def update_state(self):
# TODO: apply this directly from observations
# No use applying this to base confs
self.base_conf = FConf(self.world.robot,
self.world.base_joints,
init=True)
arm_conf = FConf(self.world.robot, self.world.arm_joints, init=True)
if (self.arm_conf is None) or not are_confs_close(
arm_conf, self.arm_conf, tol=ARM_TOLERANCE):
self.arm_conf = arm_conf
else:
print('At anticipated arm conf')
gripper_conf = FConf(self.world.robot,
self.world.gripper_joints,
init=True)
if (self.gripper_conf is None) or not are_confs_close(
gripper_conf, self.gripper_conf, tol=GRIPPER_TOLERANCE):
self.gripper_conf = gripper_conf
else:
print('At anticipated gripper conf')
# TODO: do I still need to test if the current values are equal to the last ones?
for joint in self.world.kitchen_joints:
name = get_joint_name(self.world.kitchen, joint)
position = get_joint_position(self.world.kitchen, joint)
self.update_door_conf(name, position)
self.update_door_conf(name, position)
#wait_for_user()
return self.check_consistent()
def get_limits(robot, joint, limits):
if limits is False:
return get_joint_limits(robot, joint)
elif limits is None:
torso_value = get_joint_position(robot, joint)
return torso_value, torso_value
return limits
def test_kinematic(robot, door, target_x):
wait_if_gui('Begin?')
robot_joints = get_movable_joints(robot)[:3]
joint = robot_joints[0]
start_x = get_joint_position(robot, joint)
num_steps = int(math.ceil(abs(target_x - start_x) / 1e-2))
for x in interpolate(start_x, target_x, num_steps=num_steps):
set_joint_position(robot, joint=joint, value=x)
#with LockRenderer():
solve_collision_free(door, robot, draw=False)
wait_for_duration(duration=1e-2)
#wait_if_gui()
wait_if_gui('Finish?')
def fn(body, pose, grasp):
obstacles = [body] + fixed
gripper_pose = end_effector_from_body(pose.pose, grasp.grasp_pose)
approach_pose = approach_from_grasp(grasp.approach_pose, gripper_pose)
draw_pose(get_tool_pose(robot, ARM), length=0.04)
draw_pose(approach_pose, length=0.04)
draw_pose(gripper_pose, length=0.04)
# print(movable_joints)
# print(torso_arm)
# wait_for_interrupt()
# TODO: gantry_x_joint
# TODO: proper inverse reachability
base_link = link_from_name(robot, IK_BASE_FRAMES[ARM])
base_pose = get_link_pose(robot, base_link)
body_point_in_base = point_from_pose(multiply(invert(base_pose), pose.pose))
y_joint = joint_from_name(robot, '{}_gantry_y_joint'.format(prefix_from_arm(ARM)))
initial_y = get_joint_position(robot, y_joint)
ik_y = initial_y + SIGN_FROM_ARM[ARM]*body_point_in_base[1]
set_joint_position(robot, y_joint, ik_y)
for _ in range(num_attempts):
if USE_IKFAST:
q_approach = sample_tool_ik(robot, ARM, approach_pose)
if q_approach is not None:
set_joint_positions(robot, torso_arm, q_approach)
else:
set_joint_positions(robot, torso_arm, sample_fn()) # Random seed
q_approach = inverse_kinematics(robot, grasp.link, approach_pose)
if (q_approach is None) or any(pairwise_collision(robot, b) for b in obstacles):
print('- ik for approaching fails!')
continue
conf = BodyConf(robot, joints=arm_joints)
if USE_IKFAST:
q_grasp = sample_tool_ik(robot, ARM, gripper_pose, closest_only=True)
if q_grasp is not None:
set_joint_positions(robot, torso_arm, q_grasp)
else:
conf.assign()
q_grasp = inverse_kinematics(robot, grasp.link, gripper_pose)
if (q_grasp is None) or any(pairwise_collision(robot, b) for b in obstacles):
print('- ik for grasp fails!')
