def test07a_polygons(self):
"Testing Polygon objects."
# Testing `from_bbox` class method
bbox = (-180, -90, 180, 90)
p = OGRGeometry.from_bbox(bbox)
self.assertEqual(bbox, p.extent)
prev = OGRGeometry('POINT(0 0)')
for p in self.geometries.polygons:
poly = OGRGeometry(p.wkt)
self.assertEqual(3, poly.geom_type)
self.assertEqual('POLYGON', poly.geom_name)
self.assertEqual(p.n_p, poly.point_count)
self.assertEqual(p.n_i + 1, len(poly))
# Testing area & centroid.
self.assertAlmostEqual(p.area, poly.area, 9)
x, y = poly.centroid.tuple
self.assertAlmostEqual(p.centroid[0], x, 9)
self.assertAlmostEqual(p.centroid[1], y, 9)
# Testing equivalence
self.assertEqual(True, poly == OGRGeometry(p.wkt))
self.assertEqual(True, poly != prev)
if p.ext_ring_cs:
ring = poly[0]
self.assertEqual(p.ext_ring_cs, ring.tuple)
self.assertEqual(p.ext_ring_cs, poly[0].tuple)
self.assertEqual(len(p.ext_ring_cs), ring.point_count)
for r in poly:
self.assertEqual('LINEARRING', r.geom_name)
def test01c_hex(self):
"Testing HEX input/output."
for g in self.geometries.hex_wkt:
geom1 = OGRGeometry(g.wkt)
self.assertEqual(g.hex, geom1.hex)
# Constructing w/HEX
geom2 = OGRGeometry(g.hex)
self.assertEqual(geom1, geom2)
def test01e_json(self):
"Testing GeoJSON input/output."
if not GEOJSON: return
for g in self.geometries.json_geoms:
geom = OGRGeometry(g.wkt)
if not hasattr(g, 'not_equal'):
self.assertEqual(g.json, geom.json)
self.assertEqual(g.json, geom.geojson)
self.assertEqual(OGRGeometry(g.wkt), OGRGeometry(geom.json))
def test01d_wkb(self):
"Testing WKB input/output."
for g in self.geometries.hex_wkt:
geom1 = OGRGeometry(g.wkt)
wkb = geom1.wkb
self.assertEqual(b2a_hex(wkb).upper(), g.hex)
# Constructing w/WKB.
geom2 = OGRGeometry(wkb)
self.assertEqual(geom1, geom2)
def test16_25D(self):
"Testing 2.5D geometries."
pnt_25d = OGRGeometry('POINT(1 2 3)')
self.assertEqual('Point25D', pnt_25d.geom_type.name)
self.assertEqual(3.0, pnt_25d.z)
self.assertEqual(3, pnt_25d.coord_dim)
ls_25d = OGRGeometry('LINESTRING(1 1 1,2 2 2,3 3 3)')
self.assertEqual('LineString25D', ls_25d.geom_type.name)
self.assertEqual([1.0, 2.0, 3.0], ls_25d.z)
self.assertEqual(3, ls_25d.coord_dim)
def test01a_ewkt(self):
"Testing EWKT input/output."
for ewkt_val in ('POINT (1 2 3)', 'LINEARRING (0 0,1 1,2 1,0 0)'):
# First with ewkt output when no SRID in EWKT
self.assertEqual(ewkt_val, OGRGeometry(ewkt_val).ewkt)
# No test consumption with an SRID specified.
ewkt_val = 'SRID=4326;%s' % ewkt_val
geom = OGRGeometry(ewkt_val)
self.assertEqual(ewkt_val, geom.ewkt)
self.assertEqual(4326, geom.srs.srid)
def test06_linearring(self):
"Testing LinearRing objects."
prev = OGRGeometry('POINT(0 0)')
for rr in self.geometries.linearrings:
lr = OGRGeometry(rr.wkt)
#self.assertEqual(101, lr.geom_type.num)
self.assertEqual('LINEARRING', lr.geom_name)
self.assertEqual(rr.n_p, len(lr))
self.assertEqual(True, lr == OGRGeometry(rr.wkt))
self.assertEqual(True, lr != prev)
prev = lr
def test10_difference(self):
"Testing difference()."
