with QuantumTape() as tape:
qml.Barrier(wires=(0, 1, 2))
_, ax = tape_mpl(tape)
layer = 0
assert len(ax.lines) == 3
assert len(ax.collections) == 2
plt.close()
controlled_data = [
(qml.CY(wires=(0, 1)), "Y"),
(qml.CRX(1.2345, wires=(0, 1)), "RX"),
(qml.CRot(1.2, 2.2, 3.3, wires=(0, 1)), "Rot"),
]
class TestControlledGates:
"""Tests generic controlled gates"""
@pytest.mark.parametrize("op, label", controlled_data)
def test_control_gates(self, op, label):
"""Test a variety of non-special gates. Checks control wires are drawn, and
that a box is drawn over the target wires."""
with QuantumTape() as tape:
qml.apply(op)
_, ax = tape_mpl(tape)
layer = 0
# Some useful global variables
# gates for which device support is tested
ops = {
"BasisState":
qml.BasisState(np.array([0]), wires=[0]),
"CNOT":
qml.CNOT(wires=[0, 1]),
"CRX":
qml.CRX(0, wires=[0, 1]),
"CRY":
qml.CRY(0, wires=[0, 1]),
"CRZ":
qml.CRZ(0, wires=[0, 1]),
"CRot":
qml.CRot(0, 0, 0, wires=[0, 1]),
"CSWAP":
qml.CSWAP(wires=[0, 1, 2]),
"CZ":
qml.CZ(wires=[0, 1]),
"CY":
qml.CY(wires=[0, 1]),
"DiagonalQubitUnitary":
qml.DiagonalQubitUnitary(np.array([1, 1]), wires=[0]),
"Hadamard":
qml.Hadamard(wires=[0]),
"MultiRZ":
qml.MultiRZ(0, wires=[0]),
"PauliX":
qml.PauliX(wires=[0]),
"PauliY":
def circuit(a, b, c):
qml.QubitStateVector(np.array([1., -1.]) / np.sqrt(2), wires=0)
qml.CRot(a, b, c, wires=[0, 1])
return qml.expval(qml.PauliX(0))
class TestRepresentationResolver:
"""Test the RepresentationResolver class."""
@pytest.mark.parametrize(
"list,element,index,list_after",
[
([1, 2, 3], 2, 1, [1, 2, 3]),
([1, 2, 2, 3], 2, 1, [1, 2, 2, 3]),
([1, 2, 3], 4, 3, [1, 2, 3, 4]),
],
)
def test_index_of_array_or_append(self, list, element, index, list_after):
"""Test the method index_of_array_or_append."""
assert RepresentationResolver.index_of_array_or_append(element, list) == index
assert list == list_after
@pytest.mark.parametrize(
"par,expected",
[
(3, "3"),
(5.236422, "5.24"),
],
)
def test_single_parameter_representation(self, unicode_representation_resolver, par, expected):
"""Test that single parameters are properly resolved."""
assert unicode_representation_resolver.single_parameter_representation(par) == expected
@pytest.mark.parametrize(
"op,wire,target",
[
(qml.PauliX(wires=[1]), 1, "X"),
(qml.CNOT(wires=[0, 1]), 1, "X"),
(qml.CNOT(wires=[0, 1]), 0, "C"),
(qml.Toffoli(wires=[0, 2, 1]), 1, "X"),
(qml.Toffoli(wires=[0, 2, 1]), 0, "C"),
(qml.Toffoli(wires=[0, 2, 1]), 2, "C"),
(qml.CSWAP(wires=[0, 2, 1]), 1, "SWAP"),
(qml.CSWAP(wires=[0, 2, 1]), 2, "SWAP"),
(qml.CSWAP(wires=[0, 2, 1]), 0, "C"),
(qml.PauliY(wires=[1]), 1, "Y"),
(qml.PauliZ(wires=[1]), 1, "Z"),
(qml.CZ(wires=[0, 1]), 1, "Z"),
