def teardown_default():
"""
Default cleanup
"""
test.log.info("TEST_TEARDOWN: Recover test enviroment.")
orig_config_xml.sync()
sriov_base.recover_vf(pf_pci, params, 0)
def teardown_max_vfs():
"""
Teardown for max_vfs case
1. Disable VFs
2. Clean up networks
"""
pf_id_list = get_pf_id_list(pf_info, driver)
for pf_pci in pf_id_list:
sriov_base.recover_vf(pf_pci, params, timeout=240)
net_info = get_net_dict(pf_info)
for pf_dev in net_info:
libvirt_network.create_or_del_network(
{"net_name": net_info[pf_dev]}, True)
def setup_max_vfs():
"""
Setup for max_vfs case
1. Check test environment
2. Enable VFs
3. Create networks
"""
if not utils_misc.compare_qemu_version(4, 0, 0, False):
test.cancel("This test is supported from qemu-kvm 4.0.0.")
if len(pf_info) < 2:
test.cancel("This test requires at least 2 PFs.")
pf_id_list = get_pf_id_list(pf_info, driver)
for pf_pci in pf_id_list:
sriov_base.recover_vf(pf_pci, params)
sriov_base.setup_vf(pf_pci, params)
net_info = get_net_dict(pf_info)
for pf_dev, net_name in net_info.items():
create_network(net_name, pf_dev, params)
def run(test, params, env):
"""
Test interfaces attached from network
"""
def test_at_dt():
"""
Test attach-detach interfaces
"""
if not pf_status:
logging.info("Set pf state to down.")
pf_iface_obj = utils_net.Interface(pf_name)
pf_iface_obj.down()
logging.info("Define network - %s.", params.get("net_name"))
create_network(params)
logging.debug("Remove VM's interface devices.")
libvirt_vmxml.remove_vm_devices_by_type(vm, 'interface')
vm.start()
vm_session = vm.wait_for_serial_login(timeout=240)
logging.info("Hotplug an interface to VM.")
iface_dict = {
"model": "virtio",
"source": {
'network': params.get("net_name")
}
}
iface = create_iface(iface_dict)
res = virsh.attach_device(vm_name, iface.xml, debug=True)
libvirt.check_exit_status(res, status_error)
if not pf_status:
logging.info("Set pf state to up then check again.")
pf_iface_obj.up()
virsh.attach_device(vm_name,
iface.xml,
debug=True,
ignore_status=False)
libvirt_vmxml.check_guest_xml(vm.name, params["net_name"])
sriov_base.check_vm_network_accessed(vm_session)
def test_connection():
"""
Test network connections
1. Create a network
2. Attach the interfaces and check network connections
3. Check the network connections after detaching ifaces, restarting
libvirtd and destroying the VM
"""
vf_no = int(params.get("vf_no", "4"))
net_name = params.get("net_name")
iface_type = params.get("iface_type")
logging.info("Define network - %s.", net_name)
create_network(params)
libvirt_vmxml.remove_vm_devices_by_type(vm, 'interface')
libvirt_pcicontr.reset_pci_num(vm_name)
vm.start()
vm.wait_for_serial_login(timeout=240)
logging.info("Attach 4 interfaces to the guest.")
opts = ' '.join(
["network", net_name,
params.get('attach_extra_opts', "")])
for i in range(vf_no):
virsh.attach_interface(vm_name,
option=opts,
debug=True,
ignore_status=False)
libvirt_network.check_network_connection(net_name, i + 1)
logging.info("Try to attach one more interface.")
res = virsh.attach_interface(vm_name, option=opts, debug=True)
libvirt.check_exit_status(res, True)
logging.info("Detach an interface.")