for i in xrange(len(self.geometries.topology_geoms)):
a = OGRGeometry(self.geometries.topology_geoms[i].wkt_a)
b = OGRGeometry(self.geometries.topology_geoms[i].wkt_b)
d1 = OGRGeometry(self.geometries.diff_geoms[i].wkt)
d2 = a.difference(b)
self.assertEqual(d1, d2)
self.assertEqual(d1, a - b) # __sub__ is difference operator
a -= b # testing __isub__
self.assertEqual(d1, a)
def test13_union(self):
"Testing union()."
for i in xrange(len(self.geometries.topology_geoms)):
a = OGRGeometry(self.geometries.topology_geoms[i].wkt_a)
b = OGRGeometry(self.geometries.topology_geoms[i].wkt_b)
u1 = OGRGeometry(self.geometries.union_geoms[i].wkt)
u2 = a.union(b)
self.assertEqual(u1, u2)
self.assertEqual(u1, a | b) # __or__ is union operator
a |= b # testing __ior__
self.assertEqual(u1, a)
def test02_points(self):
"Testing Point objects."
prev = OGRGeometry('POINT(0 0)')
for p in self.geometries.points:
if not hasattr(p, 'z'): # No 3D
pnt = OGRGeometry(p.wkt)
self.assertEqual(1, pnt.geom_type)
self.assertEqual('POINT', pnt.geom_name)
self.assertEqual(p.x, pnt.x)
self.assertEqual(p.y, pnt.y)
self.assertEqual((p.x, p.y), pnt.tuple)
def test09c_transform_dim(self):
"Testing coordinate dimension is the same on transformed geometries."
ls_orig = OGRGeometry('LINESTRING(-104.609 38.255)', 4326)
ls_trans = OGRGeometry('LINESTRING(992385.4472045 481455.4944650)',
2774)
prec = 3
ls_orig.transform(ls_trans.srs)
# Making sure the coordinate dimension is still 2D.
self.assertEqual(2, ls_orig.coord_dim)
self.assertAlmostEqual(ls_trans.x[0], ls_orig.x[0], prec)
self.assertAlmostEqual(ls_trans.y[0], ls_orig.y[0], prec)
def test12_symdifference(self):
"Testing sym_difference()."
for i in xrange(len(self.geometries.topology_geoms)):
a = OGRGeometry(self.geometries.topology_geoms[i].wkt_a)
b = OGRGeometry(self.geometries.topology_geoms[i].wkt_b)
d1 = OGRGeometry(self.geometries.sdiff_geoms[i].wkt)
d2 = a.sym_difference(b)
self.assertEqual(d1, d2)
self.assertEqual(d1,
a ^ b) # __xor__ is symmetric difference operator
a ^= b # testing __ixor__
self.assertEqual(d1, a)
def test15_extent(self):
"Testing `extent` property."
# The xmin, ymin, xmax, ymax of the MultiPoint should be returned.
mp = OGRGeometry('MULTIPOINT(5 23, 0 0, 10 50)')
self.assertEqual((0.0, 0.0, 10.0, 50.0), mp.extent)
# Testing on the 'real world' Polygon.
poly = OGRGeometry(self.geometries.polygons[3].wkt)
ring = poly.shell
x, y = ring.x, ring.y
xmin, ymin = min(x), min(y)
xmax, ymax = max(x), max(y)
self.assertEqual((xmin, ymin, xmax, ymax), poly.extent)
def test08_multipolygons(self):
"Testing MultiPolygon objects."
