def near(self):
id = int(str(self)[4:-1]) #unsafe!
pin15=Pin(15,Pin.OUT)
pin15.value(1)
adc=ADC(Pin(id))
adc.atten(ADC.ATTN_11DB)
approximate =adc.read()
pin15.value(0)
return approximate
def showVoltage():
from machine import ADC, Pin
adc = ADC(Pin(32))
vref = 1100
v = adc.read()
battery_voltage = (float(v) / 4095.0) * 2.0 * 3.3 * (vref / 1000.0)
# voltage = ("Voltage :" + str(battery_voltage) + "V")
voltage = ("Voltage: {0:0.2f}v".format(battery_voltage))
print(voltage)
ddd = voltage
return ddd
def bat():
from machine import ADC, Pin
import os
if os.uname()[0] == "esp8266":
bat = ADC(0)
else:
bat = ADC(Pin(35))
bat.atten(ADC.ATTN_11DB)
vl = bat.read()
mx = vl
mn = vl
for _ in range(11):
v = bat.read()
vl += v
if v > mx:
mx = v
if v < mn:
mn = v
vl = vl - mx - mn
if os.uname()[0] == "esp8266":
vl *= 0.573
else:
vl *= 0.176
return int(round(vl))
class Temperature:
def __init__(self, port):
if port == 0:
self.adc = ADC(5)
elif port == 1:
self.adc = ADC(7)
elif port == 2:
self.adc = ADC(3)
else:
raise Exception("Port# out of range")
self.table = [[
0, 2.5173462e1, -1.1662878, -1.0833638, -8.9773540 / 1e1,
-3.7342377 / 1e1, -8.6632643 / 1e2, -1.0450598 / 1e2,
-5.1920577 / 1e4
],
[
0, 2.508355e1, 7.860106 / 1e2, -2.503131 / 1e1,
8.315270 / 1e2, -1.228034 / 1e2, 9.804036 / 1e4,
-4.413030 / 1e5, 1.057734 / 1e6, -1.052755 / 1e8
],
[
-1.318058e2, 4.830222e1, -1.646031, 5.464731 / 1e2,
-9.650715 / 1e4, 8.802193 / 1e6, -3.110810 / 1e8
]]
def read(self):
volSum = 0
for i in range(20):
volSum += self.adc.read()
volSum /= 20
vol = (float(int(volSum) >> 5) / 1023.0 * 5.0 * 1000.0 - 350.0) / 54.16
kind = -1
value = 0.0
if vol >= -6.478 and vol < 0:
kind = 0
offset = 8
elif vol >= 0 and vol < 20.644:
kind = 1
offset = 9
elif vol >= 20.644 and vol <= 54.900:
kind = 2
offset = 6
if kind != -1:
value = self.table[kind][offset]
while offset >= 0:
offset -= 1
value = vol * value + self.table[kind][offset]
return value
class MPythonPin(Pin):
def __init__(self, pin, mode=PinMode.IN):
if mode not in [PinMode.IN, PinMode.OUT, PinMode.PWM, PinMode.ANALOG]:
raise TypeError("mode must be 'IN, OUT, PWM, ANALOG'")
if pin == 3:
raise TypeError("pin3 is used for resistance sensor")
if pin == 4:
raise TypeError("pin4 is used for light sensor")
if pin == 10:
raise TypeError("pin10 is used for sound sensor")
self.id = pins_remap_esp32[pin]
if mode == PinMode.IN:
super().__init__(self.id, Pin.IN, Pin.PULL_UP)
if mode == PinMode.OUT:
if pin == 2:
raise TypeError('pin2 only can be set "IN, ANALOG"')
super().__init__(self.id, Pin.OUT)
if mode == PinMode.PWM:
if pin == 2:
raise TypeError('pin2 only can be set "IN, ANALOG"')
self.pwm = PWM(Pin(self.id), duty=0)
if mode == PinMode.ANALOG:
if pin not in [0, 1, 2, 3, 4, 10]:
raise TypeError('the pin can~t be set as analog')
self.adc = ADC(Pin(self.id))
self.adc.atten(ADC.ATTN_11DB)
self.mode = mode
def read_digital(self):
if not self.mode == PinMode.IN:
raise TypeError('the pin is not in IN mode')
return super().value()
def write_digital(self, value):
if not self.mode == PinMode.OUT:
raise TypeError('the pin is not in OUT mode')
super().value(value)
def read_analog(self):
if not self.mode == PinMode.ANALOG:
raise TypeError('the pin is not in ANALOG mode')
return self.adc.read()
def write_analog(self, duty, freq=1000):
if not self.mode == PinMode.PWM:
raise TypeError('the pin is not in PWM mode')
self.pwm.freq(freq)
self.pwm.duty(duty)
class Flamingo:
def __init__(self, machine_config):
self.battery_reader = ADC(Pin(35))
self.battery_reader.atten(ADC.ATTN_11DB)
self.battery_threshold = machine_config['battery_threshold']
self.battery_led = Pin(machine_config['battery_led'], Pin.OUT)
self.battery_level = self.batteryCheck()
#self.led_strip1 = Pin(led_strip1, Pin.OUT)
