def SCF_block(x,fs,a): ts=1.0/float(fs) l=len(x) n=num.array(range(l)) u=num.exp(-1j*num.pi*a*n*ts)*x v=num.exp(1j*num.pi*a*n*ts)*x scf,f=csd(u,v) uu,f=csd(u,u) vv,f=csd(v,v) Saf=abs(scf)/(abs(uu)*abs(vv))**.5 return max(Saf)
def SCF(z,fs,a=0): # this implementation is based on cross spectrum between u and v N=len(z) m=range(-N/2,N/2) u=num.array([z[k]*num.exp(-1j*num.pi*a*m[k]/fs) for k in range(N)]) v=num.array([z[k]*num.exp(1j*num.pi*a*m[k]/fs) for k in range(N)]) scfuv,freq=csd(v,u) scfu,freq=csd(u,u) scfv,freq=csd(v,v) scf=abs(scfuv)/((abs(scfu))*(abs(scfv)))**.5 return scf,freq
def test_csd_padding(self):
"""Test zero padding of csd()."""
if self.NFFT_density is None: # for derived classes
return
sargs = dict(x=self.y, y=self.y+1, Fs=self.Fs, window=mlab.window_none,
sides=self.sides)
spec0, _ = mlab.csd(NFFT=self.NFFT_density, **sargs)
spec1, _ = mlab.csd(NFFT=self.NFFT_density*2, **sargs)
assert_almost_equal(np.sum(np.conjugate(spec0)*spec0).real,
np.sum(np.conjugate(spec1/2)*spec1/2).real)
def tfe(y, x, source=None, *args, **kwargs):
"""estimate transfer function from x to y,
see csd for calling convention"""
if source is None:
sxy, fxy = csd(y, x, *args, **kwargs)
sxx, fxx = psd(x, *args, **kwargs)
return sxy / sxx, fxx
else:
ssx, fsx = csd(x, source, *args, **kwargs)
# sss, _ = psd(s, *args, **kwargs)
ssy, fsy = csd(y, source, *args, **kwargs)
return ssy / ssx, fsx
def preprocess(self, data):
n_channels, _ = np.shape(data)
_, _, filtered = analytic_signal(data, self.fb, self.fs)
super().prepare_pairs(n_channels)
# Store all the pair-wise auto/cross spectra.
# 2nd axis, 1st dimension is the autospectra of the 1st channel (within a pair)
# 2nd axis, 2nd dimension is the autospectra of the 2nd channel (within a pair)
# 2nd axis, 3rd dimension is the crosspectra between the two channels (within a pair)
samples = (self.csd_nfft / 2.0) + 1
csds = np.zeros((n_channels, n_channels, 3, samples))
for pair in self.pairs:
filt1, filt2 = filtered[pair, ]
csdxx, _ = mlab.csd(
filt1,
filt1,
NFFT=self.csd_nfft,
Fs=self.fs,
noverlap=self.csd_noverlap,
scale_by_freq=True,
sides="onesided",
)
csdyy, _ = mlab.csd(
filt2,
filt2,
NFFT=self.csd_nfft,
Fs=self.fs,
noverlap=self.csd_noverlap,
scale_by_freq=True,
sides="onesided",
)
csdxy, _ = mlab.csd(
filt1,
filt2,
NFFT=self.csd_nfft,
Fs=self.fs,
noverlap=self.csd_noverlap,
scale_by_freq=True,
sides="onesided",
)
r1, r2 = pair
csds[r1, r2, 0] = csdxx
csds[r1, r2, 1] = csdyy
csds[r1, r2, 2] = csdxy
return csds
def getTF(exc, resp, tmeas, Fs, Nfft, padto=None):
"""
compute transfer function along with coherence and SNR. uses PSD/CSD method with 50% overlapping windows
returns f, TF, Coherence, SNR
exc = excitation signal
resp = system response
tmeas = duration of mesurement in seconds
Fs = sample rate (Hz)
Nfft = number of data points to be used in each block for fft
padto = pad to this many points
"""
N = 1.89 * tmeas / (Nfft / Fs)
Sx, f = psd(exc, NFFT=Nfft, Fs=Fs, noverlap=int(Nfft / 2), pad_to=padto)
Sy = psd(resp, NFFT=Nfft, Fs=Fs, noverlap=int(Nfft / 2), pad_to=padto)[0]
Sxy = csd(exc,
resp,
NFFT=Nfft,
Fs=Fs,
noverlap=int(Nfft / 2),
pad_to=padto)[0]
Cxy = (Sxy * np.conj(Sxy)) / (Sx * Sy)
snr = np.sqrt(Cxy * 2 * N / (1 - Cxy))
return f, Sxy / Sx, Cxy, snr
def get_cross_spectra(self, x, y):
'''
Compute cross-spectra between x and y using the method implemented in
matplotlib.mlab.csd
Arguments
---------
*x*, *y* : np.ndarray
signals, shape (n_x/n_y, T), n_x/n_y is number of signals,
T the number of samples
Returns
-------
*C_xy* : np.ndarray
complex array if shape (n_x, n_y, NFFT) containing the cross-spectra
'''
n_x = x.shape[0]
n_y = y.shape[0]
#try:
# assert(n_x >= n_y)
#except AssertionError as ae:
# raise ae, 'n_x = {} < n_y = {}'.format(n_x, n_y)
#compute cross-spectra
C_xy = np.empty((n_x, n_y, self.NFFT), dtype=complex)
for i in range(n_x):
for j in range(n_y):
G, f = csd(x[i, ], y[j, ], NFFT=self.NFFT, Fs=self.Fs,
noverlap=self.noverlap,
sides='twosided')
C_xy[i, j, ] = G
return C_xy
def cp(tr1, tr2, lenfft, lenol, delta):
# Cross-power function
sr = 1./float(delta)
cpval,fre = csd(tr1.data, tr2.data, NFFT=lenfft, Fs=sr, noverlap=int(lenol*lenfft), scale_by_freq=True)
fre = fre[1:]
cpval = cpval[1:]
return cpval, fre
def csd(self, plot=True, nbandavg=1, **kwargs):
"""
Cross spectral density
nbandavg = Number of fft bins to average
"""
if self.isequal == False and self.VERBOSE:
print(
'Warning - time series is unequally spaced consider using lomb-scargle fft'
)
NFFT = int(2**(np.floor(np.log2(
self.ny / nbandavg)))) # Nearest power of 2 to length of data
Pyy, frq = mlab.csd(self.TSobs.y - self.TSobs.y.mean(),
Fs=2 * np.pi / self.dt,
NFFT=NFFT,
window=mlab.window_hanning,
scale_by_freq=True)
if plot:
plt.loglog(frq, Pyy, **kwargs)
plt.xlabel('Freq. [$cycles s^{-1}$]')
plt.ylabel('PSD')
plt.grid(b=1)
return Pyy, frq
def cohere_transfere_MI (convolved_train, wNoise, nFFT, FS):
"""
Function computes coherence, mutual information from coherence, transfer function and cross-power-spectra density
and power spectra density. Function computes the same for whole signal and only for the steady state portion (_short)
:param metas: meta data
:param convolved_train: convolved spike train
:param wNoise: white noise
:param nFFT: FFT
:param FS: sample rate
:return coh: computed coherence
:return coh_short:
:return freq:
:return MI:
:return MI_short:
:return P_csd:
:return P_csd_short:
:return P_psd:
:return P_csd_short:
"""
# conversions w. clipping first 2 seconds
wNoiseShort = wNoise[2*FS:]
conv_train_short = convolved_train[2*FS:]
# compute coherence
coh, freq = mlab.cohere(wNoise-np.mean(wNoise), convolved_train-np.mean(convolved_train), NFFT=nFFT, Fs=FS)
coh_short, _ = mlab.cohere(wNoiseShort-np.mean(wNoiseShort), conv_train_short-np.mean(conv_train_short), NFFT=nFFT, Fs=FS)
# calculate the mutual information
MI = (-np.log(1-coh))/np.log(2)
MI_short = (-np.log(1-coh_short))/np.log(2)
# compute csd
P_csd, _ = mlab.csd(wNoise, convolved_train, NFFT=nFFT, Fs=FS)
P_csd_short, _ = mlab.csd(wNoiseShort, conv_train_short, NFFT=nFFT, Fs=FS)
if np.any(np.absolute(P_csd_short) < 0):
print("negative CSD")
# compute psd
P_psd,_ = mlab.psd(wNoise,NFFT=nFFT, Fs=FS)
P_psd_short,_ = mlab.psd(wNoiseShort,NFFT=nFFT, Fs=FS)
# compute the transfer function
H = np.absolute(P_csd)/P_psd
H_short = np.absolute(P_csd_short)/P_psd_short
return freq, coh, coh_short, H, H_short, MI, MI_short, P_csd, P_csd_short, P_psd, P_psd_short
def preprocess(self, data):
n_channels, n_samples = np.shape(data)
filtered, _, _ = analytic_signal(data, self.fb, self.fs)
if self.pairs is None:
self.pairs = [(r1, r2) for r1 in range(n_channels)
for r2 in range(n_channels)]
# Store all the pair-wise auto/cross spectra.
# 2nd axis, 1st dimension is the autospectra of the 1st channel (within a pair)
# 2nd axis, 2nd dimension is the autospectra of the 2nd channel (within a pair)
# 2nd axis, 3rd dimension is the crosspectra between the two channels (within a pair)
samples = (self.csd_nfft / 2.0) + 1
csds = np.zeros((n_channels, n_channels, 3, samples))
for pair in self.pairs:
filt1, filt2 = filtered[pair, ]
csdxx, _ = mlab.csd(filt1,
filt1,
NFFT=self.csd_nfft,
Fs=self.fs,
noverlap=self.csd_noverlap,
scale_by_freq=True,
sides='onesided')
csdyy, _ = mlab.csd(filt2,
filt2,
NFFT=self.csd_nfft,
Fs=self.fs,
noverlap=self.csd_noverlap,
scale_by_freq=True,
sides='onesided')
csdxy, _ = mlab.csd(filt1,
filt2,
NFFT=self.csd_nfft,
Fs=self.fs,
noverlap=self.csd_noverlap,
scale_by_freq=True,
sides='onesided')
r1, r2 = pair
csds[r1, r2, 0, ] = csdxx
csds[r1, r2, 1, ] = csdyy
csds[r1, r2, 2, ] = csdxy
return csds
def binned_pair2cxy(binned0,
binned1,
Fs=1000.,
NFFT=256,
noverlap=None,
windw=mlab.window_hanning,
detrend=mlab.detrend_mean,
freq_high=100,
average_over_trials=True):
"""Given 2d array of binned times, return Cxy
Helper function to ensure faking goes smoothly
binned: 2d array, trials on rows, timepoints on cols
Keep trials lined up!
rest : psd_kwargs. noverlap defaults to NFFT/2
Trial averaging, if any, is done between calculating the spectra and
normalizing them.
