def OES_Rod1_alt(self):
"""
genericStressReader - works on CROD_1, CELAS2_12
stress & strain
format_code=1 sort_code=1 (eid,axial,axial,torsion,torsion)
"""
dt = self.nonlinear_factor
(format1, extract) = self.getOUG_FormatStart()
nTotal = 12
format1 += '4f'
is_magnitude_phase = self.is_magnitude_phase()
n = 0
nEntries = len(self.data) // nTotal
for i in range(nEntries):
eData = self.data[n:n + nTotal]
(eid, axialReal, axialImag, torsionReal,
torsionImag) = unpack(format1, eData)
if is_magnitude_phase:
(axial) = polar_to_real_imag(axialReal, axialImag)
(torsion) = polar_to_real_imag(torsionReal, torsionImag)
else:
axial = complex(axialReal, axialImag)
torsion = complex(torsionReal, torsionImag)
#print "out = ",out
eid = extract(eid, dt)
self.obj.add_new_eid(dt, eid, axial, torsion)
n += nTotal
self.data = self.data[n:]
def OES_CBUSH1D_40_alt(self):
dt = self.nonlinear_factor
(format1, extract) = self.getOUG_FormatStart()
is_magnitude_phase = self.is_magnitude_phase()
assert self.num_wide == 9, "num_wide=%s not 9" % (self.num_wide)
nTotal = 36 # 4*9
format1 += '8f'
while len(self.data) >= nTotal:
eData = self.data[0:nTotal]
self.data = self.data[nTotal:]
out = unpack(format1, eData) # num_wide=25
(eid, fer, uer, aor, aer, fei, uei, aoi, aei) = out
eid = extract(eid, dt)
if is_magnitude_phase:
fe = polar_to_real_imag(fer, fei)
ue = polar_to_real_imag(uer, uei)
ao = polar_to_real_imag(aor, aoi)
ae = polar_to_real_imag(aer, aei)
else:
fe = complex(fer, fei)
ue = complex(uer, uei)
ao = complex(aor, aoi)
ae = complex(aer, aei)
self.obj.add_new_eid(self.element_type, dt, eid, fe, ue, ao, ae)
def OEF_Rod_alt(self): # 1-CROD, 3-CTUBE, 10-CONROD
#device_code = self.device_code
dt = self.nonlinear_factor
(format1, extract) = self.getOEF_FormatStart()
format1 += '4f'
is_magnitude_phase = self.is_magnitude_phase()
while len(self.data) >= 20: # 5*4
eData = self.data[0:20]
self.data = self.data[20:]
#print "len(data) = ",len(eData)
out = unpack(format1, eData)
(eid, axialReal, torqueReal, axialImag, torqueImag) = out
if is_magnitude_phase:
(axial) = polar_to_real_imag(axialReal, axialImag)
(torque) = polar_to_real_imag(torqueReal, torqueImag)
else:
axial = complex(axialReal, axialImag)
torque = complex(torqueReal, torqueImag)
eid2 = extract(eid, dt)
#print "eType=%s" %(eType)
dataIn = [eid2, axial, torque]
#print "%s" %(self.get_element_type(self.element_type)),dataIn
#eid = self.obj.add_new_eid(out)
self.obj.add(dt, dataIn)
def OES_CBUSH1D_40_alt(self):
dt = self.nonlinear_factor
(format1, extract) = self.getOUG_FormatStart()
is_magnitude_phase = self.is_magnitude_phase()
assert self.num_wide == 9, "num_wide=%s not 9" % (self.num_wide)
nTotal = 36 # 4*9
format1 += '8f'
while len(self.data) >= nTotal:
eData = self.data[0:nTotal]
self.data = self.data[nTotal:]
out = unpack(format1, eData) # num_wide=25
(eid, fer, uer, aor, aer,
fei, uei, aoi, aei) = out
eid = extract(eid, dt)
if is_magnitude_phase:
fe = polar_to_real_imag(fer, fei)
ue = polar_to_real_imag(uer, uei)
ao = polar_to_real_imag(aor, aoi)
ae = polar_to_real_imag(aer, aei)
else:
fe = complex(fer, fei)
ue = complex(uer, uei)
ao = complex(aor, aoi)
ae = complex(aer, aei)
self.obj.add_new_eid(self.element_type, dt, eid, fe, ue, ao, ae)
def OES_Rod1_alt(self):
"""
genericStressReader - works on CROD_1, CELAS2_12
stress & strain
format_code=1 sort_code=1 (eid,axial,axial,torsion,torsion)
"""
dt = self.nonlinear_factor
(format1, extract) = self.getOUG_FormatStart()
nTotal = 12
format1 += '4f'
is_magnitude_phase = self.is_magnitude_phase()
n = 0
nEntries = len(self.data) // nTotal
for i in range(nEntries):
eData = self.data[n:n + nTotal]
(eid, axialReal, axialImag, torsionReal,
torsionImag) = unpack(format1, eData)
if is_magnitude_phase:
(axial) = polar_to_real_imag(axialReal, axialImag)
(torsion) = polar_to_real_imag(torsionReal, torsionImag)
else:
axial = complex(axialReal, axialImag)
torsion = complex(torsionReal, torsionImag)
#print "out = ",out
eid = extract(eid, dt)
self.obj.add_new_eid(dt, eid, axial, torsion)
n += nTotal
self.data = self.data[n:]
def OEF_Spring_alt(self): # 11-CELAS1, 12-CELAS2, 13-CELAS3, 14-CELAS4
dt = self.nonlinear_factor
(format1, extract) = self.getOEF_FormatStart()
format1 += 'ff'
is_magnitude_phase = self.is_magnitude_phase()
while len(self.data) >= 12: # 3*4
eData = self.data[0:12]
self.data = self.data[12:]
#print "len(data) = ",len(eData)
out = unpack(format1, eData)
(eid, forceReal, forceImag) = out
eid2 = extract(eid, dt)
#print "eType=%s" %(eType)
if is_magnitude_phase:
force = polar_to_real_imag(forceReal, forceImag)
else:
force = complex(forceReal, forceImag)
dataIn = [eid2, force]
#print "%s" %(self.get_element_type(self.element_type)),dataIn
#eid = self.obj.add_new_eid(out)
self.obj.add(dt, dataIn)
def OEF_Beam_alt(self): # 2-CBEAM
dt = self.nonlinear_factor
(format1, extract) = self.getOEF_FormatStart()
is_magnitude_phase = self.is_magnitude_phase()
#print self.code_information()
#nTotal = 16*11+1
formatAll = 'i15f'
while len(self.data) >= 708: # (16*11+1)*4 = 177*4
eData = self.data[0:4]
self.data = self.data[4:]
eidTemp, = unpack(format1, eData)
eid2 = extract(eidTemp, dt)
for i in range(11):
eData = self.data[0:64]
self.data = self.data[64:]
#print "len(data) = ",len(eData)
out = unpack(formatAll, eData)
(nid, sd, bm1r, bm2r, ts1r, ts2r, afr, ttrqr, wtrqr,
bm1i, bm2i, ts1i, ts2i, afi, ttrqi, wtrqi) = out
if is_magnitude_phase:
bm1 = polar_to_real_imag(bm1r, bm1i)
bm2 = polar_to_real_imag(bm2r, bm2i)
ts1 = polar_to_real_imag(ts1r, ts1i)
ts2 = polar_to_real_imag(ts2r, ts2i)
af = polar_to_real_imag(afr, afi)
ttrq = polar_to_real_imag(ttrqr, ttrqi)
wtrq = polar_to_real_imag(wtrqr, wtrqi)
else:
bm1 = complex(bm1r, bm1i)
bm2 = complex(bm2r, bm2i)
ts1 = complex(ts1r, ts1i)
ts2 = complex(ts2r, ts2i)
af = complex(afr, afi)
ttrq = complex(ttrqr, ttrqi)
wtrq = complex(wtrqr, wtrqi)
#print "eidTemp = ",eidTemp
#print "nid = ",nid
#print "sd = ",sd
#eid = self.obj.add_new_eid(out)
if i == 0: # isNewElement:
dataIn = [eid2, nid, sd, bm1, bm2,
ts1, ts2, af, ttrq, wtrq]
#print "%s cNew " %(self.get_element_type(self.element_type)),dataIn
self.obj.addNewElement(dt, dataIn)
#print
elif sd > 0.:
dataIn = [eid2, nid, sd, bm1, bm2,
ts1, ts2, af, ttrq, wtrq]
#print "%s cOld " %(self.get_element_type(self.element_type)),dataIn
self.obj.add(dt, dataIn)
def OES_CBAR_34_alt(self):
dt = self.nonlinear_factor
#print "len(data) = ",len(self.data)
assert self.num_wide == 19, 'invalid num_wide...num_wide=%s' % (
self.num_wide)
(format1, extract) = self.getOUG_FormatStart()
format1 += '18f'
is_magnitude_phase = self.is_magnitude_phase()
while len(self.data) >= 76:
#self.print_block(self.data)
eData = self.data[0:76]
self.data = self.data[76:]
#print "len(data) = ",len(eData)
(eid, s1ar, s2ar, s3ar, s4ar, axialr,
s1ai, s2ai, s3ai, s4ai, axiali,
s1br, s2br, s3br, s4br,
s1bi, s2bi, s3bi, s4bi) = unpack(format1, eData)
if is_magnitude_phase:
s1a = polar_to_real_imag(s1ar, s1ai)
s1b = polar_to_real_imag(s1br, s1bi)
s2a = polar_to_real_imag(s2ar, s2ai)
s2b = polar_to_real_imag(s2br, s2bi)
s3a = polar_to_real_imag(s3ar, s3ai)
s3b = polar_to_real_imag(s3br, s3bi)
s4a = polar_to_real_imag(s4ar, s4ai)
s4b = polar_to_real_imag(s4br, s4bi)
axial = polar_to_real_imag(axialr, axiali)
else:
s1a = complex(s1ar, s1ai)
s1b = complex(s1br, s1bi)