#self.led_strip2 = Pin(led_strip2, Pin.OUT)
self.button1 = Pin(machine_config['button1'], Pin.IN)
self.button2 = Pin(machine_config['button2'], Pin.IN)
self.button3 = Pin(machine_config['button3'], Pin.IN)
self.battery_led.value(0)
self.power_switch = Pin(machine_config['power_switch'], Pin.IN)
esp32.wake_on_ext0(pin=self.power_switch, level=esp32.WAKEUP_ANY_HIGH)
def batteryCheck(self):
self.battery_level = (self.battery_reader.read() /
4095) * 2 * 3.3 * 1.1
warning = False
if (self.battery_level < self.battery_threshold):
warning = True
return self.battery_level
def toggleLed(self, led):
led.value(not (led.value()))
def putToSleep(self):
deepsleep()
async def flashLed(self, json):
json = ujson.loads(json)
self.led_strip1.value(1)
self.led_strip2.value(1)
print("strips on")
try:
on_for = int(json['on_for'])
except Exception:
on_for = 1200
print("invalid json: on_for")
await asyncio.sleep_ms(on_for)
self.led_strip1.value(0)
self.led_strip2.value(0)
print("strips off")
class MPythonPin(Pin):
def __init__(self, pin, mode=PinMode.IN):
if mode not in [PinMode.IN, PinMode.OUT, PinMode.PWM, PinMode.ANALOG]:
raise TypeError("mode must be 'IN, OUT, PWM, ANALOG'")
if pin == 3:
raise TypeError("pin3 is used for resistance sensor")
if pin == 4:
raise TypeError("pin4 is used for light sensor")
if pin == 10:
raise TypeError("pin10 is used for sound sensor")
self.id = pins_remap_esp32[pin]
if mode == PinMode.IN:
super().__init__(self.id, Pin.IN, Pin.PULL_UP)
if mode == PinMode.OUT:
if pin == 2:
raise TypeError('pin2 only can be set "IN, ANALOG"')
super().__init__(self.id, Pin.OUT)
if mode == PinMode.PWM:
if pin == 2:
raise TypeError('pin2 only can be set "IN, ANALOG"')
self.pwm = PWM(Pin(self.id), duty=0)
if mode == PinMode.ANALOG:
if pin not in [0, 1, 2, 3, 4, 10]:
raise TypeError('the pin can~t be set as analog')
self.adc = ADC(Pin(self.id))
self.adc.atten(ADC.ATTN_11DB)
self.mode = mode
def read_digital(self):
if not self.mode == PinMode.IN:
raise TypeError('the pin is not in IN mode')
return super().value()
def write_digital(self, value):
if not self.mode == PinMode.OUT:
raise TypeError('the pin is not in OUT mode')
super().value(value)
def read_analog(self):
if not self.mode == PinMode.ANALOG:
raise TypeError('the pin is not in ANALOG mode')
return self.adc.read()
def write_analog(self, duty, freq=1000):
if not self.mode == PinMode.PWM:
raise TypeError('the pin is not in PWM mode')
self.pwm.freq(freq)
self.pwm.duty(duty)
class Oven:
def __init__(self):
self.ignore = 50 # potentiometer offset
self.pot = ADC(0)
self.grill = PWM(Pin(14), 5000)
self.top = 0
def update_temp(self):
pot_value = self.pot.read()
print(pot_value)
if pot_value > self.ignore:
self.top = pot_value
else:
self.top = 0
self.grill.duty(self.top)
class Current:
def __init__(self, port):
if port == 0:
self.adc = ADC(0)
elif port == 1:
self.adc = ADC(4)
elif port == 2:
self.adc = ADC(6)
else:
raise Exception("Port# out of range")
def read(self):
currentSum = 0
for i in range(100):
currentSum += (self.adc.read() * 3.3 / 4096 * 1000 - 1355) * 5
return currentSum / 100
class PM():
def __init__(self):
self.pin = [16, 5, 4, 0, 2, 14, 12, 13, 15, 3, 1, 9, 10] #GPIO->pin
self.pin1 = Pin(self.pin[1], Pin.OUT)
self.pin8 = Pin(self.pin[8], Pin.OUT)
self.pin8.value(1)
self.adc = ADC(0)
def pm_value(self):
self.pin1.value(0)
time.sleep_us(280)
value = self.adc.read()
time.sleep_us(40)
self.pin1.value(1)
time.sleep_us(9680)
return value + 270
def water_reader():
""" Give the status of rain (True or False) """
digital_input = ADC(0)
water_level = digital_input.read()
status = 0
if water_level <= 100:
status = 0
else:
status = 1
return {
"status" : status,
"level" : water_level
}
def generate_seed(readings=20):
"""Generates a seed using noise from the analog pin.
