def __init__(self,
make_geom: bool = True,
debug: bool = False,
log: Any = None,
debug_file: Optional[str] = None,
mode: str = 'msc'):
"""
Initializes the OP2 object
Parameters
----------
make_geom : bool; default=False
reads the BDF tables
debug : bool; default=False
enables the debug log and sets the debug in the logger
log: log()
a logging object to write debug messages to
(.. seealso:: import logging)
debug_file : default=None -> no debug
sets the filename that will be written to
mode : str; default='msc'
{msc, nx}
"""
BDF.__init__(self, debug=debug, log=log)
OP2GeomCommon.__init__(self,
make_geom=make_geom,
debug=debug,
log=log,
debug_file=debug_file,
mode=mode)
def __init__(self, language='english'):
self.language = 'english'
BDF.__init__(self)
self.max_nid_len = None
self.max_eid_len = None
self.max_pid_len = None
self.max_mid_len = None
def __init__(self, make_geom=True,
debug=False, log=None, debug_file=None):
"""
Initializes the OP2 object
:param make_geom: reads the BDF tables (default=False)
:param debug: enables the debug log and sets the debug in the logger (default=False)
:param log: a logging object to write debug messages to
(.. seealso:: import logging)
:param debug_file: sets the filename that will be written to (default=None -> no debug)
"""
assert make_geom == True, make_geom
BDF.__init__(self, debug=debug, log=log)
GEOM1.__init__(self)
GEOM2.__init__(self)
GEOM3.__init__(self)
GEOM4.__init__(self)
EPT.__init__(self)
MPT.__init__(self)
DIT.__init__(self)
DYNAMICS.__init__(self)
OP2.__init__(self, debug, log=log, debug_file=debug_file)
self.make_geom = make_geom
def __init__(self, make_geom=True, debug=False, log=None, debug_file=None):
"""
Initializes the OP2 object
:param make_geom: reads the BDF tables (default=False)
:param debug: enables the debug log and sets the debug in the logger (default=False)
:param log: a logging object to write debug messages to
(.. seealso:: import logging)
:param debug_file: sets the filename that will be written to (default=None -> no debug)
"""
assert make_geom == True, make_geom
BDF.__init__(self, debug=debug, log=log)
GEOM1.__init__(self)
GEOM2.__init__(self)
GEOM3.__init__(self)
GEOM4.__init__(self)
EPT.__init__(self)
MPT.__init__(self)
DIT.__init__(self)
DYNAMICS.__init__(self)
OP2.__init__(self, debug, log=log, debug_file=debug_file)
self.make_geom = make_geom
def __init__(self, make_geom=True,
debug=False, log=None, debug_file=None, mode='msc'):
"""
Initializes the OP2 object
Parameters
----------
make_geom : bool; default=False
reads the BDF tables
debug : bool; default=False
enables the debug log and sets the debug in the logger
log: log()
a logging object to write debug messages to
(.. seealso:: import logging)
debug_file : default=None -> no debug
sets the filename that will be written to
mode : str; default='msc'
{msc, nx}
"""
# make_geom=False, debug=True, log=None, debug_file=None
BDF.__init__(self, debug=debug, log=log)
GEOM1.__init__(self)
GEOM2.__init__(self)
GEOM3.__init__(self)
GEOM4.__init__(self)
EPT.__init__(self)
MPT.__init__(self)
DIT.__init__(self)
DYNAMICS.__init__(self)
OP2.__init__(self, debug, log=log, debug_file=debug_file, mode=mode)
self.make_geom = True
def __init__(self, language='english'):
self.language = language
assert self.language in ['english']
BDF.__init__(self)
self.max_nid_len = 0
self.max_eid_len = 0
self.max_pid_len = 0
self.max_mid_len = 0
def __init__(self,
language='english',
debug: Optional[bool] = True,
log: Any = None,
mode: str = 'msc'):
self.language = language
assert self.language in ['english']
BDF.__init__(self, debug=debug, log=log, mode=mode)
self.max_nid_len = 0
self.max_eid_len = 0
self.max_pid_len = 0
self.max_mid_len = 0
def __init__(self, log, card_fingerprint_set):
"""
Initializes the BDFUniqueCard object
Parameters
----------
#debug : bool/None; default=True
#used to set the logger if no logger is passed in
#True: logs debug/info/error messages
#False: logs info/error messages
#None: logs error messages
log : logging module object / None
if log is set, debug is ignored and uses the
settings the logging object has
card_fingerprint_set : set([str, str, ...])
