def _bm_load_ply(verts: torch.Tensor, faces: torch.Tensor,
decimal_places: int):
f = StringIO()
save_ply(f, verts, faces, decimal_places)
s = f.getvalue()
# Recreate stream so it's unaffected by how it was created.
return lambda: load_ply(StringIO(s))
def test_simple_save(self):
verts = torch.tensor(
[[0, 0, 0], [0, 0, 1], [0, 1, 0], [1, 0, 0], [1, 2, 0]],
dtype=torch.float32)
faces = torch.tensor([[0, 1, 2], [0, 3, 4]])
for filetype in BytesIO, TemporaryFile:
lengths = {}
for ascii in [True, False]:
file = filetype()
save_ply(file, verts=verts, faces=faces, ascii=ascii)
lengths[ascii] = file.tell()
file.seek(0)
verts2, faces2 = load_ply(file)
self.assertClose(verts, verts2)
self.assertClose(faces, faces2)
file.seek(0)
if ascii:
file.read().decode("ascii")
else:
with self.assertRaises(UnicodeDecodeError):
file.read().decode("ascii")
if filetype is TemporaryFile:
file.close()
self.assertLess(lengths[False], lengths[True],
"ascii should be longer")
def bm_load_simple_ply_with_init(V: int, F: int):
verts = torch.tensor([[0.1, 0.2, 0.3]]).expand(V, 3)
faces = torch.tensor([[0, 1, 2]], dtype=torch.int64).expand(F, 3)
ply_file = StringIO()
save_ply(ply_file, verts=verts, faces=faces)
ply = ply_file.getvalue()
# Recreate stream so it's unaffected by how it was created.
return lambda: load_ply(StringIO(ply))
def test_simple_save(self):
verts = torch.tensor([[0, 0, 0], [0, 0, 1], [0, 1, 0], [1, 0, 0]],
dtype=torch.float32)
faces = torch.tensor([[0, 1, 2], [0, 3, 4]])
file = StringIO()
save_ply(file, verts=verts, faces=faces)
file.seek(0)
verts2, faces2 = load_ply(file)
self.assertClose(verts, verts2)
self.assertClose(faces, faces2)
def _test_save_load(self, verts, faces):
f = StringIO()
save_ply(f, verts, faces)
f.seek(0)
# raise Exception(f.getvalue())
expected_verts, expected_faces = verts, faces
if not len(expected_verts): # Always compare with a (V, 3) tensor
expected_verts = torch.zeros(size=(0, 3), dtype=torch.float32)
if not len(expected_faces): # Always compare with an (F, 3) tensor
expected_faces = torch.zeros(size=(0, 3), dtype=torch.int64)
actual_verts, actual_faces = load_ply(f)
self.assertClose(expected_verts, actual_verts)
self.assertClose(expected_faces, actual_faces)
def test_load_simple_ascii(self):
ply_file = "\n".join(CUBE_PLY_LINES)
for line_ending in [None, "\n", "\r\n"]:
if line_ending is None:
stream = StringIO(ply_file)
else:
byte_file = ply_file.encode("ascii")
if line_ending == "\r\n":
byte_file = byte_file.replace(b"\n", b"\r\n")
stream = BytesIO(byte_file)
verts, faces = load_ply(stream)
self.assertEqual(verts.shape, (8, 3))
self.assertEqual(faces.shape, (12, 3))
self.assertClose(verts, torch.FloatTensor(CUBE_VERTS))
self.assertClose(faces, torch.LongTensor(CUBE_FACES))
def test_load_simple_ascii(self):
ply_file = "\n".join([
"ply",
"format ascii 1.0",
"comment made by Greg Turk",
"comment this file is a cube",
"element vertex 8",
"property float x",
"property float y",
"property float z",
"element face 6",
"property list uchar int vertex_index",
"end_header",
"0 0 0",
"0 0 1",
"0 1 1",
"0 1 0",
"1 0 0",
"1 0 1",
"1 1 1",
"1 1 0",
"4 0 1 2 3",
"4 7 6 5 4",
"4 0 4 5 1",
"4 1 5 6 2",
"4 2 6 7 3",
"4 3 7 4 0",
])
for line_ending in [None, "\n", "\r\n"]:
if line_ending is None:
stream = StringIO(ply_file)
else:
byte_file = ply_file.encode("ascii")
if line_ending == "\r\n":
byte_file = byte_file.replace(b"\n", b"\r\n")
stream = BytesIO(byte_file)
verts, faces = load_ply(stream)
self.assertEqual(verts.shape, (8, 3))
self.assertEqual(faces.shape, (12, 3))
verts_expected = [
[0, 0, 0],
[0, 0, 1],
[0, 1, 1],
[0, 1, 0],
[1, 0, 0],
[1, 0, 1],
[1, 1, 1],
[1, 1, 0],
]
self.assertClose(verts, torch.FloatTensor(verts_expected))
faces_expected = [
[0, 1, 2],
[7, 6, 5],
[0, 4, 5],
[1, 5, 6],
[2, 6, 7],
[3, 7, 4],
[0, 2, 3],
[7, 5, 4],
[0, 5, 1],
[1, 6, 2],
[2, 7, 3],
[3, 4, 0],
]
self.assertClose(faces, torch.LongTensor(faces_expected))
def test_bad_ply_syntax(self):
"""Some syntactically bad ply files."""
