def test_formula():
M = formula('B4C', density=2.52)
sld, xs, depth = neutron_scattering(M, wavelength=4.75)
# Compare to Alan Munter's numbers:
# SLD=7.65e-6 - 2.34e-7i /A^2
# inc,abs XS = 0.193, 222.4 / cm
# 1/e = 0.004483 cm
# Cu/Mo K-alpha = 2.02e-5 + 1.93e-8i / 2.01e-5 + 4.64e-9i
# Using lambda=1.798 rather than 1.8
# abs XS => 222.6
# 1/e => 0.004478
assert abs(sld[0] - 7.649) < 0.001
assert abs(sld[1] - 0.234) < 0.001
assert abs(xs[1] - 222.6) < 0.1
#assert abs(xs[2]-0.193)<0.001 # TODO: fix test
#assert abs(depth-0.004478)<0.000001 # TODO: fix test
# Check that sld_inc and coh_xs are consistent
# cell_volume = (molar_mass/density) / N_A * 1e24
# number_density = num_atoms/cell_volume
# sigma_i = inc_xs/number_density
# sld_inc = number_density * sqrt ( 100/(4*pi) * sigma_i ) * 10
# sld_re = number_density * b_c * 10
# sigma_c = 4*pi/100*b_c**2
# coh_xs = sigma_c * number_density
Nb = 0.13732585020640778
sld_inc = Nb * sqrt(100 / (4 * pi) * xs[2] / Nb) * 10
coh_xs = Nb * 4 * pi / 100 * (sld[0] / (10 * Nb))**2
assert abs(sld[2] - sld_inc) < 1e-14
assert abs(xs[0] - coh_xs) < 1e-14
def test_formula():
M = formula('B4C', density=2.52)
sld,xs,depth = neutron_scattering(M,wavelength=4.75)
# Compare to Alan Munter's numbers:
# SLD=7.65e-6 - 2.34e-7i /A^2
# inc,abs XS = 0.193, 222.4 / cm
# 1/e = 0.004483 cm
# Cu/Mo K-alpha = 2.02e-5 + 1.93e-8i / 2.01e-5 + 4.64e-9i
# Using lambda=1.798 rather than 1.8
# abs XS => 222.6
# 1/e => 0.004478
assert abs(sld[0]-7.649)<0.001
assert abs(sld[1]-0.234)<0.001
assert abs(xs[1]-222.6)<0.1
#assert abs(xs[2]-0.193)<0.001 # TODO: fix test
#assert abs(depth-0.004478)<0.000001 # TODO: fix test
# Check that sld_inc and coh_xs are consistent
# cell_volume = (molar_mass/density) / N_A * 1e24
# number_density = num_atoms/cell_volume
# sigma_i = inc_xs/number_density
# sld_inc = number_density * sqrt ( 100/(4*pi) * sigma_i ) * 10
# sld_re = number_density * b_c * 10
# sigma_c = 4*pi/100*b_c**2
# coh_xs = sigma_c * number_density
Nb = 0.13732585020640778
sld_inc = Nb*sqrt(100/(4*pi)*xs[2]/Nb)*10
coh_xs = Nb*4*pi/100*(sld[0]/(10*Nb))**2
assert abs(sld[2] - sld_inc) < 1e-14
assert abs(xs[0] - coh_xs) < 1e-14
def test_neutron_sld(self):
"""
test sld
"""
#Compute incoherence , absorption, and incoherence
(sld_real,sld_im,sld_inc), (coh,abs,incoh), length = neutron_scattering(self.compound,
density=self.density, wavelength=self.wavelength)
cu_real, cu_im = calculate_xray_sld(element="Cu", density=self.density,
molecule_formula=self.sld_formula)
mo_real, mo_im = calculate_xray_sld(element="Mo", density=self.density,
molecule_formula=self.sld_formula)
#test sld
self.assertAlmostEquals(sld_real * _SCALE, 1.04e-6, 1)
self.assertAlmostEquals(sld_im * _SCALE, -1.5e-7, 1)
#test absorption value
self.assertAlmostEquals(abs, 180.0,0)
self.assertAlmostEquals(incoh, 0.0754, 2)
#Test length
self.assertAlmostEquals(length, 0.005551, 4)
#test Cu sld
self.assertAlmostEquals(cu_real * _SCALE, 2.89e-5, 1)
self.assertAlmostEquals(cu_im * _SCALE, 2.81e-6)
# test Mo sld
self.assertAlmostEquals(mo_real * _SCALE, 2.84e-5, 1)
self.assertAlmostEquals(mo_im * _SCALE, 7.26e-7,1)
def test_neutron_sld(self):
"""
test sld
"""
#Compute incoherence , absorption, and incoherence
(sld_real,sld_im,sld_inc), (coh,abs,incoh), length = neutron_scattering(self.compound,
density=self.density, wavelength=self.wavelength)
cu_real, cu_im = calculate_xray_sld(element="Cu", density=self.density,
molecule_formula=self.sld_formula)