continue
if teleport:
path = [q_approach, q_grasp]
else:
conf.assign()
#direction, _ = grasp.approach_pose
#path = workspace_trajectory(robot, grasp.link, point_from_pose(approach_pose), -direction,
# quat_from_pose(approach_pose))
path = plan_direct_joint_motion(robot, torso_arm, q_grasp, obstacles=obstacles,
self_collisions=self_collisions)
if path is None:
if DEBUG_FAILURE:
print('Approach motion failed')
continue
command = Command([BodyPath(robot, path, joints=torso_arm),
Attach(body, robot, grasp.link),
BodyPath(robot, path[::-1], joints=torso_arm, attachments=[grasp])])
return (conf, command)
# TODO: holding collisions
return None
def main():
# TODO: teleporting kuka arm
parser = argparse.ArgumentParser() # Automatically includes help
parser.add_argument('-viewer', action='store_true', help='enable viewer.')
args = parser.parse_args()
client = connect(use_gui=args.viewer)
add_data_path()
#planeId = p.loadURDF("plane.urdf")
table = p.loadURDF("table/table.urdf", 0, 0, 0, 0, 0, 0.707107, 0.707107)
box = create_box(.07, .05, .15)
# boxId = p.loadURDF("r2d2.urdf",cubeStartPos, cubeStartOrientation)
#pr2 = p.loadURDF("pr2_description/pr2.urdf")
pr2 = p.loadURDF("pr2_description/pr2_fixed_torso.urdf")
#pr2 = p.loadURDF("/Users/caelan/Programs/Installation/pr2_drake/pr2_local2.urdf",)
#useFixedBase=0,)
#flags=p.URDF_USE_SELF_COLLISION)
#flags=p.URDF_USE_SELF_COLLISION_EXCLUDE_PARENT)
#flags=p.URDF_USE_SELF_COLLISION_EXCLUDE_ALL_PARENTS)
#pr2 = p.loadURDF("pr2_drake/urdf/pr2_simplified.urdf", useFixedBase=False)
initially_colliding = get_colliding_links(pr2)
print len(initially_colliding)
origin = (0, 0, 0)
print p.getNumConstraints()
# TODO: no way of controlling the base position by itself
# TODO: PR2 seems to collide with itself frequently
# real_time = False
# p.setRealTimeSimulation(real_time)
# left_joints = [joint_from_name(pr2, name) for name in LEFT_JOINT_NAMES]
# control_joints(pr2, left_joints, TOP_HOLDING_LEFT_ARM)
# while True:
# control_joints(pr2, left_joints, TOP_HOLDING_LEFT_ARM)
# if not real_time:
# p.stepSimulation()
# A CollisionMap robot allows the user to specify self-collision regions indexed by the values of two joints.
# GetRigidlyAttachedLinks
print pr2
# for i in range (10000):
# p.stepSimulation()
# time.sleep(1./240.)
#print get_joint_names(pr2)
print[get_joint_name(pr2, joint) for joint in get_movable_joints(pr2)]
print get_joint_position(pr2, joint_from_name(pr2, TORSO_JOINT_NAME))
#open_gripper(pr2, joint_from_name(pr2, LEFT_GRIPPER))
#print get_joint_limits(pr2, joint_from_name(pr2, LEFT_GRIPPER))
#print get_joint_position(pr2, joint_from_name(pr2, LEFT_GRIPPER))
print self_collision(pr2)
"""
print p.getNumConstraints()
constraint = fixed_constraint(pr2, -1, box, -1) # table
p.changeConstraint(constraint)
print p.getNumConstraints()
print p.getConstraintInfo(constraint)
print p.getConstraintState(constraint)
p.stepSimulation()
raw_input('Continue?')
set_point(pr2, (-2, 0, 0))
p.stepSimulation()
p.changeConstraint(constraint)
print p.getConstraintInfo(constraint)
print p.getConstraintState(constraint)
raw_input('Continue?')
print get_point(pr2)
raw_input('Continue?')
