def __init__(self,
N,
verbose=False,
drawing=False,
bounds=(-0.05, 0.05),
shots=0,
sym_translation=False,
sym_reflection=False,
name='Unnamed'):
"""
Args:
N (int): number of qubits
verbose (bool): whether or not to output messages about the circuit
drawing (bool): whether to draw the circuit instead of computing
bounds (tuple): lower and upper bound for random initial parameters
shots (int): number of shots for evaluation
sym_translation (bool): whether or not the circuit and the
Hamiltonian are invariant under translation
sym_reflection (bool): whether or not the circuit and Hamiltonian
are invariant under reflection. requires
sym_translation=True
name (str): name of the circuit
Returns:
Sets:
N (arg)
verbose (arg)
drawing (arg)
bounds (arg)
shots (arg)
sym_translation (arg)
sym_reflection (arg)
eng (projectq.MainEngine)
name (arg)
Comments:
draw() requires drawing=True
sym_reflection=True requires sym_translation=True
"""
# if we use reflection symmetry, require translation symmetry and N%2=0
if sym_reflection:
assert sym_translation, ('Only use sym_reflection together with '
'sym_translation')
assert N % 2 == 0, ('Only use sym_reflection for even N')
self.N = N
self.verbose = verbose
self.drawing = drawing
self.bounds = bounds
self.shots = shots
self.sym_translation = sym_translation
self.sym_reflection = sym_reflection
self.name = name
if drawing:
self.eng = pq.MainEngine(backend=pq.backends.CircuitDrawer(),
engine_list=[])
else:
self.eng = pq.MainEngine(backend=pq.backends.Simulator(),
engine_list=[])
def test_trotter_order_does_not_matter_for_high_trotter_number(self):
size = 4
hamiltonian = dual_basis_hamiltonian(n_dimensions=1, system_size=size)
hamiltonian.compress()
eng1 = projectq.MainEngine()
eng2 = projectq.MainEngine()
reg1 = eng1.allocate_qureg(size)
reg2 = eng2.allocate_qureg(size)
eng1.flush()
eng2.flush()
# Choose random state.
state = numpy.zeros(2**size, dtype=complex)
for i in range(len(state)):
state[i] = (random.random() *
numpy.exp(1j * 2 * numpy.pi * random.random()))
state /= numpy.linalg.norm(state)
# Put randomly chosen state in the registers.
eng1.backend.set_wavefunction(state, reg1)
eng2.backend.set_wavefunction(state, reg2)
# Swap and change the input ordering for reg1. These operations should
# cancel each other out.
projectq.ops.Swap | (reg1[1], reg1[2])
projectq.ops.C(projectq.ops.Z) | (reg1[1], reg1[2])
_low_depth_trotter_simulation.simulate_dual_basis_evolution(
reg1,
hamiltonian=hamiltonian,
trotter_steps=7,
input_ordering=[0, 2, 1, 3],
first_order=False)
_low_depth_trotter_simulation.simulate_dual_basis_evolution(
reg2, hamiltonian=hamiltonian, trotter_steps=7, first_order=False)
