def createMask():
vertices = osg.Vec3Array()
vertices.push_back(osg.Vec3(-0.5, -0.5, 0.0))
vertices.push_back(osg.Vec3(0.5, -0.5, 0.0))
vertices.push_back(osg.Vec3(0.5, 0.5, 0.0))
vertices.push_back(osg.Vec3(-0.5, 0.5, 0.0))
geom = osg.Geometry()
geom.setVertexArray(vertices)
geom.addPrimitiveSet(osg.DrawArrays(GL_QUADS, 0, 4))
geode = osg.Geode()
geode.addDrawable(geom)
stencil = osg.Stencil()
stencil.setFunction(osg.Stencil.ALWAYS, 1, ~0u)
stencil.setOperation(osg.Stencil.KEEP, osg.Stencil.KEEP, osg.Stencil.REPLACE)
ss = geode.getOrCreateStateSet()
ss.setAttributeAndModes(stencil,
osg.StateAttribute.ON | osg.StateAttribute.OVERRIDE)
ss.setAttribute(osg.ColorMask(False, False, False, False),
osg.StateAttribute.ON | osg.StateAttribute.OVERRIDE)
return geode
def createGeometry():
vertices = osg.Vec3Array()
vertices.push_back(osg.Vec3(-1.0, -1.0, 0.0))
vertices.push_back(osg.Vec3(1.0, -1.0, 0.0))
vertices.push_back(osg.Vec3(1.0, 1.0, 0.0))
vertices.push_back(osg.Vec3(-1.0, 1.0, 0.0))
geom = osg.Geometry()
geom.setVertexArray(vertices)
geom.addPrimitiveSet(osg.DrawArrays(GL_QUADS, 0, 4))
geode = osg.Geode()
geode.addDrawable(geom)
stencil = osg.Stencil()
stencil.setFunction(osg.Stencil.NOTEQUAL, 1, ~0u)
stencil.setOperation(osg.Stencil.KEEP, osg.Stencil.KEEP, osg.Stencil.KEEP)
ss = geode.getOrCreateStateSet()
ss.setAttributeAndModes(stencil,
osg.StateAttribute.ON | osg.StateAttribute.OVERRIDE)
return geode
def setupBin5(rootNode, mirror,z):
#// set up depth so all writing to depth goes to maximum depth.
depth = osg.Depth();
depth.setFunction(osg.Depth.ALWAYS);
stencil = osg.Stencil();
stencil.setFunction(osg.Stencil.EQUAL,1,4294967295);
stencil.setOperation(osg.Stencil.KEEP, osg.Stencil.KEEP, osg.Stencil.ZERO);
#// set up additive blending.
trans = osg.BlendFunc();
trans.setFunction(osg.BlendFunc.ONE,osg.BlendFunc.ONE);
statesetBin5 = createMirrorTexturedState("Images/tank.rgb");
statesetBin5.setRenderBinDetails(5,"RenderBin");
statesetBin5.setMode(osg.GL_CULL_FACE,osg.StateAttribute.OFF);
statesetBin5.setAttributeAndModes(stencil,osg.StateAttribute.ON);
statesetBin5.setAttributeAndModes(trans,osg.StateAttribute.ON);
statesetBin5.setAttribute(depth);
#// set up the mirror geode.
geode = osg.Geode();
geode.addDrawable(mirror);
geode.setStateSet(statesetBin5);
rootNode.addChild(geode);
def setupBin3(rootNode, mirror,z):
#// set up the stencil ops so that only operator on this mirrors stencil value.
stencil = osg.Stencil()
stencil.setFunction(osg.Stencil.EQUAL,1,4294967295);
stencil.setOperation(osg.Stencil.KEEP, osg.Stencil.KEEP, osg.Stencil.KEEP);
#// switch off the writing to the color bit planes.
colorMask = osg.ColorMask();
colorMask.setMask(False,False,False,False);
#// set up depth so all writing to depth goes to maximum depth.
depth = osg.Depth();
depth.setFunction(osg.Depth.ALWAYS);
depth.setRange(1.0,1.0);
statesetBin3 = osg.StateSet();
statesetBin3.setRenderBinDetails(3,"RenderBin");
statesetBin3.setMode(osg.GL_CULL_FACE,osg.StateAttribute.OFF);
statesetBin3.setAttributeAndModes(stencil,osg.StateAttribute.ON);
statesetBin3.setAttribute(colorMask);
statesetBin3.setAttribute(depth);
#// set up the mirror geode.
geode = osg.Geode();
geode.addDrawable(mirror);
geode.setStateSet(statesetBin3);
rootNode.addChild(geode);
def setupBin2(rootNode, model,z):
stencil = osg.Stencil();
stencil.setFunction(osg.Stencil.ALWAYS,0,4294967295);
stencil.setOperation(osg.Stencil.KEEP, osg.Stencil.KEEP, osg.Stencil.REPLACE);
statesetBin2 = osg.StateSet();
statesetBin2.setRenderBinDetails(2,"RenderBin");
statesetBin2.setAttributeAndModes(stencil,osg.StateAttribute.ON);
groupBin2 = osg.Group();
groupBin2.setStateSet(statesetBin2);
groupBin2.addChild(model);
rootNode.addChild(groupBin2);
def setupBin4(rootNode,model,z):
#// now create the 'reflection' of the loaded model by applying
#// create a Transform which flips the loaded model about the z axis
#// relative to the mirror node, the loadedModel is added to the
#// Transform so now appears twice in the scene, but is shared so there
#// is negligable memory overhead. Also use an osg.StateSet
#// attached to the Transform to override the face culling on the subgraph
#// to prevert an 'inside' out view of the reflected model.
