def test_polar_box():
# Remove this line when this test image is regenerated.
plt.rcParams['text.kerning_factor'] = 6
fig = plt.figure(figsize=(5, 5))
# PolarAxes.PolarTransform takes radian. However, we want our coordinate
# system in degree
tr = Affine2D().scale(np.pi / 180., 1.) + PolarAxes.PolarTransform()
# polar projection, which involves cycle, and also has limits in
# its coordinates, needs a special method to find the extremes
# (min, max of the coordinate within the view).
extreme_finder = angle_helper.ExtremeFinderCycle(20, 20,
lon_cycle=360,
lat_cycle=None,
lon_minmax=None,
lat_minmax=(0, np.inf))
grid_locator1 = angle_helper.LocatorDMS(12)
tick_formatter1 = angle_helper.FormatterDMS()
grid_helper = GridHelperCurveLinear(tr,
extreme_finder=extreme_finder,
grid_locator1=grid_locator1,
tick_formatter1=tick_formatter1)
ax1 = SubplotHost(fig, 1, 1, 1, grid_helper=grid_helper)
ax1.axis["right"].major_ticklabels.set_visible(True)
ax1.axis["top"].major_ticklabels.set_visible(True)
# let right axis shows ticklabels for 1st coordinate (angle)
ax1.axis["right"].get_helper().nth_coord_ticks = 0
# let bottom axis shows ticklabels for 2nd coordinate (radius)
ax1.axis["bottom"].get_helper().nth_coord_ticks = 1
fig.add_subplot(ax1)
ax1.axis["lat"] = axis = grid_helper.new_floating_axis(0, 45, axes=ax1)
axis.label.set_text("Test")
axis.label.set_visible(True)
axis.get_helper().set_extremes(2, 12)
ax1.axis["lon"] = axis = grid_helper.new_floating_axis(1, 6, axes=ax1)
axis.label.set_text("Test 2")
axis.get_helper().set_extremes(-180, 90)
# A parasite axes with given transform
ax2 = ParasiteAxes(ax1, tr, viewlim_mode="equal")
assert ax2.transData == tr + ax1.transData
# Anything you draw in ax2 will match the ticks and grids of ax1.
ax1.parasites.append(ax2)
ax2.plot(np.linspace(0, 30, 50), np.linspace(10, 10, 50))
ax1.set_aspect(1.)
ax1.set_xlim(-5, 12)
ax1.set_ylim(-5, 10)
ax1.grid(True)
def curvelinear_test2(fig):
"""
polar projection, but in a rectangular box.
"""
# PolarAxes.PolarTransform takes radian. However, we want our coordinate
# system in degree
tr = Affine2D().scale(np.pi/180., 1.) + PolarAxes.PolarTransform()
# polar projection, which involves cycle, and also has limits in
# its coordinates, needs a special method to find the extremes
# (min, max of the coordinate within the view).
# 20, 20 : number of sampling points along x, y direction
extreme_finder = angle_helper.ExtremeFinderCycle(50, 50,
lon_cycle = 360,
lat_cycle = None,
lon_minmax = None,
lat_minmax = (0, np.inf),
)
grid_locator1 = angle_helper.LocatorDMS(12)
# Find a grid values appropriate for the coordinate (degree,
# minute, second).
tick_formatter1 = angle_helper.FormatterDMS()
# And also uses an appropriate formatter. Note that,the
# acceptable Locator and Formatter class is a bit different than
# that of mpl's, and you cannot directly use mpl's Locator and
# Formatter here (but may be possible in the future).
grid_helper = GridHelperCurveLinear(tr,
extreme_finder=extreme_finder,
grid_locator1=grid_locator1,
tick_formatter1=tick_formatter1
)
ax1 = SubplotHost(fig, 1, 1, 1, grid_helper=grid_helper)
# make ticklabels of right and top axis visible.
ax1.axis["right"].major_ticklabels.set_visible(True)
ax1.axis["top"].major_ticklabels.set_visible(True)
ax1.axis["left"].major_ticklabels.set_visible(True)
# let right axis shows ticklabels for 1st coordinate (angle)
ax1.axis["right"].get_helper().nth_coord_ticks=0
# let bottom axis shows ticklabels for 2nd coordinate (radius)
ax1.axis["bottom"].get_helper().nth_coord_ticks=0
ax1.axis["left"].get_helper().nth_coord_ticks=0
fig.add_subplot(ax1)
ax1.quiver(0,0,50,50,angles='xy',scale_units='xy',scale=1)
ax1.set_aspect(1.)
ax1.set_xlim(-100, 100)
ax1.set_ylim(-100, 100)
ax1.grid(True)
def curvelinear_test2(fig):
"""
polar projection, but in a rectangular box.
"""
tr = Affine2D().scale(np.pi/180., 1.) + PolarAxes.PolarTransform()
extreme_finder = angle_helper.ExtremeFinderCycle(20, 20,
lon_cycle = 360,
lat_cycle = None,
lon_minmax = None,
lat_minmax = (0, np.inf),
)
grid_locator1 = angle_helper.LocatorDMS(12)
tick_formatter1 = angle_helper.FormatterDMS()
grid_helper = GridHelperCurveLinear(tr,
extreme_finder=extreme_finder,
grid_locator1=grid_locator1,
tick_formatter1=tick_formatter1
)
ax1 = SubplotHost(fig, 1, 2, 2, grid_helper=grid_helper)
ax1.axis["right"].major_ticklabels.set_visible(True)
ax1.axis["top"].major_ticklabels.set_visible(True)
ax1.axis["right"].get_helper().nth_coord_ticks=0
ax1.axis["bottom"].get_helper().nth_coord_ticks=1
fig.add_subplot(ax1)
ax2 = ParasiteAxesAuxTrans(ax1, tr, "equal")
ax1.parasites.append(ax2)
intp = cbook.simple_linear_interpolation
ax2.plot(intp(np.array([0, 30]), 50),
intp(np.array([10., 10.]), 50))
ax1.set_aspect(1.)
ax1.set_xlim(-5, 12)
ax1.set_ylim(-5, 10)
ax1.grid(True)
def curvelinear_test2(fig, rect=111):
"""
Polar projection, but in a rectangular box.
"""
# see demo_curvelinear_grid.py for details
tr = Affine2D().translate(0, 90) + Affine2D().scale(np.pi / 180., 1.) + \
PolarAxes.PolarTransform()
extreme_finder = angle_helper.ExtremeFinderCycle(
10,
60,
lon_cycle=360,
lat_cycle=None,
lon_minmax=None,
lat_minmax=(-90, np.inf),
)
# Changes theta gridline count
grid_locator1 = angle_helper.LocatorHMS(12)
grid_locator2 = angle_helper.LocatorDMS(6)
tick_formatter1 = angle_helper.FormatterHMS()
tick_formatter2 = angle_helper.FormatterDMS()
grid_helper = GridHelperCurveLinear(tr,
extreme_finder=extreme_finder,
grid_locator1=grid_locator1,
grid_locator2=grid_locator2,
tick_formatter1=tick_formatter1,
tick_formatter2=tick_formatter2)
ax1 = SubplotHost(fig, rect, grid_helper=grid_helper)
# make ticklabels of right and top axis visible.
ax1.axis["right"].major_ticklabels.set_visible(True)
ax1.axis["top"].major_ticklabels.set_visible(True)
ax1.axis["bottom"].major_ticklabels.set_visible(True)
# let right and bottom axis show ticklabels for 1st coordinate (angle)
ax1.axis["right"].get_helper().nth_coord_ticks = 0
ax1.axis["bottom"].get_helper().nth_coord_ticks = 0
#
fig.add_subplot(ax1)
grid_helper = ax1.get_grid_helper()
# You may or may not need these - they set the view window explicitly
# rather than using the default as determined by matplotlib with extreme
# finder.
ax1.set_aspect(1.)
ax1.set_xlim(-4, 25) # moves the origin left-right in ax1
ax1.set_ylim(-2.5, 30) # moves the origin up-down
ax1.set_ylabel('$DEC\,(^{\circ})$')
ax1.set_xlabel('$RA\,(h)$')
ax1.grid(True)
# ax1.grid(linestyle='--', which='x') # either keyword applies to both
# ax1.grid(linestyle=':', which='y') # sets of gridlines
return ax1, tr
def test_custom_transform():
class MyTransform(Transform):
input_dims = output_dims = 2
def __init__(self, resolution):
"""
Resolution is the number of steps to interpolate between each input
line segment to approximate its path in transformed space.