Will Cxy each trial with psd_kwargs, then mean over trials, then slice out
frequencies below freq_high and return.
"""
# Set up psd_kwargs
if noverlap is None:
noverlap = NFFT / 2
psd_kwargs = {
'Fs': Fs,
'NFFT': NFFT,
'noverlap': noverlap,
'detrend': detrend,
'window': windw
}
# Cxy each trial
ppxx_l, ppyy_l, ppxy_l = [], [], []
for row0, row1 in zip(binned0, binned1):
ppxx, freqs = mlab.psd(row0, **psd_kwargs)
ppyy, freqs = mlab.psd(row1, **psd_kwargs)
ppxy, freqs = mlab.csd(row0, row1, **psd_kwargs)
ppxx_l.append(ppxx)
ppyy_l.append(ppyy)
ppxy_l.append(ppxy)
# Optionally mean over trials, then normalize
S12 = np.real_if_close(np.array(ppxy_l))
S1 = np.array(ppxx_l)
S2 = np.array(ppyy_l)
if average_over_trials:
S12 = S12.mean(0)
S1 = S1.mean(0)
S2 = S2.mean(0)
Cxy = S12 / np.sqrt(S1 * S2)
# Truncate unnecessary frequencies
if freq_high:
topbin = np.where(freqs > freq_high)[0][0]
freqs = freqs.T[1:topbin].T
Cxy = Cxy.T[1:topbin].T
return Cxy, freqs
def cp(tr1, tr2):
cpval, fre = csd(tr1.data,
tr2.data,
NFFT=length,
Fs=tr1.stats.sampling_rate,
noverlap=overlap,
scale_by_freq=True)
return cpval[1:], fre[1:]
def DifResMlabCsd(data1, data2, fs):
P1, f1 = mlab.csd(data1,
data2,
len(data1),
Fs=fs,
window=mlab.window_hanning)
P2, f2 = mlab.csd(data1,
data2,
len(data1) / 10,
Fs=fs,
window=mlab.window_hanning)
P3, f3 = mlab.csd(data1,
data2,
len(data1) / 100,
Fs=fs,
window=mlab.window_hanning)
return f1, P1, f2, P2, f3, P3
def espec2(x,y,nfft,fs): """ # ================================================================================== # # # Calcula o espectro cruzado entre duas series reais # # Dados de entrada: x = serie real 1 (potencia de 2) # y = serie real 2 (potencia de 2) # nfft - Numero de pontos utilizado para o calculo da FFT # fs - frequencia de amostragem # # Dados de saida: [aa2] - col 0: vetor de frequencia # col 1: amplitude do espectro cruzado # col 2: co-espectro # col 3: quad-espectro # col 4: espectro de fase # col 5: espectro de coerencia # col 6: intervalo de confianca inferior do espectro cruzado # col 7: intervalo de confianca superior do espectro cruzado # col 8: intervalo de confianca da coerencia # # Infos: detrend - mean # window - hanning # noverlap - 50% # # ================================================================================== # """ #cross-spectral density - welch method (complex valued) sp = mlab.csd(x,y,NFFT=nfft,Fs=fs,detrend=mlab.detrend_mean,window=mlab.window_hanning,noverlap=nfft/2) f = sp[1][1:] sp2 = sp[0][1:] #co e quad espectro (real e imag) - verificar com parente co = np.real(sp2) qd = np.imag(sp2) #phase (angle function) ph = np.angle(sp2,deg=True) #ecoherence between x and y (0-1) coer = mlab.cohere(x,y,NFFT=nfft,Fs=fs,detrend=mlab.detrend_mean,window=mlab.window_hanning,noverlap=nfft/2) coer = coer[0][1:] #intervalo de confianca para a amplitude do espectro cruzado - 95% ici = sp2 * 14 /26.12 ics = sp2 * 14 /5.63 #intervalo de confianca para coerencia icc = np.zeros(len(sp2)) icc[:] = 1 - (0.05 ** (1 / (14 / 2.0 - 1))) aa2 = np.array([f,sp2,co,qd,ph,coer,ici,ics,icc]).T return aa2
def auto_auto_cross(a, b, sample_rate, NFFT=None, detrend=mlab.detrend_none, window=mlab.window_none, noverlap=None,
binned=True, bins_per_decade=30, **kwds):
"""
Return estimates of the auto-spectral density of both real time series a and b, of their cross-spectral density, and
the frequencies corresponding to these estimates.
Parameters
----------
a : ndarray(real)
A real time series.
b : ndarray(real)
A real time series.
sample_rate : float
The sample rate of both time series.
NFFT : int
The number of samples to use for each FFT chunk; should be a power of two for speed; if None, a reasonable
default is used.
window : callable
A function that takes a complex time series as argument and returns a windowed time series.
noverlap : int
The number of samples to overlap in each chunk; if None, a value equal to half the NFFT value is used.
detrend : callable
A function that takes a complex time series as argument and returns a detrended time series.
binned : bool
If True, the result is binned using bin sizes that increase with frequency, and the bins at zero frequency and
the Nyquist frequency are dropped.
bins_per_decade : int
The number of bins per decade; used only if binned is True.
kwds : dict
Additional keywords to pass to mlab.psd and mlab.csd.
Returns
-------
f : ndarray(float)
The frequencies corresponding to the data.
S_aa : ndarray(float)
The spectral density of a.
S_bb : ndarray(float)
The spectral density of b.
S_ab : ndarray(complex)
The cross-spectral density of a and b.
"""
if NFFT is None:
NFFT = int(2 ** (np.floor(np.log2(a.size)) - 3))
if noverlap is None:
noverlap = NFFT // 2
S_aa, f = mlab.psd(a, Fs=sample_rate, NFFT=NFFT, detrend=detrend, window=window, noverlap=noverlap, **kwds)
S_bb, f = mlab.psd(b, Fs=sample_rate, NFFT=NFFT, detrend=detrend, window=window, noverlap=noverlap, **kwds)
S_ab, f = mlab.csd(a, b, Fs=sample_rate, NFFT=NFFT, window=window, detrend=detrend, noverlap=noverlap, **kwds)
if binned:
f = f[1:-1]
S_aa = S_aa[1:-1]
S_bb = S_bb[1:-1]
S_ab = S_ab[1:-1]
edges, counts, f, (S_aa, S_bb, S_ab) = binning.log_bin(f, bins_per_decade, S_aa, S_bb, S_ab)
return AutoAutoCross(f, S_aa, S_bb, S_ab)
def crossCalib(monitor_trace, response_trace, **kwargs):
m_trace=monitor_trace.copy()
r_trace=response_trace.copy()
if 'demean' in kwargs and kwargs['demean']:
m_trace.detrend('demean')
r_trace.detrend('demean')
if 'taper' in kwargs and kwargs['taper']:
m_trace.taper(0.05)
r_trace.taper(0.05)
#Paramètres des PSD
if 'nfft' in kwargs:
n_fft=kwargs['nfft']
else:
n_fft=1024
if 'npad' in kwargs:
n_pad=kwargs['npad']
else:
n_pad=n_fft*4
if 'noverlap' in kwargs:
n_overlap=kwargs['noverlap']
else:
n_overlap=int(n_fft*0.90)
#paz par défaut: chaine générique
if 'paz' in kwargs:
paz=kwargs['paz']
else:
paz=dict()
paz['zeros']=np.array([])
paz['poles']=np.array([])
paz['gain']=1
paz['seismometer_gain']=1
paz['datalogger_gain']=1
paz['sensitivity']=paz['seismometer_gain']*paz['datalogger_gain']*paz['gain']
fs=m_trace.stats.sampling_rate
(P00,f)=mlab.psd(m_trace.data,Fs=fs,NFFT=n_fft,noverlap=n_overlap,pad_to=n_pad,detrend=mlab.detrend_mean,window=mlab.window_hanning)
(P01,f)=mlab.csd(m_trace.data,r_trace.data,Fs=fs,NFFT=n_fft,noverlap=n_overlap,pad_to=n_pad,detrend=mlab.detrend_mean,window=mlab.window_hanning)
(C,f)=mlab.cohere(m_trace.data,r_trace.data,Fs=fs,NFFT=n_fft,noverlap=n_overlap,pad_to=n_pad,detrend=mlab.detrend_mean,window=mlab.window_hanning)
