コード例 #1
0
    def __init__(self,
                 N=12,
                 M=256,
                 start_index=10,
                 mapping=0,
                 modulation=16,
                 cp_ratio=0.25):
        gr.hier_block2.__init__(
            self,
            "scfdma_transmitter_bc",
            gr.io_signature(1, 1, gr.sizeof_char * 1),
            gr.io_signature(1, 1, gr.sizeof_gr_complex * 1),
        )

        ##################################################
        # Parameters
        ##################################################
        self.N = N
        self.M = M
        self.start_index = start_index
        self.modulation = modulation
        self.cp_ratio = cp_ratio
        self.mapping = mapping

        ##################################################
        # Blocks
        ##################################################
        self.ofdm_scfdma_subcarrier_mapper_vcvc_0 = ofdm.scfdma_subcarrier_mapper_vcvc(
            N, M, start_index, mapping)
        self.blocks_multiply_const_vxx_0 = blocks.multiply_const_vcc(
            [1.0 / (M * N)])
        self.ofdm_fbmc_symbol_creation_bvc_0 = ofdm.fbmc_symbol_creation_bvc(
            N, modulation)
        self.ofdm_cyclic_prefixer_0 = ofdm.cyclic_prefixer(
            M, int(M * (1 + cp_ratio)))
        self.fft_vxx_0_0 = fft.fft_vcc(M, False, (), True, 1)
        self.fft_vxx_0 = fft.fft_vcc(N, True, (), True, 1)

        ##################################################
        # Connections
        ##################################################
        self.connect((self.fft_vxx_0, 0),
                     (self.ofdm_scfdma_subcarrier_mapper_vcvc_0, 0))
        self.connect((self.fft_vxx_0_0, 0), (self.ofdm_cyclic_prefixer_0, 0))
        self.connect((self.ofdm_cyclic_prefixer_0, 0),
                     (self.blocks_multiply_const_vxx_0, 0))
        self.connect((self.blocks_multiply_const_vxx_0, 0), (self, 0))
        self.connect((self.ofdm_fbmc_symbol_creation_bvc_0, 0),
                     (self.fft_vxx_0, 0))
        self.connect((self.ofdm_scfdma_subcarrier_mapper_vcvc_0, 0),
                     (self.fft_vxx_0_0, 0))
        self.connect((self, 0), (self.ofdm_fbmc_symbol_creation_bvc_0, 0))
コード例 #2
0
    def __init__(self, vlen, data_blocks, preamble_block, cp_len, framelength,
                 bits_per_subc):
        gr.hier_block2.__init__(self, "ofdm_frame_src",
                                gr.io_signature(0, 0, 0),
                                gr.io_signature(1, 1, gr.sizeof_gr_complex))

        data_block_src_i = data_block_src(bits_per_subc, vlen, data_blocks)

        mux_ctrl = concatenate([[0], [1] * (framelength - 1)])

        preamble_src = gr.vector_source_c(preamble_block, True, vlen)
        self.preamble_src = preamble_src

        block_mux = ofdm.static_mux_v(vlen * gr.sizeof_gr_complex,
                                      mux_ctrl.tolist())
        block_stream = ofdm.cyclic_prefixer(vlen, vlen + cp_len)

        self.connect(preamble_src, (block_mux, 0))
        self.connect(data_block_src_i, (block_mux, 1))
        self.connect(block_mux, block_stream, self)

        self.reset_blocks = [data_block_src_i, block_mux]
        self.src = data_block_src_i
コード例 #3
0
    def __init__(self, N=12, M=256, start_index=10, mapping=0, modulation=16, cp_ratio=0.25):
        gr.hier_block2.__init__(self,
            "scfdma_transmitter_bc",
            gr.io_signature(1, 1, gr.sizeof_char*1),
            gr.io_signature(1, 1, gr.sizeof_gr_complex*1),
        )

        ##################################################
        # Parameters
        ##################################################
        self.N = N
        self.M = M
        self.start_index = start_index
        self.modulation = modulation
        self.cp_ratio = cp_ratio
        self.mapping = mapping

        ##################################################
        # Blocks
        ##################################################
        self.ofdm_scfdma_subcarrier_mapper_vcvc_0 = ofdm.scfdma_subcarrier_mapper_vcvc(N, M, start_index, mapping)
        self.blocks_multiply_const_vxx_0 = blocks.multiply_const_vcc([1.0/(M*N)])
        self.ofdm_fbmc_symbol_creation_bvc_0 = ofdm.fbmc_symbol_creation_bvc(N, modulation)
        self.ofdm_cyclic_prefixer_0 = ofdm.cyclic_prefixer(M, int(M*(1+cp_ratio)))
        self.fft_vxx_0_0 = fft.fft_vcc(M, False, (), True, 1)
        self.fft_vxx_0 = fft.fft_vcc(N, True, (), True, 1)

        ##################################################
        # Connections
        ##################################################
        self.connect((self.fft_vxx_0, 0), (self.ofdm_scfdma_subcarrier_mapper_vcvc_0, 0))    
        self.connect((self.fft_vxx_0_0, 0), (self.ofdm_cyclic_prefixer_0, 0))    
        self.connect((self.ofdm_cyclic_prefixer_0, 0), (self.blocks_multiply_const_vxx_0,0))
        self.connect((self.blocks_multiply_const_vxx_0,0), (self,0))    
        self.connect((self.ofdm_fbmc_symbol_creation_bvc_0, 0), (self.fft_vxx_0, 0))    
        self.connect((self.ofdm_scfdma_subcarrier_mapper_vcvc_0, 0), (self.fft_vxx_0_0, 0))    
        self.connect((self, 0), (self.ofdm_fbmc_symbol_creation_bvc_0, 0))    
コード例 #4
0
  def __init__( self, vlen, data_blocks, preamble_block, cp_len,
                framelength, bits_per_subc ):
    gr.hier_block2.__init__( self,
        "ofdm_frame_src",
        gr.io_signature(0,0,0),
        gr.io_signature( 1, 1, gr.sizeof_gr_complex ) )


    data_block_src_i = data_block_src( bits_per_subc, vlen, data_blocks )

    mux_ctrl = concatenate([[0],[1]*(framelength-1)])

    preamble_src = gr.vector_source_c( preamble_block, True, vlen )
    self.preamble_src = preamble_src

    block_mux = ofdm.static_mux_v( vlen * gr.sizeof_gr_complex, mux_ctrl )
    block_stream = ofdm.cyclic_prefixer( vlen, vlen+cp_len )

    self.connect( preamble_src, ( block_mux, 0 ) )
    self.connect( data_block_src_i, ( block_mux, 1 ) )
    self.connect( block_mux, block_stream, self )

    self.reset_blocks = [ data_block_src_i, block_mux ]
    self.src = data_block_src_i
コード例 #5
0
ファイル: schmidl.py プロジェクト: WindyCitySDR/gr-ofdm
  def __init__(self, fft_length, block_length, block_header, range, options):
    gr.hier_block2.__init__(self, "integer_fo_estimator",
      gr.io_signature3(3,3,gr.sizeof_gr_complex,gr.sizeof_float,gr.sizeof_char),
      gr.io_signature2(3,3,gr.sizeof_float,gr.sizeof_char))
    
    raise NotImplementedError,"Obsolete class"

    self._range = range

    # threshold after integer part frequency offset estimation
    # if peak value below threshold, assume false triggering
    self._thr_lo = 0.4 #0.19 # empirically found threshold. see ioe_metric.float
    self._thr_hi = 0.4 #0.2

    # stuff to be removed after bugfix for hierblock2s
    self.input = gr.kludge_copy(gr.sizeof_gr_complex)
    self.time_sync = gr.kludge_copy(gr.sizeof_char)
    self.epsilon = (self,1)
    self.connect((self,0),self.input)
    self.connect((self,2),self.time_sync)

    delay(gr.sizeof_char,
          block_header.schmidl_fine_sync[0]*block_length)

    # sample ofdm symbol (preamble 1 and 2)
    sampler_symbol1 = vector_sampler(gr.sizeof_gr_complex,fft_length)
    sampler_symbol2 = vector_sampler(gr.sizeof_gr_complex,fft_length)
    time_delay1 = delay(gr.sizeof_char,block_length*block_header.schmidl_fine_sync[1])
    self.connect(self.input, (sampler_symbol1,0))
    self.connect(self.input, (sampler_symbol2,0))
    if block_header.schmidl_fine_sync[0] > 0:
      time_delay0 = delay(gr.sizeof_char,block_length*block_header.schmidl_fine_sync[0])
      self.connect(self.time_sync, time_delay0, (sampler_symbol1,1))
    else:
      self.connect(self.time_sync, (sampler_symbol1,1))
    self.connect(self.time_sync, time_delay1, (sampler_symbol2,1))

    # negative fractional frequency offset estimate
    epsilon = gr.multiply_const_ff(-1.0)
    self.connect(self.epsilon, epsilon)

    # compensate for fractional frequency offset on per symbol base
    #  freq_shift: vector length, modulator sensitivity
    #  freq_shift third input: reset phase accumulator

    # symbol/preamble 1
    freq_shift_sym1 = frequency_shift_vcc(fft_length, 1.0/fft_length)
    self.connect(sampler_symbol1, (freq_shift_sym1,0))
    self.connect(epsilon, (freq_shift_sym1,1))
    self.connect(gr.vector_source_b([1], True), (freq_shift_sym1,2))

    # symbol/preamble 2
    freq_shift_sym2 = frequency_shift_vcc(fft_length, 1.0/fft_length)
    self.connect(sampler_symbol2, (freq_shift_sym2,0))
    self.connect(epsilon, (freq_shift_sym2,1))
    self.connect(gr.vector_source_b([1], True), (freq_shift_sym2,2))

    # fourier transfrom on both preambles
    fft_sym1 = gr.fft_vcc(fft_length, True, [], True) # Forward + Blockshift
    fft_sym2 = gr.fft_vcc(fft_length, True, [], True) # Forward + Blockshift