a set to store data
"""
self.card_set = card_fingerprint_set
#self.new_bdf = new_bdf
BDF.__init__(self, log=log)
def __init__(self,
make_geom=True,
debug=False,
log=None,
debug_file=None,
mode='msc'):
"""
Initializes the OP2 object
Parameters
----------
make_geom : bool; default=False
reads the BDF tables
debug : bool; default=False
enables the debug log and sets the debug in the logger
log: log()
a logging object to write debug messages to
(.. seealso:: import logging)
debug_file : default=None -> no debug
sets the filename that will be written to
mode : str; default='msc'
{msc, nx}
"""
# make_geom=False, debug=True, log=None, debug_file=None
BDF.__init__(self, debug=debug, log=log)
GEOM1.__init__(self)
GEOM2.__init__(self)
GEOM3.__init__(self)
GEOM4.__init__(self)
EPT.__init__(self)
MPT.__init__(self)
DIT.__init__(self)
DYNAMICS.__init__(self)
OP2.__init__(self, debug, log=log, debug_file=debug_file, mode=mode)
self.make_geom = True
def __init__(self, language='english'):
self.language = 'english'
BDF.__init__(self)
def __init__(self, log, fingset):
self.card_set = fingset
self.f = open('cards.out.bdf', 'wb')
#self.newBDF = newBDF
BDF.__init__(self, log=log)
def __init__(self, language='english'):
self.language = 'english'
BDF.__init__(self)
def __init__(self):
BDF.__init__(self)
self._type_map = {
'GRID': self.nodes,
#'RINGAX': self.nodes,
'MAT1': self.materials,
'MAT2': self.materials,
'MAT3': self.materials,
'MAT4': self.materials,
'MAT5': self.materials,
'MAT8': self.materials,
'MAT10': self.materials,
# shell
'CTRIAX': self.elements,
'CTRIA3': self.elements,
'CTRIA6': self.elements,
'CQUAD': self.elements,
'CQUAD4': self.elements,
'CQUAD8': self.elements,
'CQUADX': self.elements,
'PCOMP': self.properties,
'PCOMPG': self.properties,
'PSHELL': self.properties,
# shear,
'CSHEAR': self.elements,
'PSHEAR': self.properties,
# plane
#'PLPLANE' : self.elements,
# solid
'CTETRA' : self.elements,
'CPENTA' : self.elements,
'CHEXA' : self.elements,
'PSOLID' : self.properties,
'PLSOLID': self.properties,
# rod
'CONROD': self.elements,
'CROD' : self.elements,
'PROD' : self.properties,
# tube
'CTUBE' : self.elements,
'PTUBE' : self.properties,
# beam
'CBEAM' : self.elements,
'PBEAM' : self.properties,
'PBEAML' : self.properties,
# bar
'CBAR' : self.elements,
'PBAR' : self.properties,
'PBARL' : self.properties,
# bend
'CBEND': self.elements,
'PBEND': self.properties,
# bush
'CBUSH' : self.elements,
'CBUSH1D': self.elements,
'CBUSH2D': self.elements,
'PBUSH' : self.properties,
'PBUSH1D': self.properties,
#'PBUSH2D': self.properties,
#'PBUSHT' : self.properties,
# spring
'CELAS1': self.elements,
'CELAS2': self.elements,
'CELAS3': self.elements,
'CELAS4': self.elements,
'PELAS' : self.properties,
# dampers
'CFAST': self.elements,
'PFAST': self.properties,
# dampers
'CDAMP1': self.elements,
'CDAMP2': self.elements,
'CDAMP3': self.elements,
'CDAMP4': self.elements,
'CDAMP5': self.elements,
'PDAMP' : self.properties,
'PDAMPT': self.properties,
'PDAMP5': self.properties,
'PVISC' : self.properties,
#'CRAC2D' : self.elements,
#'CRAC3D' : self.elements,
#'PRAC2D' : self.properties,
#'PRAC3D' : self.properties,
# mass
#'CONM1': self.elements,
'CONM2' : self.elements,
'CMASS1': self.elements,
'CMASS2': self.elements,
'CMASS3': self.elements,
'CMASS4': self.elements,
'PMASS' : self.properties,
#'NSM' : self.elements, # ???