(b,a)=sp.zpk2tf(paz['zeros'],paz['poles'],paz['sensitivity'])
(_w,H0)=sp.freqs(b,a,f*2*np.pi)
H1=P01*H0/P00
H1=H1[1:]
C=C[1:]
f=f[1:]
return (H1,C,f)
def test_csd(self):
freqs = self.freqs_density
spec, fsp = mlab.csd(x=self.y, y=self.y+1,
NFFT=self.NFFT_density,
Fs=self.Fs,
noverlap=self.nover_density,
pad_to=self.pad_to_density,
sides=self.sides)
assert_allclose(fsp, freqs, atol=1e-06)
assert spec.shape == freqs.shape
def cp(tr1, tr2, lenfft, lenol, delta):
sr = 1 / delta
cpval, fre = csd(tr1.data,
tr2.data,
NFFT=lenfft,
Fs=sr,
noverlap=lenol,
scale_by_freq=True)
fre = fre[1:]
cpval = cpval[1:]
return cpval, fre
def espec2(x, y, nfft, fs):
"""
Calcula o espectro cruzado entre duas series reais
Dados de entrada: x = serie real 1 (potencia de 2)
y = serie real 2 (potencia de 2)
nfft - Numero de pontos utilizado para o calculo da FFT
fs - frequencia de amostragem
Dados de saida: [aa2] - col 0: vetor de frequencia
col 1: amplitude do espectro cruzado
col 2: co-espectro
col 3: quad-espectro
col 4: espectro de fase
col 5: espectro de coerencia
col 6: intervalo de confianca inferior do espectro cruzado
col 7: intervalo de confianca superior do espectro cruzado
col 8: intervalo de confianca da coerencia
Infos: detrend - mean
window - hanning
noverlap - 50%
"""
#cross-spectral density - welch method (complex valued)
s, f = mlab.csd(x, y, NFFT=nfft, Fs=fs, detrend=mlab.detrend_mean, window=mlab.window_hanning, noverlap=nfft/2)
# graus de liberdade
dof = len(x) / nfft * 2
#co e quad espectro (real e imag) - verificar com parente
co = np.real(s)
qd = np.imag(s)
#phase (angle function)
ph = np.angle(s, deg=True)
#ecoherence between x and y (0-1)
coer = mlab.cohere(x, y, NFFT=nfft, Fs=fs, detrend=mlab.detrend_mean, window=mlab.window_hanning, noverlap=nfft/2)[0]
# coer = coer[0][1:]
#intervalo de confianca para a amplitude do espectro cruzado - 95%
ici = s * dof /26.12
ics = s * dof /5.63
#intervalo de confianca para coerencia
icc = np.zeros(len(s))
icc[:] = 1 - (0.05 ** (1 / (14 / 2.0 - 1)))
# matriz de saida
aa = np.array([f, s ,co, qd, ph, coer, ici, ics, icc]).T
return aa
def test_full_spectral_helper():
x = np.random.randn(2 ** 20)
y = np.random.randn(2 ** 20)
mlabPxx, fr = mlab.psd(x, NFFT=2 ** 16, Fs=512e6 / 2 ** 14)
mlabPyy, fr = mlab.psd(y, NFFT=2 ** 16, Fs=512e6 / 2 ** 14)
mlabPxy, fr = mlab.csd(x, y, NFFT=2 ** 16, Fs=512e6 / 2 ** 14)
with warnings.catch_warnings():
warnings.simplefilter('ignore', np.ComplexWarning)
fullPxx, fullPyy, fullPxy, freqs, t = full_spectral_helper(x, y, NFFT=2 ** 16, Fs=512e6 / 2 ** 14)
assert (np.allclose(mlabPxx, fullPxx.mean(1)))
assert (np.allclose(mlabPyy, fullPyy.mean(1)))
assert (np.allclose(mlabPxy, fullPxy.mean(1)))
def calc_spectra(x, y, sr, nfft = None):
# expects two 1d arrays as signals and a number for the sampling rate
# (optional) parameters for FFT
# returns PSD(x,x), PSD(y,y), PSD(x,y), PSD(y,x) and frequency
if nfft is None:
nfft = 2 ** 11
params = {'NFFT': nfft, 'noverlap': nfft / 2}
if not isinstance(params, dict):
print('ERROR: params in calc_spectra() is not a dictionary.')
x = x - mean(x)
y = y - mean(y)
Pxx, _ = ml.psd(x, Fs=sr, **params)
Pyy, _ = ml.psd(y, Fs=sr, **params)
Pxy, _ = ml.csd(x, y, Fs=sr, **params)
Pyx, _ = ml.csd(y, x, Fs=sr, **params)
ml_coherence, f = ml.cohere(x, y, Fs=sr, **params)
return Pxx, Pyy, Pxy, Pyx, ml_coherence, f
def est_s(s, r, nfft=2**12):
'''
Q_rs = numpy.correlate(r_est, s,'full')
Q_rr = numpy.correlate(r_est, r_est,'full')
Qf_rs = numpy.fft.fftpack.rfft(Q_rs,nfft)
Qf_rr = numpy.fft.fftpack.rfft(Q_rr,nfft)
'''
Qf_rs = mlab.csd(r, s, nfft)
Qf_rr = mlab.csd(r, r, nfft)
Txy = Qf_rs[0] / Qf_rr[0]
T = numpy.array(Txy.tolist() + Txy[::-1].conj()[1:-1].tolist())
k = numpy.fft.fftshift(numpy.fft.ifft(T).real)
'''
s_est = fftfilt(k,r)
s_est = s_est[nfft/2:]
'''
s_est = numpy.convolve(r, k, 'full')
s_est = s_est[nfft / 2:-nfft / 2 + 1]
return s_est, Txy, T, k
def getspectra(string):
try:
#if True:
debug = True
lenfft = 20000
resppath = '/APPS/metadata/RESPS/'
stringTEMP = string.split('_')
net = stringTEMP[0]
sta = stringTEMP[1]
loc = stringTEMP[2]
chan = stringTEMP[3]
year = stringTEMP[4]
jday = stringTEMP[5]
if debug:
print 'Working on: ' + net + ' ' + sta + ' ' + loc + ' ' + chan
stime = UTCDateTime(year + '-' + jday + "T00:00:00")
st = client.timeseries(net, sta, loc, chan, stime, stime + 24*60*60)
if debug:
print(st)
if len(st) == 1:
power,freq = csd(st[0].data,st[0].data, NFFT = lenfft,
noverlap = int(lenfft*.5), Fs = 1/st[0].stats.delta,
scale_by_freq = True)
power = power[1:].real
freq = freq[1:]
resp = evalresp(t_samp = st[0].stats.delta, nfft = lenfft, filename= resppath + 'RESP.' + net + '.' + \
sta + '.' + loc + '.' + chan, date = st[0].stats.starttime, station = sta,
channel = chan, network = net, locid = loc, units = 'ACC')
resp = resp[1:]
power = 10.*np.log10(power/np.absolute(resp*np.conjugate(resp)))
else:
power =[]
freq=[]
if len(power) > 1:
if debug:
print 'Writing data for: ' + string
if not os.path.exists('/TEST_ARCHIVE/PSDS/' + sta):
os.makedirs('/TEST_ARCHIVE/PSDS/' + sta)
if not os.path.exists('/TEST_ARCHIVE/PSDS/' + sta + '/' + year):
os.makedirs('/TEST_ARCHIVE/PSDS/' + sta + '/' + year)
fpsd = open('/TEST_ARCHIVE/PSDS/' + sta + '/' + year + '/PSD_' + string,'w')
for p,f in zip(power,freq):
fpsd.write(str(p) + ', ' + str(f) + '\n')
fpsd.close()
except:
print 'Unable to process: ' + string
return
def estimate_pair(self, ts1, ts2):
csdxx, _ = mlab.csd(x=ts1,
y=ts1,
Fs=self.fs,
scale_by_freq=True,
sides="onesided",
**self.csdargs)
csdyy, _ = mlab.csd(x=ts2,
y=ts2,
Fs=self.fs,
scale_by_freq=True,
sides="onesided",
**self.csdargs)
csdxy, _ = mlab.csd(x=ts1,
y=ts2,
Fs=self.fs,
scale_by_freq=True,
sides="onesided",
**self.csdargs)
cohv = np.abs(csdxy * np.conj(csdxy)) / (csdxx * csdyy)
return np.sum(cohv) / len(cohv)
def test_psd_csd_equal(self):
Pxx, freqsxx = mlab.psd(x=self.y,
NFFT=self.NFFT_density,
Fs=self.Fs,
noverlap=self.nover_density,
pad_to=self.pad_to_density,
sides=self.sides)
Pxy, freqsxy = mlab.csd(x=self.y, y=self.y,
NFFT=self.NFFT_density,
Fs=self.Fs,
noverlap=self.nover_density,
pad_to=self.pad_to_density,
sides=self.sides)
assert_array_almost_equal_nulp(Pxx, Pxy)
assert_array_equal(freqsxx, freqsxy)
def _spectral_density(x, y, Fs, Nf, Nens,
Npts_per_real, Npts_overlap, Npts_per_ens,
detrend, window,
print_status=False, status_label=''):
'Get spectral density of provided signals.'