# Undo the inital swaps on reg1.
projectq.ops.Swap | (reg1[1], reg1[2])
projectq.ops.C(projectq.ops.Z) | (reg1[1], reg1[2])
projectq.ops.All(projectq.ops.H) | reg1
eng1.flush()
projectq.ops.All(projectq.ops.H) | reg2
eng2.flush()
self.assertTrue(
numpy.allclose(ordered_wavefunction(eng1),
ordered_wavefunction(eng2),
atol=1e-2))
projectq.ops.All(projectq.ops.Measure) | reg1
projectq.ops.All(projectq.ops.Measure) | reg2
def d_cal(vec1, vec2):
"""
a function that calculate the euclid distance in a quantum way
:param vec1: a list form vector, like [1, 2, 3, 5], totally 2^n elements
:param vec2: a list form vector, with the same shape of vec1
:return: distance between vec1 and vec2
"""
# first normalize the two vectors:
norm1 = np.linalg.norm(np.array(vec1))
norm2 = np.linalg.norm(np.array(vec2))
print(norm1, norm2)
theta = np.arcsin(abs(norm1 / np.sqrt(norm1**2 + norm2**2)))
u_wavefun = vec1 / norm1
v_wavefun = vec2 / norm2
wavefun = (np.kron(np.array([1, 0]), np.array(u_wavefun)) +
np.kron(np.array([0, 1]), np.array(v_wavefun))) / np.sqrt(2)
# print(wavefun)
# projectq setup
eng = projectq.MainEngine()
qureg = eng.allocate_qureg(int(np.log2(len(vec1))) + 1)
eng.flush()
eng.backend.set_wavefunction(wavefun, qureg)
H | qureg[-1]
Ry(2 * theta - np.pi / 2) | qureg[-1]
eng.flush()
prop = eng.backend.get_probability('1', [qureg[-1]])
Measure | qureg
print(prop)
return np.sqrt(2 * prop * (norm1**2 + norm2**2))
def reset(self):
"""Reset/initialize the device by initializing the backend and engine, and allocating qubits.
"""
backend = pq.backends.ClassicalSimulator(
**self.filter_kwargs_for_backend(self._kwargs))
self._eng = pq.MainEngine(backend, verbose=self._kwargs['verbose'])
super().reset()
def __init__(self, x, y, n_qubits, epoch):
"""
Initialization of the class
:param x: (ndarray, shape(num_data, 2)), two elements represents HR and VR
:param y: (ndarray, shape(num_data, 1)), label of corresponding data
:param n_qubits: the number of qubits that represent one element of a vector in x
:param epoch: the maximum iteration of the optimization
"""
n = len(x)
self.train_x = x[0:(n - round(n / 6))]
self.train_y = y[0:(n - round(n / 6))]
self.test_x = x[(n - round(n / 6)):]
self.test_y = y[(n - round(n / 6)):]
self.epoch = epoch
self.n_qubits1data = n_qubits
self.n_qubits = len(
self.train_x[0]
) * n_qubits + 2 # two qubits for one ancilla qubit and one output qubit
self.alpha = np.pi * np.random.rand(
len(self.train_x[0]) + 1) - np.pi / 2 # the last one is the bios
self.init_wavefun = np.zeros(len(self.train_x[0])**self.n_qubits)
self.init_wavefun[0] = 1 # set the wave_function to |0>
self.eng = projectq.MainEngine()
self.qureg = self.eng.allocate_qureg(self.n_qubits)
self.eng.flush()
self.data2theta(
self.train_x) # transform the data into binary representation
self.data2theta(self.test_x)
self.loss = []
def test_restriction():
engine_list = grid_setup.get_engine_list(num_rows=3, num_columns=2,
one_qubit_gates=(Rz, H),
two_qubit_gates=(CNOT,
AddConstant))
backend = DummyEngine(save_commands=True)
eng = projectq.MainEngine(backend, engine_list)
qubit1 = eng.allocate_qubit()
qubit2 = eng.allocate_qubit()
qubit3 = eng.allocate_qubit()
eng.flush()
CNOT | (qubit1, qubit2)
H | qubit1
Rz(0.2) | qubit1
Measure | qubit1
Swap | (qubit1, qubit2)
Rx(0.1) | (qubit1)
AddConstant(1) | qubit1 + qubit2 + qubit3
eng.flush()
assert backend.received_commands[4].gate == X
assert len(backend.received_commands[4].control_qubits) == 1
assert backend.received_commands[5].gate == H
assert backend.received_commands[6].gate == Rz(0.2)
assert backend.received_commands[7].gate == Measure
for cmd in backend.received_commands[7:]:
assert cmd.gate != Swap
assert not isinstance(cmd.gate, Rx)
assert not isinstance(cmd.gate, AddConstant)
def __init__(self, v_input, v_output):
self.v_in = v_input
self.v_tgt = v_output
self.theta = np.pi * (np.random.rand(3))
self.eng = projectq.MainEngine()
self.qureg = self.eng.allocate_qureg(1)
self.eng.flush()
def test_chooser_Ry_reducer():