# rigid elements
'RBAR' : self.rigidElements,
'RBAR1' : self.rigidElements,
'RBE1' : self.rigidElements,
'RBE2' : self.rigidElements,
'RBE3' : self.rigidElements,
# methods
'EIGB' : self.methods,
'EIGC' : self.methods,
'EIGP' : self.methods,
'EIGR' : self.methods,
'EIGRL': self.methods,
# frequencies
#'FREQ' : self.freqs,
#'FREQ1' : self.freqs,
#'FREQ2' : self.freqs,
# param
'PARAM' : self.params,
# ========= remove these =============
# loads
'FORCE' : self.loads,
'FORCE1' : self.loads,
'FORCE2' : self.loads,
'MOMENT' : self.loads,
'MOMENT1' : self.loads,
'MOMENT2' : self.loads,
'RFORCE' : self.loads,
'LOAD' : self.loads,
'DLOAD' : self.loads,
'SLOAD' : self.loads,
'TLOAD1' : self.loads,
'TLOAD2' : self.loads,
'RLOAD1' : self.loads,
'RLOAD2' : self.loads,
'DAREA' : self.loads,
'GRAV' : self.loads,
#'ACCEL' : self.loads,
'ACCEL1' : self.loads,
# constraints
'SPC1' : self.spcObject,
'SPC' : self.spcObject,
'SPCADD' : self.spcObject,
'SPCAX' : self.spcObject,
'MPC' : self.mpcObject,
'MPCADD' : self.mpcObject,
}
for key in self._type_map:
assert key in self.cards_to_read, 'key=%r is not a valid card' % key
def __init__(self, log=None, debug=False):
BDF.__init__(self, debug=debug, log=log)
def __init__(self, log=None, debug=False):
BDF.__init__(self, debug=debug, log=log)
self.hyper = {}
self.flow = {}
self.cards_to_read.add('HYPER')
self.cards_to_read.add('FLOW')
def __init__(self, op2FileName, make_geom=False, debug=True, log=None):
"""
Initializes the OP2 object
:param op2FileName: the file to be parsed
:param make_geom: reads the BDF tables (default=False)
:param debug: prints data about how the OP2 was parsed (default=False)
:param log: a logging object to write debug messages to
(.. seealso:: import logging)
"""
BDF.__init__(self, debug=debug, log=log)
self.set_subcases() # initializes the variables
self.log.debug('op2FileName = %s' % (op2FileName))
bdfExtension = '.bdf'
f06Extension = '.f06'
(fname, extension) = os.path.splitext(op2FileName)
self.table_name = 'temp'
#: should the BDF tables be parsed
self.make_geom = make_geom
#: the input OP2 filename
self.op2FileName = op2FileName
#: the expected BDF filename (guessed)
self.bdfFileName = fname + bdfExtension
#: the expected F06 filename (guessed)
self.f06FileName = fname + f06Extension
#print "bdfFileName = ",self.bdfFileName
#: developer parameter to write the OP2 is ASCII format
#: to better understand it
self.make_op2_debug = False
#: BDF Title
self.Title = ''
#: limit output DTs
self.expected_times = {}
#self.expected_times = {1:array([0.1,0.12])}
#: file object containing the skipped cards
self.skippedCardsFile = open('skippedCards.out', 'a')
#: the list of supported tables (dont edit this)
self.tablesToRead = [
# nodes/geometry/loads/BCs
'GEOM1',
'GEOM2',
'GEOM3',
'GEOM4', # regular
'GEOM1S',
'GEOM2S',
'GEOM3S',
'GEOM4S', # superelements
'GEOM1OLD',
'GEOM1N', # ???
'EPT',
'MPT', # properties/materials
'EPTS',
'MPTS', # properties/materials - superelements
'EDTS', # ???
'DYNAMIC',
'DYNAMICS',
'DIT', # tables (e.g. TABLED1)
'LAMA',
'BLAMA', # eigenvalues
'BGPDT',
'BGPDTS', # boundary grids???
