class UserConfig(object):
def __init__(self):
"""Intitate the whole class and create the object."""
self.rapumaHome = os.environ.get("RAPUMA_BASE")
self.defaultUserHome = os.environ.get("RAPUMA_USER")
self.userConfFileName = "rapuma.conf"
self.tools = Tools()
# Point to the right user config
# Look for a web installation first, if not go to default
# Note that a slash is put before var as it is off of root
# That kind of stops this from being cross-platform
rapumaWebConfig = os.path.join("/var", "lib", "rapuma", "config", self.userConfFileName)
defaultConfig = os.path.join(self.defaultUserHome, self.userConfFileName)
if os.path.exists(rapumaWebConfig):
self.userConfFile = rapumaWebConfig
else:
self.userConfFile = defaultConfig
# Check to see if the file is there, then read it in and break it into
# sections. If it fails, scream really loud!
rapumaXMLDefaults = os.path.join(self.rapumaHome, "config", "rapuma.xml")
if os.path.exists(rapumaXMLDefaults):
self.tools.sysXmlConfig = self.tools.xml_to_section(rapumaXMLDefaults)
else:
raise IOError, "Can't open " + rapumaXMLDefaults
# import pdb; pdb.set_trace()
# Now make the users local rapuma.conf file if it isn't there
if not os.path.exists(self.userConfFile):
self.initUserHome()
# Load the Rapuma conf file into an object
self.userConfig = ConfigObj(self.userConfFile, encoding="utf-8")
# Initialize the user's home folders, like resources, etc
self.makeHomeFolders()
# Log messages for this module
self.errorCodes = {"0000": ["MSG", "Placeholder message"]}
###############################################################################
############################ User Config Functions ############################
###############################################################################
def initUserHome(self):
"""Initialize a user config file on a new install or system re-init."""
# Create home folders
if not os.path.isdir(self.defaultUserHome):
os.mkdir(self.defaultUserHome)
# Make the default global rapuma.conf for custom environment settings
if not os.path.isfile(self.userConfFile):
self.userConfig = ConfigObj(self.tools.sysXmlConfig.dict(), encoding="utf-8")
self.userConfig.filename = self.userConfFile
self.userConfig["System"]["initDate"] = self.tools.tStamp()
self.userConfig.write()
def setSystemSettings(self, section, key, value):
"""Function to make system settings."""
oldValue = self.userConfig[section][key]
if oldValue != value:
self.userConfig[section][key] = value
# Write out the results
self.userConfig.write()
self.tools.terminal("\nRapuma user name setting changed from [" + oldValue + "] to [" + value + "].\n\n")
else:
self.tools.terminal("\nSame value given, nothing to changed.\n\n")
def makeHomeFolders(self):
"""Setup the default Rapuma resource folders."""
# import pdb; pdb.set_trace()
# We do not write out unless this flag is set
confWriteFlag = False
# Setup Resources section if needed
if not self.userConfig.has_key("Resources"):
self.tools.buildConfSection(self.userConfig, "Resources")
# Get the user config project folder location (or set a default)
if not self.userConfig["Resources"].has_key("projects") or not self.userConfig["Resources"]["projects"]:
projects = os.path.join(os.environ.get("HOME"), "Publishing")
if not os.path.exists(projects):
os.makedirs(projects)
self.userConfig["Resources"]["projects"] = projects
confWriteFlag = True
elif not os.path.exists(self.tools.resolvePath(self.userConfig["Resources"]["projects"])):
sys.exit(
"\nERROR: Invalid projects folder path: "
+ self.userConfig["Resources"]["projects"]
+ "\n\nProcess halted.\n"
)
else:
projects = self.tools.resolvePath(self.userConfig["Resources"]["projects"])
# Note: The following was commented because it no longer is necessary to load in locations
# for various resouces. That will be dynamically. If the program ever reaches the point
# where this would be good to have, it can be handled by a GUI. (djd - 20160223)
# # Get the user config Rapuma resource folder location
# if not self.userConfig['Resources'].has_key('rapumaResource') :
# # Check for pre-typo-fix value ('rapumaResouce') before creating new section
# if self.userConfig['Resources'].has_key('rapumaResouce') :
# self.userConfig['Resources'].rename('rapumaResouce', 'rapumaResource')
# confWriteFlag = True
# else:
# self.tools.buildConfSection(self.userConfig['Resources'], 'rapumaResource')
# confWriteFlag = True
# if len(self.userConfig['Resources']['rapumaResource']) > 0 :
# rapumaResource = self.userConfig['Resources']['rapumaResource']
# else :
# # This is the default location
# rapumaResource = os.path.join(site.USER_BASE, 'share', 'rapuma')
# self.userConfig['Resources']['rapumaResource'] = rapumaResource
# confWriteFlag = True
# # Make a list of sub-folders to make in the Rapuma resourcs folder
# resourceFolders = ['archive', 'backup', 'font', 'illustration', \
# 'macro','script', 'template']
# for r in resourceFolders :
# # Build the path and check if it can be made
# thisPath = os.path.join(rapumaResource, r)
# if not os.path.isdir(thisPath) :
# os.makedirs(thisPath)
# self.userConfig['Resources'][r] = thisPath
# confWriteFlag = True
# Write out if needed
if confWriteFlag:
self.userConfig.write()
return True
class Usfm (Group) :
'''This class contains information about a type of component
used in a type of project.'''
