def open_project(self):
"""This project call Open Project Info class."""
print("Function : Open Project")
self.project = OpenProjectInfo()
try:
directory, filelist = self.project.body()
self.obj_Mainview.obj_projectExplorer.addTreeNode(
directory, filelist)
except BaseException:
pass
def open_project(self):
"""
This project call Open Project Info class
"""
print "Open Project called"
self.project = OpenProjectInfo()
try:
directory, filelist = self.project.body()
self.obj_Mainview.obj_projectExplorer.addTreeNode(
directory, filelist)
except:
pass
def new_project(self):
"""This function call New Project Info class."""
text, ok = QtWidgets.QInputDialog.getText(
self, 'New Project Info', 'Enter Project Name:'
)
updated = False
if ok:
self.projname = (str(text))
self.project = NewProjectInfo()
directory, filelist = self.project.createProject(self.projname)
if directory and filelist:
self.obj_Mainview.obj_projectExplorer.addTreeNode(
directory, filelist
)
updated = True
if not updated:
print("No new project created")
self.obj_appconfig.print_info('No new project created')
try:
self.obj_appconfig.print_info(
'Current project is : ' +
self.obj_appconfig.current_project["ProjectName"]
)
except BaseException:
pass
def open_project(self):
"""
This function call Open Project Info class
"""
print "Function : Open Project"
self.project = OpenProjectInfo()
try:
directory, filelist = self.project.body()
self.obj_Mainview.obj_projectExplorer.addTreeNode(directory, filelist)
except:
pass
def new_project(self):
"""
This function call New Project Info class.
"""
text, ok = QtGui.QInputDialog.getText(self, 'New Project Info','Enter Project Name:')
if ok:
self.projname = (str(text))
self.project = NewProjectInfo()
directory, filelist =self.project.createProject(self.projname)
self.obj_Mainview.obj_projectExplorer.addTreeNode(directory, filelist)
else:
print "No new project created"
self.obj_appconfig.print_info('No new project created')
try:
self.obj_appconfig.print_info('Current project is : ' + self.obj_appconfig.current_project["ProjectName"])
except:
pass
def new_project(self):
"""
This function call New Project Info class.
"""
text, ok = QtGui.QInputDialog.getText(self, 'New Project Info','Enter Project Name:')
if ok:
self.projname = (str(text))
self.project = NewProjectInfo()
directory, filelist =self.project.createProject(self.projname)
self.obj_Mainview.obj_projectExplorer.addTreeNode(directory, filelist)
else:
print "No new project created"
self.obj_appconfig.print_info('No new project created')
try:
self.obj_appconfig.print_info('Current project is : ' + self.obj_appconfig.current_project["ProjectName"])
except:
pass
class Application(QtGui.QMainWindow):
global project_name
"""
Its our main window of application
"""
def __init__(self,*args):
"""
Initialize main Application window
"""
#Calling __init__ of super class
QtGui.QMainWindow.__init__(self,*args)
#Flag for online-offline mode. Default is set offline mode.
#Mode gets updated dynamically from the previous eSim session.
self.online_flag = False
#Creating require Object
self.obj_workspace = Workspace.Workspace()
self.obj_Mainview = MainView()
self.obj_kicad = Kicad(self.obj_Mainview.obj_dockarea)
self.obj_appconfig = Appconfig()
self.obj_validation = Validation()
#Initialize all widget
self.setCentralWidget(self.obj_Mainview)
self.initToolBar()
self.setGeometry(self.obj_appconfig._app_xpos,
self.obj_appconfig._app_ypos,
self.obj_appconfig._app_width,
self.obj_appconfig._app_heigth)
self.setWindowTitle(self.obj_appconfig._APPLICATION)
self.showMaximized()
self.setWindowIcon(QtGui.QIcon('../../images/logo.png'))
#self.show()
self.systemTrayIcon = QtGui.QSystemTrayIcon(self)
self.systemTrayIcon.setIcon(QtGui.QIcon('../../images/logo.png'))
self.systemTrayIcon.setVisible(True)
def initToolBar(self):
"""
This function initialize Tool Bar
"""
#Top Tool bar
self.newproj = QtGui.QAction(QtGui.QIcon('../../images/newProject.png'),'<b>New Project</b>',self)
self.newproj.setShortcut('Ctrl+N')
self.newproj.triggered.connect(self.new_project)
#self.newproj.connect(self.newproj,QtCore.SIGNAL('triggered()'),self,QtCore.SLOT(self.new_project()))
self.openproj = QtGui.QAction(QtGui.QIcon('../../images/openProject.png'),'<b>Open Project</b>',self)
self.openproj.setShortcut('Ctrl+O')
self.openproj.triggered.connect(self.open_project)
self.closeproj = QtGui.QAction(QtGui.QIcon('../../images/closeProject.png'),'<b>Close Project</b>',self)
self.closeproj.setShortcut('Ctrl+X')
self.closeproj.triggered.connect(self.close_project)
for file in os.listdir(os.getenv('HOME') + "/.config/kicad"):
if file.startswith("fp-lib-table"):
if file.endswith("offline"):
self.webConnect = QtGui.QAction(QtGui.QIcon('../../images/online.png'),'<b>Go Offline</b>',self)
self.online_flag = True
break
elif file.endswith("online"):
self.webConnect = QtGui.QAction(QtGui.QIcon('../../images/offline.png'),'<b>Go Online</b>',self)
self.online_flag = False
break
self.webConnect.setShortcut('Ctrl+G')
self.webConnect.triggered.connect(self.go_online_offline)
self.helpfile = QtGui.QAction(QtGui.QIcon('../../images/helpProject.png'),'<b>Help</b>',self)
self.helpfile.setShortcut('Ctrl+H')
self.helpfile.triggered.connect(self.help_project)
self.topToolbar = self.addToolBar('Top Tool Bar')
self.topToolbar.addAction(self.newproj)
self.topToolbar.addAction(self.openproj)
self.topToolbar.addAction(self.closeproj)
self.topToolbar.addAction(self.webConnect)
self.topToolbar.addAction(self.helpfile)
self.spacer = QtGui.QWidget()
self.spacer.setSizePolicy(QtGui.QSizePolicy.Expanding,QtGui.QSizePolicy.Expanding)
self.topToolbar.addWidget(self.spacer)
self.logo = QtGui.QLabel()
self.logopic = QtGui.QPixmap(os.path.join(os.path.abspath('../..'),'images','fosseeLogo.png'))
self.logopic = self.logopic.scaled(QSize(150,150),QtCore.Qt.KeepAspectRatio)
self.logo.setPixmap(self.logopic)
self.logo.setStyleSheet("padding:0 15px 0 0;")
self.topToolbar.addWidget(self.logo)
#Left Tool bar Action Widget
self.kicad = QtGui.QAction(QtGui.QIcon('../../images/kicad.png'),'<b>Open Schematic</b>',self)
self.kicad.triggered.connect(self.obj_kicad.openSchematic)
self.conversion = QtGui.QAction(QtGui.QIcon('../../images/ki-ng.png'),'<b>Convert Kicad to Ngspice</b>',self)
self.conversion.triggered.connect(self.obj_kicad.openKicadToNgspice)
self.ngspice = QtGui.QAction(QtGui.QIcon('../../images/ngspice.png'), '<b>Simulation</b>', self)
self.ngspice.triggered.connect(self.open_ngspice)
self.model = QtGui.QAction(QtGui.QIcon('../../images/model.png'),'<b>Model Editor</b>',self)
self.model.triggered.connect(self.open_modelEditor)
self.subcircuit=QtGui.QAction(QtGui.QIcon('../../images/subckt.png'),'<b>Subcircuit</b>',self)
self.subcircuit.triggered.connect(self.open_subcircuit)
self.nghdl = QtGui.QAction(QtGui.QIcon('../../images/nghdl.png'), '<b>Nghdl</b>', self)
self.nghdl.triggered.connect(self.open_nghdl)
self.omedit = QtGui.QAction(QtGui.QIcon('../../images/omedit.png'),'<b>Modelica Converter</b>',self)
self.omedit.triggered.connect(self.open_OMedit)
self.omoptim=QtGui.QAction(QtGui.QIcon('../../images/omoptim.png'),'<b>OM Optimisation</b>',self)
self.omoptim.triggered.connect(self.open_OMoptim)
#Adding Action Widget to tool bar
self.lefttoolbar = QtGui.QToolBar('Left ToolBar')
self.addToolBar(QtCore.Qt.LeftToolBarArea, self.lefttoolbar)
self.lefttoolbar.addAction(self.kicad)
self.lefttoolbar.addAction(self.conversion)
self.lefttoolbar.addAction(self.ngspice)
self.lefttoolbar.addAction(self.model)
self.lefttoolbar.addAction(self.subcircuit)
self.lefttoolbar.addAction(self.nghdl)
self.lefttoolbar.addAction(self.omedit)
self.lefttoolbar.addAction(self.omoptim)
self.lefttoolbar.setOrientation(QtCore.Qt.Vertical)
self.lefttoolbar.setIconSize(QSize(40,40))
def closeEvent(self, event):
exit_msg = "Are you sure you want to exit the program ? All unsaved data will be lost."
reply = QtGui.QMessageBox.question(self, 'Message',
exit_msg, QtGui.QMessageBox.Yes, QtGui.QMessageBox.No)
if reply == QtGui.QMessageBox.Yes:
for proc in self.obj_appconfig.procThread_list:
try:
proc.terminate()
except:
pass
try:
for process_object in self.obj_appconfig.process_obj:
try:
process_object.close()
except:
pass
except:
pass
##Just checking if open project and New project window is open. If yes just close it when application is closed
try:
self.project.close()
except:
pass
event.accept()
self.systemTrayIcon.showMessage('Exit', 'eSim is Closed.')
elif reply == QtGui.QMessageBox.No:
event.ignore()
def close_project(self):
print "Function : Close Project"
current_project = self.obj_appconfig.current_project['ProjectName']
if current_project==None:
pass
else:
for pid in self.obj_appconfig.proc_dict[self.obj_appconfig.current_project['ProjectName']]:
try:
os.kill(pid, 9)
except:
pass
self.obj_Mainview.obj_dockarea.closeDock()
self.obj_appconfig.current_project['ProjectName'] = None
self.systemTrayIcon.showMessage('Close', 'Current project '+os.path.basename(current_project)+' is Closed.')
def new_project(self):
"""
This function call New Project Info class.
