def parse(self, patch, data):
bitstream = BitStream(data)
nknobs = bitstream.read_bits(16)
patch.knobs = [Knob()
for i in xrange(nknobs)] # G2Patch / G2Performance
for knob in patch.knobs:
knob.assigned = bitstream.read_bits(1)
if not knob.assigned:
continue
area, index, knob.isled, param = bitstream.read_bitsa([2, 8, 2, 7])
if type(patch) == Performance:
knob.slot = bitstream.read_bits(2)
perf = patch
patch = perf.slots[knob.slot].patch
else:
knob.slot = 0
if area == SETTINGS:
knob.param = get_settings_param(patch, index, param)
else:
module = get_patch_area(patch, area).find_module(index)
if module:
knob.param = module.params[param]
else:
knob.assigned = 0
continue
knob.param.knob = knob
def parse(self, patch, data):
bitstream = BitStream(data)
nknobs = bitstream.read_bits(16)
patch.knobs = [ Knob() for i in xrange(nknobs)] # G2Patch / G2Performance
for knob in patch.knobs:
knob.assigned = bitstream.read_bits(1)
if not knob.assigned:
continue
area, index, knob.isled, param = bitstream.read_bitsa([2, 8, 2, 7])
if type(patch) == Performance:
knob.slot = bitstream.read_bits(2)
perf = patch
patch = perf.slots[knob.slot].patch
else:
knob.slot = 0
if area == SETTINGS:
knob.param = get_settings_param(patch, index, param)
else:
module = get_patch_area(patch, area).find_module(index)
if module:
knob.param = module.params[param]
else:
knob.assigned = 0
continue
knob.param.knob = knob
def parse(self, patch, data):
bitstream = BitStream(data)
self.area = bitstream.read_bits(2)
if self.area == SETTINGS:
self.parse_morphs(patch.settings.morphs, bitstream)
else:
area = get_patch_area(patch, self.area)
self.parse_area(area, bitstream)
def parse(self, patch, data):
bitstream = BitStream(data)
self.area = bitstream.read_bits(2)
if self.area == SETTINGS:
self.parse_morphs(patch.settings.morphs, bitstream)
else:
area = get_patch_area(patch, self.area)
self.parse_area(area, bitstream)
def parse(self, patch, data):
bitstream = BitStream(data)
self.area = bitstream.read_bits(2)
if self.area == SETTINGS:
patch.settings = Settings() # G2Patch
self.parse_settings(patch.settings, bitstream)
else:
area = get_patch_area(patch, self.area)
self.parse_area(area, bitstream)
def parse(self, patch, data):
bitstream = BitStream(data)
lastnote = patch.lastnote = Note() # G2Patch
values = bitstream.read_bitsa([7] * 3)
lastnote.note, lastnote.attack, lastnote.release = values
nnotes = bitstream.read_bits(5) + 1
notes = patch.notes = [ Note() for i in xrange(nnotes) ] # G2Patch
for note in notes:
note.note, note.attack, note.release = bitstream.read_bitsa([7, 7, 7])
def parse(self, patch, data):
bitstream = BitStream(data)
self.area = bitstream.read_bits(2)
if self.area == SETTINGS:
patch.settings = Settings() # G2Patch
self.parse_settings(patch.settings, bitstream)
else:
area = get_patch_area(patch, self.area)
self.parse_area(area, bitstream)
def parse(self, patch, data):
bitstream = BitStream(data)
lastnote = patch.lastnote = Note() # G2Patch
values = bitstream.read_bitsa([7] * 3)
lastnote.note, lastnote.attack, lastnote.release = values
nnotes = bitstream.read_bits(5) + 1
notes = patch.notes = [Note() for i in xrange(nnotes)] # G2Patch
for note in notes:
note.note, note.attack, note.release = bitstream.read_bitsa(
[7, 7, 7])
def parse(self, patch, data):
bitstream = BitStream(data)
nctrls = bitstream.read_bits(7)
patch.ctrls = [ Ctrl() for i in xrange(nctrls)] # G2Patch? / G2Ctrl?