    # calculate schmidl's metric for estimation of freq. offset's integer part
    assert(hasattr(block_header, "schmidl_fine_sync"))
    pre1 = block_header.pilotsym_fd[block_header.schmidl_fine_sync[0]]
    pre2 = block_header.pilotsym_fd[block_header.schmidl_fine_sync[1]]
    diff_pn = concatenate([[conjugate(math.sqrt(2)*pre2[2*i]/pre1[2*i]),0.0j] for i in arange(len(pre1)/2)])
    cfo_estimator = schmidl_cfo_estimator(fft_length, len(pre1),
                                          self._range, diff_pn)
    self.connect(freq_shift_sym1, fft_sym1, (cfo_estimator,0))   # preamble 1
    self.connect(freq_shift_sym2, fft_sym2, (cfo_estimator,1))   # preamble 2

    # search for maximum and its argument in interval [-range .. +range]
    #arg_max = arg_max_vff(2*self._range + 1)
    arg_max_s = gr.argmax_fs(2*self._range+1)
    arg_max = gr.short_to_float()
    ifo_max = gr.max_ff(2*self._range + 1) # vlen
    ifo_estimate = gr.add_const_ff(-self._range)
    self.connect(cfo_estimator, arg_max_s, arg_max, ifo_estimate)
    self.connect(cfo_estimator, ifo_max)
    self.connect((arg_max_s,1),gr.null_sink(gr.sizeof_short))

    # threshold maximal value
    ifo_threshold = gr.threshold_ff(self._thr_lo, self._thr_hi, 0.0)
    ifo_thr_f2b = gr.float_to_char()
    self.connect(ifo_max, ifo_threshold, ifo_thr_f2b)

    # gating the streams ifo_estimate (integer part) and epsilon (frac. part)
    # if the metric's peak value was above the chosen threshold, assume to have
    # found a new burst. peak value below threshold results in blocking the
    # streams
    self.gate = gate_ff()
    self.connect(ifo_thr_f2b, (self.gate,0)) # threshold stream
    self.connect(ifo_estimate, (self.gate,1))
    self.connect(epsilon, (self.gate,2))


    # peak filtering
    # resynchronize and suppress peaks that didn't match a preamble
    filtered_time_sync = peak_resync_bb(True) # replace
    self.connect(self.time_sync, (filtered_time_sync,0))
    self.connect(ifo_thr_f2b, (filtered_time_sync,1))


    # find complete estimation for frequency offset
    # add together fractional and integer part
    freq_offset = gr.add_ff()
    self.connect((self.gate,1), gr.multiply_const_ff(-1.0), (freq_offset,0)) # integer offset
    self.connect((self.gate,2), (freq_offset,1)) # frac offset

    # output connections
    self.connect(freq_offset, (self,0))
    self.connect(filtered_time_sync, (self,1))
    self.connect((self.gate,0), (self,2)) # used for frame trigger


    #########################################
    # debugging
    if options.log:
      self.epsilon2_sink = gr.vector_sink_f()
      self.connect(epsilon, self.epsilon2_sink)

      self.connect(cfo_estimator, gr.file_sink(gr.sizeof_float*(self._range*2+1), "data/ioe_metric.float"))

      # output joint stream
      preamble_stream = gr.streams_to_vector(fft_length * gr.sizeof_gr_complex, 2)
      self.connect(fft_sym1, (preamble_stream,0))
      self.connect(fft_sym2, (preamble_stream,1))
      self.connect(preamble_stream, gr.file_sink(gr.sizeof_gr_complex * 2 * fft_length, "data/preambles.compl"))

      # output, preambles before and after correction, magnitude and complex spectrum
      self.connect(sampler_symbol1, gr.fft_vcc(fft_length, True, [], True), gr.file_sink(gr.sizeof_gr_complex * fft_length, "data/pre1_bef.compl"))
      self.connect(sampler_symbol1, gr.fft_vcc(fft_length, True, [], True), gr.complex_to_mag(fft_length), gr.file_sink(gr.sizeof_float * fft_length, "data/pre1_bef.float"))
      self.connect(sampler_symbol2, gr.fft_vcc(fft_length, True, [], True), gr.file_sink(gr.sizeof_gr_complex * fft_length, "data/pre2_bef.compl"))
      self.connect(sampler_symbol2, gr.fft_vcc(fft_length, True, [], True), gr.complex_to_mag(fft_length), gr.file_sink(gr.sizeof_float * fft_length, "data/pre2_bef.float"))
      self.connect(freq_shift_sym1, gr.fft_vcc(fft_length, True, [], True), gr.file_sink(gr.sizeof_gr_complex * fft_length,"data/pre1.compl"))
      self.connect(freq_shift_sym1, gr.fft_vcc(fft_length, True, [], True), gr.complex_to_mag(fft_length), gr.file_sink(gr.sizeof_float * fft_length,"data/pre1.float"))
      self.connect(freq_shift_sym2, gr.fft_vcc(fft_length, True, [], True), gr.file_sink(gr.sizeof_gr_complex * fft_length,"data/pre2.compl"))
      self.connect(freq_shift_sym2, gr.fft_vcc(fft_length, True, [], True), gr.complex_to_mag(fft_length), gr.file_sink(gr.sizeof_float * fft_length,"data/pre2.float"))

      # calculate epsilon from corrected source to check function
      test_cp = cyclic_prefixer(fft_length, block_length)
      test_eps = foe(fft_length)
      self.connect(freq_shift_sym1, test_cp, test_eps, gr.file_sink(gr.sizeof_float, "data/eps_after.float"))

    try:
        gr.hier_block.update_var_names(self, "ifo_estimator", vars())
        gr.hier_block.update_var_names(self, "ifo_estimator", vars(self))
    except:
        pass
コード例 #6
0
ファイル: transmit_path.py プロジェクト: aixtux/gr-ofdm
    def __init__(self, options):
        gr.hier_block2.__init__(self, "transmit_path",
                                gr.io_signature(0, 0, 0),
                                gr.io_signature(1, 1, gr.sizeof_gr_complex))

        common_options.defaults(options)

        config = self.config = station_configuration()

        config.data_subcarriers = options.subcarriers
        config.cp_length = options.cp_length
        config.frame_data_blocks = options.data_blocks
        config._verbose = options.verbose
        config.fft_length = options.fft_length
        config.dc_null = options.dc_null
        config.training_data = default_block_header(config.data_subcarriers,
                                                    config.fft_length,
                                                    config.dc_null, options)
        config.coding = options.coding
        config.bandwidth = options.bandwidth
        config.gui_frame_rate = options.gui_frame_rate
        config.fbmc = options.fbmc

        config.frame_id_blocks = 1  # FIXME

        # digital rms amplitude sent to USRP
        rms_amp = options.rms_amplitude
        self._options = copy.copy(options)

        config.block_length = config.fft_length + config.cp_length
        config.frame_data_part = config.frame_data_blocks + config.frame_id_blocks
        config.frame_length = config.frame_data_part + \
                              config.training_data.no_pilotsyms
        config.subcarriers = config.data_subcarriers + \
                             config.training_data.pilot_subcarriers
        config.virtual_subcarriers = config.fft_length - config.subcarriers - config.dc_null

        # default values if parameters not set
        if rms_amp is None:
            rms_amp = math.sqrt(config.subcarriers)
        config.rms_amplitude = rms_amp

        # check some bounds
        if config.fft_length < config.subcarriers:
            raise SystemError, "Subcarrier number must be less than FFT length"
        if config.fft_length < config.cp_length:
            raise SystemError, "Cyclic prefix length must be less than FFT length"

        ## shortcuts
        blen = config.block_length
        flen = config.frame_length
        dsubc = config.data_subcarriers
        vsubc = config.virtual_subcarriers

        # Adaptive Transmitter Concept
        used_id_bits = config.used_id_bits = 8  #TODO: no constant in source code
        rep_id_bits = config.rep_id_bits = config.data_subcarriers / used_id_bits  #BPSK
        if config.data_subcarriers % used_id_bits <> 0:
            raise SystemError, "Data subcarriers need to be multiple of %d" % (
                used_id_bits)

        # adapt OFDM frame rate and GUI display frame rate
        self.keep_frame_n = int(
            1.0 / (config.frame_length *
                   (config.cp_length + config.fft_length) / config.bandwidth) /
            config.gui_frame_rate)

        ## Allocation Control
        self.allocation_src = allocation_src(
            config.data_subcarriers, config.frame_data_blocks, config.coding,
            "tcp://*:3333", "tcp://" + options.rx_hostname + ":3322")
        if options.static_allocation:  #DEBUG
            # how many bits per subcarrier

            if options.coding:
                mode = 1  # Coding mode 1-9
                bitspermode = [0.5, 1, 1.5, 2, 3, 4, 4.5, 5,
                               6]  # Information bits per mode
                modulbitspermode = [1, 2, 2, 4, 4, 6, 6, 6,
                                    8]  # Coding bits per mode
                bitcount_vec = [
                    (int)(config.data_subcarriers * config.frame_data_blocks *
                          bitspermode[mode - 1])
                ]
                modul_bitcount_vec = [
                    config.data_subcarriers * config.frame_data_blocks *
                    modulbitspermode[mode - 1]
                ]
                bitcount_src = blocks.vector_source_i(bitcount_vec, True, 1)
                modul_bitcount_src = blocks.vector_source_i(
                    modul_bitcount_vec, True, 1)
                bitloading = mode
            else:
                bitloading = 1
                bitcount_vec = [
                    config.data_subcarriers * config.frame_data_blocks *
                    bitloading
                ]
                bitcount_src = blocks.vector_source_i(bitcount_vec, True, 1)
                modul_bitcount_src = bitcount_src

            # id's for frames
            id_vec = range(0, 256)
            id_src = blocks.vector_source_s(id_vec, True, 1)
            # bitloading for ID symbol and then once for data symbols
            #bitloading_vec = [1]*dsubc+[0]*(dsubc/2)+[2]*(dsubc/2)