#// set up the stencil ops so that only operator on this mirrors stencil value.
#// this clip plane removes any of the scene which when mirror would
#// poke through the mirror. However, this clip plane should really
#// flip sides once the eye point goes to the back of the mirror...
clipplane = osg.ClipPlane();
clipplane.setClipPlane(0.0,0.0,-1.0,z);
clipplane.setClipPlaneNum(0);
clipNode = osg.ClipNode();
clipNode.addClipPlane(clipplane);
dstate = clipNode.getOrCreateStateSet();
dstate.setRenderBinDetails(4,"RenderBin");
dstate.setMode(osg.GL_CULL_FACE,osg.StateAttribute.OVERRIDE|osg.StateAttribute.OFF);
stencil = osg.Stencil();
stencil.setFunction(osg.Stencil.EQUAL,1,4294967295);
stencil.setOperation(osg.Stencil.KEEP, osg.Stencil.KEEP, osg.Stencil.KEEP);
dstate.setAttributeAndModes(stencil,osg.StateAttribute.ON);
reverseMatrix = osg.MatrixTransform();
reverseMatrix.stateSet = dstate
reverseMatrix.preMult(osg.Matrix.translate(0.0,0.0,-z)*
osg.Matrix.scale(1.0,1.0,-1.0)*
osg.Matrix.translate(0.0,0.0,z));
reverseMatrix.addChild(model);
clipNode.addChild(reverseMatrix);
rootNode.addChild(clipNode);
def setupBin1(rootNode, mirror,z):
#// set up the stencil ops so that the stencil buffer get set at
#// the mirror plane
stencil = osg.Stencil();
stencil.setFunction(osg.Stencil.ALWAYS,1,4294967295)
stencil.setOperation(osg.Stencil.KEEP, osg.Stencil.KEEP, osg.Stencil.REPLACE);
#// switch off the writing to the color bit planes.
colorMask = osg.ColorMask();
colorMask.setMask(False,False,False,False);
statesetBin1 = osg.StateSet()
statesetBin1.setRenderBinDetails(1,"RenderBin");
statesetBin1.setMode(osg.GL_CULL_FACE,osg.StateAttribute.OFF);
statesetBin1.setAttributeAndModes(stencil,osg.StateAttribute.ON);
statesetBin1.setAttribute(colorMask);
#// set up the mirror geode.
geode = osg.Geode();
geode.addDrawable(mirror);
geode.setStateSet(statesetBin1);
rootNode.addChild(geode);
def createMirroredScene(model):
# calculate where to place the mirror according to the
# loaded models bounding sphere.
bs = model.getBound()
width_factor = 1.5
height_factor = 0.3
xMin = bs.center().x()-bs.radius()*width_factor
xMax = bs.center().x()+bs.radius()*width_factor
yMin = bs.center().y()-bs.radius()*width_factor
yMax = bs.center().y()+bs.radius()*width_factor
z = bs.center().z()-bs.radius()*height_factor
# create a textured, transparent node at the appropriate place.
mirror = createMirrorSurface(xMin,xMax,yMin,yMax,z)
rootNode = osg.MatrixTransform()
rootNode.setMatrix(osg.Matrix.rotate(osg.inDegrees(45.0),1.0,0.0,0.0))
# make sure that the global color mask exists.
rootColorMask = osg.ColorMask()
rootColorMask.setMask(True,True,True,True)
# set up depth to be inherited by the rest of the scene unless
# overrideen. this is overridden in bin 3.
rootDepth = osg.Depth()
rootDepth.setFunction(osg.Depth.LESS)
rootDepth.setRange(0.0,1.0)
rootStateSet = osg.StateSet()
rootStateSet.setAttribute(rootColorMask)
rootStateSet.setAttribute(rootDepth)
rootNode.setStateSet(rootStateSet)
