def test_enable(parse_options):
assert parse_options, "Invalid run settings"
opts = parse_options
ip_address = opts['ip-address'] # set the ip address of the device to test
machine_port = 4370
z = pyzatt.ZKSS()
z.connect_net(ip_address, machine_port)
z.disable_device()
misc.print_header("Eneabling device")
z.enable_device()
z.disconnect()
def test_enroll(parse_options):
assert parse_options, "Invalid run settings"
opts = parse_options
ip_address = opts['ip-address'] # set the ip address of the device to test
machine_port = 4370
z = pyzatt.ZKSS()
z.connect_net(ip_address, machine_port)
misc.print_header("1. Enrolling a users fingerprints")
misc.print_info("Before enrolling users")
z.read_all_user_id()
z.read_all_fptmp()
z.print_users_summary()
misc.print_info("Enrolling User 1")
user1_id = "8888"
user1_fp_idx = 4
enroll(z_inst=z, id=user1_id, fp_idx=user1_fp_idx, fp_flag=1)
z.disable_device()
with open('fp1.bin', 'wb') as outfile:
outfile.write(z.download_fp(user1_id, user1_fp_idx))
z.enable_device()
misc.print_info("Enrolling User 2")
user2_id = "9999"
user2_fp_idx = 3
enroll(id=user2_id, fp_idx=user2_fp_idx, fp_flag=1)
z.disable_device()
with open('fp2.bin', 'wb') as outfile:
outfile.write(z.download_fp(user2_id, user2_fp_idx))
misc.print_info("After enrolling users")
z.read_all_user_id()
z.read_all_fptmp()
z.print_users_summary()
z.enable_device()
z.disconnect()
def test_data_record(parse_options):
assert parse_options, "Invalid run settings"
opts = parse_options
ip_address = opts['ip-address'] # set the ip address of the device to test
machine_port = 4370
z = pyzatt.ZKSS()
misc.print_header("TEST OF DATA-RECORD FUNCTIONS")
misc.print_header("1.Read attendance log test")
misc.print_info("First, connect to the device and then disable the device")
z.connect_net(ip_address, machine_port)
z.disable_device()
z.read_att_log()
z.print_attlog()
# print_info("Clear attendance log")
# z.clear_att_log()
# z.read_att_log()
# z.print_attlog()
misc.print_header("2.Read operation log test")
z.read_op_log()
z.print_oplog()
# print_info("Clear operation log")
# z.clear_log()
# z.read_op_log()
# z.print_oplog()
# finally enable the device and terminate the connection
z.enable_device()
z.disconnect()
def test_data_user(parse_options):
assert parse_options, "Invalid run settings"
opts = parse_options
ip_address = opts['ip-address'] # set the ip address of the device to test
machine_port = 4370
misc.print_header("TEST OF DATA-USER FUNCTIONS")
z = pyzatt.ZKSS()
z.connect_net(ip_address, machine_port)
z.disable_device()
misc.print_header("1.Read all user info")
# delete user if it exists
user1_id = "5555"
if z.id_exists(user1_id):
z.delete_user(user1_id)
z.read_all_user_id()
z.read_all_fptmp()
z.print_users_summary()
misc.print_header("2.Changing verification mode")
# set user params
z.set_user_info(user_id=user1_id,
name="Dummy 1",
password="******",
card_no=333,
admin_lv=0,
neg_enabled=0,
user_group=1,
user_tzs=[1, 0, 0])
z.read_all_user_id()
z.set_verify_style(user1_id, DEFS.GROUP_VERIFY)
print("User: %s" % user1_id)
print("Verify style: %i" % z.get_verify_style(user1_id))
z.set_verify_style(user1_id, DEFS.FPorRF)
print("New verify style: %i" % z.get_verify_style(user1_id))
misc.print_header("3. Clear and set password")
