def optimization (s):
with Server (cmd) as g, Server (alt) as h:
# Change the salts to discard memoized results (or delete
# ./cache.d):
g = Memoize (g, DirStore (salt=cmd + "TESTING1 Sep14"))
h = Memoize (h, DirStore (salt=alt + "TESTING1 Sep14"))
# A Func of cartesian coordinates, stretching and bending
# parameters as tuples. Parameters not hashed, beware of
# memoization of this term!:
if uo2 is not None:
g = g + uo2
g = compose (g, trafo) # MM self-energy
h = compose (h, trafo) # RISM solvation energy
def opt (e, s, name, **kwargs):
print ("XXX: " + name + "...")
print (name + ": e(0)=", e (s) / kcal, "kcal, |g|=", max (abs (e.fprime (s))) / kcal, "kcal/Unit")
s, info = minimize (e, s, **kwargs)
print (name + ": converged =", info["converged"], "in", info["iterations"], "iterations")
write_xyz (name + ".xyz", trafo (s))
# print info
if "trajectory" in info:
traj = info["trajectory"]
print (map(e, traj))
for i, si in enumerate (traj):
# write_xyz ("traj-%s-%03d.xyz" % (name, i), trafo (si))
pass
return s, info
# MM self-energy:
with g as e:
s0, info = opt (e, s, "MM", algo=1, maxstep=0.1, maxit=200, ftol=5.0e-3, xtol=5.0e-3)
print ("XXX: MM", e (s), "eV", e (s) / kcal, "kcal", info["converged"])
exit (0)
# MM self-energy with RISM solvation:
with g + h as e:
s1, info = opt (e, (s if NW == 4 else s0), "MM+RISM", algo=1, maxstep=0.1, maxit=200, ftol=5.0e-3, xtol=5.0e-3)
print ("XXX: MM+RISM", e (s), "eV", e (s) / kcal, "kcal", info["converged"])
# This prints a table of various functionals applied to several
# geometries:
ss = [s0, s1]
with g + h as e:
for s in ss:
print ("MM=", g (s) / kcal, "RISM=", h (s) / kcal, "MM+RISM=", e (s) / kcal, "(kcal)")
def vibmodes(atoms,
startdir=None,
mask=None,
workhere=False,
save=None,
give_output=0,
pmap=pmap3,
**kwargs):
"""
Wrapper around vibmode, which used the atoms objects
The hessian is calculated by derivatef
qfunc.fwrapper is used as a wrapper to calulate the gradients
"""
from pts.memoize import Memoize, DirStore
coord = atoms.get_positions()
if mask == None:
mask = constraints2mask(atoms)
if mask == None: # (if still None)
fun = Cartesian()
else:
fun = Masked(Cartesian(), mask, coord.flatten())
xcenter = fun.pinv(coord)
myfunc = QFunc(atoms, atoms.get_calculator())
myfunc = Memoize(myfunc, DirStore("cache.d"))
myfunc = compose(myfunc, fun)
pmapc = pwrapper(pmap)
func = fwrapper(myfunc, startdir=startdir, mask=mask, workhere=workhere)
# the derivatives are needed
hessian = derivatef(func, xcenter, pmap=pmapc, **kwargs)
# save is assumend to be a filename, so far only the hessian is saved:
if save is not None:
savetxt(save, hessian)
mass = mass_matrix(atoms.get_masses(), mask)
freqs, modes = vibmod(mass, hessian)
# the output will be printed on demand, with modes if wanted
# the output for the freqs can easily be recreated later on, but
# for the mode vectors the mass (not included in the direct output_
# is needed
if VERBOSE or give_output == 2:
output(freqs, modes, mass, mask)
elif give_output == 1:
output(freqs)
return freqs, modes
def test_uranyl():
e = compose(uo2, uranyl)
e = Memoize(e, DirStore(salt="XXX YYY"))
# s = array ([1.79, 1.79, pi])
s = zeros(6) # + 0.1
print(uranyl(s))
# print (e(s))
# exit (0)
sm, info = minimize(e, s, ftol=1.0e-2, xtol=1.0e-2, algo=1)
print(uranyl(sm))
print("e(0)=", e(s), "e(1)=", e(sm), "iterations=", info["iterations"])
def test_uranyl ():
e = compose (uo2, uranyl)
e = Memoize (e, DirStore (salt="XXX YYY"))
# s = array ([1.79, 1.79, pi])
s = zeros (6) # + 0.1
print (uranyl (s))
# print (e(s))
# exit (0)
sm, info = minimize (e, s, ftol=1.0e-2, xtol=1.0e-2, algo=1)
print (uranyl (sm))
print ("e(0)=", e (s), "e(1)=", e(sm), "iterations=", info["iterations"])