# bin1 - set up the stencil values and depth for mirror.
# set up the stencil ops so that the stencil buffer get set at
# the mirror plane
stencil = osg.Stencil()
stencil.setFunction(osg.Stencil.ALWAYS,1,~0u)
stencil.setOperation(osg.Stencil.KEEP, osg.Stencil.KEEP, osg.Stencil.REPLACE)
# switch off the writing to the color bit planes.
colorMask = osg.ColorMask()
colorMask.setMask(False,False,False,False)
statesetBin1 = osg.StateSet()
statesetBin1.setRenderBinDetails(1,"RenderBin")
statesetBin1.setMode(GL_CULL_FACE,osg.StateAttribute.OFF)
statesetBin1.setAttributeAndModes(stencil,osg.StateAttribute.ON)
statesetBin1.setAttribute(colorMask)
# set up the mirror geode.
geode = osg.Geode()
geode.addDrawable(mirror)
geode.setStateSet(statesetBin1)
rootNode.addChild(geode)
# bin one - draw scene without mirror or reflection, unset
# stencil values where scene is infront of mirror and hence
# occludes the mirror.
stencil = osg.Stencil()
stencil.setFunction(osg.Stencil.ALWAYS,0,~0u)
stencil.setOperation(osg.Stencil.KEEP, osg.Stencil.KEEP, osg.Stencil.REPLACE)
statesetBin2 = osg.StateSet()
statesetBin2.setRenderBinDetails(2,"RenderBin")
statesetBin2.setAttributeAndModes(stencil,osg.StateAttribute.ON)
groupBin2 = osg.Group()
groupBin2.setStateSet(statesetBin2)
groupBin2.addChild(model)
rootNode.addChild(groupBin2)
# bin3 - set up the depth to the furthest depth value
# set up the stencil ops so that only operator on this mirrors stencil value.
stencil = osg.Stencil()
stencil.setFunction(osg.Stencil.EQUAL,1,~0u)
stencil.setOperation(osg.Stencil.KEEP, osg.Stencil.KEEP, osg.Stencil.KEEP)
# switch off the writing to the color bit planes.
colorMask = osg.ColorMask()
colorMask.setMask(False,False,False,False)
# set up depth so all writing to depth goes to maximum depth.
depth = osg.Depth()
depth.setFunction(osg.Depth.ALWAYS)
depth.setRange(1.0,1.0)
statesetBin3 = osg.StateSet()
statesetBin3.setRenderBinDetails(3,"RenderBin")
statesetBin3.setMode(GL_CULL_FACE,osg.StateAttribute.OFF)
statesetBin3.setAttributeAndModes(stencil,osg.StateAttribute.ON)
statesetBin3.setAttribute(colorMask)
statesetBin3.setAttribute(depth)
# set up the mirror geode.
geode = osg.Geode()
geode.addDrawable(mirror)
geode.setStateSet(statesetBin3)
rootNode.addChild(geode)
# bin4 - draw the reflection.
# now create the 'reflection' of the loaded model by applying
# create a Transform which flips the loaded model about the z axis
# relative to the mirror node, the loadedModel is added to the
# Transform so now appears twice in the scene, but is shared so there
# is negligable memory overhead. Also use an osg.StateSet
# attached to the Transform to override the face culling on the subgraph
# to prevert an 'inside' out view of the reflected model.
# set up the stencil ops so that only operator on this mirrors stencil value.
# this clip plane removes any of the scene which when mirror would
# poke through the mirror. However, this clip plane should really
# flip sides once the eye point goes to the back of the mirror...
clipplane = osg.ClipPlane()
clipplane.setClipPlane(0.0,0.0,-1.0,z)
clipplane.setClipPlaneNum(0)
clipNode = osg.ClipNode()
clipNode.addClipPlane(clipplane)
dstate = clipNode.getOrCreateStateSet()
dstate.setRenderBinDetails(4,"RenderBin")
dstate.setMode(GL_CULL_FACE,osg.StateAttribute.OVERRIDE|osg.StateAttribute.OFF)
stencil = osg.Stencil()
stencil.setFunction(osg.Stencil.EQUAL,1,~0u)
stencil.setOperation(osg.Stencil.KEEP, osg.Stencil.KEEP, osg.Stencil.KEEP)
dstate.setAttributeAndModes(stencil,osg.StateAttribute.ON)
reverseMatrix = osg.MatrixTransform()
reverseMatrix.setStateSet(dstate)
reverseMatrix.preMult(osg.Matrix.translate(0.0,0.0,-z)*
osg.Matrix.scale(1.0,1.0,-1.0)*
osg.Matrix.translate(0.0,0.0,z))
reverseMatrix.addChild(model)
clipNode.addChild(reverseMatrix)
rootNode.addChild(clipNode)
# bin5 - draw the textured mirror and blend it with the reflection.
# set up depth so all writing to depth goes to maximum depth.
depth = osg.Depth()
depth.setFunction(osg.Depth.ALWAYS)
stencil = osg.Stencil()
stencil.setFunction(osg.Stencil.EQUAL,1,~0u)
stencil.setOperation(osg.Stencil.KEEP, osg.Stencil.KEEP, osg.Stencil.ZERO)
# set up additive blending.
trans = osg.BlendFunc()
trans.setFunction(osg.BlendFunc.ONE,osg.BlendFunc.ONE)
statesetBin5 = createMirrorTexturedState("Images/tank.rgb")
statesetBin5.setRenderBinDetails(5,"RenderBin")
statesetBin5.setMode(GL_CULL_FACE,osg.StateAttribute.OFF)
statesetBin5.setAttributeAndModes(stencil,osg.StateAttribute.ON)
statesetBin5.setAttributeAndModes(trans,osg.StateAttribute.ON)
statesetBin5.setAttribute(depth)
# set up the mirror geode.
geode = osg.Geode()
geode.addDrawable(mirror)
geode.setStateSet(statesetBin5)
rootNode.addChild(geode)