def temperatureThread():
OOO=" "
printer.p(OOO+"temperatureThread === checking in...")
global thermoString
global fthermo
printer.p(OOO+"temperatureThread === entering circuit...")
while zerog.alive:
try:
catdata = subprocess.Popen(['cat',thermo_sensor], stdout=subprocess.PIPE, stderr=subprocess.PIPE)
out,err = catdata.communicate()
out_decode = out.decode('utf-8')
lines = out_decode.split('\n')
#f = open(thermo_sensor, 'r')
#lines = f.readlines()
#f.close()
if lines[0].strip()[-3:] != 'YES':
return 0
thermo_output = lines[1].find('t=')
if thermo_output != -1:
thermo_string = lines[1].strip()[thermo_output+2:]
thermo_c = float(thermo_string) / 1000.0
thermo_f = thermo_c * 9.0 / 5.0 + 32.0
fthermo=math.floor(thermo_f*10)/10
#fthermo=thermo_calibrate(thermo_f)
thermoString=str(thermo_calibrate(fthermo))+" °F"
except:
thermoString="I can't feel the water"
pass
def musicThread():
OOO=" "
printer.p(OOO+"musicThread === checking in...")
global jack_in_use
global jack_plugged_in
global jack_unplugged
#global fade
global faded_out
global unfaded
pygame.mixer.init()
pygame.mixer.music.load(abspath+"default.mp3")
printer.p(OOO+"musicThread === entering circuit...")
while zerog.alive:
pygame.mixer.music.play()
#print("play")
printer.p(OOO+"musicThread === play...")
while pygame.mixer.music.get_busy() == True:
if (jack_plugged_in and not nojack) or (zerog.fade==1 and not faded_out and (not jack_in_use or nojack)):
printer.p(OOO+"musicThread === pause...")
pygame.mixer.music.pause()
if not nojack: jack_plugged_in=False
faded_out=True
if zerog.fade!=1 and (jack_unplugged or (not unfaded and not jack_in_use)):
printer.p(OOO+"musicThread === ...unpause")
pygame.mixer.music.unpause()
jack_unplugged=False
unfaded=True
continue
continue
def screenshotThread():
OOO=" "
global req
global alive
printer.p(OOO+"screenshotThread === checking in...")
n=0
while alive:
#if time.time()-start>20: alive=False #autorestart
if myID==IDcheck and req==1:
#pyautogui.screenshot("screenshot.png")
img=pyautogui.screenshot()
try:
img.save(abspath+"screenshot.jpg", "JPEG", quality=0, optimize=True, progressive=False)
n+=1
except:
printer.p(OOO+"screenshotThread === couldn't save it?")
pass
try:
files = {'media': open(abspath+'screenshot.jpg', 'rb')}
r=requests.post('http://'+ip+'/zerog/upload.php', files=files)
printer.p(OOO+"screenshotThread === screenshot#"+str(n))
except:
printer.p(OOO+"screenshotThread === couldn't upload it?")
pass
else: time.sleep(5)
printer.p(OOO+"screenshotThread === ...checking out")
def screenshotThread():
OOO = " "
global req
global alive
printer.p(OOO + "screenshotThread === checking in...")
n = 0
while alive:
#if time.time()-start>20: alive=False #autorestart
if myID == IDcheck and req == 1:
#pyautogui.screenshot("screenshot.png")
img = pyautogui.screenshot()
try:
img.save(abspath + "screenshot.jpg",
"JPEG",
quality=0,
optimize=True,
progressive=False)
n += 1
except:
printer.p(OOO + "screenshotThread === couldn't save it?")
pass
try:
files = {'media': open(abspath + 'screenshot.jpg', 'rb')}
r = requests.post('http://' + ip + '/zerog/upload.php',
files=files)
printer.p(OOO + "screenshotThread === screenshot#" + str(n))
except:
printer.p(OOO + "screenshotThread === couldn't upload it?")
pass
else:
time.sleep(5)
printer.p(OOO + "screenshotThread === ...checking out")
def command_setup(self):
"""
Series of common setup tasks across all commands
self: WindowCommand context
returns True for success, False for an error
"""
try:
success = True
self.view = self.window.active_view()
self.view.filename = self.view.file_name()
config = backend({
'filename': self.view.filename,
'command': 'get-config'
})
self.window.config = json.loads(config)
p('parsed config from backend', self.window.config)
return success
except Exception as e:
p(e)
show_error(e, True)
return False
def command_setup(self):
"""
Series of common setup tasks across all commands
self: WindowCommand context
returns True for success, False for an error
"""
try:
success = True
self.view = self.window.active_view()
self.view.filename = self.view.file_name()
config = backend({
'filename': self.view.filename,
'command': 'get-config'
})
self.window.config = json.loads(config)
p('parsed config from backend', self.window.config)
return success
except Exception as e:
p(e)
show_error(e, True)
return False
def baseThread():
OOO = " "
printer.p(OOO + "baseThread === checking in...")
global baseComplete
printer.fileUpdate(ip, "unabstractor.py", "unabstractor.py")
call(['python3', '/home/pi/Desktop/unabstractor.py'])
baseComplete = True
printer.p(OOO + "baseThread === ...checking out")
def baseThread():
OOO=" "
printer.p(OOO+"baseThread === checking in...")