# Shared values
xmlConfFile = 'usfm.xml'
def __init__(self, project, cfg) :
super(Usfm, self).__init__(project, cfg)
# import pdb; pdb.set_trace()
# Set values for this manager
self.pid = project.projectIDCode
self.gid = project.gid
self.cType = 'usfm'
self.Ctype = self.cType.capitalize()
self.project = project
self.local = project.local
self.tools = Tools()
self.proj_font = ProjFont(self.pid)
self.proj_illustration = ProjIllustration(self.pid, self.gid)
self.proj_config = Config(self.pid, self.gid)
self.proj_config.getProjectConfig()
self.proj_config.getAdjustmentConfig()
self.projectConfig = self.proj_config.projectConfig
self.adjustmentConfig = self.proj_config.adjustmentConfig
self.log = project.log
self.cfg = cfg
self.mType = project.projectMediaIDCode
self.renderer = project.projectConfig['CompTypes'][self.Ctype]['renderer']
self.sourceEditor = project.projectConfig['CompTypes'][self.Ctype]['sourceEditor']
self.macPackId = project.projectConfig['CompTypes'][self.Ctype]['macroPackage']
# Get the comp settings
self.compSettings = project.projectConfig['CompTypes'][self.Ctype]
# Build a tuple of managers this component type needs to use
self.usfmManagers = ('text', self.renderer)
# Init the general managers
for self.mType in self.usfmManagers :
self.project.createManager(self.mType)
# Create the internal ref names we use in this module
self.text = self.project.managers[self.cType + '_Text']
# File names
# Folder paths
self.projScriptFolder = self.local.projScriptFolder
self.projComponentFolder = self.local.projComponentFolder
self.gidFolder = os.path.join(self.projComponentFolder, self.gid)
# File names with folder paths
self.rapumaXmlCompConfig = os.path.join(self.project.local.rapumaConfigFolder, self.xmlConfFile)
# Get persistant values from the config if there are any
newSectionSettings = self.tools.getPersistantSettings(self.projectConfig['CompTypes'][self.Ctype], self.rapumaXmlCompConfig)
if newSectionSettings != self.projectConfig['CompTypes'][self.Ctype] :
self.projectConfig['CompTypes'][self.Ctype] = newSectionSettings
# Set them here
for k, v in self.compSettings.iteritems() :
setattr(self, k, v)
# Module Error Codes
self.errorCodes = {
#'USFM-000' : ['MSG', 'Messages for the USFM module.'],
#'USFM-005' : ['MSG', 'Unassigned error message ID.'],
#'USFM-010' : ['ERR', 'Could not process character pair. This error was found: [<<1>>]. Process could not complete. - usfm.pt_tools.getNWFChars()'],
#'USFM-020' : ['ERR', 'Improper character pair found: [<<1>>]. Process could not complete. - usfm.pt_tools.getNWFChars()'],
#'USFM-025' : ['WRN', 'No non-word-forming characters were found in the PT settings file. - usfm.pt_tools.getNWFChars()'],
#'USFM-040' : ['ERR', 'Hyphenation source file not found: [<<1>>]. Process halted!'],
#'USFM-080' : ['LOG', 'Normalizing Unicode text to the [<<1>>] form.'],
#'USFM-090' : ['ERR', 'USFM file: [<<1>>] did NOT pass the validation test. Because of an encoding conversion, the terminal output is from the file [<<2>>]. Please only edit [<<1>>].'],
#'USFM-095' : ['WRN', 'Validation for USFM file: [<<1>>] was turned off.'],
#'USFM-100' : ['MSG', 'Source file editor [<<1>>] is not recognized by this system. Please double check the name used for the source text editor setting.'],
#'USFM-110' : ['ERR', 'Source file name could not be built because the Name Form ID for [<<1>>] is missing or incorrect. Double check to see which editor created the source text.'],
#'USFM-120' : ['ERR', 'Source file: [<<1>>] not found! Cannot copy to project. Process halting now.'],
#'USFM-130' : ['ERR', 'Failed to complete preprocessing on component [<<1>>]'],
#'USFM-140' : ['MSG', 'Completed installation on [<<1>>] component working text.'],
#'USFM-150' : ['ERR', 'Unable to copy [<<1>>] to [<<2>>] - error in text.'],
'0010' : ['LOG', 'Created the [<<1>>] master adjustment file.'],
'0220' : ['ERR', 'Cannot find: [<<1>>] working file, unable to complete preprocessing for rendering.'],
'0230' : ['LOG', 'Created the [<<1>>] component adjustment file.'],
'0240' : ['LOG', 'Could not find adjustments section for [<<1>>], created place holder setting.'],
'0245' : ['LOG', 'Could not find adjustments for [<<1>>]. No ajustment file has been output.'],
'0255' : ['LOG', 'Illustrations not being used. The piclist file has been removed from the [<<1>>] illustrations folder.'],
'0260' : ['LOG', 'Piclist file for [<<1>>] has been created.'],
'0265' : ['ERR', 'Failed to create piclist file for [<<1>>]!'],
'0300' : ['ERR', 'One or more illustration files are missing from the project. Please import these files before continuing.']