            #test_allocation = [bitloading]*(int)(config.data_subcarriers/8)+ [0]*(int)(config.data_subcarriers/4*3) + [bitloading]*(int)(config.data_subcarriers/8)
            #bitloading_vec = [1]*dsubc+[bitloading]*dsubc
            test_allocation = [bitloading] * dsubc
            bitloading_vec = [bitloading] * dsubc + test_allocation
            bitloading_src = blocks.vector_source_b(bitloading_vec, True,
                                                    dsubc)
            # bitcount for frames
            #bitcount_vec = [config.data_subcarriers*config.frame_data_blocks*bitloading]
            bitcount_vec = [config.frame_data_blocks * sum(test_allocation)]
            bitcount_src = blocks.vector_source_i(bitcount_vec, True, 1)
            # power loading, here same for all symbols
            #power_vec = [1]*(int)(config.data_subcarriers/8)+ [0]*(int)(config.data_subcarriers/4*3) + [1]*(int)(config.data_subcarriers/8)
            power_vec = [1] * config.data_subcarriers
            power_src = blocks.vector_source_f(power_vec, True, dsubc)
            # mux control stream to mux id and data bits
            mux_vec = [0] * dsubc + [1] * bitcount_vec[0]
            mux_ctrl = blocks.vector_source_b(mux_vec, True, 1)
        else:
            id_src = (self.allocation_src, 0)
            bitcount_src = (self.allocation_src, 4)
            bitloading_src = (self.allocation_src, 2)
            power_src = (self.allocation_src, 1)
            if options.coding:
                modul_bitcount_src = (self.allocation_src, 5)
            else:
                modul_bitcount_src = bitcount_src
            mux_ctrl = ofdm.tx_mux_ctrl(dsubc)
            self.connect(modul_bitcount_src, mux_ctrl)

            #Initial allocation
            self.allocation_src.set_allocation([2] * config.data_subcarriers,
                                               [1] * config.data_subcarriers)
            self.allocation_src.set_allocation_scheme(0)
            if options.benchmarking:
                self.allocation_src.set_allocation(
                    [4] * config.data_subcarriers,
                    [1] * config.data_subcarriers)

        if options.lab_special_case:
            self.allocation_src.set_allocation(
                [0] * (config.data_subcarriers / 4) + [2] *
                (config.data_subcarriers / 2) + [0] *
                (config.data_subcarriers / 4), [1] * config.data_subcarriers)

        if options.log:
            log_to_file(self, id_src, "data/id_src.short")
            log_to_file(self, bitcount_src, "data/bitcount_src.int")
            log_to_file(self, bitloading_src, "data/bitloading_src.char")
            log_to_file(self, power_src, "data/power_src.cmplx")

        ## GUI probe output
        zmq_probe_bitloading = zeromq.pub_sink(gr.sizeof_char, dsubc,
                                               "tcp://*:4445")
        # also skip ID symbol bitloading with keep_one_in_n (side effect)
        # factor 2 for bitloading because we have two vectors per frame, one for id symbol and one for all payload/data symbols
        # factor config.frame_data_part for power because there is one vector per ofdm symbol per frame
        self.connect(bitloading_src,
                     blocks.keep_one_in_n(gr.sizeof_char * dsubc, 2 * 40),
                     zmq_probe_bitloading)
        zmq_probe_power = zeromq.pub_sink(gr.sizeof_float, dsubc,
                                          "tcp://*:4444")
        #self.connect(power_src, blocks.keep_one_in_n(gr.sizeof_gr_complex*dsubc,40), blocks.complex_to_real(dsubc), zmq_probe_power)
        self.connect(power_src,
                     blocks.keep_one_in_n(gr.sizeof_float * dsubc, 40),
                     zmq_probe_power)

        ## Workaround to avoid periodic structure
        seed(1)
        whitener_pn = [
            randint(0, 1) for i in range(used_id_bits * rep_id_bits)
        ]

        ## ID Encoder
        id_enc = self._id_encoder = repetition_encoder_sb(
            used_id_bits, rep_id_bits, whitener_pn)
        self.connect(id_src, id_enc)

        if options.log:
            id_enc_f = gr.char_to_float()
            self.connect(id_enc, id_enc_f)
            log_to_file(self, id_enc_f, "data/id_enc_out.float")

        ## Reference Data Source
        ber_ref_src = ber_reference_source(self._options)
        self.connect(id_src, (ber_ref_src, 0))
        self.connect(bitcount_src, (ber_ref_src, 1))

        if options.log:
            log_to_file(self, ber_ref_src, "data/ber_rec_src_tx.char")

        if options.log:
            log_to_file(self, btrig, "data/bitmap_trig.char")

        ## Bitmap Update Trigger for puncturing
        if not options.nopunct:
            bmaptrig_stream_puncturing = [
                1
            ] + [0] * (config.frame_data_blocks / 2 - 1)

            btrig_puncturing = self._bitmap_trigger_puncturing = blocks.vector_source_b(
                bmaptrig_stream_puncturing, True)
            bmapsrc_stream_puncturing = [1] * dsubc + [2] * dsubc
            bsrc_puncturing = self._bitmap_src_puncturing = blocks.vector_source_b(
                bmapsrc_stream_puncturing, True, dsubc)

        if options.log and options.coding and not options.nopunct:
            log_to_file(self, btrig_puncturing,
                        "data/bitmap_trig_puncturing.char")

        ## Frame Trigger
        ftrig_stream = [1] + [0] * (config.frame_data_part - 1)
        ftrig = self._frame_trigger = blocks.vector_source_b(
            ftrig_stream, True)

        ## Data Multiplexer
        # Input 0: control stream
        # Input 1: encoded ID stream
        # Inputs 2..n: data streams
        dmux = self._data_multiplexer = stream_controlled_mux_b()
        self.connect(mux_ctrl, (dmux, 0))
        self.connect(id_enc, (dmux, 1))

        if options.coding:
            fo = trellis.fsm(1, 2, [91, 121])
            encoder = self._encoder = trellis.encoder_bb(fo, 0)
            unpack = self._unpack = blocks.unpack_k_bits_bb(2)
            self.connect(ber_ref_src, encoder, unpack)

            if options.interleave:
                int_object = trellis.interleaver(2000, 666)
                interlv = trellis.permutation(int_object.K(),
                                              int_object.INTER(), 1,
                                              gr.sizeof_char)

            if not options.nopunct:
                bmaptrig_stream_puncturing = [
                    1
                ] + [0] * (config.frame_data_blocks / 2 - 1)
                btrig_puncturing = self._bitmap_trigger_puncturing = blocks.vector_source_b(
                    bmaptrig_stream_puncturing, True)
                puncturing = self._puncturing = puncture_bb(
                    config.data_subcarriers)
                self.connect(bitloading_src, (puncturing, 1))
                self.connect(self._bitmap_trigger_puncturing, (puncturing, 2))
                self.connect(unpack, puncturing)
                last_block = puncturing

                if options.interleave:
                    self.connect(last_block, interlv)
                    last_block = interlv

                if options.benchmarking:
                    self.connect(last_block,
                                 blocks.head(gr.sizeof_char, options.N),
                                 (dmux, 2))
                else:
                    self.connect(last_block, (dmux, 2))
            else:
                if options.benchmarking:
                    self.connect(unpack, blocks.head(gr.sizeof_char,
                                                     options.N), (dmux, 2))
                else:
                    self.connect(unpack, (dmux, 2))

        else:
            if options.benchmarking:
                self.connect(ber_ref_src, blocks.head(gr.sizeof_char,
                                                      options.N), (dmux, 2))
            else:
                self.connect(ber_ref_src, (dmux, 2))

        if options.log:
            dmux_f = gr.char_to_float()
            self.connect(dmux, dmux_f)
            log_to_file(self, dmux_f, "data/dmux_out.float")

        ## Modulator
        mod = self._modulator = generic_mapper_bcv(config.data_subcarriers,
                                                   config.coding,
                                                   config.frame_data_part)
        self.connect(dmux, (mod, 0))
        self.connect(bitloading_src, (mod, 1))
        #log_to_file(self, mod, "data/mod_out.compl")

        if options.log:
            log_to_file(self, mod, "data/mod_out.compl")
            modi = blocks.complex_to_imag(config.data_subcarriers)
            modr = blocks.complex_to_real(config.data_subcarriers)
            self.connect(mod, modi)
            self.connect(mod, modr)
            log_to_file(self, modi, "data/mod_imag_out.float")
            log_to_file(self, modr, "data/mod_real_out.float")

        ## Power allocator
        pa = self._power_allocator = multiply_frame_fc(config.frame_data_part,
                                                       config.data_subcarriers)
        self.connect(mod, (pa, 0))
        self.connect(power_src, (pa, 1))

        if options.log:
            log_to_file(self, pa, "data/pa_out.compl")

        # Standard Transmitter Parts

        ## Pilot subcarriers
        psubc = self._pilot_subcarrier_inserter = pilot_subcarrier_inserter()
        self.connect(pa, psubc)

        if options.log:
            log_to_file(self, psubc, "data/psubc_out.compl")

        ## Add virtual subcarriers
        if config.fft_length > config.subcarriers:
            vsubc = self._virtual_subcarrier_extender = \
                    vector_padding_dc_null(config.subcarriers, config.fft_length,config.dc_null)
            self.connect(psubc, vsubc)
        else:
            vsubc = self._virtual_subcarrier_extender = psubc

        if options.log:
            log_to_file(self, vsubc, "data/vsubc_out.compl")

        ## IFFT, no window, block shift
        ifft = self._ifft = fft_blocks.fft_vcc(config.fft_length, False, [],
                                               True)
        self.connect(vsubc, ifft)

        if options.log:
            log_to_file(self, ifft, "data/ifft_out.compl")

        ## Pilot blocks (preambles)
        pblocks = self._pilot_block_inserter = pilot_block_inserter(5, False)
        self.connect(ifft, pblocks)

        if options.log:
            log_to_file(self, pblocks, "data/pilot_block_ins_out.compl")

        ## Cyclic Prefix
        cp = self._cyclic_prefixer = cyclic_prefixer(config.fft_length,
                                                     config.block_length)
        self.connect(pblocks, cp)

        lastblock = cp

        if options.log:
            log_to_file(self, cp, "data/cp_out.compl")