s2a = complex(s2ar, s2ai)
s2b = complex(s2br, s2bi)
s3a = complex(s3ar, s3ai)
s3b = complex(s3br, s3bi)
s4a = complex(s4ar, s4ai)
s4b = complex(s4br, s4bi)
axial = complex(axialr, axiali)
eid2 = extract(eid, dt)
self.obj.add_new_eid('CBAR', dt, eid2, s1a, s2a, s3a, s4a, axial,
s1b, s2b, s3b, s4b)
def OES_CBAR_34_alt(self):
dt = self.nonlinear_factor
#print "len(data) = ",len(self.data)
assert self.num_wide == 19, 'invalid num_wide...num_wide=%s' % (
self.num_wide)
(format1, extract) = self.getOUG_FormatStart()
format1 += '18f'
is_magnitude_phase = self.is_magnitude_phase()
while len(self.data) >= 76:
#self.print_block(self.data)
eData = self.data[0:76]
self.data = self.data[76:]
#print "len(data) = ",len(eData)
(eid, s1ar, s2ar, s3ar, s4ar, axialr, s1ai, s2ai, s3ai, s4ai,
axiali, s1br, s2br, s3br, s4br, s1bi, s2bi, s3bi,
s4bi) = unpack(format1, eData)
if is_magnitude_phase:
s1a = polar_to_real_imag(s1ar, s1ai)
s1b = polar_to_real_imag(s1br, s1bi)
s2a = polar_to_real_imag(s2ar, s2ai)
s2b = polar_to_real_imag(s2br, s2bi)
s3a = polar_to_real_imag(s3ar, s3ai)
s3b = polar_to_real_imag(s3br, s3bi)
s4a = polar_to_real_imag(s4ar, s4ai)
s4b = polar_to_real_imag(s4br, s4bi)
axial = polar_to_real_imag(axialr, axiali)
else:
s1a = complex(s1ar, s1ai)
s1b = complex(s1br, s1bi)
s2a = complex(s2ar, s2ai)
s2b = complex(s2br, s2bi)
s3a = complex(s3ar, s3ai)
s3b = complex(s3br, s3bi)
s4a = complex(s4ar, s4ai)
s4b = complex(s4br, s4bi)
axial = complex(axialr, axiali)
eid2 = extract(eid, dt)
self.obj.add_new_eid('CBAR', dt, eid2, s1a, s2a, s3a, s4a, axial,
s1b, s2b, s3b, s4b)
def apply_mag_phase(floats: Any, is_magnitude_phase: bool, isave1: List[int],
isave2: List[int]) -> Any:
"""converts mag/phase data to real/imag"""
if is_magnitude_phase:
mag = floats[:, isave1]
phase = floats[:, isave2]
real_imag = polar_to_real_imag(mag, phase)
else:
real = floats[:, isave1]
imag = floats[:, isave2]
real_imag = real + 1.j * imag
return real_imag
def readOGF_numWide16(self):
dt = self.nonlinear_factor
(format1, extract) = self.getOEF_FormatStart()
format1 += 'i8s12f'
is_magnitude_phase = self.is_magnitude_phase()
while len(self.data) >= 64:
eData = self.data[0:4 * 16]
self.data = self.data[4 * 16:]
out = unpack(format1, eData)
(eKey, eid, elemName, f1r, f2r, f3r, m1r, m2r, m3r, f1i, f2i, f3i,
m1i, m2i, m3i) = out
eKey = extract(eKey, dt)
if is_magnitude_phase:
f1 = polar_to_real_imag(f1r, f1i)
m1 = polar_to_real_imag(m1r, m1i)
f2 = polar_to_real_imag(f2r, f2i)
m2 = polar_to_real_imag(m2r, m2i)
f3 = polar_to_real_imag(f3r, f3i)
m3 = polar_to_real_imag(m3r, m3i)
else:
f1 = complex(f1r, f1i)
m1 = complex(m1r, m1i)
f2 = complex(f2r, f2i)
m2 = complex(m2r, m2i)
f3 = complex(f3r, f3i)
m3 = complex(m3r, m3i)
elemName = elemName.strip()
#print "eid/dt/freq=%s eid=%-6s eName=%-8s f1=%s f2=%s f3=%s m1=%s m2=%s m3=%s" %(ekey,eid,elemName,f1r+f1i,f2r+f2i,f3r+f3i,m1r+m1i,m2r+m2i,m3r+m3i)
self.obj.add(dt, eKey, eid, elemName, f1, f2, f3, m1, m2, m3)
def readOGF_numWide16(self):
dt = self.nonlinear_factor
(format1, extract) = self.getOEF_FormatStart()
format1 += 'i8s12f'
is_magnitude_phase = self.is_magnitude_phase()
while len(self.data) >= 64:
eData = self.data[0:4 * 16]
self.data = self.data[4 * 16:]
out = unpack(format1, eData)
(eKey, eid, elemName, f1r, f2r, f3r, m1r, m2r, m3r,
f1i, f2i, f3i, m1i, m2i, m3i) = out
eKey = extract(eKey, dt)
if is_magnitude_phase:
f1 = polar_to_real_imag(f1r, f1i)
m1 = polar_to_real_imag(m1r, m1i)
f2 = polar_to_real_imag(f2r, f2i)
m2 = polar_to_real_imag(m2r, m2i)
f3 = polar_to_real_imag(f3r, f3i)
m3 = polar_to_real_imag(m3r, m3i)
else:
f1 = complex(f1r, f1i)
m1 = complex(m1r, m1i)
f2 = complex(f2r, f2i)
m2 = complex(m2r, m2i)
f3 = complex(f3r, f3i)
m3 = complex(m3r, m3i)
elemName = elemName.strip()
#print "eid/dt/freq=%s eid=%-6s eName=%-8s f1=%s f2=%s f3=%s m1=%s m2=%s m3=%s" %(ekey,eid,elemName,f1r+f1i,f2r+f2i,f3r+f3i,m1r+m1i,m2r+m2i,m3r+m3i)
self.obj.add(dt, eKey, eid, elemName, f1, f2, f3, m1, m2, m3)
def _read_complex_table(self, data, result_name, flag):
if self.debug4():
self.binary_debug.write(' _read_complex_table\n')
assert flag in ['node', 'elem'], flag
dt = self.nonlinear_factor
format1 = '2i12f'
is_magnitude_phase = self.is_magnitude_phase()
n = 0
ntotal = 56 # 14 * 4
obj = self.obj
nnodes = len(data) // ntotal
s = Struct(format1)
assert self.obj is not None
assert nnodes > 0
#assert len(data) % ntotal == 0
if self.debug4():
self.binary_debug.write(' nnodes=%i\n' % (nnodes))
for inode in range(nnodes):
edata = data[n:n+ntotal]
out = s.unpack(edata)
(eid_device, grid_type, txr, tyr, tzr, rxr, ryr, rzr,
txi, tyi, tzi, rxi, ryi, rzi) = out
eid = (eid_device - self.device_code) // 10
if self.debug4():
self.binary_debug.write(' %s=%i %s\n' % (flag, eid, str(out)))
if is_magnitude_phase:
tx = polar_to_real_imag(txr, txi)
ty = polar_to_real_imag(tyr, tyi)
tz = polar_to_real_imag(tzr, tzi)
rx = polar_to_real_imag(rxr, rxi)
ry = polar_to_real_imag(ryr, ryi)
rz = polar_to_real_imag(rzr, rzi)
else:
tx = complex(txr, txi)
ty = complex(tyr, tyi)
tz = complex(tzr, tzi)
rx = complex(rxr, rxi)
ry = complex(ryr, ryi)
rz = complex(rzr, rzi)
obj.add(dt, eid, grid_type, tx, ty, tz, rx, ry, rz)
n += ntotal
return n
def OEF_CBar_alt(self): # 34-CBAR
dt = self.nonlinear_factor
(format1, extract) = self.getOEF_FormatStart()
format1 += '16f'
is_magnitude_phase = self.is_magnitude_phase()
while len(self.data) >= 68: # 17*4
eData = self.data[0:68]
self.data = self.data[68:]
#print "len(data) = ",len(eData)
out = unpack(format1, eData)
(eid, bm1ar, bm2ar, bm1br, bm2br, ts1r, ts2r, afr, trqr,
bm1ai, bm2ai, bm1bi, bm2bi, ts1i, ts2i, afi, trqi) = out
eid2 = extract(eid, dt)
#print "eType=%s" %(eType)
if is_magnitude_phase:
bm1a = polar_to_real_imag(bm1ar, bm1ai)
bm2a = polar_to_real_imag(bm2ar, bm2ai)
bm1b = polar_to_real_imag(bm1br, bm1bi)
bm2b = polar_to_real_imag(bm2br, bm2bi)
ts1 = polar_to_real_imag(ts1r, ts1i)
ts2 = polar_to_real_imag(ts2r, ts2i)
af = polar_to_real_imag(afr, afi)
trq = polar_to_real_imag(trqr, trqi)
else:
bm1a = complex(bm1ar, bm1ai)
bm2a = complex(bm2ar, bm2ai)
bm1b = complex(bm1br, bm1bi)
bm2b = complex(bm2br, bm2bi)
ts1 = complex(ts1r, ts1i)
ts2 = complex(ts2r, ts2i)
af = complex(afr, afi)
trq = complex(trqr, trqi)
dataIn = [eid2, bm1a, bm2a, bm1b, bm2b, ts1, ts2, af, trq]
#print "%s" %(self.get_element_type(self.element_type)),dataIn
#eid = self.obj.add_new_eid(out)
self.obj.add(dt, dataIn)
def OEF_Plate_alt(self): # 33-CQUAD4,74-CTRIA3
dt = self.nonlinear_factor
(format1, extract) = self.getOEF_FormatStart()
format1 += '16f'
is_magnitude_phase = self.is_magnitude_phase()
while len(self.data) >= 68: # 17*4
eData = self.data[0:68]
self.data = self.data[68:]
#print "len(data) = ",len(eData)
out = unpack(format1, eData)
(eid, mxr, myr, mxyr, bmxr, bmyr, bmxyr, txr, tyr,
mxi, myi, mxyi, bmxi, bmyi, bmxyi, txi, tyi) = out
eid2 = extract(eid, dt)
#print "eType=%s" %(eType)
if is_magnitude_phase:
mx = polar_to_real_imag(mxr, mxi)
my = polar_to_real_imag(myr, myi)
mxy = polar_to_real_imag(mxyr, mxyi)
bmx = polar_to_real_imag(bmxr, bmxi)
bmy = polar_to_real_imag(bmyr, bmyi)
bmxy = polar_to_real_imag(bmxyr, bmxyi)
tx = polar_to_real_imag(txr, txi)
ty = polar_to_real_imag(tyr, tyi)
else:
mx = complex(mxr, mxi)
my = complex(myr, myi)
mxy = complex(mxyr, mxyi)
bmx = complex(bmxr, bmxi)
bmy = complex(bmyr, bmyi)