'EQEXIN',
'EQEXINS',
'PVT0',
'CASECC',
'EDOM',
'CASEXX',
'DESTAB', # design variables
'OQG1',
'OQGV1', # spc forces
'OQMG1', # mpc forces
'OUGV1',
'OUG1', # displacements
'OGPFB1', # grid point forces
'OGS1', # grid point stresses
'OEF1X',
'DOEF1',
'OEFIT', # element forces
'OPG1',
'OPGV1',
'OPNL1', # applied forces
'OES1',
'OES1X',
'OES1X1',
'OES1C', # stress
'OSTR1C',
'OSTR1X', # strains
'OESNLXR',
'OESNLXD',
'OESNL1X',
'OESNLBR', # nonlinear stress
'OESCP', # cylinder stress???
'OESTRCP', # cylinder strain???
'OESRT', # rotational stress?
'ONRGY1', # energy
'ONRGY2', # energy (sort2, unsupported)
'R1TABRG',
'HISADD', # SOL 200
# unsupported frequency results
'OAGPSD2',
'OAGATO2',
'OAGRMS2',
'OAGNO2',
'OAGCRM2',
'OEFPSD2',
'OEFATO2',
'OEFRMS2',
'OEFNO2',
'OEFCRM2',
'OESPSD2',
'OESATO2',
'OESRMS2',
'OESNO2',
'OESCRM2',
'OPGPSD2',
'OPGATO2',
'OPGRMS2',
'OPGNO2',
'OPGCRM2',
'OQGPSD2',
'OQGATO2',
'OQGRMS2',
'OQGNO2',
'OQGCRM2',
# supported-ish
'OQMPSD2',
'OQMATO2',
'OQMRMS2',
'OQMNO2',
'OQMCRM2',
'OSTRPSD2',
'OSTRATO2',
'OSTRRMS2',
'OSTRNO2',
'OSTRCRM2',
'OUGPSD2',
'OUGATO2',
'OUGCRM2',
'OUGNO2',
'OUGRMS2',
'OVGPSD2',
'OVGATO2',
'OVGRMS2',
'OVGNO2',
'OVGCRM2',
# TODO what do these do???
'OUPV1',
'VIEWTB',
'ERRORN',
'OFMPF2M',
'OSMPF2M',
'OPMPF2M',
'OGPMPF2M',
'OLMPF2M',
'PCOMPTS',
'OMM2',
'EDOM',
'STDISP',
'SDF',
'MONITOR',
'AEMONPT',
'OGPWG', # grid point weight
'OQP1',
'OCRUG',
'OCRPG',
# new
'AFRF',
'AGRF',
'PMRF',
'PERF',
'PFRF',
'FOL',
'DBCOPT',
'CONTACT',
]
#: a dictionary that maps an integer of the subcaseName to the
#: subcaseID
self.iSubcaseNameMap = {}
#: list of OP2 tables that were read
#: mainly for debugging
self.tablenames = []
self.__objects_init__()
def __init__(self, log, fingset):
self.card_set = fingset
self.f = open('cards.out.bdf', 'w')
#self.newBDF = newBDF
BDF.__init__(self, log=log)
def __init__(self, op2FileName, make_geom=False, debug=True, log=None):
"""
Initializes the OP2 object
:param op2FileName: the file to be parsed
:param make_geom: reads the BDF tables (default=False)
:param debug: prints data about how the OP2 was parsed (default=False)
:param log: a logging object to write debug messages to
(.. seealso:: import logging)
"""
BDF.__init__(self, debug=debug, log=log)
self.set_subcases() # initializes the variables
self.log.debug('op2FileName = %s' % (op2FileName))
bdfExtension = '.bdf'
f06Extension = '.f06'
(fname, extension) = os.path.splitext(op2FileName)
self.table_name = 'temp'
#: should the BDF tables be parsed
self.make_geom = make_geom
#: the input OP2 filename
self.op2FileName = op2FileName
#: the expected BDF filename (guessed)
self.bdfFileName = fname + bdfExtension
#: the expected F06 filename (guessed)
self.f06FileName = fname + f06Extension
#print "bdfFileName = ",self.bdfFileName
#: developer parameter to write the OP2 is ASCII format
#: to better understand it
self.make_op2_debug = False
#: BDF Title
self.Title = ''
#: limit output DTs
self.expected_times = {}
#self.expected_times = {1:array([0.1,0.12])}
#: file object containing the skipped cards
self.skippedCardsFile = open('skippedCards.out', 'a')
#: the list of supported tables (dont edit this)
self.tablesToRead = [
# nodes/geometry/loads/BCs
'GEOM1', 'GEOM2', 'GEOM3', 'GEOM4', # regular
'GEOM1S', 'GEOM2S', 'GEOM3S', 'GEOM4S', # superelements
'GEOM1OLD', 'GEOM1N', # ???