(qml.CZ(wires=[0, 1]), 0, "C"),
(qml.Identity(wires=[1]), 1, "I"),
(qml.Hadamard(wires=[1]), 1, "H"),
(qml.PauliRot(3.14, "XX", wires=[0, 1]), 1, "RX(3.14)"),
(qml.PauliRot(3.14, "YZ", wires=[0, 1]), 1, "RZ(3.14)"),
(qml.PauliRot(3.14, "IXYZI", wires=[0, 1, 2, 3, 4]), 0, "RI(3.14)"),
(qml.PauliRot(3.14, "IXYZI", wires=[0, 1, 2, 3, 4]), 1, "RX(3.14)"),
(qml.PauliRot(3.14, "IXYZI", wires=[0, 1, 2, 3, 4]), 2, "RY(3.14)"),
(qml.PauliRot(3.14, "IXYZI", wires=[0, 1, 2, 3, 4]), 3, "RZ(3.14)"),
(qml.PauliRot(3.14, "IXYZI", wires=[0, 1, 2, 3, 4]), 4, "RI(3.14)"),
(qml.MultiRZ(3.14, wires=[0, 1]), 0, "RZ(3.14)"),
(qml.MultiRZ(3.14, wires=[0, 1]), 1, "RZ(3.14)"),
(qml.CRX(3.14, wires=[0, 1]), 1, "RX(3.14)"),
(qml.CRX(3.14, wires=[0, 1]), 0, "C"),
(qml.CRY(3.14, wires=[0, 1]), 1, "RY(3.14)"),
(qml.CRY(3.14, wires=[0, 1]), 0, "C"),
(qml.CRZ(3.14, wires=[0, 1]), 1, "RZ(3.14)"),
(qml.CRZ(3.14, wires=[0, 1]), 0, "C"),
(qml.CRot(3.14, 2.14, 1.14, wires=[0, 1]), 1, "Rot(3.14, 2.14, 1.14)"),
(qml.CRot(3.14, 2.14, 1.14, wires=[0, 1]), 0, "C"),
(qml.PhaseShift(3.14, wires=[0]), 0, "Rϕ(3.14)"),
(qml.Beamsplitter(1, 2, wires=[0, 1]), 1, "BS(1, 2)"),
(qml.Beamsplitter(1, 2, wires=[0, 1]), 0, "BS(1, 2)"),
(qml.Squeezing(1, 2, wires=[1]), 1, "S(1, 2)"),
(qml.TwoModeSqueezing(1, 2, wires=[0, 1]), 1, "S(1, 2)"),
(qml.TwoModeSqueezing(1, 2, wires=[0, 1]), 0, "S(1, 2)"),
(qml.Displacement(1, 2, wires=[1]), 1, "D(1, 2)"),
(qml.NumberOperator(wires=[1]), 1, "n"),
(qml.Rotation(3.14, wires=[1]), 1, "R(3.14)"),
(qml.ControlledAddition(3.14, wires=[0, 1]), 1, "X(3.14)"),
(qml.ControlledAddition(3.14, wires=[0, 1]), 0, "C"),
(qml.ControlledPhase(3.14, wires=[0, 1]), 1, "Z(3.14)"),
(qml.ControlledPhase(3.14, wires=[0, 1]), 0, "C"),
(qml.ThermalState(3, wires=[1]), 1, "Thermal(3)"),
(
qml.GaussianState(np.array([[2, 0], [0, 2]]), np.array([1, 2]), wires=[1]),
1,
"Gaussian(M0,M1)",
),
(qml.QuadraticPhase(3.14, wires=[1]), 1, "P(3.14)"),
(qml.RX(3.14, wires=[1]), 1, "RX(3.14)"),
(qml.S(wires=[2]), 2, "S"),
(qml.T(wires=[2]), 2, "T"),
(qml.RX(3.14, wires=[1]), 1, "RX(3.14)"),
(qml.RY(3.14, wires=[1]), 1, "RY(3.14)"),
(qml.RZ(3.14, wires=[1]), 1, "RZ(3.14)"),
(qml.Rot(3.14, 2.14, 1.14, wires=[1]), 1, "Rot(3.14, 2.14, 1.14)"),
(qml.U1(3.14, wires=[1]), 1, "U1(3.14)"),
(qml.U2(3.14, 2.14, wires=[1]), 1, "U2(3.14, 2.14)"),
(qml.U3(3.14, 2.14, 1.14, wires=[1]), 1, "U3(3.14, 2.14, 1.14)"),
(qml.BasisState(np.array([0, 1, 0]), wires=[1, 2, 3]), 1, "|0⟩"),
(qml.BasisState(np.array([0, 1, 0]), wires=[1, 2, 3]), 2, "|1⟩"),
(qml.BasisState(np.array([0, 1, 0]), wires=[1, 2, 3]), 3, "|0⟩"),
(qml.QubitStateVector(np.array([0, 1, 0, 0]), wires=[1, 2]), 1, "QubitStateVector(M0)"),
