def OnClick(self, e):
obj_list = mm.list_selected_objects(remote)
mm.select_objects(remote, [obj_list[0]])
cur_groups = mm.list_selected_groups(remote)
if len(cur_groups) == 0:
self.text.SetValue("Error! Please select an area")
else:
self.text.SetValue("Computing...")
centroid = mm.get_face_selection_centroid(remote)
(bFound, Frame) = mm.find_nearest(remote, centroid)
flag_done=0
for size in hole_sizes:
if size in used_sizes:
continue
print("Test:"+str(size)+":"+str(TestFit(Frame,[size,size,size],5)))
if TestFit(Frame,[size,size,size],5):
print("Created size with"+str(size))
used_sizes.append(size)
create_ring(Frame,[8,2,8])
drill_holes(Frame,pipe_filename,[1,0.5,1],0,0)
drill_holes(Frame,hole_filename,[size,size,size],5,1)
flag_done=1
break
if flag_done==0:
self.text.SetValue("Unable to create hole here, Please select another area")
else:
dlg = wx.TextEntryDialog(self,'What you want here', 'Text Entry Dialog','',wx.ICON_QUESTION | wx.OK | wx.CANCEL,(dis_size[0]-300,200))
if dlg.ShowModal() == wx.ID_OK:
function_call[size]=str(dlg.GetValue())
pickle.dump(function_call,open( "function_dict.p", "wb"))
self.text.SetValue("updated:"+dlg.GetValue())
dlg.Destroy()
def addPosition(event):
cur_groups = mm.list_selected_groups(remote)
if len(cur_groups) == 0:
setStatusText("Error! Please select an area")
else:
centroid = mm.get_face_selection_centroid(remote)
(bFound, Frame) = mm.find_nearest(remote, centroid)
selected_area.append(Frame)
mm.clear_face_selection(remote)
setStatusText("Position Added")
def addPosition(event):
""" Function that is called when "Add Position" is pressed """
# check that we have a selection
cur_groups = mm.list_selected_groups(remote)
if len(cur_groups) == 0:
setStatusText("Error! Please select an area")
else:
centroid = mm.get_face_selection_centroid(remote)
sel_ctr = centroid
(bFound, Frame) = mm.find_nearest(remote, sel_ctr)
selected_area.append(Frame)
mm.clear_face_selection(remote)
setStatusText("Position Added")
def OnAdd(self, e):
global frame_dict
cur_groups = mm.list_selected_groups(remote)
if len(cur_groups) == 0:
self.text.SetValue("Error! Please select an area")
else:
centroid = mm.get_face_selection_centroid(remote)
(bFound, Frame) = mm.find_nearest(remote, centroid)
create_ring(mm.list_selected_objects(remote)[0], Frame, [8, 2, 8])
selected_area.append(Frame)
mm.clear_face_selection(remote)
dlg = wx.TextEntryDialog(self, 'What you want here',
'Text Entry Dialog', '',
wx.ICON_QUESTION | wx.OK | wx.CANCEL,
(dis_size[0] - 400, 300))
if dlg.ShowModal() == wx.ID_OK:
frame_dict[Frame] = str(dlg.GetValue())
dlg.Destroy()
self.text.SetValue("Position Added")
def addPosition(event):
obj_list = mm.list_selected_objects(remote)
mm.select_objects(remote, [obj_list[0]])
# check that we have a selection
cur_groups = mm.list_selected_groups(remote)
if len(cur_groups) == 0:
setStatusText("Error! Please select an area")
else:
print("1:")
setStatusText("Computing...")
centroid = mm.get_face_selection_centroid(remote)
(bFound, Frame) = mm.find_nearest(remote, centroid)
flag_done = 0
for size in hole_sizes:
if size in used_sizes:
continue
print("Test:" + str(size) + ":" +
str(TestFit(Frame, [size, size, size], 5)))
if TestFit(Frame, [size, size, size], 5):
print("Created size with" + str(size))
used_sizes.append(size)
create_ring(Frame, [8, 2, 8])
drill_holes(Frame, pipe_filename, [1, 0.5, 1], 0, 0)
drill_holes(Frame, hole_filename, [size, size, size], 5, 1)
flag_done = 1
break
print("2:" + str(flag_done))
if flag_done == 0:
setStatusText(
"Unable to create hole here, Please select another area")
else:
#text = ask(message = 'What do you want to do here?')
