def setup(pg=4): if pg < 4: m = mem.byte_mem(0x4000, 0x8000) fi = open(fwd + "/08904-87008.hex") for i in fi: j = i.split() if int(j[0],10) == pg: m.wr(int(j[1],16), int(j[2],16)) fi.close() else: m = mem.byte_mem(0x8000, 0x10000) m.load_binfile(0x8000, 1, fwd + "08904-87007.bin") pj = job.Job(m, "HP8904A_pg%d" % pg) pj.pg = pg return pj,m
def mem_setup():
m = mem.byte_mem(0x6800, 0x8000)
dn = os.path.dirname(__file__)
m.load_binfile(0x6800, 1, os.path.join(dn, "A13U2.bin"))
m.load_binfile(0x7000, 1, os.path.join(dn, "A13U3.bin"))
m.load_binfile(0x7800, 1, os.path.join(dn, "A13U4.bin"))
return m
def mem_setup():
m = mem.byte_mem(0x0000, 0x2000)
fn = os.path.join(os.path.dirname(__file__), "HP6034A_U25.hex")
for i in open(fn):
j = i.split()
m.wr(int(j[0], 16), int(j[1], 16))
return m
def setup():
m = mem.byte_mem(0x0, 0x900)
def hexfile(bn, a0):
fn = os.path.join(os.path.dirname(__file__), bn)
fi = open(fn)
for i in fi:
j = i.split()
if len(j) == 0:
continue
if j[0][0] == "#":
continue
a = int(j[0], 16)
b = int(j[1], 16)
m.wr(a0 + a, b)
fi.close()
hexfile("P8316.hex", 0)
hexfile("P1702.hex", 0x800)
pj = job.Job(m, "Micrologic_ML200")
cpu = mcs4.mcs4()
return pj, cpu
def setup(): ####################################################################### # Slightly confusing mapping of memory for this one. Probably an # artifact of a chance from smaller to bigger ROMS along the way. m = mem.byte_mem(0x0000, 0x4000) fn = os.path.join(os.path.dirname(__file__), "A6U1.bin") fi = open(fn, "rb") d = bytearray(fi.read()) fi.close() m.load_data(0x0000, 1, d[:0x1000]) m.load_data(0x2000, 1, d[0x1000:]) fn = os.path.join(os.path.dirname(__file__), "A6U2.bin") fi = open(fn, "rb") d = bytearray(fi.read()) fi.close() m.load_data(0x1000, 1, d[:0x1000]) m.load_data(0x3000, 1, d[0x1000:]) ####################################################################### pj = job.Job(m, "HP3325A") ####################################################################### dx = hp_nanoproc.hp_nanoproc_pg() return pj, dx
def mem_setup():
m = mem.byte_mem(0x0000, 0x7800)
dn = os.path.dirname(__file__)
m.load_binfile(0x0000, 1, os.path.join(dn, "EPROM_ROA_375.bin"))
for a in range(0x797):
m.wr(0x7000 + a, m.rd(0x0069 + a))
return m
def setup(pg): if pg < 4: m = mem.byte_mem(0x4000, 0x8000) fi = open(fwd + "/08904-87008.hex") for i in fi: j = i.split() if int(j[0],10) == pg: m.wr(int(j[1],16), int(j[2],16)) fi.close() else: m = mem.byte_mem(0x8000, 0x10000) m.load_binfile(0x8000, 1, fwd + "08904-87007.bin") pj = job.Job(m, "HP8904A_pg%d" % pg) pj.pg = pg pj.banks.append([0x4000,0x100000]) return pj,m
def setup(): m = mem.byte_mem(0x0000, 0x1000) fn = os.path.join(os.path.dirname(__file__), "618TCA_CDU_U20_U12_PN_138_0192_V_2_2_C_U5.bin") m.load_binfile(0x0000, 1, fn) pj = job.Job(m, "Apollo618c_cdu") cx = mcs51.i8032() return pj, cx
def mem_setup():
m = mem.byte_mem(0x0000, 0x10000)
dn = os.path.dirname(__file__)
m.load_binfile(0x0000, 1, os.path.join(dn, "EPROM_ROB_357.bin"))
for a in range(0x7ee):
m.wr(0xa000 + a, m.rd(0x0012 + a))
return m
def setup():
m = mem.byte_mem(0x8000, 0x10000)
fn = os.path.join(os.path.dirname(__file__), "PL99.mc68hc11.bin")
m.load_binfile(0x8000, 1, fn)
pj = job.Job(m, "PL99")
cx = mc6800.mc68hc11()
return pj, cx
def setup(): m = mem.byte_mem(0xd000,0x10000) dn = os.path.dirname(__file__) m.load_binfile(0xf000, 1, os.path.join(dn, "Rev107f0.BIN")) m.load_binfile(0xe000, 1, os.path.join(dn, "Rev107f1.BIN")) m.load_binfile(0xd000, 1, os.path.join(dn, "Rev107f2.BIN")) pj = job.Job(m, "Austron2100F_107") cx = mc6800.mc6800() return pj, cx