mo_real, mo_im = calculate_xray_sld(element="Mo", density=self.density,
molecule_formula=self.sld_formula)
#test sld
self.assertAlmostEquals(sld_real * _SCALE, 6.33e-6, 1)
self.assertAlmostEquals(sld_im * _SCALE, 0)
#test absorption value
self.assertAlmostEquals(abs, 1.35e-4, 2)
self.assertAlmostEquals(incoh, 0.138, 2)
#Test length
self.assertAlmostEquals(length, 1.549, 3)
#test Cu sld
self.assertAlmostEquals(cu_real * _SCALE, 9.36e-6, 1)
self.assertAlmostEquals(cu_im * _SCALE, 2.98e-8)
# test Mo sld
self.assertAlmostEquals(mo_real * _SCALE, 9.33e-6)
self.assertAlmostEquals(mo_im * _SCALE, 5.59e-9,1)
def test_neutron_sld(self):
"""
test sld
"""
#Compute incoherence , absorption, and incoherence
(sld_real, sld_im, sld_inc), (coh, abs,
incoh), length = neutron_scattering(
self.compound,
density=self.density,
wavelength=self.wavelength)
cu_real, cu_im = calculate_xray_sld(element="Cu",
density=self.density,
molecule_formula=self.sld_formula)
mo_real, mo_im = calculate_xray_sld(element="Mo",
density=self.density,
molecule_formula=self.sld_formula)
#test sld
self.assertAlmostEquals(sld_real * _SCALE, 1.04e-6, 1)
self.assertAlmostEquals(sld_im * _SCALE, -1.5e-7, 1)
#test absorption value
self.assertAlmostEquals(abs, 180.0, 0)
self.assertAlmostEquals(incoh, 0.0754, 2)
#Test length
self.assertAlmostEquals(length, 0.005551, 4)
#test Cu sld
self.assertAlmostEquals(cu_real * _SCALE, 2.89e-5, 1)
self.assertAlmostEquals(cu_im * _SCALE, 2.81e-6)
# test Mo sld
self.assertAlmostEquals(mo_real * _SCALE, 2.84e-5, 1)
self.assertAlmostEquals(mo_im * _SCALE, 7.26e-7, 1)
def test_neutron_sld(self):
"""
test sld
"""
#Compute incoherence , absorption, and incoherence
(sld_real, sld_im, sld_inc), (coh, abs,
incoh), length = neutron_scattering(
self.compound,
density=self.density,
wavelength=self.wavelength)
cu_real, cu_im = calculate_xray_sld(element="Cu",
density=self.density,
molecule_formula=self.sld_formula)
mo_real, mo_im = calculate_xray_sld(element="Mo",
density=self.density,
molecule_formula=self.sld_formula)
#test sld
self.assertAlmostEquals(sld_real * _SCALE, 6.33e-6, 1)
self.assertAlmostEquals(sld_im * _SCALE, 0)
#test absorption value
self.assertAlmostEquals(abs, 1.35e-4, 2)
self.assertAlmostEquals(incoh, 0.138, 2)
#Test length
self.assertAlmostEquals(length, 1.549, 3)
#test Cu sld
self.assertAlmostEquals(cu_real * _SCALE, 9.36e-6, 1)
self.assertAlmostEquals(cu_im * _SCALE, 2.98e-8)
# test Mo sld
self.assertAlmostEquals(mo_real * _SCALE, 9.33e-6)
self.assertAlmostEquals(mo_im * _SCALE, 5.59e-9, 1)
def calculate(self):
compound = self.get_compound()
wavelength_n = self.get_neutron_wavelength()
wavelength_x = self.get_xray_wavelength()
thickness = self.get_thickness()
if compound is None or compound.density is None or wavelength_x is None or wavelength_n is None or thickness is None:
return
res = neutron_scattering(compound,
density=compound.density,
wavelength=wavelength_n)
if res == (None, None, None):
hightlight(self.ui.lE_SLD_sample_material)
self._log_ex("missing neutron cross sections")
return
try:
self.calculate_penetration_depth(compound, wavelength_n,
wavelength_x, thickness)
self.calculate_sld(compound, wavelength_n, wavelength_x)
self.calculate_cross_sections(compound, wavelength_n, wavelength_x)
self.calculate_critical_reflection(wavelength_n, wavelength_x)
except Exception as e:
self._log_ex(e)
def test_neutron_sld(self):
"""
test sld
"""
#Compute incoherence , absorption, and incoherence
(sld_real, sld_im, sld_inc), (coh, abs,
