def main():
logmgr = LogManager("mylog.dat", "w") # , comm=...
# set a run property
logmgr.set_constant("myconst", uniform(0, 1))
add_run_info(logmgr)
add_general_quantities(logmgr)
add_simulation_quantities(logmgr)
vis_timer = IntervalTimer("t_vis", "Time spent visualizing")
logmgr.add_quantity(vis_timer)
logmgr.add_quantity(Fifteen("fifteen"))
logmgr.add_watches(["step.max", "t_sim.max", "t_step.max"])
for istep in range(200):
logmgr.tick_before()
dt = uniform(0.01, 0.1)
set_dt(logmgr, dt)
sleep(dt)
# Illustrate custom timers
if istep % 10 == 0:
with vis_timer.start_sub_timer():
sleep(0.05)
# Illustrate warnings capture
if uniform(0, 1) < 0.05:
warn("Oof. Something went awry.")
logmgr.tick_after()
logmgr.close()
def simple_wave_entrypoint(dim=2, num_elems=256, order=4, num_steps=30,
log_filename="grudge.dat"):
cl_ctx = cl.create_some_context()
queue = cl.CommandQueue(cl_ctx)
from mpi4py import MPI
comm = MPI.COMM_WORLD
num_parts = comm.Get_size()
n = int(num_elems ** (1./dim))
from meshmode.distributed import MPIMeshDistributor
mesh_dist = MPIMeshDistributor(comm)
if mesh_dist.is_mananger_rank():
from meshmode.mesh.generation import generate_regular_rect_mesh
mesh = generate_regular_rect_mesh(a=(-0.5,)*dim,
b=(0.5,)*dim,
n=(n,)*dim)
from pymetis import part_graph
_, p = part_graph(num_parts,
xadj=mesh.nodal_adjacency.neighbors_starts.tolist(),
adjncy=mesh.nodal_adjacency.neighbors.tolist())
part_per_element = np.array(p)
local_mesh = mesh_dist.send_mesh_parts(mesh, part_per_element, num_parts)
else:
local_mesh = mesh_dist.receive_mesh_part()
vol_discr = DGDiscretizationWithBoundaries(cl_ctx, local_mesh, order=order,
mpi_communicator=comm)
source_center = np.array([0.1, 0.22, 0.33])[:local_mesh.dim]
source_width = 0.05
source_omega = 3
sym_x = sym.nodes(local_mesh.dim)
sym_source_center_dist = sym_x - source_center
sym_t = sym.ScalarVariable("t")
from grudge.models.wave import StrongWaveOperator
from meshmode.mesh import BTAG_ALL, BTAG_NONE
op = StrongWaveOperator(-0.1, vol_discr.dim,
source_f=(
sym.sin(source_omega*sym_t)
* sym.exp(
-np.dot(sym_source_center_dist, sym_source_center_dist)
/ source_width**2)),
dirichlet_tag=BTAG_NONE,
neumann_tag=BTAG_NONE,
radiation_tag=BTAG_ALL,
flux_type="upwind")
from pytools.obj_array import join_fields
fields = join_fields(vol_discr.zeros(queue),
[vol_discr.zeros(queue) for i in range(vol_discr.dim)])
from logpyle import LogManager, \
add_general_quantities, \
add_run_info, \
IntervalTimer, EventCounter
# NOTE: LogManager hangs when using a file on a shared directory.
logmgr = LogManager(log_filename, "w", comm)
add_run_info(logmgr)
add_general_quantities(logmgr)
log_quantities =\
{"rank_data_swap_timer": IntervalTimer("rank_data_swap_timer",
"Time spent evaluating RankDataSwapAssign"),
"rank_data_swap_counter": EventCounter("rank_data_swap_counter",
"Number of RankDataSwapAssign instructions evaluated"),
"exec_timer": IntervalTimer("exec_timer",
"Total time spent executing instructions"),
"insn_eval_timer": IntervalTimer("insn_eval_timer",
"Time spend evaluating instructions"),
"future_eval_timer": IntervalTimer("future_eval_timer",
"Time spent evaluating futures"),
"busy_wait_timer": IntervalTimer("busy_wait_timer",
"Time wasted doing busy wait")}
for quantity in log_quantities.values():
logmgr.add_quantity(quantity)
bound_op = bind(vol_discr, op.sym_operator())
def rhs(t, w):
val, rhs.profile_data = bound_op(queue, profile_data=rhs.profile_data,
log_quantities=log_quantities,
t=t, w=w)
return val
rhs.profile_data = {}
dt = 0.04
dt_stepper = set_up_rk4("w", dt, fields, rhs)
logmgr.tick_before()
for event in dt_stepper.run(t_end=dt * num_steps):
if isinstance(event, dt_stepper.StateComputed):
logmgr.tick_after()
logmgr.tick_before()
