コード例 #1
0
ファイル: processutils.py プロジェクト: duanqi/quantum
def ssh_execute(ssh,
                cmd,
                process_input=None,
                addl_env=None,
                check_exit_code=True):
    LOG.debug(_('Running cmd (SSH): %s'), cmd)
    if addl_env:
        raise InvalidArgumentError(_('Environment not supported over SSH'))

    if process_input:
        # This is (probably) fixable if we need it...
        raise InvalidArgumentError(_('process_input not supported over SSH'))

    stdin_stream, stdout_stream, stderr_stream = ssh.exec_command(cmd)
    channel = stdout_stream.channel

    # NOTE(justinsb): This seems suspicious...
    # ...other SSH clients have buffering issues with this approach
    stdout = stdout_stream.read()
    stderr = stderr_stream.read()
    stdin_stream.close()

    exit_status = channel.recv_exit_status()

    # exit_status == -1 if no exit code was returned
    if exit_status != -1:
        LOG.debug(_('Result was %s') % exit_status)
        if check_exit_code and exit_status != 0:
            raise ProcessExecutionError(exit_code=exit_status,
                                        stdout=stdout,
                                        stderr=stderr,
                                        cmd=cmd)

    return (stdout, stderr)
コード例 #2
0
ファイル: periodic_task.py プロジェクト: Apsu/quantum
    def run_periodic_tasks(self, context, raise_on_error=False):
        """Tasks to be run at a periodic interval."""
        idle_for = DEFAULT_INTERVAL
        for task_name, task in self._periodic_tasks:
            full_task_name = '.'.join([self.__class__.__name__, task_name])

            now = timeutils.utcnow()
            spacing = self._periodic_spacing[task_name]
            last_run = self._periodic_last_run[task_name]

            # If a periodic task is _nearly_ due, then we'll run it early
            if spacing is not None and last_run is not None:
                due = last_run + datetime.timedelta(seconds=spacing)
                if not timeutils.is_soon(due, 0.2):
                    idle_for = min(idle_for, timeutils.delta_seconds(now, due))
                    continue

            if spacing is not None:
                idle_for = min(idle_for, spacing)

            LOG.debug(_("Running periodic task %(full_task_name)s"), locals())
            self._periodic_last_run[task_name] = timeutils.utcnow()

            try:
                task(self, context)
            except Exception as e:
                if raise_on_error:
                    raise
                LOG.exception(_("Error during %(full_task_name)s: %(e)s"),
                              locals())
            time.sleep(0)

        return idle_for
コード例 #3
0
ファイル: impl_qpid.py プロジェクト: zhangheng1442/openstack
    def reconnect(self):
        """Handles reconnecting and re-establishing sessions and queues"""
        if self.connection.opened():
            try:
                self.connection.close()
            except qpid_exceptions.ConnectionError:
                pass

        attempt = 0
        delay = 1
        while True:
            broker = self.brokers[attempt % len(self.brokers)]
            attempt += 1

            try:
                self.connection_create(broker)
                self.connection.open()
            except qpid_exceptions.ConnectionError, e:
                msg_dict = dict(e=e, delay=delay)
                msg = _("Unable to connect to AMQP server: %(e)s. "
                        "Sleeping %(delay)s seconds") % msg_dict
                LOG.error(msg)
                time.sleep(delay)
                delay = min(2 * delay, 60)
            else:
                LOG.info(_('Connected to AMQP server on %s'), broker)
                break
コード例 #4
0
ファイル: policy.py プロジェクト: sunguoqiang/quantum
    def _check(self, match, target_dict, cred_dict):
        try:
            match_kind, match_value = match.split(':', 1)
        except Exception:
            LOG.exception(_("Failed to understand rule %(match)r") % locals())
            # If the rule is invalid, fail closed
            return False

        func = None
        try:
            old_func = getattr(self, '_check_%s' % match_kind)
        except AttributeError:
            func = self._checks.get(match_kind, self._checks.get(None, None))
        else:
            LOG.warning(
                _("Inheritance-based rules are deprecated; update "
                  "_check_%s") % match_kind)
            func = (lambda brain, kind, value, target, cred: old_func(
                value, target, cred))

        if not func:
            LOG.error(_("No handler for matches of kind %s") % match_kind)
            # Fail closed
            return False

        return func(self, match_kind, match_value, target_dict, cred_dict)
コード例 #5
0
ファイル: impl_kombu.py プロジェクト: kumarcv/openstack-nf
 def _error_callback(exc):
     if isinstance(exc, socket.timeout):
         LOG.exception(_("Timed out waiting for RPC response: %s") % str(exc))
         raise rpc_common.Timeout()
     else:
         LOG.exception(_("Failed to consume message from queue: %s") % str(exc))
         info["do_consume"] = True
コード例 #6
0
ファイル: periodic_task.py プロジェクト: soheilhy/quantum
    def run_periodic_tasks(self, context, raise_on_error=False):
        """Tasks to be run at a periodic interval."""
        idle_for = DEFAULT_INTERVAL
        for task_name, task in self._periodic_tasks:
            full_task_name = '.'.join([self.__class__.__name__, task_name])

            now = timeutils.utcnow()
            spacing = self._periodic_spacing[task_name]
            last_run = self._periodic_last_run[task_name]

            # If a periodic task is _nearly_ due, then we'll run it early
            if spacing is not None and last_run is not None:
                due = last_run + datetime.timedelta(seconds=spacing)
                if not timeutils.is_soon(due, 0.2):
                    idle_for = min(idle_for, timeutils.delta_seconds(now, due))
                    continue

            if spacing is not None:
                idle_for = min(idle_for, spacing)

            LOG.debug(_("Running periodic task %(full_task_name)s"), locals())
            self._periodic_last_run[task_name] = timeutils.utcnow()

            try:
                task(self, context)
            except Exception as e:
                if raise_on_error:
                    raise
                LOG.exception(_("Error during %(full_task_name)s: %(e)s"),
                              locals())
            time.sleep(0)

        return idle_for
コード例 #7
0
ファイル: impl_zmq.py プロジェクト: AmirolAhmad/quantum
            def publisher(waiter):
                LOG.info(_("Creating proxy for topic: %s"), topic)

                try:
                    # The topic is received over the network,
                    # don't trust this input.
                    if self.badchars.search(topic) is not None:
                        emsg = _("Topic contained dangerous characters.")
                        LOG.warn(emsg)
                        raise RPCException(emsg)

                    out_sock = ZmqSocket("ipc://%s/zmq_topic_%s" %
                                         (ipc_dir, topic),
                                         sock_type, bind=True)
                except RPCException:
                    waiter.send_exception(*sys.exc_info())
                    return

                self.topic_proxy[topic] = eventlet.queue.LightQueue(
                    CONF.rpc_zmq_topic_backlog)
                self.sockets.append(out_sock)

                # It takes some time for a pub socket to open,
                # before we can have any faith in doing a send() to it.
                if sock_type == zmq.PUB:
                    eventlet.sleep(.5)

                waiter.send(True)

                while(True):
                    data = self.topic_proxy[topic].get()
                    out_sock.send(data)
                    LOG.debug(_("ROUTER RELAY-OUT SUCCEEDED %(data)s") %
                              {'data': data})
コード例 #8
0
ファイル: policy.py プロジェクト: kumarcv/openstack-nf
    def _check(self, match, target_dict, cred_dict):
        try:
            match_kind, match_value = match.split(':', 1)
        except Exception:
            LOG.exception(_("Failed to understand rule %(match)r") % locals())
            # If the rule is invalid, fail closed
            return False

        func = None
        try:
            old_func = getattr(self, '_check_%s' % match_kind)
        except AttributeError:
            func = self._checks.get(match_kind, self._checks.get(None, None))
        else:
            LOG.warning(_("Inheritance-based rules are deprecated; update "
                          "_check_%s") % match_kind)
            func = lambda brain, kind, value, target, cred: old_func(value,
                                                                     target,
                                                                     cred)

        if not func:
            LOG.error(_("No handler for matches of kind %s") % match_kind)
            # Fail closed
            return False

        return func(self, match_kind, match_value, target_dict, cred_dict)
コード例 #9
0
        def _inner():
            if initial_delay:
                greenthread.sleep(initial_delay)

            try:
                while self._running:
                    start = timeutils.utcnow()
                    self.f(*self.args, **self.kw)
                    end = timeutils.utcnow()
                    if not self._running:
                        break
                    delay = interval - timeutils.delta_seconds(start, end)
                    if delay <= 0:
                        LOG.warn(
                            _('task run outlasted interval by %s sec') %
                            -delay)
                    greenthread.sleep(delay if delay > 0 else 0)
            except LoopingCallDone as e:
                self.stop()
                done.send(e.retvalue)
            except Exception:
                LOG.exception(_('in fixed duration looping call'))
                done.send_exception(*sys.exc_info())
                return
            else:
                done.send(True)
コード例 #10
0
    def wait(self):
        """Loop waiting on children to die and respawning as necessary"""