"""
Transform.__init__(self)
self._resolution = resolution
def transform(self, ll):
x, y = ll.T
return np.column_stack([x, y - x])
transform_non_affine = transform
def transform_path(self, path):
ipath = path.interpolated(self._resolution)
return Path(self.transform(ipath.vertices), ipath.codes)
transform_path_non_affine = transform_path
def inverted(self):
return MyTransformInv(self._resolution)
class MyTransformInv(Transform):
input_dims = output_dims = 2
def __init__(self, resolution):
Transform.__init__(self)
self._resolution = resolution
def transform(self, ll):
x, y = ll.T
return np.column_stack([x, y + x])
def inverted(self):
return MyTransform(self._resolution)
fig = plt.figure()
SubplotHost = host_subplot_class_factory(Axes)
tr = MyTransform(1)
grid_helper = GridHelperCurveLinear(tr)
ax1 = SubplotHost(fig, 1, 1, 1, grid_helper=grid_helper)
fig.add_subplot(ax1)
ax2 = ParasiteAxes(ax1, tr, viewlim_mode="equal")
ax1.parasites.append(ax2)
ax2.plot([3, 6], [5.0, 10.])
ax1.set_aspect(1.)
ax1.set_xlim(0, 10)
ax1.set_ylim(0, 10)
ax1.grid(True)
def test_polar_box():
fig = plt.figure(figsize=(5, 5))
# PolarAxes.PolarTransform takes radian. However, we want our coordinate
# system in degree
tr = Affine2D().scale(np.pi / 180., 1.) + PolarAxes.PolarTransform()
# polar projection, which involves cycle, and also has limits in
# its coordinates, needs a special method to find the extremes
# (min, max of the coordinate within the view).
extreme_finder = angle_helper.ExtremeFinderCycle(20, 20,
lon_cycle=360,
lat_cycle=None,
lon_minmax=None,
lat_minmax=(0, np.inf))
grid_locator1 = angle_helper.LocatorDMS(12)
tick_formatter1 = angle_helper.FormatterDMS()
grid_helper = GridHelperCurveLinear(tr,
extreme_finder=extreme_finder,
grid_locator1=grid_locator1,
tick_formatter1=tick_formatter1)
ax1 = SubplotHost(fig, 1, 1, 1, grid_helper=grid_helper)
ax1.axis["right"].major_ticklabels.set_visible(True)
ax1.axis["top"].major_ticklabels.set_visible(True)
# let right axis shows ticklabels for 1st coordinate (angle)
ax1.axis["right"].get_helper().nth_coord_ticks = 0
# let bottom axis shows ticklabels for 2nd coordinate (radius)
ax1.axis["bottom"].get_helper().nth_coord_ticks = 1
fig.add_subplot(ax1)
ax1.axis["lat"] = axis = grid_helper.new_floating_axis(0, 45, axes=ax1)
axis.label.set_text("Test")
axis.label.set_visible(True)
axis.get_helper()._extremes = 2, 12
ax1.axis["lon"] = axis = grid_helper.new_floating_axis(1, 6, axes=ax1)
axis.label.set_text("Test 2")
axis.get_helper()._extremes = -180, 90
# A parasite axes with given transform
ax2 = ParasiteAxesAuxTrans(ax1, tr, "equal")
assert ax2.transData == tr + ax1.transData
# Anything you draw in ax2 will match the ticks and grids of ax1.
ax1.parasites.append(ax2)
ax2.plot(np.linspace(0, 30, 50), np.linspace(10, 10, 50))
ax1.set_aspect(1.)
ax1.set_xlim(-5, 12)
ax1.set_ylim(-5, 10)
ax1.grid(True)
def curvelinear_test2(fig):
"""
polar projection, but in a rectangular box.
"""
global ax1
import numpy as np
import mpl_toolkits.axisartist.angle_helper as angle_helper
from matplotlib.projections import PolarAxes
from matplotlib.transforms import Affine2D
from mpl_toolkits.axisartist import SubplotHost
from mpl_toolkits.axisartist import GridHelperCurveLinear
# see demo_curvelinear_grid.py for details
tr = Affine2D().scale(np.pi/180., 1.) + PolarAxes.PolarTransform()
extreme_finder = angle_helper.ExtremeFinderCycle(20, 20,
lon_cycle = 360,
lat_cycle = None,
lon_minmax = None,
lat_minmax = (0, np.inf),
)
grid_locator1 = angle_helper.LocatorDMS(12)
tick_formatter1 = angle_helper.FormatterDMS()
grid_helper = GridHelperCurveLinear(tr,
extreme_finder=extreme_finder,
grid_locator1=grid_locator1,
tick_formatter1=tick_formatter1
)
ax1 = SubplotHost(fig, 1, 1, 1, grid_helper=grid_helper)
fig.add_subplot(ax1)
# Now creates floating axis
#grid_helper = ax1.get_grid_helper()
# floating axis whose first coordinate (theta) is fixed at 60
ax1.axis["lat"] = axis = ax1.new_floating_axis(0, 60)
axis.label.set_text(r"$\theta = 60^{\circ}$")
axis.label.set_visible(True)
# floating axis whose second coordinate (r) is fixed at 6
ax1.axis["lon"] = axis = ax1.new_floating_axis(1, 6)
axis.label.set_text(r"$r = 6$")
ax1.set_aspect(1.)
ax1.set_xlim(-5, 12)
ax1.set_ylim(-5, 10)
ax1.grid(True)
def curvelinear_test2(fig):
"""
Polar projection, but in a rectangular box.
"""
# PolarAxes.PolarTransform takes radian. However, we want our coordinate
# system in degree
tr = Affine2D().scale(np.pi/180, 1) + PolarAxes.PolarTransform()
# Polar projection, which involves cycle, and also has limits in
# its coordinates, needs a special method to find the extremes
# (min, max of the coordinate within the view).
extreme_finder = angle_helper.ExtremeFinderCycle(
nx=20, ny=20, # Number of sampling points in each direction.
lon_cycle=360, lat_cycle=None,
lon_minmax=None, lat_minmax=(0, np.inf),
)
# Find grid values appropriate for the coordinate (degree, minute, second).
grid_locator1 = angle_helper.LocatorDMS(12)
# Use an appropriate formatter. Note that the acceptable Locator and
# Formatter classes are a bit different than that of Matplotlib, which
# cannot directly be used here (this may be possible in the future).
tick_formatter1 = angle_helper.FormatterDMS()
grid_helper = GridHelperCurveLinear(
tr, extreme_finder=extreme_finder,
grid_locator1=grid_locator1, tick_formatter1=tick_formatter1)
ax1 = SubplotHost(fig, 1, 2, 2, grid_helper=grid_helper)
# make ticklabels of right and top axis visible.
ax1.axis["right"].major_ticklabels.set_visible(True)
ax1.axis["top"].major_ticklabels.set_visible(True)
# let right axis shows ticklabels for 1st coordinate (angle)
ax1.axis["right"].get_helper().nth_coord_ticks = 0
# let bottom axis shows ticklabels for 2nd coordinate (radius)
ax1.axis["bottom"].get_helper().nth_coord_ticks = 1
fig.add_subplot(ax1)
ax1.set_aspect(1)
ax1.set_xlim(-5, 12)
ax1.set_ylim(-5, 10)
ax1.grid(True, zorder=0)
# A parasite axes with given transform
ax2 = ParasiteAxesAuxTrans(ax1, tr, "equal")
# note that ax2.transData == tr + ax1.transData
# Anything you draw in ax2 will match the ticks and grids of ax1.
ax1.parasites.append(ax2)
ax2.plot(np.linspace(0, 30, 51), np.linspace(10, 10, 51), linewidth=2)
def curvelinear_test(fig):
"""Polar projection, but in a rectangular box.
"""
# 创建一个极坐标变换。PolarAxes.PolarTransform使用弧度，但本例
# 要设置的坐标系中角度的单位为度
tr = Affine2D().scale(np.pi / 180., 1.) + PolarAxes.PolarTransform()
# 极坐标投影涉及到周期，在坐标上也有限制，需要一种特殊的方法来找到
# 坐标的最小值和最大值
extreme_finder = angle_helper.ExtremeFinderCycle(
20,
20,
lon_cycle=360,
lat_cycle=None,
lon_minmax=None,
lat_minmax=(0, np.inf),
)
# 找到适合坐标的网格值（度、分、秒）
grid_locator1 = angle_helper.LocatorDMS(12)
# 使用适当的Formatter。请注意，可接受的Locator和Formatter类
# 与Matplotlib中的相应类稍有不同，后者目前还不能直接在这里使用
tick_formatter1 = angle_helper.FormatterDMS()
grid_helper = GridHelperCurveLinear(tr,
extreme_finder=extreme_finder,
grid_locator1=grid_locator1,
tick_formatter1=tick_formatter1)
ax1 = SubplotHost(fig, 1, 1, 1, grid_helper=grid_helper)
fig.add_subplot(ax1)
# 创建浮动坐标轴
# 浮动坐标轴的第一个坐标（theta）指定为60度
ax1.axis["lat"] = axis = ax1.new_floating_axis(0, 60)
axis.label.set_text(r"$\theta = 60^{\circ}$")
axis.label.set_visible(True)
# 浮动坐标轴的第二个坐标（r）指定为6
ax1.axis["lon"] = axis = ax1.new_floating_axis(1, 6)
axis.label.set_text(r"$r = 6$")
ax1.set_aspect(1.)