lines = [
"ply",
"format ascii 1.0",
"comment dashfadskfj;k",
"element vertex 1",
"property float x",
"element listy 1",
"property list uint int x",
"end_header",
"0",
"0",
]
lines2 = lines.copy()
# this is ok
_load_ply_raw(StringIO("\n".join(lines2)))
lines2 = lines.copy()
lines2[0] = "PLY"
with self.assertRaisesRegex(ValueError, "Invalid file header."):
_load_ply_raw(StringIO("\n".join(lines2)))
lines2 = lines.copy()
lines2[2] = "#this is a comment"
with self.assertRaisesRegex(ValueError, "Invalid line.*"):
_load_ply_raw(StringIO("\n".join(lines2)))
lines2 = lines.copy()
lines2[3] = lines[4]
lines2[4] = lines[3]
with self.assertRaisesRegex(
ValueError, "Encountered property before any element."):
_load_ply_raw(StringIO("\n".join(lines2)))
lines2 = lines.copy()
lines2[8] = "1 2"
with self.assertRaisesRegex(ValueError,
"Inconsistent data for vertex."):
_load_ply_raw(StringIO("\n".join(lines2)))
lines2 = lines[:-1]
with self.assertRaisesRegex(ValueError, "Not enough data for listy."):
_load_ply_raw(StringIO("\n".join(lines2)))
lines2 = lines.copy()
lines2[5] = "element listy 2"
with self.assertRaisesRegex(ValueError, "Not enough data for listy."):
_load_ply_raw(StringIO("\n".join(lines2)))
lines2 = lines.copy()
lines2.insert(4, "property short x")
with self.assertRaisesRegex(
ValueError, "Cannot have two properties called x in vertex."):
_load_ply_raw(StringIO("\n".join(lines2)))
lines2 = lines.copy()
lines2.insert(4, "property zz short")
with self.assertRaisesRegex(ValueError, "Invalid datatype: zz"):
_load_ply_raw(StringIO("\n".join(lines2)))
lines2 = lines.copy()
lines2.append("3")
with self.assertRaisesRegex(ValueError, "Extra data at end of file."):
_load_ply_raw(StringIO("\n".join(lines2)))
lines2 = lines.copy()
lines2.append("comment foo")
with self.assertRaisesRegex(ValueError, "Extra data at end of file."):
_load_ply_raw(StringIO("\n".join(lines2)))
lines2 = lines.copy()
lines2.insert(4, "element bad 1")
with self.assertRaisesRegex(ValueError,
"Found an element with no properties."):
_load_ply_raw(StringIO("\n".join(lines2)))
lines2 = lines.copy()
lines2[-1] = "3 2 3 3"
_load_ply_raw(StringIO("\n".join(lines2)))
lines2 = lines.copy()
lines2[-1] = "3 1 2 3 4"
msg = "A line of listy data did not have the specified length."
with self.assertRaisesRegex(ValueError, msg):
_load_ply_raw(StringIO("\n".join(lines2)))
lines2 = lines.copy()
lines2[3] = "element vertex one"
msg = "Number of items for vertex was not a number."