        LOG.debug(_('Full set of CONF:'))
        CONF.log_opt_values(LOG, std_logging.DEBUG)

        while self.running:
            wrap = self._wait_child()
            if not wrap:
                continue

            while self.running and len(wrap.children) < wrap.workers:
                self._start_child(wrap)

        if self.sigcaught:
            signame = {signal.SIGTERM: 'SIGTERM',
                       signal.SIGINT: 'SIGINT'}[self.sigcaught]
            LOG.info(_('Caught %s, stopping children'), signame)

        for pid in self.children:
            try:
                os.kill(pid, signal.SIGTERM)
            except OSError as exc:
                if exc.errno != errno.ESRCH:
                    raise

        # Wait for children to die
        if self.children:
            LOG.info(_('Waiting on %d children to exit'), len(self.children))
            while self.children:
                self._wait_child()
コード例 #11
0
        def _inner():
            if initial_delay:
                greenthread.sleep(initial_delay)

            try:
                while self._running:
                    idle = self.f(*self.args, **self.kw)
                    if not self._running:
                        break

                    if periodic_interval_max is not None:
                        idle = min(idle, periodic_interval_max)
                    LOG.debug(
                        _('Dynamic looping call sleeping for %.02f '
                          'seconds'), idle)
                    greenthread.sleep(idle)
            except LoopingCallDone as e:
                self.stop()
                done.send(e.retvalue)
            except Exception:
                LOG.exception(_('in dynamic looping call'))
                done.send_exception(*sys.exc_info())
                return
            else:
                done.send(True)
コード例 #12
0
    def consume_in_thread(self):
        """Runs the ZmqProxy service."""
        ipc_dir = CONF.rpc_zmq_ipc_dir
        consume_in = "tcp://%s:%s" % \
            (CONF.rpc_zmq_bind_address,
             CONF.rpc_zmq_port)
        consumption_proxy = InternalContext(None)

        try:
            os.makedirs(ipc_dir)
        except os.error:
            if not os.path.isdir(ipc_dir):
                with excutils.save_and_reraise_exception():
                    LOG.error(
                        _("Required IPC directory does not exist at"
                          " %s") % (ipc_dir, ))
        try:
            self.register(consumption_proxy,
                          consume_in,
                          zmq.PULL,
                          out_bind=True)
        except zmq.ZMQError:
            if os.access(ipc_dir, os.X_OK):
                with excutils.save_and_reraise_exception():
                    LOG.error(
                        _("Permission denied to IPC directory at"
                          " %s") % (ipc_dir, ))
            with excutils.save_and_reraise_exception():
                LOG.error(
                    _("Could not create ZeroMQ receiver daemon. "
                      "Socket may already be in use."))

        super(ZmqProxy, self).consume_in_thread()
コード例 #13
0
            def publisher(waiter):
                LOG.info(_("Creating proxy for topic: %s"), topic)

                try:
                    # The topic is received over the network,
                    # don't trust this input.
                    if self.badchars.search(topic) is not None:
                        emsg = _("Topic contained dangerous characters.")
                        LOG.warn(emsg)
                        raise RPCException(emsg)

                    out_sock = ZmqSocket("ipc://%s/zmq_topic_%s" %
                                         (ipc_dir, topic),
                                         sock_type,
                                         bind=True)
                except RPCException:
                    waiter.send_exception(*sys.exc_info())
                    return

                self.topic_proxy[topic] = eventlet.queue.LightQueue(
                    CONF.rpc_zmq_topic_backlog)
                self.sockets.append(out_sock)

                # It takes some time for a pub socket to open,
                # before we can have any faith in doing a send() to it.
                if sock_type == zmq.PUB:
                    eventlet.sleep(.5)

                waiter.send(True)

                while (True):
                    data = self.topic_proxy[topic].get()
                    out_sock.send(data, copy=False)
コード例 #14
0
def _parse_check(rule):
    """
    Parse a single base check rule into an appropriate Check object.
    """

    # Handle the special checks
    if rule == '!':
        return FalseCheck()
    elif rule == '@':
        return TrueCheck()

    try:
        kind, match = rule.split(':', 1)
    except Exception:
        LOG.exception(_("Failed to understand rule %(rule)s") % locals())
        # If the rule is invalid, we'll fail closed
        return FalseCheck()

    # Find what implements the check
    if kind in _checks:
        return _checks[kind](kind, match)
    elif None in _checks:
        return _checks[None](kind, match)
    else:
        LOG.error(_("No handler for matches of kind %s") % kind)
        return FalseCheck()
コード例 #15
0
ファイル: processutils.py プロジェクト: hswayne77/quantum
def ssh_execute(ssh, cmd, process_input=None, addl_env=None, check_exit_code=True):
    LOG.debug(_("Running cmd (SSH): %s"), cmd)
    if addl_env:
        raise InvalidArgumentError(_("Environment not supported over SSH"))

    if process_input:
        # This is (probably) fixable if we need it...
        raise InvalidArgumentError(_("process_input not supported over SSH"))

    stdin_stream, stdout_stream, stderr_stream = ssh.exec_command(cmd)
    channel = stdout_stream.channel

    # NOTE(justinsb): This seems suspicious...
    # ...other SSH clients have buffering issues with this approach
    stdout = stdout_stream.read()
    stderr = stderr_stream.read()
    stdin_stream.close()

    exit_status = channel.recv_exit_status()

    # exit_status == -1 if no exit code was returned
    if exit_status != -1:
        LOG.debug(_("Result was %s") % exit_status)
        if check_exit_code and exit_status != 0:
            raise ProcessExecutionError(exit_code=exit_status, stdout=stdout, stderr=stderr, cmd=cmd)

    return (stdout, stderr)
コード例 #16
0
 def _connect(self, params):
     """Connect to rabbit.  Re-establish any queues that may have
     been declared before if we are reconnecting.  Exceptions should
     be handled by the caller.
     """
     if self.connection:
         LOG.info(
             _("Reconnecting to AMQP server on "
               "%(hostname)s:%(port)d") % params)
         try:
             self.connection.close()
         except self.connection_errors:
             pass
         # Setting this in case the next statement fails, though
         # it shouldn't be doing any network operations, yet.
         self.connection = None
     self.connection = kombu.connection.BrokerConnection(**params)
     self.connection_errors = self.connection.connection_errors
     if self.memory_transport:
         # Kludge to speed up tests.
         self.connection.transport.polling_interval = 0.0
     self.consumer_num = itertools.count(1)
     self.connection.connect()
     self.channel = self.connection.channel()
     # work around 'memory' transport bug in 1.1.3
     if self.memory_transport:
         self.channel._new_queue('ae.undeliver')
     for consumer in self.consumers:
         consumer.reconnect(self.channel)
     LOG.info(
         _('Connected to AMQP server on %(hostname)s:%(port)d') % params)
コード例 #17
0
ファイル: periodic_task.py プロジェクト: kumarcv/openstack-nf
    def run_periodic_tasks(self, context, raise_on_error=False):
        """Tasks to be run at a periodic interval."""
        for task_name, task in self._periodic_tasks:
            full_task_name = '.'.join([self.__class__.__name__, task_name])