same_data = x is y
# Initialize spectral density array
if not same_data:
# Cross-spectral density is intrinsically complex-valued, so
# we must initialize the spectral density as a complex-valued
# array to avoid loss of information
Gxy = np.zeros([Nf, Nens], dtype=np.complex128)
else:
# Autospectral density is intrinsically real-valued
# (assuming `x` is real-valued), so we don't need the
# overhead of a complex-valued array
Gxy = np.zeros([Nf, Nens])
if print_status:
print ''
# Loop over successive ensembles
for ens in np.arange(Nens):
# Create a slice corresponding to current ensemble
ens_start = ens * Npts_per_ens
ens_stop = (ens + 1) * Npts_per_ens
sl = slice(ens_start, ens_stop)
if same_data:
Gxy[:, ens] = mlab.psd(
x[sl], Fs=Fs,
NFFT=Npts_per_real, noverlap=Npts_overlap,
detrend=detrend, window=window)[0]
else:
Gxy[:, ens] = mlab.csd(
x[sl], y[sl], Fs=Fs,
NFFT=Npts_per_real, noverlap=Npts_overlap,
detrend=detrend, window=window)[0]
if print_status:
print ('%s percent complete: %.1f \r'
% (status_label, (100 * np.float(ens + 1) / Nens))),
if print_status:
print ''
return Gxy
def get_coherence_phase(s1, s2, sampling=5000):
""" Gets the phase angle of the coherence between two signals
Input:
s1,s2: two time series
sampling: the sampling of the signal [def: 5000]
Output:
Psi: phase in radians
f: frequencies
"""
from matplotlib.mlab import csd
from numpy import angle
Pxy, freqs = csd(s1, s2, NFFT=256, Fs=sampling)
return angle(Pxy), freqs
def test_full_spectral_helper():
x = np.random.randn(2**20)
y = np.random.randn(2**20)
mlabPxx, fr = mlab.psd(x, NFFT=2**16, Fs=512e6 / 2**14)
mlabPyy, fr = mlab.psd(y, NFFT=2**16, Fs=512e6 / 2**14)
mlabPxy, fr = mlab.csd(x, y, NFFT=2**16, Fs=512e6 / 2**14)
with warnings.catch_warnings():
warnings.simplefilter('ignore', np.ComplexWarning)
fullPxx, fullPyy, fullPxy, freqs, t = full_spectral_helper(x,
y,
NFFT=2**16,
Fs=512e6 /
2**14)
assert (np.allclose(mlabPxx, fullPxx.mean(1)))
assert (np.allclose(mlabPyy, fullPyy.mean(1)))
assert (np.allclose(mlabPxy, fullPxy.mean(1)))
def get_coherence_phase(s1,s2,sampling=5000):
""" Gets the phase angle of the coherence between two signals
Input:
s1,s2: two time series
sampling: the sampling of the signal [def: 5000]
Output:
Psi: phase in radians
f: frequencies
"""
from matplotlib.mlab import csd
from numpy import angle
Pxy, freqs = csd( s1,s2, NFFT = 256, Fs = sampling )
return angle( Pxy ), freqs
def xps(s1,s2, Fs,minfreq=None):
"""
like nps, but for cross spectra: returns two vectors, frequencies and PSD
PSD is in units^s/Hz
"""
if minfreq != None:
nfft=np.min([len(s1),np.int(2.*Fs/minfreq)])
nfft=2**(np.int(np.log2(nfft)))
elif minfreq == None:
nfft=len(s1)
nfft=2**(np.int(np.log2(nfft)))
Pxx, freqs = mlab.csd(s1,s2, NFFT=nfft, Fs = Fs)
#we hate zero frequency
freqs=freqs[1:]
Pxx=Pxx[1:]
return freqs, Pxx
def xps(s1, s2, Fs, minfreq=None):
"""
like nps, but for cross spectra: returns two vectors, frequencies and PSD
PSD is in units^s/Hz
"""
if minfreq != None:
nfft = np.min([len(s1), np.int(2. * Fs / minfreq)])
nfft = 2**(np.int(np.log2(nfft)))
elif minfreq == None:
nfft = len(s1)
nfft = 2**(np.int(np.log2(nfft)))
Pxx, freqs = mlab.csd(s1, s2, NFFT=nfft, Fs=Fs)
#we hate zero frequency
freqs = freqs[1:]
Pxx = Pxx[1:]
return freqs, Pxx
def binned_pair2cxy(binned0, binned1, Fs=1000., NFFT=256, noverlap=None,
windw=mlab.window_hanning, detrend=mlab.detrend_mean, freq_high=100,
average_over_trials=True):
"""Given 2d array of binned times, return Cxy
Helper function to ensure faking goes smoothly
binned: 2d array, trials on rows, timepoints on cols
Keep trials lined up!
rest : psd_kwargs. noverlap defaults to NFFT/2
Trial averaging, if any, is done between calculating the spectra and
normalizing them.
Will Cxy each trial with psd_kwargs, then mean over trials, then slice out
frequencies below freq_high and return.
"""
# Set up psd_kwargs
if noverlap is None:
noverlap = NFFT / 2
psd_kwargs = {'Fs': Fs, 'NFFT': NFFT, 'noverlap': noverlap,
'detrend': detrend, 'window': windw}
# Cxy each trial
ppxx_l, ppyy_l, ppxy_l = [], [], []
for row0, row1 in zip(binned0, binned1):
ppxx, freqs = mlab.psd(row0, **psd_kwargs)
ppyy, freqs = mlab.psd(row1, **psd_kwargs)
ppxy, freqs = mlab.csd(row0, row1, **psd_kwargs)
ppxx_l.append(ppxx); ppyy_l.append(ppyy); ppxy_l.append(ppxy)
# Optionally mean over trials, then normalize
S12 = np.real_if_close(np.array(ppxy_l))
S1 = np.array(ppxx_l)
S2 = np.array(ppyy_l)
if average_over_trials:
S12 = S12.mean(0)
S1 = S1.mean(0)
S2 = S2.mean(0)
Cxy = S12 / np.sqrt(S1 * S2)
# Truncate unnecessary frequencies
if freq_high:
topbin = np.where(freqs > freq_high)[0][0]
freqs = freqs.T[1:topbin].T
Cxy = Cxy.T[1:topbin].T
return Cxy, freqs
def estimate_decoder(time, s, r, dt, nfft=2**12):
'''
Estimates the decoding kernel K and reconstructs the original stimuls
Inputs: time: time vector
s: stimulus
r: response
dt: sampling period
nfft: number of datapoints to be used for spectral estimation (window length)
Outputs: k: the decoding kernel (length of the nfft)
k_time: the time vector of the decoding kernel (length of the nfft)
s_est: the estimated stimulus (length of s and r minus a window length)
s_est_time: time vector for s_est
NOTE: we discard data points 0:nfft/2 and -nnft2:end due to boundary effects
'''
Fs = 1 / dt # sampling frequency
# compute the cross spectrum between response and stimulus
Qf_rs, freqs = mlab.csd(r, s, nfft, Fs=Fs)
Qf_rs *= dt
# computes the response power spectrum
Qf_rr, freqs = mlab.psd(r, nfft, Fs=Fs)
Qf_rr *= dt
# take the ratio
Kf = Qf_rs / Qf_rr
# we need to add negative frequency with (conjugate values) to comply to the input
# requirements of the ifft function
Kf = np.hstack([Kf, Kf[::-1].conj()[1:-1]])
k = np.fft.fftshift(np.fft.ifft(Kf).real) / dt
k_time = (np.arange(nfft) - int(nfft / 2)) * dt
# compute estimated stimulus
s_est = np.convolve(r, k, 'same') * dt
# crop s_est and time vector appropriately
s_est = s_est[int(nfft / 2):int(-nfft / 2)]
s_est_time = time[int(nfft / 2):int(-nfft / 2)] - dt
return k, k_time, s_est, s_est_time
def pca_noise_with_errors(d, NFFT, Fs, window=mlab.window_hanning, detrend=mlab.detrend_mean,
use_log_bins=True):
# Assume the rotation is small so that the variance can be approximated using the values in the pre-PCA spectra.
# Take the variance to be the square of the power in each bin, divided by the number of averaged spectra.
n_averaged = d.size / NFFT
pii, pf = mlab.psd(d.real, NFFT=NFFT, Fs=Fs, window=window, detrend=detrend)
pqq, pf = mlab.psd(d.imag, NFFT=NFFT, Fs=Fs, window=window, detrend=detrend)
piq, pf = mlab.csd(d.real, d.imag, NFFT=NFFT, Fs=Fs, window=window, detrend=detrend)
if use_log_bins:
bf, bc_ii, (bp_ii, bvar_ii) = binning.log_bin_with_variance(pf, pii, pii ** 2 / n_averaged)
bf, bc_qq, (bp_qq, bvar_qq) = binning.log_bin_with_variance(pf, pqq, pqq ** 2 / n_averaged)
bf, bc_iq, (bp_iq, bvar_iq) = binning.log_bin_with_variance(pf, piq, np.abs(piq) ** 2 / n_averaged) # probably not right
S, evals, evects, angles = calculate_pca_noise(bp_ii, bp_qq, bp_iq)
return bf, S, evals, evects, angles, (bp_ii, bp_qq, bp_iq), bc_ii, np.vstack((bvar_qq, bvar_ii))
else:
S, evals, evects, angles = calculate_pca_noise(pii, pqq, piq)
return (pf, S, evals, evects, angles, (pii, piq, piq), np.ones_like(pf),
np.vstack((pqq**2 / n_averaged, pii**2 / n_averaged)))
def compute_mean_psd_csd(x, y, n_epochs, nfft, sfreq):
'''Computes mean of PSD and CSD for signals.'''
x2 = np.array_split(x, n_epochs)
y2 = np.array_split(y, n_epochs)
Rxy = np.zeros((n_epochs, n_freqs), dtype=np.complex)
Rxx = np.zeros((n_epochs, n_freqs), dtype=np.complex)
Ryy = np.zeros((n_epochs, n_freqs), dtype=np.complex)
for i in range(n_epochs):
Rxy[i], freqs = mlab.csd(x2[i], y2[i], NFFT=nfft, Fs=sfreq)
Rxx[i], _ = mlab.psd(x2[i], NFFT=nfft, Fs=sfreq)
Ryy[i], _ = mlab.psd(y2[i], NFFT=nfft, Fs=sfreq)
Rxy_mean = np.mean(Rxy, axis=0)
Rxx_mean = np.mean(Rxx, axis=0)
Ryy_mean = np.mean(Ryy, axis=0)
return freqs, Rxy, Rxy_mean, np.real(Rxx_mean), np.real(Ryy_mean)
def compute_mean_psd_csd(x, y, n_epochs, nfft, sfreq):
'''Computes mean of PSD and CSD for signals.'''