with self.assertRaisesRegex(ValueError, msg):
_load_ply_raw(StringIO("\n".join(lines2)))
# Heterogenous cases
lines2 = lines.copy()
lines2.insert(4, "property double y")
with self.assertRaisesRegex(ValueError,
"Too little data for an element."):
_load_ply_raw(StringIO("\n".join(lines2)))
lines2[-2] = "3.3 4.2"
_load_ply_raw(StringIO("\n".join(lines2)))
lines2[-2] = "3.3 4.3 2"
with self.assertRaisesRegex(ValueError,
"Too much data for an element."):
_load_ply_raw(StringIO("\n".join(lines2)))
# Now make the ply file actually be readable as a Mesh
with self.assertRaisesRegex(ValueError,
"The ply file has no face element."):
load_ply(StringIO("\n".join(lines)))
lines2 = lines.copy()
lines2[5] = "element face 1"
with self.assertRaisesRegex(ValueError, "Invalid vertices in file."):
load_ply(StringIO("\n".join(lines2)))
lines2.insert(5, "property float z")
lines2.insert(5, "property float y")
lines2[-2] = "0 0 0"
lines2[-1] = ""
with self.assertRaisesRegex(ValueError, "Not enough data for face."):
load_ply(StringIO("\n".join(lines2)))
lines2[-1] = "2 0 0"
with self.assertRaisesRegex(ValueError,
"Faces must have at least 3 vertices."):
load_ply(StringIO("\n".join(lines2)))
# Good one
lines2[-1] = "3 0 0 0"
load_ply(StringIO("\n".join(lines2)))
def load_mesh():
ply_file = StringIO(ply)
verts, faces = load_ply(ply_file)
def test_load_simple_ascii(self):
ply_file = '\n'.join(
[
'ply',
'format ascii 1.0',
'comment made by Greg Turk',
'comment this file is a cube',
'element vertex 8',
'property float x',
'property float y',
'property float z',
'element face 6',
'property list uchar int vertex_index',
'end_header',
'0 0 0',
'0 0 1',
'0 1 1',
'0 1 0',
'1 0 0',
'1 0 1',
'1 1 1',
'1 1 0',
'4 0 1 2 3',
'4 7 6 5 4',
'4 0 4 5 1',
'4 1 5 6 2',
'4 2 6 7 3',
'4 3 7 4 0',
]
)
for line_ending in [None, '\n', '\r\n']:
if line_ending is None:
stream = StringIO(ply_file)
else:
byte_file = ply_file.encode('ascii')
if line_ending == '\r\n':
byte_file = byte_file.replace(b'\n', b'\r\n')
stream = BytesIO(byte_file)
verts, faces = load_ply(stream)
self.assertEqual(verts.shape, (8, 3))
self.assertEqual(faces.shape, (12, 3))
verts_expected = [
[0, 0, 0],
[0, 0, 1],
[0, 1, 1],
[0, 1, 0],
[1, 0, 0],
[1, 0, 1],
[1, 1, 1],
[1, 1, 0],
]
self.assertClose(verts, torch.FloatTensor(verts_expected))
faces_expected = [
[0, 1, 2],
[7, 6, 5],
[0, 4, 5],
[1, 5, 6],
[2, 6, 7],
[3, 7, 4],
[0, 2, 3],
[7, 5, 4],
[0, 5, 1],
[1, 6, 2],
[2, 7, 3],
[3, 4, 0],
]
self.assertClose(faces, torch.LongTensor(faces_expected))
def test_bad_ply_syntax(self):
"""Some syntactically bad ply files."""
lines = [
'ply',
'format ascii 1.0',
'comment dashfadskfj;k',
'element vertex 1',
'property float x',
'element listy 1',
'property list uint int x',
'end_header',
'0',
'0',
]
lines2 = lines.copy()
# this is ok
_load_ply_raw(StringIO('\n'.join(lines2)))
lines2 = lines.copy()
lines2[0] = 'PLY'
with self.assertRaisesRegex(ValueError, 'Invalid file header.'):
_load_ply_raw(StringIO('\n'.join(lines2)))
lines2 = lines.copy()
lines2[2] = '#this is a comment'
with self.assertRaisesRegex(ValueError, 'Invalid line.*'):
_load_ply_raw(StringIO('\n'.join(lines2)))
lines2 = lines.copy()
lines2[3] = lines[4]
lines2[4] = lines[3]
with self.assertRaisesRegex(
ValueError, 'Encountered property before any element.'