def vibmodes(atoms, startdir=None, mask=None, workhere=False, save=None, give_output = 0, pmap = pmap3, **kwargs):
"""
Wrapper around vibmode, which used the atoms objects
The hessian is calculated by derivatef
qfunc.fwrapper is used as a wrapper to calulate the gradients
"""
from pts.memoize import Memoize, DirStore
coord = atoms.get_positions()
if mask == None:
mask = constraints2mask(atoms)
if mask == None: # (if still None)
fun = Cartesian()
else:
fun = Masked(Cartesian(), mask, coord.flatten())
xcenter = fun.pinv(coord)
myfunc = QFunc(atoms, atoms.get_calculator())
myfunc = Memoize(myfunc, DirStore("cache.d"))
myfunc = compose( myfunc, fun)
pmapc = pwrapper(pmap)
func = fwrapper(myfunc, startdir = startdir, mask = mask, workhere = workhere)
# the derivatives are needed
hessian = derivatef( func, xcenter, pmap = pmapc, **kwargs)
# save is assumend to be a filename, so far only the hessian is saved:
if save is not None:
savetxt(save, hessian)
mass = mass_matrix (atoms.get_masses(), mask)
freqs, modes = vibmod(mass, hessian)
# the output will be printed on demand, with modes if wanted
# the output for the freqs can easily be recreated later on, but
# for the mode vectors the mass (not included in the direct output_
# is needed
if VERBOSE or give_output == 2:
output(freqs, modes, mass, mask)
elif give_output == 1:
output(freqs)
return freqs, modes
def exchange(s):
# Functions of cartesian coordinates:
ra = Distance([0, 3])
rb = Distance([0, 18])
# rc = Difference (ra, rb)
rc = ra
f0 = Server(cmd)
h0 = Server(alt)
F0 = QFunc(atoms, ParaGauss(cmdline=qmd, input="6w,c1.scm"))
with f0 as f0, h0 as h0, F0 as F0:
f1 = Memoize(f0, DirStore(salt=cmd + "TESTING"))
h1 = Memoize(h0, DirStore(salt=alt + "TESTING"))
F1 = Memoize(F0, DirStore(salt=qmd + "XXX4 50/291"))
# A Func of cartesian coordinates, stretching and bending
# parameters as tuples. Parameters not hashed, beware of
# memoization of this term!:
if uo2 is not None:
f1 = f1 + uo2
f = compose(f1, trafo)
h = compose(h1, trafo)
c = compose(rc, trafo)
F = compose(F1, trafo)
B = compose(bias, trafo)
refine = True
if False:
ss = loadtxt("ss,initial.txt")
qs = array(map(c, ss))
print("qs=", qs)
print("dq=", qs[1:] - qs[:-1])
if False:
P = Path(ss, qs)
C = compose(c, P)
print("q=", qs)
def solve(q):
x = q
while abs(C(x) - q) > 1.0e-10:
f, fprime = C.taylor(x)
df = f - q
x = x - df / fprime
return x
xs = []
for q in linspace(qs[0], qs[-1], 21):
x = solve(q)
print("x=", x, "C(x)=", C(x), "q=", q)
xs.append(x)
ss = array(map(P, xs))
qs = array(map(c, ss))
print("qs=", qs)
print("dq=", qs[1:] - qs[:-1])
p = Path(ss, qs)
if False:
qs, ss = initial_path(f + B, s, c)
savetxt("ss-initial.txt", ss)
p = Path(ss, qs)
if False:
for i, q in enumerate(qs):
write_xyz("in-%03d.xyz" % i, trafo(p(q)))
if False:
# Energy profile, smooth:
with open("profile-initial.txt", "w") as file:
print("# q, ra(q), rb(q), E(q), E_qm(q), B(q)", file=file)
for q in linspace(qs[0], qs[-1], 100):
print(q,
ra(trafo(p(q))),
rb(trafo(p(q))),
f(p(q)),
B(p(q)),
file=file)
if False:
# Energy profile, coarse, with dG(q):
with open("./profile,intial.txt", "w") as file:
print("# q, ra(q), rb(q), F(q)", file=file)
# print ("# q, ra(q), rb(q), E(q), dG(q), F(q)", file=file)
for q in qs:
print(q,
ra(trafo(p(q))),
rb(trafo(p(q))),
F(p(q)),
file=file)
# print (q, ra (trafo (p(q))), rb (trafo (p (q))), f(p(q)), h(p(q)), F(p(q)), file=file)
# with f + h as e:
with F + h + B as e:
print("XXX")
if False:
p1 = Path(loadtxt("sxy.txt", ndmin=2))
c1 = compose(c, p1)
q1 = linspace(0., 1., 21)
for i, q in enumerate(q1):
write_xyz("interp-%03d.xyz" % i, trafo(p1(q)))
print("c=", [c1(q) for q in q1])
Q1 = Inverse(c1)
q2 = [Q1(c_) for c_ in [3.05]]
print("q=", q2, "c=", [c1(q) for q in q2])
s2 = array([p1(q) for q in q2])