"""
text, ok = QtGui.QInputDialog.getText(self, 'New Project Info','Enter Project Name:')
if ok:
self.projname = (str(text))
self.project = NewProjectInfo()
directory, filelist =self.project.createProject(self.projname)
self.obj_Mainview.obj_projectExplorer.addTreeNode(directory, filelist)
else:
print "No new project created"
self.obj_appconfig.print_info('No new project created')
try:
self.obj_appconfig.print_info('Current project is : ' + self.obj_appconfig.current_project["ProjectName"])
except:
pass
def open_project(self):
"""
This project call Open Project Info class
"""
print "Function : Open Project"
self.project = OpenProjectInfo()
try:
directory, filelist = self.project.body()
self.obj_Mainview.obj_projectExplorer.addTreeNode(directory, filelist)
except:
pass
def help_project(self):
print "Function : Help"
self.obj_appconfig.print_info('Help is called')
print "Current Project is : ",self.obj_appconfig.current_project
self.obj_Mainview.obj_dockarea.usermanual()
def go_online_offline(self):
if not self.obj_kicad.check_open_schematic():
if self.online_flag:
os.rename(os.getenv('HOME') + "/.config/kicad/fp-lib-table", os.getenv('HOME') + "/.config/kicad/fp-lib-table-online")
os.rename(os.getenv('HOME') + "/.config/kicad/fp-lib-table-offline", os.getenv('HOME') + "/.config/kicad/fp-lib-table")
self.webConnect.setIcon(QtGui.QIcon('../../images/offline.png'))
self.webConnect.setText('<b>Go Online</b>')
self.online_flag = False
else:
os.rename(os.getenv('HOME') + "/.config/kicad/fp-lib-table", os.getenv('HOME') + "/.config/kicad/fp-lib-table-offline")
os.rename(os.getenv('HOME') + "/.config/kicad/fp-lib-table-online", os.getenv('HOME') + "/.config/kicad/fp-lib-table")
self.webConnect.setIcon(QtGui.QIcon('../../images/online.png'))
self.webConnect.setText('<b>Go Offline</b>')
self.online_flag = True
else:
self.msg = QtGui.QErrorMessage()
self.msg.showMessage('Please save and close all the Kicad Windows first, and then change the online-offline mode')
self.msg.setWindowTitle("Error Message")
def open_ngspice(self):
"""
This Function execute ngspice on current project
"""
self.projDir = self.obj_appconfig.current_project["ProjectName"]
if self.projDir != None:
self.obj_Mainview.obj_dockarea.ngspiceEditor(self.projDir)
time.sleep(2) #Need permanent solution
#Calling Python Plotting
try:
self.obj_Mainview.obj_dockarea.plottingEditor()
except Exception as e:
self.msg = QtGui.QErrorMessage(None)
self.msg.showMessage('Error while opening python plotting Editor. Please look at console for more details ')
print "Exception Message:",str(e)
self.obj_appconfig.print_error('Exception Message : ' + str(e))
self.msg.setWindowTitle("Error Message")
else:
self.msg = QtGui.QErrorMessage()
self.msg.showMessage('Please select the project first. You can either create new project or open existing project')
self.msg.setWindowTitle("Error Message")
def open_subcircuit(self):
print "Function : Subcircuit editor"
self.obj_appconfig.print_info('Subcircuit editor is called')
self.obj_Mainview.obj_dockarea.subcircuiteditor()
def open_nghdl(self):
print "Function : Nghdl"
self.obj_appconfig.print_info('Nghdl is called')
if self.obj_validation.validateTool('nghdl'):
self.cmd = 'nghdl -e'
self.obj_workThread = Worker.WorkerThread(self.cmd)
self.obj_workThread.start()
else:
self.msg = QtGui.QErrorMessage(None)
self.msg.showMessage('Error while opening nghdl. Please make sure nghdl is installed')
self.obj_appconfig.print_error('Error while opening nghdl. Please make sure nghdl is installed')
self.msg.setWindowTitle('nghdl Error Message')
def open_modelEditor(self):
print "Function : Model editor"
self.obj_appconfig.print_info('Model editor is called')
self.obj_Mainview.obj_dockarea.modelEditor()
def open_OMedit(self):
"""
This function call ngspice to OM edit converter and then launch OM edit.
"""
self.obj_appconfig.print_info('OM edit is called')
self.projDir = self.obj_appconfig.current_project["ProjectName"]
if self.projDir != None:
if self.obj_validation.validateCirOut(self.projDir):
self.projName = os.path.basename(self.projDir)
self.ngspiceNetlist = os.path.join(self.projDir,self.projName+".cir.out")
self.modelicaNetlist = os.path.join(self.projDir,self.projName+".mo")
"""
try:
#Creating a command for Ngspice to Modelica converter
self.cmd1 = "python ../ngspicetoModelica/NgspicetoModelica.py "+self.ngspiceNetlist
self.obj_workThread1 = Worker.WorkerThread(self.cmd1)
self.obj_workThread1.start()
if self.obj_validation.validateTool("OMEdit"):
#Creating command to run OMEdit
self.cmd2 = "OMEdit "+self.modelicaNetlist
self.obj_workThread2 = Worker.WorkerThread(self.cmd2)
self.obj_workThread2.start()
else:
self.msg = QtGui.QMessageBox()
self.msgContent = "There was an error while opening OMEdit.<br/>\
Please make sure OpenModelica is installed in your system. <br/>\
To install it on Linux : Go to <a href=https://www.openmodelica.org/download/download-linux>OpenModelica Linux</a> and install nigthly build release.<br/>\
To install it on Windows : Go to <a href=https://www.openmodelica.org/download/download-windows>OpenModelica Windows</a> and install latest version.<br/>"
self.msg.setTextFormat(QtCore.Qt.RichText)
self.msg.setText(self.msgContent)
self.msg.setWindowTitle("Missing OpenModelica")
self.obj_appconfig.print_info(self.msgContent)
self.msg.exec_()
except Exception as e:
self.msg = QtGui.QErrorMessage()
self.msg.showMessage('Unable to convert NgSpice netlist to Modelica netlist :'+str(e))
self.msg.setWindowTitle("Ngspice to Modelica conversion error")
self.obj_appconfig.print_error(str(e))
"""
self.obj_Mainview.obj_dockarea.modelicaEditor(self.projDir)
else:
self.msg = QtGui.QErrorMessage()
self.msg.showMessage('Current project does not contain any ngspice file. Please create ngspice file with extension .cir.out')
self.msg.setWindowTitle("Missing Ngspice netlist")
else:
self.msg = QtGui.QErrorMessage()
self.msg.showMessage('Please select the project first. You can either create new project or open existing project')
self.msg.setWindowTitle("Error Message")
def open_OMoptim(self):
print "Function : OM Optim"
self.obj_appconfig.print_info('OM Optim is called')
#Check if OMOptim is installed
if self.obj_validation.validateTool("OMOptim"):
#Creating a command to run
self.cmd = "OMOptim"
self.obj_workThread = Worker.WorkerThread(self.cmd)
self.obj_workThread.start()
else:
self.msg = QtGui.QMessageBox()
self.msgContent = "There was an error while opening OMOptim.<br/>\
Please make sure OpenModelica is installed in your system. <br/>\
To install it on Linux : Go to <a href=https://www.openmodelica.org/download/download-linux>OpenModelica Linux</a> and install nigthly build release.<br/>\
To install it on Windows : Go to <a href=https://www.openmodelica.org/download/download-windows>OpenModelica Windows</a> and install latest version.<br/>"
self.msg.setTextFormat(QtCore.Qt.RichText)
self.msg.setText(self.msgContent)
self.msg.setWindowTitle("Error Message")
self.obj_appconfig.print_info(self.msgContent)
self.msg.exec_()
def open_project(self):
print "Open Project called"
self.project = OpenProjectInfo()
self.project.body()
def new_project(self):
print "New Project called"
self.project = NewProjectInfo()
self.project.body()
class Application(QtGui.QMainWindow):
"""
Its our main window of application
"""
def __init__(self,*args):
"""
Initialize main Application window
"""
#Calling __init__ of super class
QtGui.QMainWindow.__init__(self,*args)
#Creating Application configuration object
self.obj_appconfig = Appconfig()
self.setGeometry(self.obj_appconfig._app_xpos,
self.obj_appconfig._app_ypos,
self.obj_appconfig._app_width,