):
_load_ply_raw(StringIO('\n'.join(lines2)))
lines2 = lines.copy()
lines2[8] = '1 2'
with self.assertRaisesRegex(
ValueError, 'Inconsistent data for vertex.'
):
_load_ply_raw(StringIO('\n'.join(lines2)))
lines2 = lines[:-1]
with self.assertRaisesRegex(ValueError, 'Not enough data for listy.'):
_load_ply_raw(StringIO('\n'.join(lines2)))
lines2 = lines.copy()
lines2[5] = 'element listy 2'
with self.assertRaisesRegex(ValueError, 'Not enough data for listy.'):
_load_ply_raw(StringIO('\n'.join(lines2)))
lines2 = lines.copy()
lines2.insert(4, 'property short x')
with self.assertRaisesRegex(
ValueError, 'Cannot have two properties called x in vertex.'
):
_load_ply_raw(StringIO('\n'.join(lines2)))
lines2 = lines.copy()
lines2.insert(4, 'property zz short')
with self.assertRaisesRegex(ValueError, 'Invalid datatype: zz'):
_load_ply_raw(StringIO('\n'.join(lines2)))
lines2 = lines.copy()
lines2.append('3')
with self.assertRaisesRegex(ValueError, 'Extra data at end of file.'):
_load_ply_raw(StringIO('\n'.join(lines2)))
lines2 = lines.copy()
lines2.append('comment foo')
with self.assertRaisesRegex(ValueError, 'Extra data at end of file.'):
_load_ply_raw(StringIO('\n'.join(lines2)))
lines2 = lines.copy()
lines2.insert(4, 'element bad 1')
with self.assertRaisesRegex(
ValueError, 'Found an element with no properties.'
):
_load_ply_raw(StringIO('\n'.join(lines2)))
lines2 = lines.copy()
lines2[-1] = '3 2 3 3'
_load_ply_raw(StringIO('\n'.join(lines2)))
lines2 = lines.copy()
lines2[-1] = '3 1 2 3 4'
msg = 'A line of listy data did not have the specified length.'
with self.assertRaisesRegex(ValueError, msg):
_load_ply_raw(StringIO('\n'.join(lines2)))
lines2 = lines.copy()
lines2[3] = 'element vertex one'
msg = 'Number of items for vertex was not a number.'
with self.assertRaisesRegex(ValueError, msg):
_load_ply_raw(StringIO('\n'.join(lines2)))
# Heterogenous cases
lines2 = lines.copy()
lines2.insert(4, 'property double y')
with self.assertRaisesRegex(
ValueError, 'Too little data for an element.'
):
_load_ply_raw(StringIO('\n'.join(lines2)))
lines2[-2] = '3.3 4.2'
_load_ply_raw(StringIO('\n'.join(lines2)))
lines2[-2] = '3.3 4.3 2'
with self.assertRaisesRegex(
ValueError, 'Too much data for an element.'
):
_load_ply_raw(StringIO('\n'.join(lines2)))
# Now make the ply file actually be readable as a Mesh
with self.assertRaisesRegex(
ValueError, 'The ply file has no face element.'
):
load_ply(StringIO('\n'.join(lines)))
lines2 = lines.copy()
lines2[5] = 'element face 1'
with self.assertRaisesRegex(ValueError, 'Invalid vertices in file.'):
load_ply(StringIO('\n'.join(lines2)))
lines2.insert(5, 'property float z')
lines2.insert(5, 'property float y')
lines2[-2] = '0 0 0'
lines2[-1] = ''
with self.assertRaisesRegex(ValueError, 'Not enough data for face.'):
load_ply(StringIO('\n'.join(lines2)))
lines2[-1] = '2 0 0'
with self.assertRaisesRegex(
ValueError, 'Faces must have at least 3 vertices.'
):
load_ply(StringIO('\n'.join(lines2)))
# Good one
lines2[-1] = '3 0 0 0'
load_ply(StringIO('\n'.join(lines2)))
