def Main(args):
DisableUnbrokeredConnections()
# Bootstrap translations until we've loaded everything else
mailpile.i18n.ActivateTranslation(None, ConfigManager, None)
try:
# Create our global config manager and the default (CLI) session
config = ConfigManager(rules=mailpile.config.defaults.CONFIG_RULES)
session = Session(config)
cli_ui = session.ui = UserInteraction(config)
session.main = True
try:
CatchUnixSignals(session)
config.clean_tempfile_dir()
config.load(session)
except IOError:
if config.sys.debug:
session.ui.error(
_('Failed to decrypt configuration, '
'please log in!'))
HealthCheck(session, None, []).run()
config.prepare_workers(session)
except AccessError, e:
session.ui.error('Access denied: %s\n' % e)
sys.exit(1)
def Main(args):
mailpile.platforms.DetectBinaries()
DisableUnbrokeredConnections()
# Bootstrap translations until we've loaded everything else
mailpile.i18n.ActivateTranslation(None, ConfigManager, None)
try:
# Create our global config manager and the default (CLI) session
config = ConfigManager(rules=mailpile.config.defaults.CONFIG_RULES)
session = Session(config)
cli_ui = session.ui = UserInteraction(config)
session.main = True
try:
CatchUnixSignals(session)
config.clean_tempfile_dir()
config.load(session)
except IOError:
if config.sys.debug:
session.ui.error(_('Failed to decrypt configuration, '
'please log in!'))
HealthCheck(session, None, []).run()
config.prepare_workers(session)
except AccessError, e:
session.ui.error('Access denied: %s\n' % e)
sys.exit(1)
def Main(args):
try:
mailpile.platforms.DetectBinaries(_raise=OSError)
except OSError as e:
binary = str(e).split()[0]
sys.stderr.write("""
Required binary missing or unusable: %s
If you know where it is, or would like to skip this test and run Mailpile
anyway, you can set one of the following environment variables:
MAILPILE_%s="/path/to/binary"
or
MAILPILE_SKIP_BINARIES="%s"
Note that skipping a binary check may cause the app to become unstable or
fail in unexpected ways. If it breaks you get to keep both pieces!
""" % (e, binary.upper(), binary))
sys.exit(1)
# Enable our connection broker, try to prevent badly behaved plugins from
# bypassing it.
DisableUnbrokeredConnections()
# Bootstrap translations until we've loaded everything else
mailpile.i18n.ActivateTranslation(None, ConfigManager, None)
try:
# Create our global config manager and the default (CLI) session
config = ConfigManager(rules=mailpile.config.defaults.CONFIG_RULES)
session = Session(config)
cli_ui = session.ui = UserInteraction(config)
session.main = True
try:
CatchUnixSignals(session)
config.clean_tempfile_dir()
config.load(session)
except IOError:
if config.sys.debug:
session.ui.error(
_('Failed to decrypt configuration, '
'please log in!'))
HealthCheck(session, None, []).run()
config.prepare_workers(session)
except AccessError, e:
session.ui.error('Access denied: %s\n' % e)
sys.exit(1)
def Main(args):
try:
mailpile.platforms.DetectBinaries(_raise=OSError)
except OSError as e:
binary = str(e).split()[0]
sys.stderr.write("""
Required binary missing or unusable: %s
If you know where it is, or would like to skip this test and run Mailpile
anyway, you can set one of the following environment variables:
MAILPILE_%s="/path/to/binary"
or
MAILPILE_IGNORE_BINARIES="%s"
Note that skipping a binary check may cause the app to become unstable or
fail in unexpected ways. If it breaks you get to keep both pieces!