}
###############################################################################
############################ Functions Begin Here #############################
###############################################################################
######################## Error Code Block Series = 0200 #######################
###############################################################################
def makeFileName(self, cid) :
'''From what we know, return the full file name.'''
# FIXME: We default this to "base" but for a diglot implementation
# this is not going to work because we need to have a second
# file name. Cross that bridge...
return cid + '_base'
def makeFileNameWithExt(self, cid) :
'''From what we know, return the full file name.'''
return self.makeFileName(cid) + '.' + self.cType
def getCidPath (self, cid) :
'''Return the full path of the cName working text file. This assumes
the cid is valid.'''
return os.path.join(self.local.projComponentFolder, cid, self.makeFileNameWithExt(cid))
def getCidAdjPath (self, cid) :
'''Return the full path of the cName working text adjustments file.
This assumes the cName is valid. Note that all macro packages that have
a manual adjustment feature must use this naming scheme. The name syntax
comes from the "mother" macro package which is ptx2pdf.'''
return os.path.join(self.local.projComponentFolder, cid, self.makeFileNameWithExt(cid) + '.adj')
def render(self, gid, cidList, pages, override, save) :
'''Does USFM specific rendering of a USFM component'''
# import pdb; pdb.set_trace()
# If the whole group is being rendered, we need to preprocess it
cids = []
if not cidList :
cids = self.projectConfig['Groups'][gid]['cidList']
else :
cids = cidList
# Preprocess all subcomponents (one or more)
# Stop if it breaks at any point
for cid in cids :
if not self.preProcessGroup(gid, [cid]) :
return False
# With everything in place we can render the component.
# Note: We pass the cidList straight through
self.project.managers['usfm_' + self.renderer.capitalize()].run(gid, cidList, pages, override, save)
return True
def preProcessGroup (self, gid, cidList) :
'''This will prepare a component group for rendering by checking for
and/or creating any dependents it needs to render properly.'''
# import pdb; pdb.set_trace()
# Get some relevant settings
# FIXME: Note page border has not really been implemented yet.
# It is different from backgound management
useIllustrations = self.tools.str2bool(self.projectConfig['Groups'][gid]['useIllustrations'])
useManualAdjustments = self.tools.str2bool(self.projectConfig['Groups'][gid]['useManualAdjustments'])
# See if the working text is present for each subcomponent in the
# component and try to install it if it is not
for cid in cidList :
cType = self.cfg['cType']
cidUsfm = self.getCidPath(cid)
# Test for source here and die if it isn't there
if not os.path.isfile(cidUsfm) :
self.log.writeToLog(self.errorCodes['0220'], [cidUsfm], 'usfm.preProcessGroup():0220')
# Add/manage the dependent files for this cid
# FIXME: Some changes may be needed here to guide creation of adjustment files
# Component adjustment file
cidAdjFile = self.getCidAdjPath(cid)
if useManualAdjustments :
self.createCompAdjustmentFile(cid)
else :
# If no adjustments, remove any exsiting file
if os.path.isfile(cidAdjFile) :
os.remove(cidAdjFile)
# Component piclist file
cidPiclistFile = self.proj_illustration.getCidPiclistFile(cid)
if useIllustrations :
if self.proj_illustration.hasIllustrations(cid) :
# Check for missing illustrations (die here if not found)
if self.proj_illustration.missingIllustrations(cid) :
self.log.writeToLog(self.errorCodes['0300'])
# Create piclist file if not there or if the config has changed
if not os.path.isfile(cidPiclistFile) or self.tools.isOlder(cidPiclistFile, self.local.illustrationConfFile) :
# Now make a fresh version of the piclist file
if self.proj_illustration.createPiclistFile(cid) :
self.log.writeToLog(self.errorCodes['0260'], [cid])
else :
self.log.writeToLog(self.errorCodes['0265'], [cid])
else :
for f in [self.local.layoutConfFile, self.local.illustrationConfFile] :
if self.tools.isOlder(cidPiclistFile, f) or not os.path.isfile(cidPiclistFile) :
# Remake the piclist file
if self.proj_illustration.createPiclistFile(cid) :
self.log.writeToLog(self.errorCodes['0260'], [cid])
else :
self.log.writeToLog(self.errorCodes['0265'], [cid])
else :
# Does not seem to be any illustrations for this cid
# clean out any piclist file that might be there
if os.path.isfile(cidPiclistFile) :
os.remove(cidPiclistFile)
else :
# If we are not using illustrations then any existing piclist file will be removed
if os.path.isfile(cidPiclistFile) :
os.remove(cidPiclistFile)
self.log.writeToLog(self.errorCodes['0255'], [cid])
