def main():
from optparse import OptionParser
parser = OptionParser()
parser.add_option("-I",
"--ether_iface",
dest="ether_iface",
default=None,
help="The name of the source interface.")
parser.add_option("-e",
"--ether_source",
dest="ether_source",
default=None,
help="The host Ethernet source address.")
parser.add_option("-s",
"--ip_source",
dest="ip_source",
default=None,
help="The IP source address.")
parser.add_option("-G",
"--igmp_group",
dest="igmp_group",
default=None,
help="The IPv4 group to spoof a leave message for.")
parser.add_option("-A",
"--no-router-alert",
action="store_true",
dest="no_ra",
help="Disable the use of the IP Router Alert option.")
(options, args) = parser.parse_args()
if options.igmp_group is None or \
options.ether_source is None or \
options.ether_iface is None or \
options.ip_source is None:
print "A required argument is missing."
return
output = PcapConnector(options.ether_iface)
c = ethernet(src=ether_atob(options.ether_source), \
dst=ETHER_MAP_IP_MULTICAST(INADDR_ALLRTRS_GROUP)) / \
ipv4(flags=IP_DF, id=123, ttl=1, \
src=inet_atol(options.ip_source), \
dst=INADDR_ALLRTRS_GROUP) / \
igmp(type=IGMP_HOST_LEAVE_MESSAGE) / \
igmpv2(group=inet_atol(options.igmp_group))
c.fixup()
out = output.write(c.bytes, len(c.bytes))
def main():
from optparse import OptionParser
parser = OptionParser()
parser.add_option("-I", "--ether_iface",
dest="ether_iface", default=None,
help="The name of the source interface.")
parser.add_option("-e", "--ether_source",
dest="ether_source", default=None,
help="The host Ethernet source address.")
parser.add_option("-s", "--ip_source",
dest="ip_source", default=None,
help="The IP source address.")
parser.add_option("-G", "--igmp_group",
dest="igmp_group", default=None,
help="The IPv4 group to spoof a leave message for.")
parser.add_option("-A", "--no-router-alert",
action="store_true", dest="no_ra",
help="Disable the use of the IP Router Alert option.")
(options, args) = parser.parse_args()
if options.igmp_group is None or \
options.ether_source is None or \
options.ether_iface is None or \
options.ip_source is None:
print "A required argument is missing."
return
output = PcapConnector(options.ether_iface)
c = ethernet(src=ether_atob(options.ether_source), \
dst=ETHER_MAP_IP_MULTICAST(INADDR_ALLRTRS_GROUP)) / \
ipv4(flags=IP_DF, id=123, ttl=1, \
src=inet_atol(options.ip_source), \
dst=INADDR_ALLRTRS_GROUP) / \
igmp(type=IGMP_HOST_LEAVE_MESSAGE) / \
igmpv2(group=inet_atol(options.igmp_group))
c.fixup()
out = output.write(c.bytes, len(c.bytes))
def main():
from optparse import OptionParser
parser = OptionParser()
parser.add_option("-I",
"--ether_iface",
dest="ether_iface",
default=None,
help="The name of the source interface.")
parser.add_option("-e",
"--ether_source",
dest="ether_source",
default=None,
help="The host Ethernet source address.")
parser.add_option("-s",
"--ip_source",
dest="ip_source",
default=None,
help="The IP source address.")
parser.add_option("-G",
"--igmp_group",
dest="igmp_group",
default=None,
help="The IPv4 group for a group-specific query. "
"If omitted, send a general query.")
parser.add_option("-M",
"--maxresp",
dest="igmp_maxresp",
default=None,
help="The maximum time for end-stations to respond "
"(in seconds).")
parser.add_option("-c",
"--count",
dest="count",
default=None,
help="Stop after receiving at least count responses.")
(options, args) = parser.parse_args()
if options.ether_iface is None or \
options.ether_source is None or \
options.ip_source is None or \
options.count is None:
print "Non-optional argument missing."
return
maxresp = 3 * 10
if options.igmp_maxresp is not None:
maxresp = int(options.igmp_maxresp) * 10 # in units of deciseconds
if options.igmp_group is None:
# General query.
dst = INADDR_ALLHOSTS_GROUP
group = INADDR_ANY
else:
# Group-specific query.
dst = inet_atol(options.igmp_group)
group = dst
# Queries don't contain the Router Alert option as they are
# destined for end stations, not routers.
c = ethernet(src=ether_atob(options.ether_source), \
dst=ETHER_MAP_IP_MULTICAST(dst)) / \
ipv4(flags=IP_DF, ttl=1, \
src=inet_atol(options.ip_source), \
dst=dst) / \
igmp(type=IGMP_HOST_MEMBERSHIP_QUERY, code=maxresp) / \
igmpv2(group=group)
c.fixup()
input = PcapConnector(options.ether_iface)
input.setfilter("igmp")
output = PcapConnector(options.ether_iface)
out = output.write(c.bytes, len(c.bytes))
#
# Wait for up to 'count' responses to the query to arrive and print them.
#
count = int(options.count)
while count > 0:
packet = input.readpkt()
chain = packet.chain()
if chain.packets[2].type == IGMP_v2_HOST_MEMBERSHIP_REPORT:
#print chain.packets[2].println()
print "%s is in %s" % \
(inet_ntop(AF_INET, struct.pack('!L', chain.packets[1].src)), \
inet_ntop(AF_INET, struct.pack('!L', chain.packets[3].group)))
count -= 1
def main():
from optparse import OptionParser
parser = OptionParser()
parser.add_option("-I",
"--ether_iface",
dest="ether_iface",
default=None,
help="The name of the source interface.")
