def makeGUI(self):
self.controls = {
k: QCustomSpinBox(k, (-2., 2.))
for k in hc.multipoles
}
self.controls['U1'] = QCustomSpinBox('U1', (-2., 2.))
self.controls['U2'] = QCustomSpinBox('U2', (0., 20.))
self.controls['U3'] = QCustomSpinBox('U3', (-2., 2.))
self.multipoleValues = {k: 0.0 for k in hc.multipoles}
self.ctrlLayout = QtGui.QVBoxLayout()
for k in hc.multipoles:
self.ctrlLayout.addWidget(self.controls[k])
self.multipoleFileSelectButton = QtGui.QPushButton('Set C File')
self.ctrlLayout.addWidget(self.multipoleFileSelectButton)
self.inputUpdated = False
self.timer = QtCore.QTimer(self)
self.timer.timeout.connect(self.sendToServer)
self.timer.start(UpdateTime)
for k in hc.multipoles:
self.controls[k].onNewValues.connect(self.inputHasUpdated)
self.multipoleFileSelectButton.released.connect(self.selectCFile)
self.setLayout(self.ctrlLayout)
yield self.followSignal(0, 0)
def makeGUI(self):
layout = QtGui.QGridLayout()
self.controlLabels = []
for i in range(1, Nelectrodes):
self.controlLabels.append(str(i))
self.controls = {}
for label in self.controlLabels:
if int(label) < 6:
self.controls[label] = QCustomSpinBox(label, (-30, 30))
elif int(label) < 15:
self.controls[label] = QCustomSpinBox(
str(int(label) - 5) + ' ', (-30, 30))
else:
self.controls[label] = QCustomSpinBox(str(int(label) - 5),
(-30, 30))
self.controlLabels.append('CNT')
self.controls['CNT'] = QCustomSpinBox('CNT', (-30, 30))
self.labelToNumber = {}
for l in self.controlLabels:
if l == 'CNT':
self.labelToNumber[l] = Nelectrodes
else:
self.labelToNumber[l] = int(l)
self.channelValues = {}
for k in self.controlLabels:
self.channelValues[k] = 0.0
smaBox = QtGui.QGroupBox('SMA Out')
smaLayout = QtGui.QGridLayout()
smaBox.setLayout(smaLayout)
elecBox = QtGui.QGroupBox('Electrodes')
elecLayout = QtGui.QGridLayout()
elecBox.setLayout(elecLayout)
layout.addWidget(smaBox, 0, 0)
layout.addWidget(elecBox, 0, 1)
for j in range(5):
smaLayout.addWidget(self.controls[str(j + 1)], j, 1)
for j in range(5, 16):
elecLayout.addWidget(self.controls[str(j + 1)], 16 - j, 1)
for j in range(16, 27):
elecLayout.addWidget(self.controls[str(j + 1)], 27 - j, 5)
elecLayout.addWidget(self.controls['CNT'], 12, 3)
layout.setColumnStretch(1, 1)
self.inputUpdated = False
self.timer = QtCore.QTimer(self)
self.timer.timeout.connect(self.sendToServer)
self.timer.start(UpdateTime)
for k in self.controlLabels:
self.controls[k].onNewValues.connect(self.inputHasUpdated(k))
self.setLayout(layout)
def makeGUI(self):
self.dacDict = dict(hc.elec_dict.items() + hc.sma_dict.items())
self.controls = {
k: QCustomSpinBox(k, self.dacDict[k].allowedVoltageRange)
for k in self.dacDict.keys()
}
layout = QtGui.QGridLayout()
elecBox = QtGui.QGroupBox('Channels')
elecLayout = QtGui.QVBoxLayout()
elecBox.setLayout(elecLayout)
layout.addWidget(elecBox, 0, 1)
elecList = hc.elec_dict.keys()
elecList.sort()
for i, e in enumerate(elecList):
elecLayout.addWidget(self.controls[e])
self.inputUpdated = False
self.timer = QtCore.QTimer(self)
self.timer.timeout.connect(self.sendToServer)
self.timer.start(UpdateTime)
for k in self.dacDict.keys():
self.controls[k].onNewValues.connect(self.inputHasUpdated(k))
layout.setColumnStretch(1, 1)
self.setLayout(layout)
def makeGUI(self):
self.multipoles = yield self.dacserver.get_multipole_names()
self.controls = {
k: QCustomSpinBox(k, (-20., 20.))
