def FullChemicalPotentialWindow(target_phase, key_element):
chemsys = key_element + '-' + Composition(target_phase).chemical_system
with MPRester(api_key='') as mpr:
entries = mpr.get_entries_in_chemsys(chemsys)
pd_closed = PhaseDiagram(entries)
transition_chempots = pd_closed.get_transition_chempots(
Element(key_element))
# The exact mu value used to construct the plot for each range is
# the average of the endpoints of the range, with the exception of the last range,
# which is plotted at the value of the last endpoint minus 0.1.
# https://matsci.org/t/question-on-phase-diagram-app-chemical-potential/511
average_chempots = []
if len(transition_chempots) > 1:
for i in range(len(transition_chempots) - 1):
ave = (transition_chempots[i] + transition_chempots[i + 1]) / 2
average_chempots.append(ave)
average_chempots.append(transition_chempots[-1] - 0.1)
elif len(transition_chempots) == 1:
# prepare for binary systems, of which two endnodes tielined directly, like Li-Zr
average_chempots.append(transition_chempots[0])
average_chempots = np.round(average_chempots, 3)
boolean_list = []
for chempot in average_chempots:
# GrandPotentialPhaseDiagram works good even for binary systems to find stable phases
pd_open = GrandPotentialPhaseDiagram(entries,
{Element(key_element): chempot})
stable_phases = [entry.name for entry in pd_open.stable_entries]
boolean_list.append(target_phase in stable_phases)
return (False not in boolean_list)
def get_gppd_transition_chempots(self, open_el, gppd_entries=None):
"""
This is to get all possible transition chemical potentials from PD (rather than GPPD)
Still use pure element ref.
# May consider supporting negative miu in the future
"""
if not gppd_entries:
gppd_entries = self.get_gppd_entries(open_el)
pd = PhaseDiagram(gppd_entries)
vaspref_mius = pd.get_transition_chempots(Element(open_el))
el_ref = VirtualEntry.get_mp_entry(open_el)
elref_mius = [miu - el_ref.energy_per_atom for miu in vaspref_mius]
return elref_mius
def get_phase_diagram_data(self):
"""
Returns grand potential phase diagram data to external plot
Assumes openelement specific element equals None
:return: Data to external plot
"""
open_elements_specific = None
open_element_all = Element(self.open_element)
mpr = MPRester("settings")
# Get data to make phase diagram
entries = mpr.get_entries_in_chemsys(self.system, compatible_only=True)
#print(entries)
if open_elements_specific:
gcpd = GrandPotentialPhaseDiagram(entries, open_elements_specific)
self.plot_phase_diagram(gcpd, False)
self.analyze_phase_diagram(gcpd)
if open_element_all:
pd = PhaseDiagram(entries)
chempots = pd.get_transition_chempots(open_element_all)
#print(chempots)
#all_gcpds = list()
toplot = []
# dic = {}
for idx in range(len(chempots)):
if idx == len(chempots) - 1:
avgchempot = chempots[idx] - 0.1
else:
avgchempot = 0.5 * (chempots[idx] + chempots[idx + 1])
gcpd = GrandPotentialPhaseDiagram(
entries, {open_element_all: avgchempot}, pd.elements)
# toplot.append(self.get_grand_potential_phase_diagram(gcpd))
min_chempot = None if idx == len(chempots) - 1 else chempots[
idx + 1]
max_chempot = chempots[idx]
#gcpd = GrandPotentialPhaseDiagram(entries, {open_element_all: max_chempot}, pd.elements)
toplot.append(self.get_grand_potential_phase_diagram(gcpd))
#toplot.append(max_chempot)
#self.plot_phase_diagram(gcpd, False)
#print({open_element_all: max_chempot})
# Data to plot phase diagram
return toplot
class PhaseDiagramTest(unittest.TestCase):
def setUp(self):
self.entries = EntrySet.from_csv(str(module_dir /
"pdentries_test.csv"))
self.pd = PhaseDiagram(self.entries)
warnings.simplefilter("ignore")
def tearDown(self):
warnings.simplefilter("default")
def test_init(self):
