def main():
log.info("[INIT] Initializing health check")
devices = []
credentials = {"username": None, "password": None}
log.info("[CFG] Analyzing configuration...")
analyze_configuration(devices, credentials)
log.info("[HLTH] Performing health check on %s devices", len(devices))
for device in devices:
nxapi_conn = NXAPI(device["ip"], credentials["username"],
credentials["password"])
# Verifies:
# - Device model/modules
# - Device NX-OS software release
# - Device module diagnostic tests have passed
nxapi_conn.check_device_modules()
log.info(
"[DEV] Device with IP %s is a %s running NX-OS %s",
nxapi_conn.ip,
nxapi_conn.model,
nxapi_conn.nxos_version,
)
if nxapi_conn.hw_diags_passed:
log.info("[DEV] \tDiagnostics passing: %s",
nxapi_conn.hw_diags_passed)
elif not nxapi_conn.hw_diags_passed:
log.error("[DEV] \tDiagnostics passing: %s",
nxapi_conn.hw_diags_passed)
nxapi_conn.check_device_error_counters()
report_interfaces(nxapi_conn.interfaces)
nxapi_conn.check_copp_counters()
report_copp_counters(nxapi_conn.copp_counters)
nxapi_conn.check_intf_status()
report_intf_status(nxapi_conn.interfaces)
def __init__(self,
username='******',
password='******',
ip='192.168.200.50',
protocol='http',
port=None,
timeout=30):
if protocol not in ('http', 'https'):
raise ValueError('protocol must be http or https')
self.username = username
self.password = password
self.ip = ip
self.protocol = protocol
self.timeout = timeout
self.port = port
self.sw1 = NXAPI()
if self.port is not None:
self.sw1.set_target_url('%s://%s:%s/ins' %
(self.protocol, self.ip, self.port))
else:
self.sw1.set_target_url('%s://%s/ins' % (self.protocol, self.ip))
self.sw1.set_username(self.username)
self.sw1.set_password(self.password)
self.sw1.set_timeout(self.timeout)
def __init__(self,
username='******',
password='******',
ip='192.168.200.50'):
self.username = username
self.password = password
self.ip = ip
self.sw1 = NXAPI()
self.sw1.set_target_url('http://' + self.ip + '/ins')
self.sw1.set_username(self.username)
self.sw1.set_password(self.password)
def __init__(self,
username='******',
password='******',
ip='192.168.200.50',
protocol='http',
port=None,
timeout=30):
if protocol not in ('http', 'https'):
raise ValueError('protocol must be http or https')
self.username = username
self.password = password
self.ip = ip
self.protocol = protocol
self.timeout = timeout
self.port = port
self.sw1 = NXAPI()
if self.port is not None:
self.sw1.set_target_url('%s://%s:%s/ins' % (self.protocol,
self.ip, self.port))
else:
self.sw1.set_target_url('%s://%s/ins' % (self.protocol,
self.ip))
self.sw1.set_username(self.username)
self.sw1.set_password(self.password)
self.sw1.set_timeout(self.timeout)
def __init__(self,
username='******',
password='******',
ip='192.168.200.50',
protocol='http'):
if protocol not in ('http', 'https'):
raise ValueError('protocol must be http or https')
self.username = username
self.password = password
self.ip = ip
self.protocol = protocol
self.sw1 = NXAPI()
self.sw1.set_target_url('%s://%s/ins' % (self.protocol, self.ip))
self.sw1.set_username(self.username)
self.sw1.set_password(self.password)
def __init__(self,
username='******',
password='******',
ip='192.168.200.50'):
self.username = username
self.password = password
self.ip = ip
self.sw1 = NXAPI()
self.sw1.set_target_url('http://'+self.ip+'/ins')
self.sw1.set_username(self.username)
self.sw1.set_password(self.password)
def __init__(self,
username='******',
password='******',
ip='192.168.200.50',
protocol='http'):
if protocol not in ('http', 'https'):
raise ValueError('protocol must be http or https')
self.username = username
self.password = password
self.ip = ip
self.protocol = protocol
self.sw1 = NXAPI()
self.sw1.set_target_url('%s://%s/ins' % (self.protocol, self.ip))
self.sw1.set_username(self.username)
self.sw1.set_password(self.password)
def open(self):
self.sw1 = NXAPI()
self.sw1.set_target_url('http://' + self.ip + '/ins')
self.sw1.set_username(self.username)
self.sw1.set_password(self.password)
class Device():
def __init__(self,
username='******',
password='******',
ip='172.31.217.133'):
self.username = username
self.password = password
self.ip = ip
def open(self):
self.sw1 = NXAPI()
self.sw1.set_target_url('http://' + self.ip + '/ins')
self.sw1.set_username(self.username)
self.sw1.set_password(self.password)
def show(self, command, fmat='xml'):
self.sw1.set_msg_type('cli_show')
self.sw1.set_out_format(fmat)
self.sw1.set_cmd(command)
return self.sw1.send_req()
def conf(self, command, fmat='xml'):
self.sw1.set_msg_type('cli_conf')
self.sw1.set_out_format(fmat)
self.sw1.set_cmd(command)
return self.sw1.send_req()
class Device():
def __init__(self,
username='******',
password='******',
ip='192.168.200.50',
protocol='http',
timeout=30):
if protocol not in ('http', 'https'):
raise ValueError('protocol must be http or https')
self.username = username
self.password = password
self.ip = ip
self.protocol = protocol
self.timeout = timeout
self.sw1 = NXAPI()
self.sw1.set_target_url('%s://%s/ins' % (self.protocol, self.ip))
self.sw1.set_username(self.username)
self.sw1.set_password(self.password)
self.sw1.set_timeout(self.timeout)
def open(self):