savetxt("sxy1.txt", s2)
exit(0)
def opt(s):
sm, info = minimize(e,
s,
maxit=50,
ftol=1.0e-2,
xtol=1.0e-2,
algo=1)
print("converged=", info["converged"], "in",
info["iterations"])
return sm
if True:
# Unconstrained termnals:
sab = loadtxt("sab,initial.txt", ndmin=2)
# sab = (ss[0], ss[-1])
print("before: q=", map(c, sab))
sab = map(opt, sab)
print("after: q=", map(c, sab))
savetxt("sab.txt", sab)
for i, s in enumerate(sab):
write_xyz("min-%03d.xyz" % i, trafo(s))
exit(0)
def copt(s, maxit):
sm, info = cminimize(e,
s,
Array(c),
maxit=maxit,
ftol=1.0e-3,
xtol=1.0e-3,
algo=0)
print("converged=", info["converged"], "in",
info["iterations"])
return sm
maxit = [30] * len(ss)
ss = array(map(copt, ss, maxit))
savetxt("ss.txt", ss)
# Energy profile:
with open("./profile,rs.txt", "w") as file:
print("# Optimized profile:", file=file)
# print (qa, f(sa), h(sa), e(sa), file=file)
for q, s in zip(qs, ss):
print(q, f(s), h(s), e(s), file=file)
# print (qb, f(sb), h(sb), e(sb), file=file)
for i, s in enumerate(ss):
write_xyz("KH-%03d.xyz" % i, trafo(s))
if False:
p = Path(ss, qs)
with open("./profile,rs,interp.txt", "w") as file:
print("# Interpolated profile:", file=file)
for q in linspace(qs[0], qs[-1], 3 * len(qs)):
print(q, f(p(q)), h(p(q)), e(p(q)), file=file)
def optimization(s):
with Server(cmd) as g, Server(alt) as h:
# Change the salts to discard memoized results (or delete
# ./cache.d):
g = Memoize(g, DirStore(salt=cmd + "TESTING1 Sep14"))
h = Memoize(h, DirStore(salt=alt + "TESTING1 Sep14"))
# A Func of cartesian coordinates, stretching and bending
# parameters as tuples. Parameters not hashed, beware of
# memoization of this term!:
if uo2 is not None:
g = g + uo2
g = compose(g, trafo) # MM self-energy
h = compose(h, trafo) # RISM solvation energy
def opt(e, s, name, **kwargs):
print("XXX: " + name + "...")
print(name + ": e(0)=",
e(s) / kcal, "kcal, |g|=",
max(abs(e.fprime(s))) / kcal, "kcal/Unit")
s, info = minimize(e, s, **kwargs)
print(name + ": converged =", info["converged"], "in",
info["iterations"], "iterations")
write_xyz(name + ".xyz", trafo(s))
# print info
if "trajectory" in info:
traj = info["trajectory"]
print(map(e, traj))
for i, si in enumerate(traj):
# write_xyz ("traj-%s-%03d.xyz" % (name, i), trafo (si))
pass
return s, info
# MM self-energy:
with g as e:
s0, info = opt(e,
s,
"MM",
algo=1,
maxstep=0.1,
maxit=200,
ftol=5.0e-3,
xtol=5.0e-3)
print("XXX: MM", e(s), "eV",
e(s) / kcal, "kcal", info["converged"])
exit(0)
# MM self-energy with RISM solvation:
with g + h as e:
s1, info = opt(e, (s if NW == 4 else s0),
"MM+RISM",
algo=1,
maxstep=0.1,
maxit=200,
ftol=5.0e-3,
xtol=5.0e-3)
print("XXX: MM+RISM", e(s), "eV",
e(s) / kcal, "kcal", info["converged"])
# This prints a table of various functionals applied to several
# geometries:
ss = [s0, s1]
with g + h as e:
for s in ss:
print("MM=",
g(s) / kcal, "RISM=",
h(s) / kcal, "MM+RISM=",
e(s) / kcal, "(kcal)")
#
zmt = ZMat ([(None, None, None),
(1, None, None),
(1, 2, None)], base=1)
#
# Initial values of internal coordinates:
#
s = zmt.pinv (x)
assert max (abs (s - zmt.pinv (zmt (s)))) < 1.0e-10
clean ()
with QFunc (atoms, calc) as f:
f = Memoize (f, DirStore (salt="h2o, qm"))
e = compose (f, zmt)
print s, e (s)
s, info = minimize (e, s, algo=1, ftol=1.0e-2, xtol=1.0e-2)
print s, e (s), info["converged"]
#
# Internal coordinates:
#
# In: 0.97843364 0.97826543 1.87152024
# Out: 0.98477091 0.98477695 1.88111918
#
# Rigid water with optimized internal coordinates:
#
X = Rigid (zmt (s))
def pathsearcher(atoms, init_path, trafo, **kwargs):
"""
MUSTDIE: from python code use a PES method find_path(pes, path,
...), for command line there is call_with_pes(find_path,
sys.argv[1:]) See call_with_pes() and find_path()
instead.