prev = OGRGeometry('POINT(0 0)')
for mp in self.geometries.multipolygons:
mpoly = OGRGeometry(mp.wkt)
self.assertEqual(6, mpoly.geom_type)
self.assertEqual('MULTIPOLYGON', mpoly.geom_name)
if mp.valid:
self.assertEqual(mp.n_p, mpoly.point_count)
self.assertEqual(mp.num_geom, len(mpoly))
self.assertRaises(OGRIndexError, mpoly.__getitem__, len(mpoly))
for p in mpoly:
self.assertEqual('POLYGON', p.geom_name)
self.assertEqual(3, p.geom_type)
self.assertEqual(mpoly.wkt, OGRGeometry(mp.wkt).wkt)
def test17_pickle(self):
"Testing pickle support."
g1 = OGRGeometry('LINESTRING(1 1 1,2 2 2,3 3 3)', 'WGS84')
g2 = pickle.loads(pickle.dumps(g1))
self.assertEqual(g1, g2)
self.assertEqual(4326, g2.srs.srid)
self.assertEqual(g1.srs.wkt, g2.srs.wkt)
def test05_multilinestring(self):
"Testing MultiLineString objects."
prev = OGRGeometry('POINT(0 0)')
for mls in self.geometries.multilinestrings:
mlinestr = OGRGeometry(mls.wkt)
self.assertEqual(5, mlinestr.geom_type)
self.assertEqual('MULTILINESTRING', mlinestr.geom_name)
self.assertEqual(mls.n_p, mlinestr.point_count)
self.assertEqual(mls.coords, mlinestr.tuple)
self.assertEqual(True, mlinestr == OGRGeometry(mls.wkt))
self.assertEqual(True, mlinestr != prev)
prev = mlinestr
for ls in mlinestr:
self.assertEqual(2, ls.geom_type)
self.assertEqual('LINESTRING', ls.geom_name)
self.assertRaises(OGRIndexError, mlinestr.__getitem__,
len(mlinestr))
def test03_multipoints(self):
"Testing MultiPoint objects."
for mp in self.geometries.multipoints:
mgeom1 = OGRGeometry(mp.wkt) # First one from WKT
self.assertEqual(4, mgeom1.geom_type)
self.assertEqual('MULTIPOINT', mgeom1.geom_name)
mgeom2 = OGRGeometry('MULTIPOINT') # Creating empty multipoint
mgeom3 = OGRGeometry('MULTIPOINT')
for g in mgeom1:
mgeom2.add(g) # adding each point from the multipoints
mgeom3.add(g.wkt) # should take WKT as well
self.assertEqual(mgeom1, mgeom2) # they should equal
self.assertEqual(mgeom1, mgeom3)
self.assertEqual(mp.coords, mgeom2.coords)
self.assertEqual(mp.n_p, mgeom2.point_count)
def test04_linestring(self):
"Testing LineString objects."
prev = OGRGeometry('POINT(0 0)')
for ls in self.geometries.linestrings:
linestr = OGRGeometry(ls.wkt)
self.assertEqual(2, linestr.geom_type)
self.assertEqual('LINESTRING', linestr.geom_name)
self.assertEqual(ls.n_p, linestr.point_count)
self.assertEqual(ls.coords, linestr.tuple)
self.assertEqual(True, linestr == OGRGeometry(ls.wkt))
self.assertEqual(True, linestr != prev)
self.assertRaises(OGRIndexError, linestr.__getitem__, len(linestr))
prev = linestr
# Testing the x, y properties.
x = [tmpx for tmpx, tmpy in ls.coords]
y = [tmpy for tmpx, tmpy in ls.coords]
self.assertEqual(x, linestr.x)
self.assertEqual(y, linestr.y)
def test01b_gml(self):
"Testing GML output."
for g in self.geometries.wkt_out:
geom = OGRGeometry(g.wkt)
exp_gml = g.gml
if GDAL_VERSION >= (1, 8):
# In GDAL 1.8, the non-conformant GML tag <gml:GeometryCollection> was
# replaced with <gml:MultiGeometry>.
exp_gml = exp_gml.replace('GeometryCollection',
'MultiGeometry')
self.assertEqual(exp_gml, geom.gml)
def verify_geom(self, geom, model_field):
"""
Verifies the geometry -- will construct and return a GeometryCollection
if necessary (for example if the model field is MultiPolygonField while
the mapped shapefile only contains Polygons).
