def __clt_bil_max_wind_speed_no():
from pysenorge.io.png import CLT, HDR, CLTitem
hdr = HDR(255, 8, 'Maksimal vindhastighet',
'Maksimal vindhastighet i 10 m h�yde', 'Vindstyrke')
cltlist = [
CLTitem(367, 3000, (80, 0, 153), 'Orkan (over 32,6 m/s)'),
CLTitem(285, 326, (80, 13, 243), 'Sterk storm (28,5-32,6 m/s)'),
CLTitem(245, 284, (205, 13, 243), 'Full storm (24,5-28,4 m/s)'),
CLTitem(208, 244, (243, 13, 186), 'Liten storm (20,8-24,4 m/s)'),
CLTitem(172, 207, (243, 13, 76), 'Sterk kuling (17,2-20,7 m/s)'),
CLTitem(139, 171, (243, 66, 13), 'Stiv kuling (13,9-17,1 m/s)'),
CLTitem(108, 137, (243, 150, 13), 'Liten kuling (10,8-13,7 m/s)'),
CLTitem(80, 107, (243, 234, 13), 'Frisk bris (8-10,7 m/s)'),
CLTitem(55, 79, (182, 243, 13), 'Laber bris (5,5-7,9 m/s)'),
CLTitem(34, 54, (100, 224, 121), 'Lett bris (3,4-5,4 m/s)'),
CLTitem(16, 33, (100, 224, 187), 'Svak vind (1,6-3,3 m/s)'),
CLTitem(0, 16, (174, 174, 174), 'Vindstille (<1,6 m/s)'),
CLTitem(3001, UintFillValue, (255, 255, 255), 'Ingen data')
]
cltfile = CLT()
cltfile.new(hdr, cltlist)
cltfile.write(
r"Z:\snowsim\wind_speed_max_10m\wind_speed_max_10m_no_bil.clt")
def __clt_tsi():
'''
Creates CLT file for temperature-stability index bil file.
'''
from pysenorge.io.png import CLT, HDR, CLTitem
hdr = HDR(255, 8, 'Temperatur-stability index', '', 'Stability')
cltlist = [
CLTitem(-0.5, 0.5, (211, 211, 211), 'not classified'),
CLTitem(0.5, 1.5, (64, 224, 208), 'unchanged'),
CLTitem(1.5, 2.5, (255, 99, 71), 'increase'),
CLTitem(2.5, 3.5, (50, 205, 50), 'decrease'),
CLTitem(3.5, 4.5, (255, 0, 0), 'drastic decrease')
]
cltfile = CLT()
cltfile.new(hdr, cltlist)
cltfile.write("/home/ralf/Dokumente/summerjob/data/test.clt")
print 'Created CLT file for temperature-stability index'
def __clt_wind_direction_en():
from pysenorge.io.png import CLT, HDR, CLTitem
hdr = HDR(255, 8,
'Prevailing wind direction',
'Prevailing wind direction at 10 m above ground',
'Cardinal direction')
cltlist = [CLTitem(0, 1, (0,0,255), 'N'),
CLTitem(1, 2, (126, 0, 255), 'NE'),
CLTitem(2, 3, (255, 0, 215), 'E'),
CLTitem(3, 4, (255, 126, 0), 'SE'),
CLTitem(4, 5, (255, 0, 0), 'S'),
CLTitem(5, 6, (255, 245, 0), 'SW'),
CLTitem(6, 7, (0, 255, 0), 'W'),
CLTitem(7, 8, (0, 230, 255), 'NW'),
CLTitem(8, 255, (255, 255, 255), 'No data')]
cltfile = CLT()
cltfile.new(hdr, cltlist)
cltfile.write(r"Z:\tmp\wind_10m_daily\wind_direction_10_en.clt")
def __clt_wind_direction_no():
from pysenorge.io.png import CLT, HDR, CLTitem
hdr = HDR(255, 8,
'Hovedvindretning',
'Hovedvindretning i 10 m høyde',
'Himmelretning')
cltlist = [CLTitem(0, 1, (0,0,255), 'N'),
CLTitem(1, 2, (126, 0, 255), 'NØ'),
CLTitem(2, 3, (255, 0, 215), 'Ø'),
CLTitem(3, 4, (255, 126, 0), 'SØ'),
CLTitem(4, 5, (255, 0, 0), 'S'),
CLTitem(5, 6, (255, 245, 0), 'SV'),
CLTitem(6, 7, (0, 255, 0), 'V'),
CLTitem(7, 8, (0, 230, 255), 'NV'),
CLTitem(8, 255, (255, 255, 255), 'Ingen data')]
cltfile = CLT()
cltfile.new(hdr, cltlist)
cltfile.write(r"Z:\tmp\wind_10m_daily\wind_direction_10_no.clt")
def clt_wind_direction_no_v2():
from pysenorge.io.png import CLT, HDR, CLTitem
hdr = HDR(UintFillValue, 16, 'Hovedvindretning siste døgn',
'Hovedvindretning i 600 m høyde', 'Himmelretning')
cltlist = [
CLTitem(0, 1, (0, 16, 165), 'N'),
CLTitem(1, 2, (0, 100, 181), 'NØ'),
