def test_autoremediation_from_fault(self):
"""
Transition the state machine into the unexpected fault state, then
verify that it transitions itself back to WaitInform after an Inform
is received.
"""
sm = EnodebAcsStateMachineBuilder.build_acs_state_machine(
EnodebDeviceName.BAICELLS,
)
# Send an initial inform
inform_msg = Tr069MessageBuilder.get_inform(
'48BF74',
'BaiBS_RTS_3.1.6',
'120200002618AGP0003',
['2 PERIODIC'],
)
resp = sm.handle_tr069_message(inform_msg)
self.assertTrue(
isinstance(resp, models.InformResponse),
'Should respond with an InformResponse',
)
# Now send a fault
req = models.Fault()
req.FaultCode = 12345
req.FaultString = 'Test FaultString'
sm.handle_tr069_message(req)
self.assertTrue('Error' in sm.get_state(), 'Should be in error state')
# Send the Inform again, verify SM transitions out of fault
resp = sm.handle_tr069_message(inform_msg)
self.assertTrue(isinstance(resp, models.DummyInput))
self.assertEqual('Waiting for an Inform', sm.get_state())
def provision_clean_sm(state=None):
acs_state_machine = EnodebAcsStateMachineBuilder.build_acs_state_machine(
EnodebDeviceName.BAICELLS_QRTB)
acs_state_machine.desired_cfg = EnodebConfiguration(
BaicellsQRTBTrDataModel(), )
if state is not None:
acs_state_machine.transition(state)
return acs_state_machine
def setUp(self):
# Set up the ACS
self.enb_acs_manager = EnodebAcsStateMachineBuilder.build_acs_manager()
self.handler = EnodebAcsStateMachineBuilder.build_acs_state_machine()
AutoConfigServer.set_state_machine_manager(self.enb_acs_manager)
def side_effect(*args, **_kwargs):
msg = args[1]
return msg
self.p = patch.object(AutoConfigServer, '_handle_tr069_message',
Mock(side_effect=side_effect))
self.p.start()
self.app = Tr069Application([AutoConfigServer],
models.CWMP_NS,
in_protocol=Tr069Soap11(validator='soft'),
out_protocol=Tr069Soap11())
def test_manual_reboot_during_provisioning(self) -> None:
"""
Test a scenario where a Magma user goes through the enodebd CLI to
reboot the Sercomm eNodeB.
This checks the scenario where the command is sent in the middle
of a TR-069 provisioning session.
"""
logging.root.level = logging.DEBUG
acs_state_machine = EnodebAcsStateMachineBuilder.build_acs_state_machine(
EnodebDeviceName.FREEDOMFI_ONE)
# Send an Inform message, wait for an InformResponse
inform = Tr069MessageBuilder.get_inform(
oui="000E8F",
sw_version="TEST3920@210901",
enb_serial="2006CW5000023",
)
resp = acs_state_machine.handle_tr069_message(inform)
self.assertTrue(
isinstance(resp, models.InformResponse),
'Should respond with an InformResponse',
)
# Send an empty http request to kick off the rest of provisioning
req = models.DummyInput()
resp = acs_state_machine.handle_tr069_message(req)
# Expect a request for an optional parameter, three times
self.assertTrue(
isinstance(resp, models.GetParameterValues),
'State machine should be requesting param values',
)
req = Tr069MessageBuilder.get_fault()
# User uses the CLI tool to get eNodeB to reboot
acs_state_machine.reboot_asap()
resp = acs_state_machine.handle_tr069_message(req)
self.assertTrue(
isinstance(resp, models.Reboot),