bmxy = complex(bmxyr, bmxyi)
tx = complex(txr, txi)
ty = complex(tyr, tyi)
dataIn = [eid2, mx, my, mxy, bmx, bmy, bmxy, tx, ty]
#print "%s" %(self.get_element_type(self.element_type)),dataIn
#eid = self.obj.add_new_eid(out)
self.obj.add(dt, dataIn)
def _read_complex_table2(self, data, result_name, flag):
#return
if self.debug4():
self.binary_debug.write(' _read_complex_table\n')
assert flag in ['node', 'elem'], flag
dt = self.nonlinear_factor
format1 = 'fi12f'
is_magnitude_phase = self.is_magnitude_phase()
n = 0
ntotal = 56 # 14 * 4
nnodes = len(data) // ntotal
s = Struct(format1)
assert self.obj is not None
assert nnodes > 0
#assert len(data) % ntotal == 0
for inode in xrange(nnodes):
edata = data[n:n + ntotal]
out = s.unpack(edata)
(freq, grid_type, txr, tyr, tzr, rxr, ryr, rzr, txi, tyi, tzi, rxi,
ryi, rzi) = out
if self.debug4():
self.binary_debug.write(' %s=%i %s\n' %
('freq', freq, str(out)))
if is_magnitude_phase:
tx = polar_to_real_imag(txr, txi)
ty = polar_to_real_imag(tyr, tyi)
tz = polar_to_real_imag(tzr, tzi)
rx = polar_to_real_imag(rxr, rxi)
ry = polar_to_real_imag(ryr, ryi)
rz = polar_to_real_imag(rzr, rzi)
else:
tx = complex(txr, txi)
ty = complex(tyr, tyi)
tz = complex(tzr, tzi)
rx = complex(rxr, rxi)
ry = complex(ryr, ryi)
rz = complex(rzr, rzi)
data_in = [freq, grid_type, tx, ty, tz, rx, ry, rz]
self.obj.add(dt, data_in)
n += ntotal
return n
def _read_complex_table2(self, data, result_name, flag):
#return
if self.debug4():
self.binary_debug.write(' _read_complex_table\n')
assert flag in ['node', 'elem'], flag
dt = self.nonlinear_factor
format1 = 'fi12f'
is_magnitude_phase = self.is_magnitude_phase()
n = 0
ntotal = 56 # 14 * 4
nnodes = len(data) // ntotal
s = Struct(format1)
assert self.obj is not None
assert nnodes > 0
#assert len(data) % ntotal == 0
for inode in xrange(nnodes):
edata = data[n:n+ntotal]
out = s.unpack(edata)
(freq, grid_type, txr, tyr, tzr, rxr, ryr, rzr,
txi, tyi, tzi, rxi, ryi, rzi) = out
if self.debug4():
self.binary_debug.write(' %s=%i %s\n' % ('freq', freq, str(out)))
if is_magnitude_phase:
tx = polar_to_real_imag(txr, txi)
ty = polar_to_real_imag(tyr, tyi)
tz = polar_to_real_imag(tzr, tzi)
rx = polar_to_real_imag(rxr, rxi)
ry = polar_to_real_imag(ryr, ryi)
rz = polar_to_real_imag(rzr, rzi)
else:
tx = complex(txr, txi)
ty = complex(tyr, tyi)
tz = complex(tzr, tzi)
rx = complex(rxr, rxi)
ry = complex(ryr, ryi)
rz = complex(rzr, rzi)
data_in = [freq, grid_type, tx, ty, tz, rx, ry, rz]
self.obj.add(dt, data_in)
n += ntotal
return n
def OES_CTRIA3_74_alt(self): # in progress
"""
DISTANCE,NORMAL-X,NORMAL-Y,SHEAR-XY,ANGLE,MAJOR,MINOR,VONMISES
stress is extracted at the centroid
"""
assert self.num_wide == 15, 'invalid num_wide...num_wide=%s' % (
self.num_wide)
dt = self.nonlinear_factor
(format1, extract) = self.getOUG_FormatStart()
format1 += '14f'
is_magnitude_phase = self.is_magnitude_phase()
while len(self.data) >= 60:
eData = self.data[0:60] # 4*15=60
self.data = self.data[60:]
out = unpack(format1, eData)
(eid, fd1, sx1r, sx1i, sy1r, sy1i, txy1r, txy1i,
fd2, sx2r, sx2i, sy2r, sy2i, txy2r, txy2i) = out
if is_magnitude_phase:
sx1 = polar_to_real_imag(sx1r, sx1i)
sy1 = polar_to_real_imag(sy1r, sy1i)
sx2 = polar_to_real_imag(sx2r, sx2i)
sy2 = polar_to_real_imag(sy2r, sy2i)
txy1 = polar_to_real_imag(txy1r, txy1i)
txy2 = polar_to_real_imag(txy2r, txy2i)
else:
sx1 = complex(sx1r, sx1i)
sy1 = complex(sy1r, sy1i)
sx2 = complex(sx2r, sx2i)
sy2 = complex(sy2r, sy2i)
txy1 = complex(txy1r, txy1i)
txy2 = complex(txy2r, txy2i)
eid = extract(eid, dt)
#print "eid=%i fd1=%i sx1=%i sy1=%i txy1=%i" %(eid,fd1,sx1,sy1,txy1)
#print " fd2=%i sx2=%i sy2=%i txy2=%i\n" %(fd2,sx2,sy2,txy2)
self.obj.add_new_eid('CTRIA3', dt, eid, 'C', fd1, sx1, sy1, txy1)
self.obj.add(dt, eid, 'C', fd2, sx2, sy2, txy2)
if self.make_op2_debug:
self.op2Debug.write('%s\n' % str(out))
def OES_CTRIA3_74_alt(self): # in progress
"""
DISTANCE,NORMAL-X,NORMAL-Y,SHEAR-XY,ANGLE,MAJOR,MINOR,VONMISES
stress is extracted at the centroid
"""
assert self.num_wide == 15, 'invalid num_wide...num_wide=%s' % (
self.num_wide)
dt = self.nonlinear_factor
(format1, extract) = self.getOUG_FormatStart()
format1 += '14f'
is_magnitude_phase = self.is_magnitude_phase()
while len(self.data) >= 60:
eData = self.data[0:60] # 4*15=60
self.data = self.data[60:]
out = unpack(format1, eData)
(eid, fd1, sx1r, sx1i, sy1r, sy1i, txy1r, txy1i, fd2, sx2r, sx2i,
sy2r, sy2i, txy2r, txy2i) = out
if is_magnitude_phase:
sx1 = polar_to_real_imag(sx1r, sx1i)
sy1 = polar_to_real_imag(sy1r, sy1i)
sx2 = polar_to_real_imag(sx2r, sx2i)
sy2 = polar_to_real_imag(sy2r, sy2i)
txy1 = polar_to_real_imag(txy1r, txy1i)
txy2 = polar_to_real_imag(txy2r, txy2i)
else:
sx1 = complex(sx1r, sx1i)
sy1 = complex(sy1r, sy1i)
sx2 = complex(sx2r, sx2i)
sy2 = complex(sy2r, sy2i)
txy1 = complex(txy1r, txy1i)
txy2 = complex(txy2r, txy2i)
eid = extract(eid, dt)
#print "eid=%i fd1=%i sx1=%i sy1=%i txy1=%i" %(eid,fd1,sx1,sy1,txy1)
#print " fd2=%i sx2=%i sy2=%i txy2=%i\n" %(fd2,sx2,sy2,txy2)
self.obj.add_new_eid('CTRIA3', dt, eid, 'C', fd1, sx1, sy1, txy1)
self.obj.add(dt, eid, 'C', fd2, sx2, sy2, txy2)
if self.make_op2_debug:
self.op2Debug.write('%s\n' % str(out))
def OUG_ComplexTable(self):
dt = self.nonlinear_factor
(format1, extract) = self.getOUG_FormatStart()
format1 += 'i12f'
#print "format1 = ",format1
is_magnitude_phase = self.is_magnitude_phase()
while len(self.data) >= 56: # 14*4
eData = self.data[0:56]
self.data = self.data[56:]
#print "len(data) = ",len(eData)
out = unpack(format1, eData)
(eid, gridType, txr, tyr, tzr, rxr, ryr, rzr,
txi, tyi, tzi, rxi, ryi, rzi) = out
if is_magnitude_phase:
tx = polar_to_real_imag(txr, txi)
rx = polar_to_real_imag(rxr, rxi)
ty = polar_to_real_imag(tyr, tyi)
ry = polar_to_real_imag(ryr, ryi)
tz = polar_to_real_imag(tzr, tzi)
rz = polar_to_real_imag(rzr, rzi)
else:
tx = complex(txr, txi)
rx = complex(rxr, rxi)
ty = complex(tyr, tyi)
ry = complex(ryr, ryi)
tz = complex(tzr, tzi)
rz = complex(rzr, rzi)
eid2 = extract(eid, dt)
#print "eType=%s" %(eType)
dataIn = [eid2, gridType, tx, ty, tz, rx, ry, rz]
#print "%s" %(self.get_element_type(self.element_type)),dataIn
#eid = self.obj.add_new_eid(out)
self.obj.add(dt, dataIn)
def OUG_ComplexTable(self):
dt = self.nonlinear_factor
(format1, extract) = self.getOUG_FormatStart()
format1 += 'i12f'
#print "format1 = ",format1
is_magnitude_phase = self.is_magnitude_phase()
while len(self.data) >= 56: # 14*4
eData = self.data[0:56]
self.data = self.data[56:]
#print "len(data) = ",len(eData)
out = unpack(format1, eData)
(eid, gridType, txr, tyr, tzr, rxr, ryr, rzr, txi, tyi, tzi, rxi,
ryi, rzi) = out
if is_magnitude_phase:
tx = polar_to_real_imag(txr, txi)
rx = polar_to_real_imag(rxr, rxi)
ty = polar_to_real_imag(tyr, tyi)
ry = polar_to_real_imag(ryr, ryi)
tz = polar_to_real_imag(tzr, tzi)
rz = polar_to_real_imag(rzr, rzi)
else:
tx = complex(txr, txi)
rx = complex(rxr, rxi)
ty = complex(tyr, tyi)
ry = complex(ryr, ryi)
tz = complex(tzr, tzi)
rz = complex(rzr, rzi)
eid2 = extract(eid, dt)
#print "eType=%s" %(eType)
dataIn = [eid2, gridType, tx, ty, tz, rx, ry, rz]
#print "%s" %(self.get_element_type(self.element_type)),dataIn
#eid = self.obj.add_new_eid(out)
self.obj.add(dt, dataIn)
def OEF_PentaPressure_alt(self): # 76-CHEXA_PR,77-CPENTA_PR,78-CTETRA_PR
dt = self.nonlinear_factor