# Ensure that a bad set of entries raises a PD error. Remove all Li
# from self.entries.
entries = filter(
lambda e: (not e.composition.is_element) or e.composition.elements[
0] != Element("Li"),
self.entries,
)
self.assertRaises(PhaseDiagramError, PhaseDiagram, entries)
def test_dim1(self):
# Ensure that dim 1 PDs can eb generated.
for el in ["Li", "Fe", "O2"]:
entries = [
e for e in self.entries if e.composition.reduced_formula == el
]
pd = PhaseDiagram(entries)
self.assertEqual(len(pd.stable_entries), 1)
for e in entries:
decomp, ehull = pd.get_decomp_and_e_above_hull(e)
self.assertGreaterEqual(ehull, 0)
plotter = PDPlotter(pd)
lines, stable_entries, unstable_entries = plotter.pd_plot_data
self.assertEqual(lines[0][1], [0, 0])
def test_ordering(self):
# Test sorting of elements
entries = [
ComputedEntry(Composition(formula), 0)
for formula in ["O", "N", "Fe"]
]
pd = PhaseDiagram(entries)
sorted_elements = (Element("Fe"), Element("N"), Element("O"))
self.assertEqual(tuple(pd.elements), sorted_elements)
entries.reverse()
pd = PhaseDiagram(entries)
self.assertEqual(tuple(pd.elements), sorted_elements)
# Test manual specification of order
ordering = [Element(elt_string) for elt_string in ["O", "N", "Fe"]]
pd = PhaseDiagram(entries, elements=ordering)
self.assertEqual(tuple(pd.elements), tuple(ordering))
def test_stable_entries(self):
stable_formulas = [
ent.composition.reduced_formula for ent in self.pd.stable_entries
]
expected_stable = [
"Fe2O3",
"Li5FeO4",
"LiFeO2",
"Fe3O4",
"Li",
"Fe",
"Li2O",
"O2",
"FeO",
]
for formula in expected_stable:
self.assertTrue(formula in stable_formulas,
formula + " not in stable entries!")
def test_get_formation_energy(self):
stable_formation_energies = {
ent.composition.reduced_formula: self.pd.get_form_energy(ent)
for ent in self.pd.stable_entries
}
expected_formation_energies = {
"Li5FeO4": -164.8117344866667,
"Li2O2": -14.119232793333332,
"Fe2O3": -16.574164339999996,
"FeO": -5.7141519966666685,
"Li": 0.0,
"LiFeO2": -7.732752316666666,
"Li2O": -6.229303868333332,
"Fe": 0.0,
"Fe3O4": -22.565714456666683,
"Li2FeO3": -45.67166036000002,
"O2": 0.0,
}
for formula, energy in expected_formation_energies.items():
self.assertAlmostEqual(energy, stable_formation_energies[formula],
7)
def test_all_entries_hulldata(self):
self.assertEqual(len(self.pd.all_entries_hulldata), 492)
def test_planar_inputs(self):
e1 = PDEntry("H", 0)
e2 = PDEntry("He", 0)
e3 = PDEntry("Li", 0)
e4 = PDEntry("Be", 0)
e5 = PDEntry("B", 0)
e6 = PDEntry("Rb", 0)
pd = PhaseDiagram([e1, e2, e3, e4, e5, e6],
map(Element, ["Rb", "He", "B", "Be", "Li", "H"]))
self.assertEqual(len(pd.facets), 1)
def test_str(self):
self.assertIsNotNone(str(self.pd))
def test_get_e_above_hull(self):
for entry in self.pd.stable_entries:
self.assertLess(
self.pd.get_e_above_hull(entry),
1e-11,
"Stable entries should have e above hull of zero!",
)
for entry in self.pd.all_entries:
if entry not in self.pd.stable_entries:
e_ah = self.pd.get_e_above_hull(entry)
self.assertTrue(isinstance(e_ah, Number))
self.assertGreaterEqual(e_ah, 0)
def test_get_equilibrium_reaction_energy(self):
for entry in self.pd.stable_entries:
self.assertLessEqual(
self.pd.get_equilibrium_reaction_energy(entry),
0,
"Stable entries should have negative equilibrium reaction energy!",
)