x2 = np.array_split(x, n_epochs)
y2 = np.array_split(y, n_epochs)
Rxy = np.zeros((n_epochs, n_freqs), dtype=np.complex)
Rxx = np.zeros((n_epochs, n_freqs), dtype=np.complex)
Ryy = np.zeros((n_epochs, n_freqs), dtype=np.complex)
for i in range(n_epochs):
Rxy[i], freqs = mlab.csd(x2[i], y2[i], NFFT=nfft, Fs=sfreq)
Rxx[i], _ = mlab.psd(x2[i], NFFT=nfft, Fs=sfreq)
Ryy[i], _ = mlab.psd(y2[i], NFFT=nfft, Fs=sfreq)
Rxy_mean = np.mean(Rxy, axis=0)
Rxx_mean = np.mean(Rxx, axis=0)
Ryy_mean = np.mean(Ryy, axis=0)
return freqs, Rxy, Rxy_mean, np.real(Rxx_mean), np.real(Ryy_mean)
def calculate(self, NFFT=2**16, thresh=0.95):
self.pxx1, self.freq = mlab.psd(self.corrected_timeseries1.real,
NFFT=NFFT,
Fs=self.timeseries_sample_rate)
self.pii1, self.freq = mlab.psd(self.corrected_timeseries1.imag,
NFFT=NFFT,
Fs=self.timeseries_sample_rate)
self.pxx2, self.freq = mlab.psd(self.corrected_timeseries2.real,
NFFT=NFFT,
Fs=self.timeseries_sample_rate)
self.pii2, self.freq = mlab.psd(self.corrected_timeseries2.imag,
NFFT=NFFT,
Fs=self.timeseries_sample_rate)
self.coherence, self.coh_freq = mlab.cohere(
self.corrected_timeseries1.real,
self.corrected_timeseries2.real,
NFFT=NFFT,
Fs=self.timeseries_sample_rate)
#print self.coherence.mean()
self.effective_dof = self.coherence.mean() * len(
self.corrected_timeseries1) / (NFFT / 2.)
self.effective_dof = 0.25 * (len(self.corrected_timeseries1) /
(NFFT / 2.))
self.gamma95 = 1 - (1 - thresh)**(1. / (self.effective_dof - 1.))
self.mask95 = self.coherence > self.gamma95
self.csd, self.csd_freq = mlab.csd(self.corrected_timeseries1.real,
self.corrected_timeseries2.real,
NFFT=NFFT,
Fs=self.timeseries_sample_rate)
self.angle = np.angle(self.csd)
self.lpts1 = filters.low_pass_fir(
self.corrected_timeseries1.real,
cutoff=100.0,
nyquist_freq=self.timeseries_sample_rate)
self.lpts2 = filters.low_pass_fir(
self.corrected_timeseries2.real,
cutoff=100.0,
nyquist_freq=self.timeseries_sample_rate)
def pca_noise(d,
NFFT=None,
Fs=256e6 / 2.**11,
window=mlab.window_hanning,
detrend=mlab.detrend_mean,
use_log_bins=True,
use_full_spectral_helper=True):
if NFFT is None:
NFFT = int(2**(np.floor(np.log2(d.shape[0])) - 3))
#print "using NFFT: 2**", np.log2(NFFT)
if use_full_spectral_helper:
pii, pqq, piq, fr_orig, t = full_spectral_helper(d.real,
d.imag,
NFFT=NFFT,
Fs=Fs,
window=window,
detrend=detrend)
pii = pii.mean(1)
pqq = pqq.mean(1)
piq = piq.mean(1)
else:
pii, fr_orig = mlab.psd(d.real,
NFFT=NFFT,
Fs=Fs,
window=window,
detrend=detrend)
pqq, fr = mlab.psd(d.imag,
NFFT=NFFT,
Fs=Fs,
window=window,
detrend=detrend)
piq, fr = mlab.csd(d.real,
d.imag,
NFFT=NFFT,
Fs=Fs,
window=window,
detrend=detrend)
if use_log_bins:
fr, (pii, pqq, piq) = binning.log_bin_old(fr_orig, [pii, pqq, piq])
else:
fr = fr_orig
S, evals, evects, angles = calculate_pca_noise(pii, pqq, piq)
return fr, S, evals, evects, angles, piq
def tf_estimate(x, y, *args, **kwargs):
"""
Estimate transfer function from x to y, see csd (from
matplotlib.mlab package) for calling convention.
Link: https://stackoverflow.com/questions/28462144/python-version-of
-matlab-signal-toolboxs-tfestimate
The vectors *x* and *y* are divided into *NFFT* length segments.
Each segment is detrended by function *detrend* and windowed by
function *window*.
*noverlap* gives the length of the overlap between segments.
Parameters
----------
x : 1-D arrays or sequences
Arrays or sequences containing the data
y : 1-D arrays or sequences
Arrays or sequences containing the data
args : Default keyword values: None
kwargs : NFFT, Fs, detrend, window, noverlap, pad_to, sides, scale_by_freq
Returns
-------
frequency : float array
Frequency array
H : complex array
Transfer function estimate
Attributes
----------
p_xy: float array
Cross spectral density
p_xx: float array
Power spectral density
frequencies_csd: array
Frequency array for cross spectral density
frequencies_psd: array
Frequency array for power spectral density
"""
p_xy, frequencies_csd = csd(y, x, *args, **kwargs)
p_xx, frequencies_psd = psd(x, *args, **kwargs)
return frequencies_csd, (p_xy / p_xx).conjugate()
def pca_noise_with_errors(d,
NFFT,
Fs,
window=mlab.window_hanning,
detrend=mlab.detrend_mean,
use_log_bins=True):
# Assume the rotation is small so that the variance can be approximated using the values in the pre-PCA spectra.
# Take the variance to be the square of the power in each bin, divided by the number of averaged spectra.
n_averaged = d.size / NFFT
pii, pf = mlab.psd(d.real,
NFFT=NFFT,
Fs=Fs,
window=window,
detrend=detrend)
pqq, pf = mlab.psd(d.imag,
NFFT=NFFT,
Fs=Fs,
window=window,
detrend=detrend)
piq, pf = mlab.csd(d.real,
d.imag,
NFFT=NFFT,
Fs=Fs,
window=window,
detrend=detrend)
if use_log_bins:
bf, bc_ii, (bp_ii, bvar_ii) = binning.log_bin_with_variance(
pf, pii, pii**2 / n_averaged)
bf, bc_qq, (bp_qq, bvar_qq) = binning.log_bin_with_variance(
pf, pqq, pqq**2 / n_averaged)
bf, bc_iq, (bp_iq, bvar_iq) = binning.log_bin_with_variance(
pf, piq,
np.abs(piq)**2 / n_averaged) # probably not right
S, evals, evects, angles = calculate_pca_noise(bp_ii, bp_qq, bp_iq)
return bf, S, evals, evects, angles, (bp_ii, bp_qq,
bp_iq), bc_ii, np.vstack(
(bvar_qq, bvar_ii))
else:
S, evals, evects, angles = calculate_pca_noise(pii, pqq, piq)
return (pf, S, evals, evects, angles, (pii, piq, piq),
np.ones_like(pf),
np.vstack((pqq**2 / n_averaged, pii**2 / n_averaged)))
def pca_noise(d, NFFT=None, Fs=256e6/2.**11, window=mlab.window_hanning, detrend=mlab.detrend_mean,
use_log_bins=True, use_full_spectral_helper=True):
if NFFT is None:
NFFT = int(2 ** (np.floor(np.log2(d.shape[0])) - 3))
#print "using NFFT: 2**", np.log2(NFFT)
if use_full_spectral_helper:
pii, pqq, piq, fr_orig, t = full_spectral_helper(d.real, d.imag, NFFT=NFFT, Fs=Fs, window=window,
detrend=detrend)
pii = pii.mean(1)
pqq = pqq.mean(1)
piq = piq.mean(1)
else:
pii, fr_orig = mlab.psd(d.real, NFFT=NFFT, Fs=Fs, window=window, detrend=detrend)
pqq, fr = mlab.psd(d.imag, NFFT=NFFT, Fs=Fs, window=window, detrend=detrend)
piq, fr = mlab.csd(d.real, d.imag, NFFT=NFFT, Fs=Fs, window=window, detrend=detrend)
if use_log_bins:
fr, (pii, pqq, piq) = binning.log_bin_old(fr_orig, [pii, pqq, piq])
else:
fr = fr_orig
S, evals, evects, angles = calculate_pca_noise(pii, pqq, piq)
return fr, S, evals, evects, angles, piq
def csd(self, plot=True,nbandavg=1,**kwargs):
"""
Cross spectral density
nbandavg = Number of fft bins to average
"""
if self.isequal==False and self.VERBOSE:
print 'Warning - time series is unequally spaced consider using lomb-scargle fft'
NFFT = int(2**(np.floor(np.log2(self.ny/nbandavg)))) # Nearest power of 2 to length of data
Pyy,frq = mlab.csd(self.TSobs.y-self.TSobs.y.mean(),Fs=2*np.pi/self.dt,NFFT=NFFT,window=mlab.window_hanning,scale_by_freq=True)
if plot:
plt.loglog(frq,Pyy,**kwargs)
plt.xlabel('Freq. [$cycles s^{-1}$]')
plt.ylabel('PSD')
plt.grid(b=1)
return Pyy, frq
def calculate(self,NFFT=2**16,thresh=0.95):
self.pxx1,self.freq = mlab.psd(self.corrected_timeseries1.real,NFFT=NFFT,Fs=self.timeseries_sample_rate)
self.pii1,self.freq = mlab.psd(self.corrected_timeseries1.imag,NFFT=NFFT,Fs=self.timeseries_sample_rate)
self.pxx2,self.freq = mlab.psd(self.corrected_timeseries2.real,NFFT=NFFT,Fs=self.timeseries_sample_rate)
self.pii2,self.freq = mlab.psd(self.corrected_timeseries2.imag,NFFT=NFFT,Fs=self.timeseries_sample_rate)
self.coherence,self.coh_freq = mlab.cohere(self.corrected_timeseries1.real,self.corrected_timeseries2.real,
NFFT=NFFT,Fs=self.timeseries_sample_rate)
#print self.coherence.mean()
self.effective_dof = self.coherence.mean()*len(self.corrected_timeseries1)/(NFFT/2.)