        #Digital Amplifier for resource allocation
        #if not options.coding:
        rep = blocks.repeat(gr.sizeof_gr_complex,
                            config.frame_length * config.block_length)
        amp = blocks.multiply_cc()
        self.connect(lastblock, (amp, 0))
        self.connect((self.allocation_src, 3), rep, (amp, 1))
        lastblock = amp

        ## Digital Amplifier
        #amp = self._amplifier = gr.multiply_const_cc(1)
        amp = self._amplifier = ofdm.multiply_const_ccf(1.0)
        self.connect(lastblock, amp)
        self.set_rms_amplitude(rms_amp)

        if options.log:
            log_to_file(self, amp, "data/amp_tx_out.compl")

        ## Tx parameters
        bandwidth = options.bandwidth or 2e6
        bits = 8 * config.data_subcarriers * config.frame_data_blocks  # max. QAM256
        samples_per_frame = config.frame_length * config.block_length
        tb = samples_per_frame / bandwidth
        # set dummy carrier frequency if none available due to baseband mode
        if (options.tx_freq is None):
            options.tx_freq = 0.0
        self.tx_parameters = {'carrier_frequency':options.tx_freq/1e9,'fft_size':config.fft_length, 'cp_size':config.cp_length \
                              , 'subcarrier_spacing':options.bandwidth/config.fft_length/1e3 \
                              , 'data_subcarriers':config.data_subcarriers, 'bandwidth':options.bandwidth/1e6 \
                              , 'frame_length':config.frame_length  \
                              , 'symbol_time':(config.cp_length + config.fft_length)/options.bandwidth*1e6, 'max_data_rate':(bits/tb)/1e6}

        ## Setup Output
        self.connect(amp, self)

        # Display some information about the setup
        if config._verbose:
            self._print_verbage()
コード例 #7
0
ファイル: transmit_path2.py プロジェクト: luwangg/gr-ofdm-1
    def __init__(self, options):
        gr.hier_block2.__init__(self, "transmit_path",
                                gr.io_signature(0, 0, 0),
                                gr.io_signature(2, 2, gr.sizeof_gr_complex))

        common_options.defaults(options)

        config = self.config = station_configuration()

        config.data_subcarriers = options.subcarriers
        config.cp_length = options.cp_length
        config.frame_data_blocks = options.data_blocks
        config._verbose = options.verbose
        config.fft_length = options.fft_length
        config.training_data = default_block_header(config.data_subcarriers,
                                                    config.fft_length, options)
        config.tx_station_id = options.station_id
        config.coding = options.coding

        if config.tx_station_id is None:
            raise SystemError, "Station ID not set"

        config.frame_id_blocks = 1  # FIXME

        # digital rms amplitude sent to USRP
        rms_amp = options.rms_amplitude
        self._options = copy.copy(options)

        self.servants = []  # FIXME

        config.block_length = config.fft_length + config.cp_length
        config.frame_data_part = config.frame_data_blocks + config.frame_id_blocks
        config.frame_length = config.frame_data_part + \
                              config.training_data.no_pilotsyms
        config.subcarriers = config.data_subcarriers + \
                             config.training_data.pilot_subcarriers
        config.virtual_subcarriers = config.fft_length - config.subcarriers

        # default values if parameters not set
        if rms_amp is None:
            rms_amp = math.sqrt(config.subcarriers)
        config.rms_amplitude = rms_amp

        # check some bounds
        if config.fft_length < config.subcarriers:
            raise SystemError, "Subcarrier number must be less than FFT length"
        if config.fft_length < config.cp_length:
            raise SystemError, "Cyclic prefix length must be less than FFT length"

        ## shortcuts
        blen = config.block_length
        flen = config.frame_length
        dsubc = config.data_subcarriers
        vsubc = config.virtual_subcarriers

        # ------------------------------------------------------------------------ #
        # Adaptive Transmitter Concept

        used_id_bits = config.used_id_bits = 8  #TODO: no constant in source code
        rep_id_bits = config.rep_id_bits = config.data_subcarriers / used_id_bits  #BPSK
        if config.data_subcarriers % used_id_bits <> 0:
            raise SystemError, "Data subcarriers need to be multiple of %d" % (
                used_id_bits)

        ## Control Part
        if options.debug:
            self._control = ctrl = static_tx_control(options)
            print "Statix TX Control used"
        else:
            self._control = ctrl = corba_tx_control(options)
            print "CORBA TX Control used"

        id_src = (ctrl, 0)
        mux_src = (ctrl, 1)
        map_src = self._map_src = (ctrl, 2)
        pa_src = (ctrl, 3)

        if options.log:
            id_src_f = gr.short_to_float()
            self.connect(id_src, id_src_f)
            log_to_file(self, id_src_f, "data/id_src_out.float")

            mux_src_f = gr.short_to_float()
            self.connect(mux_src, mux_src_f)
            log_to_file(self, mux_src_f, "data/mux_src_out.float")

            map_src_s = blocks.vector_to_stream(gr.sizeof_char,
                                                config.data_subcarriers)
            map_src_f = gr.char_to_float()
            self.connect(map_src, map_src_s, map_src_f)
            ##log_to_file(self, map_src_f, "data/map_src.float")

            ##log_to_file(self, pa_src, "data/pa_src_out.float")

        ## Workaround to avoid periodic structure
        seed(1)
        whitener_pn = [
            randint(0, 1) for i in range(used_id_bits * rep_id_bits)
        ]

        ## ID Encoder
        id_enc = self._id_encoder = repetition_encoder_sb(
            used_id_bits, rep_id_bits, whitener_pn)
        self.connect(id_src, id_enc)

        if options.log:
            id_enc_f = gr.char_to_float()
            self.connect(id_enc, id_enc_f)
            log_to_file(self, id_enc_f, "data/id_enc_out.float")

        ## Bitmap Update Trigger
        # TODO
        #bmaptrig_stream = concatenate([[1, 2],[0]*(config.frame_data_part-7)])
        bmaptrig_stream = concatenate([[1, 1],
                                       [0] * (config.frame_data_part - 2)])
        print "bmaptrig_stream = ", bmaptrig_stream
        btrig = self._bitmap_trigger = blocks.vector_source_b(
            bmaptrig_stream.tolist(), True)
        if options.log:
            log_to_file(self, btrig, "data/bitmap_trig.char")

        ## Bitmap Update Trigger for puncturing
        # TODO
        if not options.nopunct:
            #bmaptrig_stream_puncturing = concatenate([[1],[0]*(config.frame_data_part-2)])
            bmaptrig_stream_puncturing = concatenate(
                [[1], [0] * (config.frame_data_blocks / 2 - 1)])

            btrig_puncturing = self._bitmap_trigger_puncturing = blocks.vector_source_b(
                bmaptrig_stream_puncturing.tolist(), True)
            bmapsrc_stream_puncturing = concatenate([[1] * dsubc, [2] * dsubc])
            bsrc_puncturing = self._bitmap_src_puncturing = blocks.vector_source_b(
                bmapsrc_stream_puncturing.tolist(), True, dsubc)

        if options.log and options.coding and not options.nopunct:
            log_to_file(self, btrig_puncturing,
                        "data/bitmap_trig_puncturing.char")

        ## Frame Trigger
        # TODO
        ftrig_stream = concatenate([[1], [0] * (config.frame_data_part - 1)])
        ftrig = self._frame_trigger = blocks.vector_source_b(
            ftrig_stream.tolist(), True)

        ## Data Multiplexer
        # Input 0: control stream
        # Input 1: encoded ID stream
        # Inputs 2..n: data streams
        dmux = self._data_multiplexer = stream_controlled_mux_b()
        self.connect(mux_src, (dmux, 0))
        self.connect(id_enc, (dmux, 1))

        self._data_multiplexer_nextport = 2

        if options.log:
            dmux_f = gr.char_to_float()
            self.connect(dmux, dmux_f)
            log_to_file(self, dmux_f, "data/dmux_out.float")

        ## Modulator
        mod = self._modulator = generic_mapper_bcv(config.data_subcarriers,
                                                   options.coding)

        self.connect(dmux, (mod, 0))
        self.connect(map_src, (mod, 1))
        self.connect(btrig, (mod, 2))

        if options.log:
            log_to_file(self, mod, "data/mod_out.compl")
            modi = gr.complex_to_imag(config.data_subcarriers)
            modr = gr.complex_to_real(config.data_subcarriers)
            self.connect(mod, modi)
            self.connect(mod, modr)
            log_to_file(self, modi, "data/mod_imag_out.float")
            log_to_file(self, modr, "data/mod_real_out.float")

        ## Power allocator
        if options.debug:

            ## static
            pa = self._power_allocator = power_allocator(
                config.data_subcarriers)
            self.connect(mod, (pa, 0))
            self.connect(pa_src, (pa, 1))

        else:

            ## with CORBA control event channel
            ns_ip = ctrl.ns_ip
            ns_port = ctrl.ns_port
            evchan = ctrl.evchan
            pa = self._power_allocator = corba_power_allocator(dsubc, \
                evchan, ns_ip, ns_port, True)

            self.connect(mod, (pa, 0))
            self.connect(id_src, (pa, 1))
            self.connect(ftrig, (pa, 2))

        if options.log:
            log_to_file(self, pa, "data/pa_out.compl")

        ## Pilot subcarriers
        psubc = self._pilot_subcarrier_inserter = pilot_subcarrier_inserter()
        self.connect(pa, psubc)

        pilot_subc = config.training_data.shifted_pilot_tones
        print "pilot_subc", pilot_subc
        stc = stc_encoder(config.subcarriers, config.frame_data_blocks,
                          pilot_subc)

        self.connect(psubc, stc)

        if options.log:
            log_to_file(self, psubc, "data/psubc_out.compl")
            log_to_file(self, psubc_2, "data/psubc2_out.compl")
            log_to_file(self, pa, "data/pa.compl")
            log_to_file(self, (stc, 0), "data/stc_0.compl")
            log_to_file(self, (stc, 1), "data/stc_1.compl")