            ticks_to_skip = self._ticks_to_skip[task_name]
            if ticks_to_skip > 0:
                LOG.debug(_("Skipping %(full_task_name)s, %(ticks_to_skip)s"
                            " ticks left until next run"),
                          dict(full_task_name=full_task_name,
                               ticks_to_skip=ticks_to_skip))
                self._ticks_to_skip[task_name] -= 1
                continue

            self._ticks_to_skip[task_name] = task._ticks_between_runs
            LOG.debug(_("Running periodic task %(full_task_name)s"),
                      dict(full_task_name=full_task_name))

            try:
                task(self, context)
            except Exception as e:
                if raise_on_error:
                    raise
                LOG.exception(_("Error during %(full_task_name)s:"
                                " %(e)s"),
                              dict(e=e, full_task_name=full_task_name))
コード例 #18
0
def multicall(conf, context, topic, msg, timeout, connection_pool):
    """Make a call that returns multiple times."""
    # TODO(pekowski): Remove all these comments in Havana.
    # For amqp_rpc_single_reply_queue = False,
    # Can't use 'with' for multicall, as it returns an iterator
    # that will continue to use the connection.  When it's done,
    # connection.close() will get called which will put it back into
    # the pool
    # For amqp_rpc_single_reply_queue = True,
    # The 'with' statement is mandatory for closing the connection
    LOG.debug(_('Making synchronous call on %s ...'), topic)
    msg_id = uuid.uuid4().hex
    msg.update({'_msg_id': msg_id})
    LOG.debug(_('MSG_ID is %s') % (msg_id))
    _add_unique_id(msg)
    pack_context(msg, context)

    # TODO(pekowski): Remove this flag and the code under the if clause
    #                 in Havana.
    if not conf.amqp_rpc_single_reply_queue:
        conn = ConnectionContext(conf, connection_pool)
        wait_msg = MulticallWaiter(conf, conn, timeout)
        conn.declare_direct_consumer(msg_id, wait_msg)
        conn.topic_send(topic, rpc_common.serialize_msg(msg), timeout)
    else:
        with _reply_proxy_create_sem:
            if not connection_pool.reply_proxy:
                connection_pool.reply_proxy = ReplyProxy(conf, connection_pool)
        msg.update({'_reply_q': connection_pool.reply_proxy.get_reply_q()})
        wait_msg = MulticallProxyWaiter(conf, msg_id, timeout, connection_pool)
        with ConnectionContext(conf, connection_pool) as conn:
            conn.topic_send(topic, rpc_common.serialize_msg(msg), timeout)
    return wait_msg
コード例 #19
0
ファイル: impl_zmq.py プロジェクト: Frostman/quantum
    def consume(self, sock):
        #TODO(ewindisch): use zero-copy (i.e. references, not copying)
        data = sock.recv()
        LOG.debug(_("CONSUMER RECEIVED DATA: %s"), data)
        if sock in self.mapping:
            LOG.debug(_("ROUTER RELAY-OUT %(data)s") % {
                'data': data})
            self.mapping[sock].send(data)
            return

        proxy = self.proxies[sock]

        if data[2] == 'cast':  # Legacy protocol
            packenv = data[3]

            ctx, msg = _deserialize(packenv)
            request = rpc_common.deserialize_msg(msg)
            ctx = RpcContext.unmarshal(ctx)
        elif data[2] == 'impl_zmq_v2':
            packenv = data[4:]

            msg = unflatten_envelope(packenv)
            request = rpc_common.deserialize_msg(msg)

            # Unmarshal only after verifying the message.
            ctx = RpcContext.unmarshal(data[3])
        else:
            LOG.error(_("ZMQ Envelope version unsupported or unknown."))
            return

        self.pool.spawn_n(self.process, proxy, ctx, request)
コード例 #20
0
ファイル: service.py プロジェクト: soheilhy/quantum
    def _wait_child(self):
        try:
            # Don't block if no child processes have exited
            pid, status = os.waitpid(0, os.WNOHANG)
            if not pid:
                return None
        except OSError as exc:
            if exc.errno not in (errno.EINTR, errno.ECHILD):
                raise
            return None

        if os.WIFSIGNALED(status):
            sig = os.WTERMSIG(status)
            LOG.info(_('Child %(pid)d killed by signal %(sig)d'),
                     dict(pid=pid, sig=sig))
        else:
            code = os.WEXITSTATUS(status)
            LOG.info(_('Child %(pid)s exited with status %(code)d'),
                     dict(pid=pid, code=code))

        if pid not in self.children:
            LOG.warning(_('pid %d not in child list'), pid)
            return None

        wrap = self.children.pop(pid)
        wrap.children.remove(pid)
        return wrap
コード例 #21
0
ファイル: impl_zmq.py プロジェクト: Frostman/quantum
    def create_consumer(self, topic, proxy, fanout=False):
        # Subscription scenarios
        if fanout:
            sock_type = zmq.SUB
            subscribe = ('', fanout)[type(fanout) == str]
            topic = 'fanout~' + topic.split('.', 1)[0]
        else:
            sock_type = zmq.PULL
            subscribe = None
            topic = '.'.join((topic.split('.', 1)[0], CONF.rpc_zmq_host))

        if topic in self.topics:
            LOG.info(_("Skipping topic registration. Already registered."))
            return

        # Receive messages from (local) proxy
        inaddr = "ipc://%s/zmq_topic_%s" % \
            (CONF.rpc_zmq_ipc_dir, topic)

        LOG.debug(_("Consumer is a zmq.%s"),
                  ['PULL', 'SUB'][sock_type == zmq.SUB])

        self.reactor.register(proxy, inaddr, sock_type,
                              subscribe=subscribe, in_bind=False)
        self.topics.append(topic)
コード例 #22
0
ファイル: service.py プロジェクト: whitekid/quantum
    def wait(self):
        """Loop waiting on children to die and respawning as necessary"""

        LOG.debug(_('Full set of CONF:'))
        CONF.log_opt_values(LOG, std_logging.DEBUG)

        while self.running:
            wrap = self._wait_child()
            if not wrap:
                continue

            while self.running and len(wrap.children) < wrap.workers:
                self._start_child(wrap)

        if self.sigcaught:
            signame = {
                signal.SIGTERM: 'SIGTERM',
                signal.SIGINT: 'SIGINT'
            }[self.sigcaught]
            LOG.info(_('Caught %s, stopping children'), signame)

        for pid in self.children:
            try:
                os.kill(pid, signal.SIGTERM)
            except OSError as exc:
                if exc.errno != errno.ESRCH:
                    raise

        # Wait for children to die
        if self.children:
            LOG.info(_('Waiting on %d children to exit'), len(self.children))
            while self.children:
                self._wait_child()
コード例 #23
0
    def run_periodic_tasks(self, context, raise_on_error=False):
        """Tasks to be run at a periodic interval."""
        for task_name, task in self._periodic_tasks:
            full_task_name = '.'.join([self.__class__.__name__, task_name])

            ticks_to_skip = self._ticks_to_skip[task_name]
            if ticks_to_skip > 0:
                LOG.debug(
                    _("Skipping %(full_task_name)s, %(ticks_to_skip)s"
                      " ticks left until next run"),
                    dict(full_task_name=full_task_name,
                         ticks_to_skip=ticks_to_skip))
                self._ticks_to_skip[task_name] -= 1
                continue

            self._ticks_to_skip[task_name] = task._ticks_between_runs
            LOG.debug(_("Running periodic task %(full_task_name)s"),
                      dict(full_task_name=full_task_name))

            try:
                task(self, context)
            except Exception as e:
                if raise_on_error:
                    raise
                LOG.exception(_("Error during %(full_task_name)s:"
                                " %(e)s"),
                              dict(e=e, full_task_name=full_task_name))
コード例 #24
0
ファイル: impl_zmq.py プロジェクト: duanqi/quantum
def _multi_send(method,
                context,
                topic,
                msg,
                timeout=None,
                envelope=False,
                _msg_id=None):
    """
    Wraps the sending of messages,
    dispatches to the matchmaker and sends
    message to all relevant hosts.
    """
    conf = CONF
    LOG.debug(_("%(msg)s") % {'msg': ' '.join(map(pformat, (topic, msg)))})

    queues = _get_matchmaker().queues(topic)
    LOG.debug(_("Sending message(s) to: %s"), queues)

    # Don't stack if we have no matchmaker results
    if not queues:
        LOG.warn(_("No matchmaker results. Not casting."))
        # While not strictly a timeout, callers know how to handle
        # this exception and a timeout isn't too big a lie.
        raise rpc_common.Timeout(_("No match from matchmaker."))