Args:
readings (int): number of readings to take from the analog pin
Returns:
(str): number to use as a seed for the random generator
"""
adc = ADC(0)
seed = 0
for s in range(readings):
seed += adc.read()
time.sleep_ms(10)
print(''.join(['random seed: ', str(seed)]))
return seed
class soilADC:
def __init__(self, pin):
self.pin = pin
try:
#check if pin is available for input by checking dictionary of GPIOs
if pin in adcDict:
self.soil = ADC(Pin(pin))
else:
raise OSError
except OSError:
print('GPIO', pin, 'not suitable for ADC')
print('Choose from:', adcDict)
def moistureLevel(self):
moisture = self.soil.read()
return moisture
def leer_dato_uv(pin_adc):
""" Esta funcion es para leer los
datos provenientes de los canales del ADC
ademas esta la caracterizacion del sensor UV ML8511
caracterizacion y = 0.1625x + 1.0
x = (y - 1.0)/0.1625 mW/cm^2
"""
adc = ADC(Pin(pin_adc))
adc.atten(ADC.ATTN_11DB)
adc.width(ADC.WIDTH_10BIT)
y = adc.read() * 3.3 / 1024
if y < 1:
x = 0
else:
x = (y - 1.0) / 0.1625
return x
class Thumbslide:
x_center = 1580
y_center = 1769
def __init__(self, pinx, piny, atten=ADC.ATTN_11DB, width=ADC.WIDTH_12BIT, tolerance=300):
self._pinX = pinx
self._pinY = piny
self._tolerance = tolerance
ADC.vref(vref=1150)
self._x = ADC(Pin(self._pinX))
self._x.atten(atten)
self._x.width(width)
self._y = ADC(Pin(self._pinY))
self._y.atten(atten)
self._y.width(width)
self._angle = 0
@property
def X(self):
return self._x
@property
def Y(self):
return self._y
def read(self):
return array('i', self._x.read(), self._y.read())
def readX(self):
return self._x.read()
def readY(self):
return self._y.read()
def _get_internal_calc_xy_dist(self, x, y):
x = x if x else self._x.read()
y = y if y else self._y.read()
x_dist = x - Thumbslide.x_center
y_dist = y - Thumbslide.y_center
return x_dist, y_dist
def moved(self, x=None, y=None):
x_dist, y_dist = self._get_internal_calc_xy_dist(x, y)
dist = math.sqrt(math.pow(x_dist, 2) + math.pow(y_dist, 2))
return dist >= self._tolerance
def angle(self, x=None, y=None):
x_dist, y_dist = self._get_internal_calc_xy_dist(x, y)
return math.atan2(y_dist, x_dist)
def photo_resistor():
client = MQTTClient(CLIENT_ID, SERVER)
client.connect()
sensor = ADC(0)
while True:
try:
value = sensor.read()
if isinstance(value, int):
value = str(value)
msg = value
print("Message:", msg)
client.publish(TOPIC, msg)
except OSError:
print("System Error")
# sleep(3600) # one hour
sleep(10) # for testing
class VoltMeter:
"""
Driver measure DC battery voltage.