"""
# Downgrade a 3D geom to a 2D one, if necessary.
if self.coord_dim != geom.coord_dim:
geom.coord_dim = self.coord_dim
if self.make_multi(geom.geom_type, model_field):
# Constructing a multi-geometry type to contain the single geometry
multi_type = self.MULTI_TYPES[geom.geom_type.num]
g = OGRGeometry(multi_type)
g.add(geom)
else:
g = geom
# Transforming the geometry with our Coordinate Transformation object,
# but only if the class variable `transform` is set w/a CoordTransform
# object.
if self.transform: g.transform(self.transform)
# Returning the WKT of the geometry.
return g.wkt
def test07b_closepolygons(self):
"Testing closing Polygon objects."
# Both rings in this geometry are not closed.
poly = OGRGeometry(
'POLYGON((0 0, 5 0, 5 5, 0 5), (1 1, 2 1, 2 2, 2 1))')
self.assertEqual(8, poly.point_count)
print "\nBEGIN - expecting IllegalArgumentException; safe to ignore.\n"
try:
c = poly.centroid
except OGRException:
# Should raise an OGR exception, rings are not closed
pass
else:
self.fail('Should have raised an OGRException!')
print "\nEND - expecting IllegalArgumentException; safe to ignore.\n"
# Closing the rings -- doesn't work on GDAL versions 1.4.1 and below:
# http://trac.osgeo.org/gdal/ticket/1673
if GDAL_VERSION <= (1, 4, 1): return
poly.close_rings()
self.assertEqual(
10, poly.point_count) # Two closing points should've been added
self.assertEqual(OGRGeometry('POINT(2.5 2.5)'), poly.centroid)
def test06_spatial_filter(self):
"Testing the Layer.spatial_filter property."
ds = DataSource(get_ds_file('cities', 'shp'))
lyr = ds[0]
# When not set, it should be None.
self.assertEqual(None, lyr.spatial_filter)
# Must be set a/an OGRGeometry or 4-tuple.
self.assertRaises(TypeError, lyr._set_spatial_filter, 'foo')
# Setting the spatial filter with a tuple/list with the extent of
# a buffer centering around Pueblo.
self.assertRaises(ValueError, lyr._set_spatial_filter, range(5))
filter_extent = (-105.609252, 37.255001, -103.609252, 39.255001)
lyr.spatial_filter = (-105.609252, 37.255001, -103.609252, 39.255001)
self.assertEqual(OGRGeometry.from_bbox(filter_extent),
lyr.spatial_filter)
feats = [feat for feat in lyr]
self.assertEqual(1, len(feats))
self.assertEqual('Pueblo', feats[0].get('Name'))
# Setting the spatial filter with an OGRGeometry for buffer centering
# around Houston.
filter_geom = OGRGeometry(
'POLYGON((-96.363151 28.763374,-94.363151 28.763374,-94.363151 30.763374,-96.363151 30.763374,-96.363151 28.763374))'
)
lyr.spatial_filter = filter_geom
self.assertEqual(filter_geom, lyr.spatial_filter)
feats = [feat for feat in lyr]
self.assertEqual(1, len(feats))
self.assertEqual('Houston', feats[0].get('Name'))
# Clearing the spatial filter by setting it to None. Now
# should indicate that there are 3 features in the Layer.
lyr.spatial_filter = None
self.assertEqual(3, len(lyr))
def test11_intersection(self):
"Testing intersects() and intersection()."
for i in xrange(len(self.geometries.topology_geoms)):
a = OGRGeometry(self.geometries.topology_geoms[i].wkt_a)
b = OGRGeometry(self.geometries.topology_geoms[i].wkt_b)
i1 = OGRGeometry(self.geometries.intersect_geoms[i].wkt)
self.assertEqual(True, a.intersects(b))
i2 = a.intersection(b)
self.assertEqual(i1, i2)
self.assertEqual(i1, a & b) # __and__ is intersection operator
a &= b # testing __iand__
self.assertEqual(i1, a)
def test18_ogrgeometry_transform_workaround(self):
"Testing coordinate dimensions on geometries after transformation."