# Any more stuff to run?
return True
# FIXME: Moved this to xetex.py as that was the only place it was called from
#def checkStartPageNumber (self) :
#'''Adjust page number for the current group. The current logic is
#if there is no number in the startPageNumber setting, we can put
#one in there as a suggestion. If there is already one there, the
#user will be responsible for seeing that it is correct.'''
## import pdb; pdb.set_trace()
#try :
## Simply try to return anything that is in the field
#cStrPgNo = self.projectConfig['Groups'][self.gid]['startPageNumber']
#if cStrPgNo != '' :
#return cStrPgNo
#except :
## If nothing is there, we'll make a suggestion
#pGrp = str(self.projectConfig['Groups'][self.gid]['precedingGroup'])
#if pGrp == 'None' :
#self.projectConfig['Groups'][self.gid]['startPageNumber'] = 1
#self.tools.writeConfFile(self.projectConfig)
#return '1'
#else :
## Calculate the suggested number based on the preceeding group
#try :
#cStrPgNo = str(self.projectConfig['Groups'][self.gid]['startPageNumber'])
#except :
#cStrPgNo = 1
#self.projectConfig['Groups'][self.gid]['startPageNumber'] = 1
#try :
#pGrpPgs = int(self.projectConfig['Groups'][pGrp]['totalPages'])
#pGrpStrPgNo = int(self.projectConfig['Groups'][pGrp]['startPageNumber'])
#except :
## FIXME: Maybe this could go out and find out exactly how many pages were in the preceeding group
#pGrpPgs = 1
#pGrpStrPgNo = 1
#self.projectConfig['Groups'][pGrp]['totalPages'] = 1
#self.projectConfig['Groups'][pGrp]['startPageNumber'] = 1
## Whether this is right or wrong set it the way it is
#self.projectConfig['Groups'][self.gid]['startPageNumber'] = (pGrpStrPgNo + pGrpPgs)
#self.tools.writeConfFile(self.projectConfig)
#return self.projectConfig['Groups'][pGrp]['startPageNumber']
def createCompAdjustmentFile (self, cid) :
'''Create an adjustment file for this cid. If entries exsist in
the adjustment.conf file.'''
description = 'Auto-generated text adjustments file for: ' + cid + '\n'
# import pdb; pdb.set_trace()
# Check for a master adj conf file
if os.path.exists(self.local.adjustmentConfFile) :
adjFile = self.getCidAdjPath(cid)
# Clean up old file if there is one so we can start fresh
if os.path.exists(adjFile) :
os.remove(adjFile)
# Nothing to do if no gid section is found
if not self.adjustmentConfig.has_key(self.gid) :
self.tools.buildConfSection(self.adjustmentConfig, self.gid)
if not self.adjustmentConfig[self.gid].has_key(cid) :
self.tools.buildConfSection(self.adjustmentConfig[self.gid], cid)
self.adjustmentConfig[self.gid][cid]['%1.1'] = '1'
self.tools.writeConfFile(self.adjustmentConfig)
self.log.writeToLog(self.errorCodes['0240'], [cid])
return False
# Sort through commented adjustment lines ()
if self.adjustmentConfig[self.gid].has_key(cid) :
c = False
for k in self.adjustmentConfig[self.gid][cid].keys() :
if not re.search(r'%|#', k) :
c = True
if not c :
self.log.writeToLog(self.errorCodes['0245'], [cid])
return False
# If we make it this far, create the new adjustment file
with codecs.open(adjFile, "w", encoding='utf_8') as writeObject :
writeObject.write(self.tools.makeFileHeader(adjFile, description, True))
# Output like this: JAS 1.13 +1
for k, v in self.adjustmentConfig[self.gid][cid].iteritems() :
if re.search(r'%|#', k) :
continue
adj = v
if int(v) > 0 :
adj = '+' + str(v)
writeObject.write(cid.upper() + ' ' + k + ' ' + adj + '\n')
self.log.writeToLog(self.errorCodes['0230'], [self.tools.fName(adjFile)])
return True
def createProjAdjustmentConfFile (self) :
'''Create a project master component adjustment file that group component
ajustment files will be created automatically from. This will run every
time preprocess is run but after the first time it will only add a sections
for new groups or components.'''