(format1, extract) = self.getOEF_FormatStart()
format1 += '8s13f'
is_magnitude_phase = self.is_magnitude_phase()
while len(self.data) >= 64: # 16*4
eData = self.data[0:64]
self.data = self.data[64:]
#print "len(data) = ",len(eData)
out = unpack(format1, eData)
(eid, eName, axr, ayr, azr, vxr, vyr, vzr, pressure,
axi, ayi, azi, vxi, vyi, vzi) = out
eid2 = extract(eid, dt)
eName = eName.decode('utf-8').strip()
#print "eType=%s" %(eType)
if is_magnitude_phase:
ax = polar_to_real_imag(axr, axi)
vx = polar_to_real_imag(vxr, vxi)
ay = polar_to_real_imag(ayr, ayi)
vy = polar_to_real_imag(vyr, vyi)
az = polar_to_real_imag(azr, azi)
vz = polar_to_real_imag(vzr, vzi)
else:
ax = complex(axr, axi)
vx = complex(vxr, vxi)
ay = complex(ayr, ayi)
vy = complex(vyr, vyi)
az = complex(azr, azi)
vz = complex(vzr, vzi)
dataIn = [eid2, eName, ax, ay, az, vx, vy, vz, pressure]
#print "%s" %(self.get_element_type(self.element_type)),dataIn
#eid = self.obj.add_new_eid(out)
self.obj.add(dt, dataIn)
def OEF_CBush_alt(self): # 102-CBUSH
dt = self.nonlinear_factor
(format1, extract) = self.getOEF_FormatStart()
format1 += '12f'
is_magnitude_phase = self.is_magnitude_phase()
while len(self.data) >= 52: # 13*4
eData = self.data[0:52]
self.data = self.data[52:]
#print "len(data) = ",len(eData)
out = unpack(format1, eData)
(eid, fxr, fyr, fzr, mxr, myr, mzr,
fxi, fyi, fzi, mxi, myi, mzi) = out
eid2 = extract(eid, dt)
#print "eType=%s" %(eType)
if is_magnitude_phase:
fx = polar_to_real_imag(fxr, fxi)
mx = polar_to_real_imag(mxr, mxi)
fy = polar_to_real_imag(fyr, fyi)
my = polar_to_real_imag(myr, myi)
fz = polar_to_real_imag(fzr, fzi)
mz = polar_to_real_imag(mzr, mzi)
else:
fx = complex(fxr, fxi)
mx = complex(mxr, mxi)
fy = complex(fyr, fyi)
my = complex(myr, myi)
fz = complex(fzr, fzi)
mz = complex(mzr, mzi)
dataIn = [eid2, fx, fy, fz, mx, my, mz]
#print "%s" %(self.get_element_type(self.element_type)),dataIn
#eid = self.obj.add_new_eid(out)
self.obj.add(dt, dataIn)
def OES_CBUSH_102_alt(self):
dt = self.nonlinear_factor
(format1, extract) = self.getOUG_FormatStart()
is_magnitude_phase = self.is_magnitude_phase()
assert self.num_wide == 13, "num_wide=%s not 14" % (self.num_wide)
nTotal = 52 # 4*13
format1 += '12f'
while len(self.data) >= nTotal:
eData = self.data[0:nTotal]
self.data = self.data[nTotal:]
out = unpack(format1, eData) # num_wide=25
(eid, txr, tyr, tzr, rxr, ryr, rzr, txi, tyi, tzi, rxi, ryi,
rzi) = out
eid = extract(eid, dt)
if is_magnitude_phase:
tx = polar_to_real_imag(txr, txi)
ty = polar_to_real_imag(tyr, tyi)
tz = polar_to_real_imag(tzr, tzi)
rx = polar_to_real_imag(rxr, rxi)
ry = polar_to_real_imag(ryr, ryi)
rz = polar_to_real_imag(rzr, rzi)
else:
tx = complex(txr, txi)
ty = complex(tyr, tyi)
tz = complex(tzr, tzi)
rx = complex(rxr, rxi)
ry = complex(ryr, ryi)
rz = complex(rzr, rzi)
#data = (eid, tx, ty, tz, rx, ry, rz)
self.obj.add_new_eid(self.element_type, dt, eid, tx, ty, tz, rx,
ry, rz)
def OES_CBUSH_102_alt(self):
dt = self.nonlinear_factor
(format1, extract) = self.getOUG_FormatStart()
is_magnitude_phase = self.is_magnitude_phase()
assert self.num_wide == 13, "num_wide=%s not 14" % (self.num_wide)
nTotal = 52 # 4*13
format1 += '12f'
while len(self.data) >= nTotal:
eData = self.data[0:nTotal]
self.data = self.data[nTotal:]
out = unpack(format1, eData) # num_wide=25
(eid, txr,tyr,tzr,rxr,ryr,rzr,
txi,tyi,tzi,rxi,ryi,rzi) = out
eid = extract(eid, dt)
if is_magnitude_phase:
tx = polar_to_real_imag(txr, txi)
ty = polar_to_real_imag(tyr, tyi)
tz = polar_to_real_imag(tzr, tzi)
rx = polar_to_real_imag(rxr, rxi)
ry = polar_to_real_imag(ryr, ryi)
rz = polar_to_real_imag(rzr, rzi)
else:
tx = complex(txr, txi)
ty = complex(tyr, tyi)
tz = complex(tzr, tzi)
rx = complex(rxr, rxi)
ry = complex(ryr, ryi)
rz = complex(rzr, rzi)
#data = (eid, tx, ty, tz, rx, ry, rz)
self.obj.add_new_eid(self.element_type, dt, eid, tx, ty, tz, rx, ry, rz)
def _read_grid_point_forces(self, data, ndata):
"""
table_code = 19
"""
dt = self.nonlinear_factor
n = 0
is_magnitude_phase = self.is_magnitude_phase()
if self.thermal == 0:
result_name = 'grid_point_forces'
if self._results.is_not_saved(result_name):
return ndata
self._results._found_result(result_name)
slot = getattr(self, result_name)
if self.num_wide == 10:
ntotal = 40
nnodes = ndata // ntotal
obj_vector_real = RealGridPointForcesArray
auto_return, is_vectorized = self._create_ntotal_object(
nnodes, result_name, slot, obj_vector_real)
if auto_return:
return nnodes * self.num_wide * 4
obj = self.obj
if self.is_debug_file:
self.binary_debug.write(' GPFORCE\n')
self.binary_debug.write(' [cap, gpforce1, gpforce2, ..., cap]\n')
self.binary_debug.write(' cap = %i # assume 1 cap when there could have been multiple\n' % len(data))
self.binary_debug.write(' gpforce1 = [nid_device, eid, elem_name, f1, f2, f3, m1, m2, m3]\n')
self.binary_debug.write(' nnodes=%i\n' % nnodes)
if self.use_vector and is_vectorized:
# self.itime = 0
# self.ielement = 0
# self.itotal = 0
#self.ntimes = 0
#self.nelements = 0
n = nnodes * self.num_wide * 4
istart = obj.itotal
iend = istart + nnodes
obj._times[obj.itime] = dt
itime = obj.itime
if itime == 0 or obj.is_unique:
ints = fromstring(data, dtype=self.idtype).reshape(nnodes, 10)
nids = ints[:, 0] // 10
eids = ints[:, 1]
strings = fromstring(data, dtype=self._endian + 'S8').reshape(nnodes, 5)#[:, 2:3]
if obj.is_unique:
obj.node_element[itime, istart:iend, 0] = nids
obj.node_element[itime, istart:iend, 1] = eids
obj.element_names[itime, istart:iend] = strings[:, 1]
else:
obj.node_element[istart:iend, 0] = nids
obj.node_element[istart:iend, 1] = eids
obj.element_names[istart:iend] = strings[:, 1]
floats = fromstring(data, dtype=self.fdtype).reshape(nnodes, 10)
#[f1, f2, f3, m1, m2, m3]
obj.data[itime, istart:iend, :] = floats[:, 4:]
#obj._times[obj.itime] = dt
#obj.itotal = itotal2
if self.is_debug_file:
if itime != 0:
ints = fromstring(data, dtype=self.idtype).reshape(nnodes, 10)
strings = fromstring(data, dtype=self._endian + 'S8').reshape(nnodes, 5)
for i in range(iend - istart):
self.binary_debug.write(' nid=%s - (%s, %s, %s, %s, %s, %s, %s, %s, %s)\n' % (
ints[i, 0] // 10,
ints[i, 0], ints[i, 1], strings[i, 1],
floats[i, 4], floats[i, 5], floats[i, 6],
floats[i, 7], floats[i, 8], floats[i, 9], ))
else:
s = Struct(b(self._endian + 'ii8s6f'))
for i in range(nnodes):
edata = data[n:n+ntotal]
out = s.unpack(edata)
(nid_device, eid, elem_name, f1, f2, f3, m1, m2, m3) = out
nid = nid_device // 10
elem_name = elem_name.strip()
if self.is_debug_file:
self.binary_debug.write(' nid=%s - %s\n' % (nid, str(out)))
self.obj.add(dt, nid, eid, elem_name, f1, f2, f3, m1, m2, m3)
n += ntotal
elif self.num_wide == 16:
# complex
ntotal = 64
nnodes = ndata // ntotal
obj_vector_real = ComplexGridPointForcesArray
auto_return, is_vectorized = self._create_ntotal_object(
nnodes, result_name, slot, obj_vector_real)
if auto_return:
return nnodes * self.num_wide * 4
obj = self.obj
is_vectorized = False
if self.use_vector and is_vectorized:
# self.itime = 0
# self.ielement = 0
# self.itotal = 0
#self.ntimes = 0
#self.nelements = 0
n = nnodes * self.num_wide * 4
istart = obj.itotal
iend = istart + nnodes
obj._times[obj.itime] = dt
if obj.itime == 0:
ints = fromstring(data, dtype=self.idtype).reshape(nnodes, 16)
nids = ints[:, 0] // 10
eids = ints[:, 1]
obj.node_element[istart:iend, 0] = nids