        ## Add virtual subcarriers
        if config.fft_length > config.subcarriers:
            vsubc = self._virtual_subcarrier_extender = \
                    vector_padding(config.subcarriers, config.fft_length)
            self.connect(stc, vsubc)
            vsubc_2 = self._virtual_subcarrier_extender_2 = \
                    vector_padding(config.subcarriers, config.fft_length)
            self.connect((stc, 1), vsubc_2)
        else:
            vsubc = self._virtual_subcarrier_extender = psubc
            vsubc_2 = self._virtual_subcarrier_extender_2 = psubc_2

        log_to_file(self, psubc, "data/psubc.compl")
        log_to_file(self, stc, "data/stc1.compl")
        log_to_file(self, (stc, 1), "data/stc2.compl")
        if options.log:
            log_to_file(self, vsubc, "data/vsubc_out.compl")
            log_to_file(self, vsubc_2, "data/vsubc2_out.compl")

        ## IFFT, no window, block shift
        ifft = self._ifft = fft_blocks.fft_vcc(config.fft_length, False, [],
                                               True)
        self.connect(vsubc, ifft)
        ifft_2 = self._ifft_2 = fft_blocks.fft_vcc(config.fft_length, False,
                                                   [], True)
        self.connect(vsubc_2, ifft_2)

        if options.log:
            log_to_file(self, ifft, "data/ifft_out.compl")
            log_to_file(self, ifft_2, "data/ifft2_out.compl")

        ## Pilot blocks (preambles)
        pblocks = self._pilot_block_inserter = pilot_block_inserter(1, False)
        self.connect(ifft, pblocks)
        pblocks_2 = self._pilot_block_inserter_2 = pilot_block_inserter(
            2, False)
        self.connect(ifft_2, pblocks_2)

        if options.log:
            log_to_file(self, pblocks, "data/pilot_block_ins_out.compl")
            log_to_file(self, pblocks_2, "data/pilot_block_ins2_out.compl")

        ## Cyclic Prefix
        cp = self._cyclic_prefixer = cyclic_prefixer(config.fft_length,
                                                     config.block_length)
        self.connect(pblocks, cp)
        cp_2 = self._cyclic_prefixer_2 = cyclic_prefixer(
            config.fft_length, config.block_length)
        self.connect(pblocks_2, cp_2)

        lastblock = cp
        lastblock_2 = cp_2

        if options.log:
            log_to_file(self, cp, "data/cp_out.compl")
            log_to_file(self, cp_2, "data/cp2_out.compl")

        if options.cheat:
            ## Artificial Channel
            # kept to compare with previous system
            achan_ir = concatenate([[1.0], [0.0] * (config.cp_length - 1)])
            achan = self._artificial_channel = gr.fir_filter_ccc(1, achan_ir)
            self.connect(lastblock, achan)
            lastblock = achan
            achan_2 = self._artificial_channel_2 = gr.fir_filter_ccc(
                1, achan_ir)
            self.connect(lastblock_2, achan_2)
            lastblock_2 = achan_2

        ## Digital Amplifier
        amp = self._amplifier = ofdm.multiply_const_ccf(1.0 / math.sqrt(2))
        self.connect(lastblock, amp)
        amp_2 = self._amplifier_2 = ofdm.multiply_const_ccf(1.0 / math.sqrt(2))
        self.connect(lastblock_2, amp_2)
        self.set_rms_amplitude(rms_amp)

        if options.log:
            log_to_file(self, amp, "data/amp_tx_out.compl")
            log_to_file(self, amp_2, "data/amp_tx2_out.compl")

        ## Setup Output
        self.connect(amp, (self, 0))
        self.connect(amp_2, (self, 1))

        # ------------------------------------------------------------------------ #

        # Display some information about the setup
        if config._verbose:
            self._print_verbage()
コード例 #8
0
ファイル: transmit_path.py プロジェクト: luwangg/gr-ofdm-1
  def __init__(self, options):
    gr.hier_block2.__init__(self, "transmit_path",
        gr.io_signature(0,0,0),
        gr.io_signature(1,1,gr.sizeof_gr_complex))

    common_options.defaults(options)

    config = self.config = station_configuration()

    config.data_subcarriers    = options.subcarriers
    config.cp_length           = options.cp_length
    config.frame_data_blocks   = options.data_blocks
    config._verbose            = options.verbose
    config.fft_length          = options.fft_length
    config.dc_null             = options.dc_null
    config.training_data       = default_block_header(config.data_subcarriers,
                                          config.fft_length,config.dc_null,options)
    config.coding              = options.coding
    config.bandwidth           = options.bandwidth
    config.gui_frame_rate      = options.gui_frame_rate
    config.fbmc                = options.fbmc


    config.frame_id_blocks     = 1 # FIXME

    # digital rms amplitude sent to USRP
    rms_amp                    = options.rms_amplitude
    self._options              = copy.copy(options)


    config.block_length = config.fft_length + config.cp_length
    config.frame_data_part = config.frame_data_blocks + config.frame_id_blocks
    config.frame_length = config.frame_data_part + \
                          config.training_data.no_pilotsyms
    config.subcarriers = config.data_subcarriers + \
                         config.training_data.pilot_subcarriers
    config.virtual_subcarriers = config.fft_length - config.subcarriers - config.dc_null

    # default values if parameters not set
    if rms_amp is None:
      rms_amp = math.sqrt(config.subcarriers)
    config.rms_amplitude = rms_amp

    # check some bounds
    if config.fft_length < config.subcarriers:
      raise SystemError, "Subcarrier number must be less than FFT length"
    if config.fft_length < config.cp_length:
      raise SystemError, "Cyclic prefix length must be less than FFT length"

    ## shortcuts
    blen = config.block_length
    flen = config.frame_length
    dsubc = config.data_subcarriers
    vsubc = config.virtual_subcarriers

    # Adaptive Transmitter Concept
    used_id_bits = config.used_id_bits = 8 #TODO: no constant in source code
    rep_id_bits = config.rep_id_bits = config.data_subcarriers/used_id_bits #BPSK
    if config.data_subcarriers % used_id_bits <> 0:
      raise SystemError,"Data subcarriers need to be multiple of %d" % (used_id_bits)

    # adapt OFDM frame rate and GUI display frame rate
    self.keep_frame_n = int(1.0 / ( config.frame_length * (config.cp_length + config.fft_length) / config.bandwidth ) / config.gui_frame_rate)

    ## Allocation Control
    self.allocation_src = allocation_src(config.data_subcarriers, config.frame_data_blocks, config.coding, "tcp://*:3333", "tcp://"+options.rx_hostname+":3322")
    if options.static_allocation: #DEBUG
        # how many bits per subcarrier
        
        if options.coding:
            mode = 1 # Coding mode 1-9
            bitspermode= [0.5,1,1.5,2,3,4,4.5,5,6] # Information bits per mode
            modulbitspermode = [1,2,2,4,4,6,6,6,8] # Coding bits per mode
            bitcount_vec = [(int)(config.data_subcarriers*config.frame_data_blocks*bitspermode[mode-1])]
            modul_bitcount_vec = [config.data_subcarriers*config.frame_data_blocks*modulbitspermode[mode-1]]
            bitcount_src = blocks.vector_source_i(bitcount_vec,True,1)
            modul_bitcount_src = blocks.vector_source_i(modul_bitcount_vec,True,1)
            bitloading = mode
        else:
            bitloading = 1
            bitcount_vec = [config.data_subcarriers*config.frame_data_blocks*bitloading]
            bitcount_src = blocks.vector_source_i(bitcount_vec,True,1)
            modul_bitcount_src = bitcount_src
            
        # id's for frames
        id_vec = range(0,256)
        id_src = blocks.vector_source_s(id_vec,True,1)
        # bitloading for ID symbol and then once for data symbols
        #bitloading_vec = [1]*dsubc+[0]*(dsubc/2)+[2]*(dsubc/2)
        
        #test_allocation = [bitloading]*(int)(config.data_subcarriers/8)+ [0]*(int)(config.data_subcarriers/4*3) + [bitloading]*(int)(config.data_subcarriers/8)
        #bitloading_vec = [1]*dsubc+[bitloading]*dsubc
        test_allocation = [bitloading]*dsubc
        bitloading_vec = [bitloading]*dsubc+test_allocation
        bitloading_src = blocks.vector_source_b(bitloading_vec,True,dsubc)
        # bitcount for frames
        #bitcount_vec = [config.data_subcarriers*config.frame_data_blocks*bitloading]
        bitcount_vec = [config.frame_data_blocks*sum(test_allocation)]
        bitcount_src = blocks.vector_source_i(bitcount_vec,True,1)
        # power loading, here same for all symbols
        #power_vec = [1]*(int)(config.data_subcarriers/8)+ [0]*(int)(config.data_subcarriers/4*3) + [1]*(int)(config.data_subcarriers/8)
        power_vec = [1]*config.data_subcarriers
        power_src = blocks.vector_source_f(power_vec,True,dsubc)
        # mux control stream to mux id and data bits
        mux_vec = [0]*dsubc+[1]*bitcount_vec[0]
        mux_ctrl = blocks.vector_source_b(mux_vec,True,1)
    else:
        id_src = (self.allocation_src,0)
        bitcount_src = (self.allocation_src,4)
        bitloading_src = (self.allocation_src,2)
        power_src = (self.allocation_src,1)
        if options.coding: 
            modul_bitcount_src = (self.allocation_src,5)
        else:
            modul_bitcount_src = bitcount_src
        mux_ctrl = ofdm.tx_mux_ctrl(dsubc)
        self.connect(modul_bitcount_src,mux_ctrl)
        
        #Initial allocation
        self.allocation_src.set_allocation([1]*config.data_subcarriers,[1]*config.data_subcarriers)   
        self.allocation_src.set_allocation_scheme(0)
        if options.benchmarking:
            self.allocation_src.set_allocation([4]*config.data_subcarriers,[1]*config.data_subcarriers)        

    
    if options.lab_special_case:
        self.allocation_src.set_allocation([0]*(config.data_subcarriers/4)+[2]*(config.data_subcarriers/2)+[0]*(config.data_subcarriers/4),[1]*config.data_subcarriers)

    if options.log:
        log_to_file(self, id_src, "data/id_src.short")
        log_to_file(self, bitcount_src, "data/bitcount_src.int")
        log_to_file(self, bitloading_src, "data/bitloading_src.char")
        log_to_file(self, power_src, "data/power_src.cmplx")