def test_get_quasi_e_to_hull(self):
for entry in self.pd.unstable_entries:
# catch duplicated stable entries
if entry.normalize(
inplace=False) in self.pd.get_stable_entries_normed():
self.assertLessEqual(
self.pd.get_quasi_e_to_hull(entry),
0,
"Duplicated stable entries should have negative decomposition energy!",
)
else:
self.assertGreaterEqual(
self.pd.get_quasi_e_to_hull(entry),
0,
"Unstable entries should have positive decomposition energy!",
)
for entry in self.pd.stable_entries:
if entry.composition.is_element:
self.assertEqual(
self.pd.get_quasi_e_to_hull(entry),
0,
"Stable elemental entries should have decomposition energy of zero!",
)
else:
self.assertLessEqual(
self.pd.get_quasi_e_to_hull(entry),
0,
"Stable entries should have negative decomposition energy!",
)
novel_stable_entry = PDEntry("Li5FeO4", -999)
self.assertLess(
self.pd.get_quasi_e_to_hull(novel_stable_entry),
0,
"Novel stable entries should have negative decomposition energy!",
)
novel_unstable_entry = PDEntry("Li5FeO4", 999)
self.assertGreater(
self.pd.get_quasi_e_to_hull(novel_unstable_entry),
0,
"Novel unstable entries should have positive decomposition energy!",
)
duplicate_entry = PDEntry("Li2O", -14.31361175)
scaled_dup_entry = PDEntry("Li4O2", -14.31361175 * 2)
stable_entry = [e for e in self.pd.stable_entries
if e.name == "Li2O"][0]
self.assertEqual(
self.pd.get_quasi_e_to_hull(duplicate_entry),
self.pd.get_quasi_e_to_hull(stable_entry),
"Novel duplicates of stable entries should have same decomposition energy!",
)
self.assertEqual(
self.pd.get_quasi_e_to_hull(scaled_dup_entry),
self.pd.get_quasi_e_to_hull(stable_entry),
"Novel scaled duplicates of stable entries should have same decomposition energy!",
)
def test_get_decomposition(self):
for entry in self.pd.stable_entries:
self.assertEqual(
len(self.pd.get_decomposition(entry.composition)),
1,
"Stable composition should have only 1 decomposition!",
)
dim = len(self.pd.elements)
for entry in self.pd.all_entries:
ndecomp = len(self.pd.get_decomposition(entry.composition))
self.assertTrue(
ndecomp > 0 and ndecomp <= dim,
"The number of decomposition phases can at most be equal to the number of components.",
)
# Just to test decomp for a ficitious composition
ansdict = {
entry.composition.formula: amt
for entry, amt in self.pd.get_decomposition(
Composition("Li3Fe7O11")).items()
}
expected_ans = {
"Fe2 O2": 0.0952380952380949,
"Li1 Fe1 O2": 0.5714285714285714,
"Fe6 O8": 0.33333333333333393,
}
for k, v in expected_ans.items():
self.assertAlmostEqual(ansdict[k], v)
def test_get_transition_chempots(self):
for el in self.pd.elements:
self.assertLessEqual(len(self.pd.get_transition_chempots(el)),
len(self.pd.facets))
def test_get_element_profile(self):
for el in self.pd.elements:
for entry in self.pd.stable_entries:
if not (entry.composition.is_element):
self.assertLessEqual(
len(self.pd.get_element_profile(el,
entry.composition)),
len(self.pd.facets),
)
expected = [
{
"evolution": 1.0,
"chempot": -4.2582781416666666,
"reaction": "Li2O + 0.5 O2 -> Li2O2",
},
{
"evolution": 0,
"chempot": -5.0885906699999968,
"reaction": "Li2O -> Li2O",
},
{
"evolution": -1.0,
"chempot": -10.487582010000001,
"reaction": "Li2O -> 2 Li + 0.5 O2",
},
]
result = self.pd.get_element_profile(Element("O"), Composition("Li2O"))
for d1, d2 in zip(expected, result):