obj.node_element[istart:iend, 1] = eids
strings = fromstring(data, dtype=self._endian + 'S8').reshape(nnodes, 8)
obj.element_names[istart:iend] = strings[:, 1]
floats = fromstring(data, dtype=self.fdtype).reshape(nnodes, 16)
#[f1, f2, f3, m1, m2, m3]
obj.data[obj.itime, istart:iend, :] = floats[:, 4:]
else:
s = Struct(b(self._endian + 'ii8s12f'))
#if self.is_debug_file:
#self.binary_debug.write(' GPFORCE\n')
#self.binary_debug.write(' [cap, gpforce1, gpforce2, ..., cap]\n')
#self.binary_debug.write(' cap = %i # assume 1 cap when there could have been multiple\n' % len(data))
#self.binary_debug.write(' gpforce1 = [nid_device, eid, elem_name, f1, f2, f3, m1, m2, m3]\n')
#self.binary_debug.write(' nnodes=%i\n' % nnodes)
for i in range(nnodes):
edata = data[n:n+ntotal]
out = s.unpack(edata)
(nid_device, eid, elem_name,
f1r, f2r, f3r, m1r, m2r, m3r,
f1i, f2i, f3i, m1i, m2i, m3i) = out
nid = nid_device // 10
elem_name = elem_name.strip()
if self.is_debug_file:
self.binary_debug.write(' nid=%s - %s\n' % (nid, str(out)))
if is_magnitude_phase:
f1 = polar_to_real_imag(f1r, f1i)
f2 = polar_to_real_imag(f2r, f2i)
f3 = polar_to_real_imag(f3r, f3i)
m1 = polar_to_real_imag(m1r, m1i)
m2 = polar_to_real_imag(m2r, m2i)
m3 = polar_to_real_imag(m3r, m3i)
else:
f1 = complex(f1r, f1i)
f2 = complex(f2r, f2i)
f3 = complex(f3r, f3i)
m1 = complex(m1r, m1i)
m2 = complex(m2r, m2i)
m3 = complex(m3r, m3i)
self.obj.add_sort1(dt, nid, eid, elem_name, f1, f2, f3, m1, m2, m3)
n += ntotal
else:
raise NotImplementedError(self.code_information())
#msg = self.code_information()
#return self._not_implemented_or_skip(data, ndata, msg)
#complex_obj = complexGridPointForcesObject
#self._read_table(data, storage_obj, real_obj, complex_obj, 'node')
#elif self.thermal == 1:
#result_name = 'thermal_load_vectors'
#storage_obj = self.thermal_load_vectors
#real_obj = ThermalLoadVectorObject
#complex_obj = None
#self._read_table(data, storage_obj, real_obj, complex_obj, 'node')
else:
raise NotImplementedError(self.code_information())
#msg = self.code_information()
#return self._not_implemented_or_skip(data, ndata, msg)
return n
def OEF_Plate2_alt(self): # 64-CQUAD8,70-CTRIAR,75-CTRIA6,82-CQUAD8,144-CQUAD4-bilinear
dt = self.nonlinear_factor
(format1, extract) = self.getOEF_FormatStart()
format1 += '4s'
is_magnitude_phase = self.is_magnitude_phase()
if self.element_type in [70, 75]: # CTRIAR,CTRIA6
nNodes = 4
elif self.element_type in [64, 82, 144]: # CQUAD8,CQUADR,CQUAD4-bilinear
nNodes = 5
else:
raise NotImplementedError(self.code_information())
allFormat = '17f'
nTotal = 8 + nNodes * 68
while len(self.data) >= nTotal:
eData = self.data[0:76]
self.data = self.data[76:]
#print self.print_block(eData)
#print "len(data) = ",len(eData)
out = unpack(format1 + allFormat, eData)
(eid, term, nid, mxr, myr, mxyr, bmxr, bmyr, bmxyr, txr, tyr,
mxi, myi, mxyi, bmxi, bmyi, bmxyi, txi, tyi) = out
#term = 'CEN\'
#print "eType=%s" %(eType)
eid2 = extract(eid, dt)
if is_magnitude_phase:
mx = polar_to_real_imag(mxr, mxi)
my = polar_to_real_imag(myr, myi)
mxy = polar_to_real_imag(mxyr, mxyi)
bmx = polar_to_real_imag(bmxr, bmxi)
bmy = polar_to_real_imag(bmyr, bmyi)
bmxy = polar_to_real_imag(bmxyr, bmxyi)
tx = polar_to_real_imag(txr, txi)
ty = polar_to_real_imag(tyr, tyi)
else:
mx = complex(mxr, mxi)
my = complex(myr, myi)
mxy = complex(mxyr, mxyi)
bmx = complex(bmxr, bmxi)
bmy = complex(bmyr, bmyi)
bmxy = complex(bmxyr, bmxyi)
tx = complex(txr, txi)
ty = complex(tyr, tyi)
dataIn = [term, nid, mx, my, mxy, bmx, bmy, bmxy, tx, ty]
#print "%s" %(self.get_element_type(self.element_type)),dataIn
self.obj.addNewElement(eid2, dt, dataIn)
for i in range(nNodes - 1): # .. todo:: fix crash...
eData = self.data[0:68]
self.data = self.data[68:]
out = unpack(allFormat, eData)
(nid, mxr, myr, mxyr, bmxr, bmyr, bmxyr, txr, tyr,
mxi, myi, mxyi, bmxi, bmyi, bmxyi, txi, tyi) = out
if is_magnitude_phase:
mx = polar_to_real_imag(mxr, mxi)
my = polar_to_real_imag(myr, myi)
mxy = polar_to_real_imag(mxyr, mxyi)
bmx = polar_to_real_imag(bmxr, bmxi)
bmy = polar_to_real_imag(bmyr, bmyi)
bmxy = polar_to_real_imag(bmxyr, bmxyi)
tx = polar_to_real_imag(txr, txi)
ty = polar_to_real_imag(tyr, tyi)
else:
mx = complex(mxr, mxi)
my = complex(myr, myi)
mxy = complex(mxyr, mxyi)
bmx = complex(bmxr, bmxi)
bmy = complex(bmyr, bmyi)
bmxy = complex(bmxyr, bmxyi)
tx = complex(txr, txi)
ty = complex(tyr, tyi)
dataIn = [nid, mx, my, mxy, bmx, bmy, bmxy, tx, ty]
#print "***%s " %(self.get_element_type(self.element_type)),dataIn
self.obj.add(eid2, dt, dataIn)
def OEF_Bend_alt(self): # 69-CBEND
dt = self.nonlinear_factor
(format1, extract) = self.getOEF_FormatStart()
format1 += 'i25f'
is_magnitude_phase = self.is_magnitude_phase()
while len(self.data) >= 108: # 27*4
eData = self.data[0:108]
self.data = self.data[108:]
#print "len(data) = ",len(eData)
out = unpack(format1, eData)
(eid, nidA, bm1Ar, bm2Ar, ts1Ar, ts2Ar, afAr, trqAr,
bm1Ai, bm2Ai, ts1Ai, ts2Ai, afAi, trqAi,
nidB, bm1Br, bm2Br, ts1Br, ts2Br, afBr, trqBr,
bm1Bi, bm2Bi, ts1Bi, ts2Bi, afBi, trqBi) = out
eid2 = extract(eid, dt)
#print "eType=%s" %(eType)
if is_magnitude_phase:
bm1A = polar_to_real_imag(bm1Ar, bm1Ai)
bm1B = polar_to_real_imag(
bm1Br, bm1Bi)
bm2A = polar_to_real_imag(bm2Ar, bm2Ai)
bm2B = polar_to_real_imag(
bm2Br, bm2Bi)
ts1A = polar_to_real_imag(ts1Ar, ts1Ai)
ts1B = polar_to_real_imag(
ts1Br, ts1Bi)
ts2A = polar_to_real_imag(ts2Ar, ts2Ai)
ts2B = polar_to_real_imag(
ts2Br, ts2Bi)
afA = polar_to_real_imag(afAr,
afAi)
afB = polar_to_real_imag(afBr, afBi)
trqA = polar_to_real_imag(trqAr, trqAi)
trqB = polar_to_real_imag(
trqBr, trqBi)
else:
bm1A = complex(bm1Ar, bm1Ai)
bm1B = complex(bm1Br, bm1Bi)
bm2A = complex(bm2Ar, bm2Ai)
bm2B = complex(bm2Br, bm2Bi)
ts1A = complex(ts1Ar, ts1Ai)
ts1B = complex(ts1Br, ts1Bi)
ts2A = complex(ts2Ar, ts2Ai)
ts2B = complex(ts2Br, ts2Bi)
afA = complex(afAr, afAi)
afB = complex(afBr, afBi)
trqA = complex(trqAr, trqAi)
trqB = complex(trqBr, trqBi)
dataIn = [eid2, nidA, bm1A, bm2A, ts1A, ts2A, afA, trqA,
nidB, bm1B, bm2B, ts1B, ts2B, afB, trqB]
#print "%s" %(self.get_element_type(self.element_type)),dataIn
#eid = self.obj.add_new_eid(out)
self.obj.add(dt, dataIn)
def OEF_Force_VU_alt(self): # 191-VUBEAM
dt = self.nonlinear_factor
(format1, extract) = self.getOEF_FormatStart()
format1 += '2i4s'
is_magnitude_phase = self.is_magnitude_phase()
if self.element_type in [191]:
nNodes = 2
else:
raise NotImplementedError(self.code_information())
formatAll = 'i13f'
n = 16 + 56 * nNodes
while len(self.data) >= n:
eData = self.data[0:16] # 8*4
self.data = self.data[16:]
#print "len(data) = ",len(eData)
out = unpack(format1, eData)
(eid, parent, coord, icord) = out
eid2 = extract(eid, dt)
dataIn = [eid2, parent, coord, icord]
forces = []
for i in range(nNodes):
eData = self.data[0:56] # 14*4
self.data = self.data[56:]
#print "i=%s len(data)=%s" %(i,len(eData))
out = unpack(formatAll, eData)
[vugrid, posit, forceXr, shearYr, shearZr, torsionr, bendingYr, bendingZr,
forceXi, shearYi, shearZi, torsioni, bendingYi, bendingZi] = out
if is_magnitude_phase:
forceX = polar_to_real_imag(forceXr, forceXi)
shearY = polar_to_real_imag(shearYr, shearYi)
shearZ = polar_to_real_imag(shearZr, shearZi)
torsion = polar_to_real_imag(torsionr, torsioni)
bendingY = polar_to_real_imag(bendingYr, bendingYi)
bendingZ = polar_to_real_imag(bendingZr, bendingZi)