(qml.QubitStateVector(np.array([0, 1, 0, 0]), wires=[1, 2]), 2, "QubitStateVector(M0)"),
(qml.QubitUnitary(np.eye(2), wires=[1]), 1, "U0"),
(qml.QubitUnitary(np.eye(4), wires=[1, 2]), 2, "U0"),
(qml.Kerr(3.14, wires=[1]), 1, "Kerr(3.14)"),
(qml.CrossKerr(3.14, wires=[1, 2]), 1, "CrossKerr(3.14)"),
(qml.CrossKerr(3.14, wires=[1, 2]), 2, "CrossKerr(3.14)"),
(qml.CubicPhase(3.14, wires=[1]), 1, "V(3.14)"),
(qml.Interferometer(np.eye(4), wires=[1, 3]), 1, "Interferometer(M0)"),
(qml.Interferometer(np.eye(4), wires=[1, 3]), 3, "Interferometer(M0)"),
(qml.CatState(3.14, 2.14, 1, wires=[1]), 1, "CatState(3.14, 2.14, 1)"),
(qml.CoherentState(3.14, 2.14, wires=[1]), 1, "CoherentState(3.14, 2.14)"),
(
qml.FockDensityMatrix(np.kron(np.eye(4), np.eye(4)), wires=[1, 2]),
1,
"FockDensityMatrix(M0)",
),
(
qml.FockDensityMatrix(np.kron(np.eye(4), np.eye(4)), wires=[1, 2]),
2,
"FockDensityMatrix(M0)",
),
(
qml.DisplacedSqueezedState(3.14, 2.14, 1.14, 0.14, wires=[1]),
1,
"DisplacedSqueezedState(3.14, 2.14, 1.14, 0.14)",
),
(qml.FockState(7, wires=[1]), 1, "|7⟩"),
(qml.FockStateVector(np.array([4, 5, 7]), wires=[1, 2, 3]), 1, "|4⟩"),
(qml.FockStateVector(np.array([4, 5, 7]), wires=[1, 2, 3]), 2, "|5⟩"),
(qml.FockStateVector(np.array([4, 5, 7]), wires=[1, 2, 3]), 3, "|7⟩"),
(qml.SqueezedState(3.14, 2.14, wires=[1]), 1, "SqueezedState(3.14, 2.14)"),
(qml.Hermitian(np.eye(4), wires=[1, 2]), 1, "H0"),
(qml.Hermitian(np.eye(4), wires=[1, 2]), 2, "H0"),
(qml.X(wires=[1]), 1, "x"),
(qml.P(wires=[1]), 1, "p"),
(qml.FockStateProjector(np.array([4, 5, 7]), wires=[1, 2, 3]), 1, "|4,5,7╳4,5,7|"),
(
qml.PolyXP(np.array([1, 2, 0, -1.3, 6]), wires=[1]),
2,
"1+2x₀-1.3x₁+6p₁",
),
(
qml.PolyXP(
np.array([[1.2, 2.3, 4.5], [-1.2, 1.2, -1.5], [-1.3, 4.5, 2.3]]), wires=[1]
),
1,
"1.2+1.1x₀+3.2p₀+1.2x₀²+2.3p₀²+3x₀p₀",
),
(
qml.PolyXP(
np.array(
[
[1.2, 2.3, 4.5, 0, 0],
[-1.2, 1.2, -1.5, 0, 0],
[-1.3, 4.5, 2.3, 0, 0],
[0, 2.6, 0, 0, 0],
[0, 0, 0, -4.7, -1.0],
]
),
wires=[1],
),
1,
"1.2+1.1x₀+3.2p₀+1.2x₀²+2.3p₀²+3x₀p₀+2.6x₀x₁-p₁²-4.7x₁p₁",
),
(qml.QuadOperator(3.14, wires=[1]), 1, "cos(3.14)x+sin(3.14)p"),
(qml.PauliX(wires=[1]).inv(), 1, "X⁻¹"),
(qml.CNOT(wires=[0, 1]).inv(), 1, "X⁻¹"),
(qml.CNOT(wires=[0, 1]).inv(), 0, "C"),
(qml.Toffoli(wires=[0, 2, 1]).inv(), 1, "X⁻¹"),
(qml.Toffoli(wires=[0, 2, 1]).inv(), 0, "C"),
(qml.Toffoli(wires=[0, 2, 1]).inv(), 2, "C"),
(qml.measure.sample(wires=[0, 1]), 0, "basis"), # not providing an observable in
(qml.measure.sample(wires=[0, 1]), 1, "basis"), # sample gets displayed as raw
],
)
def test_operator_representation_unicode(
self, unicode_representation_resolver, op, wire, target
):
"""Test that an Operator instance is properly resolved."""