print("Users password: %s" % z.get_password(user1_id))
z.clear_password(user1_id)
z.set_password(user1_id, "99")
print("New password is: %s" % z.get_password(user1_id))
misc.print_header("4. Uploading/deleteting templates")
fp1_tmp = bytearray()
fp1_fn = 'fp1.bin' # filename template 1
fp1_idx = 8 # finger index template 1
fp1_flg = 1 # finger flag template 1
fp2_tmp = bytearray()
fp2_fn = 'fp2.bin' # filename template 2
fp2_idx = 7 # finger index template 2
fp2_flg = 3 # finger flag template 2, duress
# delete the templates if they already exists
z.delete_fp(user1_id, fp1_idx)
z.delete_fp(user1_id, fp2_idx)
# read previously generated templates
if os.path.isfile(fp1_fn) and os.path.isfile(fp2_fn):
with open(fp1_fn, 'rb') as infile:
fp1_tmp = infile.read()
with open(fp2_fn, 'rb') as infile:
fp2_tmp = infile.read()
misc.print_info("Uploading templates")
print("Upload template 1, user= %s, finger=%i, flag=%i" %
(user1_id, fp1_idx, fp1_flg))
z.upload_fp(user1_id, fp1_tmp, fp1_idx, fp1_flg)
print("Upload template 2, user= %s, finger=%i, flag=%i" %
(user1_id, fp2_idx, fp2_flg))
z.upload_fp(user1_id, fp2_tmp, fp2_idx, fp2_flg)
misc.print_info("Now the templates should be available")
z.read_all_user_id()
z.read_all_fptmp()
z.print_users_summary()
else:
print("Run the script test_data_other.py before this script!")
z.enable_device()
z.disconnect()
return
ans = input("Delete user %s, y/n: " % user1_id)
if ans == 'y':
z.delete_user(user1_id)
else:
misc.print_info("Now you may go and test both finger templates")
misc.print_header("")
z.read_all_user_id()
z.read_all_fptmp()
z.print_users_summary()
z.enable_device()
z.disconnect()
def test_multiple_realtime():
# constant machine port
machine_port = 4370
# define a list of ip addresses instead
ip_addresses = ['192.168.19.152', '192.168.19.153', '192.168.19.154']
# a list of ZKSS objects is needed to keep each
# connection alive and separate
zkss = [pyzatt.ZKSS() for x in range(len(ip_addresses))]
# a dict is created
zk_dev = zip(ip_addresses, zkss)
misc.print_header("TEST OF REALTIME FUNCTIONS FROM MULTIPLE DEVICES")
print(zkss)
# connect and enable realtime for each device
for [ip_addr, z] in zk_dev:
print(ip_addr, z)
continue
# connection
z.connect_net(ip_addr, machine_port)
# read user ids
z.disable_device()
z.read_all_user_id()
z.enable_device()
# enable the report of rt packets
z.enable_realtime()
misc.print_info("Ready to receive events from the machines")
try:
while True:
for [ip_addr, z] in zk_dev:
# wait for event
z.recv_event()
ev = z.get_last_event()
# process the event
print("\n" + "#" * 50)
print("Received event from:", ip_addr)
if ev == DEFS.EF_ALARM:
print("EF_ALARM:")
alarm_code = z.parse_alarm_type()
# check alarm source
if alarm_code == 0x3A:
# misoperation
print("Misoperation alarm!")
elif alarm_code == 0x37:
# tamper
print("Tampering alarm!")
elif alarm_code == 0x35:
# exit button
print("Exit button pressed!")
elif alarm_code == 0x54:
# door is closing
print("Door is closing")
elif alarm_code == 0xffffffff:
# duress alarm
durr_type = z.parse_duress_alarm()[0]
if durr_type == 0x20:
print("Duress alarm!")
print("User index: %s, matching type: %i" %
tuple(z.parse_duress_alarm()[1:]))
elif durr_type == 0x22:
print("Passback alarm!")