self.obj_appconfig._app_heigth)
self.setWindowTitle(self.obj_appconfig._APPLICATION)
#Init Workspace
self.obj_workspace = Workspace.Workspace()
#Init necessary components in sequence
self.initActions()
self.initView()
def initActions(self):
self.newproj = QtGui.QAction(QtGui.QIcon('../images/newProject.svg'),'<b>New Project</b>',self)
self.newproj.setShortcut('Ctrl+N')
self.newproj.triggered.connect(self.new_project)
self.openproj = QtGui.QAction(QtGui.QIcon('../images/openProject.svg'),'<b>Open Project</b>',self)
self.openproj.setShortcut('Ctrl+O')
self.openproj.triggered.connect(self.open_project)
self.exitproj = QtGui.QAction(QtGui.QIcon('../images/closeProject.svg'),'<b>Exit</b>',self)
self.exitproj.setShortcut('Ctrl+X')
self.exitproj.triggered.connect(self.exit_project)
self.helpfile = QtGui.QAction(QtGui.QIcon('../images/default.png'),'<b>Help</b>',self)
self.helpfile.setShortcut('Ctrl+H')
self.helpfile.triggered.connect(self.help_project)
self.mainToolbar = self.addToolBar('Top Navigation')
self.mainToolbar.addAction(self.newproj)
self.mainToolbar.addAction(self.openproj)
self.mainToolbar.addAction(self.exitproj)
self.mainToolbar.addAction(self.helpfile)
def initView(self):
"""
Create gui from the class Views and initialize it
"""
self.view = ViewManagement.ViewManagement()
self.setCentralWidget(self.view)
def new_project(self):
print "New Project called"
self.project = NewProjectInfo()
self.project.body()
def open_project(self):
print "Open Project called"
self.project = OpenProjectInfo()
self.project.body()
def exit_project(self):
print "Exit Project called"
self.close()
def help_project(self):
print "Help is called"
print "Current Project : ",self.obj_appconfig.current_project
def testing(self):
print "Sucess hit kicad button"
class Application(QtGui.QMainWindow):
global project_name
"""
Its our main window of application
"""
def __init__(self,*args):
"""
Initialize main Application window
"""
#Calling __init__ of super class
QtGui.QMainWindow.__init__(self,*args)
#Creating require Object
self.obj_workspace = Workspace.Workspace()
self.obj_Mainview = MainView()
self.obj_kicad = Kicad(self.obj_Mainview.obj_dockarea)
self.obj_appconfig = Appconfig()
self.obj_validation = Validation()
#Initialize all widget
self.setCentralWidget(self.obj_Mainview)
self.initToolBar()
self.setGeometry(self.obj_appconfig._app_xpos,
self.obj_appconfig._app_ypos,
self.obj_appconfig._app_width,
self.obj_appconfig._app_heigth)
self.setWindowTitle(self.obj_appconfig._APPLICATION)
self.showMaximized()
self.setWindowIcon(QtGui.QIcon('res/images/logo.png'))
#self.show()
self.systemTrayIcon = QtGui.QSystemTrayIcon(self)
self.systemTrayIcon.setIcon(QtGui.QIcon('res/images/logo.png'))
self.systemTrayIcon.setVisible(True)
def initToolBar(self):
"""
This function initialize Tool Bar
"""
#Top Tool bar
self.newproj = QtGui.QAction(QtGui.QIcon('res/images/newProject.png'),'<b>New Project</b>',self)
self.newproj.setShortcut('Ctrl+N')
self.newproj.triggered.connect(self.new_project)
#self.newproj.connect(self.newproj,QtCore.SIGNAL('triggered()'),self,QtCore.SLOT(self.new_project()))
self.openproj = QtGui.QAction(QtGui.QIcon('res/images/openProject.png'),'<b>Open Project</b>',self)
self.openproj.setShortcut('Ctrl+O')
self.openproj.triggered.connect(self.open_project)
self.closeproj = QtGui.QAction(QtGui.QIcon('res/images/closeProject.png'),'<b>Close Project</b>',self)
self.closeproj.setShortcut('Ctrl+X')
self.closeproj.triggered.connect(self.close_project)
self.wrkspc = QtGui.QAction(QtGui.QIcon('res/images/workspace.ico'),'<b>Change Workspace</b>',self)
self.wrkspc.setShortcut('Ctrl+W')
self.wrkspc.triggered.connect(self.wrkspc_change)
self.helpfile = QtGui.QAction(QtGui.QIcon('res/images/helpProject.png'),'<b>Help</b>',self)
self.helpfile.setShortcut('Ctrl+H')
self.helpfile.triggered.connect(self.help_project)
self.topToolbar = self.addToolBar('Top Tool Bar')
self.topToolbar.addAction(self.newproj)
self.topToolbar.addAction(self.openproj)
self.topToolbar.addAction(self.closeproj)
self.topToolbar.addAction(self.wrkspc)
self.topToolbar.addAction(self.helpfile)
self.spacer = QtGui.QWidget()
self.spacer.setSizePolicy(QtGui.QSizePolicy.Expanding,QtGui.QSizePolicy.Expanding)
self.topToolbar.addWidget(self.spacer)
self.logo = QtGui.QLabel()
self.logopic = QtGui.QPixmap(os.path.join('res/images','fosseeLogo.png'))
self.logopic = self.logopic.scaled(QSize(150,150),QtCore.Qt.KeepAspectRatio)
self.logo.setPixmap(self.logopic)
self.logo.setStyleSheet("padding:0 15px 0 0;")
self.topToolbar.addWidget(self.logo)
#Left Tool bar Action Widget
self.kicad = QtGui.QAction(QtGui.QIcon('res/images/kicad.png'),'<b>Open Schematic</b>',self)
self.kicad.triggered.connect(self.obj_kicad.openSchematic)
self.conversion = QtGui.QAction(QtGui.QIcon('res/images/ki-ng.png'),'<b>Convert Kicad to Ngspice</b>',self)
self.conversion.triggered.connect(self.obj_kicad.openKicadToNgspice)
self.ngspice = QtGui.QAction(QtGui.QIcon('res/images/ngspice.png'), '<b>Simulation</b>', self)
self.ngspice.triggered.connect(self.open_ngspice)
self.model = QtGui.QAction(QtGui.QIcon('res/images/model.png'),'<b>Model Editor</b>',self)
self.model.triggered.connect(self.open_modelEditor)
self.subcircuit=QtGui.QAction(QtGui.QIcon('res/images/subckt.png'),'<b>Subcircuit</b>',self)
self.subcircuit.triggered.connect(self.open_subcircuit)
self.nghdl = QtGui.QAction(QtGui.QIcon('res/images/nghdl.png'), '<b>Nghdl</b>', self)
self.nghdl.triggered.connect(self.open_nghdl)
self.omedit = QtGui.QAction(QtGui.QIcon('res/images/omedit.png'),'<b>Modelica Converter</b>',self)
self.omedit.triggered.connect(self.open_OMedit)
self.omoptim=QtGui.QAction(QtGui.QIcon('res/images/omoptim.png'),'<b>OM Optimisation</b>',self)
self.omoptim.triggered.connect(self.open_OMoptim)
#Adding Action Widget to tool bar
self.lefttoolbar = QtGui.QToolBar('Left ToolBar')
self.addToolBar(QtCore.Qt.LeftToolBarArea, self.lefttoolbar)
self.lefttoolbar.addAction(self.kicad)
self.lefttoolbar.addAction(self.conversion)
self.lefttoolbar.addAction(self.ngspice)
self.lefttoolbar.addAction(self.model)
self.lefttoolbar.addAction(self.subcircuit)
self.lefttoolbar.addAction(self.nghdl)
self.lefttoolbar.addAction(self.omedit)
self.lefttoolbar.addAction(self.omoptim)
self.lefttoolbar.setOrientation(QtCore.Qt.Vertical)
self.lefttoolbar.setIconSize(QSize(40,40))
def closeEvent(self, event):
exit_msg = "Are you sure you want to exit the program ? All unsaved data will be lost."
reply = QtGui.QMessageBox.question(self, 'Message',
exit_msg, QtGui.QMessageBox.Yes, QtGui.QMessageBox.No)
if reply == QtGui.QMessageBox.Yes:
for proc in self.obj_appconfig.procThread_list:
try:
proc.terminate()
except:
pass
try:
for process_object in self.obj_appconfig.process_obj:
try:
process_object.close()
except:
pass
except:
pass
##Just checking if open project and New project window is open. If yes just close it when application is closed
try:
self.project.close()
except:
pass
event.accept()
self.systemTrayIcon.showMessage('Exit', 'eSim is Closed.')
elif reply == QtGui.QMessageBox.No:
event.ignore()
def close_project(self):
print "Function : Close Project"
current_project = self.obj_appconfig.current_project['ProjectName']
if current_project==None:
pass
else:
for pid in self.obj_appconfig.proc_dict[self.obj_appconfig.current_project['ProjectName']]:
try:
os.kill(pid, 9)
except:
pass
self.obj_Mainview.obj_dockarea.closeDock()
self.obj_appconfig.current_project['ProjectName'] = None
self.systemTrayIcon.showMessage('Close', 'Current project '+os.path.basename(current_project)+' is Closed.')
def new_project(self):
"""
This function call New Project Info class.