if not os.path.exists(self.adjustmentConfFile) :
self.adjustmentConfig = ConfigObj(self.adjustmentConfFile, encoding='utf-8')
self.adjustmentConfig.filename = self.adjustmentConfFile
self.updateCompAdjustmentConf()
return True
def updateCompAdjustmentConf (self) :
'''Update an adjustmentConfig based on changes in the projectConfig.'''
for gid in self.projectConfig['Groups'].keys() :
if gid not in self.adjustmentConfig.keys() :
self.tools.buildConfSection(self.adjustmentConfig, gid)
for comp in self.projectConfig['Groups'][gid]['cidList'] :
if not self.adjustmentConfig[gid].has_key(comp) :
self.tools.buildConfSection(self.adjustmentConfig[gid], comp)
self.adjustmentConfig[gid][comp]['%1.1'] = '1'
self.tools.writeConfFile(self.adjustmentConfig)
return True
###############################################################################
######################## USFM Component Text Functions ########################
###############################################################################
######################## Error Code Block Series = 0400 #######################
###############################################################################
def getComponentType (self, gid) :
'''Return the cType for a component.'''
# import pdb; pdb.set_trace()
try :
cType = self.projectConfig['Groups'][gid]['cType']
except Exception as e :
# If we don't succeed, we should probably quite here
self.log.writeToLog('COMP-200', ['Key not found ' + str(e)])
self.tools.dieNow()
return cType
def isCompleteComponent (self, gid, cid) :
'''A two-part test to see if a component has a config entry and a file.'''
if self.hasCidFile(gid, cid) :
return True
def hasUsfmCidInfo (self, cid) :
'''Return True if this cid is in the PT USFM cid info dictionary.'''
if cid in self.usfmCidInfo().keys() :
return True
def hasCidFile (self, gid, cid) :
'''Return True or False depending on if a working file exists
for a given cName.'''
cType = self.projectConfig['Groups'][gid]['cType']
return os.path.isfile(os.path.join(self.local.projComponentFolder, cid, cid + '.' + cType))
def usfmCidInfo (self) :
'''Return a dictionary of all valid information about USFMs used in PT. Note
that a couple special non-standard IDs have been added at the top of the list.'''
# ID Comp Name Comp ID PT ID Chps
return {
'_z_' : ['USFM InternalCaller', 'usfm_internal_caller', '00', 0],
'gen' : ['Genesis', 'genesis', '01', 50],
'exo' : ['Exodus', 'exodus', '02', 40],
'lev' : ['Leviticus', 'leviticus', '03', 27],
'num' : ['Numbers', 'numbers', '04', 36],
'deu' : ['Deuteronomy', 'deuteronomy', '05', 34],
'jos' : ['Joshua', 'joshua', '06', 24],
'jdg' : ['Judges', 'judges', '07', 21],
'rut' : ['Ruth', 'ruth', '08', 4],
'1sa' : ['1 Samuel', '1_samuel', '09', 31],
'2sa' : ['2 Samuel', '2_samuel', '10', 24],
'1ki' : ['1 Kings', '1_kings', '11', 22],
'2ki' : ['2 Kings', '2_kings', '12', 25],
'1ch' : ['1 Chronicles', '1_chronicles', '13', 29],
'2ch' : ['2 Chronicles', '2_chronicles', '14', 36],
'ezr' : ['Ezra', 'ezra', '15', 10],
'neh' : ['Nehemiah', 'nehemiah', '16', 13],
'est' : ['Esther', 'esther', '17', 10],
'job' : ['Job', 'job', '18', 42],
'psa' : ['Psalms', 'psalms', '19', 150],
'pro' : ['Proverbs', 'proverbs', '20', 31],
'ecc' : ['Ecclesiastes', 'ecclesiastes', '21', 12],
'sng' : ['Song of Songs', 'song_of_songs', '22', 8],
'isa' : ['Isaiah', 'isaiah', '23', 66],
'jer' : ['Jeremiah', 'jeremiah', '24', 52],
'lam' : ['Lamentations', 'lamentations', '25', 5],
'ezk' : ['Ezekiel', 'ezekiel', '26', 48],
'dan' : ['Daniel', 'daniel', '27', 12],
'hos' : ['Hosea', 'hosea', '28', 14],
'jol' : ['Joel', 'joel', '29', 3],
'amo' : ['Amos', 'amos', '30', 9],
'oba' : ['Obadiah', 'obadiah', '31', 1],
'jon' : ['Jonah', 'jonah', '32', 4],
'mic' : ['Micah', 'micah', '33', 7],
'nam' : ['Nahum', 'nahum', '34', 3],