else:
print("Unknown duress alarm")
else:
print("Unknown alarm")
elif ev == DEFS.EF_ATTLOG:
print("EF_ATTLOG: New attendance entry")
print("User id: %s, verify type %i, date: %s" %
tuple(z.parse_event_attlog()))
elif ev == DEFS.EF_FINGER:
print("EF_FINGER: Finger placed on reader")
elif ev == DEFS.EF_ENROLLUSER:
print("EF_ENROLLUSER: Enrolled user")
elif ev == DEFS.EF_ENROLLFINGER:
print("EF_ENROLLFINGER: Enroll finger finished")
print("Successful: %s, user ID: %s, finger index: %s, "
"size fp template: %i" %
tuple(z.parse_event_enroll_fp()))
elif ev == DEFS.EF_BUTTON:
print("EF_BUTTON: Pressed button")
elif ev == DEFS.EF_UNLOCK:
print("EF_UNLOCK: Unlock event")
elif ev == DEFS.EF_VERIFY:
print("EF_VERIFY: Verified user")
user_sn = z.parse_verify_event()
if user_sn == 0xffffffff:
user_id = '-1'
else:
user_id = z.users[user_sn].user_id
print("User id: %s" % user_id)
elif ev == DEFS.EF_FPFTR:
print("EF_FPFTR: ")
print("Score: %i" % z.parse_score_fp_event())
else:
print("Unknown event:")
misc.print_hex(z.get_last_packet())
except KeyboardInterrupt:
misc.print_info("\nExiting...")
for [ip_addr, z] in zk_dev:
z.disconnect()
def test_realtime(parse_options):
assert parse_options, "Invalid run settings"
opts = parse_options
ip_address = opts['ip-address'] # set the ip address of the device to test
machine_port = 4370
z = pyzatt.ZKSS()
misc.print_header("TEST OF REALTIME FUNCTIONS")
# connection
misc.print_header("1.Realtime Test")
z.connect_net(ip_address, machine_port)
# read user ids
z.disable_device()
z.read_all_user_id()
z.enable_device()
# enable the report of rt packets
z.enable_realtime()
misc.print_info("Ready to receive events from the machine")
try:
while True:
# wait for event
z.recv_event()
ev = z.get_last_event()
# process the event
print("\n" + "#" * 50)
print("Received event")
if ev == DEFS.EF_ALARM:
print("EF_ALARM:")
alarm_code = z.parse_alarm_type()
# check alarm source
if alarm_code == 0x3A:
# misoperation
print("Misoperation alarm!")
elif alarm_code == 0x37:
# tamper
print("Tampering alarm!")
elif alarm_code == 0x35:
# exit button
print("Exit button pressed!")
elif alarm_code == 0x54:
# door is closing
print("Door is closing")
elif alarm_code == 0xffffffff:
# duress alarm
durr_type = z.parse_duress_alarm()[0]
if durr_type == 0x20:
print("Duress alarm!")
print("User index: %s, matching type: %i" %
tuple(z.parse_duress_alarm()[1:]))
elif durr_type == 0x22:
print("Passback alarm!")
else:
print("Unknown duress alarm")
else:
print("Unknown alarm")
elif ev == DEFS.EF_ATTLOG:
print("EF_ATTLOG: New attendance entry")
print("User id: %s, verify type %i, date: %s" %
tuple(z.parse_event_attlog()))
elif ev == DEFS.EF_FINGER:
print("EF_FINGER: Finger placed on reader")
elif ev == DEFS.EF_ENROLLUSER:
print("EF_ENROLLUSER: Enrolled user")
elif ev == DEFS.EF_ENROLLFINGER:
print("EF_ENROLLFINGER: Enroll finger finished")
print("Successful: %s, user ID: %s, finger index: %s, "
"size fp template: %i" %
tuple(z.parse_event_enroll_fp()))
elif ev == DEFS.EF_BUTTON:
print("EF_BUTTON: Pressed button")
elif ev == DEFS.EF_UNLOCK:
print("EF_UNLOCK: Unlock event")
elif ev == DEFS.EF_VERIFY:
print("EF_VERIFY: Verified user")
user_sn = z.parse_verify_event()
if user_sn == 0xffffffff:
user_id = '-1'
else:
user_id = z.users[user_sn].user_id
print("User id: %s" % user_id)
elif ev == DEFS.EF_FPFTR:
print("EF_FPFTR: ")
print("Score: %i" % z.parse_score_fp_event())
else:
print("Unknown event:")
misc.print_hex(z.get_last_packet())
except KeyboardInterrupt:
misc.print_info("\nExiting...")