self.assertAlmostEqual(d1["evolution"], d2["evolution"])
self.assertAlmostEqual(d1["chempot"], d2["chempot"])
self.assertEqual(d1["reaction"], str(d2["reaction"]))
def test_get_get_chempot_range_map(self):
elements = [el for el in self.pd.elements if el.symbol != "Fe"]
self.assertEqual(len(self.pd.get_chempot_range_map(elements)), 10)
def test_getmu_vertices_stability_phase(self):
results = self.pd.getmu_vertices_stability_phase(
Composition("LiFeO2"), Element("O"))
self.assertAlmostEqual(len(results), 6)
test_equality = False
for c in results:
if (abs(c[Element("O")] + 7.115) < 1e-2
and abs(c[Element("Fe")] + 6.596) < 1e-2
and abs(c[Element("Li")] + 3.931) < 1e-2):
test_equality = True
self.assertTrue(test_equality,
"there is an expected vertex missing in the list")
def test_getmu_range_stability_phase(self):
results = self.pd.get_chempot_range_stability_phase(
Composition("LiFeO2"), Element("O"))
self.assertAlmostEqual(results[Element("O")][1], -4.4501812249999997)
self.assertAlmostEqual(results[Element("Fe")][0], -6.5961470999999996)
self.assertAlmostEqual(results[Element("Li")][0], -3.6250022625000007)
def test_get_hull_energy(self):
for entry in self.pd.stable_entries:
h_e = self.pd.get_hull_energy(entry.composition)
self.assertAlmostEqual(h_e, entry.energy)
n_h_e = self.pd.get_hull_energy(
entry.composition.fractional_composition)
self.assertAlmostEqual(n_h_e, entry.energy_per_atom)
def test_1d_pd(self):
entry = PDEntry("H", 0)
pd = PhaseDiagram([entry])
decomp, e = pd.get_decomp_and_e_above_hull(PDEntry("H", 1))
self.assertAlmostEqual(e, 1)
self.assertAlmostEqual(decomp[entry], 1.0)
def test_get_critical_compositions_fractional(self):
c1 = Composition("Fe2O3").fractional_composition
c2 = Composition("Li3FeO4").fractional_composition
c3 = Composition("Li2O").fractional_composition
comps = self.pd.get_critical_compositions(c1, c2)
expected = [
Composition("Fe2O3").fractional_composition,
Composition("Li0.3243244Fe0.1621621O0.51351349"),
Composition("Li3FeO4").fractional_composition,
]
for crit, exp in zip(comps, expected):
self.assertTrue(crit.almost_equals(exp, rtol=0, atol=1e-5))
comps = self.pd.get_critical_compositions(c1, c3)
expected = [
Composition("Fe0.4O0.6"),
Composition("LiFeO2").fractional_composition,
Composition("Li5FeO4").fractional_composition,
Composition("Li2O").fractional_composition,
]
for crit, exp in zip(comps, expected):
self.assertTrue(crit.almost_equals(exp, rtol=0, atol=1e-5))
def test_get_critical_compositions(self):
c1 = Composition("Fe2O3")
c2 = Composition("Li3FeO4")
c3 = Composition("Li2O")
comps = self.pd.get_critical_compositions(c1, c2)
expected = [
Composition("Fe2O3"),
Composition("Li0.3243244Fe0.1621621O0.51351349") * 7.4,
Composition("Li3FeO4"),
]
for crit, exp in zip(comps, expected):
self.assertTrue(crit.almost_equals(exp, rtol=0, atol=1e-5))
comps = self.pd.get_critical_compositions(c1, c3)
expected = [
Composition("Fe2O3"),
Composition("LiFeO2"),
Composition("Li5FeO4") / 3,
Composition("Li2O"),
]
for crit, exp in zip(comps, expected):
self.assertTrue(crit.almost_equals(exp, rtol=0, atol=1e-5))
# Don't fail silently if input compositions aren't in phase diagram
# Can be very confusing if you're working with a GrandPotentialPD
self.assertRaises(
ValueError,
self.pd.get_critical_compositions,