global baseComplete
printer.fileUpdate(ip,"unabstractor.py","unabstractor.py")
call(['python3','/home/pi/Desktop/unabstractor.py'])
baseComplete=True
printer.p(OOO+"baseThread === ...checking out")
def checkOut():
printer.fileUpdate(ip, myname, myname)
printer.p(msg + "<br>" + msg + "<br>" + msg)
#if printer.fin('floatInProgress')=='False':
#printer.p(myname+"t-start:"+str(time.time()-start))
# printer.p(myname+" ... 10" second delay")
# time.sleep(10)
#while time.time()-start<20: continue
printer.goodbye(myname, version)
def checkOut():
printer.fileUpdate(ip,myname,myname)
printer.p(msg+"<br>"+msg+"<br>"+msg)
#if printer.fin('floatInProgress')=='False':
#printer.p(myname+"t-start:"+str(time.time()-start))
# printer.p(myname+" ... 10" second delay")
# time.sleep(10)
#while time.time()-start<20: continue
printer.goodbye(myname,version)
def desc_yard(data):
"""Describe current yard situation."""
toys = [item for item in data["yard"]]
printer.p(
data["prefix"], "You have {0} total spaces on your lawn".format(6))
# TODO: have this reflect size
for toy in toys:
occupants = toy["occupant"] or ["no one"]
printer.p(
data["prefix"], "You have a {0} being used by {1}".format(
toy["name"], ", and ".join(occupants)))
def find_base_path(filename):
"""
Finds the most relevant folder to the currently active filename
to serve as the base path of the current
"""
starting_dir = os.path.dirname(filename)
p('starting search for .deprc in: ', starting_dir)
folder_with_deprc = get_folder_with_deprc(starting_dir)
p('Closest folder with a deprc:', folder_with_deprc)
return folder_with_deprc
def find_base_path(filename):
"""
Finds the most relevant folder to the currently active filename
to serve as the base path of the current
"""
starting_dir = os.path.dirname(filename)
p('starting search for .deprc in: ', starting_dir)
folder_with_deprc = get_folder_with_deprc(starting_dir)
p('Closest folder with a deprc:', folder_with_deprc)
return folder_with_deprc
def collect_money(data):
"""Collect money left by cats."""
if len(data["pending_money"]) == 0:
printer.p("{.YELLOW}[$$$$$$]{.ENDC}".format(
printer.PColors,
printer.PColors), "Sorry, no cats have left you anything")
return
for i in range(len(data["pending_money"])):
money = data["pending_money"].pop()
printer.p("{.GREEN}[$$$$$$]{.ENDC}".format(
printer.PColors,
printer.PColors), "Yes! {0} left you {1} fish!".format(
money[0], str(money[1])))
data["s_fish"] += money[1]
def lightThread():
global client
global extraWhite
OOO=" "
printer.p(OOO+"lightThread === checking in...")
def rcol(t,d): return math.floor(255*d*(0.6+.4*math.sin(time.time()*1+t/30*3.14)))
def gcol(t,d): return math.floor(255*d*0.1)
def bcol(t,d): return math.floor(255*d*1.0)
def wcol(t,d): return math.floor(255*d*0.5)
LEDzero=False
while zerog.alive:
DIM=1-zerog.fade
extraWhite=0
if lightMode:
DIM=1
extraWhite=127
if alertMode:
DIM=.65+.35*math.sin((time.time())*3.14)
color = [ (0,0,0) ] * numLEDs
if zerog.lightsOkay or lightMode or alertMode:
LEDzero=False
for i in range(0,numLEDs,4):
wcolAdjusted1=wcol(i+0,DIM)+extraWhite
wcolAdjusted2=wcol(i+1,DIM)+extraWhite
wcolAdjusted3=wcol(i+2,DIM)+extraWhite
if wcolAdjusted1>255: wcolAdjusted1=255
if wcolAdjusted2>255: wcolAdjusted2=255
if wcolAdjusted3>255: wcolAdjusted3=255
color[i+0]=(rcol(i+0,DIM),gcol(i+0,DIM),bcol(i+0,DIM))
color[i+1]=(gcol(i+1,DIM),wcolAdjusted1,rcol(i+1,DIM))
color[i+2]=(wcolAdjusted2,bcol(i+1,DIM),gcol(i+2,DIM))
color[i+3]=(bcol(i+2,DIM),rcol(i+2,DIM),wcolAdjusted3)
client.put_pixels(color)
elif not zerog.lightsOkay and not LEDzero:
printer.p("darkness")
client.put_pixels([ (0,0,0) ] * numLEDs)
LEDzero=True
#if zerog.alertMode: time.sleep(.5)
#else: time.sleep(3)
time.sleep(1)
def trim_paths_of_root(files, root):
"""
Returns the filepaths for each file minus the root
"""
trimmed = []
root = normalize_trailing_slash(root)
for f in files:
if f:
try:
filename = f[f.index(root) + len(root):]
p('trimmed ', root, 'from', f, 'to', filename)
except:
p('Didn\'t have root', root, ' in path', f)
filename = f
trimmed.append(filename)
return trimmed
def trim_paths_of_root(files, root):
"""
Returns the filepaths for each file minus the root
"""
trimmed = []
root = normalize_trailing_slash(root)
for f in files:
if f:
try:
filename = f[f.index(root) + len(root):]
p('trimmed ', root, 'from', f, 'to', filename)
except:
p('Didn\'t have root', root, ' in path', f)
filename = f
trimmed.append(filename)
return trimmed
def getfileThread():
global filesToGet
global alive
OOO = " "
printer.p(OOO + "getfileThread === checking in...")