# Without the chooser_Ry_reducer function, i.e. if the restricted gate set
# just picked the first option in each decomposition list, the circuit
# below would be decomposed into 8 single qubit gates and 1 two qubit
# gate.
#
# Including the Allocate, Measure and Flush commands, this would result in
# 13 commands.
#
# Using the chooser_Rx_reducer you get 10 commands, since you now have 4
# single qubit gates and 1 two qubit gate.
for engine_list, count in [
(restrictedgateset.get_engine_list(one_qubit_gates=(Rx, Ry),
two_qubit_gates=(Rxx, )), 13),
(get_engine_list(), 11)
]:
backend = DummyEngine(save_commands=True)
eng = projectq.MainEngine(backend, engine_list, verbose=True)
qubit1 = eng.allocate_qubit()
qubit2 = eng.allocate_qubit()
H | qubit1
CNOT | (qubit1, qubit2)
Rz(0.2) | qubit1
Measure | qubit1
eng.flush()
assert len(backend.received_commands) == count
def test_average_fidelity_on_bit_flip_chanel():
r"""Test the average fidelity of the bit flip map."""
qubits = 1
dim = 2**qubits
for i, prob_error in enumerate([1., 0.5, 0.25]): # Test different probabilities
# Obtain the actual true answer
kraus = [np.sqrt(1 - prob_error) * np.eye(dim),
np.sqrt(prob_error) * np.array([[0., 1.],
[1., 0.]])]
true_answer = (np.abs(np.trace(kraus[0]))**2 + np.abs(np.trace(kraus[1]))**2 + dim) /\
(dim**2 + dim)
# Construct the channel and perform average fidelity estimation.
eng = projectq.MainEngine()
register = eng.allocate_qureg(qubits)
eng.flush() # Need to flush it in order to set_wavefunction
def bit_flip(engine, register):
rando = np.random.random() # Get uniform random number from zero to one..
if rando < prob_error: # If it is less than probability of error.
XGate() | register
engine.flush()
chan_dev = QDeviceChannel(eng, register, bit_flip)
fidelity = chan_dev.estimate_average_fidelity_channel(500, 0.001, cheat=bool(i % 2))
assert np.abs(fidelity - true_answer) < 1e-1
def test_state_preparation(n_qubits, zeros):
engine_list = restrictedgateset.get_engine_list(one_qubit_gates=(Ry, Rz,
Ph))
eng = projectq.MainEngine(engine_list=engine_list)
qureg = eng.allocate_qureg(n_qubits)
eng.flush()
f_state = [
0.2 + 0.1 * x * cmath.exp(0.1j + 0.2j * x) for x in range(2**n_qubits)
]
if zeros:
for i in range(2**(n_qubits - 1)):
f_state[i] = 0
norm = 0
for amplitude in f_state:
norm += abs(amplitude)**2
f_state = [x / math.sqrt(norm) for x in f_state]
StatePreparation(f_state) | qureg
eng.flush()
wavefunction = deepcopy(eng.backend.cheat()[1])
# Test that simulator hasn't reordered wavefunction
mapping = eng.backend.cheat()[0]
for key in mapping:
assert mapping[key] == key
All(Measure) | qureg
eng.flush()
assert np.allclose(wavefunction, f_state, rtol=1e-10, atol=1e-10)
def test_inverse_of_unitary_two_design():
r"""Test inverse of unitary two design with the unitary two design is the identity."""
eng = projectq.MainEngine()
register = eng.allocate_qureg(4)
eng.flush() # Need to flush it in order to set_wavefunction
def identity(engine):
pass
chan_dev = ProjectQDeviceAdaptor(eng, register)
for index in range(0, 2 ** 4):
for _ in range(0, 25):
# Set the wave-function to match the basis state.
zero = [0.] * (2**4)
zero[index] = 1 # Turn Probability is one on the that basis state.