Only used in ./tests.
It is possible to use the pathsearcher() function in a python
script. It looks like:
from pts.inputs import pathsearcher
pathsearcher(atoms, init_path, trafo, **kwargs)
* atoms is an ASE atoms object used to calculate the forces and
energies of a given (Cartesian) geometry. Be aware that it needs
to have an calculator attached to it, which will do the actual
transformation. Another possibility is to give the calculator
separately as an option.
* init_path is an array containting for each bead of the starting
path the internal coordinates.
* trafo is a Func to transform internal to Cartesian coordinates.
* the other parameters give the possibility to overwrite some of
the default behaviour of the module, They are provided as kwargs
in here. For a list of them see defaults.py They can be also
specified in an input file given as paramfile.
"""
# most parameters are stored in a dictionary, default parameters are stored in
# defaults.py
para_dict = create_params_dict(kwargs)
# calculator from kwargs, if valid, has precedence over
if "calculator" in para_dict:
# the associated (or not) with the atoms:
if para_dict["calculator"] is not None:
atoms.set_calculator(para_dict["calculator"])
# calculator is not used below:
del para_dict["calculator"]
# print parameters to STDOUT:
tell_params(para_dict)
#
# PES to be used for energy, forces. FIXME: maybe adapt QFunc not
# to default to LJ, but rather keep atoms as is?
#
pes = QFunc(atoms, atoms.get_calculator())
#
# Memoize early, PES as a function of cartesian coordiantes is the
# lowest denominator. The cache store used here should allow
# concurrent writes and reads from multiple processes eventually
# running on different nodes --- DirStore() keeps everything in a
# dedicated directory on disk or on an NFS share:
#
pes = Memoize(pes, DirStore("cache.d"))
#
# PES as a funciton of optimization variables, such as internal
# coordinates:
#
pes = compose(pes, trafo)
# This parallel mapping function puts every single point calculation in
# its own subfolder
strat = Strategy(para_dict["cpu_architecture"], para_dict["pmin"], para_dict["pmax"])
del para_dict["cpu_architecture"]
del para_dict["pmin"]
del para_dict["pmax"]
if "pmap" not in para_dict:
para_dict["pmap"] = PMap3(strat=strat)
para_dict["trafo"] = trafo
para_dict["symbols"] = atoms.get_chemical_symbols()
# this operates with PES in internals:
convergence, optimized_path = find_path(pes, init_path, **para_dict)
# print user-friendly output, including cartesian geometries:
output(optimized_path, trafo, para_dict["output_level"], para_dict["output_geo_format"], atoms)
return convergence, optimized_path
def call_with_pes(method, args):
"""
Interprete command line args and call a method() with PES and
other input constructed according to the command line. A method
should have an interface as
method(pes, geometries, **kw)
Return value(s) of the method are passed up the caller chain. Most
path searcher algorithms can be made to fit this interface.
For use in scripts. Note that args is a list of strings from
sys.args.
To invoke a method(pes, path, **rest) do this:
from pts.path_searcher import call_with_pes
results = call_with_pes(method, sys.argv[1:])
The rest is a slightly misplaced doc copied from a more
specialized code:
* atoms is an ASE atoms object used to calculate the forces and
energies of a given (Cartesian) geometry. Be aware that it needs
to have an calculator attached to it, which will do the actual
transformation. Another possibility is to give a file in which
calculator is specified separately as parameter. (FIXME: this
another possibility is vaguely specified)
* geometries is an array containting for each bead of the starting
path the internal coordinates.