for k in self.multipoles
}
# for i,el in self.controls:
# el.spinLevel.setDecimals(4)
self.multipoleValues = {k: 0.0 for k in self.multipoles}
for k in self.multipoles:
self.ctrlLayout.addWidget(self.controls[k])
self.multipoleFileSelectButton = QtGui.QPushButton('Set C File')
self.ctrlLayout.addWidget(self.multipoleFileSelectButton)
self.inputUpdated = False
self.timer = QtCore.QTimer(self)
self.timer.timeout.connect(self.sendToServer)
self.timer.start(UpdateTime)
for k in self.multipoles:
self.controls[k].onNewValues.connect(self.inputHasUpdated)
self.multipoleFileSelectButton.released.connect(self.selectCFile)
self.setLayout(self.ctrlLayout)
yield self.followSignal(0, 0)
def makeGUI(self):
self.scan = False
self.counter = 0
self.timer = QtCore.QTimer(self)
self.timer.timeout.connect(self.scanner)
self.timer.start(ScanWait)
self.multipolelist = hc.default_multipoles
self.displays = {k: QtGui.QLCDNumber() for k in self.multipolelist}
layout = QtGui.QGridLayout()
Multipolebox = QtGui.QGroupBox('Multipoles')
multilayout = QtGui.QGridLayout()
self.startscanbutton = QtGui.QPushButton('Start Scan')
self.stopscanbutton = QtGui.QPushButton('Stop Scan')
self.counterdisplay = QCustomSpinBox('counter', [0, n**3])
Multipolebox.setLayout(multilayout)
layout.addWidget(Multipolebox, 0, 0)
i = 0
for e in self.multipolelist:
multilayout.addWidget(QtGui.QLabel(e), i, 0)
multilayout.addWidget(self.displays[e], i, 1)
i = i + 1
multilayout.addWidget(self.startscanbutton, i, 1)
multilayout.addWidget(self.stopscanbutton, i + 1, 1)
multilayout.addWidget(self.counterdisplay, i + 2, 1)
self.startscanbutton.pressed.connect(self.startscan)
self.stopscanbutton.pressed.connect(self.stopscan)
self.inputUpdated = False
self.timer = QtCore.QTimer(self)
self.timer.timeout.connect(self.updateCounter)
self.timer.start(ScanWait - 1)
self.counterdisplay.onNewValues.connect(self.inputHasUpdated())
self.setLayout(layout)
self.fields = scan_field(min, max, n)
def makeGUI(self):
self.dacDict = dict(hc.elecDict.items() + hc.smaDict.items())
self.controls = {
k: QCustomSpinBox(k, self.dacDict[k].allowedVoltageRange)
for k in self.dacDict.keys()
}
layout = QtGui.QGridLayout()
smaBox = QtGui.QGroupBox('SMA Out')
smaLayout = QtGui.QVBoxLayout()
smaBox.setLayout(smaLayout)
elecBox = QtGui.QGroupBox('Electrodes')
elecLayout = QtGui.QGridLayout()
elecBox.setLayout(elecLayout)
layout.addWidget(smaBox, 0, 0)
layout.addWidget(elecBox, 0, 1)
for k in hc.smaDict:
smaLayout.addWidget(self.controls[k],
alignment=QtCore.Qt.AlignRight)
for k in hc.elecDict:
if (int(k) == hc.centerElectrode):
labl = str(k) + '(CNT)'
self.controls[k].title.setText(labl)