# keeping to phase out programs that still use it.
pass
def cli_error_check(self, data_dict):
clierror = None
msg = None
error_check_list = data_dict['ins_api']['outputs']['output']
try:
for each in error_check_list:
clierror = each.get('clierror', None)
msg = each.get('msg', None)
except AttributeError:
clierror = error_check_list.get('clierror', None)
msg = error_check_list.get('msg', None)
if clierror:
return CLIError(clierror, msg)
def show(self, command, fmat='xml', text=False):
if text is False:
self.sw1.set_msg_type('cli_show')
elif text:
self.sw1.set_msg_type('cli_show_ascii')
self.sw1.set_out_format(fmat)
self.sw1.set_cmd(command)
data = self.sw1.send_req()
if fmat == 'xml':
data_dict = xmltodict.parse(data[1])
elif fmat == 'json':
data_dict = json.loads(data[1])
clierror = self.cli_error_check(data_dict)
if clierror:
raise clierror
return data
def config(self, command, fmat='xml'):
self.sw1.set_msg_type('cli_conf')
self.sw1.set_out_format(fmat)
self.sw1.set_cmd(command)
data = self.sw1.send_req()
# return self.sw1.send_req
if fmat == 'xml':
data_dict = xmltodict.parse(data[1])
elif fmat == 'json':
data_dict = json.loads(data[1])
clierror = self.cli_error_check(data_dict)
if clierror:
raise clierror
return data
def open(self):
self.sw1 = NXAPI()
self.sw1.set_target_url("http://" + self.ip + "/ins")
self.sw1.set_username(self.username)
self.sw1.set_password(self.password)
class Device():
def __init__(self,
username='******',
password='******',
ip='192.168.200.50',
protocol='http',
port=None,
timeout=30):
if protocol not in ('http', 'https'):
raise ValueError('protocol must be http or https')
self.username = username
self.password = password
self.ip = ip
self.protocol = protocol
self.timeout = timeout
self.port = port
self.sw1 = NXAPI()
if self.port is not None:
self.sw1.set_target_url('%s://%s:%s/ins' %
(self.protocol, self.ip, self.port))
else:
self.sw1.set_target_url('%s://%s/ins' % (self.protocol, self.ip))
self.sw1.set_username(self.username)
self.sw1.set_password(self.password)
self.sw1.set_timeout(self.timeout)
def open(self):
# keeping to phase out programs that still use it.
pass
def cli_error_check(self, data_dict):
clierror = None
msg = None
has_clierror = False
error_check_list = data_dict['ins_api']['outputs']['output']
try:
for index, each in enumerate(error_check_list):
clierror = each.get('clierror', None)
msg = each.get('msg', None)
if 'clierror' in each:
has_clierror = True
except AttributeError:
clierror = error_check_list.get('clierror', None)
msg = error_check_list.get('msg', None)
has_clierror = 'clierror' in error_check_list
if clierror or has_clierror:
return CLIError(clierror, msg, index)
def show(self, command, fmat='xml', text=False):
if text is False:
self.sw1.set_msg_type('cli_show')
elif text:
self.sw1.set_msg_type('cli_show_ascii')
self.sw1.set_out_format(fmat)
self.sw1.set_cmd(command)
data = self.sw1.send_req()
if fmat == 'xml':
data_dict = xmltodict.parse(data[1])
elif fmat == 'json':
data_dict = json.loads(data[1])
clierror = self.cli_error_check(data_dict)
if clierror:
raise clierror
return data
def config(self, command, fmat='xml'):
self.sw1.set_msg_type('cli_conf')
self.sw1.set_out_format(fmat)
self.sw1.set_cmd(command)
data = self.sw1.send_req()
# return self.sw1.send_req
if fmat == 'xml':
data_dict = xmltodict.parse(data[1])
elif fmat == 'json':
data_dict = json.loads(data[1])
clierror = self.cli_error_check(data_dict)
if clierror:
raise clierror
return data
class Device():
def __init__(self,
username='******',
password='******',
ip='192.168.200.50'):
self.username = username
self.password = password
self.ip = ip
self.sw1 = NXAPI()
self.sw1.set_target_url('http://' + self.ip + '/ins')
self.sw1.set_username(self.username)
self.sw1.set_password(self.password)
def open(self):