else:
forceX = complex(forceXr, forceXi)
shearY = complex(shearYr, shearYi)
shearZ = complex(shearZr, shearZi)
torsion = complex(torsionr, torsioni)
bendingY = complex(bendingYr, bendingYi)
bendingZ = complex(bendingZr, bendingZi)
out2 = [vugrid, posit, forceX, shearY,
shearZ, torsion, bendingY, bendingZ]
forces.append(out2)
dataIn.append(forces)
#eType = a+b+c+d+e+f+g+h
#print "eType=%s" %(eType)
#dataIn = [vugrid,posit,forceX,shearY,shearZ,torsion,bendY,bendZ]
#print "force %s" %(self.get_element_type(self.element_type)),dataIn
#eid = self.obj.add_new_eid(out)
self.obj.add(nNodes, dt, dataIn)
def OEF_Force_VUTRIA_alt(self): # 189-VUQUAD,190-VUTRIA
dt = self.nonlinear_factor
(format1, extract) = self.getOEF_FormatStart()
format1 += 'ii4sii'
is_magnitude_phase = self.is_magnitude_phase()
if self.element_type in [189]: # VUQUAD
nNodes = 4
elif self.element_type in [190]: # VUTRIA
nNodes = 3
else:
raise NotImplementedError(self.code_information())
formatAll = 'i3f3i5fi3f3i5fi'
n = 24 + 100 * nNodes
while len(self.data) >= n:
eData = self.data[0:24] # 6*4
self.data = self.data[24:]
#print "len(data) = ",len(eData)
out = unpack(format1, eData)
(eid, parent, coord, icord, theta, _) = out
eid2 = extract(eid, dt)
dataIn = [eid2, parent, coord, icord, theta]
forces = []
for i in range(nNodes):
eData = self.data[0:100] # 13*4
self.data = self.data[100:]
#print "i=%s len(data)=%s" %(i,len(eData))
out = unpack(formatAll, eData)
[vugrid, mfxr, mfyr, mfxyr, a, b, c, bmxr, bmyr, bmxyr, syzr, szxr, d,
mfxi, mfyi, mfxyi, a, b, c, bmxi, bmyi, bmxyi, syzi, szxi, d] = out
if is_magnitude_phase:
mfx = polar_to_real_imag(mfxr, mfxi)
mfy = polar_to_real_imag(mfyr, mfyi)
mfxy = polar_to_real_imag(mfxyr, mfxyi)
bmx = polar_to_real_imag(bmxr, bmxi)
bmy = polar_to_real_imag(bmyr, bmyi)
bmxy = polar_to_real_imag(bmxyr, bmxyi)
syz = polar_to_real_imag(syzr, syzi)
szx = polar_to_real_imag(szxr, szxi)
else:
mfx = complex(mfxr, mfxi)
mfy = complex(mfyr, mfyi)
mfxy = complex(mfxyr, mfxyi)
bmx = complex(bmxr, bmxi)
bmy = complex(bmyr, bmyi)
bmxy = complex(bmxyr, bmxyi)
syz = complex(syzr, syzi)
szx = complex(szxr, szxi)
out2 = [vugrid, mfx, mfy, mfxy, bmx, bmy, bmxy, syz, szx]
forces.append(out2)
dataIn.append(forces)
#print "eType=%s" %(eType)
#dataIn = [vugrid,mfxr,mfyr,mfxyr,bmxr,bmyr,bmxyr,syzr,szxr,
#mfxi,mfyi,mfxyi,bmxi,bmyi,bmxyi,syzi,szxi]
#print "force %s" %(self.get_element_type(self.element_type)),dataIn
#eid = self.obj.add_new_eid(out)
self.obj.add(nNodes, dt, dataIn)
def OES_CQUAD4_144_alt(self):
"""
GRID-ID DISTANCE,NORMAL-X,NORMAL-Y,SHEAR-XY,ANGLE,MAJOR MINOR,VONMISES
"""
if self.make_op2_debug:
self.op2Debug.write('---CQUAD4_144---\n')
#self.print_section(20)
#term = data[0:4] CEN/
#data = data[4:]
#print "*****"
#self.print_block(self.data)
#assert self.num_wide==87,'invalid num_wide...num_wide=%s' %(self.num_wide)
#if self.num_wide==87: # 2+(17-1)*5 = 87 -> 87*4 = 348
if self.element_type == 144: # CQUAD4
nTotal = 308 # 2+15*5 = 77 -> 87*4 = 308
nNodes = 4 # centroid + 4 corner points
eType = 'CQUAD4'
elif self.element_type == 64: # CQUAD8 - done
nTotal = 308 # 2+15*5 = 77 -> 77*4 = 308
nNodes = 4 # centroid + 4 corner points
eType = 'CQUAD8'
elif self.element_type == 82: # CQUADR
nTotal = 308 # 2+15*5 = 77 -> 87*4 = 308
nNodes = 4 # centroid + 4 corner points
eType = 'CQUAD4' # TODO write the word CQUADR
elif self.element_type == 75: # CTRIA6
nTotal = 248 # 2+15*3 = 62 -> 62*4 = 248
nNodes = 3 # centroid + 3 corner points
eType = 'CTRIA6'
elif self.element_type == 70: # CTRIAR
nTotal = 248 # 2+15*4 = 62 -> 62*4 = 248
nNodes = 3 # centroid + 3 corner points
eType = 'CTRIAR' # TODO write the word CTRIAR
else:
raise RuntimeError('element_type=%s nTotal not defined...' %
(self.element_type))
assert nTotal == self.num_wide * 4, 'eType=%s num_wide*4=%s not nTotal=%s' % (
self.element_type, self.num_wide * 4, nTotal)
dt = self.nonlinear_factor
(format1, extract) = self.getOUG_FormatStart()
format1 += '14f'
is_magnitude_phase = self.is_magnitude_phase()
while len(self.data) >= nTotal:
(eid, _) = unpack('i4s', self.data[0:8])
self.data = self.data[8:] # 2
eid = extract(eid, dt)
eData = self.data[0:60] # 4*15
self.data = self.data[60:]
out = unpack(format1, eData) # len=15*4
if self.make_op2_debug:
self.op2Debug.write('%s\n' % (str(out)))
(grid, fd1, sx1r, sx1i, sy1r, sy1i, txy1r, txy1i, fd2, sx2r, sx2i,
sy2r, sy2i, txy2r, txy2i) = out
grid = 'C'
if is_magnitude_phase:
sx1 = polar_to_real_imag(sx1r, sx1i)
sy1 = polar_to_real_imag(sy1r, sy1i)
sx2 = polar_to_real_imag(sx2r, sx2i)
sy2 = polar_to_real_imag(sy2r, sy2i)
txy1 = polar_to_real_imag(txy1r, txy1i)
txy2 = polar_to_real_imag(txy2r, txy2i)
else:
sx1 = complex(sx1r, sx1i)
sy1 = complex(sy1r, sy1i)
sx2 = complex(sx2r, sx2i)
sy2 = complex(sy2r, sy2i)
txy1 = complex(txy1r, txy1i)
txy2 = complex(txy2r, txy2i)
self.obj.add_new_eid(eType, dt, eid, grid, fd1, sx1, sy1, txy1)
self.obj.add(dt, eid, grid, fd2, sx2, sy2, txy2)
for nodeID in range(nNodes): # nodes pts
eData = self.data[0:60] # 4*15=60
self.data = self.data[60:]
out = unpack('i14f', eData)
if self.make_op2_debug:
self.op2Debug.write('%s\n' % (str(out)))
(grid, fd1, sx1r, sx1i, sy1r, sy1i, txy1r, txy1i, fd2, sx2r,
sx2i, sy2r, sy2i, txy2r, txy2i) = out
if is_magnitude_phase:
sx1 = polar_to_real_imag(sx1r, sx1i)
sx2 = polar_to_real_imag(sx2r, sx2i)
sy1 = polar_to_real_imag(sy1r, sy1i)
sy2 = polar_to_real_imag(sy2r, sy2i)
txy1 = polar_to_real_imag(txy1r, txy1i)
txy2 = polar_to_real_imag(txy2r, txy2i)
else:
sx1 = complex(sx1r, sx1i)
sx2 = complex(sx2r, sx2i)
sy1 = complex(sy1r, sy1i)
sy2 = complex(sy2r, sy2i)
txy1 = complex(txy1r, txy1i)
txy2 = complex(txy2r, txy2i)
#print "eid=%i grid=%i fd1=%i sx1=%i sy1=%i txy1=%i" %(eid,grid,fd1,sx1,sy1,txy1)
#print " fd2=%i sx2=%i sy2=%i txy2=%i\n" %(fd2,sx2,sy2,txy2)
#print "len(data) = ",len(self.data)
#self.print_block(self.data)
self.obj.addNewNode(dt, eid, grid, fd1, sx1, sy1, txy1)
self.obj.add(dt, eid, grid, fd2, sx2, sy2, txy2)
def OES_CQUAD4_33_alt(self):
"""
GRID-ID DISTANCE,NORMAL-X,NORMAL-Y,SHEAR-XY
"""
dt = self.nonlinear_factor
(format1, extract) = self.getOUG_FormatStart()
format1 += '14f'
is_magnitude_phase = self.is_magnitude_phase()
nNodes = 0 # centroid + 4 corner points
#self.print_section(20)
#term = data[0:4] CEN/
#data = data[4:]
#print "*****"
#self.print_block(self.data)
#print "self.num_wide = ",self.num_wide
#print "len(data) = ",len(self.data)
assert self.num_wide == 15, 'invalid num_wide...num_wide=%s' % (
self.num_wide)
while len(self.data) >= 60: # 2+15*5 = 77 -> 77*4 = 308
#print self.print_block(self.data[0:100])
#(eid,) = unpack(b'i',self.data[0:4])
#print "abcd=",abcd
#self.data = self.data[8:] # 2
eData = self.data[0:60] # 4*15=60
self.data = self.data[60:]
out = unpack(format1, eData) # 15
if self.make_op2_debug:
self.op2Debug.write('%s\n' % (str(out)))
(eid, fd1, sx1r, sx1i, sy1r, sy1i, txy1r, txy1i,
fd2, sx2r, sx2i, sy2r, sy2i, txy2r, txy2i) = out
if is_magnitude_phase:
sx1 = polar_to_real_imag(sx1r, sx1i)
sx2 = polar_to_real_imag(sx2r, sx2i)
sy1 = polar_to_real_imag(sy1r, sy1i)
sy2 = polar_to_real_imag(sy2r, sy2i)
txy1 = polar_to_real_imag(txy1r, txy1i)
txy2 = polar_to_real_imag(txy2r, txy2i)
else:
sx1 = complex(sx1r, sx1i)
sx2 = complex(sx2r, sx2i)
sy1 = complex(sy1r, sy1i)
sy2 = complex(sy2r, sy2i)
txy1 = complex(txy1r, txy1i)