ax1.set_xlim(-5, 12)
ax1.set_ylim(-5, 10)
ax1.grid(True)
def SemiPolarPlot(fig):
# see demo_curvelinear_grid.py for details
tr = Affine2D().scale(pi/180., 1.) + PolarAxes.PolarTransform()
extreme_finder = angle_helper.ExtremeFinderCycle(20, 20,
lon_cycle = 360,
lat_cycle = None,
lon_minmax = None,
lat_minmax = (0, 1),
)
grid_locator1 = angle_helper.LocatorDMS(11)
grid_locator2 = FixedLocator([0.25, 0.5, 1., 0.75])
tick_formatter1 = angle_helper.FormatterDMS()
grid_helper = GridHelperCurveLinear(tr,
extreme_finder=extreme_finder,
grid_locator1=grid_locator1,
grid_locator2=grid_locator2,
tick_formatter1=tick_formatter1,
tick_formatter2=None
)
ax1 = SubplotHost(fig, 1, 1, 1, grid_helper=grid_helper)
fig.add_subplot(ax1)
ax1.axis["top"].set_visible(False)
ax1.axis["right"].set_visible(False)
ax1.axis["bottom"].set_visible(False)
ax1.axis["lon"] = ax1.new_floating_axis(1, 1)
ax1.set_aspect(1)
ax1.set_xlim(0, 2)
ax1.set_ylim(-1., 1.)
ax1.grid(True)
curved_ax = ax1.get_aux_axes(tr)
curved_ax.patch = ax1.patch # for aux_ax to have a clip path as in ax
ax1.patch.zorder=0.9
return ax1, curved_ax
def curvelinear_test2(fig):
"""
polar projection, but in a rectangular box.
"""
# PolarAxes.PolarTransform takes radian. However, we want our coordinate
# system in degree
tr = Affine2D().scale(np.pi/180., 1.) + PolarAxes.PolarTransform()
# polar projection, which involves cycle, and also has limits in
# its coordinates, needs a special method to find the extremes
# (min, max of the coordinate within the view).
# 20, 20 : number of sampling points along x, y direction
extreme_finder = angle_helper.ExtremeFinderCycle(20, 20,
lon_cycle=360,
lat_cycle=None,
lon_minmax=None,
lat_minmax=(0, np.inf),
)
grid_locator1 = angle_helper.LocatorDMS(12)
# Find a grid values appropriate for the coordinate (degree,
# minute, second).
tick_formatter1 = angle_helper.FormatterDMS()
# And also uses an appropriate formatter. Note that,the
# acceptable Locator and Formatter class is a bit different than
# that of mpl's, and you cannot directly use mpl's Locator and
# Formatter here (but may be possible in the future).
grid_helper = GridHelperCurveLinear(tr,
extreme_finder=extreme_finder,
grid_locator1=grid_locator1,
tick_formatter1=tick_formatter1
)
ax1 = SubplotHost(fig, 1, 2, 2, grid_helper=grid_helper)
# make ticklabels of right and top axis visible.
ax1.axis["right"].major_ticklabels.set_visible(True)
ax1.axis["top"].major_ticklabels.set_visible(True)
# let right axis shows ticklabels for 1st coordinate (angle)
ax1.axis["right"].get_helper().nth_coord_ticks = 0
# let bottom axis shows ticklabels for 2nd coordinate (radius)
ax1.axis["bottom"].get_helper().nth_coord_ticks = 1
fig.add_subplot(ax1)
# A parasite axes with given transform
ax2 = ParasiteAxesAuxTrans(ax1, tr, "equal")
# note that ax2.transData == tr + ax1.transData
# Anything you draw in ax2 will match the ticks and grids of ax1.
ax1.parasites.append(ax2)
intp = cbook.simple_linear_interpolation
ax2.plot(intp(np.array([0, 30]), 50),
intp(np.array([10., 10.]), 50),
linewidth=2.0)
ax1.set_aspect(1.)
ax1.set_xlim(-5, 12)
ax1.set_ylim(-5, 10)
ax1.grid(True, zorder=0)
def plotGsrResidue(theta, phi, residue, optTheta, optPhi, mvabTheta=None, mvabPhi=None, mvubTheta=None, mvubPhi=None):
fig = figure()
fig.clf()
# some matplotlib setup stuff which I don't fully understand but it works
tr = Affine2D().scale(pi/180., 1.) + PolarAxes.PolarTransform()
extreme_finder = angle_helper.ExtremeFinderCycle(20, 20,
lon_cycle = 360,
lat_cycle = None,
lon_minmax = None,
lat_minmax = (0, inf),
)
grid_locator1 = angle_helper.LocatorDMS(12)
tick_formatter1 = angle_helper.FormatterDMS()
grid_helper = GridHelperCurveLinear(tr,
extreme_finder=extreme_finder,
grid_locator1=grid_locator1,
tick_formatter1=tick_formatter1
)
ax1 = SubplotHost(fig, 1, 1, 1, grid_helper=grid_helper)
fig.add_subplot(ax1)
ax1.axis["right"].major_ticklabels.set_visible(True)
ax1.axis["top"].major_ticklabels.set_visible(True)
ax1.axis["right"].get_helper().nth_coord_ticks=0
ax1.axis["bottom"].get_helper().nth_coord_ticks=1
# draw the filled contoured map in polar coordinates
ax1.contour(transpose(mat(theta))*mat(cos(phi*pi/180)), transpose(mat(theta))*mat(sin(phi*pi/180)), 1/transpose(reshape(residue, (phi.size,-1))), 100, lw=0.1)
cc = ax1.contourf(transpose(mat(theta))*mat(cos(phi*pi/180)), transpose(mat(theta))*mat(sin(phi*pi/180)), 1/transpose(reshape(residue, (phi.size,-1))), 100)
# remove gaps between the contour lines
for c in cc.collections:
c.set_antialiased(False)
# show the MVAB direction
if mvabTheta is not None and mvabPhi is not None:
ax1.plot(mvabTheta*cos(mvabPhi*pi/180), mvabTheta*sin(mvabPhi*pi/180), 'sk', markersize=8)
# show the MVUB direction
if mvubTheta is not None and mvubPhi is not None:
ax1.plot(mvubTheta*cos(mvubPhi*pi/180), mvubTheta*sin(mvubPhi*pi/180), 'dk', markersize=8)
# show the optimal direction
ax1.plot(optTheta*cos(optPhi*pi/180), optTheta*sin(optPhi*pi/180), '.k', markersize=15)
# aspect and initial axes limits
ax1.set_aspect(1.)