* trafo is a Func to transform internal to Cartesian coordinates.
* the other parameters give the possibility to overwrite some of
the default behaviour of the module, They are provided as kwargs
in here. For a list of them see defaults.py They can be also
specified in an input file given as paramfile.
"""
# this interpretes the command line:
atoms, geometries, trafo, kwargs = interprete_input(args)
# most parameters are stored in a dictionary, default parameters
# are stored in defaults.py
kw = create_params_dict(kwargs)
# calculator from kwargs, if valid, has precedence over
if "calculator" in kw:
# the associated (or not) with the atoms:
if kw["calculator"] is not None:
atoms.set_calculator(kw["calculator"])
# calculator is not used below:
del kw["calculator"]
#
# Print parameters to STDOUT. This was a habit when doing path
# searcher calculations. So for backwards compatibility do it in
# this case, but only in this case (unless a yet non-existent
# command line option requires that explicitly):
#
if method is pes_method:
tell_params(kw)
#
# PES to be used for energy, forces. FIXME: maybe adapt QFunc not
# to default to LJ, but rather keep atoms as is?
#
pes = QFunc(atoms, atoms.get_calculator())
#
# Memoize early, PES as a function of cartesian coordiantes is the
# lowest denominator. The cache store used here should allow
# concurrent writes and reads from multiple processes eventually
# running on different nodes --- DirStore() keeps everything in a
# dedicated directory on disk or on an NFS share:
#
pes = Memoize(pes, DirStore("cache.d"))
#
# PES as a funciton of optimization variables, such as internal
# coordinates:
#
pes = compose(pes, trafo)
# This parallel mapping function puts every single point calculation in
# its own subfolder
if "pmap" not in kw:
strat = Strategy(kw["cpu_architecture"], kw["pmin"], kw["pmax"])
kw["pmap"] = PMap3(strat=strat)
del kw["cpu_architecture"]
del kw["pmin"]
del kw["pmax"]
# some methds think they need to know atomic details of the PES:
kw["atoms"] = atoms
kw["trafo"] = trafo
kw["symbols"] = atoms.get_chemical_symbols()
# this operates with PES in internal variables:
return method(pes, geometries, **kw)
def exchange (s):
# Functions of cartesian coordinates:
ra = Distance ([0, 3])
rb = Distance ([0, 18])
# rc = Difference (ra, rb)
rc = ra
f0 = Server (cmd)
h0 = Server (alt)
F0 = QFunc (atoms, ParaGauss (cmdline=qmd, input="6w,c1.scm"))
with f0 as f0, h0 as h0, F0 as F0:
f1 = Memoize (f0, DirStore (salt=cmd + "TESTING"))
h1 = Memoize (h0, DirStore (salt=alt + "TESTING"))
F1 = Memoize (F0, DirStore (salt=qmd + "XXX4 50/291"))
# A Func of cartesian coordinates, stretching and bending
# parameters as tuples. Parameters not hashed, beware of
# memoization of this term!:
if uo2 is not None:
f1 = f1 + uo2
f = compose (f1, trafo)
h = compose (h1, trafo)
c = compose (rc, trafo)
F = compose (F1, trafo)
B = compose (bias, trafo)
refine = True
if False:
ss = loadtxt ("ss,initial.txt")
qs = array (map (c, ss))
print ("qs=", qs)
print ("dq=", qs[1:] - qs[:-1])
if False:
P = Path (ss, qs)
C = compose (c, P)
print ("q=", qs)
def solve (q):
x = q
while abs (C(x) - q) > 1.0e-10:
f, fprime = C.taylor (x)
df = f - q
x = x - df / fprime
return x
xs = []
for q in linspace (qs[0], qs[-1], 21):
x = solve (q)
print ("x=", x, "C(x)=", C(x), "q=", q)
xs.append (x)
ss = array (map (P, xs))
qs = array (map (c, ss))
print ("qs=", qs)
print ("dq=", qs[1:] - qs[:-1])
p = Path (ss, qs)
if False:
qs, ss = initial_path(f + B, s, c)
savetxt ("ss-initial.txt", ss)
p = Path (ss, qs)
if False:
for i, q in enumerate (qs):
write_xyz ("in-%03d.xyz" % i, trafo (p (q)))
if False:
# Energy profile, smooth:
with open ("profile-initial.txt", "w") as file:
print ("# q, ra(q), rb(q), E(q), E_qm(q), B(q)", file=file)
for q in linspace (qs[0], qs[-1], 100):
print (q, ra (trafo (p(q))), rb (trafo (p (q))), f(p(q)), B (p(q)), file=file)
if False:
# Energy profile, coarse, with dG(q):
with open ("./profile,intial.txt", "w") as file:
print ("# q, ra(q), rb(q), F(q)", file=file)
# print ("# q, ra(q), rb(q), E(q), dG(q), F(q)", file=file)
for q in qs:
print (q, ra (trafo (p(q))), rb (trafo (p (q))), F(p(q)), file=file)
# print (q, ra (trafo (p(q))), rb (trafo (p (q))), f(p(q)), h(p(q)), F(p(q)), file=file)
# with f + h as e:
with F + h + B as e:
print ("XXX")
if False:
p1 = Path (loadtxt ("sxy.txt", ndmin=2))
c1 = compose (c, p1)
q1 = linspace (0., 1., 21)
for i, q in enumerate (q1):
write_xyz ("interp-%03d.xyz" % i, trafo (p1 (q)))
print ("c=", [c1(q) for q in q1])
Q1 = Inverse (c1)
q2 = [Q1(c_) for c_ in [3.05]]
print ("q=", q2, "c=", [c1(q) for q in q2])
s2 = array ([p1(q) for q in q2])
savetxt ("sxy1.txt", s2)
exit (0)
def opt (s):
sm, info = minimize (e, s, maxit=50, ftol=1.0e-2, xtol=1.0e-2, algo=1)
print ("converged=", info["converged"], "in", info["iterations"])
return sm
if True:
# Unconstrained termnals:
sab = loadtxt ("sab,initial.txt", ndmin=2)
# sab = (ss[0], ss[-1])
print ("before: q=", map (c, sab))
sab = map (opt, sab)
print ("after: q=", map (c, sab))
savetxt ("sab.txt", sab)
for i, s in enumerate (sab):
write_xyz ("min-%03d.xyz" % i, trafo (s))
exit (0)
def copt (s, maxit):
sm, info = cminimize (e, s, Array (c), maxit=maxit, ftol=1.0e-3, xtol=1.0e-3, algo=0)
print ("converged=", info["converged"], "in", info["iterations"])
return sm
maxit = [30] * len (ss)
ss = array (map (copt, ss, maxit))
savetxt ("ss.txt", ss)
# Energy profile:
with open ("./profile,rs.txt", "w") as file:
print ("# Optimized profile:", file=file)
# print (qa, f(sa), h(sa), e(sa), file=file)
for q, s in zip (qs, ss):
print (q, f(s), h(s), e(s), file=file)
# print (qb, f(sb), h(sb), e(sb), file=file)
for i, s in enumerate (ss):
write_xyz ("KH-%03d.xyz" % i, trafo (s))
if False:
p = Path (ss, qs)
with open ("./profile,rs,interp.txt", "w") as file:
print ("# Interpolated profile:", file=file)
for q in linspace (qs[0], qs[-1], 3 * len (qs)):
print (q, f(p(q)), h(p(q)), e(p(q)), file=file)
def read_dimer_input(rest, name):
"""
This function is similar to the one for pathsearcher
"""
from pts.ui.read_inputs import from_params_file
from pts.ui.read_COS import geo_params
from pts.defaults import are_strings
from pts.common import file2str
from pts.func import compose
from pts.qfunc import QFunc
from pts.memoize import Memoize, FileStore
from pts.defaults import di_default_params, qn_default_params, ln_default_params
from pts.trajectories import dimer_log
from pts.defaults import di_default_params, qn_default_params, di_default_params_rot
#This variables will be needed afterwards anyway
# independent of beeing given by user
geo_dict = {"format": None, "zmt_format": "direct"}
add_param = {}
paramfile = None
zmatrix = []
geo = None
mode = None
as_pickle = False
ts_estim = None
accept_all = False
give_help_if_needed(rest, name)
if rest[0] == "--accept_all":
rest = rest[1:]
accept_all = True
defaults_available = True
if name in ["dimer"]:
default_params = di_default_params
elif name in ["lanczos"]:
default_params = ln_default_params
elif name in ["lanczos-rotate", "dimer-rotate"]:
default_params = di_default_params_rot
elif name in ["qn", "simple_qn", "quasi-newton"]:
default_params = qn_default_params
else:
print >> stderr, "WARNING: No default parameter for specific method found"
print >> stderr, " There will be no test if the given parameter make sense"
default_params = {}
accept_all = True
defaults_available = False
if "--defaults" in rest:
if defaults_available:
print "The default parameters for the algorithm ", name, " are:"
for param, value in default_params.iteritems():
print " %s = %s" % (str(param), str(value))
else:
print "No default values available for the specific method", name
exit()
for i in range(len(rest)):
if rest == []:
break
# filter out all the options
if rest[0].startswith("--"):
o = rest[0][2:]
a = rest[1]