self.effective_dof = 0.25*(len(self.corrected_timeseries1)/(NFFT/2.))
self.gamma95 = 1-(1-thresh)**(1./(self.effective_dof-1.))
self.mask95 = self.coherence > self.gamma95
self.csd,self.csd_freq = mlab.csd(self.corrected_timeseries1.real,self.corrected_timeseries2.real,
NFFT=NFFT,Fs=self.timeseries_sample_rate)
self.angle = np.angle(self.csd)
self.lpts1 = filters.low_pass_fir(self.corrected_timeseries1.real,cutoff=100.0,nyquist_freq=self.timeseries_sample_rate)
self.lpts2 = filters.low_pass_fir(self.corrected_timeseries2.real,cutoff=100.0,
nyquist_freq=self.timeseries_sample_rate)
def get_cross_spectra(self, x, y):
'''
Compute cross-spectra between x and y using the method implemented in
matplotlib.mlab.csd
Arguments
---------
*x*, *y* : np.ndarray
signals, shape (n_x/n_y, T), n_x/n_y is number of signals,
T the number of samples
Returns
-------
*C_xy* : np.ndarray
complex array if shape (n_x, n_y, NFFT) containing the cross-spectra
'''
n_x = x.shape[0]
n_y = y.shape[0]
#try:
# assert(n_x >= n_y)
#except AssertionError as ae:
# raise ae, 'n_x = {} < n_y = {}'.format(n_x, n_y)
#compute cross-spectra
C_xy = np.empty((n_x, n_y, self.NFFT), dtype=complex)
for i in range(n_x):
for j in range(n_y):
G, f = csd(x[i, ],
y[j, ],
NFFT=self.NFFT,
Fs=self.Fs,
noverlap=self.noverlap,
sides='twosided')
C_xy[i, j, ] = G
return C_xy
def gen_edges_wpli(x, fs=256, weighted=True):
"""
Generate weighted(optional) edges based on weighted phase lax index
:param x: (T, C)
:param weighted: True or False
:return: edge_index: (2, num_edges)
edge_weight:(num_edges, 1)
"""
x = x.T
channels, samples = x.shape
wpli = np.zeros((channels, channels))
pairs = [(i, j) for i in range(channels) for j in range(channels)]
for pair in pairs:
ch1, ch2 = x[pair,]
csdxy, _ = mlab.csd(ch1, ch2, Fs=fs, scale_by_freq=True,
sides='onesided')
i_xy = np.imag(csdxy)
num = np.nansum(np.abs(i_xy) * np.sign(i_xy))
denom = np.nansum(np.abs(i_xy))
wpli[pair] = np.abs(num / denom)
adj = wpli
adj[range(adj.shape[0]), range(adj.shape[0])] = 0
avg = np.sum(adj) / (adj.shape[0] * adj.shape[0] - adj.shape[0])
zeros_index = np.argwhere(adj <= avg)
adj[zeros_index[:, 0], zeros_index[:, 1]] = 0
edge_index = np.argwhere(adj != 0).T
if weighted:
edge_weight = adj[edge_index[0, :], edge_index[1, :]].reshape(-1, 1)
return edge_index, edge_weight
else:
return edge_index
def power_spectral_density( degrees, fourier_transform_size, stream_file,delta ):
cross_spectral_density = np.zeros((degrees, degrees, int((fourier_transform_size / 2)+1)),dtype=complex) # Store the data 01 by means of a three-dimensional matrix 5 * 5 * 1025
frequency = np.zeros((degrees, degrees, int((fourier_transform_size / 2)+1)),dtype=complex) # build the matrix...
n = stream_file.shape # dimensions of stream file lines x columns
stream_file = stream_file[1:]
if n[0] > n[1]:
acceleration = stream_file #acceleration receives the data from the read file
else:
acceleration = np.transpose(stream_file)#acceleration receives the data from the reading file in a transposed way
for i in range(0, degrees): #
for j in range(0, degrees): #
cross_spectral_density[:][i, j],frequency[:][i, j]= mlab.csd( # applying welch in matrix padding: cross spectral density and frequency
acceleration[:, i],
acceleration[:, j],
NFFT=fourier_transform_size,
Fs=delta,
detrend=mlab.detrend_none,
window=np.hanning(fourier_transform_size),
noverlap =( int(fourier_transform_size / 2)),
pad_to=None,
sides='default',
scale_by_freq=True
)
return cross_spectral_density, frequency
# Ps - frequencia de amostragem # detrend - tirar a tendencia (entra com uma funcao) # window - janela aplicada (default=hanning) # noverlap - comprimento de overlap (0=sem overlap) aa1 = mlab.psd(eta1,NFFT=256,Fs=1.28,detrend=mlab.detrend_mean,window=mlab.window_hanning,noverlap=128) aa1 = np.array(aa1).T f = aa1[:,1] sp = aa1[:,0] ## =================================================== ## # Espectro cruzado #espectro cruzado (amplitude do espec cruzado?) aa2 = mlab.csd(eta1,dspx1,NFFT=256,Fs=1.28,detrend=mlab.detrend_mean,window=mlab.window_hanning,noverlap=128) aa2 = np.array(aa2).T #calcula o modulo do espectro aa2[:,0] = abs(aa2[:,0]) #espectro de coerencia aa3 = mlab.cohere(eta1,dspx1,NFFT=256,Fs=1.28,detrend=mlab.detrend_mean,window=mlab.window_hanning,noverlap=128) aa3 = np.array(aa3).T ## Figuras #autoespectro pl.figure() pl.plot(aa[:,0],aa[:,1])
def sleeman(stream):
"""
Sleeman method calculating the noise of each trace of input stream.
:type stream: Stream object from module obspy.core.stream
:param stream: Stream containing 3 traces with the same signal recorded.
"""
#Copy original stream
m = stream.copy()
#Verify stream
if m[0].stats.sampling_rate != m[1].stats.sampling_rate \
or m[0].stats.sampling_rate != m[2].stats.sampling_rate \
or m[1].stats.sampling_rate != m[2].stats.sampling_rate:
print("[pyColocSensors.sleeman]: Sampling rates are not identical \
between traces")
if m[0].stats.npts != m[1].stats.npts \
or m[0].stats.npts != m[2].stats.npts \
or m[1].stats.npts != m[2].stats.npts:
print("[pyColocSensors.sleeman]: Traces does not have the same length")
if m[0].stats.starttime-m[1].stats.starttime >= m[0].stats.sampling_rate/2\
or m[1].stats.starttime-m[2].stats.starttime >= m[1].stats.sampling_rate/2\
or m[0].stats.starttime-m[2].stats.starttime >= m[0].stats.sampling_rate/2:\
print("[pyColocSensors.sleeman]: Traces does not have the same start time")
#Set psd and csd parameters. Set as McNamara recommands in his paper, \
#except for windows length, staticaly fixed to 1024, to improve resolution
#(doi: 10.1785/012003001)
n_fft = 1024
n_overlap = int(n_fft*0.75)
fs = m[0].stats.sampling_rate
#Calculate psd and csd
(P00,f) = mlab.psd(m[0].data,Fs=fs,NFFT=n_fft,noverlap=n_overlap,\
detrend=detrend_func,window=cosine_taper(n_fft,p=0.2),scale_by_freq=True)
(P11,f) = mlab.psd(m[1].data,Fs=fs,NFFT=n_fft,noverlap=n_overlap,\
detrend=detrend_func,window=cosine_taper(n_fft,p=0.2),scale_by_freq=True)
(P22,f) = mlab.psd(m[2].data,Fs =fs,NFFT=n_fft,noverlap=n_overlap,\
detrend=detrend_func,window=cosine_taper(n_fft,p=0.2),scale_by_freq=True)
(P01,f) = mlab.csd(m[0].data,m[1].data, Fs=fs,NFFT=n_fft,noverlap=n_overlap,\
detrend=detrend_func,window=cosine_taper(n_fft,p=0.2),scale_by_freq=True)
(P02,f) = mlab.csd(m[0].data,m[2].data, Fs=fs,NFFT=n_fft,noverlap=n_overlap,\
detrend=detrend_func,window=cosine_taper(n_fft,p=0.2),scale_by_freq=True)
P10 = np.conj(P01)
(P12,f) = mlab.csd(m[1].data,m[2].data, Fs=fs,NFFT=n_fft,noverlap=n_overlap,\
detrend=detrend_func,window=cosine_taper(n_fft,p=0.2),scale_by_freq=True)
P20 = np.conj(P02)
P21 = np.conj(P12)
#Apply corrections as McNamara recommends
for spectra in [P00,P11,P22,P01,P02,P10,P12,P20,P21]:
spectra = spectra*1.142857
#Calculate electronic noises acoording to Sleeman's method
N0 = P00-P10*P02/P12
N1 = P11-P21*P10/P20
N2 = P22-P02*P21/P01
#Remove first samples (3%) in order to avoid poor resolution problems.
#Samples remaining should be enough to cover one decade in frequency.