elecLayout.addWidget(self.controls[k], hc.numElectrodes / 2, 1)
elif int(k) <= hc.numElectrodes / 2:
elecLayout.addWidget(self.controls[k],
hc.numElectrodes / 2 - int(k), 0)
elif int(k) > hc.numElectrodes / 2:
elecLayout.addWidget(self.controls[k],
hc.numElectrodes - 0 - int(k), 2)
elif (int(k) == hc.numElectrodes):
elecLayout.addWidget(self.controls[k],
hc.numElectrodes + 1 - int(k), 2)
spacer = QtGui.QSpacerItem(20, 40, QtGui.QSizePolicy.Minimum,
QtGui.QSizePolicy.MinimumExpanding)
smaLayout.addItem(spacer)
self.inputUpdated = False
self.timer = QtCore.QTimer(self)
self.timer.timeout.connect(self.sendToServer)
self.timer.start(UpdateTime)
for k in self.dacDict.keys():
self.controls[k].onNewValues.connect(self.inputHasUpdated(k))
layout.setColumnStretch(1, 1)
self.setLayout(layout)
def makeGUI(self):
self.scan = False
self.counter = 0
self.timer = QtCore.QTimer(self)
self.timer.timeout.connect(self.scanner)
self.timer.start(ScanWait)
self.multipolelist = hc.default_multipoles
self.displays = {k: QtGui.QLCDNumber() for k in self.multipolelist}
layout = QtGui.QGridLayout()
Multipolebox = QtGui.QGroupBox('Multipoles')
multilayout = QtGui.QGridLayout()
self.startscanbutton = QtGui.QPushButton('Start Scan')
self.stopscanbutton = QtGui.QPushButton('Stop Scan')
self.counterdisplay = QCustomSpinBox('counter',[0, n**3])
Multipolebox.setLayout(multilayout)
layout.addWidget(Multipolebox,0,0)
i = 0
for e in self.multipolelist:
multilayout.addWidget(QtGui.QLabel(e),i,0)
multilayout.addWidget(self.displays[e],i,1)
i = i+1
multilayout.addWidget(self.startscanbutton,i,1)
multilayout.addWidget(self.stopscanbutton,i+1,1)
multilayout.addWidget(self.counterdisplay,i+2,1)
self.startscanbutton.pressed.connect(self.startscan)
self.stopscanbutton.pressed.connect(self.stopscan)
self.inputUpdated = False
self.timer = QtCore.QTimer(self)
self.timer.timeout.connect(self.updateCounter)
self.timer.start(ScanWait - 1)
self.counterdisplay.onNewValues.connect(self.inputHasUpdated())
self.setLayout(layout)
self.fields = scan_field(min,max,n)
def makeGUI(self):
self.dacDict = dict(hc.elec_dict.items() + hc.sma_dict.items())
self.controls = {
k: QCustomSpinBox(hc.channel_name_dict[k],
self.dacDict[k].allowedVoltageRange)
for k in self.dacDict.keys()
}
layout = QtGui.QGridLayout()
elecBox = QtGui.QGroupBox('Laser Control')
elecLayout = QtGui.QVBoxLayout()
elecBox.setLayout(elecLayout)
layout.addWidget(elecBox, 0, 1)
elecList = hc.elec_dict.keys()
elecList.sort()
if bool(hc.centerElectrode):
elecList.pop(hc.centerElectrode - 1)
for i, e in enumerate(elecList):
if int(e) <= len(elecList) / 2:
elecLayout.addWidget(self.controls[e])