vm_ifaces = [
iface for iface in vm_xml.VMXML.new_from_dumpxml(
vm_name).devices.by_device_tag("interface")
]
mac_addr = vm_ifaces[0].get_mac_address()
opts = ' '.join([iface_type, "--mac %s" % mac_addr])
virsh.detach_interface(vm_name,
option=opts,
debug=True,
wait_for_event=True,
ignore_status=False)
libvirt_network.check_network_connection(net_name, vf_no - 1)
logging.info(
"Restart libvirtd service and check the network connection.")
utils_libvirtd.Libvirtd().restart()
libvirt_network.check_network_connection(net_name, vf_no - 1)
logging.info("Destroy the VM and check the network connection.")
vm.destroy(gracefully=False)
libvirt_network.check_network_connection(net_name, 0)
test_case = params.get("test_case", "")
run_test = eval("test_%s" % test_case)
status_error = "yes" == params.get("status_error", "no")
vm_name = params.get("main_vm", "avocado-vt-vm1")
vm = env.get_vm(vm_name)
pf_pci = utils_sriov.get_pf_pci()
if not pf_pci:
test.cancel("NO available pf found.")
sriov_base.setup_vf(pf_pci, params)
vf_pci = utils_sriov.get_vf_pci_id(pf_pci)
params['vf_iface'] = utils_sriov.get_iface_name(vf_pci)
pf_status = "active" == params.get("pf_status", "active")
pf_name = utils_sriov.get_pf_info_by_pci(pf_pci).get('iface')
params['pf_name'] = pf_name
vmxml = vm_xml.VMXML.new_from_inactive_dumpxml(vm_name)
orig_config_xml = vmxml.copy()
try:
run_test()
finally:
logging.info("Recover test enviroment.")
if not pf_status:
pf_iface_obj = utils_net.Interface(pf_name)
pf_iface_obj.up()
sriov_base.recover_vf(pf_pci, params)
if vm.is_alive():
vm.destroy(gracefully=False)
orig_config_xml.sync()
libvirt_network.create_or_del_network(
{"net_name": params.get("net_name")}, True)
def run(test, params, env):
"""
Nodedev related test.
"""
def check_driver_from_xml(dev_name, driver_type='vfio-pci',
status_error=False):
"""
Check driver of a device from nodedev XML
:param dev_name: Name of a device(eg. pci_0000_05_00_1)
:param driver_type: Type of a device
:param status_error: Whether the driver should be same with 'driver_type'
:raise: TestFail if not match
"""
dev_xml = nodedev_xml.NodedevXML.new_from_dumpxml(dev_name)
if status_error == (dev_xml.driver_name != driver_type):
test.fail("The driver %s should%s be '%s'."
% (dev_xml.driver_name, ' not' if status_error else '',
driver_type))
def nodedev_test(dev_name, status_error=False, no_reset=False):
"""
Execute virsh nodedev-* commands
:param dev_name: Name of a device(eg. pci_0000_05_00_1)
:param status_error: Whether the command should be failed
:param no_reset: Whether reset nodedev
"""
if not no_reset:
res = virsh.nodedev_reset(dev_name, debug=True)
libvirt.check_exit_status(res, status_error)
res = virsh.nodedev_detach(dev_name, debug=True)
libvirt.check_exit_status(res, status_error)
res = virsh.nodedev_reattach(dev_name, debug=True)
libvirt.check_exit_status(res, status_error)
def check_hostdev_device(vm_name):
"""
Check hostdev device from VM's XML
:param vm_name: VM's name
:raise: TestFail if the hoodev device is not found
"""
vmxml = vm_xml.VMXML.new_from_dumpxml(vm_name)
check_hostdev = vm_xml.VMXML.new_from_dumpxml(vm_name)\
.devices.by_device_tag('hostdev')
if not check_hostdev:
test.fail("The hostdev device does not exist: %s."