incoh), length = neutron_scattering(
self.compound,
density=self.density,
wavelength=self.wavelength)
cu_real, cu_im = calculate_xray_sld(element="Cu",
density=self.density,
molecule_formula=self.sld_formula)
mo_real, mo_im = calculate_xray_sld(element="Mo",
density=self.density,
molecule_formula=self.sld_formula)
#test sld
self.assertAlmostEqual(sld_real * _SCALE, -5.6e-7, 1)
self.assertAlmostEqual(sld_im * _SCALE, 0)
#test absorption value
self.assertAlmostEqual(abs, 0.0741, 2)
self.assertAlmostEqual(incoh, 5.62, 2)
#Test length
self.assertAlmostEqual(length, 0.1755, 3)
#test Cu sld
self.assertAlmostEqual(cu_real * _SCALE, 9.46e-6, 1)
self.assertAlmostEqual(cu_im * _SCALE, 3.01e-8)
# test Mo sld
self.assertAlmostEqual(mo_real * _SCALE, 9.43e-6)
self.assertAlmostEqual(mo_im * _SCALE, 5.65e-7, 1)
def calculateSld(self, event):
"""
Calculate the neutron scattering density length of a molecule
"""
self.clear_outputs()
try:
#Check validity user inputs
flag, msg = self.check_inputs()
if self.base is not None and msg.lstrip().rstrip() != "":
msg = "SLD Calculator: %s" % str(msg)
wx.PostEvent(self.base, StatusEvent(status=msg))
if not flag:
return
#get ready to compute
self.sld_formula = formula(self.compound, density=self.density)
(sld_real, sld_im, _), (_, absorp, incoh), \
length = neutron_scattering(compound=self.compound,
density=self.density,
wavelength=self.neutron_wavelength)
if self.xray_source == "[A]":
energy = xray_energy(self.xray_source_input)
xray_real, xray_im = xray_sld_from_atoms(
self.sld_formula.atoms,
density=self.density,
energy=energy)
elif self.xray_source == "[keV]":
xray_real, xray_im = xray_sld_from_atoms(
self.sld_formula.atoms,
density=self.density,
energy=self.xray_source_input)
elif self.xray_source == "Element":
xray_real, xray_im = self.calculate_sld_helper(
element=self.xray_source_input,
density=self.density,
molecule_formula=self.sld_formula)
# set neutron sld values
val = format_number(sld_real * _SCALE)
self.neutron_sld_real_ctl.SetValue(val)
val = format_number(math.fabs(sld_im) * _SCALE)
self.neutron_sld_im_ctl.SetValue(val)
# Compute the Cu SLD
self.xray_sld_real_ctl.SetValue(format_number(xray_real * _SCALE))
val = format_number(math.fabs(xray_im) * _SCALE)
self.xray_sld_im_ctl.SetValue(val)
# set incoherence and absorption
self.neutron_inc_ctl.SetValue(format_number(incoh))
self.neutron_abs_ctl.SetValue(format_number(absorp))
# Neutron length
self.neutron_length_ctl.SetValue(format_number(length))
# display wavelength
#self.wavelength_ctl.SetValue(str(self.wavelength))
#self.wavelength_ctl.SetValue(str(self.wavelength))
except:
if self.base is not None:
msg = "SLD Calculator: %s" % (sys.exc_value)
wx.PostEvent(self.base, StatusEvent(status=msg))
if event is not None:
event.Skip()
def calculateSld(self, event):
"""
Calculate the neutron scattering density length of a molecule
"""
self.clear_outputs()
try:
#Check validity user inputs
flag, msg = self.check_inputs()
if self.base is not None and msg.lstrip().rstrip() != "":
msg = "SLD Calculator: %s" % str(msg)
wx.PostEvent(self.base, StatusEvent(status=msg))
if not flag:
return
#get ready to compute
self.sld_formula = formula(self.compound,
density=self.density)
(sld_real, sld_im, _), (_, absorp, incoh), \
length = neutron_scattering(compound=self.compound,
density=self.density,
wavelength=self.neutron_wavelength)
if self.xray_source == "[A]":
energy = xray_energy(self.xray_source_input)
xray_real, xray_im = xray_sld_from_atoms(self.sld_formula.atoms,