assert unicode_representation_resolver.operator_representation(op, wire) == target
@pytest.mark.parametrize(
"op,wire,target",
[
(qml.PauliX(wires=[1]), 1, "X"),
(qml.CNOT(wires=[0, 1]), 1, "X"),
(qml.CNOT(wires=[0, 1]), 0, "C"),
(qml.Toffoli(wires=[0, 2, 1]), 1, "X"),
(qml.Toffoli(wires=[0, 2, 1]), 0, "C"),
(qml.Toffoli(wires=[0, 2, 1]), 2, "C"),
(qml.CSWAP(wires=[0, 2, 1]), 1, "SWAP"),
(qml.CSWAP(wires=[0, 2, 1]), 2, "SWAP"),
(qml.CSWAP(wires=[0, 2, 1]), 0, "C"),
(qml.PauliY(wires=[1]), 1, "Y"),
(qml.PauliZ(wires=[1]), 1, "Z"),
(qml.CZ(wires=[0, 1]), 1, "Z"),
(qml.CZ(wires=[0, 1]), 0, "C"),
(qml.Identity(wires=[1]), 1, "I"),
(qml.Hadamard(wires=[1]), 1, "H"),
(qml.CRX(3.14, wires=[0, 1]), 1, "RX(3.14)"),
(qml.CRX(3.14, wires=[0, 1]), 0, "C"),
(qml.CRY(3.14, wires=[0, 1]), 1, "RY(3.14)"),
(qml.CRY(3.14, wires=[0, 1]), 0, "C"),
(qml.CRZ(3.14, wires=[0, 1]), 1, "RZ(3.14)"),
(qml.CRZ(3.14, wires=[0, 1]), 0, "C"),
(qml.CRot(3.14, 2.14, 1.14, wires=[0, 1]), 1, "Rot(3.14, 2.14, 1.14)"),
(qml.CRot(3.14, 2.14, 1.14, wires=[0, 1]), 0, "C"),
(qml.PhaseShift(3.14, wires=[0]), 0, "Rϕ(3.14)"),
(qml.Beamsplitter(1, 2, wires=[0, 1]), 1, "BS(1, 2)"),
(qml.Beamsplitter(1, 2, wires=[0, 1]), 0, "BS(1, 2)"),
(qml.Squeezing(1, 2, wires=[1]), 1, "S(1, 2)"),
(qml.TwoModeSqueezing(1, 2, wires=[0, 1]), 1, "S(1, 2)"),
(qml.TwoModeSqueezing(1, 2, wires=[0, 1]), 0, "S(1, 2)"),
(qml.Displacement(1, 2, wires=[1]), 1, "D(1, 2)"),
(qml.NumberOperator(wires=[1]), 1, "n"),
(qml.Rotation(3.14, wires=[1]), 1, "R(3.14)"),
(qml.ControlledAddition(3.14, wires=[0, 1]), 1, "X(3.14)"),
(qml.ControlledAddition(3.14, wires=[0, 1]), 0, "C"),
(qml.ControlledPhase(3.14, wires=[0, 1]), 1, "Z(3.14)"),
(qml.ControlledPhase(3.14, wires=[0, 1]), 0, "C"),
(qml.ThermalState(3, wires=[1]), 1, "Thermal(3)"),
(
qml.GaussianState(np.array([[2, 0], [0, 2]]), np.array([1, 2]), wires=[1]),
1,
"Gaussian(M0,M1)",
),
(qml.QuadraticPhase(3.14, wires=[1]), 1, "P(3.14)"),
(qml.RX(3.14, wires=[1]), 1, "RX(3.14)"),
(qml.S(wires=[2]), 2, "S"),
(qml.T(wires=[2]), 2, "T"),
(qml.RX(3.14, wires=[1]), 1, "RX(3.14)"),
(qml.RY(3.14, wires=[1]), 1, "RY(3.14)"),
(qml.RZ(3.14, wires=[1]), 1, "RZ(3.14)"),
(qml.Rot(3.14, 2.14, 1.14, wires=[1]), 1, "Rot(3.14, 2.14, 1.14)"),
(qml.U1(3.14, wires=[1]), 1, "U1(3.14)"),
(qml.U2(3.14, 2.14, wires=[1]), 1, "U2(3.14, 2.14)"),
(qml.U3(3.14, 2.14, 1.14, wires=[1]), 1, "U3(3.14, 2.14, 1.14)"),
(qml.BasisState(np.array([0, 1, 0]), wires=[1, 2, 3]), 1, "|0>"),
(qml.BasisState(np.array([0, 1, 0]), wires=[1, 2, 3]), 2, "|1>"),
(qml.BasisState(np.array([0, 1, 0]), wires=[1, 2, 3]), 3, "|0>"),
(qml.QubitStateVector(np.array([0, 1, 0, 0]), wires=[1, 2]), 1, "QubitStateVector(M0)"),