'In reboot sequence, state machine should send a '
'Reboot message.',
)
req = Tr069MessageBuilder.get_reboot_response()
resp = acs_state_machine.handle_tr069_message(req)
self.assertTrue(
isinstance(resp, models.DummyInput),
'State machine should end TR-069 session after '
'receiving a RebootResponse',
)
self.assertIsInstance(acs_state_machine.state, WaitInformMRebootState)
inform = Tr069MessageBuilder.get_inform(event_codes=["M Reboot"], )
resp = acs_state_machine.handle_tr069_message(inform)
self.assertIsInstance(resp, models.InformResponse)
self.assertIsInstance(acs_state_machine.state,
FreedomFiOneGetInitState)
def build_freedomfi_one_acs_state_machine(self):
service = EnodebAcsStateMachineBuilder.build_magma_service(
mconfig=EnodebConfigBuilder.get_mconfig(),
service_config=self._get_service_config(),
)
handler_class = get_device_handler_from_name(
EnodebDeviceName.FREEDOMFI_ONE, )
acs_state_machine = handler_class(service)
return acs_state_machine
def test_transition_depending_on_sas_enabled_flag(
self,
dp_mode,
expected_state,
mock_get_state,
):
"""Testing if SM steps in and out of FreedomFiOneWaitNotifyDPState as per state map depending on whether
sas_enabled param is set to True or False in the service config
Args:
dp_mode: bool flag to enable or disable dp mode
expected_state (Any): State
mock_get_state (Any): mocking get_cbsd_state method
"""
mock_get_state.return_value = MOCK_CBSD_STATE
acs_state_machine = EnodebAcsStateMachineBuilder.build_acs_state_machine(
EnodebDeviceName.FREEDOMFI_ONE)
acs_state_machine._service.config = _get_service_config(
dp_mode=dp_mode)
acs_state_machine.desired_cfg = build_desired_config(
acs_state_machine.mconfig,
acs_state_machine.service_config,
acs_state_machine.device_cfg,
acs_state_machine.data_model,
acs_state_machine.config_postprocessor,
)
# Need to fill these values in the device_cfg if we're going to transition to notify_dp state
acs_state_machine.device_cfg.set_parameter(SASParameters.SAS_USER_ID,
'test_user')
acs_state_machine.device_cfg.set_parameter(SASParameters.SAS_FCC_ID,
'test_fcc')
acs_state_machine.device_cfg.set_parameter(ParameterName.SERIAL_NUMBER,
'test_sn')
acs_state_machine.transition('check_wait_get_params')
msg = Tr069MessageBuilder.param_values_qrtb_response(
[], models.GetParameterValuesResponse)
# SM should transition from check_wait_get_params to end_session -> notify_dp automatically
# upon receiving response from the radio
acs_state_machine.handle_tr069_message(msg)
self.assertIsInstance(acs_state_machine.state, expected_state)
msg = Tr069MessageBuilder.get_inform(event_codes=['1 BOOT'])
# SM should go into wait_inform state, respond with Inform response and transition to FreedomFiOneGetInitState
acs_state_machine.handle_tr069_message(msg)
self.assertIsInstance(acs_state_machine.state,
FreedomFiOneGetInitState)
def test_manual_reboot_during_provisioning(self) -> None:
"""
Test a scenario where a Magma user goes through the enodebd CLI to
reboot the Baicells eNodeB.
This checks the scenario where the command is sent in the middle
of a TR-069 provisioning session.