ax1.set_xlim(-90, 90)
ax1.set_ylim(-90, 90)
# add grid
ax1.grid(True)
# add colobar
cb = colorbar(cc, pad=0.07)
cb.locator = MaxNLocator(14)
cb.update_ticks()
cb.set_label(r"$1/\tilde{\mathcal{R}}$")
# save
if toSave:
savefig(resultsDir+'/eps/gsr_ResidualMap.eps', format='eps')
savefig(resultsDir+'/png/gsr_ResidualMap.png', format='png')
def createQEAxes(DataSet=None,axis=0,figure = None, projectionVector1 = None, projectionVector2 = None):
"""Function to create Q E plot
Kwargs:
- DataSet (DataSet): If provided and no projections vectors creates QE axis for main direction (default None)
- axis (int): Whether to create axis 0 or 1 (projection vector 0 or orthogonal to this, default 0)
- figure (figure): If provided, this is used to create the axis within (default None)
- projectionVector1 (vec): Projection vector along which data is plotted. If not provided sample vector is used (default None)
- projectionVector2 (vec): Projection vector orthogonal to data. If not provided sample vector is used (default None)
"""
if projectionVector1 is None or projectionVector2 is None:
v1 = DataSet.sample[0].projectionVector1
v2 = DataSet.sample[0].projectionVector2
angle = DataSet.sample[0].projectionAngle
orientationMatrix = DataSet.sample[0].orientationMatrix
else:
v1 = np.array(projectionVector1)
v2 = np.array(projectionVector2)
if not np.all([x.shape==(3,) for x in [v1,v2]]) or not np.all([len(x.shape)==1 for x in [v1,v2]]):
raise AttributeError('Provided vector(s) is not 3D: projectionVector1.shape={} or projectionVector2.shape={}'.format(v1.shape,v2.shape))
angle = np.arccos(np.dot(v1,v2)/(np.linalg.norm(v1)*np.linalg.norm(v2)))
orientationMatrix = np.ones(3)
sample = copy.deepcopy(DataSet.sample)
v1,v2 = sample[0].projectionVector1,sample[0].projectionVector2
angle = np.sign(np.dot(np.cross(v1,v2),sample[0].planeNormal))*sample[0].projectionAngle
v2Length = np.linalg.norm(v2)/np.linalg.norm(v1)
projectionMatrix = np.linalg.inv(np.array([[1,0],[np.cos(angle)*v2Length,np.sin(angle)*v2Length]]).T)
projectionVectorQX = np.dot(np.dot(projectionMatrix,[1,0]),np.array([v1,v2]))
projectionVectorQY = np.dot(np.dot(projectionMatrix,[0,1]),np.array([v1,v2]))
projectionVectorQX = _tools.LengthOrder(projectionVectorQX)
projectionVectorQY = _tools.LengthOrder(projectionVectorQY)
projectionVectorQXLength = np.linalg.norm(np.dot(orientationMatrix,projectionVectorQY))
projectionVectorQYLength = np.linalg.norm(np.dot(orientationMatrix,projectionVectorQX))
projectionVectorQXFormated = ', '.join(['{:.3f}'.format(x) for x in projectionVectorQX])
projectionVectorQYFormated = ', '.join(['{:.3f}'.format(x) for x in projectionVectorQY])
if axis == 0:
projectionVectorLength = projectionVectorQYLength
projectionVectorLengthORthogonal = projectionVectorQXLength
projectionVectorFormated = projectionVectorQXFormated
projectionVector = projectionVectorQX
projectionVectorOrthogonal = projectionVectorQY
elif axis == 1:
projectionVectorLength = projectionVectorQXLength
projectionVectorFormated = projectionVectorQYFormated
projectionVectorLengthORthogonal = projectionVectorQYLength
projectionVector = projectionVectorQY
projectionVectorOrthogonal = projectionVectorQX
else:
raise AttributeError('Provided axis of {} is not allowed. Should be either 0 or 1.'.format(axis))
if figure is None:
figure = plt.figure(figsize=(7, 4))
else:
figure.clf()
def inv_tr(l,x,y):
return x*l,y
def tr(l,x,y):
return x/l,y
if pythonVersion == 3:
grid_locator1 = MultipleLocator(base=1.0) # Standard X ticks is multiple locator
grid_helper = GridHelperCurveLinear((lambda x,y:inv_tr(projectionVectorLength,x,y),
lambda x,y:tr(projectionVectorLength,x,y)),grid_locator1=grid_locator1)
else:
grid_helper = GridHelperCurveLinear((lambda x,y:inv_tr(projectionVectorLength,x,y),
lambda x,y:tr(projectionVectorLength,x,y)))
ax = SubplotHost(figure, 1, 1, 1, grid_helper=grid_helper)
ax.sample = sample[0]
figure.add_subplot(ax)
#ax.set_aspect(1.)
ax.grid(True, zorder=0)
def calculateRLU(l,v1,x,y,v,step):
return np.asarray(x)/l*v1+v*step, np.asarray(y)
def format_coord(x,y): # pragma: no cover # x is H,K,L and y is energy
xformated = ', '.join(['{} = {}'.format(Y[0],Y[1]) for Y in zip(['h','k','l'],['{:.4f}'.format(X) for X in x])])
return '{}, E={:.4f}'.format(xformated,y)
ax.set_xlabel('{} [RLU]'.format(projectionVectorFormated))
ax.set_ylabel('E [meV]')
ax._length = projectionVectorLengthORthogonal
ax._projectionVector = projectionVector
ax._projectionVectorOrthogonal = projectionVectorOrthogonal
ax._step = 0.0
ax.calculateRLU = lambda x,y: calculateRLU(projectionVectorLength,ax._projectionVector,x,y,ax._projectionVectorOrthogonal,ax._step)
ax.format_coord = lambda x,y: format_coord(*ax.calculateRLU(x,y))
if pythonVersion == 3:
ax.forceGridUpdate = lambda:forceGridUpdate(ax)
ax.xticks = 7
def xAxisChanged(axis, forceUpdate=False):
locator = axis._grid_helper.grid_finder.grid_locator1
xlim = axis.get_xlim()
xlimDiff = np.diff(xlim)
if isinstance(locator,MultipleLocator):
if hasattr(axis,'xBase'):
base = axis.xBase
else:
base = calculateBase(locator,xlimDiff,axis.xticks)
locator.set_params(base=base)
elif isinstance(locator,MaxNLocator):
if hasattr(axis,'xTicks'):
ticks = getattr(axis,'xTicks')
else:
ticks = 7
locator.set_params(nbins = ticks)
else:
return
axis.forceGridUpdate()
ax.callbacks.connect('xlim_changed', xAxisChanged)
ax.callbacks.connect('draw_event',lambda ax: xAxisChanged(ax,forceUpdate=True))
ax.xAxisChanged = lambda: xAxisChanged(ax,forceUpdate=True)
@updateXAxisDecorator(ax=ax)
def set_xticks_base(xBase=None,ax=ax):
"""Setter of the base x ticks to be used for plotting
Kwargs:
- xBase (float): Base of the tick marks (default automatic)
"""
if not isinstance(ax._grid_helper.grid_finder.grid_locator1,MultipleLocator):
l1 = MultipleLocator(base=xBase)
ax._grid_helper.update_grid_finder(grid_locator1=l1)
if xBase is None:
if hasattr(ax,'xBase'):
delattr(ax,'xBase')
else:
ax.xBase = xBase
@updateXAxisDecorator(ax=ax)
def set_xticks_number(xNumber = None,ax=ax):
"""Setter of the number of x ticks to be used for plotting
Kwargs:
- xNumber (int): Number of x tick marks (default 7)
"""
if xNumber is None:
xNumber = 7
if not isinstance(ax._grid_helper.grid_finder.grid_locator1,MaxNLocator):
l1 = MaxNLocator(nbins=xNumber)
ax._grid_helper.update_grid_finder(grid_locator1=l1)
ax.xTicks = xNumber
ax.set_xticks_base = set_xticks_base
ax.set_xticks_number = set_xticks_number
return ax
def createRLUAxes(self,figure=None,ids=[1, 1, 1],basex=None,basey=None):
"""Create a reciprocal lattice plot for a given DataSet object.
Args:
- Dataset (DataSet): DataSet object for which the RLU plot is to be made.
Kwargs:
- figure: Matplotlib figure in which the axis is to be put (default None)
- ids (array): List of integer numbers provided to the SubplotHost ids attribute (default [1,1,1])
- basex (float): Ticks are positioned at multiples of this value along x (default None)
- basey (float): Ticks are positioned at multiples of this value along y (default None)
Returns:
- ax (Matplotlib axes): Axes containing the RLU plot.
.. note::
When rlu axis is created, the orientation of Qx and Qy is assumed to be rotated as well.
This is to be done in the self.View3D method call!
.. note::
When using python 2 the changing of tick marks is not supported due to limitations in matplotlib. However, if python 3 is used, the number
of ticks and their location can be change after the initialization using the set_xticks_number, set_yticks_number chaning the wanted number
of tick marks, or the set_xticks_base or set_yticks_base to change the base number, see RLU tutorial under Tools. As default a sufficient base
number is found and will update when zooming.
"""
sample = copy.deepcopy(self.sample)
for samp in sample:
samp.convert = np.einsum('ij,j...->i...',samp.RotMat,samp.convert)
#sample.convert = np.einsum('ij,j...->i...',sample.RotMat,sample.convert)
samp.convertinv = np.linalg.inv(samp.convert) # Convert from Qx, Qy to projX, projY
samp.orientationMatrix = np.dot(samp.RotMat3D,samp.orientationMatrix)
samp.orientationMatrixINV = np.linalg.inv(samp.orientationMatrix)
samp.theta = 0.0
if figure is None:
fig = plt.figure(figsize=(7, 4))
else:
fig = figure
def calculateTicks(ticks,angle,round=True):
val = ticks/np.tan(angle/2.0)
if round:
return np.array(np.round(val),dtype=int)
else:
return val
if pythonVersion==3: # Only for python 3
if not basex is None or not basey is None: # Either basex or basey is provided (or both)
if basex is None:
basex = calculateTicks(basey,sample[0].projectionAngle,round=False)
elif basey is None:
basey = basex/calculateTicks(1.0,sample[0].projectionAngle,round=False)
grid_locator1 = MultipleLocator(base=basex)
grid_locator2 = MultipleLocator(base=basey)
else:
basex = 0.5
basey = 0.5
grid_locator1 = MultipleLocator(base=basex)
grid_locator2 = MultipleLocator(base=basey)
grid_helper = GridHelperCurveLinear((sample[0].inv_tr, sample[0].tr),grid_locator1=grid_locator1,grid_locator2=grid_locator2)
else: # Python 2
grid_helper = GridHelperCurveLinear((sample[0].inv_tr, sample[0].tr))
ax = SubplotHost(fig, *ids, grid_helper=grid_helper)
ax.sample = sample[0]
if pythonVersion==3: # Only for python 3
ax.basex = basex
ax.basey = basey
def set_axis(ax,v1,v2,*args):
if not args is ():
points = np.concatenate([[v1,v2],[x for x in args]],axis=0)
else:
points = np.array([v1,v2])
if points.shape[1] == 3:
points = ax.sample.calculateHKLtoProjection(points[:,0],points[:,1],points[:,2]).T
boundaries = np.array([ax.sample.inv_tr(x[0],x[1]) for x in points])
ax.set_xlim(boundaries[:,0].min(),boundaries[:,0].max())
ax.set_ylim(boundaries[:,1].min(),boundaries[:,1].max())
if pythonVersion == 3: # Only possible in python 3
ax.forceGridUpdate()
fig.add_subplot(ax)
ax.set_aspect(1.)