density=self.density,
energy=energy)
elif self.xray_source == "[keV]":
xray_real, xray_im = xray_sld_from_atoms(self.sld_formula.atoms,
density=self.density,
energy=self.xray_source_input)
elif self.xray_source == "Element":
xray_real, xray_im = self.calculate_sld_helper(element=self.xray_source_input,
density=self.density,
molecule_formula=self.sld_formula)
# set neutron sld values
val = format_number(sld_real * _SCALE)
self.neutron_sld_real_ctl.SetValue(val)
val = format_number(math.fabs(sld_im) * _SCALE)
self.neutron_sld_im_ctl.SetValue(val)
# Compute the Cu SLD
self.xray_sld_real_ctl.SetValue(format_number(xray_real * _SCALE))
val = format_number(math.fabs(xray_im) * _SCALE)
self.xray_sld_im_ctl.SetValue(val)
# set incoherence and absorption
self.neutron_inc_ctl.SetValue(format_number(incoh))
self.neutron_abs_ctl.SetValue(format_number(absorp))
# Neutron length
self.neutron_length_ctl.SetValue(format_number(length))
# display wavelength
#self.wavelength_ctl.SetValue(str(self.wavelength))
#self.wavelength_ctl.SetValue(str(self.wavelength))
except:
if self.base is not None:
msg = "SLD Calculator: %s" % (sys.exc_value)
wx.PostEvent(self.base, StatusEvent(status=msg))
if event is not None:
event.Skip()
def calculate_penetration_depth(self, compound, wavelength_n, wavelength_x,
thickness):
_, xs, _ = neutron_scattering(compound,
density=compound.density,
wavelength=wavelength_n)
sld_x_real, sld_x_imag = xray_sld(compound,
density=compound.density,
wavelength=wavelength_x)
xs_coh, xs_abs, xs_incoh = xs
p_abs, p_abs_incoh, p_abs_incoh_coh = [
1 / xs_abs, 1 / (xs_abs + xs_incoh),
1 / (xs_abs + xs_coh + xs_incoh)
]
p_abs_r, p_abs_incoh_r, p_abs_incoh_coh_r = self._r(
[p_abs, p_abs_incoh, p_abs_incoh_coh])
# not 100% sure about the 1/2...
p_abs_xray = 1 / (2 * wavelength_x * sld_x_imag * 1e-6) * 1e-4
tr_att = lambda d, pen: (np.exp(-d / pen) * 100, np.exp(d / pen))
# thickness is in [m], p_abs_incoh in [cm], thus 1e-2
tr_n, att_n = tr_att(thickness, p_abs_incoh * 1e-2)
# p_abs_xray in [µm], thus 1e-6
tr_x, att_x = tr_att(thickness, p_abs_xray * 1e-6)
self.ui.lE_SLD_pendepth_neutron_abs.setText(f"{p_abs_r}")
self.ui.lE_SLD_pendepth_neutron_abs_incoh.setText(f"{p_abs_incoh_r}")
self.ui.lE_SLD_pendepth_neutron_abs_incoh_coh.setText(
f"{p_abs_incoh_coh_r}")
self.ui.lE_SLD_pendepth_neutron_transmission.setText(f"{tr_n} %")
self.ui.lE_SLD_pendepth_neutron_attenuation.setText(f"{att_n}")
self.ui.lE_SLD_pendepth_xray_abs.setText(f"{self._r(p_abs_xray)}")
self.ui.lE_SLD_pendepth_xray_transmission.setText(f"{tr_x} %")
self.ui.lE_SLD_pendepth_xray_attenuation.setText(f"{att_x}")
def test():
H, He, D, O = elements.H, elements.He, elements.D, elements.O
assert H.neutron.absorption == 0.3326
assert H.neutron.total == 82.02
assert H.neutron.incoherent == 80.26
assert H.neutron.coherent == 1.7568
assert elements.Ru[101].neutron.bp == None
assert H[1].nuclear_spin == '1/2'
assert H[2].nuclear_spin == '1'
assert not H[6].neutron.has_sld()
assert He[3].neutron.b_c_i == -1.48
assert He[3].neutron.bm_i == -5.925
Nb = elements.Nb
assert Nb.neutron.absorption == Nb[93].neutron.absorption
# Check that b_c values match abundance-weighted values
# Note: Currently they do not for match within 5% for Ar,V,Sm or Gd
for el in elements:
if not hasattr(el, 'neutron'): continue
b_c = 0
complete = True
for iso in el:
if iso.neutron != None:
if iso.neutron.b_c == None:
complete = False
else:
b_c += iso.neutron.b_c * iso.neutron.abundance / 100.