"""
acs_state_machine = EnodebAcsStateMachineBuilder.build_acs_state_machine(
EnodebDeviceName.BAICELLS_QRTB)
# Send an Inform message, wait for an InformResponse
inform_msg = Tr069MessageBuilder.get_qrtb_inform(
params=DEFAULT_INFORM_PARAMS,
oui='48BF74',
enb_serial='1202000181186TB0006',
event_codes=['2 PERIODIC'],
)
resp = acs_state_machine.handle_tr069_message(inform_msg)
self.assertTrue(
isinstance(resp, models.InformResponse),
'Should respond with an InformResponse',
)
# Send an empty http request to kick off the rest of provisioning
req = models.DummyInput()
resp = acs_state_machine.handle_tr069_message(req)
# Expect a request for an optional parameter, three times
self.assertTrue(
isinstance(resp, models.GetParameterValues),
'State machine should be requesting param values',
)
req = Tr069MessageBuilder.get_fault()
# User uses the CLI tool to get eNodeB to reboot
acs_state_machine.reboot_asap()
resp = acs_state_machine.handle_tr069_message(req)
self.assertTrue(
isinstance(resp, models.Reboot),
'In reboot sequence, state machine should send a '
'Reboot message.',
)
req = Tr069MessageBuilder.get_reboot_response()
resp = acs_state_machine.handle_tr069_message(req)
self.assertTrue(
isinstance(resp, models.DummyInput),
'State machine should end TR-069 session after '
'receiving a RebootResponse',
)
def test_notify_dp_sets_values_received_by_dp_in_desired_config(
self, mock_get_state) -> None:
expected_final_param_values = {
ParameterName.UL_BANDWIDTH: '100',
ParameterName.DL_BANDWIDTH: '100',
ParameterName.EARFCNUL: 55340,
ParameterName.EARFCNDL: 55340,
ParameterName.POWER_SPECTRAL_DENSITY: 34,
}
test_user = '******'
test_fcc_id = 'fcc_id'
test_serial_number = '123'
acs_state_machine = EnodebAcsStateMachineBuilder.build_acs_state_machine(
EnodebDeviceName.BAICELLS_QRTB)
acs_state_machine.desired_cfg = EnodebConfiguration(
BaicellsQRTBTrDataModel())
acs_state_machine.device_cfg.set_parameter(ParameterName.SAS_USER_ID,
test_user)
acs_state_machine.device_cfg.set_parameter(ParameterName.SAS_FCC_ID,
test_fcc_id)
acs_state_machine.device_cfg.set_parameter(ParameterName.SERIAL_NUMBER,
test_serial_number)
for param in expected_final_param_values:
with self.assertRaises(KeyError):
acs_state_machine.desired_cfg.get_parameter(param)
# Skip previous steps not to duplicate the code
acs_state_machine.transition('check_wait_get_params')
req = Tr069MessageBuilder.param_values_qrtb_response(
[],
models.GetParameterValuesResponse,
)
mock_get_state.return_value = MOCK_CBSD_STATE
resp = acs_state_machine.handle_tr069_message(req)
mock_get_state.assert_called_with(
CBSDRequest(serial_number=test_serial_number), )
self.assertTrue(isinstance(resp, models.DummyInput))
for param, value in expected_final_param_values.items():
self.assertEqual(
value,
acs_state_machine.desired_cfg.get_parameter(param),
)
def _check_postprocessing(self, expected, service_cfg):
cfg_desired = Mock()
acs_state_machine = EnodebAcsStateMachineBuilder.build_acs_state_machine(
EnodebDeviceName.FREEDOMFI_ONE)
acs_state_machine.device_cfg.set_parameter(
ParameterName.SERIAL_NUMBER,
"2006CW5000023",
)
cfg_init = FreedomFiOneConfigurationInitializer(acs_state_machine)
cfg_init.postprocess(
EnodebConfigBuilder.get_mconfig(),
service_cfg,
cfg_desired,
)
cfg_desired.assert_has_calls(expected)
def test_manual_reboot(self) -> None:
"""
Test a scenario where a Magma user goes through the enodebd CLI to
reboot the Baicells eNodeB.
This checks the scenario where the command is not sent in the middle
of a TR-069 provisioning session.