ax.grid(True, zorder=0)
if not np.isclose(ax.sample.projectionAngle,np.pi/2.0,atol=0.001):
ax.axis["top"].major_ticklabels.set_visible(True)
ax.axis["right"].major_ticklabels.set_visible(True)
ax.format_coord = ax.sample.format_coord
ax.set_axis = lambda v1,v2,*args: set_axis(ax,v1,v2,*args)
def beautifyLabel(vec):
Vec = [x.astype(int) if np.isclose(x.astype(float)-x.astype(int),0.0) else x.astype(float) for x in vec]
return '{} [RLU]'.format(', '.join([str(x) for x in Vec]))
ax.set_xlabel(beautifyLabel(ax.sample.projectionVector1))
ax.set_ylabel(beautifyLabel(ax.sample.projectionVector2))
if pythonVersion==3: # Only for python 3
ax.calculateTicks = lambda value:calculateTicks(value,ax.sample.projectionAngle)
ax.forceGridUpdate = lambda:forceGridUpdate(ax)
ax._oldXlimDiff = np.diff(ax.get_xlim())
ax._oldYlimDiff = np.diff(ax.get_ylim())
ax.get_aspect_ratio = lambda: get_aspect(ax)
ax.callbacks.connect('xlim_changed', axisChanged)
ax.callbacks.connect('ylim_changed', axisChanged)
ax.callbacks.connect('draw_event',lambda ax: axisChanged(ax,forceUpdate=True))
ax.axisChanged = lambda direction='both': axisChanged(ax,forceUpdate=True,direction=direction)
@updateAxisDecorator(ax=ax,direction='x')
def set_xticks_base(xBase,ax=ax):
"""Setter of the base x ticks to be used for plotting
Args:
- xBase (float): Base of the tick marks
"""
if not isinstance(ax._grid_helper.grid_finder.grid_locator1,MultipleLocator):
l1 = MultipleLocator(base=xBase)
ax._grid_helper.update_grid_finder(grid_locator1=l1)
ax.xbase = xBase
@updateAxisDecorator(ax=ax,direction='y')
def set_yticks_base(yBase,ax=ax):
"""Setter of the base y ticks to be used for plotting
Args:
- yBase (float): Base of the tick marks
"""
if not isinstance(ax._grid_helper.grid_finder.grid_locator2,MultipleLocator):
l2 = MultipleLocator(base=yBase)
ax._grid_helper.update_grid_finder(grid_locator2=l2)
ax.ybase = yBase
@updateAxisDecorator(ax=ax,direction='x')
def set_xticks_number(xNumber,ax=ax):
"""Setter of the number of x ticks to be used for plotting
Args:
- xNumber (int): Number of x tick marks
"""
if not isinstance(ax._grid_helper.grid_finder.grid_locator1,MaxNLocator):
l1 = MaxNLocator(nbins=xNumber)
ax._grid_helper.update_grid_finder(grid_locator1=l1)
ax.xticks = xNumber
@updateAxisDecorator(ax=ax,direction='y')
def set_yticks_number(yNumber,ax=ax):
"""Setter of the number of y ticks to be used for plotting
Args:
- yNumber (int): Number of y tick marks
"""
if not isinstance(ax._grid_helper.grid_finder.grid_locator2,MaxNLocator):
l2 = MaxNLocator(nbins=yNumber)
ax._grid_helper.update_grid_finder(grid_locator2=l2)
ax.yticks = yNumber
ax.set_xticks_base = set_xticks_base
ax.set_yticks_base = set_yticks_base
ax.set_xticks_number = set_xticks_number
ax.set_yticks_number = set_yticks_number
return ax
def curvelinear_test2(fig):
"""
polar projection, but in a rectangular box.
"""
# PolarAxes.PolarTransform takes radian. However, we want our coordinate
# system in degree
tr = Affine2D().scale(np.pi / 180., 1.) + PolarAxes.PolarTransform()
# polar projection, which involves cycle, and also has limits in
# its coordinates, needs a special method to find the extremes
# (min, max of the coordinate within the view).
# 20, 20 : number of sampling points along x, y direction
extreme_finder = angle_helper.ExtremeFinderCycle(
20,
20,
lon_cycle=360,
lat_cycle=None,
lon_minmax=None,
lat_minmax=(0, np.inf),
)
grid_locator1 = angle_helper.LocatorDMS(12)
# Find a grid values appropriate for the coordinate (degree,
# minute, second).
tick_formatter1 = angle_helper.FormatterDMS()
# And also uses an appropriate formatter. Note that,the
# acceptable Locator and Formatter class is a bit different than
# that of mpl's, and you cannot directly use mpl's Locator and
# Formatter here (but may be possible in the future).
grid_helper = GridHelperCurveLinear(tr,
extreme_finder=extreme_finder,
grid_locator1=grid_locator1,
tick_formatter1=tick_formatter1)
ax1 = SubplotHost(fig, 1, 2, 2, grid_helper=grid_helper)
# make ticklabels of right and top axis visible.
ax1.axis["right"].major_ticklabels.set_visible(True)
ax1.axis["top"].major_ticklabels.set_visible(True)
# let right axis shows ticklabels for 1st coordinate (angle)
ax1.axis["right"].get_helper().nth_coord_ticks = 0
# let bottom axis shows ticklabels for 2nd coordinate (radius)
ax1.axis["bottom"].get_helper().nth_coord_ticks = 1
fig.add_subplot(ax1)
# A parasite axes with given transform
ax2 = ParasiteAxesAuxTrans(ax1, tr, "equal")
# note that ax2.transData == tr + ax1.transData
# Anthing you draw in ax2 will match the ticks and grids of ax1.
ax1.parasites.append(ax2)
intp = cbook.simple_linear_interpolation
ax2.plot(intp(np.array([0, 30]), 50),
intp(np.array([10., 10.]), 50),
linewidth=2.0)
ax1.set_aspect(1.)
ax1.set_xlim(-5, 12)
ax1.set_ylim(-5, 10)
ax1.grid(True, zorder=0)
def curvelinear_test2(fig, gs=None, xcenter=0.0, ycenter=17.3, xwidth=1.5, ywidth=1.5,
rot_angle=0.0, xlabel=xlabel, ylabel=ylabel, xgrid_density=8, ygrid_density=5):
"""
polar projection, but in a rectangular box.
"""
tr = Affine2D().translate(0,90)
tr += Affine2D().scale(np.pi/180., 1.)
tr += PolarAxes.PolarTransform()
tr += Affine2D().rotate(rot_angle) # This rotates the grid
extreme_finder = angle_helper.ExtremeFinderCycle(10, 60,
lon_cycle = 360,
lat_cycle = None,
lon_minmax = None,
lat_minmax = (-90, np.inf),
)
grid_locator1 = angle_helper.LocatorHMS(xgrid_density) #changes theta gridline count
tick_formatter1 = angle_helper.FormatterHMS()
grid_locator2 = angle_helper.LocatorDMS(ygrid_density) #changes theta gridline count
tick_formatter2 = angle_helper.FormatterDMS()
grid_helper = GridHelperCurveLinear(tr,
extreme_finder=extreme_finder,
grid_locator1=grid_locator1,
grid_locator2=grid_locator2,
tick_formatter1=tick_formatter1,
tick_formatter2=tick_formatter2
)
# ax1 = SubplotHost(fig, rect, grid_helper=grid_helper)
if gs is None:
ax1 = SubplotHost(fig, 111, grid_helper=grid_helper)
else:
ax1 = SubplotHost(fig, gs, grid_helper=grid_helper)
# make ticklabels of right and top axis visible.
ax1.axis["right"].major_ticklabels.set_visible(False)
ax1.axis["top"].major_ticklabels.set_visible(False)
ax1.axis["bottom"].major_ticklabels.set_visible(True) #Turn off?
