def test_013_slave_AP_client_num(self):
u"""终端设备关联在Slave AP上，检查用户数量统计是否正确(testlink_ID:1155,1156)"""
log.debug("013")
#新增一个ssid
NG2_ssid = "%s-2"%data_ng["NG2_ssid"]
Add = SSIDBusiness(self.driver)
Add.new_vlan_ssid(NG2_ssid,data_wireless["short_wpa"],"2")
#多个网络组时，搜索-配对-加入ssid
tmp1 = APSBusiness(self.driver)
tmp1.search_pair_add(2,data_ap["slave:mac2"])
#使用无线连接slave AP
tmp1.connect_DHCP_WPA_AP(NG2_ssid,\
data_wireless["short_wpa"],data_basic['wlan_pc'])
#等待2分钟
time.sleep(120)
tmp = OVBusiness(self.driver)
tmp.OV_menu()
#获取2.4G客户端数
result1 = tmp.get_2g4_client()
#获取5G客户端数
result2 = tmp.get_5g_client()
#释放无线网卡的ip
tmp.dhcp_release_wlan(data_basic['wlan_pc'])
tmp.disconnect_ap()
assert (result1 == "1") or (result2 == "1"),\
"check clients number when client connect slave AP,test fail!"
print "check clients number when client connect slave AP,test pass!"
def test_017_check_AP_webpage(self):
u"""Client数量和状态必须与AP配置页面的client信息一致(testlink_ID:1161)"""
log.debug("017")
tmp = OVBusiness(self.driver)
#获取2.4G客户端数
result1 = tmp.get_2g4_client()
#获取5G客户端数
result2 = tmp.get_5g_client()
result = (int(result1)+int(result2))
#获取所有用户设备数
tmp1 = APSBusiness(self.driver)
num = tmp1.check_users_num()
assert result == num,"check client number is different as AP webpage,test fail!"
print "check client number is same as AP webpage,test pass!"
def test_016_check_Clients_webpage(self):
u"""Client数量和状态必须与客户端页面的信息一致(testlink_ID:1160)"""
log.debug("016")
tmp = OVBusiness(self.driver)
#获取2.4G客户端数
result1 = tmp.get_2g4_client()
#获取5G客户端数
result2 = tmp.get_5g_client()
result = (int(result1)+int(result2))
tmp1 = ClientsBusiness(self.driver)
tmp1.clients_menu()
num = tmp1.get_clients_num()
assert result == num,"check client number is different as Clients webpage,test fail!"
print "check client number is same as Clients webpage,test pass!"
def test_010_clients_num(self):
u"""2.4G/5G 用户数量统计(testlink_ID:1151,1152)"""
log.debug("010")
tmp = OVBusiness(self.driver)
#获取2.4G客户端数
result1 = tmp.get_2g4_client()
#获取5G客户端数
result2 = tmp.get_5g_client()
#释放无线网卡的ip
tmp.dhcp_release_wlan(data_basic['wlan_pc'])
#AP切换到2.4G
Lg = LoginBusiness(self.driver)
Lg.refresh_login_ap()
tmp1 = SSIDBusiness(self.driver)
tmp1.change_AP_Freq("2.4GHz")
assert (result1 == "1") or (result2 == "1"),"check clients number,test fail!"
print "check clients number,test pass!"
def test_014_unpair_client_num(self):
u"""AP解除配对后，只要在客户端列表，依然统计在该AP上关联的终端设备(testlink_ID:1158)"""
log.debug("014")
#解除最后一个slave AP的配对
tmp1 = APSBusiness(self.driver)
tmp1.unpair_last_slave_ap(1)
tmp = OVBusiness(self.driver)
tmp.OV_menu()
#获取2.4G客户端数
result1 = tmp.get_2g4_client()
#获取5G客户端数
result2 = tmp.get_5g_client()
#使用无线连接master AP
tmp.connect_WPA_AP(data_wireless['all_ssid'],\
data_wireless["short_wpa"],data_basic['wlan_pc'])
assert (result1 == "1") or (result2 == "1"),\
"check clients number when client connect slave AP,test fail!"
print "check clients number when client connect slave AP,test pass!"
def test_011_2g4_client_num(self):
u"""终端设备在2.4G上， 检查用户数量统计是否正确(testlink_ID:1153_1)"""
log.debug("011")
tmp = OVBusiness(self.driver)
#使用无线连接该AP
tmp.connect_DHCP_WPA_AP(data_wireless['all_ssid'],\
data_wireless["short_wpa"],data_basic['wlan_pc'])
#等待2分钟
time.sleep(120)
#获取2.4G客户端数
result = tmp.get_2g4_client()
#释放无线网卡的ip
tmp.dhcp_release_wlan(data_basic['wlan_pc'])
#AP切换到5G
Lg = LoginBusiness(self.driver)
Lg.refresh_login_ap()
tmp1 = SSIDBusiness(self.driver)
tmp1.change_AP_Freq("5GHz")
assert result == "1","check 2.4G client number,test fail!"
print "check 2.4G client number,test pass!"