def setup():
m = mem.byte_mem(0x0000, 0x10000)
dn = os.path.dirname(__file__)
m.load_binfile(0x0000, 1, os.path.join(dn, "EPROM_ROB_357.bin"))
for a in range(0x7ee):
m.wr(0xa000 + a, m.rd(0x0012 + a))
pj = job.Job(m, "RC702_bootrom_rob_357")
cx = z80.z80()
return pj, cx
def setup(): m = mem.byte_mem(0x0000, 0x4000) fn = os.path.join(os.path.dirname(__file__), "hp3336.bin") m.load_binfile(0, 1, fn) pj = job.Job(m, "HP3336") dx = hp_nanoproc.hp_nanoproc_pg() return pj, dx
def setup():
m = mem.byte_mem(0x0000, 0x7800)
dn = os.path.dirname(__file__)
m.load_binfile(0x0000, 1, os.path.join(dn, "EPROM_ROA_375.bin"))
for a in range(0x797):
m.wr(0x7000 + a, m.rd(0x0069 + a))
pj = job.Job(m, "RC702_bootrom_roa_375")
cx = z80.z80()
return pj, cx
def mem_setup(): m = mem.byte_mem(0x0, 0x20000) for b,n in ( (0x00000, "85680-80116.BIN"), (0x00001, "85680-80115.BIN"), (0x10000, "85680-80114.BIN"), (0x10001, "85680-80113.BIN"), ): m.load_binfile(first = b, step = 0x2, filename=os.path.join(os.path.dirname(__file__), n)) return m
def setup():
m = mem.byte_mem(0xe0000, 0x100000)
fn = os.path.join(os.path.dirname(__file__),
"618TCA_R_U2_C_U15_PN_138_0193_V4_4.bin")
m.load_binfile(0xe0000, 1, fn)
pj = job.Job(m, "Apollo618c")
cx = i8086.i8086()
cx.has_8087()
return pj,cx
def setup():
m = mem.byte_mem(0x6800, 0x8000)
dn = os.path.dirname(__file__)
m.load_binfile(0x6800, 1, os.path.join(dn, "A13U2.bin"))
m.load_binfile(0x7000, 1, os.path.join(dn, "A13U3.bin"))
m.load_binfile(0x7800, 1, os.path.join(dn, "A13U4.bin"))
pj = job.Job(m, "HP3335A")
cpu = mc6800.mc6800(mask=0x7FFF)
return pj, cpu
def setup(): m = mem.byte_mem(0x0000, 0x2000) fn = os.path.join(os.path.dirname(__file__), "HP6034A_U25.hex") fi = open(fn) for i in fi: j = i.split() m.wr(int(j[0], 16), int(j[1], 16)) pj = job.Job(m, "HP6034A") cx = tms9900.Tms9981() return pj, cx
def mem_setup():
# Slightly confusing mapping of memory for this one. Probably an
# artifact of a chance from smaller to bigger ROMS along the way.
m = mem.byte_mem(0x0000, 0x4000)
fn = os.path.join(os.path.dirname(__file__), "A6U1.bin")
d = bytearray(open(fn, "rb").read())
m.load_data(0x0000, 1, d[:0x1000])
m.load_data(0x2000, 1, d[0x1000:])
fn = os.path.join(os.path.dirname(__file__), "A6U2.bin")
d = bytearray(open(fn, "rb").read())
m.load_data(0x1000, 1, d[:0x1000])
m.load_data(0x3000, 1, d[0x1000:])
return m
def setup(name, binfile, direction):
print("\n\nDoing: " + binfile)
m = mem.byte_mem(0x6000, 0x8000)
fn = os.path.join(os.path.dirname(__file__), binfile)
if direction == 1:
m.load_binfile(0x6000, 1, fn)
else:
m.load_binfile(0x7fff, -1, fn)
pj = job.Job(m, name)
cx = mc6800.mc6800(mask = 0x7fff)
eprom(pj, cx.disass, m.lo, m.hi, 0x0400)
cx.vectors(pj, 0x7ff8)
return pj,cx
def mem_setup():
m = mem.byte_mem(0x0000, 0x10000)
dn = os.path.dirname(__file__)
m.load_binfile(0x0000, 1,
os.path.join(dn, "hp1347a_proto.low.rom"))
m.load_binfile(0xe000, 1,
os.path.join(dn, "hp1347a_proto.high.rom"))
s = 0
for a in range(0x0000, 0x2000, 2):
s += m.bu16(a)
print("SUM 0x0000-0x1fff = 0x%x" % s)
s = 0
for a in range(0xe000, 0x10000, 2):
s += m.bu16(a)
print("SUM 0xe000-0xffff = 0x%x" % s)
return m
def mem_setup():
m = mem.byte_mem(0x0, 0x900)
def hexfile(bn, a0):
fn = os.path.join(os.path.dirname(__file__), bn)
fi = open(fn)
for i in fi:
j = i.split()
if len(j) == 0:
continue
if j[0][0] == "#":
continue
a = int(j[0], 16)
b = int(j[1], 16)