elif int(e) > len(elecList) / 2:
elecLayout.addWidget(self.controls[e])
spacer = QtGui.QSpacerItem(20, 40, QtGui.QSizePolicy.Minimum,
QtGui.QSizePolicy.MinimumExpanding)
self.inputUpdated = False
self.timer = QtCore.QTimer(self)
self.timer.timeout.connect(self.sendToServer)
self.timer.start(UpdateTime)
for k in self.dacDict.keys():
self.controls[k].onNewValues.connect(self.inputHasUpdated(k))
layout.setColumnStretch(1, 1)
self.setLayout(layout)
class MULTIPOLE_MONITOR(QtGui.QWidget): #######################################################
def __init__(self, reactor, parent=None):
super(MULTIPOLE_MONITOR, self).__init__(parent)
self.reactor = reactor
self.makeGUI()
self.connect()
def makeGUI(self):
self.scan = False
self.counter = 0
self.timer = QtCore.QTimer(self)
self.timer.timeout.connect(self.scanner)
self.timer.start(ScanWait)
self.multipolelist = hc.default_multipoles
self.displays = {k: QtGui.QLCDNumber() for k in self.multipolelist}
layout = QtGui.QGridLayout()
Multipolebox = QtGui.QGroupBox('Multipoles')
multilayout = QtGui.QGridLayout()
self.startscanbutton = QtGui.QPushButton('Start Scan')
self.stopscanbutton = QtGui.QPushButton('Stop Scan')
self.counterdisplay = QCustomSpinBox('counter',[0, n**3])
Multipolebox.setLayout(multilayout)
layout.addWidget(Multipolebox,0,0)
i = 0
for e in self.multipolelist:
multilayout.addWidget(QtGui.QLabel(e),i,0)
multilayout.addWidget(self.displays[e],i,1)
i = i+1
multilayout.addWidget(self.startscanbutton,i,1)
multilayout.addWidget(self.stopscanbutton,i+1,1)
multilayout.addWidget(self.counterdisplay,i+2,1)
self.startscanbutton.pressed.connect(self.startscan)
self.stopscanbutton.pressed.connect(self.stopscan)
self.inputUpdated = False
self.timer = QtCore.QTimer(self)
self.timer.timeout.connect(self.updateCounter)
self.timer.start(ScanWait - 1)
self.counterdisplay.onNewValues.connect(self.inputHasUpdated())
self.setLayout(layout)
self.fields = scan_field(min,max,n)
def inputHasUpdated(self):
def iu():
self.inputUpdated = True
self.counter = int(round(self.counterdisplay.spinLevel.value()))
return iu
def updateCounter(self):
if self.inputUpdated:
self.inputUpdated = False
else:
self.counterdisplay.setValues(self.counter)
def startscan(self):
self.scan = True
def stopscan(self):
self.scan = False
#######################################################
@inlineCallbacks
def scanner(self):
if self.scan == True:
el = self.fields[self.counter]
yield self.setmultipole(el)
self.counter = self.counter + 1
print(str((n**3- self.counter)*ScanWait/1000/60) + ' minutes left')
if self.counter == len(self.fields):
self.counter = 0
self.scan = False
print('scan done!')