if complete and b_c != 0 and abs((b_c - el.neutron.b_c) / b_c) > 0.05:
err = abs((b_c - el.neutron.b_c) / b_c)
## Printing suppressed for the release version
#print("%2s %.3f % 7.3f % 7.3f"%(el.symbol,err,b_c,el.neutron.b_c))
# Check neutron_sld and neutron_xs against NIST calculator
# Note that we are using different tables, so a general comparison with
# NIST numbers is not possible, but ^30Si and ^18O are the same in both.
M = formula('Si[30]O[18]2', density=2.2)
sld, xs, depth = neutron_scattering(M, wavelength=4.75)
sld2 = neutron_sld(M, wavelength=4.75)
assert all(abs(v - w) < 1e-10 for v, w in zip(sld, sld2))
#_summarize(M)
#_summarize(formula('O2',density=1.14))
# Alan's numbers:
assert abs(sld[0] - 3.27) < 0.01
assert abs(sld[1] - 0) < 0.01
#assert abs(xs[2] - 0.00292) < 0.00001 # TODO fix test
assert abs(xs[1] - 0.00569) < 0.00001
#assert abs(depth - 4.329) < 0.001 # TODO fix test
# Cu/Mo K-alpha = 1.89e-5 + 2.45e-7i / 1.87e-5 + 5.16e-8i
Ni, Si = elements.Ni, elements.Si
# Make sure molecular calculation corresponds to direct calculation
sld = neutron_sld('Si', density=Si.density, wavelength=4.75)
sld2 = Si.neutron.sld(wavelength=4.75)
assert all(abs(v - w) < 1e-10 for v, w in zip(sld, sld2))
sld, _, _ = Si.neutron.scattering(wavelength=4.75)
sld2 = Si.neutron.sld(wavelength=4.75)
assert all(abs(v - w) < 1e-10 for v, w in zip(sld, sld2))
sld, xs, depth = neutron_scattering('Si',
density=Si.density,
wavelength=4.75)
sld2, xs2, depth2 = Si.neutron.scattering(wavelength=4.75)
assert all(abs(v - w) < 1e-10 for v, w in zip(sld, sld2))
assert all(abs(v - w) < 1e-10 for v, w in zip(xs, xs2))
assert abs(depth - depth2) < 1e-14
# incoherent cross sections for Ni[62] used to be negative
sld, xs, depth = neutron_scattering('Ni[62]',
density=Ni[62].density,
wavelength=4.75)
assert sld[2] == 0 and xs[2] == 0
sld, xs, depth = Ni[62].neutron.scattering(wavelength=4.75)
assert sld[2] == 0 and xs[2] == 0
assert Ni[62].neutron.sld()[2] == 0
# Test call from periodictable
sld, xs, depth = periodictable.neutron_scattering('H2O',
density=1,
wavelength=4.75)
sld2, xs2, depth2 = neutron_scattering('H2O', density=1, wavelength=4.75)
assert all(abs(v - w) < 1e-10 for v, w in zip(sld, sld2))
assert all(abs(v - w) < 1e-10 for v, w in zip(xs, xs2))
assert depth == depth2
sld = periodictable.neutron_sld('H2O', density=1, wavelength=4.75)
assert all(abs(v - w) < 1e-10 for v, w in zip(sld, sld2))
# Check empty formula
sld, xs, depth = neutron_scattering('', density=0, wavelength=4.75)
assert all(v == 0 for v in sld)
assert all(v == 0 for v in xs)
assert np.isinf(depth)
# Check density == 0 works
sld, xs, depth = neutron_scattering('Si', density=0, wavelength=4.75)
