def describe_to(builder):
"""
Construct a very basic Linux system
"""
# We want a kernel..
linux_kernel.simple(builder,
name = "kernel",
checkout = "kernel-2.6.30-1",
linux_dir = "linux-2.6.30",
config_file = "kernel_config",
kernel_version = "2.6.30",
makeInstall = False)
# Steal a few basic libraries from Debian.
deb.simple(builder,
coName = "ubuntu-9.04",
name = "libc6",
roles = [ "root" ],
depends_on = [ ],
pkgFile = "libc6_2.9.4-ubuntu6_i386.deb")
deb.simple(builder,
coName = "ubuntu-9.04",
name = "libgcc1",
roles = [ "root" ],
depends_on = [ "libc6" ],
pkgFile = "libgcc1_4.3.3-5ubuntu4_i386.deb")
# If you want networking, you'll need nss too ..
deb.simple(builder,
coName = "ubuntu-9.04",
name = "libnss",
roles = [ "root" ],
depends_on = [ "libc6" ],
pkgFile = "libnss3-1d_3.12.2-rc1-0ubuntu2_i386.deb")
deb.simple(builder,
coName = "ubuntu-9.04",
name = "libnss-mdns",
roles = [ "root" ],
depends_on = [ "libc6" ],
pkgFile = "libnss-mdns_0.10-3ubuntu2_i386.deb")
# Some shells 'n' stuff :-)
make.simple(builder,
name = "busybox",
roles = [ "root" ],
checkout = "busybox-1.14.1",
deps = [ "libc6" ],
makefileName = "Makefile.muddle")
make.simple(builder,
name = "udev",
roles = [ "root" ],
checkout = "udev-142",
deps = [ "libc6" ],
makefileName = "Makefile.muddle")
make.simple(builder,
name = "etc-files",
roles = [ "root" ],
checkout = "etc-files",
deps = [ "libc6" ],
makefileName = "Makefile.muddle")
# Not strictly necessary, but let's face it - you're
# going to want DHCP
make.simple(builder,
name = "dhcpcd",
roles = [ "root" ],
checkout = "dhcpcd-5.0.4",
deps = [ ],
makefileName = "Makefile.muddle")
# Declare the Ubuntu checkout explicitly, since the
# deb builder obviously doesn't declare it every
# time it's used.
co_simple.relative(builder,
"ubuntu-9.04")
# OK. Deploy the ramdisk
cpio.deploy(builder, "root.cpio",
{ "root" : "/" },
"root",
[ "root" ])
# Construct a collector to take the cpio archive and kernel
# we've built and put them somewhere convenient.
collect.deploy(builder, "firmware")
collect.copy_from_package_obj(builder,
name = "firmware",
pkg_name = "kernel",
pkg_role = "kernel",
rel = "obj/arch/i386/boot/bzImage",
dest = "vmlinuz")
collect.copy_from_deployment(builder,
name = "firmware",
dep_name = "root",
rel = "root.cpio",
dest = "initrd",
recursive = False,
copyExactly = False)
builder.by_default_deploy_list(["root", "firmware"])
def describe_to(builder):
"""
Construct a very basic Linux system
"""
# We want a kernel..
linux_kernel.simple(builder,
name="kernel",
checkout="kernel-2.6.30-1",
linux_dir="linux-2.6.30",
config_file="kernel_config",
kernel_version="2.6.30",
makeInstall=False)
# Steal a few basic libraries from Debian.
deb.simple(builder,
coName="ubuntu-9.04",
name="libc6",
roles=["root"],
depends_on=[],
pkgFile="libc6_2.9.4-ubuntu6_i386.deb")
deb.simple(builder,
coName="ubuntu-9.04",
name="libgcc1",
roles=["root"],
depends_on=["libc6"],
pkgFile="libgcc1_4.3.3-5ubuntu4_i386.deb")