"""
acs_state_machine = EnodebAcsStateMachineBuilder.build_acs_state_machine(
EnodebDeviceName.BAICELLS_QRTB)
# User uses the CLI tool to get eNodeB to reboot
acs_state_machine.reboot_asap()
# And now the Inform message arrives from the eNodeB
inform_msg = \
Tr069MessageBuilder.get_qrtb_inform(
params=DEFAULT_INFORM_PARAMS,
oui='48BF74',
enb_serial='1202000181186TB0006',
event_codes=['2 PERIODIC'],
)
resp = acs_state_machine.handle_tr069_message(inform_msg)
self.assertTrue(
isinstance(resp, models.InformResponse),
'In reboot sequence, state machine should still '
'respond to an Inform with InformResponse.',
)
req = models.DummyInput()
resp = acs_state_machine.handle_tr069_message(req)
self.assertTrue(
isinstance(resp, models.Reboot),
'In reboot sequence, state machine should send a '
'Reboot message.',
)
req = Tr069MessageBuilder.get_reboot_response()
resp = acs_state_machine.handle_tr069_message(req)
self.assertTrue(
isinstance(resp, models.DummyInput),
'State machine should end TR-069 session after '
'receiving a RebootResponse',
)
def _get_manager(self) -> StateMachineManager:
service = EnodebAcsStateMachineBuilder.build_magma_service()
return StateMachineManager(service)
def _get_acs(self):
""" Get a dummy ACS statemachine for tests"""
service = EnodebAcsStateMachineBuilder.build_magma_service()
return DummyHandler(service)
def test_provision(self, mock_get_state) -> None:
"""
Test the basic provisioning workflow
1 - enodeb sends Inform, enodebd sends InformResponse
2 - enodeb sends empty HTTP message,
3 - enodebd sends get transient params, updates the device state.
4 - enodebd sends get param values, updates the device state
5 - enodebd, sets fields including SAS fields.
Args:
mock_get_state (Any): mocking get_cbsd_state method
"""
mock_get_state.return_value = MOCK_CBSD_STATE
logging.root.level = logging.DEBUG
acs_state_machine = EnodebAcsStateMachineBuilder.build_acs_state_machine(
EnodebDeviceName.FREEDOMFI_ONE)
acs_state_machine._service.config = _get_service_config()
acs_state_machine.desired_cfg = build_desired_config(
acs_state_machine.mconfig,
acs_state_machine.service_config,
acs_state_machine.device_cfg,
acs_state_machine.data_model,
acs_state_machine.config_postprocessor,
)
inform = Tr069MessageBuilder.get_inform(
oui="000E8F",
sw_version="TEST3920@210901",
enb_serial="2006CW5000023",
)
resp = acs_state_machine.handle_tr069_message(inform)
self.assertTrue(
isinstance(resp, models.InformResponse),
'Should respond with an InformResponse',
)
# Send an empty http request
req = models.DummyInput()
resp = acs_state_machine.handle_tr069_message(req)
# Expect a request for read-only params
self.assertTrue(
isinstance(resp, models.GetParameterValues),
'State machine should be requesting param values',
)
for tr69nodes in StatusParameters.STATUS_PARAMETERS.values():
self.assertIn(tr69nodes.path, resp.ParameterNames.string)
req = self._get_ff_one_read_only_param_values_resp()
get_resp = acs_state_machine.handle_tr069_message(req)
self.assertTrue(
isinstance(get_resp, models.GetParameterValues),
'State machine should be requesting param values',
)
req = self._get_freedomfi_one_param_values_response()
resp = acs_state_machine.handle_tr069_message(req)
self.assertTrue(
isinstance(resp, models.SetParameterValues),
'State machine should be setting parameters',
)
self.assertIsNotNone(
resp.ParameterKey.Data,
'ParameterKey should be set for FreedomFiOne eNB',
)
msg = models.SetParameterValuesResponse()
msg.Status = 1
get_resp = acs_state_machine.handle_tr069_message(msg)