txy2 = complex(txy2r, txy2i)
eid = extract(eid, dt)
#print "eid=%i grid=%s fd1=%-3.1f sx1=%s sy1=%s txy1=%s" %(eid,'C',fd1,sx1,sy1,txy1)
#print " fd2=%-3.1f sx2=%s sy2=%s txy2=%s\n" %(fd2,sx2,sy2,txy2)
#print "nNodes = ",nNodes
self.obj.add_new_eid('CQUAD4', dt, eid, 'C', fd1, sx1, sy1, txy1)
self.obj.add(dt, eid, 'C', fd2, sx2, sy2, txy2)
for nodeID in range(nNodes): # nodes pts
eData = self.data[0:60] # 4*15=60
self.data = self.data[60:]
out = unpack('i14f', eData[0:60])
if self.make_op2_debug:
self.op2Debug.write('%s\n' % (str(out)))
(grid, fd1, sx1r, sx1i, sy1r, sy1i, txy1r, txy1i,
fd2, sx2r, sx2i, sy2r, sy2i, txy2r, txy2i) = out
if is_magnitude_phase:
sx1 = polar_to_real_imag(sx1r, sx1i)
sx2 = polar_to_real_imag(sx2r, sx2i)
sy1 = polar_to_real_imag(sy1r, sy1i)
sy2 = polar_to_real_imag(sy2r, sy2i)
txy1 = polar_to_real_imag(txy1r, txy1i)
txy2 = polar_to_real_imag(txy2r, txy2i)
else:
sx1 = complex(sx1r, sx1i)
sx2 = complex(sx2r, sx2i)
sy1 = complex(sy1r, sy1i)
sy2 = complex(sy2r, sy2i)
txy1 = complex(txy1r, txy1i)
txy2 = complex(txy2r, txy2i)
#print "eid=%i grid=%i fd1=%i sx1=%i sy1=%i txy1=%i\n" %(eid,grid,fd1,sx1,sy1,txy1)
#print " fd2=%i sx2=%i sy2=%i txy2=%i\n" %(fd2,sx2,sy2,txy2)
#print "len(data) = ",len(self.data)
#self.print_block(self.data)
self.obj.addNewNode(dt, eid, grid, fd1, sx1, sy1, txy1)
self.obj.add(dt, eid, grid, fd2, sx2, sy2, txy2)
def OES_CQUAD4_33_alt(self):
"""
GRID-ID DISTANCE,NORMAL-X,NORMAL-Y,SHEAR-XY
"""
dt = self.nonlinear_factor
(format1, extract) = self.getOUG_FormatStart()
format1 += '14f'
is_magnitude_phase = self.is_magnitude_phase()
nNodes = 0 # centroid + 4 corner points
#self.print_section(20)
#term = data[0:4] CEN/
#data = data[4:]
#print "*****"
#self.print_block(self.data)
#print "self.num_wide = ",self.num_wide
#print "len(data) = ",len(self.data)
assert self.num_wide == 15, 'invalid num_wide...num_wide=%s' % (
self.num_wide)
while len(self.data) >= 60: # 2+15*5 = 77 -> 77*4 = 308
#print self.print_block(self.data[0:100])
#(eid,) = unpack(b'i',self.data[0:4])
#print "abcd=",abcd
#self.data = self.data[8:] # 2
eData = self.data[0:60] # 4*15=60
self.data = self.data[60:]
out = unpack(format1, eData) # 15
if self.make_op2_debug:
self.op2Debug.write('%s\n' % (str(out)))
(eid, fd1, sx1r, sx1i, sy1r, sy1i, txy1r, txy1i, fd2, sx2r, sx2i,
sy2r, sy2i, txy2r, txy2i) = out
if is_magnitude_phase:
sx1 = polar_to_real_imag(sx1r, sx1i)
sx2 = polar_to_real_imag(sx2r, sx2i)
sy1 = polar_to_real_imag(sy1r, sy1i)
sy2 = polar_to_real_imag(sy2r, sy2i)
txy1 = polar_to_real_imag(txy1r, txy1i)
txy2 = polar_to_real_imag(txy2r, txy2i)
else:
sx1 = complex(sx1r, sx1i)
sx2 = complex(sx2r, sx2i)
sy1 = complex(sy1r, sy1i)
sy2 = complex(sy2r, sy2i)
txy1 = complex(txy1r, txy1i)
txy2 = complex(txy2r, txy2i)
eid = extract(eid, dt)
#print "eid=%i grid=%s fd1=%-3.1f sx1=%s sy1=%s txy1=%s" %(eid,'C',fd1,sx1,sy1,txy1)
#print " fd2=%-3.1f sx2=%s sy2=%s txy2=%s\n" %(fd2,sx2,sy2,txy2)
#print "nNodes = ",nNodes
self.obj.add_new_eid('CQUAD4', dt, eid, 'C', fd1, sx1, sy1, txy1)
self.obj.add(dt, eid, 'C', fd2, sx2, sy2, txy2)
for nodeID in range(nNodes): # nodes pts
eData = self.data[0:60] # 4*15=60
self.data = self.data[60:]
out = unpack('i14f', eData[0:60])
if self.make_op2_debug:
self.op2Debug.write('%s\n' % (str(out)))
(grid, fd1, sx1r, sx1i, sy1r, sy1i, txy1r, txy1i, fd2, sx2r,
sx2i, sy2r, sy2i, txy2r, txy2i) = out
if is_magnitude_phase:
sx1 = polar_to_real_imag(sx1r, sx1i)
sx2 = polar_to_real_imag(sx2r, sx2i)
sy1 = polar_to_real_imag(sy1r, sy1i)
sy2 = polar_to_real_imag(sy2r, sy2i)
txy1 = polar_to_real_imag(txy1r, txy1i)
txy2 = polar_to_real_imag(txy2r, txy2i)
else:
sx1 = complex(sx1r, sx1i)
sx2 = complex(sx2r, sx2i)
sy1 = complex(sy1r, sy1i)
sy2 = complex(sy2r, sy2i)
txy1 = complex(txy1r, txy1i)
txy2 = complex(txy2r, txy2i)
#print "eid=%i grid=%i fd1=%i sx1=%i sy1=%i txy1=%i\n" %(eid,grid,fd1,sx1,sy1,txy1)
#print " fd2=%i sx2=%i sy2=%i txy2=%i\n" %(fd2,sx2,sy2,txy2)
#print "len(data) = ",len(self.data)
#self.print_block(self.data)
self.obj.addNewNode(dt, eid, grid, fd1, sx1, sy1, txy1)
self.obj.add(dt, eid, grid, fd2, sx2, sy2, txy2)
def OES_CQUAD4_144_alt(self):
"""
GRID-ID DISTANCE,NORMAL-X,NORMAL-Y,SHEAR-XY,ANGLE,MAJOR MINOR,VONMISES
"""
if self.make_op2_debug:
self.op2Debug.write('---CQUAD4_144---\n')
#self.print_section(20)
#term = data[0:4] CEN/
#data = data[4:]
#print "*****"
#self.print_block(self.data)
#assert self.num_wide==87,'invalid num_wide...num_wide=%s' %(self.num_wide)
#if self.num_wide==87: # 2+(17-1)*5 = 87 -> 87*4 = 348
if self.element_type == 144: # CQUAD4
nTotal = 308 # 2+15*5 = 77 -> 87*4 = 308
nNodes = 4 # centroid + 4 corner points
eType = 'CQUAD4'
elif self.element_type == 64: # CQUAD8 - done
nTotal = 308 # 2+15*5 = 77 -> 77*4 = 308
nNodes = 4 # centroid + 4 corner points
eType = 'CQUAD8'
elif self.element_type == 82: # CQUADR
nTotal = 308 # 2+15*5 = 77 -> 87*4 = 308
nNodes = 4 # centroid + 4 corner points
eType = 'CQUAD4' # TODO write the word CQUADR
elif self.element_type == 75: # CTRIA6
nTotal = 248 # 2+15*3 = 62 -> 62*4 = 248
nNodes = 3 # centroid + 3 corner points
eType = 'CTRIA6'
elif self.element_type == 70: # CTRIAR
nTotal = 248 # 2+15*4 = 62 -> 62*4 = 248
nNodes = 3 # centroid + 3 corner points
eType = 'CTRIAR' # TODO write the word CTRIAR
else:
raise RuntimeError('element_type=%s nTotal not defined...' %
(self.element_type))
assert nTotal == self.num_wide * 4, 'eType=%s num_wide*4=%s not nTotal=%s' % (self.element_type, self.num_wide * 4, nTotal)
dt = self.nonlinear_factor
(format1, extract) = self.getOUG_FormatStart()
format1 += '14f'
is_magnitude_phase = self.is_magnitude_phase()
while len(self.data) >= nTotal:
(eid, _) = unpack('i4s', self.data[0:8])
self.data = self.data[8:] # 2
eid = extract(eid, dt)
eData = self.data[0:60] # 4*15
self.data = self.data[60:]
out = unpack(format1, eData) # len=15*4
if self.make_op2_debug:
self.op2Debug.write('%s\n' % (str(out)))
(grid, fd1, sx1r, sx1i, sy1r, sy1i, txy1r, txy1i,
fd2, sx2r, sx2i, sy2r, sy2i, txy2r, txy2i) = out
grid = 'C'
if is_magnitude_phase:
sx1 = polar_to_real_imag(sx1r, sx1i)
sy1 = polar_to_real_imag(
sy1r, sy1i)
sx2 = polar_to_real_imag(sx2r, sx2i)
sy2 = polar_to_real_imag(
sy2r, sy2i)
txy1 = polar_to_real_imag(txy1r, txy1i)
txy2 = polar_to_real_imag(
txy2r, txy2i)
else:
sx1 = complex(sx1r, sx1i)
sy1 = complex(sy1r, sy1i)
sx2 = complex(sx2r, sx2i)
sy2 = complex(sy2r, sy2i)
txy1 = complex(txy1r, txy1i)
txy2 = complex(txy2r, txy2i)
self.obj.add_new_eid(eType, dt, eid, grid, fd1, sx1, sy1, txy1)
self.obj.add(dt, eid, grid, fd2, sx2, sy2, txy2)
for nodeID in range(nNodes): # nodes pts
eData = self.data[0:60] # 4*15=60
self.data = self.data[60:]
out = unpack('i14f', eData)
if self.make_op2_debug:
self.op2Debug.write('%s\n' % (str(out)))
(grid, fd1, sx1r, sx1i, sy1r, sy1i, txy1r, txy1i,
fd2, sx2r, sx2i, sy2r, sy2i, txy2r, txy2i) = out
if is_magnitude_phase:
sx1 = polar_to_real_imag(sx1r, sx1i)
sx2 = polar_to_real_imag(sx2r, sx2i)
sy1 = polar_to_real_imag(sy1r, sy1i)
sy2 = polar_to_real_imag(sy2r, sy2i)
txy1 = polar_to_real_imag(txy1r, txy1i)
txy2 = polar_to_real_imag(txy2r, txy2i)
else:
sx1 = complex(sx1r, sx1i)
sx2 = complex(sx2r, sx2i)
sy1 = complex(sy1r, sy1i)
sy2 = complex(sy2r, sy2i)
txy1 = complex(txy1r, txy1i)
txy2 = complex(txy2r, txy2i)
#print "eid=%i grid=%i fd1=%i sx1=%i sy1=%i txy1=%i" %(eid,grid,fd1,sx1,sy1,txy1)