"""
def __init__(self,
pin,
factor: float = 0.00718,
nSamples=100,
interval=100):
"""
pin: Input pin number
factor: Calibration coefficient
nSamples: Number of averaged samples
interval: Time interval in milliseconds between samples
"""
self._pin = ADC(Pin(pin))
self._pin.atten(ADC.ATTN_11DB)
self._nSamples = nSamples
self._interval = interval
self._factor = factor
self._sum: float = 0
# Start the main task
self.pulse_task = asyncio.create_task(self._run())
async def _run(self):
"""
Read the analog input and average the samples
"""
while True:
value = 0
for _ in range(self._nSamples):
value += self._pin.read()
await asyncio.sleep_ms(self._interval)
self._sum = value
# ----------------------------------------------------------
def getVoltage(self):
"""
Returns the voltage (V)
"""
return self._sum / self._nSamples * self._factor
class BatteryVoltage:
def __init__(self):
# Setup ADC:
self.batv = ADC(Pin(35)) # Analog A13 -- battery monitor
# Set attenuation and bit width:
self.batv.atten(ADC.ATTN_11DB)
self.batv.width(ADC.WIDTH_12BIT)
def read(self):
return self.batv.read()
def get_volt(self, val):
return val * _SCALE
def read_volt(self):
return self.get_volt(self.read())
def leer_polvo(DPIN, APIN):
"""Definici0n de pines
para el sensor de polvo GP2Y1010AU0F
"""
p13 = Pin(DPIN, Pin.OUT)
adc = ADC(Pin(APIN))
adc.atten(ADC.ATTN_11DB)
adc.width(ADC.WIDTH_10BIT)
#proceso de lectura para el sensor
p13.off()
utime.sleep_us(280)
V1 = adc.read() * 3.3 / 1024
utime.sleep_us(40)
p13.on()
utime.sleep_us(9680)
dust_density = 0.17 * V1 - 0.1
return dust_density
class SaltData:
def __init__(self, salt_pin=34, samples=120):
self.SALT_PIN = Pin(salt_pin)
self.SAMPLES = samples
self.SALT_ADC = ADC(self.SALT_PIN)
def salt_data(self):
data_cumulative = []
salt = 0
for i in range(self.SAMPLES):
data_cumulative.append(self.SALT_ADC.read())
sleep_ms(20)
for item in data_cumulative:
if item == 0 or item == (self.SAMPLES - 1):
pass
else:
salt += item
return salt / (self.SAMPLES - 2)
class linear_encoder:
def __init__(self, adc_pin, a, b):
from machine import ADC, Pin
self.a = a
self.b = b
self.adc_in = ADC(Pin(adc_pin))
self.adc_in.atten(ADC.ATTN_11DB)
self.adc_in.width(ADC.WIDTH_12BIT)
def read(self):
x = self.adc_in.read()
y = self.a * x + self.b
return y
def deinit(self):
self.adc_in.deinit()
def readMoistureSensor(CONFIG):
import gc
gc.collect()
from machine import ADC
gc.collect()
# Set up ADC conversion
adc = ADC(CONFIG['MOISTURE_PIN'])
# Read Sensor and return value as %
moisture = map_values(adc.read(), CONFIG['MOISTURE_SENSOR_AIR_VALUE'],
CONFIG['MOISTURE_SENSOR_WATER_VALUE'], 0, 100)
if moisture > 100:
moisture = 100
elif moisture < 0:
moisture = 0
return moisture
def leer_MQ(pin_adc, A, b, Ro):
""" Esta funcion es para leer los
datos de los sensores MQ que tienen un comportamiento
ppm = ARo/Rs**(1/b)"""
Rl = 1000 # Ohms
Vref = 5 # Volts
""" Lectura del canal analogico """
adc = ADC(Pin(pin_adc))
adc.atten(ADC.ATTN_11DB)
adc.width(ADC.WIDTH_10BIT)
Vo = adc.read() * 3.3 / 1024
if Vo == 0:
Rs = 0.0000000000000000001
""" Conversion del voltaje a ppm"""
else:
Rs = Rl * (Vref - Vo) / Vo
ppm = (A * Ro / Rs)**(1 / b)
return ppm
class Temp():
def __init__(self, pin):
from machine import ADC, Pin
self.adc = ADC(Pin(pin, Pin.IN))
self.adc.atten(ADC.ATTN_11DB) # 0-3.9V
def value(self):
adc_val = self.adc.read()
Vout = (adc_val) * 3.9 / 4095.0
if 0 < Vout and Vout < 3.9: # -26.9 and 160.5
Rt = int(((3.28 / Vout) - 1) *
51) / 100 # Sampling Resistance is 5.1K ohm * 51 / self.R
# print(Rt)
import math
T1 = 1 / (_T + math.log(Rt) / B) - Tp
return T1
print('ADC Value Error!')