logmgr.tick_after()
def print_profile_data(data):
print("""execute() for rank %d:
\tInstruction Evaluation: %f%%
\tFuture Evaluation: %f%%
\tBusy Wait: %f%%
\tTotal: %f seconds""" %
(comm.Get_rank(),
data['insn_eval_time'] / data['total_time'] * 100,
data['future_eval_time'] / data['total_time'] * 100,
data['busy_wait_time'] / data['total_time'] * 100,
data['total_time']))
print_profile_data(rhs.profile_data)
logmgr.close()
def mpi_communication_entrypoint():
cl_ctx = cl.create_some_context()
queue = cl.CommandQueue(cl_ctx)
actx = PyOpenCLArrayContext(queue)
from mpi4py import MPI
comm = MPI.COMM_WORLD
i_local_rank = comm.Get_rank()
num_parts = comm.Get_size()
from meshmode.distributed import MPIMeshDistributor, get_partition_by_pymetis
mesh_dist = MPIMeshDistributor(comm)
dim = 2
dt = 0.04
order = 4
if mesh_dist.is_mananger_rank():
from meshmode.mesh.generation import generate_regular_rect_mesh
mesh = generate_regular_rect_mesh(a=(-0.5, ) * dim,
b=(0.5, ) * dim,
nelements_per_axis=(16, ) * dim)
part_per_element = get_partition_by_pymetis(mesh, num_parts)
local_mesh = mesh_dist.send_mesh_parts(mesh, part_per_element,
num_parts)
else:
local_mesh = mesh_dist.receive_mesh_part()
vol_discr = DiscretizationCollection(actx,
local_mesh,
order=order,
mpi_communicator=comm)
source_center = np.array([0.1, 0.22, 0.33])[:local_mesh.dim]
source_width = 0.05
source_omega = 3
sym_x = sym.nodes(local_mesh.dim)
sym_source_center_dist = sym_x - source_center
sym_t = sym.ScalarVariable("t")
from grudge.models.wave import WeakWaveOperator
from meshmode.mesh import BTAG_ALL, BTAG_NONE
op = WeakWaveOperator(
0.1,
vol_discr.dim,
source_f=(
sym.sin(source_omega * sym_t) *
sym.exp(-np.dot(sym_source_center_dist, sym_source_center_dist) /
source_width**2)),
dirichlet_tag=BTAG_NONE,
neumann_tag=BTAG_NONE,
radiation_tag=BTAG_ALL,
flux_type="upwind")
from pytools.obj_array import flat_obj_array
fields = flat_obj_array(
vol_discr.zeros(actx),
[vol_discr.zeros(actx) for i in range(vol_discr.dim)])
# FIXME
# dt = op.estimate_rk4_timestep(vol_discr, fields=fields)
# FIXME: Should meshmode consider BTAG_PARTITION to be a boundary?
# Fails because: "found faces without boundary conditions"
# op.check_bc_coverage(local_mesh)
from logpyle import LogManager, \
add_general_quantities, \
add_run_info, \
IntervalTimer, EventCounter
log_filename = None
# NOTE: LogManager hangs when using a file on a shared directory.
# log_filename = "grudge_log.dat"
logmgr = LogManager(log_filename, "w", comm)
add_run_info(logmgr)
add_general_quantities(logmgr)
log_quantities =\
{"rank_data_swap_timer": IntervalTimer("rank_data_swap_timer",
"Time spent evaluating RankDataSwapAssign"),
"rank_data_swap_counter": EventCounter("rank_data_swap_counter",
"Number of RankDataSwapAssign instructions evaluated"),
"exec_timer": IntervalTimer("exec_timer",
"Total time spent executing instructions"),
"insn_eval_timer": IntervalTimer("insn_eval_timer",
"Time spend evaluating instructions"),
"future_eval_timer": IntervalTimer("future_eval_timer",
"Time spent evaluating futures"),
"busy_wait_timer": IntervalTimer("busy_wait_timer",
"Time wasted doing busy wait")}
for quantity in log_quantities.values():
logmgr.add_quantity(quantity)
logger.debug("\n%s", sym.pretty(op.sym_operator()))
bound_op = bind(vol_discr, op.sym_operator())
def rhs(t, w):
val, rhs.profile_data = bound_op(profile_data=rhs.profile_data,
log_quantities=log_quantities,
t=t,
w=w)
return val
rhs.profile_data = {}
dt_stepper = set_up_rk4("w", dt, fields, rhs)
final_t = 4
nsteps = int(final_t / dt)
logger.info("[%04d] dt %.5e nsteps %4d", i_local_rank, dt, nsteps)
# from grudge.shortcuts import make_visualizer
# vis = make_visualizer(vol_discr, vis_order=order)
step = 0
norm = bind(vol_discr, sym.norm(2, sym.var("u")))