'hab' : ['Habakkuk', 'habakkuk', '35', 3],
'zep' : ['Zephaniah', 'zephaniah', '36', 3],
'hag' : ['Haggai', 'haggai', '37', 2],
'zec' : ['Zechariah', 'zechariah', '38', 14],
'mal' : ['Malachi', 'malachi', '39', 4],
'mat' : ['Matthew', 'matthew', '41', 28],
'mrk' : ['Mark', 'mark', '42', 16],
'luk' : ['Luke', 'luke', '43', 24],
'jhn' : ['John', 'john', '44', 21],
'act' : ['Acts', 'acts', '45', 28],
'rom' : ['Romans', 'romans', '46', 16],
'1co' : ['1 Corinthians', '1_corinthians', '47', 16],
'2co' : ['2 Corinthians', '2_corinthians', '48', 13],
'gal' : ['Galatians', 'galatians', '49', 6],
'eph' : ['Ephesians', 'ephesians', '50', 6],
'php' : ['Philippians', 'philippians', '51', 4],
'col' : ['Colossians', 'colossians', '52', 4],
'1th' : ['1 Thessalonians', '1_thessalonians', '53', 5],
'2th' : ['2 Thessalonians', '2_thessalonians', '54', 3],
'1ti' : ['1 Timothy', '1_timothy', '55', 6],
'2ti' : ['2 Timothy', '2_timothy', '56', 4],
'tit' : ['Titus', 'titus', '57', 3],
'phm' : ['Philemon', 'philemon', '58', 1],
'heb' : ['Hebrews', 'hebrews', '59', 13],
'jas' : ['James', 'james', '60', 5],
'1pe' : ['1 Peter', '1_peter', '61', 5],
'2pe' : ['2 Peter', '2_peter', '62', 3],
'1jn' : ['1 John', '1_john', '63', 5],
'2jn' : ['2 John', '2_john', '64', 1],
'3jn' : ['3 John', '3_john', '65', 1],
'jud' : ['Jude', 'jude', '66', 1],
'rev' : ['Revelation', 'revelation', '67', 22],
'tob' : ['Tobit', 'tobit', '68', '?'],
'jdt' : ['Judith', 'judith', '69', '?'],
'esg' : ['Esther', 'esther', '70', '?'],
'wis' : ['Wisdom of Solomon', 'wisdom_of_solomon', '71', '?'],
'sir' : ['Sirach', 'sirach', '72', '?'],
'bar' : ['Baruch', 'baruch', '73', '?'],
'lje' : ['Letter of Jeremiah', 'letter_of_jeremiah', '74', '?'],
's3y' : ['Song of the Three Children', 'song_3_children', '75', '?'],
'sus' : ['Susanna', 'susanna', '76', '?'],
'bel' : ['Bel and the Dragon', 'bel_dragon', '77', '?'],
'1ma' : ['1 Maccabees', '1_maccabees', '78', '?'],
'2ma' : ['2 Maccabees', '2_maccabees', '79', '?'],
'3ma' : ['3 Maccabees', '3_maccabees', '80', '?'],
'4ma' : ['4 Maccabees', '4_maccabees', '81', '?'],
'1es' : ['1 Esdras', '1_esdras', '82', '?'],
'2es' : ['2 Esdras', '2_esdras', '83', '?'],
'man' : ['Prayer of Manasses', 'prayer_of_manasses', '84', '?'],
'ps2' : ['Psalms 151', 'psalms_151', '85', '?'],
'oda' : ['Odae', 'odae', '86', '?'],
'pss' : ['Psalms of Solomon', 'psalms_of_solomon', '87', '?'],
'jsa' : ['Joshua A', 'joshua_a', '88', '?'],
'jdb' : ['Joshua B', 'joshua_b', '89', '?'],
'tbs' : ['Tobit S', 'tobit_s', '90', '?'],
'sst' : ['Susannah (Theodotion)', 'susannah_t', '91', '?'],
'dnt' : ['Daniel (Theodotion)', 'daniel_t', '92', '?'],
'blt' : ['Bel and the Dragon (Theodotion)', 'bel_dragon_t', '93', '?'],
'frt' : ['Front Matter', 'front_matter', 'A0', 0],
'int' : ['Introductions', 'introductions', 'A7', 0],
'bak' : ['Back Matter', 'back_matter', 'A1', 0],
'cnc' : ['Concordance', 'concordance', 'A8', 0],
'glo' : ['Glossary', 'glossary', 'A9', 0],
'tdx' : ['Topical Index', 'topical_index', 'B0', 0],
'ndx' : ['Names Index', 'names_index', 'B1', 0],
'xxa' : ['Extra A', 'extra_a', '94', 0],
'xxb' : ['Extra B', 'extra_b', '95', 0],
'xxc' : ['Extra C', 'extra_c', '96', 0],
'xxd' : ['Extra D', 'extra_d', '97', 0],
'xxe' : ['Extra E', 'extra_e', '98', 0],
'xxf' : ['Extra F', 'extra_f', '99', 0],
'xxg' : ['Extra G', 'extra_g', '100', 0],
'oth' : ['Other', 'other', 'A2', 0],
'eza' : ['Apocalypse of Ezra', 'apocalypse_of_ezra', 'A4', '?'],
'5ez' : ['5 Ezra', '5_ezra_lp', 'A5', '?'],
'6ez' : ['6 Ezra (Latin Epilogue)', '6_ezra_lp', 'A6', '?'],
'dag' : ['Daniel Greek', 'daniel_greek', 'B2', '?'],
'ps3' : ['Psalms 152-155', 'psalms_152-155', 'B3', '?'],
'2ba' : ['2 Baruch (Apocalypse)', '2_baruch_apocalypse', 'B4', '?'],
'lba' : ['Letter of Baruch', 'letter_of_baruch', 'B5', '?'],
'jub' : ['Jubilees', 'jubilees', 'B6', '?'],