m.wr(a0 + a, b)
fi.close()
hexfile("P8316.hex", 0)
hexfile("P1702.hex", 0x800)
return m
def do_one(fn, alist):
print("--------------", fn)
m = mem.byte_mem(0x000, 0x800)
orig_src = dict()
labels = dict()
def load_xx(m):
fi = open(fn)
for i in fi:
if i[0] != ' ':
continue
j = i.strip()
if j == "":
continue
j = i.split('*', 1)[0].rstrip()
if len(j) < 15:
continue
if j[8] != "-":
continue
if not j[14].isdigit():
continue
if j[14:18] == ' ':
continue
a = int(j[14:18], 8)
d = int(j[20:23], 8)
orig_src[a] = j
m.wr(a, d)
lb = j[25:30].strip()
if lb != "":
labels[a] = lb
fi.close()
load_xx(m)
pj = pyreveng.Job(m, "HP-9411")
dx = hp_nanoproc.hp_nanoproc()
if True:
for i in alist:
pj.todo(i, dx.disass)
pj.apct = "%04o"
pj.apct = "%03x"
while pj.run():
pass
def fixit(i, a, b):
if i == a.lo:
# Check if there are instructions our disass don't know
if a.mne != b[31:34]:
print(a.im, b)
a.lcmt += b + "\n"
for i, j in orig_src.items():
x = pj.t.find_range(i, i + 1)
if len(x[1]) > 0:
fixit(i, x[1][0], j)
elif len(x[0]) > 0:
fixit(i, x[0][0], j)
else:
x = pj.add(i, i + 1, "origsrc")
x.lcmt += j + "\n"
# print(x)
for i in labels:
pj.set_label(i, labels[i])
if True:
code.lcmt_flows(pj)
listing.Listing(pj, fn="/tmp/_.HP" + fn, fmt="o", ncol=1)
def mem_setup():
m = mem.byte_mem(0x8000, 0x10000)
for i in open(fwd + "06626-80005-REV-A-00-04.hex"):
j = i.split()
m.wr(int(j[0], 16), int(j[1], 16))
return m
def mem_setup():
m = mem.byte_mem(0x0000, 0x1000)
fn = os.path.join(os.path.dirname(__file__),
"618TCA_CDU_U20_U12_PN_138_0192_V_2_2_C_U5.bin")
m.load_binfile(0x0000, 1, fn)
return m
def mem_setup():
m = mem.byte_mem(0x8000, 0x10000)
fn = os.path.join(os.path.dirname(__file__), "PL99.mc68hc11.bin")
m.load_binfile(0x8000, 1, fn)
return m
def do_one(fn, alist):
print("--------------", fn)
m = mem.byte_mem(0x000, 0x800)
orig_src = dict()
labels = dict()
def load_xx(m):
fi = open(fn)
for i in fi:
if i[0] != " ":
continue
j = i.strip()
if j == "":
continue
j = i.split("*", 1)[0].rstrip()
if len(j) < 15:
continue
if j[8] != "-":
continue
if not j[14].isdigit():
continue
if j[14:18] == " ":
continue
a = int(j[14:18], 8)
d = int(j[20:23], 8)
orig_src[a] = j
m.wr(a, d)
lb = j[25:30].strip()
if lb != "":
labels[a] = lb
fi.close()
load_xx(m)
pj = pyreveng.Job(m, "HP-9411")
dx = hp_nanoproc.hp_nanoproc()
if True:
for i in alist:
pj.todo(i, dx.disass)
pj.apct = "%04o"
pj.apct = "%03x"
while pj.run():
pass
def fixit(i, a, b):
if i == a.lo:
# Check if there are instructions our disass don't know
if a.mne != b[31:34]:
print(a.im, b)
a.lcmt += b + "\n"
for i, j in orig_src.items():
x = pj.t.find_range(i, i + 1)
if len(x[1]) > 0:
fixit(i, x[1][0], j)
elif len(x[0]) > 0:
fixit(i, x[0][0], j)
else:
x = pj.add(i, i + 1, "origsrc")
x.lcmt += j + "\n"
# print(x)
for i in labels:
pj.set_label(i, labels[i])
if True:
code.lcmt_flows(pj)
listing.Listing(pj, fn="/tmp/_.HP" + fn, fmt="o", ncol=1)
def mem_setup():
m = mem.byte_mem(0x0000, 0x4000)
fn = os.path.join(os.path.dirname(__file__), "hp3336.bin")
m.load_binfile(0, 1, fn)
return m
def mem_setup(): m = mem.byte_mem(0x0000, 0x0200) fn = os.path.join(os.path.dirname(__file__), "1818-2270B.bin") m.load_binfile(0, 1, fn) return m
def mem_setup():
m = mem.byte_mem(0xe0000, 0x100000)
fn = os.path.join(os.path.dirname(__file__),
"618TCA_R_U2_C_U15_PN_138_0193_V4_4.bin")
m.load_binfile(0xe0000, 1, fn)
return m
def mem_setup():
m = mem.byte_mem(0x0, 0x400)
m.load_binfile(0x0, 1, os.path.join(os.path.dirname(__file__), fw))
return m