# keeping to phase out programs that still use it.
pass
def show(self, command, fmat='xml', text=False):
if text is False:
self.sw1.set_msg_type('cli_show')
elif text:
self.sw1.set_msg_type('cli_show_ascii')
self.sw1.set_out_format(fmat)
self.sw1.set_cmd(command)
return self.sw1.send_req()
def config(self, command, fmat='xml'):
self.sw1.set_msg_type('cli_conf')
self.sw1.set_out_format(fmat)
self.sw1.set_cmd(command)
# return self.sw1.send_req
data = self.sw1.send_req()
clierror = None
data_dict = xmltodict.parse(data[1])
error_check_list = data_dict['ins_api']['outputs']['output']
try:
for each in error_check_list:
clierror = each.get('clierror', None)
msg = each.get('msg', None)
except AttributeError:
clierror = error_check_list.get('clierror', None)
msg = error_check_list.get('msg', None)
except:
return data
if clierror:
raise IOError(clierror, msg)
return data
def open(self):
self.sw1 = NXAPI()
self.sw1.set_target_url('http://'+self.ip+'/ins')
self.sw1.set_username(self.username)
self.sw1.set_password(self.password)
class Device:
def __init__(self, username="******", password="******", ip="192.168.200.50"):
self.username = username
self.password = password
self.ip = ip
self.protocol = "https"
def open(self):
self.sw1 = NXAPI()
self.sw1.set_target_url("http://" + self.ip + "/ins")
self.sw1.set_username(self.username)
self.sw1.set_password(self.password)
def show(self, command, fmat="xml"):
self.sw1.set_msg_type("cli_show")
self.sw1.set_out_format(fmat)
self.sw1.set_cmd(command)
return self.sw1.send_req()
def conf(self, command, fmat="xml"):
self.sw1.set_msg_type("cli_conf")
self.sw1.set_out_format(fmat)
self.sw1.set_cmd(command)
return self.sw1.send_req()
class Device():
def __init__(self,username='******',password='******',ip='172.31.217.133'):
self.username = username
self.password = password
self.ip = ip
def open(self):
self.sw1 = NXAPI()
self.sw1.set_target_url('http://'+self.ip+'/ins')
self.sw1.set_username(self.username)
self.sw1.set_password(self.password)
def show(self,command,fmat='xml'):
self.sw1.set_msg_type('cli_show')
self.sw1.set_out_format(fmat)
self.sw1.set_cmd(command)
return self.sw1.send_req()
def conf(self,command,fmat='xml'):
self.sw1.set_msg_type('cli_conf')
self.sw1.set_out_format(fmat)
self.sw1.set_cmd(command)
return self.sw1.send_req()
class Device():
def __init__(self,
username='******',
password='******',
ip='192.168.200.50'):
self.username = username
self.password = password
self.ip = ip
self.sw1 = NXAPI()
self.sw1.set_target_url('http://'+self.ip+'/ins')
self.sw1.set_username(self.username)
self.sw1.set_password(self.password)
def open(self):
# keeping to phase out programs that still use it.
pass
def show(self, command, fmat='xml', text=False):
if text is False:
self.sw1.set_msg_type('cli_show')
elif text:
self.sw1.set_msg_type('cli_show_ascii')
self.sw1.set_out_format(fmat)
self.sw1.set_cmd(command)
return self.sw1.send_req()
def config(self, command, fmat='xml'):
self.sw1.set_msg_type('cli_conf')
self.sw1.set_out_format(fmat)
self.sw1.set_cmd(command)
# return self.sw1.send_req
data = self.sw1.send_req()
clierror = None
data_dict = xmltodict.parse(data[1])
error_check_list = data_dict['ins_api']['outputs']['output']
try:
for each in error_check_list:
clierror = each.get('clierror', None)
msg = each.get('msg', None)
except AttributeError:
clierror = error_check_list.get('clierror', None)
msg = error_check_list.get('msg', None)
except:
return data
if clierror:
raise IOError(clierror, msg)
return data