'EPT', 'MPT', # properties/materials
'EPTS', 'MPTS', # properties/materials - superelements
'EDTS', # ???
'DYNAMIC', 'DYNAMICS',
'DIT', # tables (e.g. TABLED1)
'LAMA', 'BLAMA', # eigenvalues
'BGPDT', 'BGPDTS', # boundary grids???
'EQEXIN', 'EQEXINS', 'PVT0', 'CASECC', 'EDOM', 'CASEXX',
'DESTAB', # design variables
'OQG1', 'OQGV1', # spc forces
'OQMG1', # mpc forces
'OUGV1', 'OUG1', # displacements
'OGPFB1', # grid point forces
'OGS1', # grid point stresses
'OEF1X', 'DOEF1', 'OEFIT', # element forces
'OPG1', 'OPGV1', 'OPNL1', # applied forces
'OES1', 'OES1X', 'OES1X1', 'OES1C', # stress
'OSTR1C', 'OSTR1X', # strains
'OESNLXR', 'OESNLXD', 'OESNL1X', 'OESNLBR', # nonlinear stress
'OESCP', # cylinder stress???
'OESTRCP', # cylinder strain???
'OESRT', # rotational stress?
'ONRGY1', # energy
'ONRGY2', # energy (sort2, unsupported)
'R1TABRG', 'HISADD', # SOL 200
# unsupported frequency results
'OAGPSD2', 'OAGATO2', 'OAGRMS2', 'OAGNO2', 'OAGCRM2',
'OEFPSD2', 'OEFATO2', 'OEFRMS2', 'OEFNO2', 'OEFCRM2',
'OESPSD2', 'OESATO2', 'OESRMS2', 'OESNO2', 'OESCRM2',
'OPGPSD2', 'OPGATO2', 'OPGRMS2', 'OPGNO2', 'OPGCRM2',
'OQGPSD2', 'OQGATO2', 'OQGRMS2', 'OQGNO2', 'OQGCRM2',
# supported-ish
'OQMPSD2', 'OQMATO2', 'OQMRMS2', 'OQMNO2', 'OQMCRM2',
'OSTRPSD2', 'OSTRATO2', 'OSTRRMS2', 'OSTRNO2', 'OSTRCRM2',
'OUGPSD2', 'OUGATO2', 'OUGCRM2', 'OUGNO2', 'OUGRMS2',
'OVGPSD2', 'OVGATO2', 'OVGRMS2', 'OVGNO2', 'OVGCRM2',
# TODO what do these do???
'OUPV1',
'VIEWTB', 'ERRORN',
'OFMPF2M', 'OSMPF2M', 'OPMPF2M', 'OGPMPF2M', 'OLMPF2M',
'PCOMPTS',
'OMM2',
'EDOM',
'STDISP', 'SDF', 'MONITOR', 'AEMONPT',
'OGPWG', # grid point weight
'OQP1',
'OCRUG', 'OCRPG',
# new
'AFRF', 'AGRF',
'PMRF', 'PERF', 'PFRF',
'FOL',
'DBCOPT','CONTACT',
]
#: a dictionary that maps an integer of the subcaseName to the
#: subcaseID
self.iSubcaseNameMap = {}
#: list of OP2 tables that were read
#: mainly for debugging
self.tablenames = []
self.__objects_init__()
def __init__(self, language='english', encoding='ascii'):
self.language = 'english'
BDF.__init__(self)
def __init__(self, language='english', encoding='ascii'):
self.language = 'english'
BDF.__init__(self)
def __init__(self):
BDF.__init__(self)
self._type_map = {
'GRID': self.nodes,
#'RINGAX': self.nodes,
'MAT1': self.materials,
'MAT2': self.materials,
'MAT3': self.materials,
'MAT4': self.materials,
'MAT5': self.materials,
'MAT8': self.materials,
'MAT10': self.materials,
# shell
'CTRIAX': self.elements,
'CTRIA3': self.elements,
'CTRIA6': self.elements,
'CQUAD': self.elements,
'CQUAD4': self.elements,
'CQUAD8': self.elements,
'CQUADX': self.elements,
'PCOMP': self.properties,
'PCOMPG': self.properties,
'PSHELL': self.properties,
# shear,
'CSHEAR': self.elements,
'PSHEAR': self.properties,
# plane
#'PLPLANE' : self.elements,
# solid
'CTETRA': self.elements,
'CPENTA': self.elements,
'CHEXA': self.elements,
'PSOLID': self.properties,
'PLSOLID': self.properties,
# rod
'CONROD': self.elements,
'CROD': self.elements,
'PROD': self.properties,