# let right and bottom axis show ticklabels for 1st coordinate (angle)
ax1.axis["right"].get_helper().nth_coord_ticks=0
ax1.axis["bottom"].get_helper().nth_coord_ticks=0
fig.add_subplot(ax1)
grid_helper = ax1.get_grid_helper()
# These move the grid
ax1.set_xlim(xcenter-xwidth, xcenter+xwidth) # moves the origin left-right in ax1
ax1.set_ylim(ycenter-ywidth, ycenter+ywidth) # moves the origin up-down
if xlabel is not None: ax1.set_xlabel(xlabel)
if ylabel is not None: ax1.set_ylabel(ylabel)
ax1.grid(True, linestyle='-')
return ax1,tr
def curvelinear_test2(fig, gs=None, xcenter=0.0, ycenter=17.3, xwidth=1.5, ywidth=1.5,
xlabel=xlabel, ylabel=ylabel, xgrid_density=8, ygrid_density=5):
"""
polar projection, but in a rectangular box.
"""
tr = Affine2D().translate(0,90)
tr += Affine2D().scale(np.pi/180., 1.)
tr += PolarAxes.PolarTransform()
tr += Affine2D().rotate(1.34) # This rotates the grid
extreme_finder = angle_helper.ExtremeFinderCycle(10, 60,
lon_cycle = 360,
lat_cycle = None,
lon_minmax = None,
lat_minmax = (-90, np.inf),
)
grid_locator1 = angle_helper.LocatorHMS(xgrid_density) #changes theta gridline count
tick_formatter1 = angle_helper.FormatterHMS()
grid_locator2 = angle_helper.LocatorDMS(ygrid_density) #changes theta gridline count
tick_formatter2 = angle_helper.FormatterDMS()
grid_helper = GridHelperCurveLinear(tr,
extreme_finder=extreme_finder,
grid_locator1=grid_locator1,
grid_locator2=grid_locator2,
tick_formatter1=tick_formatter1,
tick_formatter2=tick_formatter2
)
# ax1 = SubplotHost(fig, rect, grid_helper=grid_helper)
if gs is None:
ax1 = SubplotHost(fig, 111, grid_helper=grid_helper)
else:
ax1 = SubplotHost(fig, gs, grid_helper=grid_helper)
# make ticklabels of right and top axis visible.
ax1.axis["right"].major_ticklabels.set_visible(False)
ax1.axis["top"].major_ticklabels.set_visible(False)
ax1.axis["bottom"].major_ticklabels.set_visible(True) #Turn off?
# let right and bottom axis show ticklabels for 1st coordinate (angle)
ax1.axis["right"].get_helper().nth_coord_ticks=0
ax1.axis["bottom"].get_helper().nth_coord_ticks=0
fig.add_subplot(ax1)
grid_helper = ax1.get_grid_helper()
# These move the grid
ax1.set_xlim(xcenter-xwidth, xcenter+xwidth) # moves the origin left-right in ax1
ax1.set_ylim(ycenter-ywidth, ycenter+ywidth) # moves the origin up-down
# ax1.set_xlim(-1.5, 1.4)
# ax1.set_ylim(15.8, 18.8)
if xlabel is not None:
ax1.set_xlabel(xlabel)
if ylabel is not None:
ax1.set_ylabel(ylabel)
# ax1.set_ylabel('Declination')
# ax1.set_xlabel('Right Ascension')
ax1.grid(True, linestyle='-')
#ax1.grid(linestyle='--', which='x') # either keyword applies to both
#ax1.grid(linestyle=':', which='y') # sets of gridlines
return ax1,tr
class PolarPlot:
''' plots heading angle and signal strength in polar coor in 2d'''
def __init__(self):
plt.ion()
self.fig = plt.figure(num=2, figsize=(10,7))
tr = Affine2D().scale(np.pi/180., 1.) + PolarAxes.PolarTransform()
# 20, 20 : number of sampling points along x, y direction
extreme_finder = angle_helper.ExtremeFinderCycle(50, 50,
lon_cycle = 360,
lat_cycle = None,
lon_minmax = None,
lat_minmax = (0, np.inf),
)
grid_locator1 = angle_helper.LocatorDMS(15)
tick_formatter1 = angle_helper.FormatterDMS()
# And also uses an appropriate formatter. Note that,the
# acceptable Locator and Formatter class is a bit different than
# that of mpl's, and you cannot directly use mpl's Locator and
# Formatter here (but may be possible in the future).
grid_helper = GridHelperCurveLinear(tr,
extreme_finder=extreme_finder,
grid_locator1=grid_locator1,
tick_formatter1=tick_formatter1
)
self.ax1 = SubplotHost(self.fig, 1, 1, 1, grid_helper=grid_helper)
# make ticklabels of right and top axis visible.
self.ax1.axis["right"].major_ticklabels.set_visible(True)
self.ax1.axis["top"].major_ticklabels.set_visible(True)
self.ax1.axis["left"].major_ticklabels.set_visible(True)
# let right axis shows ticklabels for 1st coordinate (angle)
self.ax1.axis["right"].get_helper().nth_coord_ticks=0
# let bottom axis shows ticklabels for 1st coordinate (angle)
self.ax1.axis["bottom"].get_helper().nth_coord_ticks=0
self.ax1.axis["left"].get_helper().nth_coord_ticks=0
temp = self.ax1.set_title('Signal strength & heading polar plots')
temp.set_y(1.05)
self.ax1.grid(True)
# insert x and y axises
self.ax = self.fig.add_subplot(self.ax1)
self.ax1.spines['left'].set_position('center')
self.ax1.spines['right'].set_color('red')
self.ax1.spines['bottom'].set_position('center')
self.ax1.spines['top'].set_color('none')
self.ax1.spines['left'].set_smart_bounds(True)
self.ax1.spines['bottom'].set_smart_bounds(True)
self.ax1.xaxis.set_ticks_position('bottom')
self.ax1.yaxis.set_ticks_position('left')
self.ax1.axhline(linewidth=2, color='blue')
self.ax1.axvline(linewidth=2, color='blue')
# label x and y axises manually
ticks = np.linspace(0, 255, 6)
offset = np.zeros([1,255])
for i in range(1,5):
self.ax1.annotate(str(ticks[i]),size=10, xy=(ticks[i], -15))
blah = self.ax1.plot(ticks[i],0, 'bo')
self.ax1.annotate(str(ticks[i]),size=10, xy=(5, ticks[i]))
blah = self.ax1.plot(0,ticks[i], 'bo')
# annotate figure
bbox_props = dict(boxstyle="round", fc="w", ec="0.5", alpha=0.9)
# self.annotation = self.ax1.annotate('init',size=20, xy=(100, 100), bbox = bbox_props)
self.annotation = plt.figtext(0.02, 0.9, 'rssi = ', size=20, alpha = 0.9, bbox = bbox_props)
self.Freq = plt.figtext(0.85, 0.85, 'freq = ???', size=10, alpha = 0.9, bbox = bbox_props)
self.Freq = plt.figtext(0.85, 0.9, 'Horizontal Plane', size=10, alpha = 0.9, bbox = bbox_props)
# initialize arrow
self.quiverLine = self.ax1.quiver(0,0,50,50,angles='xy',scale_units='xy',scale=1)
self.ax1.set_aspect(1.)