# If you want networking, you'll need nss too ..
deb.simple(builder,
coName="ubuntu-9.04",
name="libnss",
roles=["root"],
depends_on=["libc6"],
pkgFile="libnss3-1d_3.12.2-rc1-0ubuntu2_i386.deb")
deb.simple(builder,
coName="ubuntu-9.04",
name="libnss-mdns",
roles=["root"],
depends_on=["libc6"],
pkgFile="libnss-mdns_0.10-3ubuntu2_i386.deb")
# Some shells 'n' stuff :-)
make.simple(builder,
name="busybox",
roles=["root"],
checkout="busybox-1.14.1",
deps=["libc6"],
makefileName="Makefile.muddle")
make.simple(builder,
name="udev",
roles=["root"],
checkout="udev-142",
deps=["libc6"],
makefileName="Makefile.muddle")
make.simple(builder,
name="etc-files",
roles=["root"],
checkout="etc-files",
deps=["libc6"],
makefileName="Makefile.muddle")
# Not strictly necessary, but let's face it - you're
# going to want DHCP
make.simple(builder,
name="dhcpcd",
roles=["root"],
checkout="dhcpcd-5.0.4",
deps=[],
makefileName="Makefile.muddle")
# Declare the Ubuntu checkout explicitly, since the
# deb builder obviously doesn't declare it every
# time it's used.
co_simple.relative(builder, "ubuntu-9.04")
# OK. Deploy the ramdisk
cpio.deploy(builder, "root.cpio", {"root": "/"}, "root", ["root"])
# Construct a collector to take the cpio archive and kernel
# we've built and put them somewhere convenient.
collect.deploy(builder, "firmware")
collect.copy_from_package_obj(builder,
name="firmware",
pkg_name="kernel",
pkg_role="kernel",
rel="obj/arch/i386/boot/bzImage",
dest="vmlinuz")
collect.copy_from_deployment(builder,
name="firmware",
dep_name="root",
rel="root.cpio",
dest="initrd",
recursive=False,
copyExactly=False)
builder.by_default_deploy_list(["root", "firmware"])
def describe_to(builder):
role = 'omap'
roles = ['omap']
builder.add_default_role(role)
# filedep.deploy(builder, target_dir, name, roles)
#
# Register a file deployment.
#
# The deployment will take the roles specified in the role list, and build
# them into a deployment at deploy/[name].
#
# The deployment should eventually be located at target_dir.
filedep.deploy(builder,
'/',
'omap',
roles)
# There's a variety of things we need on (this, the host) system
# in order to build - I hope I've got this right (difficult to tell
# as I already have some stuff installed on *my* development system)
aptget.simple(builder, 'development_packages', role,
['zlib1g-dev', 'uboot-mkimage'])
# According to http://omappedia.org/wiki/LinuxOMAP_Kernel_Project, we get
# our OMAP kernel from:
muddled.checkouts.simple.absolute(builder, 'omap_kernel',
'git+git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git')
# Once we've got one worked out, we'll also want to retrieve a default
# kernel configuration (we don't, eventually, want to make the developer
# have to work that out every time!)
# We'll aim to make that with an out-of-tree makefile
# We could make a tailored subclass of muddled.pkgs.linux_kernel, and use
# that to build our kernel. I may still do that once I've figured out how
# it is different (one notable change is we're building uImage instead of
# zImage). For now, it's probably easier to have a Makefile.muddle
make.medium(builder,
name = "omap_kernel", # package name
roles = roles,
checkout = "builders",
deps = [],
makefileName = os.path.join("omap_kernel","Makefile.muddle"))
muddled.pkg.package_depends_on_checkout(builder.ruleset,
"omap_kernel", # this package
role, # in this role
"omap_kernel") # depends on this checkout
# On top of that, we want to build busybox
#
# According to the busybox website, we can retrieve sources via git:
#
# To grab a copy of the BusyBox repository using anonymous git access::
#
# git clone git://busybox.net/busybox.git
#
# Once you have the repository, stable branches can be checked out by
# doing::
#
# git checkout remotes/origin/1_NN_stable
#
# Once you've checked out a copy of the source tree, you can update your
# source tree at any time so it is in sync with the latest and greatest by
# entering your BusyBox directory and running the command::
#
# git pull
# So, for the moment, at least, let's go with the latest from source
# control (when we're finalising this, we're maybe better identifying
# a particular release to stick to)
muddled.checkouts.simple.absolute(builder, 'busybox',
'git+git://busybox.net/busybox.git')