self.assertTrue(
isinstance(get_resp, models.GetParameterValues),
'We should read back all parameters',
)
req = self._get_freedomfi_one_param_values_response()
resp = acs_state_machine.handle_tr069_message(req)
self.assertTrue(
isinstance(resp, models.DummyInput),
'Provisioning completed with Dummy response',
)
def _prepare_sm():
sm = EnodebAcsStateMachineBuilder.build_acs_state_machine(
EnodebDeviceName.BAICELLS_QRTB)
sm.device_cfg.set_parameter(ParameterName.IP_SEC_ENABLE, False)
sm.device_cfg.set_parameter(ParameterName.NUM_PLMNS, 1)
return sm
def test_post_processing(self, sas_enabled, prim_src) -> None:
""" Test FreedomFi One specific post processing functionality"""
acs_state_machine = EnodebAcsStateMachineBuilder.build_acs_state_machine(
EnodebDeviceName.FREEDOMFI_ONE)
cfg_desired = Mock()
acs_state_machine.device_cfg.set_parameter(
ParameterName.SERIAL_NUMBER,
"2006CW5000023",
)
cfg_init = FreedomFiOneConfigurationInitializer(acs_state_machine)
cfg_init.postprocess(
EnodebConfigBuilder.get_mconfig(),
get_service_config(sas_enabled=sas_enabled, prim_src=prim_src),
cfg_desired,
)
expected = [
call.delete_parameter('EARFCNDL'),
call.delete_parameter('DL bandwidth'),
call.delete_parameter('UL bandwidth'),
call.set_parameter(
'tunnel_ref',
value='Device.IP.Interface.1.IPv4Address.1.',
),
call.set_parameter('prim_src', prim_src),
call.set_parameter('carrier_agg_enable', value=True),
call.set_parameter('carrier_number', value=2),
call.set_parameter('contiguous_cc', value=0),
call.set_parameter('web_ui_enable', value=False),
call.set_parameter('sas_enabled', sas_enabled),
call.set_parameter_for_object(
param_name='PLMN 1 cell reserved',
value=True,
object_name='PLMN 1',
),
]
if sas_enabled:
expected += [
call.set_parameter(
'sas_server_url',
'https://spectrum-connect.federatedwireless.com/v1.2/',
),
call.set_parameter('sas_uid', 'M0LK4T'),
call.set_parameter('sas_category', 'A'),
call.set_parameter('sas_channel_type', 'GAA'),
call.set_parameter(
'sas_cert_subject',
'/C=TW/O=Sercomm/OU=WInnForum CBSD Certificate/CN=P27-SCE4255W:%s',
),
call.set_parameter('sas_location', 'indoor'),
call.set_parameter('sas_height_type', 'AMSL'),
]
cfg_desired.assert_has_calls(expected, any_order=True)
# Check without sas config
service_cfg = {
"tr069": {
"interface": "eth1",
"port": 48080,
"perf_mgmt_port": 8081,
"public_ip": "192.88.99.142",
},
"prim_src": prim_src,
"reboot_enodeb_on_mme_disconnected": True,
"s1_interface": "eth1",
}
cfg_desired = Mock()
cfg_init.postprocess(
EnodebConfigBuilder.get_mconfig(),
service_cfg,
cfg_desired,
)
expected = [
call.delete_parameter('EARFCNDL'),
call.delete_parameter('DL bandwidth'),
call.delete_parameter('UL bandwidth'),
call.set_parameter(
'tunnel_ref',
value='Device.IP.Interface.1.IPv4Address.1.',
),
call.set_parameter('sas_enabled', False),
call.set_parameter('prim_src', prim_src),
call.set_parameter('carrier_agg_enable', value=True),
call.set_parameter('carrier_number', value=2),
call.set_parameter('contiguous_cc', value=0),
call.set_parameter('web_ui_enable', value=False),
call.set_parameter_for_object(
param_name='PLMN 1 cell reserved',
value=True,
object_name='PLMN 1',
),
]
cfg_desired.assert_has_calls(expected, any_order=True)
service_cfg['web_ui_enable_list'] = ["2006CW5000023"]
expected = [
call.delete_parameter('EARFCNDL'),
call.delete_parameter('DL bandwidth'),
call.delete_parameter('UL bandwidth'),
call.set_parameter(
'tunnel_ref',
value='Device.IP.Interface.1.IPv4Address.1.',
),
call.set_parameter('sas_enabled', False),