if myID == IDcheck:
printer.p(OOO + "getfileThread === ID Checks out")
for fn in filesToGet:
printer.fileUpdate(ip, fn, fn)
printer.p(OOO + "getfileThread === file receiver:" + fn)
continue
printer.p(OOO + "getfileThread === ...checking out")
def getfileThread():
global filesToGet
global alive
OOO=" "
printer.p(OOO+"getfileThread === checking in...")
if myID==IDcheck:
printer.p(OOO+"getfileThread === ID Checks out")
for fn in filesToGet:
printer.fileUpdate(ip,fn,fn)
printer.p(OOO+"getfileThread === file receiver:"+fn)
continue
printer.p(OOO+"getfileThread === ...checking out")
def print_help(data):
"""Print the game help."""
temp = "{.HELP}[Help!]{.ENDC}".format(
printer.PColors, printer.PColors)
printer.p(temp, "Welcome to Neko Atsume!")
printer.p(temp, "In this game cats come to visit you and you feed them")
printer.p(temp, "it's pretty cool, so you should play more")
def get_project_settings(filename):
"""
Returns a settings map that contains project settings
either from a .deprc file or the plugin's sublime-settings file
"""
project_settings_path = os.path.join(find_base_path(filename), '.deprc')
settings = {}
if os.path.exists(project_settings_path):
p('Using found .deprc within: ', project_settings_path)
json_data = open(project_settings_path)
data = json.load(json_data)
json_data.close()
settings = get_settings_from_source(data)
else:
p('Using default settings instead')
settings = get_settings_from_source(sublime.load_settings('Dependents.sublime-settings'))
return settings
def get_project_settings(filename):
"""
Returns a settings map that contains project settings
either from a .deprc file or the plugin's sublime-settings file
"""
project_settings_path = os.path.join(find_base_path(filename), '.deprc')
settings = {}
if os.path.exists(project_settings_path):
p('Using found .deprc within: ', project_settings_path)
json_data = open(project_settings_path)
data = json.load(json_data)
json_data.close()
settings = get_settings_from_source(data)
else:
p('Using default settings instead')
settings = get_settings_from_source(
sublime.load_settings('Dependents.sublime-settings'))
return settings
def ioThread():
OOO = " "
printer.p(OOO + "ioThread === checking in...")
global req
global alive
l = 0
r = 0
while alive:
if myID == IDcheck:
#if time.time()-start>20: alive=False #autorestart
try:
response = requests.post('http://' + ip + '/zerog/getgui.php',
params={"mode": "r"})
j = response.json()
req = int(j['req'])
if req == -1: alive = False
if req != 1: continue
o_l = l
o_r = r
x = int(j['x'])
y = int(j['y'])
l = int(j['l'])
k = int(j['k'])
r = int(j['r'])
printer.p(OOO + "ioThread === xyzlr:" + str(x) + "," + str(y) +
"," + str(l) + "," + str(r) + ", k:" + str(k) +
", req:" + str(req))
pyautogui.moveTo(x, y, 0)
if l == 1 and o_l != 1: pyautogui.mouseDown()
elif l == 0 and o_l != 0: pyautogui.mouseUp()
if r == 1 and o_r != 1: pyautogui.mouseDown(button='right')
elif r == 0 and o_r != 0: pyautogui.mouseUp(button='right')
time.sleep(1)
except:
pass
else:
time.sleep(5)
printer.p(OOO + "ioThread === ...checking out")
def ioThread():
OOO=" "
printer.p(OOO+"ioThread === checking in...")
global req
global alive
l=0
r=0
while alive:
if myID==IDcheck:
#if time.time()-start>20: alive=False #autorestart
try:
response=requests.post('http://'+ip+'/zerog/getgui.php', params={"mode":"r"})
j=response.json()
req=int(j['req'])
if req==-1: alive=False
if req!=1: continue
o_l=l
o_r=r
x=int(j['x'])
y=int(j['y'])
l=int(j['l'])
k=int(j['k'])
r=int(j['r'])
printer.p(OOO+"ioThread === xyzlr:"+str(x)+","+str(y)+","+str(l)+","+str(r)+", k:"+str(k)+", req:"+str(req))
pyautogui.moveTo(x,y,0)
if l==1 and o_l!=1: pyautogui.mouseDown();
elif l==0 and o_l!=0: pyautogui.mouseUp();
if r==1 and o_r!=1: pyautogui.mouseDown(button='right');
elif r==0 and o_r!=0: pyautogui.mouseUp(button='right');
time.sleep(1)
except:
pass
else: time.sleep(5)
printer.p(OOO+"ioThread === ...checking out")
if printer.fin('floatInProgress') =="True": floatInProgress =True
if printer.fin('floatscreen') =="True": floatscreen =True
if printer.fin('playfloat') =="True": playfloat =True
if printer.fin('maintenancescreen')=="True": maintenancescreen=True
if printer.fin('manualfilter') =="True": manualfilter =True
if printer.fin('manualh2o2') =="True": manualh2o2 =True
reloaded=True
if floatpreset==60: min_float=60-2*min_fade
if floatpreset==90: min_float=90-2*min_fade
if floatpreset==-1: min_float=math.floor(custom_duration)-2*min_fade
if not floatInProgress: lightsOkay=True
#printer.p(str(min_float))
printer.p(str(floatstart))
printer.p(str(custom_duration))
printer.p(str(floatpreset))
printer.p(str(max_vol))
printer.p(str(floatInProgress))
printer.p(str(floatscreen))
printer.p(str(playfloat))
printer.p(str(maintenancescreen))
printer.p(str(manualfilter))
printer.p(str(manualh2o2))