(qml.QubitStateVector(np.array([0, 1, 0, 0]), wires=[1, 2]), 2, "QubitStateVector(M0)"),
(qml.QubitUnitary(np.eye(2), wires=[1]), 1, "U0"),
(qml.QubitUnitary(np.eye(4), wires=[1, 2]), 2, "U0"),
(qml.Kerr(3.14, wires=[1]), 1, "Kerr(3.14)"),
(qml.CrossKerr(3.14, wires=[1, 2]), 1, "CrossKerr(3.14)"),
(qml.CrossKerr(3.14, wires=[1, 2]), 2, "CrossKerr(3.14)"),
(qml.CubicPhase(3.14, wires=[1]), 1, "V(3.14)"),
(qml.Interferometer(np.eye(4), wires=[1, 3]), 1, "Interferometer(M0)"),
(qml.Interferometer(np.eye(4), wires=[1, 3]), 3, "Interferometer(M0)"),
(qml.CatState(3.14, 2.14, 1, wires=[1]), 1, "CatState(3.14, 2.14, 1)"),
(qml.CoherentState(3.14, 2.14, wires=[1]), 1, "CoherentState(3.14, 2.14)"),
(
qml.FockDensityMatrix(np.kron(np.eye(4), np.eye(4)), wires=[1, 2]),
1,
"FockDensityMatrix(M0)",
),
(
qml.FockDensityMatrix(np.kron(np.eye(4), np.eye(4)), wires=[1, 2]),
2,
"FockDensityMatrix(M0)",
),
(
qml.DisplacedSqueezedState(3.14, 2.14, 1.14, 0.14, wires=[1]),
1,
"DisplacedSqueezedState(3.14, 2.14, 1.14, 0.14)",
),
(qml.FockState(7, wires=[1]), 1, "|7>"),
(qml.FockStateVector(np.array([4, 5, 7]), wires=[1, 2, 3]), 1, "|4>"),
(qml.FockStateVector(np.array([4, 5, 7]), wires=[1, 2, 3]), 2, "|5>"),
(qml.FockStateVector(np.array([4, 5, 7]), wires=[1, 2, 3]), 3, "|7>"),
(qml.SqueezedState(3.14, 2.14, wires=[1]), 1, "SqueezedState(3.14, 2.14)"),
(qml.Hermitian(np.eye(4), wires=[1, 2]), 1, "H0"),
(qml.Hermitian(np.eye(4), wires=[1, 2]), 2, "H0"),
(qml.X(wires=[1]), 1, "x"),
(qml.P(wires=[1]), 1, "p"),
(qml.FockStateProjector(np.array([4, 5, 7]), wires=[1, 2, 3]), 1, "|4,5,7X4,5,7|"),
(
qml.PolyXP(np.array([1, 2, 0, -1.3, 6]), wires=[1]),
2,
"1+2x_0-1.3x_1+6p_1",
),
(
qml.PolyXP(
np.array([[1.2, 2.3, 4.5], [-1.2, 1.2, -1.5], [-1.3, 4.5, 2.3]]), wires=[1]
),
1,
"1.2+1.1x_0+3.2p_0+1.2x_0^2+2.3p_0^2+3x_0p_0",
),
(
qml.PolyXP(
np.array(
[
[1.2, 2.3, 4.5, 0, 0],
[-1.2, 1.2, -1.5, 0, 0],
[-1.3, 4.5, 2.3, 0, 0],
[0, 2.6, 0, 0, 0],
[0, 0, 0, -4.7, 0],
]
),
wires=[1],
),
1,
"1.2+1.1x_0+3.2p_0+1.2x_0^2+2.3p_0^2+3x_0p_0+2.6x_0x_1-4.7x_1p_1",
),
(qml.QuadOperator(3.14, wires=[1]), 1, "cos(3.14)x+sin(3.14)p"),
(qml.QuadOperator(3.14, wires=[1]), 1, "cos(3.14)x+sin(3.14)p"),
(qml.PauliX(wires=[1]).inv(), 1, "X^-1"),
(qml.CNOT(wires=[0, 1]).inv(), 1, "X^-1"),
(qml.CNOT(wires=[0, 1]).inv(), 0, "C"),
(qml.Toffoli(wires=[0, 2, 1]).inv(), 1, "X^-1"),
(qml.Toffoli(wires=[0, 2, 1]).inv(), 0, "C"),
(qml.Toffoli(wires=[0, 2, 1]).inv(), 2, "C"),
(qml.measure.sample(wires=[0, 1]), 0, "basis"), # not providing an observable in
(qml.measure.sample(wires=[0, 1]), 1, "basis"), # sample gets displayed as raw
],
)
def test_operator_representation_ascii(self, ascii_representation_resolver, op, wire, target):
"""Test that an Operator instance is properly resolved."""