    ## GUI probe output
    zmq_probe_bitloading = zeromq.pub_sink(gr.sizeof_char,dsubc, "tcp://*:4445")
    # also skip ID symbol bitloading with keep_one_in_n (side effect)
    # factor 2 for bitloading because we have two vectors per frame, one for id symbol and one for all payload/data symbols
    # factor config.frame_data_part for power because there is one vector per ofdm symbol per frame
    self.connect(bitloading_src, blocks.keep_one_in_n(gr.sizeof_char*dsubc,2*40), zmq_probe_bitloading)
    zmq_probe_power = zeromq.pub_sink(gr.sizeof_float,dsubc, "tcp://*:4444")
    #self.connect(power_src, blocks.keep_one_in_n(gr.sizeof_gr_complex*dsubc,40), blocks.complex_to_real(dsubc), zmq_probe_power)
    self.connect(power_src, blocks.keep_one_in_n(gr.sizeof_float*dsubc,40), zmq_probe_power)

    ## Workaround to avoid periodic structure
    seed(1)
    whitener_pn = [randint(0,1) for i in range(used_id_bits*rep_id_bits)]

    ## ID Encoder
    id_enc = self._id_encoder = repetition_encoder_sb(used_id_bits,rep_id_bits,whitener_pn)
    self.connect(id_src,id_enc)

    if options.log:
      id_enc_f = gr.char_to_float()
      self.connect(id_enc,id_enc_f)
      log_to_file(self, id_enc_f, "data/id_enc_out.float")

    ## Reference Data Source
    ber_ref_src = ber_reference_source(self._options)
    self.connect(id_src,(ber_ref_src,0))
    self.connect(bitcount_src,(ber_ref_src,1))

    if options.log:
      log_to_file(self, ber_ref_src, "data/ber_rec_src_tx.char")

    if options.log:
      log_to_file(self, btrig, "data/bitmap_trig.char")

    ## Bitmap Update Trigger for puncturing
    if not options.nopunct:
        bmaptrig_stream_puncturing = [1]+[0]*(config.frame_data_blocks/2-1)

        btrig_puncturing = self._bitmap_trigger_puncturing = blocks.vector_source_b(bmaptrig_stream_puncturing, True)
        bmapsrc_stream_puncturing = [1]*dsubc + [2]*dsubc
        bsrc_puncturing = self._bitmap_src_puncturing = blocks.vector_source_b(bmapsrc_stream_puncturing, True, dsubc)

    if options.log and options.coding and not options.nopunct:
      log_to_file(self, btrig_puncturing, "data/bitmap_trig_puncturing.char")

    ## Frame Trigger
    ftrig_stream = [1]+[0]*(config.frame_data_part-1)
    ftrig = self._frame_trigger = blocks.vector_source_b(ftrig_stream,True)

    ## Data Multiplexer
    # Input 0: control stream
    # Input 1: encoded ID stream
    # Inputs 2..n: data streams
    dmux = self._data_multiplexer = stream_controlled_mux_b()
    self.connect(mux_ctrl,(dmux,0))
    self.connect(id_enc,(dmux,1))
    
    
    if options.coding:
        fo=trellis.fsm(1,2,[91,121])       
        encoder = self._encoder = trellis.encoder_bb(fo,0)
        unpack = self._unpack = blocks.unpack_k_bits_bb(2)
        self.connect(ber_ref_src,encoder,unpack)
        
        if options.interleave:
            int_object=trellis.interleaver(2000,666)
            interlv = trellis.permutation(int_object.K(),int_object.INTER(),1,gr.sizeof_char)
        
        if not options.nopunct:
            bmaptrig_stream_puncturing = [1]+[0]*(config.frame_data_blocks/2-1)
            btrig_puncturing = self._bitmap_trigger_puncturing = blocks.vector_source_b(bmaptrig_stream_puncturing, True)
            puncturing = self._puncturing = puncture_bb(config.data_subcarriers)
            self.connect(bitloading_src,(puncturing,1))
            self.connect(self._bitmap_trigger_puncturing,(puncturing,2))
            self.connect(unpack,puncturing)
            last_block=puncturing
            
            if options.interleave:
                self.connect(last_block,interlv)
                last_block = interlv
            
            if options.benchmarking:
                self.connect(last_block,blocks.head(gr.sizeof_char, options.N),(dmux,2))
            else:
                self.connect(last_block,(dmux,2))
        else:
            if options.benchmarking:
                self.connect(unpack,blocks.head(gr.sizeof_char, options.N),(dmux,2))
            else:
                self.connect(unpack,(dmux,2))
        
    else:
        if options.benchmarking:
            self.connect(ber_ref_src,blocks.head(gr.sizeof_char, options.N),(dmux,2))
        else:
            self.connect(ber_ref_src,(dmux,2))
        

    if options.log:
      dmux_f = gr.char_to_float()
      self.connect(dmux,dmux_f)
      log_to_file(self, dmux_f, "data/dmux_out.float")

    ## Modulator
    mod = self._modulator = generic_mapper_bcv(config.data_subcarriers,config.coding, config.frame_data_part)
    self.connect(dmux,(mod,0))
    self.connect(bitloading_src,(mod,1))
    #log_to_file(self, mod, "data/mod_out.compl")

    if options.log:
      log_to_file(self, mod, "data/mod_out.compl")
      modi = blocks.complex_to_imag(config.data_subcarriers)
      modr = blocks.complex_to_real(config.data_subcarriers)
      self.connect(mod,modi)
      self.connect(mod,modr)
      log_to_file(self, modi, "data/mod_imag_out.float")
      log_to_file(self, modr, "data/mod_real_out.float")

    ## Power allocator
    pa = self._power_allocator = multiply_frame_fc(config.frame_data_part, config.data_subcarriers)
    self.connect(mod,(pa,0))
    self.connect(power_src,(pa,1))

    if options.log:
      log_to_file(self, pa, "data/pa_out.compl")

    # Standard Transmitter Parts

    ## Pilot subcarriers
    psubc = self._pilot_subcarrier_inserter = pilot_subcarrier_inserter()
    self.connect(pa,psubc)
    
    if options.log:
      log_to_file(self, psubc, "data/psubc_out.compl")

    ## Add virtual subcarriers
    if config.fft_length > config.subcarriers:
      vsubc = self._virtual_subcarrier_extender = \
              vector_padding_dc_null(config.subcarriers, config.fft_length,config.dc_null)
      self.connect(psubc,vsubc)
    else:
      vsubc = self._virtual_subcarrier_extender = psubc

    if options.log:
      log_to_file(self, vsubc, "data/vsubc_out.compl")

    ## IFFT, no window, block shift
    ifft = self._ifft = fft_blocks.fft_vcc(config.fft_length,False,[],True)
    self.connect(vsubc,ifft)

    if options.log:
      log_to_file(self, ifft, "data/ifft_out.compl")

    ## Pilot blocks (preambles)
    pblocks = self._pilot_block_inserter = pilot_block_inserter(5,False)
    self.connect( ifft, pblocks )

    if options.log:
      log_to_file(self, pblocks, "data/pilot_block_ins_out.compl")

    ## Cyclic Prefix
    cp = self._cyclic_prefixer = cyclic_prefixer(config.fft_length,
                                                 config.block_length)
    self.connect( pblocks, cp )

    lastblock = cp

    if options.log:
      log_to_file(self, cp, "data/cp_out.compl")

    #Digital Amplifier for resource allocation
    #if not options.coding:
    rep = blocks.repeat(gr.sizeof_gr_complex, config.frame_length * config.block_length)
    amp = blocks.multiply_cc()
    self.connect( lastblock, (amp,0) )
    self.connect((self.allocation_src,3), rep , (amp,1) )
    lastblock = amp


    ## Digital Amplifier
    #amp = self._amplifier = gr.multiply_const_cc(1)
    amp = self._amplifier = ofdm.multiply_const_ccf( 1.0 )
    self.connect( lastblock, amp )
    self.set_rms_amplitude(rms_amp)

    if options.log:
      log_to_file(self, amp, "data/amp_tx_out.compl")



    ## Tx parameters
    bandwidth = options.bandwidth or 2e6
    bits = 8*config.data_subcarriers*config.frame_data_blocks # max. QAM256
    samples_per_frame = config.frame_length*config.block_length
    tb = samples_per_frame/bandwidth
    # set dummy carrier frequency if none available due to baseband mode
    if(options.tx_freq is None):
        options.tx_freq = 0.0
    self.tx_parameters = {'carrier_frequency':options.tx_freq/1e9,'fft_size':config.fft_length, 'cp_size':config.cp_length \
                          , 'subcarrier_spacing':options.bandwidth/config.fft_length/1e3 \
                          , 'data_subcarriers':config.data_subcarriers, 'bandwidth':options.bandwidth/1e6 \
                          , 'frame_length':config.frame_length  \
                          , 'symbol_time':(config.cp_length + config.fft_length)/options.bandwidth*1e6, 'max_data_rate':(bits/tb)/1e6}

    ## Setup Output
    self.connect(amp,self)

    # Display some information about the setup
    if config._verbose:
      self._print_verbage()
コード例 #9
0
    def __init__(self, fft_length, block_length, block_header, range, options):
        gr.hier_block2.__init__(
            self, "integer_fo_estimator",
            gr.io_signature3(3, 3, gr.sizeof_gr_complex, gr.sizeof_float,
                             gr.sizeof_char),
            gr.io_signature2(3, 3, gr.sizeof_float, gr.sizeof_char))

        raise NotImplementedError, "Obsolete class"

        self._range = range

        # threshold after integer part frequency offset estimation
        # if peak value below threshold, assume false triggering
        self._thr_lo = 0.4  #0.19 # empirically found threshold. see ioe_metric.float
        self._thr_hi = 0.4  #0.2