    # This supports brokerless fanout (addresses > 1)
    for queue in queues:
        (_topic, ip_addr) = queue
        _addr = "tcp://%s:%s" % (ip_addr, conf.rpc_zmq_port)

        if method.__name__ == '_cast':
            eventlet.spawn_n(method, _addr, context, _topic, msg, timeout,
                             envelope, _msg_id)
            return
        return method(_addr, context, _topic, msg, timeout, envelope)
コード例 #25
0
ファイル: impl_zmq.py プロジェクト: ntoll/quantum
    def __init__(self, addr, zmq_type, bind=True, subscribe=None):
        self.sock = _get_ctxt().socket(zmq_type)
        self.addr = addr
        self.type = zmq_type
        self.subscriptions = []

        # Support failures on sending/receiving on wrong socket type.
        self.can_recv = zmq_type in (zmq.PULL, zmq.SUB)
        self.can_send = zmq_type in (zmq.PUSH, zmq.PUB)
        self.can_sub = zmq_type in (zmq.SUB, )

        # Support list, str, & None for subscribe arg (cast to list)
        do_sub = {
            list: subscribe,
            str: [subscribe],
            type(None): []
        }[type(subscribe)]

        for f in do_sub:
            self.subscribe(f)

        str_data = {'addr': addr, 'type': self.socket_s(),
                    'subscribe': subscribe, 'bind': bind}

        LOG.debug(_("Connecting to %(addr)s with %(type)s"), str_data)
        LOG.debug(_("-> Subscribed to %(subscribe)s"), str_data)
        LOG.debug(_("-> bind: %(bind)s"), str_data)

        try:
            if bind:
                self.sock.bind(addr)
            else:
                self.sock.connect(addr)
        except Exception:
            raise RPCException(_("Could not open socket."))
コード例 #26
0
ファイル: lockutils.py プロジェクト: alexpilotti/quantum
        def inner(*args, **kwargs):
            # NOTE(soren): If we ever go natively threaded, this will be racy.
            #              See http://stackoverflow.com/questions/5390569/dyn
            #              amically-allocating-and-destroying-mutexes
            sem = _semaphores.get(name, semaphore.Semaphore())
            if name not in _semaphores:
                # this check is not racy - we're already holding ref locally
                # so GC won't remove the item and there was no IO switch
                # (only valid in greenthreads)
                _semaphores[name] = sem

            with sem:
                LOG.debug(_('Got semaphore "%(lock)s" for method '
                            '"%(method)s"...'), {'lock': name,
                                                 'method': f.__name__})
                if external and not CONF.disable_process_locking:
                    LOG.debug(_('Attempting to grab file lock "%(lock)s" for '
                                'method "%(method)s"...'),
                              {'lock': name, 'method': f.__name__})
                    cleanup_dir = False

                    # We need a copy of lock_path because it is non-local
                    local_lock_path = lock_path
                    if not local_lock_path:
                        local_lock_path = CONF.lock_path

                    if not local_lock_path:
                        cleanup_dir = True
                        local_lock_path = tempfile.mkdtemp()

                    if not os.path.exists(local_lock_path):
                        cleanup_dir = True
                        fileutils.ensure_tree(local_lock_path)

                    # NOTE(mikal): the lock name cannot contain directory
                    # separators
                    safe_name = name.replace(os.sep, '_')
                    lock_file_name = '%s%s' % (lock_file_prefix, safe_name)
                    lock_file_path = os.path.join(local_lock_path,
                                                  lock_file_name)

                    try:
                        lock = InterProcessLock(lock_file_path)
                        with lock:
                            LOG.debug(_('Got file lock "%(lock)s" at %(path)s '
                                        'for method "%(method)s"...'),
                                      {'lock': name,
                                       'path': lock_file_path,
                                       'method': f.__name__})
                            retval = f(*args, **kwargs)
                    finally:
                        # NOTE(vish): This removes the tempdir if we needed
                        #             to create one. This is used to cleanup
                        #             the locks left behind by unit tests.
                        if cleanup_dir:
                            shutil.rmtree(local_lock_path)
                else:
                    retval = f(*args, **kwargs)

            return retval
コード例 #27
0
    def __call__(self, message_data):
        """Consumer callback to call a method on a proxy object.

        Parses the message for validity and fires off a thread to call the
        proxy object method.

        Message data should be a dictionary with two keys:
            method: string representing the method to call
            args: dictionary of arg: value

        Example: {'method': 'echo', 'args': {'value': 42}}

        """
        # It is important to clear the context here, because at this point
        # the previous context is stored in local.store.context
        if hasattr(local.store, 'context'):
            del local.store.context
        rpc_common._safe_log(LOG.debug, _('received %s'), message_data)
        self.msg_id_cache.check_duplicate_message(message_data)
        ctxt = unpack_context(self.conf, message_data)
        method = message_data.get('method')
        args = message_data.get('args', {})
        version = message_data.get('version')
        namespace = message_data.get('namespace')
        if not method:
            LOG.warn(_('no method for message: %s') % message_data)
            ctxt.reply(_('No method for message: %s') % message_data,
                       connection_pool=self.connection_pool)
            return
        self.pool.spawn_n(self._process_data, ctxt, version, method,
                          namespace, args)
コード例 #28
0
ファイル: impl_zmq.py プロジェクト: duanqi/quantum
    def consume_in_thread(self):
        """Runs the ZmqProxy service"""
        ipc_dir = CONF.rpc_zmq_ipc_dir
        consume_in = "tcp://%s:%s" % \
            (CONF.rpc_zmq_bind_address,
             CONF.rpc_zmq_port)
        consumption_proxy = InternalContext(None)

        if not os.path.isdir(ipc_dir):
            try:
                utils.execute('mkdir', '-p', ipc_dir, run_as_root=True)
                utils.execute('chown',
                              "%s:%s" % (os.getuid(), os.getgid()),
                              ipc_dir,
                              run_as_root=True)
                utils.execute('chmod', '750', ipc_dir, run_as_root=True)
            except utils.ProcessExecutionError:
                with excutils.save_and_reraise_exception():
                    LOG.error(
                        _("Could not create IPC directory %s") % (ipc_dir, ))

        try:
            self.register(consumption_proxy,
                          consume_in,
                          zmq.PULL,
                          out_bind=True)
        except zmq.ZMQError:
            with excutils.save_and_reraise_exception():
                LOG.error(
                    _("Could not create ZeroMQ receiver daemon. "
                      "Socket may already be in use."))

        super(ZmqProxy, self).consume_in_thread()
コード例 #29
0
ファイル: impl_zmq.py プロジェクト: duanqi/quantum
    def create_consumer(self, topic, proxy, fanout=False):
        # Register with matchmaker.
        _get_matchmaker().register(topic, CONF.rpc_zmq_host)