self.ax1.set_xlim(-255, 255)
self.ax1.set_ylim(-255, 255)
# initialize mesh plot
self.xdata = []
self.ydata = []
self.polarline, = self.ax1.plot(self.xdata,self.ydata)
def update(self, signalStrength, yaw):
U = signalStrength*cos(yaw*pi/180)
V = signalStrength*sin(yaw*pi/180)
self.xdata.append(U)
self.ydata.append(V)
self.polarline.set_data(self.xdata,self.ydata)
self.quiverLine.set_UVC(U,V)
self.annotation.set_text('rssi = ' + str(signalStrength))
plt.draw()
def plotGsrResidue(theta,
phi,
residue,
optTheta,
optPhi,
mvabTheta=None,
mvabPhi=None,
mvubTheta=None,
mvubPhi=None):
fig = figure()
fig.clf()
# some matplotlib setup stuff which I don't fully understand but it works
tr = Affine2D().scale(pi / 180., 1.) + PolarAxes.PolarTransform()
extreme_finder = angle_helper.ExtremeFinderCycle(
20,
20,
lon_cycle=360,
lat_cycle=None,
lon_minmax=None,
lat_minmax=(0, inf),
)
grid_locator1 = angle_helper.LocatorDMS(12)
tick_formatter1 = angle_helper.FormatterDMS()
grid_helper = GridHelperCurveLinear(tr,
extreme_finder=extreme_finder,
grid_locator1=grid_locator1,
tick_formatter1=tick_formatter1)
ax1 = SubplotHost(fig, 1, 1, 1, grid_helper=grid_helper)
fig.add_subplot(ax1)
ax1.axis["right"].major_ticklabels.set_visible(True)
ax1.axis["top"].major_ticklabels.set_visible(True)
ax1.axis["right"].get_helper().nth_coord_ticks = 0
ax1.axis["bottom"].get_helper().nth_coord_ticks = 1
# draw the filled contoured map in polar coordinates
ax1.contour(transpose(mat(theta)) * mat(cos(phi * pi / 180)),
transpose(mat(theta)) * mat(sin(phi * pi / 180)),
1 / transpose(reshape(residue, (phi.size, -1))),
100,
lw=0.1)
cc = ax1.contourf(
transpose(mat(theta)) * mat(cos(phi * pi / 180)),
transpose(mat(theta)) * mat(sin(phi * pi / 180)),
1 / transpose(reshape(residue, (phi.size, -1))), 100)
# remove gaps between the contour lines
for c in cc.collections:
c.set_antialiased(False)
# show the MVAB direction
if mvabTheta is not None and mvabPhi is not None:
ax1.plot(mvabTheta * cos(mvabPhi * pi / 180),
mvabTheta * sin(mvabPhi * pi / 180),
'sk',
markersize=8)
# show the MVUB direction
if mvubTheta is not None and mvubPhi is not None:
ax1.plot(mvubTheta * cos(mvubPhi * pi / 180),
mvubTheta * sin(mvubPhi * pi / 180),
'dk',
markersize=8)
# show the optimal direction
ax1.plot(optTheta * cos(optPhi * pi / 180),
optTheta * sin(optPhi * pi / 180),
'.k',
markersize=15)
# aspect and initial axes limits
ax1.set_aspect(1.)
ax1.set_xlim(-90, 90)
ax1.set_ylim(-90, 90)
# add grid
ax1.grid(True)
# add colobar
cb = colorbar(cc, pad=0.07)
cb.locator = MaxNLocator(14)
cb.update_ticks()
cb.set_label(r"$1/\tilde{\mathcal{R}}$")
# save
if toSave:
savefig(resultsDir + '/eps/gsr_ResidualMap.eps', format='eps')
savefig(resultsDir + '/png/gsr_ResidualMap.png', format='png')
def test_axis_direction():
fig = plt.figure(figsize=(5, 5))
# PolarAxes.PolarTransform takes radian. However, we want our coordinate
# system in degree
tr = Affine2D().scale(np.pi / 180., 1.) + PolarAxes.PolarTransform()
# polar projection, which involves cycle, and also has limits in
# its coordinates, needs a special method to find the extremes
# (min, max of the coordinate within the view).
# 20, 20 : number of sampling points along x, y direction
extreme_finder = angle_helper.ExtremeFinderCycle(
20,
20,
lon_cycle=360,
lat_cycle=None,
lon_minmax=None,
lat_minmax=(0, np.inf),
)
grid_locator1 = angle_helper.LocatorDMS(12)
tick_formatter1 = angle_helper.FormatterDMS()
grid_helper = GridHelperCurveLinear(tr,
extreme_finder=extreme_finder,
grid_locator1=grid_locator1,
tick_formatter1=tick_formatter1)
ax1 = SubplotHost(fig, 1, 1, 1, grid_helper=grid_helper)
for axis in ax1.axis.values():
axis.set_visible(False)
fig.add_subplot(ax1)
ax1.axis["lat1"] = axis = grid_helper.new_floating_axis(
0, 130, axes=ax1, axis_direction="left")
axis.label.set_text("Test")
axis.label.set_visible(True)
axis.get_helper()._extremes = 0.001, 10
ax1.axis["lat2"] = axis = grid_helper.new_floating_axis(
0, 50, axes=ax1, axis_direction="right")
axis.label.set_text("Test")
axis.label.set_visible(True)
axis.get_helper()._extremes = 0.001, 10
ax1.axis["lon"] = axis = grid_helper.new_floating_axis(
1, 10, axes=ax1, axis_direction="bottom")
axis.label.set_text("Test 2")
axis.get_helper()._extremes = 50, 130
axis.major_ticklabels.set_axis_direction("top")
axis.label.set_axis_direction("top")
grid_helper.grid_finder.grid_locator1.den = 5
grid_helper.grid_finder.grid_locator2._nbins = 5
ax1.set_aspect(1.)
ax1.set_xlim(-8, 8)
ax1.set_ylim(-4, 12)
ax1.grid(True)
def polar_stuff(fig, telescope):
# PolarAxes.PolarTransform takes radian. However, we want our coordinate
# system in degree
tr = Affine2D().scale(np.pi / 180., 1.).translate(
+np.pi / 2., 0) + PolarAxes.PolarTransform()
# polar projection, which involves cycle, and also has limits in
# its coordinates, needs a special method to find the extremes
# (min, max of the coordinate within the view).
# 20, 20 : number of sampling points along x, y direction
n = 1
extreme_finder = angle_helper.ExtremeFinderCycle(
n,
n,
lon_cycle=360,
lat_cycle=None,
lon_minmax=None,
lat_minmax=(-90, 90),
)
grid_locator1 = angle_helper.LocatorDMS(12)
# Find a grid values appropriate for the coordinate (degree,
# minute, second).
tick_formatter1 = angle_helper.FormatterDMS()
# And also uses an appropriate formatter. Note that,the
# acceptable Locator and Formatter class is a bit different than
# that of mpl's, and you cannot directly use mpl's Locator and
# Formatter here (but may be possible in the future).
grid_helper = GridHelperCurveLinear(tr,
extreme_finder=extreme_finder,
grid_locator1=grid_locator1,
tick_formatter1=tick_formatter1)
ax1 = SubplotHost(fig, 1, 1, 1, grid_helper=grid_helper)
# make ticklabels of right and top axis visible.
ax1.axis["right"].major_ticklabels.set_visible(True)
ax1.axis["top"].major_ticklabels.set_visible(True)
# let right axis shows ticklabels for 1st coordinate (angle)
ax1.axis["right"].get_helper().nth_coord_ticks = 0
# let bottom axis shows ticklabels for 2nd coordinate (radius)
ax1.axis["bottom"].get_helper().nth_coord_ticks = 1
fig.add_subplot(ax1)
# A parasite axes with given transform
ax2 = ParasiteAxesAuxTrans(ax1, tr, "equal")
# note that ax2.transData == tr + ax1.transData
# Anything you draw in ax2 will match the ticks and grids of ax1.
ax1.parasites.append(ax2)
# intp = cbook.simple_linear_interpolation
#ax2.plot(intp(np.array([0, 30]), 50),
# intp(np.array([10., 10.]), 50),
# linewidth=2.0)
x = np.rad2deg(telescope.az.value) * np.cos(telescope.alt.value)
y = np.rad2deg(telescope.alt.value)
circle = plt.Circle(
(np.rad2deg(telescope.az.value - np.pi) * np.sin(telescope.alt.value),
np.rad2deg(-telescope.alt.value * np.cos(
(telescope.az.value - np.pi)))),
radius=7.7 / 2,
color="red",
alpha=0.2,
)
circle = plt.Circle(
(x, y),
radius=7.7 / 2,
color="red",
alpha=0.2,
)
ax1.add_artist(circle)
# point = ax1.scatter(x, y, c="b", s=20, zorder=10, transform=ax2.transData)
ax2.annotate(1, (x, y),
fontsize=15,
xytext=(4, 4),
textcoords='offset pixels')
ax1.set_xlim(-180, 180)
ax1.set_ylim(0, 90)
ax1.set_aspect(1.)
ax1.grid(True, zorder=0)
ax1.set_xlabel("Azimuth in degrees", fontsize=20)
ax1.set_ylabel("Zenith in degrees", fontsize=20)
plt.show()
return fig
def sgrid():
# From matplotlib demos:
# https://matplotlib.org/gallery/axisartist/demo_curvelinear_grid.html
# https://matplotlib.org/gallery/axisartist/demo_floating_axis.html
# PolarAxes.PolarTransform takes radian. However, we want our coordinate
# system in degree
tr = Affine2D().scale(np.pi/180., 1.) + PolarAxes.PolarTransform()