@inlineCallbacks
def setmultipole(self, multipoles):
list1 = [('Ex',multipoles[0]),('Ey',multipoles[1]),('Ez',multipoles[2]),('U3',10)]
yield self.dacserver.set_multipole_values(list1)
yield self.connect()
@inlineCallbacks
def connect(self):
from labrad.wrappers import connectAsync
from labrad.types import Error
self.cxn = yield connectAsync()
self.dacserver = yield self.cxn.dac_server
self.ionInfo = {}
yield self.setupListeners()
yield self.followSignal(0, 0)
for i in hc.notused_dict: #Sets unused channels to about 0V
yield self.dacserver.set_individual_digital_voltages_u([(i, 32768)])
@inlineCallbacks
def setupListeners(self):
yield self.dacserver.signal__ports_updated(SIGNALID2)
yield self.dacserver.addListener(listener = self.followSignal, source = None, ID = SIGNALID2)
@inlineCallbacks
def followSignal(self, x, s):
av = yield self.dacserver.get_multipole_values()
brightness = 210
darkness = 255 - brightness
for (k, v) in av:
# print k
print v
self.displays[k].display(float(v))
def closeEvent(self, x):
self.reactor.stop()
class MULTIPOLE_MONITOR(
QtGui.QWidget
): #######################################################
def __init__(self, reactor, parent=None):
super(MULTIPOLE_MONITOR, self).__init__(parent)
self.reactor = reactor
self.makeGUI()
self.connect()
def makeGUI(self):
self.scan = False
self.counter = 0
self.timer = QtCore.QTimer(self)
self.timer.timeout.connect(self.scanner)
self.timer.start(ScanWait)
self.multipolelist = hc.default_multipoles
self.displays = {k: QtGui.QLCDNumber() for k in self.multipolelist}
layout = QtGui.QGridLayout()
Multipolebox = QtGui.QGroupBox('Multipoles')
multilayout = QtGui.QGridLayout()
self.startscanbutton = QtGui.QPushButton('Start Scan')
self.stopscanbutton = QtGui.QPushButton('Stop Scan')
self.counterdisplay = QCustomSpinBox('counter', [0, n**3])
Multipolebox.setLayout(multilayout)
layout.addWidget(Multipolebox, 0, 0)
i = 0
for e in self.multipolelist:
multilayout.addWidget(QtGui.QLabel(e), i, 0)
multilayout.addWidget(self.displays[e], i, 1)
i = i + 1
multilayout.addWidget(self.startscanbutton, i, 1)
multilayout.addWidget(self.stopscanbutton, i + 1, 1)
multilayout.addWidget(self.counterdisplay, i + 2, 1)
self.startscanbutton.pressed.connect(self.startscan)
self.stopscanbutton.pressed.connect(self.stopscan)
self.inputUpdated = False
self.timer = QtCore.QTimer(self)
self.timer.timeout.connect(self.updateCounter)
self.timer.start(ScanWait - 1)
self.counterdisplay.onNewValues.connect(self.inputHasUpdated())
self.setLayout(layout)
self.fields = scan_field(min, max, n)
def inputHasUpdated(self):
def iu():
self.inputUpdated = True
self.counter = int(round(self.counterdisplay.spinLevel.value()))
return iu
def updateCounter(self):
if self.inputUpdated:
self.inputUpdated = False
else:
self.counterdisplay.setValues(self.counter)
def startscan(self):
self.scan = True
def stopscan(self):
self.scan = False
#######################################################
@inlineCallbacks
def scanner(self):
if self.scan == True:
el = self.fields[self.counter]
yield self.setmultipole(el)
self.counter = self.counter + 1
print(
str((n**3 - self.counter) * ScanWait / 1000 / 60) +
' minutes left')
if self.counter == len(self.fields):
self.counter = 0
self.scan = False
print('scan done!')