"""
text, ok = QtGui.QInputDialog.getText(self, 'New Project Info','Enter Project Name:')
if ok:
self.projname = (str(text))
self.project = NewProjectInfo()
directory, filelist =self.project.createProject(self.projname)
self.obj_Mainview.obj_projectExplorer.addTreeNode(directory, filelist)
else:
print "No new project created"
self.obj_appconfig.print_info('No new project created')
try:
self.obj_appconfig.print_info('Current project is : ' + self.obj_appconfig.current_project["ProjectName"])
except:
pass
def open_project(self):
"""
This function call Open Project Info class
"""
print "Function : Open Project"
self.project = OpenProjectInfo()
try:
directory, filelist = self.project.body()
self.obj_Mainview.obj_projectExplorer.addTreeNode(directory, filelist)
except:
pass
def wrkspc_change(self):
"""
This function calls Change workspace dialog
"""
print "Function : Change Workspace"
self.obj_workspace.returnWhetherClickedOrNot(self)
self.hide()
self.obj_workspace.show()
def help_project(self):
print "Function : Help"
self.obj_appconfig.print_info('Help is called')
print "Current Project is : ",self.obj_appconfig.current_project
self.obj_Mainview.obj_dockarea.usermanual()
def open_ngspice(self):
"""
This Function execute ngspice on current project
"""
self.projDir = self.obj_appconfig.current_project["ProjectName"]
if self.projDir != None:
self.obj_Mainview.obj_dockarea.ngspiceEditor(self.projDir)
#Calling Python Plotting
try:
self.obj_Mainview.obj_dockarea.plottingEditor()
except Exception as e:
self.msg = QtGui.QErrorMessage(None)
self.msg.showMessage('Error while opening python plotting Editor.\
Please look at console for more details ')
print "Exception Message:",str(e)
self.obj_appconfig.print_error('Exception Message : ' + str(e))
self.msg.setWindowTitle("Error Message")
else:
self.msg = QtGui.QErrorMessage()
self.msg.showMessage('Please select the project first. You can either create new project or open existing project')
self.msg.setWindowTitle("Error Message")
def open_subcircuit(self):
print "Function : Subcircuit editor"
self.obj_appconfig.print_info('Subcircuit editor is called')
self.obj_Mainview.obj_dockarea.subcircuiteditor()
def open_nghdl(self):
print "Function : Nghdl"
self.obj_appconfig.print_info('Nghdl is called')
if self.obj_validation.validateTool('nghdl'):
self.cmd = 'nghdl -e'
self.obj_workThread = Worker.WorkerThread(self.cmd)
self.obj_workThread.start()
else:
self.msg = QtGui.QErrorMessage(None)
self.msg.showMessage('Error while opening nghdl. Please make sure nghdl is installed')
self.obj_appconfig.print_error('Error while opening nghdl. Please make sure nghdl is installed')
self.msg.setWindowTitle('nghdl Error Message')
def open_modelEditor(self):
print "Function : Model editor"
self.obj_appconfig.print_info('Model editor is called')
self.obj_Mainview.obj_dockarea.modelEditor()
def open_OMedit(self):
"""
This function call ngspice to OM edit converter and then launch OM edit.
"""
self.obj_appconfig.print_info('OM edit is called')
self.projDir = self.obj_appconfig.current_project["ProjectName"]
if self.projDir != None:
if self.obj_validation.validateCirOut(self.projDir):
self.projName = os.path.basename(self.projDir)
self.ngspiceNetlist = os.path.join(self.projDir,self.projName+".cir.out")
self.modelicaNetlist = os.path.join(self.projDir,self.projName+".mo")
"""
try:
#Creating a command for Ngspice to Modelica converter
self.cmd1 = "python ../ngspicetoModelica/NgspicetoModelica.py "+self.ngspiceNetlist
self.obj_workThread1 = Worker.WorkerThread(self.cmd1)
self.obj_workThread1.start()
if self.obj_validation.validateTool("OMEdit"):
#Creating command to run OMEdit
self.cmd2 = "OMEdit "+self.modelicaNetlist
self.obj_workThread2 = Worker.WorkerThread(self.cmd2)
self.obj_workThread2.start()
else:
self.msg = QtGui.QMessageBox()
self.msgContent = "There was an error while opening OMEdit.<br/>\
Please make sure OpenModelica is installed in your system. <br/>\
To install it on Linux : Go to <a href=https://www.openmodelica.org/download/download-linux>OpenModelica Linux</a> and install nigthly build release.<br/>\
To install it on Windows : Go to <a href=https://www.openmodelica.org/download/download-windows>OpenModelica Windows</a> and install latest version.<br/>"
self.msg.setTextFormat(QtCore.Qt.RichText)
self.msg.setText(self.msgContent)
self.msg.setWindowTitle("Missing OpenModelica")
self.obj_appconfig.print_info(self.msgContent)
self.msg.exec_()
except Exception as e:
self.msg = QtGui.QErrorMessage()
self.msg.showMessage('Unable to convert NgSpice netlist to Modelica netlist :'+str(e))
self.msg.setWindowTitle("Ngspice to Modelica conversion error")
self.obj_appconfig.print_error(str(e))
"""
self.obj_Mainview.obj_dockarea.modelicaEditor(self.projDir)
else:
self.msg = QtGui.QErrorMessage()
self.msg.showMessage('Current project does not contain any ngspice file. Please create ngspice file with extension .cir.out')
self.msg.setWindowTitle("Missing Ngspice netlist")
else:
self.msg = QtGui.QErrorMessage()
self.msg.showMessage('Please select the project first. You can either create new project or open existing project')
self.msg.setWindowTitle("Error Message")
def open_OMoptim(self):
print "Function : OM Optim"
self.obj_appconfig.print_info('OM Optim is called')
#Check if OMOptim is installed
if self.obj_validation.validateTool("OMOptim"):
#Creating a command to run
self.cmd = "OMOptim"
self.obj_workThread = Worker.WorkerThread(self.cmd)
self.obj_workThread.start()
else:
self.msg = QtGui.QMessageBox()
self.msgContent = "There was an error while opening OMOptim.<br/>\
Please make sure OpenModelica is installed in your system. <br/>\
To install it on Linux : Go to <a href=https://www.openmodelica.org/download/download-linux>OpenModelica Linux</a> and install nigthly build release.<br/>\
To install it on Windows : Go to <a href=https://www.openmodelica.org/download/download-windows>OpenModelica Windows</a> and install latest version.<br/>"
self.msg.setTextFormat(QtCore.Qt.RichText)
self.msg.setText(self.msgContent)
self.msg.setWindowTitle("Error Message")
self.obj_appconfig.print_info(self.msgContent)
self.msg.exec_()
class Application(QtGui.QMainWindow):
"""This class initializes all objects used in this file."""
global project_name
def __init__(self, *args):
"""Initialize main Application window."""
# Calling __init__ of super class
QtGui.QMainWindow.__init__(self, *args)
# Flag for mode of operation. Default is set to offline mode.
self.online_flag = False
# Creating require Object
self.obj_workspace = Workspace.Workspace()
self.obj_Mainview = MainView()
self.obj_kicad = Kicad(self.obj_Mainview.obj_dockarea)
self.obj_appconfig = Appconfig()
self.obj_validation = Validation()
# Initialize all widget
self.setCentralWidget(self.obj_Mainview)
self.initToolBar()
self.setGeometry(self.obj_appconfig._app_xpos,
self.obj_appconfig._app_ypos,
self.obj_appconfig._app_width,
self.obj_appconfig._app_heigth)
self.setWindowTitle(self.obj_appconfig._APPLICATION)
self.showMaximized()
self.setWindowIcon(QtGui.QIcon('images/logo.png'))
self.systemTrayIcon = QtGui.QSystemTrayIcon(self)
self.systemTrayIcon.setIcon(QtGui.QIcon('images/logo.png'))
self.systemTrayIcon.setVisible(True)
def initToolBar(self):
"""
This function initializes Tool Bars.