Composition("Xe"),
Composition("Mn"),
)
# For the moment, should also fail even if compositions are in the gppd
# because it isn't handled properly
gppd = GrandPotentialPhaseDiagram(self.pd.all_entries, {"Xe": 1},
self.pd.elements + [Element("Xe")])
self.assertRaises(
ValueError,
gppd.get_critical_compositions,
Composition("Fe2O3"),
Composition("Li3FeO4Xe"),
)
# check that the function still works though
comps = gppd.get_critical_compositions(c1, c2)
expected = [
Composition("Fe2O3"),
Composition("Li0.3243244Fe0.1621621O0.51351349") * 7.4,
Composition("Li3FeO4"),
]
for crit, exp in zip(comps, expected):
self.assertTrue(crit.almost_equals(exp, rtol=0, atol=1e-5))
# case where the endpoints are identical
self.assertEqual(self.pd.get_critical_compositions(c1, c1 * 2),
[c1, c1 * 2])
def test_get_composition_chempots(self):
c1 = Composition("Fe3.1O4")
c2 = Composition("Fe3.2O4.1Li0.01")
e1 = self.pd.get_hull_energy(c1)
e2 = self.pd.get_hull_energy(c2)
cp = self.pd.get_composition_chempots(c1)
calc_e2 = e1 + sum(cp[k] * v for k, v in (c2 - c1).items())
self.assertAlmostEqual(e2, calc_e2)
def test_get_all_chempots(self):
c1 = Composition("Fe3.1O4")
c2 = Composition("FeO")
cp1 = self.pd.get_all_chempots(c1)
cpresult = {
Element("Li"): -4.077061954999998,
Element("Fe"): -6.741593864999999,
Element("O"): -6.969907375000003,
}
for elem, energy in cpresult.items():
self.assertAlmostEqual(cp1["Fe3O4-FeO-LiFeO2"][elem], energy)
cp2 = self.pd.get_all_chempots(c2)
cpresult = {
Element("O"): -7.115354140000001,
Element("Fe"): -6.5961471,
Element("Li"): -3.9316151899999987,
}
for elem, energy in cpresult.items():
self.assertAlmostEqual(cp2["FeO-LiFeO2-Fe"][elem], energy)
def test_to_from_dict(self):
# test round-trip for other entry types such as ComputedEntry
entry = ComputedEntry("H", 0.0, 0.0, entry_id="test")
pd = PhaseDiagram([entry])
d = pd.as_dict()
pd_roundtrip = PhaseDiagram.from_dict(d)
self.assertEqual(pd.all_entries[0].entry_id,
pd_roundtrip.all_entries[0].entry_id)
pd = PhaseDiagramOpenAnalyzer(mp_entries[0], open_element_all)
entries.extend(mp_entries)
# Process entries using the MaterialsProjectCompatibility
compat = MaterialsProjectCompatibility()
entries = compat.process_entries(entries)
#explanation_output = open("explain.txt",'w')
entries_output = open("entries.txt", 'w')
compat.explain(entries[0])
#print(entries, file=entries_output)
# pd2 = PhaseDiagram(entries)
chempot_list = pd2.get_transition_chempots(open_element_all)
pd_index = 0
# cria um dicionário
chempot_range_of_each_phase = {}
for particular_phase_diagram in all_phase_diagrams:
# recebe o potencial químico
chempot = chempot_list[pd_index]
if pd_index is not number_of_phase_diagrams - 1:
next_chempot = chempot_list[pd_index + 1]
else:
next_chempot = chempot_list[pd_index] - 2.0
chempot_range = [chempot, next_chempot]
# recebe as fases
phases_list = particular_phase_diagram[0]
def get_phase_diagram_data(self):
"""
Returns grand potential phase diagram data to external plot
Assumes openelement specific element equals None
:return: Data to external plot
"""
open_elements_specific = None
open_element_all = Element(self.open_element)
mpr = MPRester("key")
# import do dados dos arquivos tipo vasp
drone = VaspToComputedEntryDrone()
queen = BorgQueen(drone, rootpath=".")