parser.add_option("-e",
"--ether_source",
dest="ether_source",
default=None,
help="The host Ethernet source address.")
parser.add_option("-s",
"--ip_source",
dest="ip_source",
default=None,
help="The IP source address.")
parser.add_option("-G",
"--igmp_group",
dest="igmp_group",
default=None,
help="The IPv4 group for a group-specific query. "
"If omitted, send a general query.")
parser.add_option("-S",
"--seconds",
dest="seconds",
default=1.0,
help="Number of seconds between packets.")
parser.add_option("-c",
"--count",
dest="count",
default=None,
help="Stop after sending count packets.")
(options, args) = parser.parse_args()
if options.ether_iface is None or \
options.ether_source is None or \
options.ip_source is None or \
options.count is None:
print "Non-optional argument missing."
return
maxresp = 3 * 10
if options.igmp_group is None:
# General query.
dst = INADDR_ALLHOSTS_GROUP
group = INADDR_ANY
else:
# Group-specific query.
dst = inet_atol(options.igmp_group)
group = dst
# Queries don't contain the Router Alert option as they are
# destined for end stations, not routers.
c = ethernet(src=ether_atob(options.ether_source), \
dst=ETHER_MAP_IP_MULTICAST(dst)) / \
ipv4(flags=IP_DF, ttl=1, \
src=inet_atol(options.ip_source), \
dst=dst) / \
igmp(type=IGMP_v2_HOST_MEMBERSHIP_REPORT, code=maxresp) / \
igmpv2(group=group)
c.fixup()
output = PcapConnector(options.ether_iface)
#
# Send count packets, delayed by seconds
#
count = int(options.count)
if count < 0:
count = sys.maxint
while count > 0:
out = output.write(c.bytes, len(c.bytes))
count -= 1
sleep(float(options.seconds))
def main():
from optparse import OptionParser
parser = OptionParser()
parser.add_option("-I", "--ether_iface",
dest="ether_iface", default=None,
help="The name of the source interface.")
parser.add_option("-e", "--ether_source",
dest="ether_source", default=None,
help="The host Ethernet source address.")
parser.add_option("-s", "--ip_source",
dest="ip_source", default=None,
help="The IP source address.")
parser.add_option("-G", "--igmp_group",
dest="igmp_group", default=None,
help="The IPv4 group for a group-specific query. "
"If omitted, send a general query.")
parser.add_option("-S", "--seconds",
dest="seconds", default=1.0,
help="Number of seconds between packets.")
parser.add_option("-c", "--count",
dest="count", default=None,
help="Stop after sending count packets.")
(options, args) = parser.parse_args()
if options.ether_iface is None or \
options.ether_source is None or \
options.ip_source is None or \
options.count is None:
print "Non-optional argument missing."
return
maxresp = 3 * 10
if options.igmp_group is None:
# General query.
dst = INADDR_ALLHOSTS_GROUP
group = INADDR_ANY
else:
# Group-specific query.
dst = inet_atol(options.igmp_group)
group = dst
# Queries don't contain the Router Alert option as they are
# destined for end stations, not routers.
c = ethernet(src=ether_atob(options.ether_source), \
dst=ETHER_MAP_IP_MULTICAST(dst)) / \
ipv4(flags=IP_DF, ttl=1, \
src=inet_atol(options.ip_source), \
dst=dst) / \
igmp(type=IGMP_v2_HOST_MEMBERSHIP_REPORT, code=maxresp) / \
igmpv2(group=group)
c.fixup()
output = PcapConnector(options.ether_iface)
#
# Send count packets, delayed by seconds
#
count = int(options.count)
if count < 0:
count = sys.maxint
while count > 0:
out = output.write(c.bytes, len(c.bytes))
count -= 1
sleep(float(options.seconds))
def main():
from optparse import OptionParser
parser = OptionParser()
parser.add_option("-I", "--ether_iface",
dest="ether_iface", default=None,
help="The name of the source interface.")
parser.add_option("-e", "--ether_source",
dest="ether_source", default=None,
help="The host Ethernet source address.")
parser.add_option("-s", "--ip_source",
dest="ip_source", default=None,
help="The IP source address.")
parser.add_option("-G", "--igmp_group",
dest="igmp_group", default=None,
help="The IPv4 group for a group-specific query. "
"If omitted, send a general query.")
parser.add_option("-M", "--maxresp",
dest="igmp_maxresp", default=None,
help="The maximum time for end-stations to respond "
"(in seconds).")
parser.add_option("-c", "--count",
dest="count", default=None,
help="Stop after receiving at least count responses.")