#function_call[size]=text
#pickle.dump( function_call, open( "function_dict.p", "wb" ) )
setStatusText("Position added, now you can select another area")
#selected_area.append(Frame)
mm.clear_face_selection(remote)
# now Offset is done, and shell is selected. Next we Separate it mm.begin_tool(r, "separate") mm.accept_tool(r) # read back current selection (will be shell) shell_objects = mm.list_selected_objects(r) mm.set_object_name(r, shell_objects[0], "shell") # set current as target (will be offset shell) mm.set_as_target(r) # restore original selection mm.select_objects(r, initial_selection) # select an area on the surface (found,sfc_pt) = mm.find_nearest(r, (1,1,1)) mm.select_inside_sphere(r, sfc_pt.origin, mm.toS(r,10.0)) # run Attract to Target tool mm.begin_tool(r, "attractToTarget") mm.accept_tool(r) # clear target and/or delete shell #mm.clear_target(remote) #mm.delete_objects(remote, shell_objects) #done! r.shutdown();
mm.accept_tool(r) # now Offset is done, and shell is selected. Next we Separate it mm.begin_tool(r, "separate") mm.accept_tool(r) # read back current selection (will be shell) shell_objects = mm.list_selected_objects(r) mm.set_object_name(r, shell_objects[0], "shell") # set current as target (will be offset shell) mm.set_as_target(r) # restore original selection mm.select_objects(r, initial_selection) # select an area on the surface (found, sfc_pt) = mm.find_nearest(r, (1, 1, 1)) mm.select_inside_sphere(r, sfc_pt.origin, mm.toS(r, 10.0)) # run Attract to Target tool mm.begin_tool(r, "attractToTarget") mm.accept_tool(r) # clear target and/or delete shell #mm.clear_target(remote) #mm.delete_objects(remote, shell_objects) #done! r.shutdown()
# check that we have a selection
cur_groups = mm.list_selected_groups(remote)
if len(cur_groups) == 0:
print "this script requires an active Face Selection"
raw_input("Press Enter to exit...")
os._exit(1)
# assumption: we have object we want to modify selected,
# and there is a selection made on this object
obj_list = mm.list_selected_objects(remote)
# find center of current selection, and then closest point on surface
# this gives us a 3D frame we can align an object to
centroid = mm.get_face_selection_centroid(remote)
sel_ctr = centroid
(bFound, selFrame) = mm.find_nearest(remote, sel_ctr)
# exit out of selection tool
mm.clear_face_selection(remote)
for size in [0.5]:
# import part we want to position at selection
new_objs = mm.append_objects_from_file(remote, pipe_filename)
# select imported part
mm.select_objects(remote, new_objs)
mm.begin_tool(remote, "transform")
mm.set_toolparam(remote, "scale", [1, size, 1])
#mm.set_toolparam(remote, "translation", [0,0,0])
mm.accept_tool(remote)
# check that we have a selection
cur_groups = mm.list_selected_groups(remote)
if len(cur_groups) == 0:
print "this script requires an active Face Selection"
raw_input("Press Enter to exit...")
os._exit(1)
# assumption: we have object we want to modify selected,
# and there is a selection made on this object
obj_list = mm.list_selected_objects(remote)
# find center of current selection, and then closest point on surface
# this gives us a 3D frame we can align an object to
centroid = mm.get_face_selection_centroid(remote)
sel_ctr = centroid
(bFound, selFrame) = mm.find_nearest(remote, sel_ctr)
# exit out of selection tool
mm.clear_face_selection(remote)
# import part we want to position at selection
new_objs = mm.append_objects_from_file(remote, part_filename);
# select imported part
mm.select_objects(remote, new_objs)
# get bbox of part, so that we can put origin at bottom of object if desired
# (we are assuming that in its file, the part is positioned at the origin, on the ground plane)
(min,max) = mm.get_selected_bounding_box(remote)
# start transform tool
print "scene bbox min: ", fMin print "scene bbox max: ", fMax # convert to world-space (ie current units) fMinW = mm.to_world(r, fMin) fMaxW = mm.to_world(r, fMax) print "world bbox min: ", fMinW print "world bbox max: ", fMaxW print "one world unit in scene dimensions: ", mm.to_scene(r, 1.0) print "\n" # construct a ray from far-away-pt through center of bbox, along +Z axis center = lerpv3(fMin, fMax, 0.5) diag = subv3(fMax, fMin) ray_dir = (0.0,0.0,1.0) ray_origin = subv3(center, mulv3s(ray_dir, 25.0*max(diag))) # hit-test ray against object (bHit, hitFrame) = mm.find_ray_hit(r, ray_origin, ray_dir) print "hit: ", bHit, " world pos: ", hitFrame.origin; # find nearest point on sfc to (-2,0,0) (bFound, nearFrame) = mm.find_nearest(r, (-2,0,0) ) print "found: ", bFound, " world pos: ", mm.toW(r, nearFrame.origin); #done! r.shutdown()