assert all(v == 0 for v in sld)
assert all(v == 0 for v in xs)
assert np.isinf(depth)
# Test natural density
D2O_density = (2 * D.mass + O.mass) / (2 * H.mass + O.mass)
sld, xs, depth = neutron_scattering('D2O',
natural_density=1,
wavelength=4.75)
sld2, xs2, depth2 = neutron_scattering('D2O',
density=D2O_density,
wavelength=4.75)
assert all(abs(v - w) < 1e-14 for v, w in zip(sld, sld2))
assert all(abs(v - w) < 1e-14 for v, w in zip(xs, xs2))
assert abs(depth - depth2) < 1e-14
# Test that sld depends on density not on the size of the unit cell
D2O_density = (2 * D.mass + O.mass) / (2 * H.mass + O.mass)
sld, xs, depth = neutron_scattering('D2O',
natural_density=1,
wavelength=4.75)
sld2, xs2, depth2 = neutron_scattering('2D2O',
natural_density=1,
wavelength=4.75)
assert all(abs(v - w) < 1e-14 for v, w in zip(sld, sld2))
assert all(abs(v - w) < 1e-14 for v, w in zip(xs, xs2))
assert abs(depth - depth2) < 1e-14
# Test energy <=> velocity <=> wavelength
assert abs(
nsf.neutron_wavelength_from_velocity(2200) -
1.7981972618436388) < 1e-14
assert abs(nsf.neutron_wavelength(25) - 1.8) < 0.1
assert abs(nsf.neutron_energy(nsf.neutron_wavelength(25)) - 25) < 1e-14
# Confirm scattering functions accept energy and wavelength
sld, xs, depth = neutron_scattering('H2O', density=1, wavelength=4.75)
sld2, xs2, depth2 = neutron_scattering('H2O',
density=1,
energy=nsf.neutron_energy(4.75))
assert all(abs(v - w) < 1e-14 for v, w in zip(sld, sld2))
assert all(abs(v - w) < 1e-14 for v, w in zip(xs, xs2))
assert abs(depth - depth2) < 1e-14
def test():
H,He,D,O = elements.H,elements.He,elements.D,elements.O
assert H.neutron.absorption == 0.3326
assert H.neutron.total == 82.02
assert H.neutron.incoherent == 80.26
assert H.neutron.coherent == 1.7568
assert elements.Ru[101].neutron.bp == None
assert H[1].nuclear_spin == '1/2'
assert H[2].nuclear_spin == '1'
assert not H[6].neutron.has_sld()
assert He[3].neutron.b_c_i == -1.48
assert He[3].neutron.bm_i == -5.925
Nb = elements.Nb
assert Nb.neutron.absorption == Nb[93].neutron.absorption
# Check that b_c values match abundance-weighted values
# Note: Currently they do not for match within 5% for Ar,V,Sm or Gd
for el in elements:
if not hasattr(el,'neutron'): continue
b_c = 0
complete = True
for iso in el:
if iso.neutron != None:
if iso.neutron.b_c == None:
complete = False
else:
b_c += iso.neutron.b_c*iso.neutron.abundance/100.
if complete and b_c != 0 and abs((b_c-el.neutron.b_c)/b_c) > 0.05:
err = abs((b_c-el.neutron.b_c)/b_c)
## Printing suppressed for the release version
#print("%2s %.3f % 7.3f % 7.3f"%(el.symbol,err,b_c,el.neutron.b_c))