gradBarWidth=780
gradBarHeight=108+5
gradBarLeft=(800-gradBarWidth)/2+5
# "guiassets/settings/tester.jpg"]
#
# "guiassets/main/60min.png",
# "guiassets/main/90min.png",
# "guiassets/main/custommin.png",
# "guiassets/main/nonemin.png"]
#
# "splash.png", #?
# "asplashscreen",
#
"zerog.py"]
#=============================================================================================================================================================#
msg=" myID---from---"+myID+" || I || "+IDcheck+"---to---IDcheck"
printer.p(msg)
#----------------------------------------------------------------------I--------------------------------------------------------------------------------------#
import threading
import requests
import pyautogui
import time
from PIL import Image, ImageFile
#from subprocess import call
from threading import Thread
pyautogui.FAILSAFE=False
ImageFile.MAXBLOCK = 2**20
alive=True
def zerogAlive():
global debugstring
global alive,touched,go
global introfade1,introfade2
global layer0,layer1,layer2,layer3,layer4
global floatscreen,maintenancescreen,playfloat,prog
global phonealpha,alpha0,alpha1,alpha2,alpha3,alpha4,gradalpha
global lastPrint,reloaded,stepperSpeed
global min_float,max_vol,lightsOkay,sleepMode
global manualfilter,manualh2o2,overrideWarning
global custom_duration, countdown_num, stopcount, foutTheNewCustomDuration
global floatpreset,floatInProgress,floatelapsed,floatstart,fade,status_str,phase
OOO=" "
printer.p(OOO+"zerogAlive === checking in...")
if develop==1: printer.p(OOO+"zerogAlive === Set to Develop mode...")
printer.p(OOO+"zerogAlive === entering circuit...")
lastTick=time.time()
am=1
pygame.mouse.set_pos(799,479)
while alive:
#clock.tick(30)
am= am*.9 + .1*(time.time()-lastTick)/(1/30)
am= am*.9 + .1*(time.time()-lastTick)/(1/30)
fm=am*2
lastTick=time.time()
for event in pygame.event.get(): continue
#if time.time()-start>6*60*60 and not floatInProgress: alive=False #autorestart
#elif time.time()-start<2:
if time.time()-start<2:
bglogo.set_alpha(introfade1)
introfade1+=10*fm
if introfade1>255: introfade1=255
screen.blit(bglogo,(0,-vOffset))
pygame.display.update()
elif time.time()-start<4:
bg.set_alpha(introfade2)
introfade2+=10*fm
if introfade2>255: introfade2=255
screen.blit(bg,(0,-vOffset)) #yOffset
pygame.display.update()
else:
#mouse position and button clicking
pos = pygame.mouse.get_pos()
(mouseL,mouseM,mouseR) = pygame.mouse.get_pressed()
if mouseL==1 and not touched: touched=True
if mouseL!=1 and touched:
go=True
touched=False
else: go=False
#if not touched: mouseL=1
#go = not mouseL and touched
#=== CHECK IF THE MOUSE IS OVER ANY TARGET ZONES ===
#
on_exit = exit_button.collidepoint(pos)
on_sixtymin = sixtymin_button.collidepoint(pos)
on_ninetymin = ninetymin_button.collidepoint(pos)
on_custommin = custommin_button.collidepoint(pos)
#n_nonemin...
on_back = back_button.collidepoint(pos)
on_sleep = sleep_button.collidepoint(pos)
on_play = play_button.collidepoint(pos)
on_stop = stop_button.collidepoint(pos)
on_question = question_button.collidepoint(pos)
on_gear = gear_button.collidepoint(pos)
on_filter = filter_button.collidepoint(pos)
on_h2o2 = h2o2_button.collidepoint(pos)
on_volume = volume_button.collidepoint(pos)
on_length = length_button.collidepoint(pos)
#printer.p(OOO+"zerogAlive === about to go into the buttons...")
oldTarg0 = layer0
oldTarg1 = layer1
oldTarg2 = layer2
oldTarg3 = layer3
oldTarg4 = layer4
#================== BUTTON AND SCREEN BRANCHING FLOW CHART ==================
#
screens_BEGIN=mainscreen+2*floatscreen+4*maintenancescreen
if mainscreen:
layer0=nonemin
if floatpreset==60: layer0 = sixtymin
if floatpreset==90: layer0 = ninetymin
if floatpreset==-1: layer0 = custommin
if on_sixtymin : layer0 = sixtymin
if on_ninetymin : layer0 = ninetymin
if on_custommin : layer0 = custommin
if on_exit and go: alive = False
if on_exit and go: printer.p(OOO+"zerogAlive === ending...")