call.set_parameter('prim_src', prim_src),
call.set_parameter('carrier_agg_enable', value=True),
call.set_parameter('carrier_number', value=2),
call.set_parameter('contiguous_cc', value=0),
call.set_parameter('web_ui_enable', value=False),
call.set_parameter('web_ui_enable', value=True),
call.set_parameter_for_object(
param_name='PLMN 1 cell reserved',
value=True,
object_name='PLMN 1',
),
]
cfg_desired = Mock()
cfg_init.postprocess(
EnodebConfigBuilder.get_mconfig(),
service_cfg,
cfg_desired,
)
cfg_desired.assert_has_calls(expected, any_order=True)
def test_provision(self, mock_get_state) -> None:
mock_get_state.return_value = MOCK_CBSD_STATE
acs_state_machine = EnodebAcsStateMachineBuilder.build_acs_state_machine(
EnodebDeviceName.BAICELLS_QRTB)
data_model = BaicellsQRTBTrDataModel()
# Send an Inform message, wait for an InformResponse
inform_msg = Tr069MessageBuilder.get_qrtb_inform(
params=DEFAULT_INFORM_PARAMS,
oui='48BF74',
enb_serial='1202000181186TB0006',
event_codes=['2 PERIODIC'],
)
resp = acs_state_machine.handle_tr069_message(inform_msg)
self.assertTrue(
isinstance(resp, models.InformResponse),
'Should respond with an InformResponse',
)
# Send an empty http request to kick off the rest of provisioning
req = models.DummyInput()
resp = acs_state_machine.handle_tr069_message(req)
# Expect a request for transient params
self.assertTrue(
isinstance(resp, models.GetParameterValues),
'State machine should be requesting param values',
)
should_ask_for = [p.name for p in GET_TRANSIENT_PARAMS_RESPONSE_PARAMS]
self.verify_acs_asking_enb_for_params(should_ask_for, resp)
# Send back some typical values
req = Tr069MessageBuilder.param_values_qrtb_response(
GET_TRANSIENT_PARAMS_RESPONSE_PARAMS,
models.GetParameterValuesResponse,
)
# And then SM should request all parameter values from the data model
resp = acs_state_machine.handle_tr069_message(req)
self.assertTrue(
isinstance(resp, models.GetParameterValues),
'State machine should be requesting param values',
)
should_ask_for = [
data_model.get_parameter(pn, ).path
for pn in data_model.get_parameter_names()
]
self.verify_acs_asking_enb_for_params(should_ask_for, resp)
# Send back typical values
req = Tr069MessageBuilder.param_values_qrtb_response(
GET_PARAMS_RESPONSE_PARAMS,
models.GetParameterValuesResponse,
)
# SM will be requesting object parameter values
resp = acs_state_machine.handle_tr069_message(req)
self.assertTrue(
isinstance(resp, models.GetParameterValues),
'State machine should be requesting object param vals',
)
should_ask_for = [
'Device.Services.FAPService.1.CellConfig.LTE.EPC.PLMNList.1.CellReservedForOperatorUse',
'Device.Services.FAPService.1.CellConfig.LTE.EPC.PLMNList.1.Enable',
'Device.Services.FAPService.1.CellConfig.LTE.EPC.PLMNList.1.IsPrimary',
'Device.Services.FAPService.1.CellConfig.LTE.EPC.PLMNList.1.PLMNID',
]
self.verify_acs_asking_enb_for_params(should_ask_for, resp)
# Send back some typical values for object parameters
req = Tr069MessageBuilder.get_object_param_values_response(
cell_reserved_for_operator_use='true',
enable='true',
is_primary='true',
plmnid='00101',
)
resp = acs_state_machine.handle_tr069_message(req)
# All the radio responses were intentionally crafted so that they match enodebd desired config.
# Therefore the provisioning ends here. The radio goes directly into end_session -> notify_dp state
self.assertTrue(
isinstance(resp, models.DummyInput),
'State machine should send back an empty message',
)
self.assertIsInstance(
acs_state_machine.state,
BaicellsQRTBNotifyDPState,
)