        # stuff to be removed after bugfix for hierblock2s
        self.input = gr.kludge_copy(gr.sizeof_gr_complex)
        self.time_sync = gr.kludge_copy(gr.sizeof_char)
        self.epsilon = (self, 1)
        self.connect((self, 0), self.input)
        self.connect((self, 2), self.time_sync)

        delay(gr.sizeof_char, block_header.schmidl_fine_sync[0] * block_length)

        # sample ofdm symbol (preamble 1 and 2)
        sampler_symbol1 = vector_sampler(gr.sizeof_gr_complex, fft_length)
        sampler_symbol2 = vector_sampler(gr.sizeof_gr_complex, fft_length)
        time_delay1 = delay(gr.sizeof_char,
                            block_length * block_header.schmidl_fine_sync[1])
        self.connect(self.input, (sampler_symbol1, 0))
        self.connect(self.input, (sampler_symbol2, 0))
        if block_header.schmidl_fine_sync[0] > 0:
            time_delay0 = delay(
                gr.sizeof_char,
                block_length * block_header.schmidl_fine_sync[0])
            self.connect(self.time_sync, time_delay0, (sampler_symbol1, 1))
        else:
            self.connect(self.time_sync, (sampler_symbol1, 1))
        self.connect(self.time_sync, time_delay1, (sampler_symbol2, 1))

        # negative fractional frequency offset estimate
        epsilon = gr.multiply_const_ff(-1.0)
        self.connect(self.epsilon, epsilon)

        # compensate for fractional frequency offset on per symbol base
        #  freq_shift: vector length, modulator sensitivity
        #  freq_shift third input: reset phase accumulator

        # symbol/preamble 1
        freq_shift_sym1 = frequency_shift_vcc(fft_length, 1.0 / fft_length)
        self.connect(sampler_symbol1, (freq_shift_sym1, 0))
        self.connect(epsilon, (freq_shift_sym1, 1))
        self.connect(gr.vector_source_b([1], True), (freq_shift_sym1, 2))

        # symbol/preamble 2
        freq_shift_sym2 = frequency_shift_vcc(fft_length, 1.0 / fft_length)
        self.connect(sampler_symbol2, (freq_shift_sym2, 0))
        self.connect(epsilon, (freq_shift_sym2, 1))
        self.connect(gr.vector_source_b([1], True), (freq_shift_sym2, 2))

        # fourier transfrom on both preambles
        fft_sym1 = gr.fft_vcc(fft_length, True, [],
                              True)  # Forward + Blockshift
        fft_sym2 = gr.fft_vcc(fft_length, True, [],
                              True)  # Forward + Blockshift

        # calculate schmidl's metric for estimation of freq. offset's integer part
        assert (hasattr(block_header, "schmidl_fine_sync"))
        pre1 = block_header.pilotsym_fd[block_header.schmidl_fine_sync[0]]
        pre2 = block_header.pilotsym_fd[block_header.schmidl_fine_sync[1]]
        diff_pn = concatenate(
            [[conjugate(math.sqrt(2) * pre2[2 * i] / pre1[2 * i]), 0.0j]
             for i in arange(len(pre1) / 2)])
        cfo_estimator = schmidl_cfo_estimator(fft_length, len(pre1),
                                              self._range, diff_pn)
        self.connect(freq_shift_sym1, fft_sym1,
                     (cfo_estimator, 0))  # preamble 1
        self.connect(freq_shift_sym2, fft_sym2,
                     (cfo_estimator, 1))  # preamble 2

        # search for maximum and its argument in interval [-range .. +range]
        #arg_max = arg_max_vff(2*self._range + 1)
        arg_max_s = gr.argmax_fs(2 * self._range + 1)
        arg_max = gr.short_to_float()
        ifo_max = gr.max_ff(2 * self._range + 1)  # vlen
        ifo_estimate = gr.add_const_ff(-self._range)
        self.connect(cfo_estimator, arg_max_s, arg_max, ifo_estimate)
        self.connect(cfo_estimator, ifo_max)
        self.connect((arg_max_s, 1), gr.null_sink(gr.sizeof_short))

        # threshold maximal value
        ifo_threshold = gr.threshold_ff(self._thr_lo, self._thr_hi, 0.0)
        ifo_thr_f2b = gr.float_to_char()
        self.connect(ifo_max, ifo_threshold, ifo_thr_f2b)

        # gating the streams ifo_estimate (integer part) and epsilon (frac. part)
        # if the metric's peak value was above the chosen threshold, assume to have
        # found a new burst. peak value below threshold results in blocking the
        # streams
        self.gate = gate_ff()
        self.connect(ifo_thr_f2b, (self.gate, 0))  # threshold stream
        self.connect(ifo_estimate, (self.gate, 1))
        self.connect(epsilon, (self.gate, 2))

        # peak filtering
        # resynchronize and suppress peaks that didn't match a preamble
        filtered_time_sync = peak_resync_bb(True)  # replace
        self.connect(self.time_sync, (filtered_time_sync, 0))
        self.connect(ifo_thr_f2b, (filtered_time_sync, 1))

        # find complete estimation for frequency offset
        # add together fractional and integer part
        freq_offset = gr.add_ff()
        self.connect((self.gate, 1), gr.multiply_const_ff(-1.0),
                     (freq_offset, 0))  # integer offset
        self.connect((self.gate, 2), (freq_offset, 1))  # frac offset

        # output connections
        self.connect(freq_offset, (self, 0))
        self.connect(filtered_time_sync, (self, 1))
        self.connect((self.gate, 0), (self, 2))  # used for frame trigger

        #########################################
        # debugging
        if options.log:
            self.epsilon2_sink = gr.vector_sink_f()
            self.connect(epsilon, self.epsilon2_sink)

            self.connect(
                cfo_estimator,
                gr.file_sink(gr.sizeof_float * (self._range * 2 + 1),
                             "data/ioe_metric.float"))

            # output joint stream
            preamble_stream = gr.streams_to_vector(
                fft_length * gr.sizeof_gr_complex, 2)
            self.connect(fft_sym1, (preamble_stream, 0))
            self.connect(fft_sym2, (preamble_stream, 1))
            self.connect(
                preamble_stream,
                gr.file_sink(gr.sizeof_gr_complex * 2 * fft_length,
                             "data/preambles.compl"))

            # output, preambles before and after correction, magnitude and complex spectrum
            self.connect(
                sampler_symbol1, gr.fft_vcc(fft_length, True, [], True),
                gr.file_sink(gr.sizeof_gr_complex * fft_length,
                             "data/pre1_bef.compl"))
            self.connect(
                sampler_symbol1, gr.fft_vcc(fft_length, True, [], True),
                gr.complex_to_mag(fft_length),
                gr.file_sink(gr.sizeof_float * fft_length,
                             "data/pre1_bef.float"))
            self.connect(
                sampler_symbol2, gr.fft_vcc(fft_length, True, [], True),
                gr.file_sink(gr.sizeof_gr_complex * fft_length,
                             "data/pre2_bef.compl"))
            self.connect(
                sampler_symbol2, gr.fft_vcc(fft_length, True, [], True),
                gr.complex_to_mag(fft_length),
                gr.file_sink(gr.sizeof_float * fft_length,
                             "data/pre2_bef.float"))
            self.connect(
                freq_shift_sym1, gr.fft_vcc(fft_length, True, [], True),
                gr.file_sink(gr.sizeof_gr_complex * fft_length,
                             "data/pre1.compl"))
            self.connect(
                freq_shift_sym1, gr.fft_vcc(fft_length, True, [], True),
                gr.complex_to_mag(fft_length),
                gr.file_sink(gr.sizeof_float * fft_length, "data/pre1.float"))
            self.connect(
                freq_shift_sym2, gr.fft_vcc(fft_length, True, [], True),
                gr.file_sink(gr.sizeof_gr_complex * fft_length,
                             "data/pre2.compl"))
            self.connect(
                freq_shift_sym2, gr.fft_vcc(fft_length, True, [], True),
                gr.complex_to_mag(fft_length),
                gr.file_sink(gr.sizeof_float * fft_length, "data/pre2.float"))

            # calculate epsilon from corrected source to check function
            test_cp = cyclic_prefixer(fft_length, block_length)
            test_eps = foe(fft_length)
            self.connect(freq_shift_sym1, test_cp, test_eps,
                         gr.file_sink(gr.sizeof_float, "data/eps_after.float"))

        try:
            gr.hier_block.update_var_names(self, "ifo_estimator", vars())
            gr.hier_block.update_var_names(self, "ifo_estimator", vars(self))
        except:
            pass
コード例 #10
0
  def __init__(self, options):
    gr.hier_block2.__init__(self, "transmit_path",
        gr.io_signature(0,0,0),
        gr.io_signature(2,2,gr.sizeof_gr_complex))

    common_options.defaults(options)

    config = self.config = station_configuration()

    config.data_subcarriers    = options.subcarriers
    config.cp_length           = options.cp_length
    config.frame_data_blocks   = options.data_blocks
    config._verbose            = options.verbose
    config.fft_length          = options.fft_length
    config.training_data       = default_block_header(config.data_subcarriers,
                                          config.fft_length,options)
    config.tx_station_id       = options.station_id
    config.coding              = options.coding
    

    if config.tx_station_id is None:
      raise SystemError, "Station ID not set"

    config.frame_id_blocks     = 1 # FIXME

    # digital rms amplitude sent to USRP
    rms_amp                    = options.rms_amplitude
    self._options              = copy.copy(options)

    self.servants = [] # FIXME

    config.block_length = config.fft_length + config.cp_length
    config.frame_data_part = config.frame_data_blocks + config.frame_id_blocks
    config.frame_length = config.frame_data_part + \
                          config.training_data.no_pilotsyms
    config.subcarriers = config.data_subcarriers + \
                         config.training_data.pilot_subcarriers
    config.virtual_subcarriers = config.fft_length - config.subcarriers

    # default values if parameters not set
    if rms_amp is None:
      rms_amp = math.sqrt(config.subcarriers)
    config.rms_amplitude = rms_amp

    # check some bounds
    if config.fft_length < config.subcarriers:
      raise SystemError, "Subcarrier number must be less than FFT length"
    if config.fft_length < config.cp_length:
      raise SystemError, "Cyclic prefix length must be less than FFT length"