""" % (e, binary.upper(), binary))
sys.exit(1)
# Enable our connection broker, try to prevent badly behaved plugins from
# bypassing it.
DisableUnbrokeredConnections()
# Bootstrap translations until we've loaded everything else
mailpile.i18n.ActivateTranslation(None, ConfigManager, None)
try:
# Create our global config manager and the default (CLI) session
config = ConfigManager(rules=mailpile.config.defaults.CONFIG_RULES)
session = Session(config)
cli_ui = session.ui = UserInteraction(config)
session.main = True
try:
CatchUnixSignals(session)
config.clean_tempfile_dir()
config.load(session)
except IOError:
if config.sys.debug:
session.ui.error(_('Failed to decrypt configuration, '
'please log in!'))
HealthCheck(session, None, []).run()
config.prepare_workers(session)
except AccessError, e:
session.ui.error('Access denied: %s\n' % e)
sys.exit(1)
def Main(args):
try:
mailpile.platforms.DetectBinaries(_raise=OSError)
except OSError as e:
binary = str(e).split()[0]
sys.stderr.write("""
Required binary missing or unusable: %s
If you know where it is, or would like to skip this test and run Mailpile
anyway, you can set one of the following environment variables:
MAILPILE_%s="/path/to/binary"
or
MAILPILE_IGNORE_BINARIES="%s"
Note that skipping a binary check may cause the app to become unstable or
fail in unexpected ways. If it breaks you get to keep both pieces!
""" % (e, binary.upper(), binary))
sys.exit(1)
# Enable our connection broker, try to prevent badly behaved plugins from
# bypassing it.
DisableUnbrokeredConnections()
# Bootstrap translations until we've loaded everything else
mailpile.i18n.ActivateTranslation(None, ConfigManager, None)
try:
# Create our global config manager and the default (CLI) session
config = ConfigManager(rules=mailpile.config.defaults.CONFIG_RULES)
session = Session(config)
cli_ui = session.ui = UserInteraction(config)
session.main = True
try:
CatchUnixSignals(session)
config.clean_tempfile_dir()
config.load(session)
except IOError:
if config.sys.debug:
session.ui.error(
_('Failed to decrypt configuration, '
'please log in!'))
HealthCheck(session, None, []).run()
config.prepare_workers(session)
except AccessError as e:
session.ui.error('Access denied: %s\n' % e)
sys.exit(1)
try:
try:
if '--login' in args:
a1 = args[:args.index('--login') + 1]
a2 = args[len(a1):]
else:
a1, a2 = args, []
allopts = []
for argset in (a1, a2):
shorta, longa = '', []
for cls in COMMANDS:
shortn, longn, urlpath, arglist = cls.SYNOPSIS[:4]
if arglist:
if shortn:
shortn += ':'
if longn:
longn += '='
if shortn:
shorta += shortn
if longn:
longa.append(longn.replace(' ', '_'))
opts, args = getopt.getopt(argset, shorta, longa)
allopts.extend(opts)
for opt, arg in opts:
session.ui.display_result(
Action(session, opt.replace('-', ''),
arg.decode('utf-8')))
if args:
session.ui.display_result(
Action(session, args[0],
' '.join(args[1:]).decode('utf-8')))
except (getopt.GetoptError, UsageError) as e:
session.fatal_error(unicode(e))
if (not allopts) and (not a1) and (not a2):
InteractCommand(session).run()
except KeyboardInterrupt:
pass
except:
traceback.print_exc()
finally:
write_readline_history(session)
# Make everything in the background quit ASAP...
mailpile.util.LAST_USER_ACTIVITY = 0
mailpile.util.QUITTING = mailpile.util.QUITTING or True
if config.plugins:
config.plugins.process_shutdown_hooks()
config.stop_workers()
if config.index:
config.index.save_changes()
if config.event_log:
config.event_log.close()
session.ui.display_result(Action(session, 'cleanup', ''))
if session.interactive and config.sys.debug:
session.ui.display_result(Action(session, 'ps', ''))
# Remove anything that we couldn't remove before
safe_remove()
# Restart the app if that's what was requested
if mailpile.util.QUITTING == 'restart':
os.execv(sys.argv[0], sys.argv)