It setups the icons, short-cuts and defining functonality for:
- Top-tool-bar (New project, Open project, Close project, \
Mode switch, Help option)
- Left-tool-bar (Open Schematic, Convert KiCad to NgSpice, \
Simuation, Model Editor, Subcircuit, NGHDL, Modelica \
Converter, OM Optimisation)
"""
# Top Tool bar
self.newproj = QtGui.QAction(QtGui.QIcon('images/newProject.png'),
'<b>New Project</b>', self)
self.newproj.setShortcut('Ctrl+N')
self.newproj.triggered.connect(self.new_project)
self.openproj = QtGui.QAction(QtGui.QIcon('images/openProject.png'),
'<b>Open Project</b>', self)
self.openproj.setShortcut('Ctrl+O')
self.openproj.triggered.connect(self.open_project)
self.closeproj = QtGui.QAction(QtGui.QIcon('images/closeProject.png'),
'<b>Close Project</b>', self)
self.closeproj.setShortcut('Ctrl+X')
self.closeproj.triggered.connect(self.close_project)
self.wrkspce = QtGui.QAction(QtGui.QIcon('images/workspace.ico'),
'<b>Change Workspace</b>', self)
self.wrkspce.setShortcut('Ctrl+W')
self.wrkspce.triggered.connect(self.change_workspace)
self.switchmode = None
self.validate_mode()
if self.online_flag is True:
self.switchmode = QtGui.QAction(QtGui.QIcon('images/online.png'),
'<b>Go Offline</b>', self)
elif self.online_flag is False:
self.switchmode = QtGui.QAction(QtGui.QIcon('images/offline.png'),
'<b>Go Online</b>', self)
elif self.online_flag is None:
self.switchmode = QtGui.QAction(
QtGui.QIcon('images/disable.png'),
'<b>Mode switching has been disabled. ' +
'Default mode set to offline</b>', self)
self.switchmode.setEnabled(False)
self.switchmode.setShortcut('Ctrl+G')
self.switchmode.triggered.connect(self.change_mode)
self.helpfile = QtGui.QAction(QtGui.QIcon('images/helpProject.png'),
'<b>Help</b>', self)
self.helpfile.setShortcut('Ctrl+H')
self.helpfile.triggered.connect(self.help_project)
self.topToolbar = self.addToolBar('Top Tool Bar')
self.topToolbar.addAction(self.newproj)
self.topToolbar.addAction(self.openproj)
self.topToolbar.addAction(self.closeproj)
self.topToolbar.addAction(self.wrkspce)
self.topToolbar.addAction(self.switchmode)
self.topToolbar.addAction(self.helpfile)
# This part is setting fossee logo to the right
# corner in the application window.
self.spacer = QtGui.QWidget()
self.spacer.setSizePolicy(QtGui.QSizePolicy.Expanding,
QtGui.QSizePolicy.Expanding)
self.topToolbar.addWidget(self.spacer)
self.logo = QtGui.QLabel()
self.logopic = QtGui.QPixmap(
os.path.join(os.path.abspath(''), 'images', 'fosseeLogo.png'))
self.logopic = self.logopic.scaled(QSize(150, 150),
QtCore.Qt.KeepAspectRatio)
self.logo.setPixmap(self.logopic)
self.logo.setStyleSheet("padding:0 15px 0 0;")
self.topToolbar.addWidget(self.logo)
# Left Tool bar Action Widget
self.kicad = QtGui.QAction(QtGui.QIcon('images/kicad.png'),
'<b>Open Schematic</b>', self)
self.kicad.triggered.connect(self.obj_kicad.openSchematic)
self.conversion = QtGui.QAction(QtGui.QIcon('images/ki-ng.png'),
'<b>Convert Kicad to Ngspice</b>',
self)
self.conversion.triggered.connect(self.obj_kicad.openKicadToNgspice)
self.ngspice = QtGui.QAction(QtGui.QIcon('images/ngspice.png'),
'<b>Simulation</b>', self)
self.ngspice.triggered.connect(self.open_ngspice)
self.model = QtGui.QAction(QtGui.QIcon('images/model.png'),
'<b>Model Editor</b>', self)
self.model.triggered.connect(self.open_modelEditor)
self.subcircuit = QtGui.QAction(QtGui.QIcon('images/subckt.png'),
'<b>Subcircuit</b>', self)
self.subcircuit.triggered.connect(self.open_subcircuit)
self.nghdl = QtGui.QAction(QtGui.QIcon('images/nghdl.png'),
'<b>Nghdl</b>', self)
self.nghdl.triggered.connect(self.open_nghdl)
self.omedit = QtGui.QAction(QtGui.QIcon('images/omedit.png'),
'<b>Modelica Converter</b>', self)
self.omedit.triggered.connect(self.open_OMedit)
self.omoptim = QtGui.QAction(QtGui.QIcon('images/omoptim.png'),
'<b>OM Optimisation</b>', self)
self.omoptim.triggered.connect(self.open_OMoptim)
# Adding Action Widget to tool bar
self.lefttoolbar = QtGui.QToolBar('Left ToolBar')
self.addToolBar(QtCore.Qt.LeftToolBarArea, self.lefttoolbar)
self.lefttoolbar.addAction(self.kicad)
self.lefttoolbar.addAction(self.conversion)
self.lefttoolbar.addAction(self.ngspice)
self.lefttoolbar.addAction(self.model)
self.lefttoolbar.addAction(self.subcircuit)
self.lefttoolbar.addAction(self.nghdl)
self.lefttoolbar.addAction(self.omedit)
self.lefttoolbar.addAction(self.omoptim)
self.lefttoolbar.setOrientation(QtCore.Qt.Vertical)
self.lefttoolbar.setIconSize(QSize(40, 40))
def closeEvent(self, event):
'''
This function closes the ongoing program (process).
When exit button is pressed a Message box pops out with \
exit message and buttons 'Yes', 'No'.
1. If 'Yes' is pressed:
- check that program (process) in procThread_list \
(a list made in Appconfig.py):
- if available it terminates that program.
- if the program (process) is not available, \
then check it in process_obj (a list made in \
Appconfig.py) and if found, it closes the program.
2. If 'No' is pressed:
- the program just continues as it was doing earlier.
'''
exit_msg = "Are you sure you want to exit the program?"
exit_msg += " All unsaved data will be lost."
reply = QtGui.QMessageBox.question(self, 'Message', exit_msg,
QtGui.QMessageBox.Yes,
QtGui.QMessageBox.No)
if reply == QtGui.QMessageBox.Yes:
for proc in self.obj_appconfig.procThread_list:
try:
proc.terminate()
except BaseException:
pass
try:
for process_object in self.obj_appconfig.process_obj:
try:
process_object.close()
except BaseException:
pass
except BaseException:
pass
# Check if "Open project" and "New project" window is open.
# If yes, just close it when application is closed.
try:
self.project.close()
except BaseException:
pass
event.accept()
self.systemTrayIcon.showMessage('Exit', 'eSim is Closed.')
elif reply == QtGui.QMessageBox.No:
event.ignore()
def new_project(self):
"""This function call New Project Info class."""
text, ok = QtGui.QInputDialog.getText(self, 'New Project Info',
'Enter Project Name:')
if ok:
self.projname = (str(text))
self.project = NewProjectInfo()
directory, filelist = self.project.createProject(self.projname)
self.obj_Mainview.obj_projectExplorer.addTreeNode(
directory, filelist)
else:
print("No new project created")
self.obj_appconfig.print_info('No new project created')
try:
self.obj_appconfig.print_info(
'Current project is : ' +
self.obj_appconfig.current_project["ProjectName"])
except BaseException:
pass
def open_project(self):
"""This project call Open Project Info class."""
print("Function : Open Project")
self.project = OpenProjectInfo()
try:
directory, filelist = self.project.body()
self.obj_Mainview.obj_projectExplorer.addTreeNode(
directory, filelist)
except BaseException:
pass
def close_project(self):
"""
This function closes the saved project.
It first checks whether project (file) is present in list.
- If present:
- it first kills that process-id.
- closes that file.
- Shows message "Current project <path_to_file> is closed"
- If not present: pass
"""
print("Function : Close Project")
current_project = self.obj_appconfig.current_project['ProjectName']
if current_project is None:
pass
else:
temp = self.obj_appconfig.current_project['ProjectName']
for pid in self.obj_appconfig.proc_dict[temp]:
try:
os.kill(pid, 9)
except BaseException:
pass
self.obj_Mainview.obj_dockarea.closeDock()
self.obj_appconfig.current_project['ProjectName'] = None
self.systemTrayIcon.showMessage(
'Close', 'Current project ' +
os.path.basename(current_project) + ' is Closed.')
def change_workspace(self):
"""
This function call changes Workspace
"""
print("Function : Change Workspace")
self.obj_workspace.returnWhetherClickedOrNot(self)
self.hide()
self.obj_workspace.show()
def validate_mode(self):
"""
This functions checks whether proper fp-lib-table* files are \
available or not. If not, then move appropriate files from \
library/supportFiles folder and set `self.online_flag` accordingly.