N0 = N0[int(n_fft*0.03):]
N1 = N1[int(n_fft*0.03):]
N2 = N2[int(n_fft*0.03):]
f = f[int(n_fft*0.03):]
return (N0,N1,N2,f)
def residual_spectrum(xres, fu, dt):
"""RESIDUAL_SPECTRUM: Computes statistics from an input spectrum over
a number of bands, returning the band limits and the estimates for
power spectra for real and imaginary parts and the cross-spectrum.
Mean values of the noise spectrum are computed for the following
8 frequency bands defined by their center frequency and band width:
M0 +.1 cpd; M1 +-.2 cpd; M2 +-.2 cpd; M3 +-.2 cpd; M4 +-.2 cpd;
M5 +-.2 cpd; M6 +-.21 cpd; M7 (.26-.29 cpd); and M8 (.30-.50 cpd).
S. Lentz 10/28/99
R. Pawlowicz 11/1/00
Version 1.0
Define frequency bands for spectral averaging.
"""
fband = np.array([[0.0001, 0.00417],
[0.03192, 0.04859],
[0.07218, 0.08884],
[0.11243, 0.1291],
[0.15269, 0.16936],
[0.19295, 0.20961],
[0.2332, 0.251],
[0.26, 0.29],
[0.3, 0.5]])
# If we have a sampling interval> 1 hour, we might have to get
# rid of some bins.
# fband(fband(:,1)>1/(2*dt),:)=[];
nfband = fband.shape[0]
nx = max(xres.shape)
# Spectral estimate (takes real time series only).
fx, Pxr = sps.welch(np.real(xres), window=np.hanning(nx),
noverlap=np.ceil(nx / 2), nfft=nx, fs=1/dt, nperseg=nx)
Pxr = Pxr / 2 / dt
fx, Pxi = sps.welch(np.imag(xres), window=np.hanning(nx),
noverlap=np.ceil(nx / 2), nfft=nx, fs=1/dt, nperseg=nx)
Pxi = Pxi / 2 / dt
Pxc, fx = mplm.csd(np.real(xres), np.imag(xres), nx, 1/dt)
# matlab cpsd returns only reals when given a real xres have to
# test for complex and maybe change to ifstatement
Pxc = np.real(Pxc)
Pxc = Pxc / 2 / dt
df = fx[2] - fx[1]
# Sets Px=NaN in bins close to analyzed frequencies
# to prevent leakage problems?).
Pxr[np.around(fu / df).astype(int)] = np.nan
Pxi[np.around(fu / df).astype(int)] = np.nan
Pxc[np.around(fu / df).astype(int)] = np.nan
Pxrave = np.zeros(shape=(nfband, 1), dtype='float64')
Pxiave = np.zeros(shape=(nfband, 1), dtype='float64')
Pxcave = np.zeros(shape=(nfband, 1), dtype='float64')
# Loop downwards in frequency through bands (cures short time series
# problem with no data in lowest band).
# Divide by nx to get power per frequency bin, and multiply by 2
# to account for positive and negative frequencies.
for k in range(nfband-1, -1, - 1):
jband = np.flatnonzero(np.all(np.vstack([fx >= fband[(k), 0],
fx <= fband[(k), 1],
np.isfinite(Pxr)]).T, axis=1))
if any(jband):
Pxrave[k] = np.dot(np.mean(Pxr[(jband)]), 2) / nx
Pxiave[k] = np.dot(np.mean(Pxi[(jband)]), 2) / nx
Pxcave[k] = np.dot(np.mean(Pxc[(jband)]), 2) / nx
else:
if k < nfband:
Pxrave[k] = Pxrave[(k + 1)]
# Low frequency bin might not have any points...
Pxiave[k] = Pxiave[(k + 1)]
Pxcave[k] = Pxcave[(k + 1)]
return fband, Pxrave, Pxiave, Pxcave
def get_spectra(time_series, method=None):
r"""
Compute the spectra of an n-tuple of time series and all of
the pairwise cross-spectra.
Parameters
----------
time_series: float array
The time-series, where time is the last dimension
method: dict, optional
contains: this_method:'welch'
indicates that :func:`mlab.psd` will be used in
order to calculate the psd/csd, in which case, additional optional
inputs (and default values) are:
NFFT=64
Fs=2pi
detrend=mlab.detrend_none
window=mlab.window_hanning
n_overlap=0
this_method:'periodogram_csd'
indicates that :func:`periodogram` will
be used in order to calculate the psd/csd, in which case, additional
optional inputs (and default values) are:
Skx=None
Sky=None
N=None
sides='onesided'
normalize=True
Fs=2pi
this_method:'multi_taper_csd'
indicates that :func:`multi_taper_psd` used in order to calculate
psd/csd, in which case additional optional inputs (and default
values) are:
BW=0.01
Fs=2pi
sides = 'onesided'
Returns
-------
f: float array
The central frequencies for the frequency bands for which the spectra
are estimated
fxy: float array
A semi-filled matrix with the cross-spectra of the signals. The csd of
signal i and signal j is in f[j][i], but not in f[i][j] (which will be
filled with zeros). For i=j fxy[i][j] is the psd of signal i.
"""
if method is None:
method = {'this_method': 'welch'} # The default
# If no choice of method was explicitely set, but other parameters were
# passed, assume that the method is mlab:
this_method = method.get('this_method', 'welch')
if this_method == 'welch':
NFFT = method.get('NFFT', 64)
Fs = method.get('Fs', 2 * np.pi)
detrend = method.get('detrend', mlab.detrend_none)
window = method.get('window', mlab.window_hanning)
n_overlap = method.get('n_overlap', int(np.ceil(NFFT / 2.0)))
# The length of the spectrum depends on how many sides are taken, which
# depends on whether or not this is a complex object:
if np.iscomplexobj(time_series):
fxy_len = NFFT
else:
fxy_len = NFFT / 2.0 + 1
# If there is only 1 channel in the time-series:
if len(time_series.shape) == 1 or time_series.shape[0] == 1:
temp, f = mlab.csd(time_series, time_series,
NFFT, Fs, detrend, window, n_overlap,
scale_by_freq=True)
fxy = temp.squeeze() # the output of mlab.csd has a weird
# shape
else:
fxy = np.zeros((time_series.shape[0],
time_series.shape[0],
fxy_len), dtype=complex) # Make sure it's complex
for i in xrange(time_series.shape[0]):
for j in xrange(i, time_series.shape[0]):
#Notice funny indexing, in order to conform to the
#conventions of the other methods:
temp, f = mlab.csd(time_series[j], time_series[i],
NFFT, Fs, detrend, window, n_overlap,
scale_by_freq=True)
fxy[i][j] = temp.squeeze() # the output of mlab.csd has a
# wierd shape
elif this_method in ('multi_taper_csd', 'periodogram_csd'):
# these methods should work with similar signatures
mdict = method.copy()
func = eval(mdict.pop('this_method'))
freqs, fxy = func(time_series, **mdict)
f = utils.circle_to_hz(freqs, mdict.get('Fs', 2 * np.pi))
else:
raise ValueError("Unknown method provided")
return f, fxy.squeeze()
from numpy import loadtxt, savetxt
from optparse import OptionParser
parser = OptionParser()
parser.add_option("-f", "--file", dest="filename")
parser.add_option("-p", "--power", type="int", dest="power", default=int(14))
parser.add_option("-e", "--overlap", type="int", dest="overlap", default=int(10))
parser.add_option("-o", "--output", type="string", dest="output", default="output.dat")
(options, args) = parser.parse_args()
print "options.power = ", options.power
print "options.overlap = ", options.overlap
x = loadtxt(options.filename)
print "x.shape = ", x.shape
print "x.ndim = ", x.ndim
if x.ndim==1:
psx, fr = psd(x, NFFT=2**options.power, detrend=detrend_mean, noverlap=options.overlap)
elif x.ndim==2:
psx, fr = csd(x[:, 0], x[:, 1], NFFT=2**options.power, detrend=detrend_mean, noverlap=options.overlap)
else:
raise(DimensionError)
fr = fr.reshape(-1, 1)
psx = psx.reshape(-1, 1)
print "psx.shape = ", psx.shape
print "fr.shape = ", fr.shape
savetxt(options.output, hstack((fr, abs(psx))))
def residual_spectrum(xres, fu, dt):
"""RESIDUAL_SPECTRUM: Computes statistics from an input spectrum over
a number of bands, returning the band limits and the estimates for
power spectra for real and imaginary parts and the cross-spectrum.
Mean values of the noise spectrum are computed for the following
8 frequency bands defined by their center frequency and band width:
M0 +.1 cpd; M1 +-.2 cpd; M2 +-.2 cpd; M3 +-.2 cpd; M4 +-.2 cpd;
M5 +-.2 cpd; M6 +-.21 cpd; M7 (.26-.29 cpd); and M8 (.30-.50 cpd).
S. Lentz 10/28/99
R. Pawlowicz 11/1/00
Version 1.0
Define frequency bands for spectral averaging.