eng.backend.set_wavefunction(zero, register)
eng.flush()
epsilon = 1
phases = chan_dev.approximate_unitary_two_design(epsilon)
chan_dev.inverse_of_unitary_two_design(phases)
wave_function_after = np.array(eng.backend.cheat()[1])
assert np.all(np.abs(wave_function_after - np.array(zero)) < 1e-3)
All(Measure) | register
def uccsd_trotter_engine(compiler_backend=projectq.backends.Simulator(),
qubit_graph=None,
opt_size=None):
"""Define a ProjectQ compiler engine that is common for use with UCCSD
This defines a ProjectQ compiler engine that decomposes time evolution
gates using a first order Trotter decomposition on non-commuting gates
down to a base gate decomposition.
Args:
compiler_backend(projectq.backend): Define the backend on the
circuit compiler, so that it may either simulate gates numerically
or alternatively print a gate sequence, e.g. using
projectq.backends.CommandPrinter()
qubit_graph(Graph): Graph object specifying connectivity of qubits.
The values of the nodes of this unique qubit ids. If None,
all-to-all connectivity is assumed.
opt_size(int): Number for ProjectQ local optimizer to determine size
of blocks optimized over.
Returns:
projectq.cengine that is the compiler engine set up with these
rules and decompostions.
"""
rule_set = (projectq.cengines.DecompositionRuleSet(
modules=[projectq.setups.decompositions]))
# Set rules for splitting non-commuting operators
trotter_rule_set = (projectq.cengines.DecompositionRule(
gate_class=TimeEvolution,
gate_decomposer=_first_order_trotter,
gate_recognizer=_identify_non_commuting))
rule_set.add_decomposition_rule(trotter_rule_set)
# Set rules for 2 qubit gates that act on non-adjacent qubits
if qubit_graph is not None:
connectivity_rule_set = (projectq.cengines.DecompositionRule(
gate_class=projectq.ops.NOT.__class__,
gate_decomposer=(lambda x: _direct_graph_swap(x, qubit_graph)),
gate_recognizer=(
lambda x: _non_adjacent_filter(None, x, qubit_graph, True))))
rule_set.add_decomposition_rule(connectivity_rule_set)
# Build the full set of engines that will be applied to qubits
replacer = projectq.cengines.AutoReplacer(rule_set)
compiler_engine_list = [
replacer,
projectq.cengines.InstructionFilter(lambda x, y: (_non_adjacent_filter(
x, y, qubit_graph) and _two_gate_filter(x, y)))
]
if opt_size is not None:
compiler_engine_list.append(projectq.cengines.LocalOptimizer(opt_size))
# Start the compiler engine with these rules
compiler_engine = (projectq.MainEngine(backend=compiler_backend,
engine_list=compiler_engine_list))
return compiler_engine
def __init__(self):
self.theta = np.random.rand(2*3*3).reshape(3, 2, 3)
self.data = [(0, 0), (1, 0), (0, 1), (1, 1)]
self.label = [0, 1, 1, 0]
self.loss = []
self.eng = projectq.MainEngine()
self.qureg = self.eng.allocate_qureg(2)
self.eng.flush()
def test_PermutePi4Front():
eng = projectq.MainEngine()
perm = PermutePi4Front()
qubit = eng.allocate_qubit()
perm.next_engine = A()
perm.receive([X.generate_command(qubit)])
perm.receive([Y.generate_command(qubit)])
perm.receive([T.generate_command(qubit)])
perm.receive([FlushGate().generate_command(qubit)])
return
def reset(self):
"""Reset/initialize the device by initializing the backend and engine, and allocating qubits.