if not floatscreen and not maintenancescreen:
if on_sixtymin and go: floatpreset=60
if on_ninetymin and go: floatpreset=90
if on_custommin and go: floatpreset=-1
#if on_custommin and go: printer.fout('custom_duration',str(custom_duration))
if (on_sixtymin or on_ninetymin or on_custommin) and go:
floatscreen = True
if floatpreset==-1: min_float = math.floor(custom_duration)-2*min_fade
else: min_float = floatpreset-2*min_fade
#printer.fout('min_float',str(min_float))
printer.fout('floatpreset',str(floatpreset))
printer.fout('floatscreen',str(floatscreen))
if on_gear and go:
maintenancescreen=True
printer.fout('maintenancescreen',str(maintenancescreen))
if manualfilter: layer1=filter
if manualh2o2: layer2=h2o2
if floatscreen and not maintenancescreen:
if on_back and go:
floatscreen=False
printer.fout('floatscreen',str(floatscreen))
layer0=play
if not manualfilter and not manualh2o2:
if on_play and go: prog=0
if on_play and go: floatstart=time.time()
if on_play and go: floatInProgress=True
if on_play and go: printer.fout('floatstart',str(floatstart))
if on_play and go: printer.fout('floatInProgress',str(floatInProgress))
if on_play and go: playfloat=True
if on_play and go: printer.fout('playfloat',str(playfloat))
if on_stop and mouseL:
stopcount=True
countdown_num=3-(time.time()-countdownstart)
if countdown_num<0:
playfloat=False
printer.fout('playfloat',str(playfloat))
printer.fout('floatInProgress',str(floatInProgress))
countdown_num=0
stopcount=False
else:
stopcount=False
countdown_num=3
countdownstart=time.time()
else:
if on_play and go: overrideWarning=time.time()
#else: overrideWarning=False
if playfloat:
layer0=stop
prog=math.floor(floatelapsed/60/totalDuration*gradBarWidth)
if maintenancescreen:
layer0=settings
if on_back and go: printer.fout('custom_duration',str(custom_duration))
if on_back and go: printer.fout('max_vol',str(max_vol))
if on_back and go: layer0=layer1=layer2=layer3=layer4=0
if on_back and go:
maintenancescreen=False
printer.fout('maintenancescreen',str(maintenancescreen))
#if floatInProgress and phase==4
if on_sleep and go: sleepMode=not sleepMode
if not floatInProgress:
if on_filter and go: manualfilter = not manualfilter
if on_filter and go: printer.fout('manualfilter',str(manualfilter))
if on_filter and go and manualfilter: layer1 = filter
if on_filter and go and not manualfilter: layer1 = 0
if on_h2o2 and go: manualh2o2 = not manualh2o2
if on_h2o2 and go: printer.fout('manualh2o2',str(manualh2o2))
if on_h2o2 and go and manualh2o2: layer2 = h2o2
if on_h2o2 and go and not manualh2o2: layer2 = 0
if on_volume and mouseL:
max_vol=(pos[0]-10-volume_button.left) / volume_button.width
if max_vol<0: max_vol=0
if max_vol>1: max_vol=1
if on_length and mouseL:
stepper=(pos[0]-length_button.left) / length_button.width - .5
if stepper<0 and stepperSpeed==0: custom_duration-=1
if stepper>0 and stepperSpeed==0: custom_duration+=1
if stepper<0: custom_duration-=stepperSpeed*fm
if stepper>0: custom_duration+=stepperSpeed*fm
if stepperSpeed<.5: stepperSpeed+=.001*fm
elif stepperSpeed<2: stepperSpeed*=1.1
if custom_duration<2*min_fade: custom_duration=2*min_fade
if custom_duration>999.9: custom_duration=999
#if floatpreset!=60 and floatpreset!=90:
floatpreset=math.floor(custom_duration)
foutTheNewCustomDuration=True
elif foutTheNewCustomDuration:
printer.fout('custom_duration',str(custom_duration))
foutTheNewCustomDuration=False
else:
stepperSpeed=0
screens_END=mainscreen+2*floatscreen+4*maintenancescreen
if screens_BEGIN!=screens_END and floatscreen or reloaded: drawgradbar()
if reloaded: reloaded=False
if oldTarg0!=layer0: alpha0=minAlpha
if oldTarg1!=layer1: alpha1=minAlpha
if oldTarg2!=layer2: alpha2=minAlpha
if oldTarg3!=layer3: alpha3=minAlpha
if on_question and mouseL and not maintenancescreen and not floatscreen: phonealpha+=alphaStep*fm
elif phonealpha>0: phonealpha-=alphaStep*fm
if phonealpha<0: phonealpha=0
alpha0+=alphaStep*fm
alpha1+=alphaStep*fm
alpha2+=alphaStep*fm
gradalpha+=alphaStep*fm
if alpha0>255: alpha0=255
if alpha1>255: alpha1=255
if alpha2>255: alpha2=255
if gradalpha>255: gradalpha=255
if layer0: layer0.set_alpha(alpha0)
if layer1: layer1.set_alpha(alpha1)
if layer2: layer2.set_alpha(alpha2)
if layer0: stage.blit(layer0,(0,0))
if layer1: stage.blit(layer1,(153,42))
if layer2: stage.blit(layer2,(422,42))
if maintenancescreen:
for x in range(0,6):
a=0
if max_vol>x/6: a=255
elif max_vol>(x-.75)/6: a=64
elif max_vol>(x-.50)/6: a=128
elif max_vol>(x-.25)/6: a=192
volume.set_alpha(math.floor(a))
stage.blit(volume,(174+x*26,316))
floatlengthbar(str(math.floor(custom_duration)))
if not maintenancescreen:
tankname()
if floatscreen:
gradbar()
statusbar(status_str)
if playfloat:
#screen.blit(progbar,(gradBarLeft-gradBarWidth+prog,gradBarTop-vOffset))
progbar.set_alpha(alpha0*.7)
stage.blit(progbar,(gradBarLeft-gradBarWidth+prog,gradBarTop-vOffset))
#playfloat:
#if
#else:
#playBAK.blit(progbar,(gradBarLeft-gradBarWidth+prog,gradBarTop-vOffset))
x=gradBarLeft+prog
pygame.draw.line(screen, (0,255,0), (x,gradBarTop-vOffset),(x,gradBarTop+gradBarHeight-vOffset-1), 1)
screen.blit(stage,(0,0))
tfade=1
tlights=False
if floatInProgress:
tfade=0
tlights=True
phase=PHASE_SHOWER
status_str="SHOWER"
if floatelapsed/60>min_shower:
phase=PHASE_FADE1
status_str="FADE"
tfade=(floatelapsed/60-min_shower)/min_fade
if tfade>1: tfade=1
if floatelapsed/60>min_shower+min_fade:
tlights=False
phase=PHASE_FLOAT
status_str="FLOAT"
if floatelapsed/60>min_shower+min_fade+min_float:
tlights=True
phase=PHASE_FADE2
status_str="FADE"
tfade=1-(floatelapsed/60-(min_shower+min_fade+min_float))/min_fade
if tfade<0: tfade=0
if floatelapsed/60>min_shower+2*min_fade+min_float:
phase=PHASE_WAIT
status_str="SHOWER"
if floatelapsed/60>min_shower+2*min_fade+min_float+min_wait:
phase=PHASE_PLO
status_str="FILTER"
if floatelapsed/60>min_shower+2*min_fade+min_float+min_wait+min_plo:
phase=PHASE_PHI
if floatelapsed/60<min_shower+2*min_fade+min_float+min_wait+min_plo+min_uv: phase+=PHASE_UV
if floatelapsed/60<min_shower+2*min_fade+min_float+min_wait+min_plo+min_h2o2: phase+=PHASE_H2O2
if tfade>0:
blackout.set_alpha(tfade*192)
screen.blit(blackout,(0,0))
#if floatscreen and not maintenancescreen: screen.blit(blackout,(0,0))
if floatelapsed/60>totalDuration:
playfloat=False
floatInProgress=False
phase=PHASE_SHUTOFF
printer.fout('playfloat',str(playfloat))
printer.fout('floatInProgress',str(floatInProgress))
else:
tlights=True
phase=PHASE_NONE
status_str="READY"
tfade=fade
if tfade>0: tfade-=.01
if tfade<0: tfade=0
#set the actual fade just once! otherwise every so often the other thread will call on it before it is prepared ;)
if not playfloat: floatInProgress=False
if not floatInProgress: floatstart=time.time()
if phonealpha>0: myPhoneNumber()
if stopcount:
blackout.set_alpha(192)# -(255-alpha0)/255*fade)
countdown=tankname_font.render(str(math.floor(countdown_num+1)), 1, (164,154,144))
screen.blit(blackout,(0,0))
screen.blit(countdown, (400-countdown.get_rect().width/2,240-countdown.get_rect().height/2))
if overrideWarning!=False:
th=(time.time()-overrideWarning)/2*3.14
if th>2*3.14: overrideWarning=False
a=(.5-math.cos(th)/2)*192
print(str(th))
reasonSurface.set_alpha(a)
screen.blit(reasonSurface, (0,0))
#if lightMode:
# #tfade=0
#
#if alertMode:
# #tfade=.5+.5*math.sin((time.time()/3)*3.14)
# #amber.set_alpha(DIM*255)
# #screen.blit(amber,(0,0))
if sleepMode:
#tlights=False
if tfade<1: tfade+=.1
if tfade>1: tfade=1
blackout.set_alpha(128)
screen.blit(blackout,(0,0))
lightsOkay=tlights
fade=tfade
#floatelapsed=(time.time()-floatstart)*10+60*min_shower
#floatelapsed=(time.time()-floatstart)*1+60*(min_shower-20/60)
#floatelapsed=(time.time()-floatstart)*20+60*(min_shower+1*min_fade)
#floatelapsed=(time.time()-floatstart)*20+60*(min_shower+1*min_fade+min_float)
#floatelapsed=(time.time()-floatstart)*20+60*(min_shower+2*min_fade+min_float)
#floatelapsed=(time.time()-floatstart)*20+60*(min_shower+2*min_fade+min_float+min_wait-1)
#floatelapsed=(time.time()-floatstart)*20+60*(min_shower+2*min_fade+min_float+min_wait+min_plo)
#floatelapsed=(time.time()-floatstart)*40
#================ ================ ================ ================ ================
floatelapsed=(time.time()-floatstart) #this is the not-testing-for one
#================ ================ ================ ================ ================
#debug = default_font.render(debugstring,1,(190,190,178))
#screen.blit(debug, (565, 400))
#================ ACTUALLY DRAW TARGET ZONES FOR TESTING ======================
#
#sixtymin_buttonTARG = pygame.draw.rect(screen, (100,0,0),sixtymin_button, 2)
#ninetymin_buttonTARG = pygame.draw.rect(screen, (0,100,0),ninetymin_button, 2)
#custommin_buttonTARG = pygame.draw.rect(screen, (0,0,100),custommin_button, 2)
#back_buttonTARG = pygame.draw.rect(screen, (0,0,100),back_button, 2)
#sleep_buttonTARG = pygame.draw.rect(screen, (0,0,100),sleep_button, 2)
#play_buttonTARG = pygame.draw.rect(screen, (0,100,0),play_button, 2)
#stop_buttonTARG = pygame.draw.rect(screen, (100,0,0),stop_button, 2)
#question_buttonTARG = pygame.draw.rect(screen, (0,100,0),question_button, 2)
#gear_buttonTARG = pygame.draw.rect(screen, (100,0,0),gear_button, 2)
#filter_buttonTARG = pygame.draw.rect(screen, (0,100,0),filter_button, 2)
#h2o2_buttonTARG = pygame.draw.rect(screen, (0,0,100),h2o2_button, 2)
#volume_buttonTARG = pygame.draw.rect(screen, (0,0,100),volume_button, 2)
#length_buttonTARG = pygame.draw.rect(screen, (0,100,0),length_button, 2)
#exit_buttonTARG = pygame.draw.rect(screen, (0, 0, 0),exit_button, 2)
#
pygame.display.update()
#=============================================================================================================================================================#
printer.goodbye(myname,version)
def actionThread():
OOO=" "
printer.p(OOO+"actionThread === checking in...")