"""
# TODO: would be good if we could set the joint directly
print set_joint_position(pr2, joint_from_name(pr2, TORSO_JOINT_NAME),
0.2) # Updates automatically
print get_joint_position(pr2, joint_from_name(pr2, TORSO_JOINT_NAME))
#return
left_joints = [joint_from_name(pr2, name) for name in LEFT_JOINT_NAMES]
right_joints = [joint_from_name(pr2, name) for name in RIGHT_JOINT_NAMES]
print set_joint_positions(
pr2, left_joints,
TOP_HOLDING_LEFT_ARM) # TOP_HOLDING_LEFT_ARM | SIDE_HOLDING_LEFT_ARM
print set_joint_positions(
pr2, right_joints,
REST_RIGHT_ARM) # TOP_HOLDING_RIGHT_ARM | REST_RIGHT_ARM
print get_body_name(pr2)
print get_body_names()
# print p.getBodyUniqueId(pr2)
print get_joint_names(pr2)
#for joint, value in zip(LEFT_ARM_JOINTS, REST_LEFT_ARM):
# set_joint_position(pr2, joint, value)
# for name, value in zip(LEFT_JOINT_NAMES, REST_LEFT_ARM):
# joint = joint_from_name(pr2, name)
# #print name, joint, get_joint_position(pr2, joint), value
# print name, get_joint_limits(pr2, joint), get_joint_type(pr2, joint), get_link_name(pr2, joint)
# set_joint_position(pr2, joint, value)
# #print name, joint, get_joint_position(pr2, joint), value
# for name, value in zip(RIGHT_JOINT_NAMES, REST_RIGHT_ARM):
# set_joint_position(pr2, joint_from_name(pr2, name), value)
print p.getNumJoints(pr2)
jointId = 0
print p.getJointInfo(pr2, jointId)
print p.getJointState(pr2, jointId)
# for i in xrange(10):
# #lower, upper = BASE_LIMITS
# #q = np.random.rand(len(lower))*(np.array(upper) - np.array(lower)) + lower
# q = np.random.uniform(*BASE_LIMITS)
# theta = np.random.uniform(*REVOLUTE_LIMITS)
# quat = z_rotation(theta)
# print q, theta, quat, env_collision(pr2)
# #set_point(pr2, q)
# set_pose(pr2, q, quat)
# #p.getMouseEvents()
# #p.getKeyboardEvents()
# raw_input('Continue?') # Stalls because waiting for input
#
# # TODO: self collisions
# for i in xrange(10):
# for name in LEFT_JOINT_NAMES:
# joint = joint_from_name(pr2, name)
# value = np.random.uniform(*get_joint_limits(pr2, joint))
# set_joint_position(pr2, joint, value)
# raw_input('Continue?')
#start = (-2, -2, 0)
#set_base_values(pr2, start)
# #start = get_base_values(pr2)
# goal = (2, 2, 0)
# p.addUserDebugLine(start, goal, lineColorRGB=(1, 1, 0)) # addUserDebugText
# print start, goal
# raw_input('Plan?')
# path = plan_base_motion(pr2, goal)
# print path
# if path is None:
# return
# print len(path)
# for bq in path:
# set_base_values(pr2, bq)
# raw_input('Continue?')
# left_joints = [joint_from_name(pr2, name) for name in LEFT_JOINT_NAMES]
# for joint in left_joints:
# print joint, get_joint_name(pr2, joint), get_joint_limits(pr2, joint), \
# is_circular(pr2, joint), get_joint_position(pr2, joint)
#
# #goal = np.zeros(len(left_joints))
# goal = []
# for name, value in zip(LEFT_JOINT_NAMES, REST_LEFT_ARM):
# joint = joint_from_name(pr2, name)
# goal.append(wrap_joint(pr2, joint, value))
#
# path = plan_joint_motion(pr2, left_joints, goal)
# print path
# for q in path:s
# set_joint_positions(pr2, left_joints, q)
# raw_input('Continue?')
print p.JOINT_REVOLUTE, p.JOINT_PRISMATIC, p.JOINT_FIXED, p.JOINT_POINT2POINT, p.JOINT_GEAR # 0 1 4 5 6
movable_joints = get_movable_joints(pr2)
print len(movable_joints)
for joint in xrange(get_num_joints(pr2)):
if is_movable(pr2, joint):
print joint, get_joint_name(pr2, joint), get_joint_type(
pr2, joint), get_joint_limits(pr2, joint)
#joints = [joint_from_name(pr2, name) for name in LEFT_JOINT_NAMES]
#set_joint_positions(pr2, joints, sample_joints(pr2, joints))
#print get_joint_positions(pr2, joints) # Need to print before the display updates?
