def __init__(self, options):
gr.top_block.__init__(self)
if options.freq is not None:
u = usrp2.source(options)
elif options.infile is not None:
u = gr.file_source(gr.sizeof_gr_complex, options.infile)
else:
import sys
sys.stderr.write("--freq or --infile must be specified\n")
raise SystemExit
self.scope = None
if options.outfile is not None:
rx = gr.file_sink(gr.sizeof_gr_complex, options.outfile)
else:
rx = qam_rxtx.RX(options)
framebytes = rx.framebytes
if options.rxdata is not None:
if options.rxdata == '-':
self.connect(
rx,
gr.file_descriptor_sink(gr.sizeof_char * framebytes,
1))
else:
self.connect(
rx,
gr.file_sink(gr.sizeof_char * framebytes,
options.rxdata))
if options.berdata is not None:
# select one of the ber modes
ber = qam_rxtx.BER(framebytes, 100, mode=options.bermode)
data = qam_rxtx.make_data(framebytes)
self.connect(rx, (ber, 0))
self.connect(data, (ber, 1))
if options.berdata == '-':
# print it out
msgq = gr.msg_queue(16)
self.connect(ber,
gr.message_sink(gr.sizeof_float, msgq, True))
self.watcher = ofdm_rxtx.queue_watcher(msgq)
elif options.berdata == '.':
import scope
# scope it out
self.scope = scope.scope(self, ber, 'Frame BER')
else:
self.connect(
ber, gr.file_sink(gr.sizeof_float, options.berdata))
else:
pass
#self.connect(rx, gr.null_sink(symbol_size)) # XXX do we still need this?
self.connect(u, rx)
def __init__(self, options):
gr.top_block.__init__(self)
if options.freq is not None:
u = usrp2.source(options)
elif options.infile is not None:
u = gr.file_source(gr.sizeof_gr_complex, options.infile)
else:
import sys
sys.stderr.write("--freq or --infile must be specified\n")
raise SystemExit
self.scope = None
if options.outfile is not None:
rx = gr.file_sink(gr.sizeof_gr_complex, options.outfile)
else:
rx = qam_rxtx.RX(options)
framebytes = rx.framebytes
if options.rxdata is not None:
if options.rxdata == '-':
self.connect(rx, gr.file_descriptor_sink(gr.sizeof_char * framebytes, 1))
else:
self.connect(rx, gr.file_sink(gr.sizeof_char * framebytes, options.rxdata))
if options.berdata is not None:
# select one of the ber modes
ber = qam_rxtx.BER(framebytes, 100, mode=options.bermode)
data = qam_rxtx.make_data(framebytes)
self.connect(rx, (ber,0))
self.connect(data, (ber,1))
if options.berdata == '-':
# print it out
msgq = gr.msg_queue(16)
self.connect(ber, gr.message_sink(gr.sizeof_float, msgq, True))
self.watcher = ofdm_rxtx.queue_watcher(msgq)
elif options.berdata == '.':
import scope
# scope it out
self.scope = scope.scope(self, ber, 'Frame BER')
else:
self.connect(ber, gr.file_sink(gr.sizeof_float, options.berdata))
else:
pass
#self.connect(rx, gr.null_sink(symbol_size)) # XXX do we still need this?