# We'll aim to make that with an out-of-tree makefile
#
# 'deps' is a list of package names, which our make depends on.
#
# Specifically, for each <name> in 'deps', and for each <role> in 'roles',
# we will depend on "package:<name>{<role>}/postinstalled"
make.medium(builder,
name = "busybox", # package name
roles = roles,
checkout = "builders",
deps = [ 'omap_kernel' ],
makefileName = os.path.join("busybox","Makefile.muddle"))
# And we also depend on having actually checked out busybox
muddled.pkg.package_depends_on_checkout(builder.ruleset,
"busybox", # this package
role, # in this role
"busybox") # depends on this checkout
# Can we use the same bootloader and such that we already had for the
# android build?
# The bootloader and related items, which go into the FAT32 partition on
# the flash card, are retrieved from the net (eventually, I hope we'll be
# building u-boot, but for now the binary should do)
muddled.checkouts.simple.absolute(builder, 'MLO',
'wget+http://free-electrons.com/pub/demos/beagleboard/android/MLO')
muddled.checkouts.simple.absolute(builder, 'u-boot',
'wget+http://free-electrons.com/pub/demos/beagleboard/android/u-boot.bin')
# We need some way of getting them installed - let's foreshadow the day when
# we actually want to build u-boot ourselves, and pretend
make.medium(builder,
name = "u-boot", # package name
roles = roles,
checkout = "builders",
deps = [],
makefileName = os.path.join("u-boot","Makefile.muddle"))
muddled.pkg.package_depends_on_checkout(builder.ruleset,
"u-boot", # this package
role, # in this role
"u-boot") # depends on this checkout
# Oh, and this one as well...
rule = muddled.depend.depend_one(None,
label_from_string('package:u-boot/installed'),
label_from_string('checkout:MLO/checked_out'))
builder.ruleset.add(rule)
# And, of course, we need (the rest of) our Linux filesystem
muddled.checkouts.simple.absolute(builder, 'rootfs',
'bzr+ssh://[email protected]//opt/kynesim/projects/052/rootfs')
make.simple(builder, 'rootfs', role, 'rootfs', config=False,
makefileName='Makefile.muddle')
# But we depend on busybox to have installed the various binaries first
rule = muddled.depend.depend_one(None,
label_from_string('package:rootfs/installed'),
label_from_string('package:busybox/installed'))
builder.ruleset.add(rule)
# Deploy all our roles
builder.by_default_deploy_list(roles)
def describe_to(builder):
role = 'omap'
roles = ['omap']
builder.add_default_role(role)
# filedep.deploy(builder, target_dir, name, roles)
#
# Register a file deployment.
#
# The deployment will take the roles specified in the role list, and build
# them into a deployment at deploy/[name].
#
# The deployment should eventually be located at target_dir.
filedep.deploy(builder, '/', 'omap', roles)
# There's a variety of things we need on (this, the host) system
# in order to build - I hope I've got this right (difficult to tell
# as I already have some stuff installed on *my* development system)
aptget.simple(builder, 'development_packages', role,
['zlib1g-dev', 'uboot-mkimage'])
# According to http://omappedia.org/wiki/LinuxOMAP_Kernel_Project, we get
# our OMAP kernel from:
muddled.checkouts.simple.absolute(
builder, 'omap_kernel',
'git+git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git'
)