global session
global fthermo
global jack_unplugged,jack_plugged_in,jack_in_use
global unfaded,faded_out
global lastPrint,pdelay
global lightMode,alertMode
global extraWhite
try:
amp = MAX9744() #amp = MAX9744(busnum=2, address=0x4C)
amp.set_volume(0)
noAmp=False
except Exception:
noAmp=True
pass
thermo="I can't feel the water"
alert="No alert, probably"
status = "Just getting warmed up..."
DIM=0
VOL=0
h12hot=time.time()
h12cool=time.time()
printer.p(OOO+"actionThread === entering circuit...")
while zerog.alive:
try:
filtermode=zerog.manualfilter
h2o2mode=zerog.manualh2o2
session=zerog.floatInProgress
custom_session_duration=math.floor(zerog.custom_duration)
zerog.cur_temp=thermoString
if session:
if zerog.phase==zerog.PHASE_SHUTOFF:
statusstring="Ready to float :)"
GPIO.output(p_plo, OFF)
GPIO.output(p_phi, OFF)
GPIO.output(p_h2o2, OFF)
GPIO.output(p_uv, OFF)
zerog.phase=zerog.PHASE_NONE
bit1=zerog.phase%10
bit2=(zerog.phase-bit1)%100
bit3=zerog.phase-bit1-bit2
if bit1==zerog.PHASE_PHI:
GPIO.output(p_plo, OFF)
GPIO.output(p_phi, ON)
if bit2==zerog.PHASE_UV: GPIO.output(p_uv, ON)
else: GPIO.output(p_uv, OFF)
if bit3==zerog.PHASE_H2O2: GPIO.output(p_h2o2, ON)
else: GPIO.output(p_h2o2, OFF)
if zerog.phase==zerog.PHASE_PLO: GPIO.output(p_plo, ON)
elif filtermode or h2o2mode:
if filtermode:
GPIO.output(p_plo, OFF)
GPIO.output(p_phi, ON)
GPIO.output(p_uv, ON)
else:
GPIO.output(p_phi, OFF)
GPIO.output(p_uv, OFF)
if h2o2mode:
GPIO.output(p_h2o2, ON)
else:
GPIO.output(p_h2o2, OFF)
else:
GPIO.output(p_plo, OFF)
GPIO.output(p_phi, OFF)
GPIO.output(p_h2o2, OFF)
GPIO.output(p_uv, OFF)
statusstring="Ready to float :)"
oldVOL=VOL
VOL=(1-zerog.fade)*zerog.max_vol
if oldVOL != VOL:
if not noAmp:
ampvol=math.floor(VOL*63)
if ampvol<0: ampvol=0
if ampvol>63: ampvol=63
amp.set_volume(ampvol)
thermotarg=93.5
calThermo=thermo_calibrate(fthermo)
topHeatOn=3*60
topHeatOff=5*60
if printer.myID=='Harmony-DEVI':
topHeatOn=60
topHeatOff=5*60
if printer.myID=='Portland-DEVI1':
topHeatOn=15
topHeatOff=4*60
if calThermo<thermotarg and GPIO.input(p_heater1) and time.time()-h12cool>topHeatOn:
GPIO.output(p_heater1,ON)
GPIO.output(p_heater2,ON)
h12hot=time.time()
if (calThermo>thermotarg or time.time()-h12hot>topHeatOff) and not GPIO.input(p_heater1):
GPIO.output(p_heater1,OFF)
GPIO.output(p_heater2,OFF)
h12cool=time.time()
if calThermo<thermotarg and GPIO.input(p_heater3):
GPIO.output(p_heater3,ON)
GPIO.output(p_heater4,ON)
if calThermo>thermotarg+.5 and not GPIO.input(p_heater3):
GPIO.output(p_heater3,OFF)
GPIO.output(p_heater4,OFF)
if GPIO.input(p_user): #and time.time()-userElapse>.5:
#print("USER LIGHT TRUE");
zerog.lightMode=True
lightMode=True
if not GPIO.input(p_user):
#userElapse=time.time()
#print("USER LIGHT FALSE");
zerog.lightMode=False
lightMode=False
if zerog.fade==1 and unfaded: unfaded=False
if zerog.fade!=1 and faded_out: faded_out=False
if printer.myID!='Portland-DEVI1':
if GPIO.input(p_alert):
#alert.set("Emergency Light On")
zerog.alertMode=True
alertMode=True
if not GPIO.input(p_alert):
alertElapse=time.time()
#alert.set("Emergency Light Off")
zerog.alertMode=False
alertMode=False
else:
zerog.alertMode=False
alertMode=False
if not GPIO.input(p_audio) and not jack_in_use:
jack_plugged_in=True
jack_in_use=True
elif GPIO.input(p_audio) and jack_in_use:
jack_unplugged=True
jack_in_use=False
if nojack:
jack_in_use=False
jack_plugged_in=False
#zerog.debugstring=statusstring
if time.time()-lastPrint>pdelay: #and zerog.phase>0:
#pdelay+=.1
lastPrint=time.time()
#printer.p("phase: "+str(zerog.phase))
pre=OOO+"actionThread === "
br="<br>"+pre
statusstring=pre+"=========================="
statusstring+=br+"session : "+str(session)
statusstring+=br+"min_float : "+str(zerog.min_float+2*zerog.min_fade)
statusstring+=br+"temperature : "+thermoString
statusstring+=br+"raw temp : "+str(fthermo)
statusstring+=br+"times : "+zerog.timeleft_str
statusstring+=br+"phase : "+zerog.dephaser()
statusstring+="<br>"
statusstring+=br+"fade : "+str(math.floor(zerog.fade*100))+"%"
statusstring+=br+"lightsOkay : "+str(zerog.lightsOkay)
statusstring+=br+"extraWhite : "+str(extraWhite)
statusstring+="<br>"
statusstring+=br+"jack_in_use : "+str(jack_in_use)
statusstring+=br+"p_user|alert : "+bool_to_on_off(GPIO.input(p_user))+"|"+bool_to_on_off(GPIO.input(p_alert))