from time import time
t_last_step = time()
logmgr.tick_before()
for event in dt_stepper.run(t_end=final_t):
if isinstance(event, dt_stepper.StateComputed):
assert event.component_id == "w"
step += 1
logger.debug("[%04d] t = %.5e |u| = %.5e ellapsed %.5e", step,
event.t, norm(u=event.state_component[0]),
time() - t_last_step)
# if step % 10 == 0:
# vis.write_vtk_file("rank%d-fld-%04d.vtu" % (i_local_rank, step),
# [("u", event.state_component[0]),
# ("v", event.state_component[1:])])
t_last_step = time()
logmgr.tick_after()
logmgr.tick_before()
logmgr.tick_after()
def print_profile_data(data):
logger.info(
"""execute() for rank %d:\n
\tInstruction Evaluation: %g\n
\tFuture Evaluation: %g\n
\tBusy Wait: %g\n
\tTotal: %g seconds""", i_local_rank,
data["insn_eval_time"] / data["total_time"] * 100,
data["future_eval_time"] / data["total_time"] * 100,
data["busy_wait_time"] / data["total_time"] * 100,
data["total_time"])
print_profile_data(rhs.profile_data)
logmgr.close()
logger.info("Rank %d exiting", i_local_rank)
def mpi_communication_entrypoint():
cl_ctx = cl.create_some_context()
queue = cl.CommandQueue(cl_ctx)
actx = PyOpenCLArrayContext(queue, force_device_scalars=True)
from mpi4py import MPI
comm = MPI.COMM_WORLD
i_local_rank = comm.Get_rank()
num_parts = comm.Get_size()
from meshmode.distributed import MPIMeshDistributor, get_partition_by_pymetis
mesh_dist = MPIMeshDistributor(comm)
dim = 2
order = 4
if mesh_dist.is_mananger_rank():
from meshmode.mesh.generation import generate_regular_rect_mesh
mesh = generate_regular_rect_mesh(a=(-0.5,)*dim,
b=(0.5,)*dim,
nelements_per_axis=(16,)*dim)
part_per_element = get_partition_by_pymetis(mesh, num_parts)
local_mesh = mesh_dist.send_mesh_parts(mesh, part_per_element, num_parts)
del mesh
else:
local_mesh = mesh_dist.receive_mesh_part()
dcoll = DiscretizationCollection(actx, local_mesh, order=order,
mpi_communicator=comm)
def source_f(actx, dcoll, t=0):
source_center = np.array([0.1, 0.22, 0.33])[:dcoll.dim]
source_width = 0.05
source_omega = 3
nodes = thaw(dcoll.nodes(), actx)
source_center_dist = flat_obj_array(
[nodes[i] - source_center[i] for i in range(dcoll.dim)]
)
return (
np.sin(source_omega*t)
* actx.np.exp(
-np.dot(source_center_dist, source_center_dist)
/ source_width**2
)
)
from grudge.models.wave import WeakWaveOperator
from meshmode.mesh import BTAG_ALL, BTAG_NONE
wave_op = WeakWaveOperator(
dcoll,
0.1,
source_f=source_f,
dirichlet_tag=BTAG_NONE,
neumann_tag=BTAG_NONE,
radiation_tag=BTAG_ALL,
flux_type="upwind"
)
fields = flat_obj_array(
dcoll.zeros(actx),
[dcoll.zeros(actx) for i in range(dcoll.dim)]
)
dt = actx.to_numpy(
2/3 * wave_op.estimate_rk4_timestep(actx, dcoll, fields=fields))
wave_op.check_bc_coverage(local_mesh)
from logpyle import LogManager, \
add_general_quantities, \
add_run_info
log_filename = None
# NOTE: LogManager hangs when using a file on a shared directory.
# log_filename = "grudge_log.dat"
logmgr = LogManager(log_filename, "w", comm)
add_run_info(logmgr)
add_general_quantities(logmgr)
def rhs(t, w):
return wave_op.operator(t, w)
dt_stepper = set_up_rk4("w", dt, fields, rhs)
final_t = 4
nsteps = int(final_t/dt)
logger.info("[%04d] dt %.5e nsteps %4d", i_local_rank, dt, nsteps)
step = 0
def norm(u):
return op.norm(dcoll, u, 2)
from time import time
t_last_step = time()
logmgr.tick_before()
for event in dt_stepper.run(t_end=final_t):
if isinstance(event, dt_stepper.StateComputed):
assert event.component_id == "w"
step += 1
logger.info("[%04d] t = %.5e |u| = %.5e ellapsed %.5e",
step, event.t,
norm(u=event.state_component[0]),
time() - t_last_step)
t_last_step = time()
logmgr.tick_after()
logmgr.tick_before()
logmgr.tick_after()
logmgr.close()
logger.info("Rank %d exiting", i_local_rank)