'eno' : ['Enoch', 'enoch', 'B7', '?'],
'1mq' : ['1 Meqabyan', '1_meqabyan', 'B8', '?'],
'2mq' : ['2 Meqabyan', '2_meqabyan', 'B9', '?'],
'3mq' : ['3 Meqabyan', '3_meqabyan', 'C0', '?'],
'rep' : ['Reproof (Proverbs 25-31)', 'reproof_proverbs_25-31', 'C1', '?'],
'4ba' : ['4 Baruch (Rest of Baruch)', '4_baruch', 'C2', '?'],
'lao' : ['Laodiceans', 'laodiceans', 'C3', '?']
}
class Project (object) :
def __init__(self, pid, gid) :
'''Instantiate this class.'''
self.pid = pid
self.gid = gid
self.user = UserConfig()
self.userConfig = self.user.userConfig
self.projHome = os.path.join(os.environ['RAPUMA_PROJECTS'], self.pid)
self.config = Config(self.pid)
self.config.getProjectConfig()
self.projectConfig = self.config.projectConfig
self.cType = self.projectConfig['Groups'][self.gid]['cType']
self.Ctype = self.cType.capitalize()
self.local = ProjLocal(pid, gid, self.cType)
self.log = ProjLog(self.pid)
self.tools = Tools()
self.groups = {}
self.components = {}
self.managers = {}
self.projectMediaIDCode = self.projectConfig['ProjectInfo']['projectMediaIDCode']
self.projectIDCode = self.projectConfig['ProjectInfo']['projectIDCode']
self.projectName = self.projectConfig['ProjectInfo']['projectTitle']
self.plid = self.projectConfig['ProjectInfo']['languageCode']
self.psid = self.projectConfig['ProjectInfo']['scriptCode']
# The gid cannot generally be set yet but we will make a placeholder
# for it here and the functions below will set it. (I'm just say'n)
# import pdb; pdb.set_trace()
m = import_module('rapuma.manager.' + self.projectMediaIDCode)
self.__class__ = getattr(m, self.projectMediaIDCode[0].upper() + self.projectMediaIDCode[1:])
# Update the existing config file with the project type XML file
# if needed
newXmlDefaults = os.path.join(self.local.rapumaConfigFolder, self.projectMediaIDCode + '.xml')
xmlConfig = self.tools.getXMLSettings(newXmlDefaults)
newConf = ConfigObj(xmlConfig.dict(), encoding='utf-8').override(self.projectConfig)
for s,v in self.projectConfig.items() :
if s not in newConf :
newConf[s] = v
# Replace with new conf if new is different from old
# Rem new conf doesn't have a filename, give it one
if self.projectConfig != newConf :
self.projectConfig = newConf
self.projectConfig.filename = self.local.projectConfFile
# Log messages for this module
self.errorCodes = {
'PROJ-000' : ['MSG', 'Project module messages'],
'PROJ-030' : ['MSG', 'Changed [<<1>>][<<2>>][<<3>>] setting from \"<<4>>\" to \"<<5>>\".'],
'PROJ-040' : ['ERR', 'Problem making setting change. Section [<<1>>] missing from configuration file.'],
'PROJ-050' : ['ERR', 'Component [<<1>>] working text file was not found in the project configuration.'],
'PROJ-060' : ['ERR', 'Component [<<1>>] was not found in the project configuration.'],
'PROJ-070' : ['ERR', 'Source file not found: [<<1>>].'],
'PROJ-080' : ['MSG', 'Successful copy of [<<1>>] to [<<2>>].'],
'PROJ-090' : ['ERR', 'Target file [<<1>>] already exists. Use force (-f) to overwrite.'],
'0205' : ['LOG', 'Created the [<<1>>] manager object.'],
'0210' : ['LOG', 'Wrote out [<<1>>] settings to the project configuration file.'],
'0211' : ['ERR', 'Failed to write out project [<<1>>] settings to the project configuration file.'],
'0660' : ['ERR', 'Invalid component ID: [<<1>>].'],
}
###############################################################################
############################ Manager Level Functions ##########################
###############################################################################
######################## Error Code Block Series = 200 ########################
###############################################################################
def createManager (self, mType) :
'''Check to see if a manager is listed in the config and load it if
it is not already.'''