entries = queen.get_data()
# Get data to make phase diagram
mp_entries = mpr.get_entries_in_chemsys(self.system,
compatible_only=True)
entries.extend(mp_entries)
compat = MaterialsProjectCompatibility()
entries = compat.process_entries(entries)
#explanation_output = open("explain.txt",'w')
entries_output = open("entries.txt", 'w')
compat.explain(entries[0])
print(entries, file=entries_output)
#print(entries)
if open_elements_specific:
gcpd = GrandPotentialPhaseDiagram(entries, open_elements_specific)
self.plot_phase_diagram(gcpd, False)
self.analyze_phase_diagram(gcpd)
if open_element_all:
pd = PhaseDiagram(entries)
chempots = pd.get_transition_chempots(open_element_all)
#print(chempots)
#all_gcpds = list()
toplot = []
# dic = {}
for idx in range(len(chempots)):
if idx == len(chempots) - 1:
avgchempot = chempots[idx] - 0.1
else:
avgchempot = 0.5 * (chempots[idx] + chempots[idx + 1])
gcpd = GrandPotentialPhaseDiagram(
entries, {open_element_all: avgchempot}, pd.elements)
# toplot.append(self.get_grand_potential_phase_diagram(gcpd))
min_chempot = None if idx == len(chempots) - 1 else chempots[
idx + 1]
max_chempot = chempots[idx]
#gcpd = GrandPotentialPhaseDiagram(entries, {open_element_all: max_chempot}, pd.elements)
toplot.append(self.get_grand_potential_phase_diagram(gcpd))
#toplot.append(max_chempot)
#self.plot_phase_diagram(gcpd, False)
#print({open_element_all: max_chempot})
# Data to plot phase diagram
return toplot
def get_phase_diagram_data(self):
"""
Returns grand potential phase diagram data to external plot
Assumes openelement specific element equals None
:return: Data to external plot
"""
open_elements_specific = None
open_element_all = Element(self.open_element)
mpr = MPRester(settings.apiKey)
drone = VaspToComputedEntryDrone()
queen = BorgQueen(drone, rootpath=".")