# polar projection, which involves cycle, and also has limits in
# its coordinates, needs a special method to find the extremes
# (min, max of the coordinate within the view).
# 20, 20 : number of sampling points along x, y direction
sampling_points = 20
extreme_finder = ModifiedExtremeFinderCycle(sampling_points, sampling_points,
lon_cycle=360,
lat_cycle=None,
lon_minmax=(90,270),
lat_minmax=(0, np.inf),)
grid_locator1 = angle_helper.LocatorDMS(15)
tick_formatter1 = FormatterDMS()
grid_helper = GridHelperCurveLinear(tr,
extreme_finder=extreme_finder,
grid_locator1=grid_locator1,
tick_formatter1=tick_formatter1
)
fig = plt.figure()
ax = SubplotHost(fig, 1, 1, 1, grid_helper=grid_helper)
# make ticklabels of right invisible, and top axis visible.
visible = True
ax.axis[:].major_ticklabels.set_visible(visible)
ax.axis[:].major_ticks.set_visible(False)
ax.axis[:].invert_ticklabel_direction()
ax.axis["wnxneg"] = axis = ax.new_floating_axis(0, 180)
axis.set_ticklabel_direction("-")
axis.label.set_visible(False)
ax.axis["wnxpos"] = axis = ax.new_floating_axis(0, 0)
axis.label.set_visible(False)
ax.axis["wnypos"] = axis = ax.new_floating_axis(0, 90)
axis.label.set_visible(False)
axis.set_axis_direction("left")
ax.axis["wnyneg"] = axis = ax.new_floating_axis(0, 270)
axis.label.set_visible(False)
axis.set_axis_direction("left")
axis.invert_ticklabel_direction()
axis.set_ticklabel_direction("-")
# let left axis shows ticklabels for 1st coordinate (angle)
ax.axis["left"].get_helper().nth_coord_ticks = 0
ax.axis["right"].get_helper().nth_coord_ticks = 0
ax.axis["left"].get_helper().nth_coord_ticks = 0
ax.axis["bottom"].get_helper().nth_coord_ticks = 0
fig.add_subplot(ax)
### RECTANGULAR X Y AXES WITH SCALE
#par2 = ax.twiny()
#par2.axis["top"].toggle(all=False)
#par2.axis["right"].toggle(all=False)
#new_fixed_axis = par2.get_grid_helper().new_fixed_axis
#par2.axis["left"] = new_fixed_axis(loc="left",
# axes=par2,
# offset=(0, 0))
#par2.axis["bottom"] = new_fixed_axis(loc="bottom",
# axes=par2,
# offset=(0, 0))
### FINISH RECTANGULAR
ax.grid(True, zorder=0,linestyle='dotted')
_final_setup(ax)
return ax, fig
def sgrid():
# From matplotlib demos:
# https://matplotlib.org/gallery/axisartist/demo_curvelinear_grid.html
# https://matplotlib.org/gallery/axisartist/demo_floating_axis.html
# PolarAxes.PolarTransform takes radian. However, we want our coordinate
# system in degree
tr = Affine2D().scale(np.pi/180., 1.) + PolarAxes.PolarTransform()
# polar projection, which involves cycle, and also has limits in
# its coordinates, needs a special method to find the extremes
# (min, max of the coordinate within the view).
# 20, 20 : number of sampling points along x, y direction
sampling_points = 20
extreme_finder = ModifiedExtremeFinderCycle(sampling_points, sampling_points,
lon_cycle=360,
lat_cycle=None,
lon_minmax=(90,270),
lat_minmax=(0, np.inf),)
grid_locator1 = angle_helper.LocatorDMS(15)
tick_formatter1 = FormatterDMS()
grid_helper = GridHelperCurveLinear(tr,
extreme_finder=extreme_finder,
grid_locator1=grid_locator1,
tick_formatter1=tick_formatter1
)
fig = plt.figure()
ax = SubplotHost(fig, 1, 1, 1, grid_helper=grid_helper)
# make ticklabels of right invisible, and top axis visible.
visible = True
ax.axis[:].major_ticklabels.set_visible(visible)
ax.axis[:].major_ticks.set_visible(False)
ax.axis[:].invert_ticklabel_direction()
ax.axis["wnxneg"] = axis = ax.new_floating_axis(0, 180)
axis.set_ticklabel_direction("-")
axis.label.set_visible(False)
ax.axis["wnxpos"] = axis = ax.new_floating_axis(0, 0)
axis.label.set_visible(False)
ax.axis["wnypos"] = axis = ax.new_floating_axis(0, 90)
axis.label.set_visible(False)
axis.set_axis_direction("left")
ax.axis["wnyneg"] = axis = ax.new_floating_axis(0, 270)
axis.label.set_visible(False)
axis.set_axis_direction("left")
axis.invert_ticklabel_direction()
axis.set_ticklabel_direction("-")
# let left axis shows ticklabels for 1st coordinate (angle)
ax.axis["left"].get_helper().nth_coord_ticks = 0
ax.axis["right"].get_helper().nth_coord_ticks = 0
ax.axis["left"].get_helper().nth_coord_ticks = 0
ax.axis["bottom"].get_helper().nth_coord_ticks = 0
fig.add_subplot(ax)
### RECTANGULAR X Y AXES WITH SCALE
#par2 = ax.twiny()
#par2.axis["top"].toggle(all=False)
#par2.axis["right"].toggle(all=False)
#new_fixed_axis = par2.get_grid_helper().new_fixed_axis
#par2.axis["left"] = new_fixed_axis(loc="left",
# axes=par2,
# offset=(0, 0))
#par2.axis["bottom"] = new_fixed_axis(loc="bottom",
# axes=par2,
# offset=(0, 0))
### FINISH RECTANGULAR
ax.grid(True, zorder=0,linestyle='dotted')
_final_setup(ax)
return ax, fig
def test_axis_direction():
fig = plt.figure(figsize=(5, 5))
# PolarAxes.PolarTransform takes radian. However, we want our coordinate
# system in degree
tr = Affine2D().scale(np.pi / 180., 1.) + PolarAxes.PolarTransform()
# polar projection, which involves cycle, and also has limits in
# its coordinates, needs a special method to find the extremes
# (min, max of the coordinate within the view).
# 20, 20 : number of sampling points along x, y direction
extreme_finder = angle_helper.ExtremeFinderCycle(20, 20,
lon_cycle=360,
lat_cycle=None,
lon_minmax=None,
lat_minmax=(0, np.inf),
)
grid_locator1 = angle_helper.LocatorDMS(12)
tick_formatter1 = angle_helper.FormatterDMS()
grid_helper = GridHelperCurveLinear(tr,
extreme_finder=extreme_finder,
grid_locator1=grid_locator1,
tick_formatter1=tick_formatter1)
ax1 = SubplotHost(fig, 1, 1, 1, grid_helper=grid_helper)
for axis in ax1.axis.values():
axis.set_visible(False)
fig.add_subplot(ax1)
ax1.axis["lat1"] = axis = grid_helper.new_floating_axis(
0, 130,
axes=ax1, axis_direction="left")
axis.label.set_text("Test")
axis.label.set_visible(True)
axis.get_helper()._extremes = 0.001, 10
ax1.axis["lat2"] = axis = grid_helper.new_floating_axis(
0, 50,
axes=ax1, axis_direction="right")
axis.label.set_text("Test")
axis.label.set_visible(True)
axis.get_helper()._extremes = 0.001, 10
ax1.axis["lon"] = axis = grid_helper.new_floating_axis(
1, 10,
axes=ax1, axis_direction="bottom")
axis.label.set_text("Test 2")
axis.get_helper()._extremes = 50, 130
axis.major_ticklabels.set_axis_direction("top")
axis.label.set_axis_direction("top")
grid_helper.grid_finder.grid_locator1.den = 5
grid_helper.grid_finder.grid_locator2._nbins = 5
ax1.set_aspect(1.)
ax1.set_xlim(-8, 8)
ax1.set_ylim(-4, 12)
ax1.grid(True)
def test_custom_transform():
class MyTransform(Transform):
input_dims = 2
output_dims = 2
is_separable = False
def __init__(self, resolution):
"""
Resolution is the number of steps to interpolate between each input
line segment to approximate its path in transformed space.
"""
Transform.__init__(self)
self._resolution = resolution
def transform(self, ll):
x, y = ll.T
return np.column_stack([x, y - x])
transform_non_affine = transform
def transform_path(self, path):
ipath = path.interpolated(self._resolution)
return Path(self.transform(ipath.vertices), ipath.codes)
transform_path_non_affine = transform_path
def inverted(self):
return MyTransformInv(self._resolution)
class MyTransformInv(Transform):
input_dims = 2
output_dims = 2
is_separable = False
def __init__(self, resolution):
Transform.__init__(self)
self._resolution = resolution
def transform(self, ll):
x, y = ll.T
return np.column_stack([x, y + x])
def inverted(self):
return MyTransform(self._resolution)
fig = plt.figure()
SubplotHost = host_subplot_class_factory(Axes)
tr = MyTransform(1)
grid_helper = GridHelperCurveLinear(tr)
ax1 = SubplotHost(fig, 1, 1, 1, grid_helper=grid_helper)
fig.add_subplot(ax1)
ax2 = ParasiteAxesAuxTrans(ax1, tr, "equal")
ax1.parasites.append(ax2)
ax2.plot([3, 6], [5.0, 10.])
ax1.set_aspect(1.)
ax1.set_xlim(0, 10)
ax1.set_ylim(0, 10)
ax1.grid(True)
