
log="record_task #{}".format(i + 1))
result = "pass"
freqs = []
for _ in range(num_freqs):
stm.clear()
target_freq = gen_freq()
freqs.append(target_freq)
log("ToneDetector.start_listen(serialno={}, target_freq={})".
format(serialno, target_freq))
ToneDetector.start_listen(
serialno=serialno,
target_freq=target_freq,
cb=lambda event: stm.tone_detected_event_cb(event))
time.sleep(2)
log("AudioFunction.play_sound(out_freq={})".format(target_freq))
AudioFunction.play_sound(out_freq=target_freq)
if stm.wait_for_event(DetectionStateListener.Event.ACTIVE,
timeout=10) < 0:
log("The {}Hz tone is not detected".format(target_freq))
now = "_".join("{}".format(datetime.datetime.now()).split())
log("dump the recorded pcm to \"sdcard/PyAAT/dump_{}\"".format(
now))
AATApp.record_dump(device, "sdcard/PyAAT/dump_{}".format(now))
log("start dumping the process during capturing the frequency..."
)
ToneDetector.WORK_THREAD.dump()
result = "failed"
log("ToneDetectorForDeviceThread.adb-read-prop-max-elapsed: {} ms".format( \
ToneDetector.WORK_THREAD.extra["adb-read-prop-max-elapsed"]))
log("ToneDetectorForDeviceThread.freq-cb-max-elapsed: {} ms".format( \
ToneDetector.WORK_THREAD.extra["freq-cb-max-elapsed"]))
AudioFunction.stop_audio()
ToneDetector.stop_listen()
time.sleep(2)
trial.put_extra(name="result", value=result)
trial.put_extra(name="test_freqs", value=freqs)
trials.append(trial)
log("dev_record_stop")
AATApp.record_stop(device)
time.sleep(2)
log("record_task_run--")
return trials
def record_task_run(device, serialno, num_iter=1):
log("record_task_run++")
trials = []
log("dev_record_start")
AATApp.record_start(device)
time.sleep(2)
stm = DetectionStateListener()
log("ToneDetector.start_listen(serialno={}, target_freq={})".format(
serialno, OUT_FREQ))
ToneDetector.start_listen(
serialno=serialno,
target_freq=OUT_FREQ,
cb=lambda event: stm.tone_detected_event_cb(event))
log("AudioFunction.play_sound(out_freq={})".format(OUT_FREQ))
AudioFunction.play_sound(out_freq=OUT_FREQ)
time.sleep(3)
for i in range(num_iter):
log("-------- record_task #{} --------".format(i + 1))
trial = Trial(taskname="record",
pass_check=lambda t: t.ds["extra"]["elapsed"] > 0)
trial.put_extra(name="iter_id", value=i + 1)
AATApp.print_log(device,
severity="i",
tag=TAG,
log="record_task #{}".format(i + 1))
ToneDetector.WORK_THREAD.clear_dump()
stm.reset()
if stm.wait_for_event(DetectionStateListener.Event.ACTIVE,
timeout=5) < 0:
log("the tone was not detected, abort the iteration this time...")
log("ToneDetectorForDeviceThread.adb-read-prop-max-elapsed: {} ms".format( \
ToneDetector.WORK_THREAD.extra["adb-read-prop-max-elapsed"]))
log("ToneDetectorForDeviceThread.freq-cb-max-elapsed: {} ms".format( \
ToneDetector.WORK_THREAD.extra["freq-cb-max-elapsed"]))
trial.invalidate(
errormsg="early return, possible reason: tx no sound")
trials.append(trial)
now = "_".join("{}".format(datetime.datetime.now()).split())
log("dump the recorded pcm to \"sdcard/PyAAT/dump_{}\"".format(
now))
AATApp.record_dump(device, "sdcard/PyAAT/dump_{}".format(now))
continue
log("trigger_ssr()")
AATApp.trigger_ssr(device)
if PARTIAL_RAMDUMP_ENABLED:
handle_ssr_ui()
log("Waiting for SSR recovery")
elapsed = stm.wait_for_event(DetectionStateListener.Event.RISING_EDGE,
timeout=10)
if elapsed < 0:
log("Timeout in waiting for rising event, possibly caused by missing event not being caught"
)
log("Waiting for the tone being detected")
if stm.wait_for_event(DetectionStateListener.Event.ACTIVE,
timeout=5) < 0:
log("The tone is not detected")
else:
log("The tone is detected, please also check the device log for confirming if it is a false alarm"
)
log("start dumping the process during capturing the frequency...")
ToneDetector.WORK_THREAD.dump()
log("elapsed: {} ms".format(elapsed))
if elapsed < 0:
now = "_".join("{}".format(datetime.datetime.now()).split())
log("dump the recorded pcm to \"sdcard/PyAAT/dump_{}\"".format(
now))
AATApp.record_dump(device, "sdcard/PyAAT/dump_{}".format(now))
log("ToneDetectorForDeviceThread.adb-read-prop-max-elapsed: {} ms".format( \
ToneDetector.WORK_THREAD.extra["adb-read-prop-max-elapsed"]))
log("ToneDetectorForDeviceThread.freq-cb-max-elapsed: {} ms".format( \
ToneDetector.WORK_THREAD.extra["freq-cb-max-elapsed"]))
if PARTIAL_RAMDUMP_ENABLED:
log("Waiting for the partial ramdump completed")
handle_ssr_ui()
if elapsed >= 0 and not PARTIAL_RAMDUMP_ENABLED:
time.sleep(10 - elapsed / 1000.0)
trial.put_extra(name="elapsed", value=elapsed)
trials.append(trial)
log("-------- record_task done --------")
log("AudioFunction.stop_audio()")
AudioFunction.stop_audio()
log("dev_record_stop")
AATApp.record_stop(device)
time.sleep(5)
log("ToneDetector.stop_listen()")
ToneDetector.stop_listen()
log("record_task_run--")
return trials
def record_task_run(device, serialno, num_iter=1):
log("record_task_run++")
package = "com.htc.audiofunctionsdemo"
activity = ".activities.MainActivity"
component = package + "/" + activity
trials = []
cmd = " ".join(["am", "force-stop", package])
device.startActivity(component=component)
time.sleep(1)
log("dev_record_start")
AATApp.record_start(device)
time.sleep(2)
th = DetectionStateChangeListenerThread()
th.start()
log("ToneDetector.start_listen(serialno={}, target_freq={})".format(
serialno, OUT_FREQ))
ToneDetector.start_listen(
serialno=serialno,
target_freq=OUT_FREQ,
cb=lambda event: th.tone_detected_event_cb(event))
log("AudioFunction.play_sound(out_freq={})".format(OUT_FREQ))
AudioFunction.play_sound(out_freq=OUT_FREQ)
time.sleep(3)
for i in range(num_iter):
log("-------- record_task #{} --------".format(i + 1))
trial = Trial(taskname="record")
trial.put_extra(name="iter_id", value=i + 1)
th.reset()
if th.wait_for_event(DetectionStateChangeListenerThread.Event.ACTIVE,
timeout=5) < 0:
log("the tone was not detected, abort the iteration this time...")
trial.invalidate(
errormsg="early return, possible reason: tx no sound")
trials.append(trial)
continue
else:
log("-> record function: pass")
trial.put_extra(name="record", value="pass")
log("AudioFunction.stop_audio()")
AudioFunction.stop_audio()
log("dev_record_stop")
AATApp.record_stop(device)
time.sleep(5)
log("ToneDetector.stop_listen()")
ToneDetector.stop_listen()
th.join()
device.shell(cmd)
log("record_task_run--")
return trials