% check_hostdev)
def check_hostdev_iface(vm_name):
"""
Check hostdev interface in VM
:param vm_name: Name of VM
:raise: TestFail if not found
"""
vm_ifaces = [iface.get_type_name() for iface in vm_xml.VMXML.
new_from_dumpxml(vm_name).devices.
by_device_tag("interface")]
if 'hostdev' not in vm_ifaces:
test.fail("hostdev interface does not exist: %s." % vm_ifaces)
def compare_vf_mac(pf_name, exp_vf_mac):
"""
Compare the current vf's mac address with exp_vf_mac
:param pf_name: The PF's
:param exp_vf_mac: The expected vf's mac address
:raise: TestFail if not match
"""
logging.debug("VF's mac should be %s.", exp_vf_mac)
vf_mac_act = utils_sriov.get_vf_mac(pf_name, is_admin=False)
if exp_vf_mac != vf_mac_act:
test.fail("MAC address changed from '%s' to '%s' after reattaching "
"vf." % (exp_vf_mac, vf_mac_act))
def test_pf():
"""
Reattach/reset/detach a pci device when it is used in guest
1) Detach/Reset/reattach the device
2) Add the device to VM
3) Start the VM
4) Check driver of the device
5) Detach/Reset/reattach the device again
"""
dev_name = utils_sriov.get_device_name(pf_pci)
check_driver_from_xml(dev_name)
nodedev_test(dev_name)
add_hostdev_device(vm_name, pf_pci)
vm.start()
check_hostdev_device(vm_name)
check_driver_from_xml(dev_name, status_error=True)
nodedev_test(dev_name, True)
def test_vf():
"""
Detach/Reattach a vf when it is used in guest
1) Detach/reattach the device
2) Add the device to VM
3) Start the VM
4) Check driver of the device
5) Detach/reattach the device again
"""
logging.info("Initialize the vfs.")
sriov_base.setup_vf(pf_pci, params)
vf_pci = utils_sriov.get_vf_pci_id(pf_pci)
pf_name = utils_sriov.get_pf_info_by_pci(pf_pci).get('iface')
vf_mac = utils_sriov.get_vf_mac(pf_name, is_admin=False)
logging.debug("VF's mac: %s.", vf_mac)
logging.info("Check the vf's driver, it should not be vfio-pci.")
dev_name = utils_sriov.get_device_name(vf_pci)
check_driver_from_xml(dev_name)
logging.info("Detach and reattach the device and check vf's mac.")
nodedev_test(dev_name, no_reset=True)
compare_vf_mac(pf_name, vf_mac)
logging.info("Cold-plug the device into the VM.")
add_hostdev_iface(vm, vf_pci)
vm.start()
check_hostdev_iface(vm.name)
logging.info("Check the device info. It should be vfio-pci.")
check_driver_from_xml(dev_name, status_error=True)
nodedev_test(dev_name, True)
logging.info("Destroy the vm, and check the vf's mac is recovered.")
vm.destroy(gracefully=False)
compare_vf_mac(pf_name, vf_mac)
test_case = params.get("test_case", "")
run_test = eval("test_%s" % test_case)
vm_name = params.get("main_vm", "avocado-vt-vm1")
vm = env.get_vm(vm_name)
pf_pci = utils_sriov.get_pf_pci()
if not pf_pci:
test.cancel("NO available pf found.")
vmxml = vm_xml.VMXML.new_from_inactive_dumpxml(vm_name)
orig_config_xml = vmxml.copy()
try:
run_test()
finally:
logging.info("Recover test environment.")
if vm.is_alive():
vm.destroy(gracefully=False)
orig_config_xml.sync()
sriov_base.recover_vf(pf_pci, params)
def run(test, params, env):
"""
SR-IOV: managed related test.