"""
backend = pq.backends.IBMBackend(num_runs=self.shots,
**self.filter_kwargs_for_backend(
self._kwargs))
self._eng = pq.MainEngine(backend,
verbose=self._kwargs['verbose'],
engine_list=pq.setups.ibm.get_engine_list())
super().reset()
def mv(v):
eng = projectq.MainEngine(backend=Simulator(), engine_list=[])
qureg = eng.allocate_qureg(n_sites)
eng.flush()
eng.backend.set_wavefunction(v, qureg)
eng.backend.apply_qubit_operator(hamiltonian, qureg)
order, output = deepcopy(eng.backend.cheat())
for i in order:
assert i == order[i]
eng.backend.set_wavefunction([1] + [0] * (2**n_sites - 1), qureg)
return output
def test_simple1():
eng = projectq.MainEngine(
engine_list=[BasisRotation()],
backend=OpenSurgeryExporter(output="test_simple_case1"),
verbose=True)
qubit1 = eng.allocate_qubit()
qubit2 = eng.allocate_qubit()
gates.T | qubit2
ParityMeasurementGate("Z0 X1") | qubit1 + qubit2
eng.flush()
del qubit1
del qubit2
#assert(False)
#now check output
with open("test_simple_case1") as fin:
line = fin.readline()
line = line.strip()
assert (line == "INIT 2")
line = fin.readline()
line = line.strip()
assert (line == "NEED A")
line = fin.readline()
line = line.strip()
assert (line == "MZZ A 1")
line = fin.readline()
line = line.strip()
assert (line == "MX A")
line = fin.readline()
line = line.strip()
assert (line == "S ANCILLA")
line = fin.readline()
line = line.strip()
assert (line == "MXX ANCILLA 1")
line = fin.readline()
line = line.strip()
assert (line == "H 1")
line = fin.readline()
line = line.strip()
assert (line == "MZZ 0 1")
os.remove("test_simple_case1")
def evl(psi0, ops, n_qubits):
eng = projectq.MainEngine()
wavefunction = eng.allocate_qureg(n_qubits)
eng.flush()
eng.backend.set_wavefunction(psi0, wavefunction)
ops | wavefunction[0]
eng.flush()
psi = eng.backend.cheat()[1]
All(Measure) | wavefunction
return psi
def __init__(self, node, num, maxQubits=10):
"""
Initialize the simple engine. If no number is given for maxQubits, the assumption will be 10.
"""
super().__init__(node=node, num=num, maxQubits=maxQubits)
# We start with no active qubits
self.activeQubits = 0
self.eng = pQ.MainEngine()
self.qubitReg = []
def test_or():
a = Debugger()
engine_list = [a]
eng = projectq.MainEngine(engine_list=engine_list,
backend=CommandPrinter())
q1 = eng.allocate_qubit()
q2 = eng.allocate_qubit()
ParityMeasurementGate("Z0 X1") | q1 + q2
assert (a.commands[-1].gate._bases[0][0] == 0)
assert (a.commands[-1].gate._bases[0][1] == "Z")
def simulate_chp_files():
# Initialize the Clifford simulator
engine_list = [MultiqubitMeasurementCliffordEngine()]
engine = projectq.MainEngine(engine_list=engine_list)
engine_list[0].next_engine = A()
# the id of the file from the dictionary
file_id = "epr"
file_url = list_of_local_files[file_id]
# load and return the file as list of strings
lines = get_only_chp_instructions(load_local_file(file_url))