statusstring+=br+"p_heater1234 : "+heaterString()
statusstring+="<br>"
statusstring+=br+"man_filter : "+str(filtermode)
statusstring+=br+"man_h2o2 : "+str(h2o2mode)
statusstring+=br+"max_vol : "+str(math.floor(zerog.max_vol*100))+"%"
statusstring+=br+"cust_dur : "+str(custom_session_duration)
statusstring+="<br>"
statusstring+=br+"pdelay : "+str(math.floor(pdelay*10))+"ds"
printer.p(statusstring)
except:
zerog.alive=False
#cleanup on exit
GPIO.output(p_plo, False)
GPIO.output(p_phi, False)
GPIO.output(p_h2o2, False)
GPIO.output(p_uv, False)
GPIO.output(p_heater1, False)
GPIO.output(p_heater2, False)
GPIO.output(p_heater3, False)
GPIO.output(p_heater4, False)
GPIO.cleanup()
pygame.mixer.music.stop()
try:
global client
amp.set_volume(0)
color = [ (0,0,0) ] * numLEDs
client.put_pixels(color)
except Exception:
pass
os.system('modprobe w1-gpio')
os.system('modprobe w1-therm')
#tester:
try:
fns = [fn for fn in os.listdir("/sys/bus/w1/devices/")]
if str(fns[0][:2])=="28": thermoID=str(fns[0])
else: thermoID=str(fns[1])
thermo_sensor = '/sys/bus/w1/devices/'+thermoID+'/w1_slave'
except:
thermo_sensor = ''
pass
printer.p("!!!!!!!!!"+thermo_sensor)
#if printer.myID=='Harmony-DEVI': thermo_sensor = '/sys/bus/w1/devices/28-00152c2849ee/w1_slave'
#if printer.myID=='Portland-DEVI1': thermo_sensor = '/sys/bus/w1/devices/?-?/w1_slave'
#portland??
thermoString="I can't feel the water"
fthermo=0
session_60=True
session_90=False
session_custom=False
filtermode=False
h2o2mode=False
def quit(data):
"""Quit the game."""
data["want_to_play"] = False
printer.p("{.BLUE}[Goodbye!]{.ENDC}".format(
printer.PColors, printer.PColors), "Saving game! See you later!")
prep_data_on_close(data)
#=============================================================================================================================================================#
myname = "loader.py"
version = "v3.11"
#=============================================================================================================================================================#
from subprocess import call
try:
import sys
sys.path.insert(0, '/home/pi/Desktop/')
import printer
printer.hello(myname, version)
while True:
printer.p(
" Loader === Hi. I'm beginning a new cycle"
)
call(['python3', '/home/pi/Desktop/update.py'])
except:
while True:
call(['python3', '/home/pi/Desktop/update.py'])
pass
def callThread():
OOO = " "
printer.fileUpdate(ip, "cooperate.py", "cooperate.py")
printer.p(OOO + "callThread === about to call cooperate...")
call(['python3', '/home/pi/Desktop/cooperate.py'])
printer.p(OOO + "callThread === ...checking out")
#
# "guiassets/main/60min.png",
# "guiassets/main/90min.png",
# "guiassets/main/custommin.png",
# "guiassets/main/nonemin.png"]
#
# "splash.png", #?
# "asplashscreen",
#
"zerog.py"
]
#=============================================================================================================================================================#
msg = " myID---from---" + myID + " || I || " + IDcheck + "---to---IDcheck"
printer.p(msg)
#----------------------------------------------------------------------I--------------------------------------------------------------------------------------#
import threading
import requests
import pyautogui
import time
from PIL import Image, ImageFile
#from subprocess import call
from threading import Thread
pyautogui.FAILSAFE = False
ImageFile.MAXBLOCK = 2**20
alive = True
#=============================================================================================================================================================#
myname="loader.py"
version="v3.11"
#=============================================================================================================================================================#
from subprocess import call
try:
import sys
sys.path.insert(0, '/home/pi/Desktop/')
import printer
printer.hello(myname,version)
while True:
printer.p(" Loader === Hi. I'm beginning a new cycle")
call(['python3','/home/pi/Desktop/update.py'])
except:
while True:
call(['python3','/home/pi/Desktop/update.py'])
pass
def callThread():
OOO=" "
printer.fileUpdate(ip,"cooperate.py","cooperate.py")
printer.p(OOO+"callThread === about to call cooperate...")
call(['python3','/home/pi/Desktop/cooperate.py'])
printer.p(OOO+"callThread === ...checking out")