        # Subscription scenarios
        if fanout:
            sock_type = zmq.SUB
            subscribe = ('', fanout)[type(fanout) == str]
            topic = 'fanout~' + topic.split('.', 1)[0]
        else:
            sock_type = zmq.PULL
            subscribe = None
            topic = '.'.join((topic.split('.', 1)[0], CONF.rpc_zmq_host))

        if topic in self.topics:
            LOG.info(_("Skipping topic registration. Already registered."))
            return

        # Receive messages from (local) proxy
        inaddr = "ipc://%s/zmq_topic_%s" % \
            (CONF.rpc_zmq_ipc_dir, topic)

        LOG.debug(_("Consumer is a zmq.%s"), ['PULL',
                                              'SUB'][sock_type == zmq.SUB])

        self.reactor.register(proxy,
                              inaddr,
                              sock_type,
                              subscribe=subscribe,
                              in_bind=False)
        self.topics.append(topic)
コード例 #30
0
ファイル: impl_zmq.py プロジェクト: ntoll/quantum
    def consume_in_thread(self):
        """Runs the ZmqProxy service"""
        ipc_dir = CONF.rpc_zmq_ipc_dir
        consume_in = "tcp://%s:%s" % \
            (CONF.rpc_zmq_bind_address,
             CONF.rpc_zmq_port)
        consumption_proxy = InternalContext(None)

        if not os.path.isdir(ipc_dir):
            try:
                utils.execute('mkdir', '-p', ipc_dir, run_as_root=True)
                utils.execute('chown', "%s:%s" % (os.getuid(), os.getgid()),
                              ipc_dir, run_as_root=True)
                utils.execute('chmod', '750', ipc_dir, run_as_root=True)
            except utils.ProcessExecutionError:
                LOG.error(_("Could not create IPC directory %s") %
                          (ipc_dir, ))
                raise

        try:
            self.register(consumption_proxy,
                          consume_in,
                          zmq.PULL,
                          out_bind=True)
        except zmq.ZMQError:
            LOG.error(_("Could not create ZeroMQ receiver daemon. "
                        "Socket may already be in use."))
            raise

        super(ZmqProxy, self).consume_in_thread()
コード例 #31
0
ファイル: impl_zmq.py プロジェクト: ntoll/quantum
def _multi_send(method, context, topic, msg, timeout=None, serialize=True,
                force_envelope=False):
    """
    Wraps the sending of messages,
    dispatches to the matchmaker and sends
    message to all relevant hosts.
    """
    conf = CONF
    LOG.debug(_("%(msg)s") % {'msg': ' '.join(map(pformat, (topic, msg)))})

    queues = _get_matchmaker().queues(topic)
    LOG.debug(_("Sending message(s) to: %s"), queues)

    # Don't stack if we have no matchmaker results
    if len(queues) == 0:
        LOG.warn(_("No matchmaker results. Not casting."))
        # While not strictly a timeout, callers know how to handle
        # this exception and a timeout isn't too big a lie.
        raise rpc_common.Timeout, "No match from matchmaker."

    # This supports brokerless fanout (addresses > 1)
    for queue in queues:
        (_topic, ip_addr) = queue
        _addr = "tcp://%s:%s" % (ip_addr, conf.rpc_zmq_port)

        if method.__name__ == '_cast':
            eventlet.spawn_n(method, _addr, context,
                             _topic, _topic, msg, timeout, serialize,
                             force_envelope)
            return
        return method(_addr, context, _topic, _topic, msg, timeout,
                      serialize, force_envelope)
コード例 #32
0
ファイル: impl_zmq.py プロジェクト: whitekid/quantum
    def create_consumer(self, topic, proxy, fanout=False):
        # Only consume on the base topic name.
        topic = topic.split('.', 1)[0]

        LOG.info(_("Create Consumer for topic (%(topic)s)") %
                 {'topic': topic})

        # Subscription scenarios
        if fanout:
            subscribe = ('', fanout)[type(fanout) == str]
            sock_type = zmq.SUB
            topic = 'fanout~' + topic
        else:
            sock_type = zmq.PULL
            subscribe = None

        # Receive messages from (local) proxy
        inaddr = "ipc://%s/zmq_topic_%s" % \
            (CONF.rpc_zmq_ipc_dir, topic)

        LOG.debug(_("Consumer is a zmq.%s"),
                  ['PULL', 'SUB'][sock_type == zmq.SUB])

        self.reactor.register(proxy, inaddr, sock_type,
                              subscribe=subscribe, in_bind=False)
コード例 #33
0
ファイル: impl_zmq.py プロジェクト: whitekid/quantum
def register_opts(conf):
    """Registration of options for this driver."""
    #NOTE(ewindisch): ZMQ_CTX and matchmaker
    # are initialized here as this is as good
    # an initialization method as any.

    # We memoize through these globals
    global ZMQ_CTX
    global matchmaker
    global CONF

    if not CONF:
        conf.register_opts(zmq_opts)
        CONF = conf
    # Don't re-set, if this method is called twice.
    if not ZMQ_CTX:
        ZMQ_CTX = zmq.Context(conf.rpc_zmq_contexts)
    if not matchmaker:
        # rpc_zmq_matchmaker should be set to a 'module.Class'
        mm_path = conf.rpc_zmq_matchmaker.split('.')
        mm_module = '.'.join(mm_path[:-1])
        mm_class = mm_path[-1]

        # Only initialize a class.
        if mm_path[-1][0] not in string.ascii_uppercase:
            LOG.error(_("Matchmaker could not be loaded.\n"
                      "rpc_zmq_matchmaker is not a class."))
            raise RPCException(_("Error loading Matchmaker."))

        mm_impl = importutils.import_module(mm_module)
        mm_constructor = getattr(mm_impl, mm_class)
        matchmaker = mm_constructor()
コード例 #34
0
ファイル: impl_zmq.py プロジェクト: whitekid/quantum
    def __init__(self, addr, zmq_type, bind=True, subscribe=None):
        self.sock = ZMQ_CTX.socket(zmq_type)
        self.addr = addr
        self.type = zmq_type
        self.subscriptions = []

        # Support failures on sending/receiving on wrong socket type.
        self.can_recv = zmq_type in (zmq.PULL, zmq.SUB)
        self.can_send = zmq_type in (zmq.PUSH, zmq.PUB)
        self.can_sub = zmq_type in (zmq.SUB, )

        # Support list, str, & None for subscribe arg (cast to list)
        do_sub = {
            list: subscribe,
            str: [subscribe],
            type(None): []
        }[type(subscribe)]

        for f in do_sub:
            self.subscribe(f)

        str_data = {'addr': addr, 'type': self.socket_s(),
                    'subscribe': subscribe, 'bind': bind}

        LOG.debug(_("Connecting to %(addr)s with %(type)s"), str_data)
        LOG.debug(_("-> Subscribed to %(subscribe)s"), str_data)
        LOG.debug(_("-> bind: %(bind)s"), str_data)

        try:
            if bind:
                self.sock.bind(addr)
            else:
                self.sock.connect(addr)
        except Exception:
            raise RPCException(_("Could not open socket."))
コード例 #35
0
ファイル: impl_zmq.py プロジェクト: whitekid/quantum
    def register(self, proxy, in_addr, zmq_type_in, out_addr=None,
                 zmq_type_out=None, in_bind=True, out_bind=True,
                 subscribe=None):

        LOG.info(_("Registering reactor"))

        if zmq_type_in not in (zmq.PULL, zmq.SUB):
            raise RPCException("Bad input socktype")

        # Items push in.
        inq = ZmqSocket(in_addr, zmq_type_in, bind=in_bind,
                        subscribe=subscribe)

        self.proxies[inq] = proxy
        self.sockets.append(inq)

        LOG.info(_("In reactor registered"))

        if not out_addr:
            return

        if zmq_type_out not in (zmq.PUSH, zmq.PUB):
            raise RPCException("Bad output socktype")

        # Items push out.
        outq = ZmqSocket(out_addr, zmq_type_out, bind=out_bind)

        self.mapping[inq] = outq
        self.mapping[outq] = inq
        self.sockets.append(outq)