@params
@return
None
"""
remove = False
if self.obj_appconfig.kicad_path is not None:
if not os.path.exists(self.obj_appconfig.kicad_path +
"/fp-lib-table"):
remove = True
elif os.path.exists(self.obj_appconfig.kicad_path +
"/fp-lib-table-offline"):
if os.path.exists(self.obj_appconfig.kicad_path +
"/fp-lib-table-online"):
remove = True
os.remove(self.obj_appconfig.kicad_path + "/fp-lib-table")
else:
self.online_flag = True
else:
if not os.path.exists(self.obj_appconfig.kicad_path +
"/fp-lib-table-online"):
remove = True
os.remove(self.obj_appconfig.kicad_path + "/fp-lib-table")
else:
self.online_flag = False
if remove:
# Remove invalid files
if os.path.exists(self.obj_appconfig.kicad_path +
"/fp-lib-table-offline"):
os.remove(self.obj_appconfig.kicad_path +
"/fp-lib-table-offline")
if os.path.exists(self.obj_appconfig.kicad_path +
"/fp-lib-table-online"):
os.remove(self.obj_appconfig.kicad_path +
"/fp-lib-table-online")
# Restore original files
shutil.copy('library/supportFiles/fp-lib-table-online',
self.obj_appconfig.kicad_path + "/")
shutil.copy('library/supportFiles/fp-lib-table',
self.obj_appconfig.kicad_path + "/")
self.online_flag = False
else:
self.online_flag = None
def change_mode(self):
"""
- This function is used for changing mode of operation for KiCad. \
- There are three modes of operation :
- online
- offline
- disable
- If none of the KiCad tools (associated with eSim) are \
open, then validate this mode by calling the function \
`validate_mode` and depending on online_flag, swap \
appropriate fp-lib-table files.
- If any of the KiCad tools (associated with eSim) is open, \
then ask user to close all these tools.
- If `online_flag` is `None`, then disable this feature.
@params
@return
None
"""
if not self.obj_kicad.check_open_schematic():
self.validate_mode()
if self.online_flag is True:
os.rename(
self.obj_appconfig.kicad_path + "/fp-lib-table",
self.obj_appconfig.kicad_path + "/fp-lib-table-online")
os.rename(
self.obj_appconfig.kicad_path + "/fp-lib-table-offline",
self.obj_appconfig.kicad_path + "/fp-lib-table")
self.switchmode.setIcon(QtGui.QIcon('images/offline.png'))
self.switchmode.setText('<b>Go Online</b>')
self.switchmode.setEnabled(True)
self.online_flag = False
elif self.online_flag is False:
os.rename(
self.obj_appconfig.kicad_path + "/fp-lib-table",
self.obj_appconfig.kicad_path + "/fp-lib-table-offline")
os.rename(
self.obj_appconfig.kicad_path + "/fp-lib-table-online",
self.obj_appconfig.kicad_path + "/fp-lib-table")
self.switchmode.setIcon(QtGui.QIcon('images/online.png'))
self.switchmode.setText('<b>Go Offline</b>')
self.switchmode.setEnabled(True)
self.online_flag = True
elif self.online_flag is None:
self.switchmode.setIcon(QtGui.QIcon('images/disable.png'))
self.switchmode.setText(
'<b>Mode switching has been ' +
'disabled. Default mode set to offline</b>.')
self.switchmode.setEnabled(False)
else:
self.msg = QtGui.QErrorMessage()
self.msg.setWindowTitle("Error Message")
self.msg.setModal(True)
self.msg.showMessage('Please save and close all the Kicad ' +
'windows first, then change the mode')
self.msg.exec_()
def help_project(self):
"""
This function opens usermanual in dockarea.
- It prints the message ""Function : Help""
- Uses print_info() method of class Appconfig
from Configuration/Appconfig.py file.
- Call method usermanual() from ./DockArea.py.
"""
print("Function : Help")
self.obj_appconfig.print_info('Help is called')
print("Current Project is : ", self.obj_appconfig.current_project)
self.obj_Mainview.obj_dockarea.usermanual()
def open_ngspice(self):
"""This Function execute ngspice on current project."""
self.projDir = self.obj_appconfig.current_project["ProjectName"]
if self.projDir is not None:
self.obj_Mainview.obj_dockarea.ngspiceEditor(self.projDir)
currTime = time.time()
count = 0
while True:
try:
st = os.stat(os.path.join(self.projDir, "plot_data_i.txt"))
if st.st_mtime >= currTime:
break
except Exception:
pass
time.sleep(0.5)
# Fail Safe ===>
count += 1
if count >= 10:
raise Exception(
"Ngspice taking too long for simulation. "
"Check netlist file to change simulation parameters.")
# Calling Python Plotting
try:
self.obj_Mainview.obj_dockarea.plottingEditor()
except Exception as e:
self.msg = QtGui.QErrorMessage()
self.msg.setModal(True)
self.msg.setWindowTitle("Error Message")
self.msg.showMessage(
'Error while opening python plotting Editor.'
' Please look at console for more details.')
self.msg.exec_()
print("Exception Message:", str(e))
self.obj_appconfig.print_error('Exception Message : ' + str(e))
else:
self.msg = QtGui.QErrorMessage()
self.msg.setModal(True)
self.msg.setWindowTitle("Error Message")
self.msg.showMessage(
'Please select the project first.'
' You can either create new project or open existing project')
self.msg.exec_()
def open_subcircuit(self):
"""
This function opens 'subcircuit' option in left-tool-bar.
When 'subcircuit' icon is clicked wich is present in
left-tool-bar of main page:
- Meassge shown on screen "Subcircuit editor is called".
- 'subcircuiteditor()' function is called using object
'obj_dockarea' of class 'Mainview'.
"""
print("Function : Subcircuit editor")
self.obj_appconfig.print_info('Subcircuit editor is called')
self.obj_Mainview.obj_dockarea.subcircuiteditor()
def open_nghdl(self):
"""
This function calls NGHDL option in left-tool-bar.
It uses validateTool() method from Validation.py:
- If 'nghdl' is present in executables list then
it passes command 'nghdl -e' to WorkerThread class of
Worker.py.
- If 'nghdl' is not present, then it shows error message.
"""
print("Function : NGHDL")
self.obj_appconfig.print_info('NGHDL is called')
if self.obj_validation.validateTool('nghdl'):
self.cmd = 'nghdl -e'
self.obj_workThread = Worker.WorkerThread(self.cmd)
self.obj_workThread.start()
else:
self.msg = QtGui.QErrorMessage()
self.msg.setModal(True)
self.msg.setWindowTitle('NGHDL Error')
self.msg.showMessage('Error while opening NGHDL. ' +
'Please make sure it is installed')
self.obj_appconfig.print_error('Error while opening NGHDL. ' +
'Please make sure it is installed')
self.msg.exec_()
def open_modelEditor(self):
"""
This function opens model editor option in left-tool-bar.
When model editor icon is clicked which is present in
left-tool-bar of main page:
- Meassge shown on screen "Model editor is called".
- 'modeleditor()' function is called using object
'obj_dockarea' of class 'Mainview'.
"""
print("Function : Model editor")
self.obj_appconfig.print_info('Model editor is called')
self.obj_Mainview.obj_dockarea.modelEditor()
def open_OMedit(self):
"""
This function calls ngspice to OMEdit converter and then launch OMEdit.
"""
self.obj_appconfig.print_info('OMEdit is called')
self.projDir = self.obj_appconfig.current_project["ProjectName"]
if self.projDir is not None:
if self.obj_validation.validateCirOut(self.projDir):
self.projName = os.path.basename(self.projDir)
self.ngspiceNetlist = os.path.join(self.projDir,
self.projName + ".cir.out")
self.modelicaNetlist = os.path.join(self.projDir,
self.projName + ".mo")
"""
try:
# Creating a command for Ngspice to Modelica converter
self.cmd1 = "
python3 ../ngspicetoModelica/NgspicetoModelica.py "\
+self.ngspiceNetlist
self.obj_workThread1 = Worker.WorkerThread(self.cmd1)
self.obj_workThread1.start()
if self.obj_validation.validateTool("OMEdit"):
# Creating command to run OMEdit
self.cmd2 = "OMEdit "+self.modelicaNetlist
self.obj_workThread2 = Worker.WorkerThread(self.cmd2)
self.obj_workThread2.start()
else:
self.msg = QtGui.QMessageBox()
self.msgContent = "There was an error while
opening OMEdit.<br/>\
Please make sure OpenModelica is installed in your\
system. <br/>\
To install it on Linux : Go to\
<a href=https://www.openmodelica.org/download/\
download-linux>OpenModelica Linux</a> and \
install nigthly build release.<br/>\
To install it on Windows : Go to\
<a href=https://www.openmodelica.org/download/\
download-windows>OpenModelica Windows</a>\
and install latest version.<br/>"
self.msg.setTextFormat(QtCore.Qt.RichText)
self.msg.setText(self.msgContent)
self.msg.setWindowTitle("Missing OpenModelica")
self.obj_appconfig.print_info(self.msgContent)
self.msg.exec_()
except Exception as e:
self.msg = QtGui.QErrorMessage()
self.msg.setModal(True)
self.msg.setWindowTitle(
"Ngspice to Modelica conversion error")
self.msg.showMessage(
'Unable to convert NgSpice netlist to\
Modelica netlist :'+str(e))
self.msg.exec_()
self.obj_appconfig.print_error(str(e))
"""
self.obj_Mainview.obj_dockarea.modelicaEditor(self.projDir)
else:
self.msg = QtGui.QErrorMessage()
self.msg.setModal(True)
self.msg.setWindowTitle("Missing Ngspice netlist")
self.msg.showMessage(
'Current project does not contain any Ngspice file. ' +
'Please create Ngspice file with extension .cir.out')
self.msg.exec_()
else:
self.msg = QtGui.QErrorMessage()
self.msg.setModal(True)
self.msg.setWindowTitle("Error Message")
self.msg.showMessage(
'Please select the project first. ' +
'You can either create a new project or open existing project')
self.exec_()
def open_OMoptim(self):
"""
This function uses validateTool() method from Validation.py:
- If 'OMOptim' is present in executables list then
it passes command 'OMOptim' to WorkerThread class of Worker.py
- If 'OMOptim' is not present, then it shows error message with
link to download it on Linux and Windows.