# How many qubits does the circuit have?
nrq = get_number_of_qubits(lines)
print("number of qubits in CHP file", nrq)
# Allocate the qubits and initialize them into the Z basis
qubits = []
for qi in range(nrq):
qubit = engine.allocate_qubit()
qubits.append(qubit)
# Transform CHP instructions into ProjectQ commands
simulator_commands = []
for line in lines:
parts_line = line.split(" ")
chp_instr_type = parts_line[0]
#
qb_tuple = (qubits[int(parts_line[1])])
if len(parts_line) == 3:
# cnot has two qubits
qb_tuple = (qubits[int(parts_line[1])], qubits[int(parts_line[2])])
# Dummy value
cmd = None
# Translation between strings and gate types
if chp_instr_type == "h":
projectq.ops.H | qb_tuple
elif chp_instr_type == "p":
projectq.ops.S | qb_tuple
elif chp_instr_type == "m":
projectq.ops.Measure | qb_tuple
elif chp_instr_type == "c":
projectq.ops.CNOT | qb_tuple
print(engine_list[0]._simulator._stabilizers)
engine.flush()
return
def test_parameter_any():
engine_list = restrictedgateset.get_engine_list(one_qubit_gates="any",
two_qubit_gates="any")
backend = DummyEngine(save_commands=True)
eng = projectq.MainEngine(backend, engine_list)
qubit1 = eng.allocate_qubit()
qubit2 = eng.allocate_qubit()
gate = BasicGate()
gate | (qubit1, qubit2)
gate | qubit1
eng.flush()
print(len(backend.received_commands))
assert backend.received_commands[2].gate == gate
assert backend.received_commands[3].gate == gate
def test_multirotation():
commands = GetCommand()
eng = projectq.MainEngine(engine_list=[commands])
qubit1 = eng.allocate_qubit()
qubit2 = eng.allocate_qubit()
gates.CNOT | (qubit1, qubit2)
gates.TimeEvolution(-1, gates.QubitOperator("X0 Z1")) | Qureg(qubit1 + qubit2)
cmd2_info = [[(0,"X"), (1,"Z")], "pi4", 1]
permute_cnot(commands.commands[0], commands.commands[1], cmd2_info)
print(cmd2_info)
assert(len(cmd2_info[0])==2)
assert(cmd2_info[0][0][1] == "Y" and cmd2_info[0][1][1] == "Y")
def reset(self):
"""Reset/initialize the device by initializing the backend and engine, and allocating qubits."""
backend = pq.backends.IBMBackend(num_runs=self.shots,
**self.filter_kwargs_for_backend(
self._kwargs))
token = self._kwargs.get("token", "")
hw = self._kwargs.get("use_hardware", False)
device = self._kwargs.get(
"device", "ibmq_qasm_simulator" if not hw else "ibmqx2")
self._eng = pq.MainEngine(
backend,
verbose=self._kwargs["verbose"],
engine_list=get_engine_list(token=token, device=device),
)
super().reset()
def test_single_rotation2():
commands = GetCommand()
eng = projectq.MainEngine(engine_list=[commands])
qubit1 = eng.allocate_qubit()
qubit2 = eng.allocate_qubit()
gates.CNOT | (qubit1, qubit2)
gates.Rz(1) | qubit2
cmd2_info = [[(0, "Z")], "pi4", 1]
permute_cnot(commands.commands[0], commands.commands[1], cmd2_info)
print(cmd2_info)
assert (len(cmd2_info[0]) == 2)
assert (cmd2_info[0][1][1] == "Z")
def test_MultiqubitMeasurementCliffordEngine(): debugger = A() engine_list = [MultiqubitMeasurementCliffordEngine()] eng = projectq.MainEngine(engine_list=engine_list) engine_list[0].next_engine = debugger qubit1 = eng.allocate_qubit() qubit2 = eng.allocate_qubit() projectq.ops.H | qubit1 projectq.ops.CNOT | (qubit1[0], qubit2[0]) projectq.ops.Measure | qubit1 projectq.ops.Measure | qubit2 eng.flush() print(debugger.commands[2].gate._bases) print(debugger.commands[3].gate._bases) assert(False)
def test_decomposition():
a = Debugger()
decomp = DecompositionRuleSet(
modules=[projectq.setups.decompositions.parity_measurement])
engine_list = [AutoReplacer(decomp), InstructionFilter(is_supported), a]
eng = projectq.MainEngine(engine_list=engine_list,
backend=CommandPrinter(accept_input=False))
q1 = eng.allocate_qubit()
q2 = eng.allocate_qubit()
ParityMeasurementGate("Z0 X1") | q1 + q2
print(a.commands)
#TODO
#assert(a.commands[-1].gate._bases[0][0] == 0)
#assert(a.commands[-1].gate._bases[0][1] == "Z")
assert (False)
def test_simulate_dual_basis_hamiltonian_with_spin_and_potentials(self):
big_eng = projectq.MainEngine()
big_reg = big_eng.allocate_qureg(2 * self.size)
hamiltonian = dual_basis_hamiltonian(1, self.size, spinless=False)
for i in range(2 * self.size):
coefficient = 1. / (i + 1)
if i % 3:
coefficient = -coefficient
hamiltonian += FermionOperator(((i, 1), (i, 0)), coefficient)