# A bug in GDAL versions prior to 1.7 changes the coordinate
# dimension of a geometry after it has been transformed.
# This test ensures that the bug workarounds employed within
# `OGRGeometry.transform` indeed work.
wkt_2d = "MULTILINESTRING ((0 0,1 1,2 2))"
wkt_3d = "MULTILINESTRING ((0 0 0,1 1 1,2 2 2))"
srid = 4326
# For both the 2D and 3D MultiLineString, ensure _both_ the dimension
# of the collection and the component LineString have the expected
# coordinate dimension after transform.
geom = OGRGeometry(wkt_2d, srid)
geom.transform(srid)
self.assertEqual(2, geom.coord_dim)
self.assertEqual(2, geom[0].coord_dim)
self.assertEqual(wkt_2d, geom.wkt)
geom = OGRGeometry(wkt_3d, srid)
geom.transform(srid)
self.assertEqual(3, geom.coord_dim)
self.assertEqual(3, geom[0].coord_dim)
self.assertEqual(wkt_3d, geom.wkt)
def test09b_srs_transform(self):
"Testing transform()."
orig = OGRGeometry('POINT (-104.609 38.255)', 4326)
trans = OGRGeometry('POINT (992385.4472045 481455.4944650)', 2774)
# Using an srid, a SpatialReference object, and a CoordTransform object
# or transformations.
t1, t2, t3 = orig.clone(), orig.clone(), orig.clone()
t1.transform(trans.srid)
t2.transform(SpatialReference('EPSG:2774'))
ct = CoordTransform(SpatialReference('WGS84'), SpatialReference(2774))
t3.transform(ct)
# Testing use of the `clone` keyword.
k1 = orig.clone()
k2 = k1.transform(trans.srid, clone=True)
self.assertEqual(k1, orig)
self.assertNotEqual(k1, k2)
prec = 3
for p in (t1, t2, t3, k2):
self.assertAlmostEqual(trans.x, p.x, prec)
self.assertAlmostEqual(trans.y, p.y, prec)
def test14_add(self):
"Testing GeometryCollection.add()."
# Can't insert a Point into a MultiPolygon.
mp = OGRGeometry('MultiPolygon')
pnt = OGRGeometry('POINT(5 23)')
self.assertRaises(OGRException, mp.add, pnt)
# GeometryCollection.add may take an OGRGeometry (if another collection
# of the same type all child geoms will be added individually) or WKT.
for mp in self.geometries.multipolygons:
mpoly = OGRGeometry(mp.wkt)
mp1 = OGRGeometry('MultiPolygon')
mp2 = OGRGeometry('MultiPolygon')
mp3 = OGRGeometry('MultiPolygon')
for poly in mpoly:
mp1.add(poly) # Adding a geometry at a time
mp2.add(poly.wkt) # Adding WKT
mp3.add(mpoly) # Adding a MultiPolygon's entire contents at once.
for tmp in (mp1, mp2, mp3):
self.assertEqual(mpoly, tmp)
def test09a_srs(self):
"Testing OGR Geometries with Spatial Reference objects."