return None
class AnalogIn(object):
"""Basic analog input."""
def __init__(self, pin, attn=ATTN_11DB, width=WIDTH_12BIT):
self._pin = ADC(Pin(pin))
self._pin.atten(ATTN[attn])
self._pin.width(WIDTH[width])
self._max_adc = 2**(9 + WIDTH[width]) - 1
def deinit(self):
self._pin = None
@property
def value(self):
return self._pin.read()
@property
def max_adc(self):
return self._max_adc
class BatteryReader(Sensor):
def __init__(self, pin_num=33, calibration_func=lambda x: x):
"""
Initiate the battery reader algorithm
:param pin_num: The pin number on the ESP32 to read off the battery voltage from
:param calibration_func: A function to transform this class's best guess at the
battery voltage into something closer. Accepts and returns a float.
ESP32 ADC pins)
"""
# Resistor values in the voltage divider design here:
# https://www.notion.so/Preliminary-Design-Report-2d0a06e271614ae886e7a2b3f88f93aa
self.R1 = 33.2
self.R2 = 100
self.calibration_func = calibration_func
self.battery_pin = Pin(pin_num)
# Set up variables to calculate battery voltage
self.adc_battery_pin = ADC(self.battery_pin)
self.adc_resolution = 1024
# Set maximum voltage readable by ADC pin to 3.6V
self.adc_battery_pin.atten(ADC.ATTN_11DB)
self.max_readable_voltage = 3.6
def read(self):
"""
Calculates the voltage of the battery attached
:return: A dictionary containing the battery voltage
"""
adc_value = self.adc_battery_pin.read()
print("ADC value for the battery pin: " + str(adc_value))
voltage_at_adc_pin = (self.max_readable_voltage *
adc_value) / self.adc_resolution
print("Voltage at pin: " + str(voltage_at_adc_pin))
voltageDivFactor = (self.R1 + self.R2) / self.R2
battery_voltage = self.calibration_func(voltage_at_adc_pin *
voltageDivFactor)
print("Battery voltage calibrated: " + str(battery_voltage))
return {"voltage": battery_voltage}
def getBattery():
MAX_BATTERY_VOLTAGE = 4400 # 1.1V / 100kOhm * 400kOhm
LOW_BATTERY_VOLTAGE = 3250
MIN_BATTERY_VOLTAGE = 3005
adc = ADC(Pin(34)) # create ADC object on ADC pin
adc.atten(ADC.ATTN_6DB) # set 6 dB input attenuation (voltage range roughly 0.0v - 2 v)
adc.width(ADC.WIDTH_12BIT) # set 12 bit return values (returned range 0-4095)
count = adc.read() # read value using the newly configured attenuation and width
Vbat = count*1000/512
print ('Battery Voltage = {} mV'.format(int(round(Vbat,0))))
if Vbat > LOW_BATTERY_VOLTAGE:
dot(7, 7, GREEN)
elif Vbat >= MIN_BATTERY_VOLTAGE and Vbat <= LOW_BATTERY_VOLTAGE:
dot(7, 7, YELLOW)
else:
dot(7, 7, RED)
class Analog(homie.Property):
maxes=[1,1.34,2,3.6]
def __init__(self, prop_id, prop_name, pin, period, bits=10, attn=0):
super(Analog, self).__init__(prop_id, prop_name, "float", None, "0:{}".format(Analog.maxes[attn]), 0)
if config["esp32"]:
pin = Pin(pin)
self.adc = ADC(pin)
if config["esp32"]:
self.adc.atten(attn)
self.adc.width(bits-9)
self.period = period
self.range = (2**bits)-1
self.max = Analog.maxes[attn]
def periodic(self, cur_time):
if (cur_time % self.period) == 0:
value = self.adc.read()
print(value)
self.send_value(str(self.max*value/self.range))
def __get_resistance():
"""
Returns the resistance of the sensor in kOhms // -1 if not value got in pin
10.0 - 'RLOAD' The load resistance on the board
"""
global __ADC, __ADC_PROP
if __ADC is None:
if 'esp8266' in platform:
__ADC = ADC(physical_pin('co2')) # 1V measure range
__ADC_PROP = (1023, 1.0)
else:
__ADC = ADC(Pin(physical_pin('co2')))
__ADC.atten(ADC.ATTN_11DB) # 3.6V measure range
__ADC.width(ADC.WIDTH_10BIT) # Default 10 bit ADC
__ADC_PROP = (1023, 3.6)
value = __ADC.read()
if value == 0:
return -1
return (float(__ADC_PROP[0]) / value - 1.) * 10.0
class GP2D12:
def __init__(self, pin):
self.pin = Pin(pin)
self.adc = ADC(self.pin)
self.adc.atten(self.adc.ATTN_6DB)
def get_dist(self):
"""Retourne la distance en centimètres. La formule a été
calculée a partir de mesures manuelles et d'interpolation
polynomiale avec numpy.