@inlineCallbacks
def setmultipole(self, multipoles):
list1 = [('Ex', multipoles[0]), ('Ey', multipoles[1]),
('Ez', multipoles[2]), ('U3', 10)]
yield self.dacserver.set_multipole_values(list1)
yield self.connect()
@inlineCallbacks
def connect(self):
from labrad.wrappers import connectAsync
from labrad.types import Error
self.cxn = yield connectAsync()
self.dacserver = yield self.cxn.dac_server
self.ionInfo = {}
yield self.setupListeners()
yield self.followSignal(0, 0)
for i in hc.notused_dict: #Sets unused channels to about 0V
yield self.dacserver.set_individual_digital_voltages_u([(i, 32768)
])
@inlineCallbacks
def setupListeners(self):
yield self.dacserver.signal__ports_updated(SIGNALID2)
yield self.dacserver.addListener(listener=self.followSignal,
source=None,
ID=SIGNALID2)
@inlineCallbacks
def followSignal(self, x, s):
av = yield self.dacserver.get_multipole_values()
brightness = 210
darkness = 255 - brightness
for (k, v) in av:
# print k
print v
self.displays[k].display(float(v))
def closeEvent(self, x):
self.reactor.stop()
def makeGUI(self):
self.dacDict = dict(hc.elec_dict.items() + hc.sma_dict.items())
self.controls = {
k: QCustomSpinBox(k, self.dacDict[k].allowedVoltageRange)
for k in self.dacDict.keys()
}
layout = QtGui.QGridLayout()
if bool(hc.sma_dict):
smaBox = QtGui.QGroupBox('SMA Out')
smaLayout = QtGui.QVBoxLayout()
smaBox.setLayout(smaLayout)
elecBox = QtGui.QGroupBox('Electrodes')
elecLayout = QtGui.QGridLayout()
elecBox.setLayout(elecLayout)
if bool(hc.sma_dict):
layout.addWidget(smaBox, 0, 0)
layout.addWidget(elecBox, 0, 1)
for s in hc.sma_dict:
smaLayout.addWidget(self.controls[s],
alignment=QtCore.Qt.AlignRight)
elecList = hc.elec_dict.keys()
elecList.sort()
for i, e in enumerate(
elecList): #i is the number value of the elec, e is the name
if bool(hc.sma_dict):
self.controls[s].setAutoFillBackground(True)
if int(i) == 0:
elecLayout.addWidget(self.controls[e], 1, 4)
if int(i) == 1:
# elecLayout.addWidget(QtGui.QLabel(e),0,6)
elecLayout.addWidget(self.controls[e], 0, 3)
if int(i) == 2:
# elecLayout.addWidget(QtGui.QLabel(e),0,2)
elecLayout.addWidget(self.controls[e], 0, 1)
if int(i) == 3:
# elecLayout.addWidget(QtGui.QLabel(e),2,0)
elecLayout.addWidget(self.controls[e], 1, 0)
if int(i) == 4:
# elecLayout.addWidget(QtGui.QLabel(e),5,0)
elecLayout.addWidget(self.controls[e], 3, 0)
if int(i) == 5:
# elecLayout.addWidget(QtGui.QLabel(e),7,2)
elecLayout.addWidget(self.controls[e], 4, 1)
if int(i) == 6:
# elecLayout.addWidget(QtGui.QLabel(e),7,6)
elecLayout.addWidget(self.controls[e], 4, 3)
if int(i) == 7:
# elecLayout.addWidget(QtGui.QLabel(e),5,8)
elecLayout.addWidget(self.controls[e], 3, 4)
if int(i) == 8:
# elecLayout.addWidget(QtGui.QLabel(e),5,8)
elecLayout.addWidget(self.controls[e], 2, 1)
#elecLayout.addItem(QtGui.QLayoutItem.spacerItem(),1,0,1,8)
elecLayout.setRowMinimumHeight(0, 20)
elecLayout.setRowMinimumHeight(1, 20)
elecLayout.setRowMinimumHeight(2, 10)
elecLayout.setRowMinimumHeight(3, 20)
elecLayout.setRowMinimumHeight(4, 20)
elecLayout.setColumnMinimumWidth(0, 20)
elecLayout.setColumnMinimumWidth(1, 20)
elecLayout.setColumnMinimumWidth(2, 20)
elecLayout.setColumnMinimumWidth(3, 20)
elecLayout.setColumnMinimumWidth(4, 20)
spacer = QtGui.QSpacerItem(20, 40, QtGui.QSizePolicy.Minimum,
QtGui.QSizePolicy.MinimumExpanding)
if bool(hc.sma_dict):
smaLayout.addItem(spacer)
self.inputUpdated = False
self.timer = QtCore.QTimer(self)
self.timer.timeout.connect(self.sendToServer)
self.timer.start(UpdateTime)
for k in self.dacDict.keys():
self.controls[k].onNewValues.connect(self.inputHasUpdated(k))
layout.setColumnStretch(1, 1)
self.setLayout(layout)