# filter out the special ones
if o == "paramfile":
# file containing parameters
paramfile = file2str(a)
elif o in ("zmatrix"):
# zmatrix if given separate to the geometries
zmatrix.append(a)
elif o in ("pickle"):
as_pickle = True
ts_estim = a
elif o in geo_params:
# only needed to build up the geometry
if o in ("mask"):
# needed to build up the geometry and wanted for params output
geo_dict[o] = get_mask(a)
elif o in ("cell", "pbc"):
geo_dict[o] = eval(a)
else:
geo_dict[o] = a
else:
# suppose that the rest are setting parameters
# we do not have a complete list of them
if not accept_all:
assert o in default_params or o == "rot_method", "Parameter %s" % (
o)
if o in are_strings:
add_param[o] = a
else:
add_param[o] = eval(a)
rest = rest[2:]
else:
# This two files are needed any way: one geometry file and one
# for the modevector, expect the geoemtry file to be given first
if geo == None:
# For reusing pathsearcher routines with several geoemtries for input
geo = [rest[0]]
else:
mode = rest[0]
rest = rest[1:]
if paramfile == None:
params_dict = add_param
geo_dict_dim = geo_dict
else:
if accept_all:
params_dict, geo_dict_dim = from_params_file_dimer(paramfile)
else:
params_dict, geo_dict_dim = from_params_file(
paramfile, default_params)
params_dict.update(add_param)
geo_dict_dim.update(geo_dict)
if as_pickle:
start_geo, init_mode, funcart, atoms = read_from_pickle(
geo[0], ts_estim, geo_dict_dim)
else:
start_geo, funcart, atoms = build_new(geo, geo_dict_dim, zmatrix)
if name in ["lanczos", "dimer", "lanczos-rotate", "dimer-rotate"]:
init_mode = build_mode(mode, start_geo, funcart)
else:
assert mode == None
init_mode = None
# Build up the qfunc, calculator is included in atoms already
pes = compose(QFunc(atoms, calc=atoms.get_calculator()), funcart)
if "cache" in params_dict:
if params_dict["cache"] == None:
pes = Memoize(pes, FileStore("%s.ResultDict.pickle" % (name)))
else:
pes = Memoize(pes, FileStore(params_dict["cache"]))
else:
pes = Memoize(pes, FileStore("%s.ResultDict.pickle" % (name)))
#Attention inital mode need not be normed (and cannot as metric is not yet known)
return pes, start_geo, init_mode, params_dict, atoms, funcart
# starting geometries with fixed symmetries
func_h = ZMat([(), (0,), (0, 1), (1, 2, 0)])
min1 = func_h([var1, var1, var3, var1, var3, var4]).flatten()
min2 = func_h([var1, var1, var3, var1, var3, 2 * pi -var4]).flatten()
middle = func_h([var1, var1, var3, var1, var3, var8]).flatten()
# Mask fixes the "global parameter"
mask = [False]*3 + [True] + [False] * 2 + [True] + [False] + [True] * 4
func = Masked(func2, mask, min1)
# also reduce the starting values
min1 = reduce(min1, mask)
min2 = reduce(min2, mask)
middle = reduce(middle, mask)
# PES in internal coordinates:
pes = compose(pes, func)
# init path contains the two minima and a middle bead to enforce the
# starting path going in the right direction (else it would be just
# linear interpolation, what is not correct in this regard)
init_path = [min1, middle, min2]
if test_what == "contraforce":
# Metric consistent with coordinate transformation:
m1 = Metric(func)
m2 = Metric_reduced(func)
for geo in init_path:
# Check the symmetry:
print "GEOMETRY"
print "Geometry is symmetric?:"
#
# Z-matrix for water:
#
zmt = ZMat([(None, None, None), (1, None, None), (1, 2, None)], base=1)
#
# Initial values of internal coordinates:
#
s = zmt.pinv(x)
assert max(abs(s - zmt.pinv(zmt(s)))) < 1.0e-10
clean()
with QFunc(atoms, calc) as f:
f = Memoize(f, DirStore(salt="h2o, qm"))
e = compose(f, zmt)
print s, e(s)
s, info = minimize(e, s, algo=1, ftol=1.0e-2, xtol=1.0e-2)
print s, e(s), info["converged"]
#
# Internal coordinates:
#
# In: 0.97843364 0.97826543 1.87152024
# Out: 0.98477091 0.98477695 1.88111918
#
# Rigid water with optimized internal coordinates:
#
X = Rigid(zmt(s))
def read_dimer_input(rest, name):
"""
This function is similar to the one for pathsearcher
"""
from pts.ui.read_inputs import from_params_file