"""
x = self.adc.read()
d = -1.525*10**-8*x**3+8.809*10**-5*x**2-0.1596*x+112.6
if d > 90:
return 100
elif d < 25:
return 0
return d
class SoilSensor:
def __init__(self, adc_pin, air_value, water_value):
self._adc = ADC(Pin(adc_pin))
self._adc.atten(ADC.ATTN_11DB)
self._air_value = air_value
self._water_value = water_value
def read_data(self):
moisture_value = self._adc.read()
moisture_level = self._to_percent(moisture_value)
category = self._categorize_moisture_value(moisture_value)
return array('i', (moisture_value, moisture_level, category))
def _to_percent(self, moisture_value):
if moisture_value < self._water_value:
converted_value = 0
elif moisture_value > self._air_value:
converted_value = 100
else:
delta = self._air_value - moisture_value
divisor = self._air_value - self._water_value
converted_value = int((delta / divisor) * 100)
return converted_value
def _categorize_moisture_value(self, moisture_value):
intervals = int((self._air_value - self._water_value) / 3)
upper_water_value = self._water_value + intervals
lower_air_value = self._air_value - intervals
if self._water_value <= moisture_value < upper_water_value:
category = VERY_WET
elif upper_water_value <= moisture_value < lower_air_value:
category = WET
elif lower_air_value <= moisture_value <= self._air_value:
category = DRY
else:
category = UNCATEGORIZED
return category
class Battery:
def __init__(self, transport=None):
self.ID = 5
self.transport = transport
self.adc = None
self._setup()
def _setup(self):
self.adc = ADC(Pin(battery_pins['adc']))
self.adc.atten(ADC.ATTN_11DB)
def _format(self, reading):
return "{},{},{:.2f}".format(location_id, self.ID,
self._convert_to_percentage(reading))
def _send(self, payload):
# If has transnport then send
if self.transport is None:
print('Cannot send battery reading without a defined transport')
return
self.transport.broadcast(payload)
def _convert_to_percentage(self, reading):
percent = int((reading - 0) * (100 - 0) / (4095 - 0) + 0)
if percent < 0:
return 0
if percent > 100:
return 100
return percent
def read(self, autosend=True, autosleep=True):
raw_reading = self.adc.read()
if autosend:
payload = self._format(raw_reading)
self._send(payload)
return raw_reading
# Complete project details at https://RandomNerdTutorials.com # Created by Rui Santos from machine import Pin, ADC, PWM from time import sleep led = Pin(2, Pin.OUT) button = Pin(15, Pin.IN) #Configure ADC for ESP32 pot = ADC(Pin(34)) pot.width(ADC.WIDTH_10BIT) pot.atten(ADC.ATTN_11DB) #Configure ADC for ESP8266 #pot = ADC(0) led_pwm = PWM(Pin(4),5000) while True: button_state = button.value() led.value(button_state) pot_value = pot.read() led_pwm.duty(pot_value) sleep(0.1)
class ADCSensor:
def __init__(self,pin):
self.adc=ADC(Pin(pin))
self.adc.atten(ADC.ATTN_11DB)
def read(self):
return self.adc.read()