# Choose random state.
initial_state = numpy.zeros(2**(2 * self.size), dtype=complex)
for i in range(len(initial_state)):
initial_state[i] = (random.random() *
numpy.exp(1j * 2 * numpy.pi * random.random()))
initial_state /= numpy.linalg.norm(initial_state)
# Put randomly chosen state in the registers.
big_eng.flush()
big_eng.backend.set_wavefunction(initial_state, big_reg)
_low_depth_trotter_simulation.simulate_dual_basis_evolution(
big_reg,
hamiltonian,
trotter_steps=7,
first_order=False,
input_ordering=list(range(7, -1, -1)))
big_eng.flush()
# get_sparse_operator reverses the indices - we've accounted for this
# with the reversed input_ordering.
evol_matrix = expm(-1j * get_sparse_operator(
hamiltonian, n_qubits=2 * self.size)).todense()
initial_state = numpy.matrix(initial_state).T
expected = evol_matrix * initial_state
self.assertTrue(
numpy.allclose(ordered_wavefunction(big_eng),
expected.T,
atol=1e-2),
msg=str(numpy.array(ordered_wavefunction(big_eng) - expected.T)))
projectq.ops.All(projectq.ops.Measure) | big_reg
def test_average_fidelity_on_the_identity_channel():
r"""Test that the average fidelity on the identity channel."""
qubits = 4
dim = 2**qubits
true_answer = (np.abs(np.trace(np.eye(dim))**2) + dim) / (dim**2 + dim)
# Construct the channel
eng = projectq.MainEngine()
register = eng.allocate_qureg(qubits)
eng.flush() # Need to flush it in order to set_wavefunction
def identity(engine, register):
pass
chan_dev = QDeviceChannel(eng, register, identity)
fidelity = chan_dev.estimate_average_fidelity_channel(100, 0.1)
assert np.abs(fidelity - true_answer) < 1e-4
def generate_instructions():
# engines = lattice_surgery.OpenSurgeryExporterEngineList()
engines = lattice_surgery.get_engine_list()
eng = projectq.MainEngine(
backend=OpenSurgeryExporter(output="perceptron_instructions"),
engine_list=engines,
verbose=False)
# Fig2 of arxiv:1811.02266 perceptron
qreg = eng.allocate_qureg(4)
ancilla = eng.allocate_qubit()
# U_i
# currently tensor doesn't work
Tensor(H) | qreg
Tensor(Z) | qreg[:3]
CZ | (qreg[1], qreg[2])
CZ | (qreg[0], qreg[2])
CZ | (qreg[0], qreg[1])
ControlledGate(Z, 2) | (qreg[0], qreg[1], qreg[2])
# U_w
Tensor(Z) | [qreg[1], qreg[2]]
CZ | (qreg[1], qreg[3])
CZ | (qreg[0], qreg[2])
CZ | (qreg[0], qreg[1])
ControlledGate(Z, 2) | (qreg[1], qreg[2], qreg[3])
ControlledGate(Z, 2) | (qreg[0], qreg[1], qreg[3])
ControlledGate(Z, 3) | (qreg[0], qreg[1], qreg[2], qreg[3])
Tensor(H) | qreg
Tensor(X) | qreg
# perform measurement
ControlledGate(X, 4) | (qreg, ancilla)
Measure | ancilla
Tensor(Measure) | qreg
eng.flush()
return