        LOG.info(_("Out reactor registered"))
コード例 #36
0
ファイル: impl_zmq.py プロジェクト: DestinyOneSystems/quantum
    def consume_in_thread(self):
        """Runs the ZmqProxy service."""
        ipc_dir = CONF.rpc_zmq_ipc_dir
        consume_in = "tcp://%s:%s" % \
            (CONF.rpc_zmq_bind_address,
             CONF.rpc_zmq_port)
        consumption_proxy = InternalContext(None)

        try:
            os.makedirs(ipc_dir)
        except os.error:
            if not os.path.isdir(ipc_dir):
                with excutils.save_and_reraise_exception():
                    LOG.error(_("Required IPC directory does not exist at"
                                " %s") % (ipc_dir, ))
        try:
            self.register(consumption_proxy,
                          consume_in,
                          zmq.PULL,
                          out_bind=True)
        except zmq.ZMQError:
            if os.access(ipc_dir, os.X_OK):
                with excutils.save_and_reraise_exception():
                    LOG.error(_("Permission denied to IPC directory at"
                                " %s") % (ipc_dir, ))
            with excutils.save_and_reraise_exception():
                LOG.error(_("Could not create ZeroMQ receiver daemon. "
                            "Socket may already be in use."))

        super(ZmqProxy, self).consume_in_thread()
コード例 #37
0
ファイル: service.py プロジェクト: AmirolAhmad/quantum
    def _wait_child(self):
        try:
            # Don't block if no child processes have exited
            pid, status = os.waitpid(0, os.WNOHANG)
            if not pid:
                return None
        except OSError as exc:
            if exc.errno not in (errno.EINTR, errno.ECHILD):
                raise
            return None

        if os.WIFSIGNALED(status):
            sig = os.WTERMSIG(status)
            LOG.info(_('Child %(pid)d killed by signal %(sig)d'),
                     dict(pid=pid, sig=sig))
        else:
            code = os.WEXITSTATUS(status)
            LOG.info(_('Child %(pid)s exited with status %(code)d'),
                     dict(pid=pid, code=code))

        if pid not in self.children:
            LOG.warning(_('pid %d not in child list'), pid)
            return None

        wrap = self.children.pop(pid)
        wrap.children.remove(pid)
        return wrap
コード例 #38
0
ファイル: policy.py プロジェクト: habuka036/quantum
def _parse_check(rule):
    """
    Parse a single base check rule into an appropriate Check object.
    """

    # Handle the special checks
    if rule == "!":
        return FalseCheck()
    elif rule == "@":
        return TrueCheck()

    try:
        kind, match = rule.split(":", 1)
    except Exception:
        LOG.exception(_("Failed to understand rule %(rule)s") % locals())
        # If the rule is invalid, we'll fail closed
        return FalseCheck()

    # Find what implements the check
    if kind in _checks:
        return _checks[kind](kind, match)
    elif None in _checks:
        return _checks[None](kind, match)
    else:
        LOG.error(_("No handler for matches of kind %s") % kind)
        return FalseCheck()
コード例 #39
0
ファイル: impl_zmq.py プロジェクト: ntoll/quantum
    def register(self, proxy, in_addr, zmq_type_in, out_addr=None,
                 zmq_type_out=None, in_bind=True, out_bind=True,
                 subscribe=None):

        LOG.info(_("Registering reactor"))

        if zmq_type_in not in (zmq.PULL, zmq.SUB):
            raise RPCException("Bad input socktype")

        # Items push in.
        inq = ZmqSocket(in_addr, zmq_type_in, bind=in_bind,
                        subscribe=subscribe)

        self.proxies[inq] = proxy
        self.sockets.append(inq)

        LOG.info(_("In reactor registered"))

        if not out_addr:
            return

        if zmq_type_out not in (zmq.PUSH, zmq.PUB):
            raise RPCException("Bad output socktype")

        # Items push out.
        outq = ZmqSocket(out_addr, zmq_type_out, bind=out_bind)

        self.mapping[inq] = outq
        self.mapping[outq] = inq
        self.sockets.append(outq)

        LOG.info(_("Out reactor registered"))
コード例 #40
0
ファイル: impl_kombu.py プロジェクト: Frostman/quantum
 def _connect(self, params):
     """Connect to rabbit.  Re-establish any queues that may have
     been declared before if we are reconnecting.  Exceptions should
     be handled by the caller.
     """
     if self.connection:
         LOG.info(_("Reconnecting to AMQP server on "
                  "%(hostname)s:%(port)d") % params)
         try:
             self.connection.release()
         except self.connection_errors:
             pass
         # Setting this in case the next statement fails, though
         # it shouldn't be doing any network operations, yet.
         self.connection = None
     self.connection = kombu.connection.BrokerConnection(**params)
     self.connection_errors = self.connection.connection_errors
     if self.memory_transport:
         # Kludge to speed up tests.
         self.connection.transport.polling_interval = 0.0
     self.consumer_num = itertools.count(1)
     self.connection.connect()
     self.channel = self.connection.channel()
     # work around 'memory' transport bug in 1.1.3
     if self.memory_transport:
         self.channel._new_queue('ae.undeliver')
     for consumer in self.consumers:
         consumer.reconnect(self.channel)
     LOG.info(_('Connected to AMQP server on %(hostname)s:%(port)d') %
              params)
コード例 #41
0
ファイル: impl_zmq.py プロジェクト: ntoll/quantum
            def publisher(waiter):
                LOG.info(_("Creating proxy for topic: %s"), topic)

                try:
                    out_sock = ZmqSocket("ipc://%s/zmq_topic_%s" %
                                         (ipc_dir, topic),
                                         sock_type, bind=True)
                except RPCException:
                    waiter.send_exception(*sys.exc_info())
                    return

                self.topic_proxy[topic] = eventlet.queue.LightQueue(
                    CONF.rpc_zmq_topic_backlog)
                self.sockets.append(out_sock)

                # It takes some time for a pub socket to open,
                # before we can have any faith in doing a send() to it.
                if sock_type == zmq.PUB:
                    eventlet.sleep(.5)

                waiter.send(True)

                while(True):
                    data = self.topic_proxy[topic].get()
                    out_sock.send(data)
                    LOG.debug(_("ROUTER RELAY-OUT SUCCEEDED %(data)s") %
                              {'data': data})
コード例 #42
0
    def _process_data(self, ctxt, version, method, namespace, args):
        """Process a message in a new thread.

        If the proxy object we have has a dispatch method
        (see rpc.dispatcher.RpcDispatcher), pass it the version,
        method, and args and let it dispatch as appropriate.  If not, use
        the old behavior of magically calling the specified method on the
        proxy we have here.
        """
        ctxt.update_store()
        try:
            rval = self.proxy.dispatch(ctxt, version, method, namespace,
                                       **args)
            # Check if the result was a generator
            if inspect.isgenerator(rval):
                for x in rval:
                    ctxt.reply(x, None, connection_pool=self.connection_pool)
            else:
                ctxt.reply(rval, None, connection_pool=self.connection_pool)
            # This final None tells multicall that it is done.
            ctxt.reply(ending=True, connection_pool=self.connection_pool)
        except rpc_common.ClientException as e:
            LOG.debug(_('Expected exception during message handling (%s)') %
                      e._exc_info[1])
            ctxt.reply(None, e._exc_info,
                       connection_pool=self.connection_pool,
                       log_failure=False)
        except Exception:
            # sys.exc_info() is deleted by LOG.exception().
            exc_info = sys.exc_info()
            LOG.error(_('Exception during message handling'),
                      exc_info=exc_info)
            ctxt.reply(None, exc_info, connection_pool=self.connection_pool)
コード例 #43
0
ファイル: impl_zmq.py プロジェクト: ntoll/quantum
    def create_consumer(self, topic, proxy, fanout=False):
        # Only consume on the base topic name.
        topic = topic.split('.', 1)[0]

        LOG.info(_("Create Consumer for topic (%(topic)s)") %
                 {'topic': topic})

        # Subscription scenarios
        if fanout:
            subscribe = ('', fanout)[type(fanout) == str]
            sock_type = zmq.SUB
            topic = 'fanout~' + topic
        else:
            sock_type = zmq.PULL
            subscribe = None

        # Receive messages from (local) proxy
        inaddr = "ipc://%s/zmq_topic_%s" % \
            (CONF.rpc_zmq_ipc_dir, topic)

        LOG.debug(_("Consumer is a zmq.%s"),
                  ['PULL', 'SUB'][sock_type == zmq.SUB])

        self.reactor.register(proxy, inaddr, sock_type,
                              subscribe=subscribe, in_bind=False)
コード例 #44
0
ファイル: impl_zmq.py プロジェクト: alexpilotti/quantum
def register_opts(conf):
    """Registration of options for this driver."""
    #NOTE(ewindisch): ZMQ_CTX and matchmaker
    # are initialized here as this is as good
    # an initialization method as any.