# Once we've got one worked out, we'll also want to retrieve a default
# kernel configuration (we don't, eventually, want to make the developer
# have to work that out every time!)
# We'll aim to make that with an out-of-tree makefile
# We could make a tailored subclass of muddled.pkgs.linux_kernel, and use
# that to build our kernel. I may still do that once I've figured out how
# it is different (one notable change is we're building uImage instead of
# zImage). For now, it's probably easier to have a Makefile.muddle
make.medium(
builder,
name="omap_kernel", # package name
roles=roles,
checkout="builders",
deps=[],
makefileName=os.path.join("omap_kernel", "Makefile.muddle"))
muddled.pkg.package_depends_on_checkout(
builder.ruleset,
"omap_kernel", # this package
role, # in this role
"omap_kernel") # depends on this checkout
# On top of that, we want to build busybox
#
# According to the busybox website, we can retrieve sources via git:
#
# To grab a copy of the BusyBox repository using anonymous git access::
#
# git clone git://busybox.net/busybox.git
#
# Once you have the repository, stable branches can be checked out by
# doing::
#
# git checkout remotes/origin/1_NN_stable
#
# Once you've checked out a copy of the source tree, you can update your
# source tree at any time so it is in sync with the latest and greatest by
# entering your BusyBox directory and running the command::
#
# git pull
# So, for the moment, at least, let's go with the latest from source
# control (when we're finalising this, we're maybe better identifying
# a particular release to stick to)
muddled.checkouts.simple.absolute(builder, 'busybox',
'git+git://busybox.net/busybox.git')
# We'll aim to make that with an out-of-tree makefile
#
# 'deps' is a list of package names, which our make depends on.
#
# Specifically, for each <name> in 'deps', and for each <role> in 'roles',
# we will depend on "package:<name>{<role>}/postinstalled"
make.medium(
builder,
name="busybox", # package name
roles=roles,
checkout="builders",
deps=['omap_kernel'],
makefileName=os.path.join("busybox", "Makefile.muddle"))
# And we also depend on having actually checked out busybox
muddled.pkg.package_depends_on_checkout(
builder.ruleset,
"busybox", # this package
role, # in this role
"busybox") # depends on this checkout
# Can we use the same bootloader and such that we already had for the
# android build?
# The bootloader and related items, which go into the FAT32 partition on
# the flash card, are retrieved from the net (eventually, I hope we'll be
# building u-boot, but for now the binary should do)
muddled.checkouts.simple.absolute(
builder, 'MLO',
'wget+http://free-electrons.com/pub/demos/beagleboard/android/MLO')
muddled.checkouts.simple.absolute(
builder, 'u-boot',
'wget+http://free-electrons.com/pub/demos/beagleboard/android/u-boot.bin'
)
# We need some way of getting them installed - let's foreshadow the day when
# we actually want to build u-boot ourselves, and pretend
make.medium(
builder,
name="u-boot", # package name
roles=roles,
checkout="builders",
deps=[],
makefileName=os.path.join("u-boot", "Makefile.muddle"))
muddled.pkg.package_depends_on_checkout(
builder.ruleset,
"u-boot", # this package
role, # in this role
"u-boot") # depends on this checkout
# Oh, and this one as well...
rule = muddled.depend.depend_one(
None, label_from_string('package:u-boot/installed'),
label_from_string('checkout:MLO/checked_out'))
builder.ruleset.add(rule)
# And, of course, we need (the rest of) our Linux filesystem
muddled.checkouts.simple.absolute(
builder, 'rootfs',
'bzr+ssh://[email protected]//opt/kynesim/projects/052/rootfs'
)
make.simple(builder,
'rootfs',
role,
'rootfs',
config=False,
makefileName='Makefile.muddle')
# But we depend on busybox to have installed the various binaries first
rule = muddled.depend.depend_one(
None, label_from_string('package:rootfs/installed'),
label_from_string('package:busybox/installed'))
builder.ruleset.add(rule)
# Deploy all our roles
builder.by_default_deploy_list(roles)