"""
print("Function : OMOptim")
self.obj_appconfig.print_info('OMOptim is called')
# Check if OMOptim is installed
if self.obj_validation.validateTool("OMOptim"):
# Creating a command to run
self.cmd = "OMOptim"
self.obj_workThread = Worker.WorkerThread(self.cmd)
self.obj_workThread.start()
else:
self.msg = QtGui.QMessageBox()
self.msgContent = (
"There was an error while opening OMOptim.<br/>"
"Please make sure OpenModelica is installed in your"
" system.<br/>"
"To install it on Linux : Go to <a href="
"https://www.openmodelica.org/download/download-linux"
">OpenModelica Linux</a> and install nightly build"
" release.<br/>"
"To install it on Windows : Go to <a href="
"https://www.openmodelica.org/download/download-windows"
">OpenModelica Windows</a> and install latest version.<br/>")
self.msg.setTextFormat(QtCore.Qt.RichText)
self.msg.setText(self.msgContent)
self.msg.setWindowTitle("Error Message")
self.obj_appconfig.print_info(self.msgContent)
self.msg.exec_()
class Application(QtGui.QMainWindow):
global project_name
"""
Its our main window of application
"""
def __init__(self,*args):
"""
Initialize main Application window
"""
#Calling __init__ of super class
QtGui.QMainWindow.__init__(self,*args)
#Creating require Object
self.obj_workspace = Workspace.Workspace()
self.obj_Mainview = MainView()
self.obj_kicad = Kicad(self.obj_Mainview.obj_dockarea)
self.obj_appconfig = Appconfig()
#Initialize all widget
self.setCentralWidget(self.obj_Mainview)
self.initToolBar()
self.setGeometry(self.obj_appconfig._app_xpos,
self.obj_appconfig._app_ypos,
self.obj_appconfig._app_width,
self.obj_appconfig._app_heigth)
self.setWindowTitle(self.obj_appconfig._APPLICATION)
self.showMaximized()
self.setWindowIcon(QtGui.QIcon('../../images/logo.png'))
#self.show()
def initToolBar(self):
"""
This function initialize Tool Bar
"""
#Top Tool bar
self.newproj = QtGui.QAction(QtGui.QIcon('../../images/newProject.png'),'<b>New Project</b>',self)
self.newproj.setShortcut('Ctrl+N')
self.newproj.triggered.connect(self.new_project)
#self.newproj.connect(self.newproj,QtCore.SIGNAL('triggered()'),self,QtCore.SLOT(self.new_project()))
self.openproj = QtGui.QAction(QtGui.QIcon('../../images/openProject.png'),'<b>Open Project</b>',self)
self.openproj.setShortcut('Ctrl+O')
self.openproj.triggered.connect(self.open_project)
self.exitproj = QtGui.QAction(QtGui.QIcon('../../images/closeProject.png'),'<b>Exit</b>',self)
self.exitproj.setShortcut('Ctrl+X')
self.exitproj.triggered.connect(self.exit_project)
self.helpfile = QtGui.QAction(QtGui.QIcon('../../images/helpProject.png'),'<b>Help</b>',self)
self.helpfile.setShortcut('Ctrl+H')
self.helpfile.triggered.connect(self.help_project)
self.topToolbar = self.addToolBar('Top Tool Bar')
self.topToolbar.addAction(self.newproj)
self.topToolbar.addAction(self.openproj)
self.topToolbar.addAction(self.exitproj)
self.topToolbar.addAction(self.helpfile)
self.spacer = QtGui.QWidget()
self.spacer.setSizePolicy(QtGui.QSizePolicy.Expanding,QtGui.QSizePolicy.Expanding)
self.topToolbar.addWidget(self.spacer)
self.logo = QtGui.QLabel()
self.logopic = QtGui.QPixmap(os.path.join(os.path.abspath('../..'),'images','fosseeLogo.png'))
self.logopic = self.logopic.scaled(QSize(150,150),QtCore.Qt.KeepAspectRatio)
self.logo.setPixmap(self.logopic)
self.logo.setStyleSheet("padding:0 15px 0 0;")
self.topToolbar.addWidget(self.logo)
#Left Tool bar Action Widget
self.kicad = QtGui.QAction(QtGui.QIcon('../../images/kicad.png'),'<b>Open Schematic</b>',self)
self.kicad.triggered.connect(self.obj_kicad.openSchematic)
self.conversion = QtGui.QAction(QtGui.QIcon('../../images/ki-ng.png'),'<b>Convert Kicad to Ngspice</b>',self)
self.conversion.triggered.connect(self.obj_kicad.openKicadToNgspice)
self.ngspice = QtGui.QAction(QtGui.QIcon('../../images/ngspice.png'), '<b>Simulation</b>', self)
self.ngspice.triggered.connect(self.open_ngspice)
self.footprint = QtGui.QAction(QtGui.QIcon('../../images/footprint.png'),'<b>Footprint Editor</b>',self)
self.footprint.triggered.connect(self.obj_kicad.openFootprint)
self.pcb = QtGui.QAction(QtGui.QIcon('../../images/pcb.png'),'<b>PCB Layout</b>',self)
self.pcb.triggered.connect(self.obj_kicad.openLayout)
self.model = QtGui.QAction(QtGui.QIcon('../../images/model.png'),'<b>Model Editor</b>',self)
self.model.triggered.connect(self.open_modelEditor)
self.subcircuit=QtGui.QAction(QtGui.QIcon('../../images/subckt.png'),'<b>Subcircuit</b>',self)
self.subcircuit.triggered.connect(self.open_subcircuit)
#Adding Action Widget to tool bar
self.lefttoolbar = QtGui.QToolBar('Left ToolBar')
self.addToolBar(QtCore.Qt.LeftToolBarArea, self.lefttoolbar)
self.lefttoolbar.addAction(self.kicad)
self.lefttoolbar.addAction(self.conversion)
self.lefttoolbar.addAction(self.ngspice)
self.lefttoolbar.addAction(self.footprint)
self.lefttoolbar.addAction(self.pcb)
self.lefttoolbar.addAction(self.model)
self.lefttoolbar.addAction(self.subcircuit)
self.lefttoolbar.setOrientation(QtCore.Qt.Vertical)
self.lefttoolbar.setIconSize(QSize(40,40))
def new_project(self):
"""
This function call New Project Info class.
"""
text, ok = QtGui.QInputDialog.getText(self, 'New Project Info','Enter Project Name:')
if ok:
self.projname = (str(text))
self.project = NewProjectInfo()
directory, filelist =self.project.createProject(self.projname)
self.obj_Mainview.obj_projectExplorer.addTreeNode(directory, filelist)
else:
print "No project created"
self.obj_appconfig.print_info('No new project created')
try:
self.obj_appconfig.print_info('Current project is : ' + self.obj_appconfig.current_project["ProjectName"])
except:
pass
def open_project(self):
"""
This project call Open Project Info class
"""
print "Open Project called"
self.project = OpenProjectInfo()
try:
directory, filelist = self.project.body()
self.obj_Mainview.obj_projectExplorer.addTreeNode(directory, filelist)
except:
pass
def open_ngspice(self):
"""
This Function execute ngspice on current project
"""
self.projDir = self.obj_appconfig.current_project["ProjectName"]
if self.projDir != None:
self.obj_Mainview.obj_dockarea.ngspiceEditor(self.projDir)
time.sleep(2) #Need permanent solution
#Calling Python Plotting
try:
self.obj_Mainview.obj_dockarea.plottingEditor()
except Exception as e:
self.msg = QtGui.QErrorMessage(None)
self.msg.showMessage('Error while opening python plotting Editor.')