#print " fd2=%i sx2=%i sy2=%i txy2=%i\n" %(fd2,sx2,sy2,txy2)
#print "len(data) = ",len(self.data)
#self.print_block(self.data)
self.obj.addNewNode(dt, eid, grid, fd1, sx1, sy1, txy1)
self.obj.add(dt, eid, grid, fd2, sx2, sy2, txy2)
def _read_grid_point_forces(self, data, ndata, prefix=''):
"""
table_code = 19
"""
self._setup_op2_subcase('GPFORCE')
dt = self.nonlinear_factor
n = 0
is_magnitude_phase = self.is_magnitude_phase()
if self.thermal == 0:
result_name = prefix + 'grid_point_forces'
if self._results.is_not_saved(result_name):
return ndata
self._results._found_result(result_name)
slot = self.get_result(result_name)
if self.num_wide == 10:
ntotal = 40
nnodes = ndata // ntotal
obj_vector_real = RealGridPointForcesArray
auto_return, is_vectorized = self._create_ntotal_object(
nnodes, result_name, slot, obj_vector_real)
if auto_return:
return nnodes * self.num_wide * 4
obj = self.obj
if self.is_debug_file:
self.binary_debug.write(' GPFORCE\n')
self.binary_debug.write(' [cap, gpforce1, gpforce2, ..., cap]\n')
self.binary_debug.write(' cap = %i # assume 1 cap when there could have been multiple\n' % len(data))
self.binary_debug.write(' gpforce1 = [nid_device, eid, elem_name, f1, f2, f3, m1, m2, m3]\n')
self.binary_debug.write(' nnodes=%i\n' % nnodes)
if self.use_vector and is_vectorized:
# self.itime = 0
# self.ielement = 0
# self.itotal = 0
#self.ntimes = 0
#self.nelements = 0
n = nnodes * self.num_wide * 4
istart = obj.itotal
iend = istart + nnodes
obj._times[obj.itime] = dt
itime = obj.itime
if itime == 0 or obj.is_unique:
ints = frombuffer(data, dtype=self.idtype).reshape(nnodes, 10).copy()
nids = ints[:, 0] // 10
eids = ints[:, 1]
strings = frombuffer(data, dtype=self._uendian + 'S8').reshape(nnodes, 5).copy()
if obj.is_unique:
obj.node_element[itime, istart:iend, 0] = nids
obj.node_element[itime, istart:iend, 1] = eids
obj.element_names[itime, istart:iend] = strings[:, 1]
else:
obj.node_element[istart:iend, 0] = nids
obj.node_element[istart:iend, 1] = eids
obj.element_names[istart:iend] = strings[:, 1]
floats = frombuffer(data, dtype=self.fdtype).reshape(nnodes, 10)
#[f1, f2, f3, m1, m2, m3]
obj.data[itime, istart:iend, :] = floats[:, 4:].copy()
#obj._times[obj.itime] = dt
#obj.itotal = itotal2
if self.is_debug_file:
if itime != 0:
ints = frombuffer(data, dtype=self.idtype).reshape(nnodes, 10)
strings = frombuffer(data, dtype=self._uendian + 'S8').reshape(nnodes, 5)
for i in range(iend - istart):
self.binary_debug.write(' nid=%s - (%s, %s, %s, %s, %s, %s, %s, %s, %s)\n' % (
ints[i, 0] // 10,
ints[i, 0], ints[i, 1], strings[i, 1],
floats[i, 4], floats[i, 5], floats[i, 6],
floats[i, 7], floats[i, 8], floats[i, 9], ))
else:
s = Struct(self._endian + b'ii8s6f')
for i in range(nnodes):
edata = data[n:n+ntotal]
out = s.unpack(edata)
(nid_device, eid, elem_name, f1, f2, f3, m1, m2, m3) = out
nid = nid_device // 10
elem_name = elem_name.strip()
if self.is_debug_file:
self.binary_debug.write(' nid=%s - %s\n' % (nid, str(out)))
self.obj.add_sort1(dt, nid, eid, elem_name, f1, f2, f3, m1, m2, m3)
n += ntotal
elif self.num_wide == 16:
# complex
ntotal = 64
nnodes = ndata // ntotal
obj_vector_real = ComplexGridPointForcesArray
auto_return, is_vectorized = self._create_ntotal_object(
nnodes, result_name, slot, obj_vector_real)
if auto_return:
return nnodes * self.num_wide * 4
obj = self.obj
is_vectorized = False
if self.use_vector and is_vectorized:
# self.itime = 0
# self.ielement = 0
# self.itotal = 0
#self.ntimes = 0
#self.nelements = 0
n = nnodes * self.num_wide * 4
istart = obj.itotal
iend = istart + nnodes
obj._times[obj.itime] = dt
if obj.itime == 0:
ints = frombuffer(data, dtype=self.idtype).reshape(nnodes, 16)
nids = ints[:, 0] // 10
eids = ints[:, 1]
obj.node_element[istart:iend, 0] = nids
obj.node_element[istart:iend, 1] = eids
strings = frombuffer(data, dtype=self._uendian + 'S8').reshape(nnodes, 8)
obj.element_names[istart:iend] = strings[:, 1].copy()
floats = frombuffer(data, dtype=self.fdtype).reshape(nnodes, 16)
#[f1, f2, f3, m1, m2, m3]
obj.data[obj.itime, istart:iend, :] = floats[:, 4:].copy()
else:
s = Struct(self._endian + b'ii8s12f')
#if self.is_debug_file:
#self.binary_debug.write(' GPFORCE\n')
#self.binary_debug.write(' [cap, gpforce1, gpforce2, ..., cap]\n')
#self.binary_debug.write(' cap = %i # assume 1 cap when there could have been multiple\n' % len(data))
#self.binary_debug.write(' gpforce1 = [nid_device, eid, elem_name, f1, f2, f3, m1, m2, m3]\n')
#self.binary_debug.write(' nnodes=%i\n' % nnodes)
for i in range(nnodes):
edata = data[n:n+ntotal]
out = s.unpack(edata)
(nid_device, eid, elem_name,
f1r, f2r, f3r, m1r, m2r, m3r,
f1i, f2i, f3i, m1i, m2i, m3i) = out
nid = nid_device // 10
elem_name = elem_name.strip()
if self.is_debug_file:
self.binary_debug.write(' nid=%s - %s\n' % (nid, str(out)))
if is_magnitude_phase:
f1 = polar_to_real_imag(f1r, f1i)
f2 = polar_to_real_imag(f2r, f2i)
f3 = polar_to_real_imag(f3r, f3i)
m1 = polar_to_real_imag(m1r, m1i)
m2 = polar_to_real_imag(m2r, m2i)
m3 = polar_to_real_imag(m3r, m3i)
else:
f1 = complex(f1r, f1i)
f2 = complex(f2r, f2i)
f3 = complex(f3r, f3i)
m1 = complex(m1r, m1i)
m2 = complex(m2r, m2i)
m3 = complex(m3r, m3i)
self.obj.add_sort1(dt, nid, eid, elem_name, f1, f2, f3, m1, m2, m3)
n += ntotal
else:
raise NotImplementedError(self.code_information())
else:
raise NotImplementedError(self.code_information())
#msg = self.code_information()
#return self._not_implemented_or_skip(data, ndata, msg)
return n
def OEF_Shear_alt(self): # 4-CSHEAR
dt = self.nonlinear_factor
(format1, extract) = self.getOEF_FormatStart()
format1 += '32f'
is_magnitude_phase = self.is_magnitude_phase()
while len(self.data) >= 132: # 33*4
eData = self.data[0:132]
self.data = self.data[132:]
#print "len(data) = ",len(eData)
out = unpack(format1, eData)
(eid, f41r, f21r, f12r, f32r, f23r, f43r, f34r, f14r, kf1r, s12r, kf2r, s23r, kf3r, s34r, kf4r, s41r,
f41i, f21i, f12i, f32i, f23i, f43i, f34i, f14i, kf1i, s12i, kf2i, s23i, kf3i, s34i, kf4i, s41i) = out
if is_magnitude_phase:
f41r = polar_to_real_imag(f41r, f41i)
kf1 = polar_to_real_imag(kf1r, kf1i)
f21r = polar_to_real_imag(f21r, f21i)
kf2 = polar_to_real_imag(kf2r, kf2i)
f12r = polar_to_real_imag(f12r, f12i)
kf3 = polar_to_real_imag(kf3r, kf3i)
f23r = polar_to_real_imag(f23r, f23i)
kf4 = polar_to_real_imag(kf4r, kf4i)
f32r = polar_to_real_imag(f32r, f32i)
s12 = polar_to_real_imag(s12r, s12i)
f43r = polar_to_real_imag(f43r, f43i)
s23 = polar_to_real_imag(s23r, s23i)
f34r = polar_to_real_imag(f34r, f34i)
s34 = polar_to_real_imag(s34r, s34i)
f14r = polar_to_real_imag(f14r, f14i)
s41 = polar_to_real_imag(s41r, s41i)
else:
f41 = complex(f41r, f41i)
kf1 = complex(kf1r, kf1i)
f21 = complex(f21r, f21i)
kf2 = complex(kf2r, kf2i)
f12 = complex(f12r, f12i)
kf3 = complex(kf3r, kf3i)
f23 = complex(f23r, f23i)
kf4 = complex(kf4r, kf4i)
f32 = complex(f32r, f32i)
s12 = complex(s12r, s12i)
f43 = complex(f43r, f43i)
s23 = complex(s23r, s23i)
f34 = complex(f34r, f34i)
s34 = complex(s34r, s34i)
f14 = complex(f14r, f14i)
s41 = complex(s41r, s41i)
eid2 = extract(eid, dt)
#print "eType=%s" %(eType)
dataIn = [eid2, f41, f21, f12, f32, f23, f43, f34, f14,
kf1, s12, kf2, s23, kf3, s34, kf4, s41]
#print "%s" %(self.get_element_type(self.element_type)),dataIn
#eid = self.obj.add_new_eid(out)
self.obj.add(dt, dataIn)