"""
fband = np.array([0.0001, 0.00417, 0.03192, 0.04859, 0.07218, 0.08884, 0.11243, 0.1291, 0.15269, 0.16936, 0.19295, 0.20961, 0.2332, 0.251, 0.26, 0.29, 0.3, 0.5]).reshape(9,2)
# If we have a sampling interval> 1 hour, we might have to get
# rid of some bins.
#fband(fband(:,1)>1/(2*dt),:)=[];
nfband = fband.shape[0]
nx = max(xres.shape)
# Spectral estimate (takes real time series only).
# Matlab has changed their spectral estimator functions
# To match the old code, I have to divide by 2*dt. This is because
#
# PSD*dt is two-sided spectrum in units of power per hertz.
#
# PWELCH is the one-sided spectrum in power per hertz
#
# So PWELCH/2 = PSD*dt
#[Pxr,fx]=psd(real(xres),nx,1/dt);
# Call to SIGNAL PROCESSING TOOLBOX - see note in t_readme. If you have an error here you are probably missing this toolbox
#[Pxi,fx]=psd(imag(xres),nx,1/dt);
# Call to SIGNAL PROCESSING TOOLBOX - see note in t_readme.
#[Pxc,fx]=csd(real(xres),imag(xres),nx,1/dt);
# Call to SIGNAL PROCESSING TOOLBOX - see note in t_readme.
Pxr, fx = sps.welch(np.real(xres), window=np.hanning(nx), noverlap=np.ceil(nx / 2),nfft=nx,fs=1/dt) # nargout=2
# Call to SIGNAL PROCESSING TOOLBOX - see note in t_readme. If you have an error here you are probably missing this toolbox
Pxr = Pxr / 2 / dt
Pxi, fx = sps.welch(np.imag(xres), window=np.hanning(nx), noverlap=np.ceil(nx / 2),nfft=nx,fs=1/dt) # nargout=2
# Call to SIGNAL PROCESSING TOOLBOX - see note in t_readme.
Pxi = Pxi / 2 / dt
Pxc, fx = mplm.csd(np.real(xres), np.imag(xres),nx,1 / dt) # nargout=2
# Call to SIGNAL PROCESSING TOOLBOX - see note in t_readme.
Pxc = Pxc / 2 / dt
df = fx[2] - fx[1]
Pxr[np.around(fu / df).astype(int) ] = np.nan
# Sets Px=NaN in bins close to analyzed frequencies
Pxi[np.around(fu / df).astype(int)] = np.nan
# (to prevent leakage problems?).
Pxc[np.around(fu / df).astype(int)] = np.nan
Pxrave = np.zeros(shape=(nfband, 1), dtype='float64')
Pxiave = np.zeros(shape=(nfband, 1), dtype='float64')
Pxcave = np.zeros(shape=(nfband, 1), dtype='float64')
# Loop downwards in frequency through bands (cures short time series
# problem with no data in lowest band).
#
# Divide by nx to get power per frequency bin, and multiply by 2
# to account for positive and negative frequencies.
#
for k in range(nfband-1, -1, - 1):
jband = np.flatnonzero(np.all(np.vstack([fx >= fband[(k), 0],fx <= fband[(k), 1] , np.isfinite(Pxr)]).T,axis=1))
if any(jband):
Pxrave[k] = np.dot(np.mean(Pxr[(jband)]), 2) / nx
Pxiave[k] = np.dot(np.mean(Pxi[(jband)]), 2) / nx
Pxcave[k] = np.dot(np.mean(Pxc[(jband)]), 2) / nx
else:
if k < nfband:
Pxrave[k] = Pxrave[(k + 1)]
# Low frequency bin might not have any points...
Pxiave[k] = Pxiave[(k + 1)]
Pxcave[k] = Pxcave[(k + 1)]
return fband, Pxrave, Pxiave, Pxcave
def ut_pdgm(t,e,cfrq,equi,frqosmp):
#import pdb; pdb.set_trace()
P = {}
nt = len(e)
# matches MatLab hann
# want to switch to this in future
#hn = np.hanning(nt)
# Matches matlab hanning
hn = np.hanning(nt+2)
hn = hn[1:-1]
if equi:
# matlab pwelch
# pwelch(x,window,noverlap,nfft)
#[Puu1s,allfrq] = pwelch(real(e),hn,0,nt);
# Puu1s, allfrq = scipy.signal.welch(np.real(e), window='hanning',
# noverlap=0, nfft=nt, fs=2*np.pi)
# allfrq, Puu1s = scipy.signal.welch(np.real(e), window='hanning',
# noverlap=0, nfft=nt, fs=2*np.pi,
# detrend='constant',
# scaling='density')
# allfrq, Puu1s = scipy.signal.periodogram(np.real(e), window='hanning',
# nfft=nt, fs=2*np.pi,
# detrend='constant',
# scaling='density')
allfrq, Puu1s = scipy.signal.welch(np.real(e), window=hn, noverlap=0,
nfft=nt, fs=2*np.pi)
#hn = mlab.window_hanning(t)
#Puu1s, allfrq = mlab.psd(np.real(e), window=hn, noverlap=0, NFFT=nt, Fs=2*np.pi)
else:
# ut_lmbscga
# Here I think scipy.signal.lombscargle(x,y,freqs) should work. Look
# into it.
pass
#import pdb; pdb.set_trace()
fac = (nt-1)/(2*np.pi*(t[-1]-t[0])*24) # conv fac: rad/sample to cph
allfrq = allfrq*fac # to [cycle/hour] from [rad/samp]
Puu1s = Puu1s / fac # to [e units^2/cph] from [e units^2/(rad/samp)]
#import pdb; pdb.set_trace()
P['Puu'], P['fbnd'] = ut_fbndavg(Puu1s, allfrq, cfrq)
if not np.isreal(e).all():
if equi:
#Pvv1s, _ = pwelch(np.imag(e),hn,0,nt)
temp, Pvv1s = scipy.signal.welch(np.imag(e),window=hn, noverlap=0,
nfft=nt, fs=2*np.pi)
#temp, Pvv1s = scipy.signal.welch(np.imag(e),window=hn, noverlap=0, nfft=nt, fs=2*np.pi)
# should be able to use mlab.csd
#Puv1s, _ = cpsd(np.real(e),np.imag(e),hn,0,nt)
#Pvv1s, temp = mlab.psd(np.imag(e), window=hn, noverlap=0, NFFT=nt, Fs=2*np.pi, sides='default')
Puv1s, temp = mlab.csd(np.real(e),np.imag(e), noverlap=0, NFFT=nt, window=hn, Fs=2*np.pi)
else:
#Pvv1s, _ = ut_lmbscga(imag(e),t,hn,frqosmp);
#Puv1s, _ = ut_lmbscgc(real(e),imag(e),t,hn,frqosmp);
pass
Pvv1s = Pvv1s/fac
P['Pvv'], _ = ut_fbndavg(Pvv1s,allfrq,cfrq)
Puv1s = np.real(Puv1s)/fac
P['Puv'], _ = ut_fbndavg(Puv1s,allfrq,cfrq)
P['Puv'] = np.abs(P['Puv'])
#import pdb; pdb.set_trace()
return P
def DifResMlabCsd(data1, data2, fs):
P1, f1 = mlab.csd(data1, data2, len(data1), Fs=fs, window=mlab.window_hanning)
P2, f2 = mlab.csd(data1, data2, len(data1)/10, Fs=fs, window=mlab.window_hanning)
P3, f3 = mlab.csd(data1, data2, len(data1)/100, Fs=fs, window=mlab.window_hanning)
return f1, P1, f2, P2, f3, P3
def tfe(y, x, *args, **kwargs):
"""estimate transfer function from x to y,
see csd for calling convention"""
sxy, fxy = csd(y, x, *args, **kwargs)
sxx, fxx = psd(x, *args, **kwargs)
return sxy / sxx, fxx
def cp(tr1,tr2,lenfft,lenol,delta): sr = 1/delta cpval,fre = csd(tr1.data,tr2.data,NFFT=lenfft,Fs=sr,noverlap=lenol,scale_by_freq=True) fre = fre[1:] cpval = cpval[1:] return cpval, fre
def csd(plot, *args, **kwargs):
"""PlotFactory Wrapper of matplotlib.csd : Compute the csd(cross-spectral) of *data1* vs *data2*
contrarly to matplolib.psd, return a new xyplot factory instance
ready to plot result of the csd.
Different Parameters than matplotlib:
data1 : fisrt data set
data2 : second data set They can be liases to "x" and "y" for instance
direction ("y"/"x") : in wich axis the spectrum is ploted, default is "y"
Machined Parameters (if direction=="y"):
x : alias('freqs')
y : 10*log10(psd)
freqs : frequences
csd : psd result in linear space
data : the input data
xlabel, ylabel : are set if not already set
ymin, ymax : set to 0, alias('spec') (for vlines plot)
min, max, lines : set to 0, alias('spec'), alias('freq')
if direction == "x" swap above x's and y's
the matplotlib doc is copied below
Remember that this return a xyplot instance the output of spectrograph
are in "csd", "freqs" -> csd, freqs =getargs("csd", "freqs")
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"""
plot.update(kwargs.pop(KWS,{}), **kwargs)
(data1, data2,
NFFT, Fs, Fc, detrend,
window, noverlap, pad_to,
sides, scale_by_freq) = plot.parseargs(args,
"data1", "data2",
"NFFT", "Fs", "Fc", "detrend",
"window", "noverlap", "pad_to",
"sides", "scale_by_freq",
NFFT=None, Fs=None, Fc=None, detrend=None,
window=None, noverlap=None, pad_to=None,
sides=None, scale_by_freq=None
)
if Fc is None:
Fc = 0
pxy, freqs = mlab.csd(x=data1, y=data2, NFFT=NFFT, Fs=Fs, detrend=detrend,
window=window, noverlap=noverlap, pad_to=pad_to,
sides=sides, scale_by_freq=scale_by_freq)
pxy.shape = len(freqs),
# pxy is complex
freqs += Fc
di, dd = plot._get_direction()
plot.update( {di:alias('freqs'), dd:10 * np.log10(pxy),
dd+"min":0, dd+"max":alias(dd)},
min=0, max=alias(dd), lines=alias('freqs'),
csd=pxy, freqs=freqs, data1=data1,data2=data2,
Fc=Fc)
plot.locals.setdefault(di+"label", 'Frequency')
plot.locals.setdefault(dd+"label", 'Cross Spectrum Magnitude (dB)')
plot.axes.update(grid=True)
plot.goifgo()