entries = queen.get_data()
# Get data to make phase diagram
mp_entries = mpr.get_entries_in_chemsys(self.system,
compatible_only=True)
entries.extend(mp_entries)
compat = MaterialsProjectCompatibility()
entries = compat.process_entries(entries)
#explanation_output = open("explain.txt",'w')
#entries_output = open("entries.txt", 'w')
compat.explain(entries[0])
#print(entries, file=entries_output)
if open_elements_specific:
gcpd = GrandPotentialPhaseDiagram(entries, open_elements_specific)
self.plot_phase_diagram(gcpd, False)
self.analyze_phase_diagram(gcpd)
if open_element_all:
pd = PhaseDiagram(entries)
chempots = pd.get_transition_chempots(open_element_all)
# print(chempots)
#all_gcpds = list()
toplot = []
# dic = {}
for idx in range(len(chempots)):
if idx == len(chempots) - 1:
avgchempot = chempots[idx] - 0.1
else:
avgchempot = 0.5 * (chempots[idx] + chempots[idx + 1])
gcpd = GrandPotentialPhaseDiagram(
entries, {open_element_all: avgchempot}, pd.elements)
# min_chempot = None if idx == len(
# chempots) - 1 else chempots[idx + 1]
# max_chempot = chempots[idx]
#gcpd = GrandPotentialPhaseDiagram(entries, {open_element_all: max_chempot}, pd.elements)
toplot.append(self.get_grand_potential_phase_diagram(gcpd))
# toplot.append(max_chempot)
#self.plot_phase_diagram(gcpd, False)
#print({open_element_all: max_chempot})
all_phase_diagrams = toplot
# print(all_phase_diagrams)
number_of_phase_diagrams = len(all_phase_diagrams)
#pd3 = PhaseDiagram(entries)
chempot_list = pd.get_transition_chempots(open_element_all)
pd_index = 0
chempots_range_of_each_phase = {}
for particular_phase_diagram in all_phase_diagrams:
chempot = chempot_list[pd_index]
if pd_index is not number_of_phase_diagrams - 1:
next_chempot = chempot_list[pd_index + 1]
else:
next_chempot = chempot_list[pd_index] - 2.0
chempot_range = [chempot, next_chempot]
phases_list = particular_phase_diagram[0]
for phase in phases_list:
if phase in chempots_range_of_each_phase.keys():
chempots_range_of_each_phase[phase][1] = next_chempot.copy(
)
else:
chempots_range_of_each_phase[phase] = chempot_range.copy()
pd_index = pd_index + 1
return chempots_range_of_each_phase
"O"
) # plot a series of open phase diagrams at critical chem pots with this element open
mpr = MPRester(MAPI_KEY) # object for connecting to MP Rest interface
# get data
entries = mpr.get_entries_in_chemsys(system, compatible_only=True)
if open_elements_specific:
gcpd = GrandPotentialPhaseDiagram(entries, open_elements_specific)
plot_pd(gcpd, False)
analyze_pd(gcpd)
if open_element_all:
pd = PhaseDiagram(entries)
chempots = pd.get_transition_chempots(open_element_all)
all_gcpds = list()
toplot = []
arquivo = open("dados.txt", "w")
for idx in range(len(chempots)):
if idx == len(chempots) - 1:
avgchempot = chempots[idx] - 0.1
else:
avgchempot = 0.5 * (chempots[idx] + chempots[idx + 1])
gcpd = GrandPotentialPhaseDiagram(entries,
{open_element_all: avgchempot},
pd.elements)
min_chempot = None if idx == len(chempots) - 1 else chempots[idx +
1]
max_chempot = chempots[idx]
# Gather all elements involved in the chemical system.
elements = [e.symbol for e in comp1.elements + comp2.elements]
if grand:
elements.append(open_el)
elements = list(set(elements)) # Remove duplicates
# Get all entries in the chemical system
entries = mpr.get_entries_in_chemsys(elements)
# Build a phase diagram using these entries.
pd = PhaseDiagram(entries)
# For an open system, include the grand potential phase diagram.
if grand:
# Get the chemical potential of the pure subtance.
mu = pd.get_transition_chempots(Element(open_el))[0]
# Set the chemical potential in the elemental reservoir.
chempots = {open_el: relative_mu + mu}
# Build the grand potential phase diagram
gpd = GrandPotentialPhaseDiagram(entries, chempots)
# Create InterfacialReactivity object.
interface = InterfacialReactivity(comp1,
comp2,
gpd,
norm=True,
include_no_mixing_energy=True,
pd_non_grand=pd,
use_hull_energy=False)
else:
interface = InterfacialReactivity(comp1,
comp2,