"""
def start_vm(vm, test_login=False, destroy_vm=False):
"""
Start up VM
:param vm: The vm object
:param test_login: Whether to login VM
:param destroy_vm: Whether to destroy VM
"""
if vm.is_alive():
vm.destroy()
vm.start()
if test_login:
vm.wait_for_serial_login(timeout=180).close()
if destroy_vm:
vm.destroy()
def create_vf_pool():
"""
Create VF pool
"""
net_hostdev_dict = {
"net_name": params.get("net_name"),
"net_forward": params.get("net_forward"),
"vf_list_attrs": "[%s]" % utils_sriov.pci_to_addr(vf_pci)
}
libvirt_network.create_or_del_network(net_hostdev_dict)
def check_vm_iface_managed(vm_name, iface_dict):
"""
Check 'managed' in VM's iface
:param vm_name: Name of VM
:param iface_dict: The parameters dict
:raise: TestFail if not match
"""
vm_iface_managed = [
iface.get("managed") for iface in vm_xml.VMXML.new_from_dumpxml(
vm_name).devices.by_device_tag("interface")
][0]
expr_managed = "yes" if iface_dict.get("managed",
"") == "yes" else None
if vm_iface_managed != expr_managed:
test.fail("Unable to get the expected managed! Actual: %s, "
"Expected: %s." % (vm_iface_managed, expr_managed))
def test_networks():
"""
Start vm with VF from VF Pool with "managed=no" or default setting
1) Create VF pool
2) Prepare device xml and hot-plug to the guest
3) Detach the device from host
4) Check the driver of device
5) Start VM
6) Destroy vm then check the driver
7) Reattach the device to the host and check the driver
"""
create_vf_pool()
libvirt_vfio.check_vfio_pci(vf_pci, status_error=True)
iface_dict = {
"type": "network",
"source": "{'network': '%s'}" % params.get("net_name")
}
libvirt.modify_vm_iface(vm.name, "update_iface", iface_dict)
res = virsh.start(vm.name, debug=True)
libvirt.check_exit_status(res, True)
virsh.nodedev_detach(dev_name, debug=True, ignore_status=False)
libvirt_vfio.check_vfio_pci(vf_pci)
start_vm(vm, True, True)
libvirt_vfio.check_vfio_pci(vf_pci)
virsh.nodedev_reattach(dev_name, debug=True, ignore_status=False)
libvirt_vfio.check_vfio_pci(vf_pci, status_error=True)
def test_device_hotplug():
"""
Hotplug/unplug VF with managed='no'
1) Prepare a running guest
2) Check the driver of vf on host
3) Prepare a xml with "managed=no"and attach to guest
4) Detach the device from host
5) Check the driver of vf on host
6) Attach the device to guest
7) Check the interface of the guest
8) Detach the device from guest and check the driver
9) Reattach the device to the host and check the driver
"""
libvirt_vmxml.remove_vm_devices_by_type(vm, 'interface')
start_vm(vm)
libvirt_vfio.check_vfio_pci(vf_pci, status_error=True)
mac_addr = utils_net.generate_mac_address_simple()
iface_dict = eval(
params.get('iface_dict', '{"hostdev_addr": "%s"}') %
utils_sriov.pci_to_addr(vf_pci))
iface = interface.Interface("hostdev")
iface.xml = libvirt.modify_vm_iface(vm.name, "get_xml", iface_dict)
res = virsh.attach_device(vm_name, iface.xml, debug=True)
libvirt.check_exit_status(res, True)
virsh.nodedev_detach(dev_name, debug=True, ignore_status=False)
libvirt_vfio.check_vfio_pci(vf_pci)
virsh.attach_device(vm_name,
iface.xml,
debug=True,
ignore_status=False)
check_vm_iface_managed(vm_name, iface_dict)
vm.wait_for_serial_login().close()
virsh.detach_device(vm_name,
iface.xml,
wait_remove_event=True,
debug=True,
ignore_status=False)
libvirt_vfio.check_vfio_pci(vf_pci)
virsh.nodedev_reattach(dev_name, debug=True, ignore_status=False)
libvirt_vfio.check_vfio_pci(vf_pci, status_error=True)
test_case = params.get("test_case", "")
run_test = eval("test_%s" % test_case)
vm_name = params.get("main_vm", "avocado-vt-vm1")
vm = env.get_vm(vm_name)
pf_pci = utils_sriov.get_pf_pci()
if not pf_pci:
test.cancel("NO available pf found.")