    # We memoize through these globals
    global ZMQ_CTX
    global matchmaker
    global CONF

    if not CONF:
        conf.register_opts(zmq_opts)
        CONF = conf
    # Don't re-set, if this method is called twice.
    if not ZMQ_CTX:
        ZMQ_CTX = zmq.Context(conf.rpc_zmq_contexts)
    if not matchmaker:
        # rpc_zmq_matchmaker should be set to a 'module.Class'
        mm_path = conf.rpc_zmq_matchmaker.split('.')
        mm_module = '.'.join(mm_path[:-1])
        mm_class = mm_path[-1]

        # Only initialize a class.
        if mm_path[-1][0] not in string.ascii_uppercase:
            LOG.error(_("Matchmaker could not be loaded.\n"
                      "rpc_zmq_matchmaker is not a class."))
            raise RPCException(_("Error loading Matchmaker."))

        mm_impl = importutils.import_module(mm_module)
        mm_constructor = getattr(mm_impl, mm_class)
        matchmaker = mm_constructor()
コード例 #45
0
ファイル: impl_zmq.py プロジェクト: duanqi/quantum
    def _get_response(self, ctx, proxy, topic, data):
        """Process a curried message and cast the result to topic."""
        LOG.debug(_("Running func with context: %s"), ctx.to_dict())
        data.setdefault('version', None)
        data.setdefault('args', {})

        try:
            result = proxy.dispatch(ctx, data['version'], data['method'],
                                    data.get('namespace'), **data['args'])
            return ConsumerBase.normalize_reply(result, ctx.replies)
        except greenlet.GreenletExit:
            # ignore these since they are just from shutdowns
            pass
        except rpc_common.ClientException as e:
            LOG.debug(
                _("Expected exception during message handling (%s)") %
                e._exc_info[1])
            return {
                'exc':
                rpc_common.serialize_remote_exception(e._exc_info,
                                                      log_failure=False)
            }
        except Exception:
            LOG.error(_("Exception during message handling"))
            return {
                'exc': rpc_common.serialize_remote_exception(sys.exc_info())
            }
コード例 #46
0
ファイル: impl_qpid.py プロジェクト: Frostman/quantum
    def reconnect(self):
        """Handles reconnecting and re-establishing sessions and queues"""
        if self.connection.opened():
            try:
                self.connection.close()
            except qpid_exceptions.ConnectionError:
                pass

        attempt = 0
        delay = 1
        while True:
            broker = self.brokers[attempt % len(self.brokers)]
            attempt += 1

            try:
                self.connection_create(broker)
                self.connection.open()
            except qpid_exceptions.ConnectionError, e:
                msg_dict = dict(e=e, delay=delay)
                msg = _("Unable to connect to AMQP server: %(e)s. "
                        "Sleeping %(delay)s seconds") % msg_dict
                LOG.error(msg)
                time.sleep(delay)
                delay = min(2 * delay, 60)
            else:
                LOG.info(_('Connected to AMQP server on %s'), broker)
                break
コード例 #47
0
ファイル: impl_zmq.py プロジェクト: duanqi/quantum
    def consume(self, sock):
        #TODO(ewindisch): use zero-copy (i.e. references, not copying)
        data = sock.recv()
        LOG.debug(_("CONSUMER RECEIVED DATA: %s"), data)
        if sock in self.mapping:
            LOG.debug(_("ROUTER RELAY-OUT %(data)s") % {'data': data})
            self.mapping[sock].send(data)
            return

        proxy = self.proxies[sock]

        if data[2] == 'cast':  # Legacy protocol
            packenv = data[3]

            ctx, msg = _deserialize(packenv)
            request = rpc_common.deserialize_msg(msg)
            ctx = RpcContext.unmarshal(ctx)
        elif data[2] == 'impl_zmq_v2':
            packenv = data[4:]

            msg = unflatten_envelope(packenv)
            request = rpc_common.deserialize_msg(msg)

            # Unmarshal only after verifying the message.
            ctx = RpcContext.unmarshal(data[3])
        else:
            LOG.error(_("ZMQ Envelope version unsupported or unknown."))
            return

        self.pool.spawn_n(self.process, proxy, ctx, request)
コード例 #48
0
ファイル: service.py プロジェクト: AmirolAhmad/quantum
    def wait(self):
        """Loop waiting on children to die and respawning as necessary"""

        LOG.debug(_('Full set of CONF:'))
        CONF.log_opt_values(LOG, std_logging.DEBUG)

        while self.running:
            wrap = self._wait_child()
            if not wrap:
                # Yield to other threads if no children have exited
                # Sleep for a short time to avoid excessive CPU usage
                # (see bug #1095346)
                eventlet.greenthread.sleep(.01)
                continue

            while self.running and len(wrap.children) < wrap.workers:
                self._start_child(wrap)

        if self.sigcaught:
            signame = {signal.SIGTERM: 'SIGTERM',
                       signal.SIGINT: 'SIGINT'}[self.sigcaught]
            LOG.info(_('Caught %s, stopping children'), signame)

        for pid in self.children:
            try:
                os.kill(pid, signal.SIGTERM)
            except OSError as exc:
                if exc.errno != errno.ESRCH:
                    raise

        # Wait for children to die
        if self.children:
            LOG.info(_('Waiting on %d children to exit'), len(self.children))
            while self.children:
                self._wait_child()
コード例 #49
0
ファイル: impl_qpid.py プロジェクト: Frostman/quantum
 def _error_callback(exc):
     if isinstance(exc, qpid_exceptions.Empty):
         LOG.exception(_('Timed out waiting for RPC response: %s') %
                       str(exc))
         raise rpc_common.Timeout()
     else:
         LOG.exception(_('Failed to consume message from queue: %s') %
                       str(exc))
コード例 #50
0
ファイル: impl_qpid.py プロジェクト: zhangheng1442/openstack
 def _error_callback(exc):
     if isinstance(exc, qpid_exceptions.Empty):
         LOG.debug(_('Timed out waiting for RPC response: %s') %
                   str(exc))
         raise rpc_common.Timeout()
     else:
         LOG.exception(_('Failed to consume message from queue: %s') %
                       str(exc))
コード例 #51
0
 def _error_callback(exc):
     if isinstance(exc, socket.timeout):
         LOG.exception(
             _('Timed out waiting for RPC response: %s') % str(exc))
         raise rpc_common.Timeout()
     else:
         LOG.exception(
             _('Failed to consume message from queue: %s') % str(exc))
         info['do_consume'] = True
コード例 #52
0
    def reconnect(self):
        """Handles reconnecting and re-establishing queues.
        Will retry up to self.max_retries number of times.
        self.max_retries = 0 means to retry forever.
        Sleep between tries, starting at self.interval_start
        seconds, backing off self.interval_stepping number of seconds
        each attempt.
        """