assert ascii_representation_resolver.operator_representation(op, wire) == target
@pytest.mark.parametrize(
"obs,wire,target",
[
(qml.expval(qml.PauliX(wires=[1])), 1, "⟨X⟩"),
(qml.expval(qml.PauliY(wires=[1])), 1, "⟨Y⟩"),
(qml.expval(qml.PauliZ(wires=[1])), 1, "⟨Z⟩"),
(qml.expval(qml.Hadamard(wires=[1])), 1, "⟨H⟩"),
(qml.expval(qml.Hermitian(np.eye(4), wires=[1, 2])), 1, "⟨H0⟩"),
(qml.expval(qml.Hermitian(np.eye(4), wires=[1, 2])), 2, "⟨H0⟩"),
(qml.expval(qml.NumberOperator(wires=[1])), 1, "⟨n⟩"),
(qml.expval(qml.X(wires=[1])), 1, "⟨x⟩"),
(qml.expval(qml.P(wires=[1])), 1, "⟨p⟩"),
(
qml.expval(qml.FockStateProjector(np.array([4, 5, 7]), wires=[1, 2, 3])),
1,
"⟨|4,5,7╳4,5,7|⟩",
),
(
qml.expval(qml.PolyXP(np.array([1, 2, 0, -1.3, 6]), wires=[1])),
2,
"⟨1+2x₀-1.3x₁+6p₁⟩",
),
(
qml.expval(
qml.PolyXP(
np.array([[1.2, 2.3, 4.5], [-1.2, 1.2, -1.5], [-1.3, 4.5, 2.3]]), wires=[1]
)
),
1,
"⟨1.2+1.1x₀+3.2p₀+1.2x₀²+2.3p₀²+3x₀p₀⟩",
),
(qml.expval(qml.QuadOperator(3.14, wires=[1])), 1, "⟨cos(3.14)x+sin(3.14)p⟩"),
(qml.var(qml.PauliX(wires=[1])), 1, "Var[X]"),
(qml.var(qml.PauliY(wires=[1])), 1, "Var[Y]"),
(qml.var(qml.PauliZ(wires=[1])), 1, "Var[Z]"),
(qml.var(qml.Hadamard(wires=[1])), 1, "Var[H]"),
(qml.var(qml.Hermitian(np.eye(4), wires=[1, 2])), 1, "Var[H0]"),
(qml.var(qml.Hermitian(np.eye(4), wires=[1, 2])), 2, "Var[H0]"),
(qml.var(qml.NumberOperator(wires=[1])), 1, "Var[n]"),
(qml.var(qml.X(wires=[1])), 1, "Var[x]"),
(qml.var(qml.P(wires=[1])), 1, "Var[p]"),
(
qml.var(qml.FockStateProjector(np.array([4, 5, 7]), wires=[1, 2, 3])),
1,
"Var[|4,5,7╳4,5,7|]",
),
(
qml.var(qml.PolyXP(np.array([1, 2, 0, -1.3, 6]), wires=[1])),
2,
"Var[1+2x₀-1.3x₁+6p₁]",
),
(
qml.var(
qml.PolyXP(
np.array([[1.2, 2.3, 4.5], [-1.2, 1.2, -1.5], [-1.3, 4.5, 2.3]]), wires=[1]
)
),
1,
"Var[1.2+1.1x₀+3.2p₀+1.2x₀²+2.3p₀²+3x₀p₀]",
),
(qml.var(qml.QuadOperator(3.14, wires=[1])), 1, "Var[cos(3.14)x+sin(3.14)p]"),
(qml.sample(qml.PauliX(wires=[1])), 1, "Sample[X]"),
(qml.sample(qml.PauliY(wires=[1])), 1, "Sample[Y]"),
(qml.sample(qml.PauliZ(wires=[1])), 1, "Sample[Z]"),
(qml.sample(qml.Hadamard(wires=[1])), 1, "Sample[H]"),
(qml.sample(qml.Hermitian(np.eye(4), wires=[1, 2])), 1, "Sample[H0]"),
(qml.sample(qml.Hermitian(np.eye(4), wires=[1, 2])), 2, "Sample[H0]"),
(qml.sample(qml.NumberOperator(wires=[1])), 1, "Sample[n]"),
(qml.sample(qml.X(wires=[1])), 1, "Sample[x]"),
(qml.sample(qml.P(wires=[1])), 1, "Sample[p]"),
(
qml.sample(qml.FockStateProjector(np.array([4, 5, 7]), wires=[1, 2, 3])),
1,
"Sample[|4,5,7╳4,5,7|]",
),
(
qml.sample(qml.PolyXP(np.array([1, 2, 0, -1.3, 6]), wires=[1])),
2,
"Sample[1+2x₀-1.3x₁+6p₁]",
),
(
qml.sample(
qml.PolyXP(
np.array([[1.2, 2.3, 4.5], [-1.2, 1.2, -1.5], [-1.3, 4.5, 2.3]]), wires=[1]
)
),
1,
"Sample[1.2+1.1x₀+3.2p₀+1.2x₀²+2.3p₀²+3x₀p₀]",
),
(qml.sample(qml.QuadOperator(3.14, wires=[1])), 1, "Sample[cos(3.14)x+sin(3.14)p]"),
(
qml.expval(qml.PauliX(wires=[1]) @ qml.PauliY(wires=[2]) @ qml.PauliZ(wires=[3])),
1,
"⟨X ⊗ Y ⊗ Z⟩",
),
(
qml.expval(
qml.FockStateProjector(np.array([4, 5, 7]), wires=[1, 2, 3]) @ qml.X(wires=[4])
),
1,
"⟨|4,5,7╳4,5,7| ⊗ x⟩",
),
(
qml.expval(
qml.FockStateProjector(np.array([4, 5, 7]), wires=[1, 2, 3]) @ qml.X(wires=[4])
),
2,
"⟨|4,5,7╳4,5,7| ⊗ x⟩",
),
(
qml.expval(
qml.FockStateProjector(np.array([4, 5, 7]), wires=[1, 2, 3]) @ qml.X(wires=[4])
),
3,
"⟨|4,5,7╳4,5,7| ⊗ x⟩",
),
(
qml.expval(
qml.FockStateProjector(np.array([4, 5, 7]), wires=[1, 2, 3]) @ qml.X(wires=[4])
),
4,
"⟨|4,5,7╳4,5,7| ⊗ x⟩",
),
(
qml.sample(
qml.Hermitian(np.eye(4), wires=[1, 2]) @ qml.Hermitian(np.eye(4), wires=[0, 3])
),
0,
"Sample[H0 ⊗ H0]",
),
(
qml.sample(
qml.Hermitian(np.eye(4), wires=[1, 2])
@ qml.Hermitian(2 * np.eye(4), wires=[0, 3])
),
0,
"Sample[H0 ⊗ H1]",
),
(qml.probs([0]), 0, "Probs"),
(state(), 0, "State"),
],
)
def test_output_representation_unicode(
self, unicode_representation_resolver, obs, wire, target
):
"""Test that an Observable instance with return type is properly resolved."""