default_vf = sriov_base.setup_vf(pf_pci, params)
vf_pci = utils_sriov.get_vf_pci_id(pf_pci)
dev_name = utils_sriov.get_device_name(vf_pci)
vmxml = vm_xml.VMXML.new_from_inactive_dumpxml(vm_name)
orig_config_xml = vmxml.copy()
try:
run_test()
finally:
logging.info("Recover test enviroment.")
sriov_base.recover_vf(pf_pci, params, default_vf)
if vm.is_alive():
vm.destroy(gracefully=False)
orig_config_xml.sync()
libvirt_network.create_or_del_network(
{"net_name": params.get("net_name")}, True)
virsh.nodedev_reattach(dev_name, debug=True)
def run(test, params, env):
"""
Test when the PCI configuration file is in read-only mode
"""
def test_vf_hotplug():
"""
Hot-plug VF to VM
"""
logging.info("Preparing a running guest...")
libvirt_vmxml.remove_vm_devices_by_type(vm, 'interface')
vm.start()
vm_session = vm.wait_for_serial_login(timeout=180)
logging.info("Attaching VF to the guest...")
mac_addr = utils_net.generate_mac_address_simple()
iface_dict = eval(
params.get('iface_dict', '{"hostdev_addr": "%s"}') %
utils_sriov.pci_to_addr(vf_pci))
iface = interface.Interface("hostdev")
iface.xml = libvirt.modify_vm_iface(vm.name, "get_xml", iface_dict)
virsh.attach_device(vm_name,
iface.xml,
debug=True,
ignore_status=False)
logging.info("Checking VF in the guest...")
vm_iface_types = [
iface.get_type_name() for iface in vm_xml.VMXML.new_from_dumpxml(
vm_name).devices.by_device_tag("interface")
]
if 'hostdev' not in vm_iface_types:
test.fail('Unable to get hostdev interface!')
if cmd_in_vm:
if not utils_misc.wait_for(
lambda: not vm_session.cmd_status(cmd_in_vm), 30, 10):
test.fail("Can not get the Virtual Function info on vm!")
vm_session.close()
libvirt_version.is_libvirt_feature_supported(params)
test_case = params.get("test_case", "")
run_test = eval("test_%s" % test_case)
cmd_in_vm = params.get("cmd_in_vm")
vm_name = params.get("main_vm", "avocado-vt-vm1")
vm = env.get_vm(vm_name)
pf_pci = utils_sriov.get_pf_pci()
if not pf_pci:
test.cancel("NO available pf found.")
default_vf = sriov_base.setup_vf(pf_pci, params)
vf_pci = utils_sriov.get_vf_pci_id(pf_pci)
dev_name = utils_sriov.get_device_name(vf_pci)
vmxml = vm_xml.VMXML.new_from_inactive_dumpxml(vm_name)
orig_config_xml = vmxml.copy()
libvirtd = utils_libvirtd.Libvirtd('virtqemud')
try:
virsh.nodedev_detach(dev_name, debug=True, ignore_status=False)
logging.info("Re-mounting sysfs with ro mode...")
utils_misc.mount('/sys', '', None, 'remount,ro')
libvirtd.restart()
run_test()
finally:
logging.info("Recover test enviroment.")
utils_misc.mount('/sys', '', None, 'remount,rw')
sriov_base.recover_vf(pf_pci, params, default_vf)
if vm.is_alive():
vm.destroy(gracefully=False)
orig_config_xml.sync()
virsh.nodedev_reattach(dev_name, debug=True)
def teardown_hostdev():
"""
Cleanup VF setting for hostdev test
"""
sriov_base.recover_vf(utils_sriov.get_pf_pci(), params, 0)