        attempt = 0
        while True:
            params = self.params_list[attempt % len(self.params_list)]
            attempt += 1
            try:
                self._connect(params)
                return
            except (IOError, self.connection_errors) as e:
                pass
            except Exception, e:
                # NOTE(comstud): Unfortunately it's possible for amqplib
                # to return an error not covered by its transport
                # connection_errors in the case of a timeout waiting for
                # a protocol response.  (See paste link in LP888621)
                # So, we check all exceptions for 'timeout' in them
                # and try to reconnect in this case.
                if 'timeout' not in str(e):
                    raise

            log_info = {}
            log_info['err_str'] = str(e)
            log_info['max_retries'] = self.max_retries
            log_info.update(params)

            if self.max_retries and attempt == self.max_retries:
                LOG.error(
                    _('Unable to connect to AMQP server on '
                      '%(hostname)s:%(port)d after %(max_retries)d '
                      'tries: %(err_str)s') % log_info)
                # NOTE(comstud): Copied from original code.  There's
                # really no better recourse because if this was a queue we
                # need to consume on, we have no way to consume anymore.
                sys.exit(1)

            if attempt == 1:
                sleep_time = self.interval_start or 1
            elif attempt > 1:
                sleep_time += self.interval_stepping
            if self.interval_max:
                sleep_time = min(sleep_time, self.interval_max)

            log_info['sleep_time'] = sleep_time
            LOG.error(
                _('AMQP server on %(hostname)s:%(port)d is '
                  'unreachable: %(err_str)s. Trying again in '
                  '%(sleep_time)d seconds.') % log_info)
            time.sleep(sleep_time)
コード例 #53
0
ファイル: amqp.py プロジェクト: DestinyOneSystems/quantum
 def _process_data(self, message_data):
     msg_id = message_data.pop('_msg_id', None)
     waiter = self._call_waiters.get(msg_id)
     if not waiter:
         LOG.warn(_('No calling threads waiting for msg_id : %(msg_id)s'
                    ', message : %(data)s'), {'msg_id': msg_id,
                                              'data': message_data})
         LOG.warn(_('_call_waiters: %s') % str(self._call_waiters))
     else:
         waiter.put(message_data)
コード例 #54
0
ファイル: api.py プロジェクト: alexpilotti/quantum
def notify(context, publisher_id, event_type, priority, payload):
    """Sends a notification using the specified driver

    :param publisher_id: the source worker_type.host of the message
    :param event_type:   the literal type of event (ex. Instance Creation)
    :param priority:     patterned after the enumeration of Python logging
                         levels in the set (DEBUG, WARN, INFO, ERROR, CRITICAL)
    :param payload:       A python dictionary of attributes

    Outgoing message format includes the above parameters, and appends the
    following:

    message_id
      a UUID representing the id for this notification

    timestamp
      the GMT timestamp the notification was sent at

    The composite message will be constructed as a dictionary of the above
    attributes, which will then be sent via the transport mechanism defined
    by the driver.

    Message example::

        {'message_id': str(uuid.uuid4()),
         'publisher_id': 'compute.host1',
         'timestamp': timeutils.utcnow(),
         'priority': 'WARN',
         'event_type': 'compute.create_instance',
         'payload': {'instance_id': 12, ... }}

    """
    if priority not in log_levels:
        raise BadPriorityException(_("%s not in valid priorities") % priority)

    # Ensure everything is JSON serializable.
    payload = jsonutils.to_primitive(payload, convert_instances=True)

    msg = dict(
        message_id=str(uuid.uuid4()),
        publisher_id=publisher_id,
        event_type=event_type,
        priority=priority,
        payload=payload,
        timestamp=str(timeutils.utcnow()),
    )

    for driver in _get_drivers():
        try:
            driver.notify(context, msg)
        except Exception as e:
            LOG.exception(
                _("Problem '%(e)s' attempting to " "send to notification system. " "Payload=%(payload)s")
                % dict(e=e, payload=payload)
            )
コード例 #55
0
ファイル: impl_kombu.py プロジェクト: Frostman/quantum
    def reconnect(self):
        """Handles reconnecting and re-establishing queues.
        Will retry up to self.max_retries number of times.
        self.max_retries = 0 means to retry forever.
        Sleep between tries, starting at self.interval_start
        seconds, backing off self.interval_stepping number of seconds
        each attempt.
        """

        attempt = 0
        while True:
            params = self.params_list[attempt % len(self.params_list)]
            attempt += 1
            try:
                self._connect(params)
                return
            except (IOError, self.connection_errors) as e:
                pass
            except Exception, e:
                # NOTE(comstud): Unfortunately it's possible for amqplib
                # to return an error not covered by its transport
                # connection_errors in the case of a timeout waiting for
                # a protocol response.  (See paste link in LP888621)
                # So, we check all exceptions for 'timeout' in them
                # and try to reconnect in this case.
                if 'timeout' not in str(e):
                    raise

            log_info = {}
            log_info['err_str'] = str(e)
            log_info['max_retries'] = self.max_retries
            log_info.update(params)

            if self.max_retries and attempt == self.max_retries:
                LOG.error(_('Unable to connect to AMQP server on '
                            '%(hostname)s:%(port)d after %(max_retries)d '
                            'tries: %(err_str)s') % log_info)
                # NOTE(comstud): Copied from original code.  There's
                # really no better recourse because if this was a queue we
                # need to consume on, we have no way to consume anymore.
                sys.exit(1)

            if attempt == 1:
                sleep_time = self.interval_start or 1
            elif attempt > 1:
                sleep_time += self.interval_stepping
            if self.interval_max:
                sleep_time = min(sleep_time, self.interval_max)

            log_info['sleep_time'] = sleep_time
            LOG.error(_('AMQP server on %(hostname)s:%(port)d is '
                        'unreachable: %(err_str)s. Trying again in '
                        '%(sleep_time)d seconds.') % log_info)
            time.sleep(sleep_time)
コード例 #56
0
ファイル: api.py プロジェクト: soheilhy/quantum
def notify(context, publisher_id, event_type, priority, payload):
    """Sends a notification using the specified driver

    :param publisher_id: the source worker_type.host of the message
    :param event_type:   the literal type of event (ex. Instance Creation)
    :param priority:     patterned after the enumeration of Python logging
                         levels in the set (DEBUG, WARN, INFO, ERROR, CRITICAL)
    :param payload:       A python dictionary of attributes

    Outgoing message format includes the above parameters, and appends the
    following:

    message_id
      a UUID representing the id for this notification

    timestamp
      the GMT timestamp the notification was sent at

    The composite message will be constructed as a dictionary of the above
    attributes, which will then be sent via the transport mechanism defined
    by the driver.

    Message example::

        {'message_id': str(uuid.uuid4()),
         'publisher_id': 'compute.host1',
         'timestamp': timeutils.utcnow(),
         'priority': 'WARN',
         'event_type': 'compute.create_instance',
         'payload': {'instance_id': 12, ... }}

    """
    if priority not in log_levels:
        raise BadPriorityException(
            _('%s not in valid priorities') % priority)

    # Ensure everything is JSON serializable.
    payload = jsonutils.to_primitive(payload, convert_instances=True)

    msg = dict(message_id=str(uuid.uuid4()),
               publisher_id=publisher_id,
               event_type=event_type,
               priority=priority,
               payload=payload,
               timestamp=str(timeutils.utcnow()))

    for driver in _get_drivers():
        try:
            driver.notify(context, msg)
        except Exception as e:
            LOG.exception(_("Problem '%(e)s' attempting to "
                            "send to notification system. "
                            "Payload=%(payload)s")
                          % dict(e=e, payload=payload))
コード例 #57
0
 def _process_data(self, message_data):
     msg_id = message_data.pop('_msg_id', None)
     waiter = self._call_waiters.get(msg_id)
     if not waiter:
         LOG.warn(
             _('No calling threads waiting for msg_id : %(msg_id)s'
               ', message : %(data)s'), {
                   'msg_id': msg_id,
                   'data': message_data
               })
         LOG.warn(_('_call_waiters: %s') % str(self._call_waiters))
     else:
         waiter.put(message_data)