assert unicode_representation_resolver.output_representation(obs, wire) == target
def test_fallback_output_representation_unicode(self, unicode_representation_resolver):
"""Test that an Observable instance with return type is properly resolved."""
obs = qml.PauliZ(0)
obs.return_type = "TestReturnType"
assert unicode_representation_resolver.output_representation(obs, 0) == "TestReturnType[Z]"
@pytest.mark.parametrize(
"obs,wire,target",
[
(qml.expval(qml.PauliX(wires=[1])), 1, "<X>"),
(qml.expval(qml.PauliY(wires=[1])), 1, "<Y>"),
(qml.expval(qml.PauliZ(wires=[1])), 1, "<Z>"),
(qml.expval(qml.Hadamard(wires=[1])), 1, "<H>"),
(qml.expval(qml.Hermitian(np.eye(4), wires=[1, 2])), 1, "<H0>"),
(qml.expval(qml.Hermitian(np.eye(4), wires=[1, 2])), 2, "<H0>"),
(qml.expval(qml.NumberOperator(wires=[1])), 1, "<n>"),
(qml.expval(qml.X(wires=[1])), 1, "<x>"),
(qml.expval(qml.P(wires=[1])), 1, "<p>"),
(
qml.expval(qml.FockStateProjector(np.array([4, 5, 7]), wires=[1, 2, 3])),
1,
"<|4,5,7X4,5,7|>",
),
(
qml.expval(qml.PolyXP(np.array([1, 2, 0, -1.3, 6]), wires=[1])),
2,
"<1+2x_0-1.3x_1+6p_1>",
),
(
qml.expval(
qml.PolyXP(
np.array([[1.2, 2.3, 4.5], [-1.2, 1.2, -1.5], [-1.3, 4.5, 2.3]]), wires=[1]
)
),
1,
"<1.2+1.1x_0+3.2p_0+1.2x_0^2+2.3p_0^2+3x_0p_0>",
),
(qml.expval(qml.QuadOperator(3.14, wires=[1])), 1, "<cos(3.14)x+sin(3.14)p>"),
(qml.var(qml.PauliX(wires=[1])), 1, "Var[X]"),
(qml.var(qml.PauliY(wires=[1])), 1, "Var[Y]"),
(qml.var(qml.PauliZ(wires=[1])), 1, "Var[Z]"),
(qml.var(qml.Hadamard(wires=[1])), 1, "Var[H]"),
(qml.var(qml.Hermitian(np.eye(4), wires=[1, 2])), 1, "Var[H0]"),
(qml.var(qml.Hermitian(np.eye(4), wires=[1, 2])), 2, "Var[H0]"),
(qml.var(qml.NumberOperator(wires=[1])), 1, "Var[n]"),
(qml.var(qml.X(wires=[1])), 1, "Var[x]"),
(qml.var(qml.P(wires=[1])), 1, "Var[p]"),
(
qml.var(qml.FockStateProjector(np.array([4, 5, 7]), wires=[1, 2, 3])),
1,
"Var[|4,5,7X4,5,7|]",
),
(
qml.var(qml.PolyXP(np.array([1, 2, 0, -1.3, 6]), wires=[1])),
2,
"Var[1+2x_0-1.3x_1+6p_1]",
),
(
qml.var(
qml.PolyXP(
np.array([[1.2, 2.3, 4.5], [-1.2, 1.2, -1.5], [-1.3, 4.5, 2.3]]), wires=[1]
)
),
1,
"Var[1.2+1.1x_0+3.2p_0+1.2x_0^2+2.3p_0^2+3x_0p_0]",
),
(qml.var(qml.QuadOperator(3.14, wires=[1])), 1, "Var[cos(3.14)x+sin(3.14)p]"),
(qml.sample(qml.PauliX(wires=[1])), 1, "Sample[X]"),
(qml.sample(qml.PauliY(wires=[1])), 1, "Sample[Y]"),
(qml.sample(qml.PauliZ(wires=[1])), 1, "Sample[Z]"),
(qml.sample(qml.Hadamard(wires=[1])), 1, "Sample[H]"),
(qml.sample(qml.Hermitian(np.eye(4), wires=[1, 2])), 1, "Sample[H0]"),
(qml.sample(qml.Hermitian(np.eye(4), wires=[1, 2])), 2, "Sample[H0]"),
(qml.sample(qml.NumberOperator(wires=[1])), 1, "Sample[n]"),
(qml.sample(qml.X(wires=[1])), 1, "Sample[x]"),
(qml.sample(qml.P(wires=[1])), 1, "Sample[p]"),
(
qml.sample(qml.FockStateProjector(np.array([4, 5, 7]), wires=[1, 2, 3])),
1,
"Sample[|4,5,7X4,5,7|]",
),
(
qml.sample(qml.PolyXP(np.array([1, 2, 0, -1.3, 6]), wires=[1])),
2,