z.disconnect()
def test_access(parse_options):
assert parse_options, "Invalid run settings"
opts = parse_options
ip_address = opts['ip-address'] # set the ip address of the device to test
machine_port = 4370
misc.print_header("TEST OF ACCESS FUNCTIONS")
z = pyzatt.ZKSS()
z.connect_net(ip_address, machine_port)
z.disable_device()
misc.print_header("1.Read all user info")
# delete test uses if they exists
user1_id = "5555"
user2_id = "6666"
if z.id_exists(user1_id):
z.delete_user(user1_id)
z.delete_user(user2_id)
z.read_all_user_id()
z.read_all_fptmp()
z.print_users_summary()
misc.print_header("2.Create users and upload fingerprints")
z.set_user_info(user_id=user1_id,
name="Dummy 1",
password="******",
card_no=333,
admin_lv=0,
neg_enabled=0,
user_group=1,
user_tzs=[1, 0, 0])
z.set_user_info(user_id=user2_id,
name="Dummy 2",
password="******",
card_no=777,
admin_lv=0,
neg_enabled=0,
user_group=1,
user_tzs=[1, 0, 0])
z.read_all_user_id()
z.set_verify_style(user1_id, DEFS.GROUP_VERIFY)
z.set_verify_style(user2_id, DEFS.GROUP_VERIFY)
fp1_tmp = bytearray()
fp1_fn = 'fp1.bin' # filename template 1
fp1_idx = 8 # finger index template 1
fp1_flg = 1 # finger flag template 1
fp2_tmp = bytearray()
fp2_fn = 'fp2.bin' # filename template 2
fp2_idx = 7 # finger index template 2
fp2_flg = 1 # finger flag template 2, duress
# read previously generated templates
if os.path.isfile(fp1_fn) and os.path.isfile(fp2_fn):
with open(fp1_fn, 'rb') as infile:
fp1_tmp = infile.read()
with open(fp2_fn, 'rb') as infile:
fp2_tmp = infile.read()
misc.print_info("Uploading templates")
print("Upload template 1, user= %s, finger=%i, flag=%i" %
(user1_id, fp1_idx, fp1_flg))
z.upload_fp(user1_id, fp1_tmp, fp1_idx, fp1_flg)
print("Upload template 2, user= %s, finger=%i, flag=%i" %
(user1_id, fp2_idx, fp2_flg))
z.upload_fp(user2_id, fp2_tmp, fp2_idx, fp2_flg)
misc.print_info("Now the templates should be available")
z.read_all_user_id()
z.read_all_fptmp()
z.print_users_summary()
else:
print("Run the script test_data_other.py before this script!")
z.enable_device()
z.disconnect()
misc.print_header("3. Set/get timezones")
print("Timezone 1:", z.get_tz_info(1))
z.set_tz_info(49, z.get_tz_info(1))
tz49 = z.get_tz_info(49)
print("Timezone 49:", tz49)
sat_tz = [5, 33, 23, 20]
print("Changing Sat tz:", sat_tz)
tz49[6] = sat_tz
z.set_tz_info(49, tz49) # uploading update timezone
print("New timezone 49:", z.get_tz_info(49))
misc.print_header("4. Creating groups")
z.set_group_info([35, [1, 49], 0, 1])
z.set_group_info([36, [1, 49], 0, 1])
print("Group 35: %s" % z.get_group_info(35))
print("Group 36: %s" % z.get_group_info(36))
print("Adding user %s to group 35" % user1_id)
print("Adding user %s to group 36" % user2_id)
z.set_user_group(user1_id, 35)
z.set_user_group(user2_id, 36)
print("New group of user %s: %i" % (user1_id, z.get_user_group(user1_id)))
print("New group of user %s: %i" % (user2_id, z.get_user_group(user2_id)))
z.read_all_user_id()
z.read_all_fptmp()
z.print_users_summary()
misc.print_header("5. Users timezones")
for n in range(3):
tz_no = 40 + n
print("Creating timezone: ", tz_no)
z.set_tz_info(tz_no, z.get_tz_info(1))
print("Setting user %s timezones" % user1_id)
user1_tzs = [40, 41, 42]
z.set_user_tzs(user1_id, user1_tzs)
print("User %s should be using timezones: %s" % (user1_id, user1_tzs))
print("Making user %s, use group's timezones" % user2_id)
z.disable_user_tzs(user2_id)
z.read_all_user_id()
z.print_users_summary()
misc.print_header("6. Unlock combinations")
misc.print_info("Creating unlock combination")
z.set_unlock_comb(9, [35, 36])
print("Created unlock combination %i, with groups: %s" %
(9, z.get_unlock_comb(9)))
misc.print_header("7. Unlock door")
print("Door unlock: 20 seconds")
time.sleep(10)
z.door_unlock(20)
misc.print_header("")
misc.print_info("Now to test this configuration, press [n], go to the"
"device and you should need both fingers (corresponding "
"to the templates) to get access, because both belong to "
"different users and from different groups, and they are "
"in an unlock combination.")