self.connect(u, rx)
def __init__(self, options):
gr.top_block.__init__(self)
if options.rx_freq is not None:
u = uhd_receiver(options.args, options.bandwidth, options.rx_freq,
options.rx_gain, options.spec, options.antenna,
options.verbose)
elif options.infile is not None:
u = gr.file_source(gr.sizeof_gr_complex, options.infile)
else:
import sys
sys.stderr.write("--freq or --infile must be specified\n")
raise SystemExit
self.scope = None
if options.outfile is not None:
rx = gr.file_sink(gr.sizeof_gr_complex, options.outfile)
else:
rx = ofdm_rxtx.RX(options)
data_tones = rx.params.data_tones
if options.rxdata is not None:
if options.rxdata == '.':
import scope
# scope it out
rxs = gr.vector_to_stream(gr.sizeof_gr_complex, data_tones)
self.connect(rx, rxs)
self.scope = scope.scope(self,
rxs,
'Frame SNR',
isComplex=True)
else:
if options.char > 0:
# rail and scale
self.connect(
rx,
gr.vector_to_stream(gr.sizeof_float,
data_tones * 2),
gr.multiply_const_ff(128.0 * (2**0.5) /
options.char),
gr.rail_ff(-128.0, 127.0), gr.float_to_char(),
gr.file_sink(gr.sizeof_char, options.rxdata))
else:
self.connect(
rx,
gr.file_sink(data_tones * gr.sizeof_gr_complex,
options.rxdata))
if options.snrdata is not None:
# select one of the snr modes
snr = ofdm_rxtx.SNR(rx.params.data_tones,
options.size,
mode=options.snrmode)
if options.char > 0:
# NOTE: we use repeat, assuming the file is long enough or properly aligned
data = gr.stream_to_vector(gr.sizeof_float, data_tones * 2)
self.connect(
gr.file_source(gr.sizeof_char,
options.txdata,
repeat=True), gr.char_to_float(),
gr.multiply_const_ff(options.char * (2**-0.5) / 128.0),
data)
else:
data = ofdm_rxtx.make_data(rx.params.data_tones,
options.size, options.txdata)
self.connect(rx, (snr, 0))
self.connect(data, (snr, 1))
if options.snrdata == '-':
# print it out
msgq = gr.msg_queue(16)
self.connect(snr,
gr.message_sink(gr.sizeof_float, msgq, True))
self.watcher = ofdm_rxtx.queue_watcher(msgq)
elif options.snrdata == '.':
import scope
# scope it out
self.scope = scope.scope(self, snr, 'Frame SNR')
else:
self.connect(
snr, gr.file_sink(gr.sizeof_float, options.snrdata))
else:
pass
#self.connect(rx, gr.null_sink(symbol_size)) # XXX do we still need this?
self.connect(u, rx)
def __init__(self, options):
gr.top_block.__init__(self)
if options.rx_freq is not None:
u = uhd_receiver(options.args,
options.bandwidth,
options.rx_freq, options.rx_gain,
options.spec, options.antenna,
options.verbose)
elif options.infile is not None:
u = gr.file_source(gr.sizeof_gr_complex, options.infile)
else:
import sys
sys.stderr.write("--freq or --infile must be specified\n")
raise SystemExit
self.scope = None
if options.outfile is not None:
rx = gr.file_sink(gr.sizeof_gr_complex, options.outfile)
else:
rx = ofdm_rxtx.RX(options)
data_tones = rx.params.data_tones
if options.rxdata is not None:
if options.rxdata == '.':
import scope
# scope it out
rxs = gr.vector_to_stream(gr.sizeof_gr_complex, data_tones)
self.connect(rx, rxs)
self.scope = scope.scope(self, rxs, 'Frame SNR', isComplex=True)
else:
if options.char > 0:
# rail and scale
self.connect(rx,
gr.vector_to_stream(gr.sizeof_float, data_tones * 2),
gr.multiply_const_ff(128.0 * (2**0.5)/ options.char),
gr.rail_ff(-128.0, 127.0),
gr.float_to_char(),
gr.file_sink(gr.sizeof_char, options.rxdata))
else:
self.connect(rx, gr.file_sink(data_tones * gr.sizeof_gr_complex, options.rxdata))
if options.snrdata is not None:
# select one of the snr modes
snr = ofdm_rxtx.SNR(rx.params.data_tones, options.size, mode=options.snrmode)
if options.char > 0:
# NOTE: we use repeat, assuming the file is long enough or properly aligned
data = gr.stream_to_vector(gr.sizeof_float, data_tones * 2)
self.connect(gr.file_source(gr.sizeof_char, options.txdata, repeat=True),
gr.char_to_float(),
gr.multiply_const_ff(options.char * (2**-0.5) / 128.0),
data)
else:
data = ofdm_rxtx.make_data(rx.params.data_tones, options.size, options.txdata)
self.connect(rx, (snr,0))
self.connect(data, (snr,1))
if options.snrdata == '-':
# print it out
msgq = gr.msg_queue(16)
self.connect(snr, gr.message_sink(gr.sizeof_float, msgq, True))
self.watcher = ofdm_rxtx.queue_watcher(msgq)
elif options.snrdata == '.':
import scope
# scope it out
self.scope = scope.scope(self, snr, 'Frame SNR')
else:
self.connect(snr, gr.file_sink(gr.sizeof_float, options.snrdata))
else:
pass
#self.connect(rx, gr.null_sink(symbol_size)) # XXX do we still need this?
self.connect(u, rx)