"Sample[1+2x_0-1.3x_1+6p_1]",
),
(
qml.sample(
qml.PolyXP(
np.array([[1.2, 2.3, 4.5], [-1.2, 1.2, -1.5], [-1.3, 4.5, 2.3]]), wires=[1]
)
),
1,
"Sample[1.2+1.1x_0+3.2p_0+1.2x_0^2+2.3p_0^2+3x_0p_0]",
),
(qml.sample(qml.QuadOperator(3.14, wires=[1])), 1, "Sample[cos(3.14)x+sin(3.14)p]"),
(
qml.expval(qml.PauliX(wires=[1]) @ qml.PauliY(wires=[2]) @ qml.PauliZ(wires=[3])),
1,
"<X @ Y @ Z>",
),
(
qml.expval(
qml.FockStateProjector(np.array([4, 5, 7]), wires=[1, 2, 3]) @ qml.X(wires=[4])
),
1,
"<|4,5,7X4,5,7| @ x>",
),
(
qml.expval(
qml.FockStateProjector(np.array([4, 5, 7]), wires=[1, 2, 3]) @ qml.X(wires=[4])
),
2,
"<|4,5,7X4,5,7| @ x>",
),
(
qml.expval(
qml.FockStateProjector(np.array([4, 5, 7]), wires=[1, 2, 3]) @ qml.X(wires=[4])
),
3,
"<|4,5,7X4,5,7| @ x>",
),
(
qml.expval(
qml.FockStateProjector(np.array([4, 5, 7]), wires=[1, 2, 3]) @ qml.X(wires=[4])
),
4,
"<|4,5,7X4,5,7| @ x>",
),
(
qml.sample(
qml.Hermitian(np.eye(4), wires=[1, 2]) @ qml.Hermitian(np.eye(4), wires=[0, 3])
),
0,
"Sample[H0 @ H0]",
),
(
qml.sample(
qml.Hermitian(np.eye(4), wires=[1, 2])
@ qml.Hermitian(2 * np.eye(4), wires=[0, 3])
),
0,
"Sample[H0 @ H1]",
),
(qml.probs([0]), 0, "Probs"),
(state(), 0, "State"),
],
)
def test_output_representation_ascii(self, ascii_representation_resolver, obs, wire, target):
"""Test that an Observable instance with return type is properly resolved."""
assert ascii_representation_resolver.output_representation(obs, wire) == target
def test_element_representation_none(self, unicode_representation_resolver):
"""Test that element_representation properly handles None."""
assert unicode_representation_resolver.element_representation(None, 0) == ""
def test_element_representation_str(self, unicode_representation_resolver):
"""Test that element_representation properly handles strings."""
assert unicode_representation_resolver.element_representation("Test", 0) == "Test"
def test_element_representation_calls_output(self, unicode_representation_resolver):
"""Test that element_representation calls output_representation for returned observables."""
unicode_representation_resolver.output_representation = Mock()
obs = qml.sample(qml.PauliX(3))
wire = 3
unicode_representation_resolver.element_representation(obs, wire)
assert unicode_representation_resolver.output_representation.call_args[0] == (obs, wire)
def test_element_representation_calls_operator(self, unicode_representation_resolver):
"""Test that element_representation calls operator_representation for all operators that are not returned."""
unicode_representation_resolver.operator_representation = Mock()
op = qml.PauliX(3)
wire = 3
unicode_representation_resolver.element_representation(op, wire)
assert unicode_representation_resolver.operator_representation.call_args[0] == (op, wire)
def circuit(params):
qml.QubitStateVector(state, wires=[0, 1])
qml.CRot(params[0], params[1], params[2], wires=[0, 1])
return qml.expval(qml.PauliZ(0))