CLTitem(2, 3, (15, 173, 0), 'Ø'),
CLTitem(3, 4, (140, 199, 0), 'SØ'),
CLTitem(4, 5, (255, 255, 20), 'S'),
CLTitem(5, 6, (255, 148, 0), 'SV'),
CLTitem(6, 7, (255, 40, 40), 'V'),
CLTitem(7, 8, (197, 0, 124), 'NV'),
CLTitem(8, UintFillValue, (255, 255, 255), 'Ingen data')
]
cltfile = CLT()
cltfile.new(hdr, cltlist)
cltfile.write(r"Z:\snowsim\wind_600m_daily\wind_direction_600_no.clt")
def clt_wind_direction_en():
from pysenorge.io.png import CLT, HDR, CLTitem
hdr = HDR(UintFillValue, 16, 'Prevailing wind direction last 24h',
'Prevailing wind direction at 600 m above ground',
'Cardinal direction')
cltlist = [
CLTitem(0, 1, (0, 16, 165), 'N'),
CLTitem(1, 2, (0, 100, 181), 'NE'),
CLTitem(2, 3, (15, 173, 0), 'E'),
CLTitem(3, 4, (140, 199, 0), 'SE'),
CLTitem(4, 5, (255, 255, 20), 'S'),
CLTitem(5, 6, (255, 148, 0), 'SW'),
CLTitem(6, 7, (255, 40, 40), 'W'),
CLTitem(7, 8, (197, 0, 124), 'NW'),
CLTitem(8, UintFillValue, (255, 255, 255), 'No data')
]
cltfile = CLT()
cltfile.new(hdr, cltlist)
cltfile.write(r"Z:\snowsim\wind_600m_daily\wind_direction_600_en.clt")
def __clt_avg_wind_speed_no():
from pysenorge.io.png import CLT, HDR, CLTitem
hdr = HDR(255, 8,
'Gjennomsnittlig vindhastighet',
'Gjennomsnittlig vindhastighet i 10 m høyde',
'Vindstyrke')
cltlist = [CLTitem(36.7, 300.0, (255,74,74), 'Orkan (over 32,6 m/s)'),
CLTitem(28.5, 32.6, (126, 0, 255), 'Sterk storm (28,5-32,6 m/s)'),
CLTitem(24.5, 28.4, (255,194,74), 'Full storm (24,5-28,4 m/s)'),
CLTitem(20.8, 24.4, (255,255,74), 'Liten storm (20,8-24,4 m/s)'),
CLTitem(17.2, 20.7, (194,224,74), 'Sterk kuling (17,2-20,7 m/s)'),
CLTitem(13.9, 17.1, (134,194,74), 'Stiv kuling (13,9-17,1 m/s)'),
CLTitem(10.8, 13.7, (74,164,74), 'Liten kuling (10,8-13,7 m/s)'),
CLTitem(8.0, 10.7, (74,194,134), 'Frisk bris (8-10,7 m/s)'),
CLTitem(5.5, 7.9, (74,224,194), 'Laber bris (5,5-7,9 m/s)'),
CLTitem(3.4, 5.4, (74,255,255), 'Lett bris (3,4-5,4 m/s)'),
CLTitem(1.6, 3.3, (74,194,224), 'Svak vind (1,6-3,3 m/s)'),
CLTitem(300.1, FloatFillValue, (255, 255, 255), 'Ingen data')]
cltfile = CLT()
cltfile.new(hdr, cltlist)
cltfile.write(r"Z:\tmp\wind_10m_daily\avg_wind_speed_10_no.clt")
def __clt_max_wind_speed_no():
from pysenorge.io.png import CLT, HDR, CLTitem
hdr = HDR(255, 8, 'Maksimal vindhastighet',
'Maksimal vindhastighet i 1500 m hoeyde', 'Vindstyrke')
cltlist = [
CLTitem(36.7, 300.0, (80, 0, 153), 'Orkan (over 32,6 m/s)'),
CLTitem(28.5, 32.6, (80, 13, 243), 'Sterk storm (28,5-32,6 m/s)'),
CLTitem(24.5, 28.4, (205, 13, 243), 'Full storm (24,5-28,4 m/s)'),
CLTitem(20.8, 24.4, (243, 13, 186), 'Liten storm (20,8-24,4 m/s)'),
CLTitem(17.2, 20.7, (243, 13, 76), 'Sterk kuling (17,2-20,7 m/s)'),
CLTitem(13.9, 17.1, (243, 66, 13), 'Stiv kuling (13,9-17,1 m/s)'),
CLTitem(10.8, 13.7, (243, 150, 13), 'Liten kuling (10,8-13,7 m/s)'),
CLTitem(8.0, 10.7, (243, 234, 13), 'Frisk bris (8-10,7 m/s)'),
CLTitem(5.5, 7.9, (182, 243, 13), 'Laber bris (5,5-7,9 m/s)'),
CLTitem(3.4, 5.4, (48, 243, 13), 'Lett bris (3,4-5,4 m/s)'),
CLTitem(1.6, 3.3, (13, 243, 115), 'Svak vind (1,6-3,3 m/s)'),
CLTitem(0.0, 1.6, (174, 174, 174), 'Vindstille (<1,6 m/s)'),
CLTitem(300.1, FloatFillValue, (255, 255, 255), 'Ingen data')
]
cltfile = CLT()
cltfile.new(hdr, cltlist)
cltfile.write(r"Z:\tmp\wind_10m_daily\max_wind_speed_10_no.clt")