# Check neutron_sld and neutron_xs against NIST calculator
# Note that we are using different tables, so a general comparison with
# NIST numbers is not possible, but ^30Si and ^18O are the same in both.
M = formula('Si[30]O[18]2',density=2.2)
sld,xs,depth = neutron_scattering(M,wavelength=4.75)
sld2 = neutron_sld(M,wavelength=4.75)
assert all(abs(v-w)<1e-10 for v,w in zip(sld,sld2))
#_summarize(M)
#_summarize(formula('O2',density=1.14))
# Alan's numbers:
assert abs(sld[0] - 3.27) < 0.01
assert abs(sld[1] - 0) < 0.01
#assert abs(xs[2] - 0.00292) < 0.00001 # TODO fix test
assert abs(xs[1] - 0.00569) < 0.00001
#assert abs(depth - 4.329) < 0.001 # TODO fix test
# Cu/Mo K-alpha = 1.89e-5 + 2.45e-7i / 1.87e-5 + 5.16e-8i
Ni,Si = elements.Ni, elements.Si
# Make sure molecular calculation corresponds to direct calculation
sld = neutron_sld('Si',density=Si.density,wavelength=4.75)
sld2 = Si.neutron.sld(wavelength=4.75)
assert all(abs(v-w)<1e-10 for v,w in zip(sld,sld2))
sld,_,_ = Si.neutron.scattering(wavelength=4.75)
sld2 = Si.neutron.sld(wavelength=4.75)
assert all(abs(v-w)<1e-10 for v,w in zip(sld,sld2))
sld,xs,depth = neutron_scattering('Si',density=Si.density,wavelength=4.75)
sld2,xs2,depth2 = Si.neutron.scattering(wavelength=4.75)
assert all(abs(v-w)<1e-10 for v,w in zip(sld,sld2))
assert all(abs(v-w)<1e-10 for v,w in zip(xs,xs2))
assert abs(depth-depth2) < 1e-14
# incoherent cross sections for Ni[62] used to be negative
sld,xs,depth = neutron_scattering('Ni[62]',density=Ni[62].density,
wavelength=4.75)
assert sld[2] == 0 and xs[2] == 0
sld,xs,depth = Ni[62].neutron.scattering(wavelength=4.75)
assert sld[2] == 0 and xs[2] == 0
assert Ni[62].neutron.sld()[2] == 0
# Test call from periodictable
sld,xs,depth = periodictable.neutron_scattering('H2O',density=1,wavelength=4.75)
sld2,xs2,depth2 = neutron_scattering('H2O',density=1,wavelength=4.75)
assert all(abs(v-w)<1e-10 for v,w in zip(sld,sld2))
assert all(abs(v-w)<1e-10 for v,w in zip(xs,xs2))
assert depth==depth2
sld = periodictable.neutron_sld('H2O',density=1,wavelength=4.75)
assert all(abs(v-w)<1e-10 for v,w in zip(sld,sld2))
# Check empty formula
sld,xs,depth = neutron_scattering('',density=0,wavelength=4.75)
assert all(v == 0 for v in sld)
assert all(v == 0 for v in xs)
assert numpy.isinf(depth)
# Check density == 0 works
sld,xs,depth = neutron_scattering('Si',density=0,wavelength=4.75)
assert all(v == 0 for v in sld)
assert all(v == 0 for v in xs)
assert numpy.isinf(depth)
# Test natural density
D2O_density = (2*D.mass + O.mass)/(2*H.mass + O.mass)
sld,xs,depth = neutron_scattering('D2O',natural_density=1,wavelength=4.75)
sld2,xs2,depth2 = neutron_scattering('D2O',density=D2O_density,wavelength=4.75)
assert all(abs(v-w)<1e-14 for v,w in zip(sld,sld2))
assert all(abs(v-w)<1e-14 for v,w in zip(xs,xs2))
assert abs(depth-depth2)<1e-14
# Test that sld depends on density not on the size of the unit cell
D2O_density = (2*D.mass + O.mass)/(2*H.mass + O.mass)
sld,xs,depth = neutron_scattering('D2O',natural_density=1,wavelength=4.75)
sld2,xs2,depth2 = neutron_scattering('2D2O',natural_density=1,wavelength=4.75)
assert all(abs(v-w)<1e-14 for v,w in zip(sld,sld2))
assert all(abs(v-w)<1e-14 for v,w in zip(xs,xs2))
assert abs(depth-depth2)<1e-14
# Test energy <=> velocity <=> wavelength
assert abs(nsf.neutron_wavelength_from_velocity(2200) - 1.7981972618436388) < 1e-14
assert abs(nsf.neutron_wavelength(25) - 1.8) < 0.1
assert abs(nsf.neutron_energy(nsf.neutron_wavelength(25)) - 25) < 1e-14
# Confirm scattering functions accept energy and wavelength
sld,xs,depth = neutron_scattering('H2O',density=1,wavelength=4.75)
sld2,xs2,depth2 = neutron_scattering('H2O',density=1,energy=nsf.neutron_energy(4.75))
assert all(abs(v-w)<1e-14 for v,w in zip(sld,sld2))
assert all(abs(v-w)<1e-14 for v,w in zip(xs,xs2))
assert abs(depth-depth2)<1e-14