(options, args) = parser.parse_args()
if options.ether_iface is None or \
options.ether_source is None or \
options.ip_source is None or \
options.count is None:
print "Non-optional argument missing."
return
maxresp = 3 * 10
if options.igmp_maxresp is not None:
maxresp = int(options.igmp_maxresp) * 10 # in units of deciseconds
if options.igmp_group is None:
# General query.
dst = INADDR_ALLHOSTS_GROUP
group = INADDR_ANY
else:
# Group-specific query.
dst = inet_atol(options.igmp_group)
group = dst
# Queries don't contain the Router Alert option as they are
# destined for end stations, not routers.
c = ethernet(src=ether_atob(options.ether_source), \
dst=ETHER_MAP_IP_MULTICAST(dst)) / \
ipv4(flags=IP_DF, ttl=1, \
src=inet_atol(options.ip_source), \
dst=dst) / \
igmp(type=IGMP_HOST_MEMBERSHIP_QUERY, code=maxresp) / \
igmpv2(group=group)
c.fixup()
input = PcapConnector(options.ether_iface)
input.setfilter("igmp")
output = PcapConnector(options.ether_iface)
out = output.write(c.bytes, len(c.bytes))
#
# Wait for up to 'count' responses to the query to arrive and print them.
#
count = int(options.count)
while count > 0:
packet = input.readpkt()
chain = packet.chain()
if chain.packets[2].type == IGMP_v2_HOST_MEMBERSHIP_REPORT:
#print chain.packets[2].println()
print "%s is in %s" % \
(inet_ntop(AF_INET, struct.pack('!L', chain.packets[1].src)), \
inet_ntop(AF_INET, struct.pack('!L', chain.packets[3].group)))
count -= 1
def main():
from optparse import OptionParser
parser = OptionParser()
parser.add_option("-I", "--ether_iface",
dest="ether_iface", default=None,
help="The name of the source interface.")
parser.add_option("-e", "--ether_source",
dest="ether_source", default=None,
help="The host Ethernet source address.")
parser.add_option("-s", "--ip_source",
dest="ip_source", default=None,
help="The IP source address.")
parser.add_option("-G", "--igmp_group",
dest="igmp_group", default=None,
help="The IPv4 group for a group-specific query. "
"If omitted, send a general query.")
parser.add_option("-M", "--maxresp",
dest="igmp_maxresp", default=None,
help="The maximum time for end-stations to respond "
"(in seconds).")
parser.add_option("-l", "--host_list",
dest="hostlist", action="append",
help="List of hosts we expect responses from.")
parser.add_option("-n", "--number",
dest="number", default = 1, type=int,
help="Query a number of groups starting at "
"the one given by -G")
parser.add_option("-c", "--count",
dest="count", default=None,
help="Stop after receiving at least count responses.")
(options, args) = parser.parse_args()
if options.ether_iface is None or \
options.ether_source is None or \
options.ip_source is None or \
options.count is None:
print "Non-optional argument missing."
return
maxresp = 3 * 10
if options.igmp_maxresp is not None:
maxresp = int(options.igmp_maxresp) * 10 # in units of deciseconds
if options.igmp_group is None:
# General query.
dst = INADDR_ALLHOSTS_GROUP
group = INADDR_ANY
else:
# Group-specific query.
dst = inet_atol(options.igmp_group)
group = dst
# Set up our match table
global match
match = {}
for host in options.hostlist:
for addr in range(group, group + options.number):
match[(inet_atol(host), (addr))] = False
signal.signal(signal.SIGINFO, results)
while (options.number >= 0):
# Queries don't contain the Router Alert option as they are
# destined for end stations, not routers.
c = ethernet(src=ether_atob(options.ether_source), \
dst=ETHER_MAP_IP_MULTICAST(dst)) / \
ipv4(flags=IP_DF, ttl=1, \
src=inet_atol(options.ip_source), \
dst=dst + options.number) / \
igmp(type=IGMP_HOST_MEMBERSHIP_QUERY, code=maxresp) / \
igmpv2(group=(group + options.number))
c.fixup()
input = PcapConnector(options.ether_iface)
input.setfilter("igmp")
output = PcapConnector(options.ether_iface)
out = output.write(c.bytes, len(c.bytes))
options.number -= 1
#
# Wait for up to 'count' responses to the query to arrive and print them.
#
count = int(options.count)
while count > 0:
packet = input.readpkt()
chain = packet.chain()
if chain.packets[2].type == IGMP_v2_HOST_MEMBERSHIP_REPORT:
#print chain.packets[2].println()
# print "%s is in %s" % \
# (inet_ntop(AF_INET, struct.pack('!L', chain.packets[1].src)), \
# inet_ntop(AF_INET, struct.pack('!L', chain.packets[3].group)))
match[(chain.packets[1].src, chain.packets[3].group)] = True
count -= 1
results(0, 0)