print "Exception:",str(e)
self.obj_appconfig.print_error('Exception generated : ' + str(e))
self.msg.setWindowTitle("Error Message")
else:
self.msg = QtGui.QErrorMessage()
self.msg.showMessage('Please select the project first. You can either create new project or open existing project')
self.msg.setWindowTitle("Error Message")
def open_subcircuit(self):
print "Subcircuit editor is called"
self.obj_appconfig.print_info('Subcircuit editor is called')
self.obj_Mainview.obj_dockarea.subcircuiteditor()
def exit_project(self):
print "Exit Project called"
for proc in self.obj_appconfig.procThread_list:
try:
proc.terminate()
except:
pass
##Just checking if open and New window is open. If yes just close it when application is closed
try:
self.project.close()
except:
pass
self.close()
def help_project(self):
print "Help is called"
self.obj_appconfig.print_info('Help is called')
print "Current Project : ",self.obj_appconfig.current_project
#self.obj_appconfig.print_info('Current Project : ' + self.obj_appconfig.current_project['ProjectName'])
#self.obj_Mainview.obj_dockarea.plottingEditor()
def open_modelEditor(self):
print "model editor is called"
self.obj_appconfig.print_info('model editor is called')
self.obj_Mainview.obj_dockarea.modelEditor()
"""
def open_kicadToNgspice(self):
print "kicadToNgspice is called"
self.obj_appconfig.print_info('kicadToNgspice is called')
self.obj_Mainview.obj_dockarea.kicadToNgspiceEditor()"""
def testing(self):
print "Success hit kicad button"
class Application(QtGui.QMainWindow):
global project_name
"""
Its our main window of application
"""
def __init__(self, *args):
"""
Initialize main Application window
"""
#Calling __init__ of super class
QtGui.QMainWindow.__init__(self, *args)
#Creating require Object
self.obj_workspace = Workspace.Workspace()
self.obj_Mainview = MainView()
self.obj_kicad = Kicad(self.obj_Mainview.obj_dockarea)
self.obj_appconfig = Appconfig()
#Initialize all widget
self.setCentralWidget(self.obj_Mainview)
self.initToolBar()
self.setGeometry(self.obj_appconfig._app_xpos,
self.obj_appconfig._app_ypos,
self.obj_appconfig._app_width,
self.obj_appconfig._app_heigth)
self.setWindowTitle(self.obj_appconfig._APPLICATION)
self.showMaximized()
self.setWindowIcon(QtGui.QIcon('../../images/logo.png'))
#self.show()
def initToolBar(self):
"""
This function initialize Tool Bar
"""
#Top Tool bar
self.newproj = QtGui.QAction(
QtGui.QIcon('../../images/newProject.png'), '<b>New Project</b>',
self)
self.newproj.setShortcut('Ctrl+N')
self.newproj.triggered.connect(self.new_project)
#self.newproj.connect(self.newproj,QtCore.SIGNAL('triggered()'),self,QtCore.SLOT(self.new_project()))
self.openproj = QtGui.QAction(
QtGui.QIcon('../../images/openProject.png'), '<b>Open Project</b>',
self)
self.openproj.setShortcut('Ctrl+O')
self.openproj.triggered.connect(self.open_project)
self.exitproj = QtGui.QAction(
QtGui.QIcon('../../images/closeProject.png'), '<b>Exit</b>', self)
self.exitproj.setShortcut('Ctrl+X')
self.exitproj.triggered.connect(self.exit_project)
self.helpfile = QtGui.QAction(
QtGui.QIcon('../../images/helpProject.png'), '<b>Help</b>', self)
self.helpfile.setShortcut('Ctrl+H')
self.helpfile.triggered.connect(self.help_project)
self.topToolbar = self.addToolBar('Top Tool Bar')
self.topToolbar.addAction(self.newproj)
self.topToolbar.addAction(self.openproj)
self.topToolbar.addAction(self.exitproj)
self.topToolbar.addAction(self.helpfile)
self.spacer = QtGui.QWidget()
self.spacer.setSizePolicy(QtGui.QSizePolicy.Expanding,
QtGui.QSizePolicy.Expanding)
self.topToolbar.addWidget(self.spacer)
self.logo = QtGui.QLabel()
self.logopic = QtGui.QPixmap(
os.path.join(os.path.abspath('../..'), 'images', 'fosseeLogo.png'))
self.logopic = self.logopic.scaled(QSize(150, 150),
QtCore.Qt.KeepAspectRatio)
self.logo.setPixmap(self.logopic)
self.logo.setStyleSheet("padding:0 15px 0 0;")
self.topToolbar.addWidget(self.logo)
#Left Tool bar Action Widget
self.kicad = QtGui.QAction(QtGui.QIcon('../../images/kicad.png'),
'<b>Open Schematic</b>', self)
self.kicad.triggered.connect(self.obj_kicad.openSchematic)
self.conversion = QtGui.QAction(QtGui.QIcon('../../images/ki-ng.png'),
'<b>Convert Kicad to Ngspice</b>',
self)
self.conversion.triggered.connect(self.obj_kicad.openKicadToNgspice)
self.ngspice = QtGui.QAction(QtGui.QIcon('../../images/ngspice.png'),
'<b>Simulation</b>', self)
self.ngspice.triggered.connect(self.open_ngspice)
self.footprint = QtGui.QAction(
QtGui.QIcon('../../images/footprint.png'),
'<b>Footprint Editor</b>', self)
self.footprint.triggered.connect(self.obj_kicad.openFootprint)
self.pcb = QtGui.QAction(QtGui.QIcon('../../images/pcb.png'),
'<b>PCB Layout</b>', self)
self.pcb.triggered.connect(self.obj_kicad.openLayout)
self.model = QtGui.QAction(QtGui.QIcon('../../images/model.png'),
'<b>Model Editor</b>', self)
self.model.triggered.connect(self.open_modelEditor)
self.subcircuit = QtGui.QAction(QtGui.QIcon('../../images/subckt.png'),
'<b>Subcircuit</b>', self)
self.subcircuit.triggered.connect(self.open_subcircuit)
#Adding Action Widget to tool bar
self.lefttoolbar = QtGui.QToolBar('Left ToolBar')
self.addToolBar(QtCore.Qt.LeftToolBarArea, self.lefttoolbar)
self.lefttoolbar.addAction(self.kicad)
self.lefttoolbar.addAction(self.conversion)
self.lefttoolbar.addAction(self.ngspice)
self.lefttoolbar.addAction(self.footprint)
self.lefttoolbar.addAction(self.pcb)
self.lefttoolbar.addAction(self.model)
self.lefttoolbar.addAction(self.subcircuit)
self.lefttoolbar.setOrientation(QtCore.Qt.Vertical)
self.lefttoolbar.setIconSize(QSize(40, 40))
def new_project(self):
"""
This function call New Project Info class.
"""
text, ok = QtGui.QInputDialog.getText(self, 'New Project Info',
'Enter Project Name:')
if ok:
self.projname = (str(text))
self.project = NewProjectInfo()
directory, filelist = self.project.createProject(self.projname)
self.obj_Mainview.obj_projectExplorer.addTreeNode(
directory, filelist)
else:
print "No project created"
self.obj_appconfig.print_info('No new project created')
try:
self.obj_appconfig.print_info(
'Current project is : ' +
self.obj_appconfig.current_project["ProjectName"])
except:
pass
def open_project(self):
"""
This project call Open Project Info class
"""
print "Open Project called"
self.project = OpenProjectInfo()
try:
directory, filelist = self.project.body()
self.obj_Mainview.obj_projectExplorer.addTreeNode(
directory, filelist)
except:
pass
def open_ngspice(self):
"""
This Function execute ngspice on current project
"""
self.projDir = self.obj_appconfig.current_project["ProjectName"]
if self.projDir != None:
self.obj_Mainview.obj_dockarea.ngspiceEditor(self.projDir)
time.sleep(2) #Need permanent solution
#Calling Python Plotting
try:
self.obj_Mainview.obj_dockarea.plottingEditor()
except Exception as e:
self.msg = QtGui.QErrorMessage(None)
self.msg.showMessage(
'Error while opening python plotting Editor.')
print "Exception:", str(e)
self.obj_appconfig.print_error('Exception generated : ' +
str(e))
self.msg.setWindowTitle("Error Message")
else:
self.msg = QtGui.QErrorMessage()
self.msg.showMessage(
'Please select the project first. You can either create new project or open existing project'
)
self.msg.setWindowTitle("Error Message")
def open_subcircuit(self):
print "Subcircuit editor is called"
self.obj_appconfig.print_info('Subcircuit editor is called')
self.obj_Mainview.obj_dockarea.subcircuiteditor()
def exit_project(self):
print "Exit Project called"
for proc in self.obj_appconfig.procThread_list:
try:
proc.terminate()
except:
pass
##Just checking if open and New window is open. If yes just close it when application is closed
try:
self.project.close()
except:
pass
self.close()
def help_project(self):
print "Help is called"
self.obj_appconfig.print_info('Help is called')
print "Current Project : ", self.obj_appconfig.current_project
self.obj_Mainview.obj_dockarea.usermanual()
def open_modelEditor(self):
print "model editor is called"
self.obj_appconfig.print_info('model editor is called')
self.obj_Mainview.obj_dockarea.modelEditor()
"""
def open_kicadToNgspice(self):
print "kicadToNgspice is called"
self.obj_appconfig.print_info('kicadToNgspice is called')
self.obj_Mainview.obj_dockarea.kicadToNgspiceEditor()"""
def testing(self):
print "Success hit kicad button"