# set_base_values(pr2, (1, -1, -np.pi/4))
# movable_joints = get_movable_joints(pr2)
# gripper_pose = get_link_pose(pr2, link_from_name(pr2, LEFT_ARM_LINK))
# print gripper_pose
# print get_joint_positions(pr2, movable_joints)
# p.addUserDebugLine(origin, gripper_pose[0], lineColorRGB=(1, 0, 0))
# p.stepSimulation()
# raw_input('Pre2 IK')
# set_joint_positions(pr2, left_joints, SIDE_HOLDING_LEFT_ARM) # TOP_HOLDING_LEFT_ARM | SIDE_HOLDING_LEFT_ARM
# print get_joint_positions(pr2, movable_joints)
# p.stepSimulation()
# raw_input('Pre IK')
# conf = inverse_kinematics(pr2, gripper_pose) # Doesn't automatically set configuraitons
# print conf
# print get_joint_positions(pr2, movable_joints)
# set_joint_positions(pr2, movable_joints, conf)
# print get_link_pose(pr2, link_from_name(pr2, LEFT_ARM_LINK))
# #print get_joint_positions(pr2, movable_joints)
# p.stepSimulation()
# raw_input('Post IK')
# return
# print pose_from_tform(TOOL_TFORM)
# gripper_pose = get_link_pose(pr2, link_from_name(pr2, LEFT_ARM_LINK))
# #gripper_pose = multiply(gripper_pose, TOOL_POSE)
# #gripper_pose = get_gripper_pose(pr2)
# for i, grasp_pose in enumerate(get_top_grasps(box)):
# grasp_pose = multiply(TOOL_POSE, grasp_pose)
# box_pose = multiply(gripper_pose, grasp_pose)
# set_pose(box, *box_pose)
# print get_pose(box)
# raw_input('Grasp {}'.format(i))
# return
torso = joint_from_name(pr2, TORSO_JOINT_NAME)
torso_point, torso_quat = get_link_pose(pr2, torso)
#torso_constraint = p.createConstraint(pr2, torso, -1, -1,
# p.JOINT_FIXED, jointAxis=[0] * 3, # JOINT_FIXED
# parentFramePosition=torso_point,
# childFramePosition=torso_quat)
create_inverse_reachability(pr2, box, table)
ir_database = load_inverse_reachability()
print len(ir_database)
return
link = link_from_name(pr2, LEFT_ARM_LINK)
point, quat = get_link_pose(pr2, link)
print point, quat
p.addUserDebugLine(origin, point,
lineColorRGB=(1, 1, 0)) # addUserDebugText
raw_input('Continue?')
current_conf = get_joint_positions(pr2, movable_joints)
#ik_conf = p.calculateInverseKinematics(pr2, link, point)
#ik_conf = p.calculateInverseKinematics(pr2, link, point, quat)
min_limits = [get_joint_limits(pr2, joint)[0] for joint in movable_joints]
max_limits = [get_joint_limits(pr2, joint)[1] for joint in movable_joints]
max_velocities = [
get_max_velocity(pr2, joint) for joint in movable_joints
] # Range of Jacobian
print min_limits
print max_limits
print max_velocities
ik_conf = p.calculateInverseKinematics(pr2,
link,
point,
quat,
lowerLimits=min_limits,
upperLimits=max_limits,
jointRanges=max_velocities,
restPoses=current_conf)
value_from_joint = dict(zip(movable_joints, ik_conf))
print[value_from_joint[joint] for joint in joints]
#print len(ik_conf), ik_conf
set_joint_positions(pr2, movable_joints, ik_conf)
#print len(movable_joints), get_joint_positions(pr2, movable_joints)
print get_joint_positions(pr2, joints)
raw_input('Finish?')
p.disconnect()