# tube
'CTUBE': self.elements,
'PTUBE': self.properties,
# beam
'CBEAM': self.elements,
'PBEAM': self.properties,
'PBEAML': self.properties,
# bar
'CBAR': self.elements,
'PBAR': self.properties,
'PBARL': self.properties,
# bend
'CBEND': self.elements,
'PBEND': self.properties,
# bush
'CBUSH': self.elements,
'CBUSH1D': self.elements,
'CBUSH2D': self.elements,
'PBUSH': self.properties,
'PBUSH1D': self.properties,
#'PBUSH2D': self.properties,
#'PBUSHT' : self.properties,
# spring
'CELAS1': self.elements,
'CELAS2': self.elements,
'CELAS3': self.elements,
'CELAS4': self.elements,
'PELAS': self.properties,
# dampers
'CFAST': self.elements,
'PFAST': self.properties,
# dampers
'CDAMP1': self.elements,
'CDAMP2': self.elements,
'CDAMP3': self.elements,
'CDAMP4': self.elements,
'CDAMP5': self.elements,
'PDAMP': self.properties,
'PDAMPT': self.properties,
'PDAMP5': self.properties,
'PVISC': self.properties,
#'CRAC2D' : self.elements,
#'CRAC3D' : self.elements,
#'PRAC2D' : self.properties,
#'PRAC3D' : self.properties,
# mass
#'CONM1': self.elements,
'CONM2': self.elements,
'CMASS1': self.elements,
'CMASS2': self.elements,
'CMASS3': self.elements,
'CMASS4': self.elements,
'PMASS': self.properties,
#'NSM' : self.elements, # ???
# rigid elements
'RBAR': self.rigidElements,
'RBAR1': self.rigidElements,
'RBE1': self.rigidElements,
'RBE2': self.rigidElements,
'RBE3': self.rigidElements,
# methods
'EIGB': self.methods,
'EIGC': self.methods,
'EIGP': self.methods,
'EIGR': self.methods,
'EIGRL': self.methods,
# frequencies
#'FREQ' : self.freqs,
#'FREQ1' : self.freqs,
#'FREQ2' : self.freqs,
# param
'PARAM': self.params,
# ========= remove these =============
# loads
'FORCE': self.loads,
'FORCE1': self.loads,
'FORCE2': self.loads,
'MOMENT': self.loads,
'MOMENT1': self.loads,
'MOMENT2': self.loads,
'RFORCE': self.loads,
'LOAD': self.loads,
'DLOAD': self.loads,
'SLOAD': self.loads,
'TLOAD1': self.loads,
'TLOAD2': self.loads,
'RLOAD1': self.loads,
'RLOAD2': self.loads,
'DAREA': self.loads,
'GRAV': self.loads,
#'ACCEL' : self.loads,
'ACCEL1': self.loads,
# constraints
'SPC1': self.spcObject,
'SPC': self.spcObject,
'SPCADD': self.spcObject,
'SPCAX': self.spcObject,
'MPC': self.mpcObject,
'MPCADD': self.mpcObject,
}
for key in self._type_map:
assert key in self.cardsToRead, 'key=%r is not a valid card' % key
def __init__(self, log=None, debug=False):
BDF.__init__(self, debug=debug, log=log)
self.hyper = {}
self.flow = {}
self.cards_to_read.add('HYPER')
self.cards_to_read.add('FLOW')
def __init__(self):
BDF.__init__(self)
def __init__(self, bdf_out_filename, debug=True, log=None):
BDF.__init__(self, debug=debug, log=log)
self._auto_reject = True
self.bdf_out_filename = bdf_out_filename
def __init__(self, bdf_out_filename, debug=True, log=None):
BDF.__init__(self, debug=debug, log=log)
self.bdf_out_filename = bdf_out_filename
def __init__(self, language='english'):
self.language = language
assert self.language in ['english']
BDF.__init__(self)