for ctrl in patch.ctrls:
ctrl.midicc, area, index, param = bitstream.read_bitsa([7, 2, 8, 7])
if area == SETTINGS:
ctrl.param = get_settings_param(patch, index, param)
else:
module = get_patch_area(patch, area).find_module(index)
ctrl.param = module.params[param]
ctrl.param.ctrl = ctrl
def parse(self, patch, data):
bitstream = BitStream(data)
nctrls = bitstream.read_bits(7)
patch.ctrls = [Ctrl() for i in xrange(nctrls)] # G2Patch? / G2Ctrl?
for ctrl in patch.ctrls:
ctrl.midicc, area, index, param = bitstream.read_bitsa(
[7, 2, 8, 7])
if area == SETTINGS:
ctrl.param = get_settings_param(patch, index, param)
else:
module = get_patch_area(patch, area).find_module(index)
ctrl.param = module.params[param]
ctrl.param.ctrl = ctrl
def cmd_settings(command):
g2usb.send_message([CMD_SYS, 0x41, 0x35, 0x04])
syst = g2usb.send_message([CMD_SYS, 0x41, 0x02])
synthname, syst = parse_name(syst[4:])
printf('%s:\n', synthname)
bitstream = BitStream(syst)
mode = bitstream.read_bits(1)
bitstream.seek_bit(8*5)
midis = bitstream.read_bitsa([8]*5)
sysex, local, _, prgch = bitstream.read_bitsa([8, 1, 7, 8])
_, clkse, clkre, _ = bitstream.read_bitsa([1, 1, 1, 5])
_, tune_cent, _, tune_semi = bitstream.read_bitsa([8, 8, 16, 8])
_, pedal_polarity, _, pedal_gain = bitstream.read_bitsa([8, 1, 7, 8])
printf(' mode: %s\n', ['Patch', 'Performance'][mode])
printf(' midi:\n')
printf(' slots: a:%d b:%d c:%d d:%d glob:%d\n', *midis)
printf(' sysex: %d\n', sysex+1)
printf(' local: %s\n', ['off','on'][local])
printf(' prgch: %s\n', ['off','send','recv','send/recv'][prgch])
printf(' clkse: %s\n', ['on','off'][clkse])
printf(' clkre: %s\n', ['on','off'][clkre])
printf(' tune semi: %d\n', struct.unpack('b',chr(tune_semi))[0])
printf(' tune cent: %d\n', struct.unpack('b',chr(tune_cent))[0])
printf(' pedal polarity: %s\n', ['open','closed'][pedal_polarity])
printf(' pedal gain: %.2f\n', 1.0 + 0.5*pedal_gain/32)
sels = g2usb.send_message([CMD_SYS, 0x41, 0x81])
data = g2usb.send_message([CMD_SYS, sels[2], 0x10])
perfname, data = parse_name(data[4:])
bitstream = BitStream(data, 8*4)
if mode:
printf('Performance: %s\n', perfname)
else:
printf('Patches: %s\n', perfname)
_, focus, _ = bitstream.read_bitsa([4, 2, 2])
range_enable, bpm, split, clock = bitstream.read_bitsa([8, 8, 8, 8])
printf(' focus: %s\n', 'abcd'[focus])
printf(' range enable: %s\n', ['off','on'][range_enable])
printf(' master clock: %d BPM: %s\n', bpm, ['stop','run'][clock])
printf(' kb split: %s\n', ['off','on'][split])
data = data[11:]
for slot in range(4):
name, data = parse_name(data)
active, key, hold, bank, patch, low, high = data[:7]
printf(' slot %s: %d:%d "%-16s"\n', 'abcd'[slot], bank+1, patch+1, name)
printf(' active: %-3s, ', ['off','on'][active])
printf('key: %-3s, ', ['off','on'][key])
printf('hold: %-3s, ', ['off','on'][hold])
printf('range: %d-%d\n', low, high)
data = data[10:]
return 0
def parse(self, patch, data): bitstream = BitStream(data) self.area = bitstream.read_bits(2) area = get_patch_area(patch, self.area) self.parse_area(area, bitstream)
def parse(self, patch, data):
bitstream = BitStream(data)
self.area = bitstream.read_bits(2)
area = get_patch_area(patch, self.area)
self.parse_area(area, bitstream)