from pts.ui.read_COS import geo_params
from pts.defaults import are_strings
from pts.common import file2str
from pts.func import compose
from pts.qfunc import QFunc
from pts.memoize import Memoize, FileStore
from pts.defaults import di_default_params, qn_default_params, ln_default_params
from pts.trajectories import dimer_log
from pts.defaults import di_default_params, qn_default_params, di_default_params_rot
#This variables will be needed afterwards anyway
# independent of beeing given by user
geo_dict = {"format" : None, "zmt_format" : "direct"}
add_param = {}
paramfile = None
zmatrix = []
geo = None
mode = None
as_pickle = False
ts_estim = None
accept_all = False
give_help_if_needed(rest, name)
if rest[0] == "--accept_all":
rest = rest[1:]
accept_all = True
defaults_available = True
if name in ["dimer"]:
default_params = di_default_params
elif name in ["lanczos"]:
default_params = ln_default_params
elif name in ["lanczos-rotate", "dimer-rotate"]:
default_params = di_default_params_rot
elif name in ["qn", "simple_qn", "quasi-newton"]:
default_params = qn_default_params
else:
print >> stderr, "WARNING: No default parameter for specific method found"
print >> stderr, " There will be no test if the given parameter make sense"
default_params = {}
accept_all = True
defaults_available = False
if "--defaults" in rest:
if defaults_available:
print "The default parameters for the algorithm ", name, " are:"
for param, value in default_params.iteritems():
print " %s = %s" % (str(param), str(value))
else:
print "No default values available for the specific method", name
exit()
for i in range(len(rest)):
if rest == []:
break
# filter out all the options
if rest[0].startswith("--"):
o = rest[0][2:]
a = rest[1]
# filter out the special ones
if o == "paramfile":
# file containing parameters
paramfile = file2str(a)
elif o in ("zmatrix"):
# zmatrix if given separate to the geometries
zmatrix.append(a)
elif o in ("pickle"):
as_pickle = True
ts_estim = a
elif o in geo_params:
# only needed to build up the geometry
if o in ("mask"):
# needed to build up the geometry and wanted for params output
geo_dict[o] = get_mask(a)
elif o in ("cell", "pbc"):
geo_dict[o] = eval(a)
else:
geo_dict[o] = a
else:
# suppose that the rest are setting parameters
# we do not have a complete list of them
if not accept_all:
assert o in default_params or o == "rot_method", "Parameter %s" % (o)
if o in are_strings:
add_param[o] = a
else:
add_param[o] = eval(a)
rest = rest[2:]
else:
# This two files are needed any way: one geometry file and one
# for the modevector, expect the geoemtry file to be given first
if geo == None:
# For reusing pathsearcher routines with several geoemtries for input
geo = [ rest[0]]
else:
mode = rest[0]
rest = rest[1:]
if paramfile == None:
params_dict = add_param
geo_dict_dim = geo_dict
else:
if accept_all:
params_dict, geo_dict_dim = from_params_file_dimer(paramfile )
else:
params_dict, geo_dict_dim = from_params_file(paramfile, default_params )
params_dict.update(add_param)
geo_dict_dim.update(geo_dict)
if as_pickle:
start_geo, init_mode, funcart, atoms = read_from_pickle(geo[0], ts_estim, geo_dict_dim)
else:
start_geo, funcart, atoms = build_new(geo, geo_dict_dim, zmatrix)
if name in ["lanczos", "dimer", "lanczos-rotate", "dimer-rotate"]:
init_mode = build_mode(mode, start_geo, funcart)
else:
assert mode == None
init_mode = None
# Build up the qfunc, calculator is included in atoms already
pes = compose(QFunc(atoms, calc = atoms.get_calculator()), funcart)
if "cache" in params_dict:
if params_dict["cache"] == None:
pes = Memoize(pes, FileStore("%s.ResultDict.pickle" % (name)))
else:
pes = Memoize(pes, FileStore(params_dict["cache"]))
else:
pes = Memoize(pes, FileStore("%s.ResultDict.pickle" % (name)))
#Attention inital mode need not be normed (and cannot as metric is not yet known)
return pes, start_geo, init_mode, params_dict, atoms, funcart