for mp in self.geometries.multipolygons:
# Creating a geometry w/spatial reference
sr = SpatialReference('WGS84')
mpoly = OGRGeometry(mp.wkt, sr)
self.assertEqual(sr.wkt, mpoly.srs.wkt)
# Ensuring that SRS is propagated to clones.
klone = mpoly.clone()
self.assertEqual(sr.wkt, klone.srs.wkt)
# Ensuring all children geometries (polygons and their rings) all
# return the assigned spatial reference as well.
for poly in mpoly:
self.assertEqual(sr.wkt, poly.srs.wkt)
for ring in poly:
self.assertEqual(sr.wkt, ring.srs.wkt)
# Ensuring SRS propagate in topological ops.
a = OGRGeometry(self.geometries.topology_geoms[0].wkt_a, sr)
b = OGRGeometry(self.geometries.topology_geoms[0].wkt_b, sr)
diff = a.difference(b)
union = a.union(b)
self.assertEqual(sr.wkt, diff.srs.wkt)
self.assertEqual(sr.srid, union.srs.srid)
# Instantiating w/an integer SRID
mpoly = OGRGeometry(mp.wkt, 4326)
self.assertEqual(4326, mpoly.srid)
mpoly.srs = SpatialReference(4269)
self.assertEqual(4269, mpoly.srid)
self.assertEqual('NAD83', mpoly.srs.name)
# Incrementing through the multipolyogn after the spatial reference
# has been re-assigned.
for poly in mpoly:
self.assertEqual(mpoly.srs.wkt, poly.srs.wkt)
poly.srs = 32140
for ring in poly:
# Changing each ring in the polygon
self.assertEqual(32140, ring.srs.srid)
self.assertEqual('NAD83 / Texas South Central',
ring.srs.name)
ring.srs = str(SpatialReference(4326)) # back to WGS84
self.assertEqual(4326, ring.srs.srid)
# Using the `srid` property.
ring.srid = 4322
self.assertEqual('WGS 72', ring.srs.name)
self.assertEqual(4322, ring.srid)
def _save(feat_range=default_range, num_feat=0, num_saved=0):
if feat_range:
layer_iter = self.layer[feat_range]
else:
layer_iter = self.layer
for feat in layer_iter:
num_feat += 1
# Getting the keyword arguments
try:
kwargs = self.feature_kwargs(feat)
except LayerMapError, msg:
# Something borked the validation
if strict: raise
elif not silent:
stream.write('Ignoring Feature ID %s because: %s\n' % (feat.fid, msg))
else:
# Constructing the model using the keyword args
is_update = False
if self.unique:
# If we want unique models on a particular field, handle the
# geometry appropriately.
try:
# Getting the keyword arguments and retrieving
# the unique model.
u_kwargs = self.unique_kwargs(kwargs)
m = self.model.objects.using(self.using).get(**u_kwargs)
is_update = True
# Getting the geometry (in OGR form), creating
# one from the kwargs WKT, adding in additional
# geometries, and update the attribute with the
# just-updated geometry WKT.
geom = getattr(m, self.geom_field).ogr
new = OGRGeometry(kwargs[self.geom_field])
for g in new: geom.add(g)
setattr(m, self.geom_field, geom.wkt)
except ObjectDoesNotExist:
# No unique model exists yet, create.
m = self.model(**kwargs)
else:
m = self.model(**kwargs)
try:
# Attempting to save.
m.save(using=self.using)
num_saved += 1
if verbose: stream.write('%s: %s\n' % (is_update and 'Updated' or 'Saved', m))
except SystemExit:
raise
except Exception, msg:
if self.transaction_mode == 'autocommit':
# Rolling back the transaction so that other model saves
# will work.
transaction.rollback_unless_managed()
if strict:
# Bailing out if the `strict` keyword is set.
if not silent:
stream.write('Failed to save the feature (id: %s) into the model with the keyword arguments:\n' % feat.fid)
stream.write('%s\n' % kwargs)
raise
elif not silent:
stream.write('Failed to save %s:\n %s\nContinuing\n' % (kwargs, msg))
def test01a_wkt(self):
"Testing WKT output."
for g in self.geometries.wkt_out:
geom = OGRGeometry(g.wkt)
self.assertEqual(g.wkt, geom.wkt)
def test19_equivalence_regression(self):
"Testing equivalence methods with non-OGRGeometry instances."
self.assertNotEqual(None, OGRGeometry('POINT(0 0)'))
self.assertEqual(False, OGRGeometry('LINESTRING(0 0, 1 1)') == 3)