ans = input("Delete users %s, y/n: " % user1_id)
if ans == 'y':
z.delete_user(user1_id)
z.delete_user(user2_id)
else:
misc.print_info("Now you may go and test access with "
"both finger templates")
misc.print_header("")
z.read_all_user_id()
z.read_all_fptmp()
z.print_users_summary()
z.enable_device()
z.disconnect()
def test_terminal(parse_options):
assert parse_options, "Invalid run settings"
opts = parse_options
ip_address = opts['ip-address'] # set the ip address of the device to test
machine_port = 4370
z = pyzatt.ZKSS()
misc.print_header("TEST OF TERMINAL FUNCTIONS")
# connection
misc.print_header("1.Connection Test")
misc.print_info("First, connect to the device and then disable the device")
z.connect_net(ip_address, machine_port)
z.disable_device()
# get/set time
misc.print_header("2.Set/Get time test")
misc.print_info("The time is ")
misc.print_info("Get current time")
print(z.get_device_time())
misc.print_info("Set a new time")
z.set_device_time(datetime.datetime(2018, 1, 1, 18, 17, 16))
print(z.get_device_time())
misc.print_info("Set the time to now")
z.set_device_time(datetime.datetime.now())
print(z.get_device_time())
# get status
misc.print_header("3.Get status test")
misc.print_info("You may request all the values")
stat_keys = defs.get_status_keys()
res = z.get_device_status(dict(zip(stat_keys, [-1]*len(stat_keys))))
for k in res:
print("{0} = {1}".format(k, res[k]))
misc.print_info("Or maybe just request a couple,"
" but in both cases the machine"
" reply has all the fields")
res = z.get_device_status({'attlog_count': -1,
'user_count': -1,
'admin_count': -1})
for k in res:
print("{0} = {1}".format(k, res[k]))
misc.print_info("So you may read the fields of a"
" previously requested status,"
" using the read_status function")
res = z.read_status(defs.STATUS['pwd_count'])
print("{0} = {1}".format('pwd_count', res))
# get more params
misc.print_header("4.Device info test")
misc.print_info("Some parameter requests:")
print('Vendor = ' + z.get_vendor())
print('Product code = |{0}|'.format(z.get_product_code()))
print('Product time = |{0}|'.format(z.get_product_time()))
print('card function = |{0}|'.format(z.get_cardfun()))
print('User max id width = |{0}|'.format(z.get_device_info('~PIN2Width')))
print('Firmware version = |{0}|'.format(z.get_firmware_version()))
misc.print_info("Some write operations:")
misc.print_info("Changing lock timer:")
print('Original value = |{0}|'.format(z.get_device_info('LockOn')))
z.set_device_info('LockOn', '8')
print('New value = |{0}|'.format(z.get_device_info('LockOn')))
z.set_device_info('LockOn', '5')
print('Back to default value = |{0}|'.format(z.get_device_info('LockOn')))
# get state
misc.print_header("5.Get device state")
print('Device state = |{0}|'.format(z.get_device_state()))
# finally enable the device and terminate the connection
z.enable_device()
z.disconnect()