    ## shortcuts
    blen = config.block_length
    flen = config.frame_length
    dsubc = config.data_subcarriers
    vsubc = config.virtual_subcarriers


    # ------------------------------------------------------------------------ #
    # Adaptive Transmitter Concept

    used_id_bits = config.used_id_bits = 8 #TODO: no constant in source code
    rep_id_bits = config.rep_id_bits = config.data_subcarriers/used_id_bits #BPSK
    if config.data_subcarriers % used_id_bits <> 0:
      raise SystemError,"Data subcarriers need to be multiple of %d" % (used_id_bits)


    ## Control Part
    if options.debug:
      self._control = ctrl = static_tx_control(options)
      print "Statix TX Control used"
    else:
      self._control = ctrl = corba_tx_control(options)
      print "CORBA TX Control used"

    id_src = (ctrl,0)
    mux_src = (ctrl,1)
    map_src = self._map_src = (ctrl,2)
    pa_src = (ctrl,3)


    if options.log:
      id_src_f = gr.short_to_float()
      self.connect(id_src,id_src_f)
      log_to_file(self, id_src_f, "data/id_src_out.float")

      mux_src_f = gr.short_to_float()
      self.connect(mux_src,mux_src_f)
      log_to_file(self, mux_src_f, "data/mux_src_out.float")

      map_src_s = blocks.vector_to_stream(gr.sizeof_char,config.data_subcarriers)
      map_src_f = gr.char_to_float()
      self.connect(map_src,map_src_s,map_src_f)
      ##log_to_file(self, map_src_f, "data/map_src.float")

      ##log_to_file(self, pa_src, "data/pa_src_out.float")

    ## Workaround to avoid periodic structure
    seed(1)
    whitener_pn = [randint(0,1) for i in range(used_id_bits*rep_id_bits)]

    ## ID Encoder
    id_enc = self._id_encoder = repetition_encoder_sb(used_id_bits,rep_id_bits,whitener_pn)
    self.connect(id_src,id_enc)

    if options.log:
      id_enc_f = gr.char_to_float()
      self.connect(id_enc,id_enc_f)
      log_to_file(self, id_enc_f, "data/id_enc_out.float")

    ## Bitmap Update Trigger
    # TODO
    #bmaptrig_stream = concatenate([[1, 2],[0]*(config.frame_data_part-7)])
    bmaptrig_stream = concatenate([[1, 1],[0]*(config.frame_data_part-2)])
    print"bmaptrig_stream = ",bmaptrig_stream
    btrig = self._bitmap_trigger = blocks.vector_source_b(bmaptrig_stream.tolist(), True)
    if options.log:
      log_to_file(self, btrig, "data/bitmap_trig.char")
      
    ## Bitmap Update Trigger for puncturing
    # TODO
    if not options.nopunct:
        #bmaptrig_stream_puncturing = concatenate([[1],[0]*(config.frame_data_part-2)])
        bmaptrig_stream_puncturing = concatenate([[1],[0]*(config.frame_data_blocks/2-1)])
        
        btrig_puncturing = self._bitmap_trigger_puncturing = blocks.vector_source_b(bmaptrig_stream_puncturing.tolist(), True)
        bmapsrc_stream_puncturing = concatenate([[1]*dsubc,[2]*dsubc])
        bsrc_puncturing = self._bitmap_src_puncturing = blocks.vector_source_b(bmapsrc_stream_puncturing.tolist(), True, dsubc)
        
    if options.log and options.coding and not options.nopunct:
      log_to_file(self, btrig_puncturing, "data/bitmap_trig_puncturing.char")

    ## Frame Trigger
    # TODO
    ftrig_stream = concatenate([[1],[0]*(config.frame_data_part-1)])
    ftrig = self._frame_trigger = blocks.vector_source_b(ftrig_stream.tolist(),True)

    ## Data Multiplexer
    # Input 0: control stream
    # Input 1: encoded ID stream
    # Inputs 2..n: data streams
    dmux = self._data_multiplexer = stream_controlled_mux_b()
    self.connect(mux_src,(dmux,0))
    self.connect(id_enc,(dmux,1))
                      
    self._data_multiplexer_nextport = 2

    if options.log:
      dmux_f = gr.char_to_float()
      self.connect(dmux,dmux_f)
      log_to_file(self, dmux_f, "data/dmux_out.float")
      
    ## Modulator
    mod = self._modulator = generic_mapper_bcv(config.data_subcarriers,options.coding)



    self.connect(dmux,(mod,0))
    self.connect(map_src,(mod,1))
    self.connect(btrig,(mod,2))
    
    if options.log:
      log_to_file(self, mod, "data/mod_out.compl")
      modi = gr.complex_to_imag(config.data_subcarriers)
      modr = gr.complex_to_real(config.data_subcarriers)
      self.connect(mod,modi)
      self.connect(mod,modr)
      log_to_file(self, modi, "data/mod_imag_out.float")
      log_to_file(self, modr, "data/mod_real_out.float")



    ## Power allocator
    if options.debug:

      ## static
      pa = self._power_allocator = power_allocator(config.data_subcarriers)
      self.connect(mod,(pa,0))
      self.connect(pa_src,(pa,1))

    else:

      ## with CORBA control event channel
      ns_ip = ctrl.ns_ip
      ns_port = ctrl.ns_port
      evchan = ctrl.evchan
      pa = self._power_allocator = corba_power_allocator(dsubc, \
          evchan, ns_ip, ns_port, True)

      self.connect(mod,(pa,0))
      self.connect(id_src,(pa,1))
      self.connect(ftrig,(pa,2))

    if options.log:
      log_to_file(self, pa, "data/pa_out.compl")



    ## Pilot subcarriers
    psubc = self._pilot_subcarrier_inserter = pilot_subcarrier_inserter()
    self.connect( pa ,psubc )
        
    pilot_subc = config.training_data.shifted_pilot_tones;
    print "pilot_subc", pilot_subc
    stc = stc_encoder( config.subcarriers, config.frame_data_blocks,  pilot_subc )
    
    self.connect(psubc, stc)
    
    if options.log:
      log_to_file(self, psubc, "data/psubc_out.compl")
      log_to_file(self, psubc_2, "data/psubc2_out.compl")
      log_to_file(self, pa, "data/pa.compl")
      log_to_file(self, ( stc, 0 ), "data/stc_0.compl")
      log_to_file(self, ( stc, 1 ), "data/stc_1.compl")

    ## Add virtual subcarriers
    if config.fft_length > config.subcarriers:
      vsubc = self._virtual_subcarrier_extender = \
              vector_padding(config.subcarriers, config.fft_length)
      self.connect(stc,vsubc)
      vsubc_2 = self._virtual_subcarrier_extender_2 = \
              vector_padding(config.subcarriers, config.fft_length)
      self.connect((stc,1),vsubc_2)
    else:
      vsubc = self._virtual_subcarrier_extender = psubc
      vsubc_2 = self._virtual_subcarrier_extender_2 = psubc_2
      
    log_to_file(self, psubc, "data/psubc.compl")
    log_to_file(self, stc, "data/stc1.compl")
    log_to_file(self, (stc,1), "data/stc2.compl")
    if options.log:
      log_to_file(self, vsubc, "data/vsubc_out.compl")
      log_to_file(self, vsubc_2, "data/vsubc2_out.compl")

    
    ## IFFT, no window, block shift
    ifft = self._ifft = fft_blocks.fft_vcc(config.fft_length,False,[],True)
    self.connect(vsubc,ifft)
    ifft_2 = self._ifft_2 = fft_blocks.fft_vcc(config.fft_length,False,[],True)
    self.connect(vsubc_2,ifft_2)

    if options.log:
      log_to_file(self, ifft, "data/ifft_out.compl")
      log_to_file(self, ifft_2, "data/ifft2_out.compl")


    ## Pilot blocks (preambles)
    pblocks = self._pilot_block_inserter = pilot_block_inserter(1, False)
    self.connect( ifft, pblocks )
    pblocks_2 = self._pilot_block_inserter_2 = pilot_block_inserter( 2, False)
    self.connect( ifft_2, pblocks_2 )
    
    if options.log:
      log_to_file(self, pblocks, "data/pilot_block_ins_out.compl")
      log_to_file(self, pblocks_2, "data/pilot_block_ins2_out.compl")
    
    ## Cyclic Prefix
    cp = self._cyclic_prefixer = cyclic_prefixer(config.fft_length,
                                                 config.block_length)
    self.connect( pblocks, cp )
    cp_2 = self._cyclic_prefixer_2 = cyclic_prefixer(config.fft_length,
                                                 config.block_length)
    self.connect( pblocks_2, cp_2 )
    
    lastblock = cp
    lastblock_2 = cp_2

    
    if options.log:
      log_to_file(self, cp, "data/cp_out.compl")
      log_to_file(self, cp_2, "data/cp2_out.compl")


    if options.cheat:
      ## Artificial Channel
      # kept to compare with previous system
      achan_ir = concatenate([[1.0],[0.0]*(config.cp_length-1)])
      achan = self._artificial_channel = gr.fir_filter_ccc(1,achan_ir)
      self.connect( lastblock, achan )
      lastblock = achan
      achan_2 = self._artificial_channel_2 = gr.fir_filter_ccc(1,achan_ir)
      self.connect( lastblock_2, achan_2 )
      lastblock_2 = achan_2


    ## Digital Amplifier
    amp = self._amplifier = ofdm.multiply_const_ccf( 1.0/math.sqrt(2) )
    self.connect( lastblock, amp )
    amp_2 = self._amplifier_2 = ofdm.multiply_const_ccf( 1.0/math.sqrt(2) )
    self.connect( lastblock_2, amp_2 )
    self.set_rms_amplitude(rms_amp)
    
    if options.log:
      log_to_file(self, amp, "data/amp_tx_out.compl")
      log_to_file(self, amp_2, "data/amp_tx2_out.compl")

    ## Setup Output
    self.connect(amp,(self,0))
    self.connect(amp_2,(self,1))

    # ------------------------------------------------------------------------ #

    # Display some information about the setup
    if config._verbose:
      self._print_verbage()