fullName = self.cType + '_' + mType.capitalize()
if fullName not in self.managers :
self.addManager(mType)
self.loadManager(mType)
self.log.writeToLog(self.errorCodes['0205'], [fullName])
def loadManager (self, mType) :
'''Do basic load on a manager.'''
fullName = self.cType + '_' + mType.capitalize()
cfg = self.projectConfig['Managers'][fullName]
module = import_module('rapuma.manager.' + mType)
ManagerClass = getattr(module, mType.capitalize())
manobj = ManagerClass(self, cfg, self.cType)
self.managers[fullName] = manobj
def addManager (self, mType) :
'''Create a manager reference in the project config that components
will point to.'''
# import pdb; pdb.set_trace()
fullName = self.cType + '_' + mType.capitalize()
managerDefaults = None
# Insert the Manager section if it is not already there
self.tools.buildConfSection(self.projectConfig, 'Managers')
if not self.projectConfig['Managers'].has_key(fullName) :
self.tools.buildConfSection(self.projectConfig['Managers'], fullName)
# Update settings if needed
update = False
managerDefaults = self.tools.getXMLSettings(os.path.join(self.local.rapumaConfigFolder, mType + '.xml'))
for k, v, in managerDefaults.iteritems() :
# Do not overwrite if a value is already there
if not self.projectConfig['Managers'][fullName].has_key(k) :
self.projectConfig['Managers'][fullName][k] = v
# If we are dealing with an empty string, don't bother writing out
# Trying to avoid needless conf updating here. Just in case we are
# working with a list, we'll use len()
if len(v) > 0 :
update = True
# Update the conf if one or more settings were changed
if update :
if self.tools.writeConfFile(self.projectConfig) :
self.log.writeToLog(self.errorCodes['0210'],[fullName])
else :
self.log.writeToLog(self.errorCodes['0211'],[fullName])
###############################################################################
############################ Group Level Functions ############################
###############################################################################
####################### Error Code Block Series = 0600 ########################
###############################################################################
def renderGroup (self, cidList = '', pages = '', override = '', save = False) :
'''Render a group of subcomponents or any number of components
in the group specified in the cidList.'''
# import pdb; pdb.set_trace()
# If there are any cids listed we need to test them
if cidList :
self.isValidCidList(cidList)
# Otherwise, do a basic test for exsistance and move on
if self.projectConfig['Groups'].has_key(self.gid) :
# Now create the group and pass the params on
self.createGroup().render(self.gid, cidList, pages, override, save)
return True
def createGroup (self) :
'''Create a group object that can be acted on. It is assumed
this only happens for one group per session. This group
will contain one or more compoenents. The information for
each one will be contained in the group object.'''
# import pdb; pdb.set_trace()
# If the object already exists just return it
if self.gid in self.groups:
return self.groups[self.gid]
cType = self.projectConfig['Groups'][self.gid]['cType']
# Create a special component object if called
cfg = self.projectConfig['Groups'][self.gid]
module = import_module('rapuma.group.' + cType)
ManagerClass = getattr(module, cType.capitalize())
groupObj = ManagerClass(self, cfg)
self.groups[self.gid] = groupObj
return groupObj
def isValidCidList (self, thisCidlist) :
'''Check to see if all the components in the list are in the group.'''
cidList = self.projectConfig['Groups'][self.gid]['cidList']
for cid in thisCidlist :
# If this is not a usfm type we do not need to validate
if self.cType == 'usfm' :
if not cid in cidList :
self.log.writeToLog(self.errorCodes['0660'],[cid])
def listAllComponents (self, cType) :
'''Generate a list of valid component IDs and cNames for this cType.'''
# Create the component object now with a special component caller ID
self.createComponent('usfm_internal_caller')
# Get the component info dictionary
comps = self.components['usfm_internal_caller'].usfmCidInfo()
# List and sort
cList = list(comps.keys())
cList.sort()
# For now we'll output to terminal but may want to change this later.
for c in cList :
if c != '_z_' :
print c, comps[c][1]
###############################################################################
############################ System Level Functions ###########################
###############################################################################
def run (self, command, opts, userConfig) :
'''Run a command'''
if command in self.commands :
self.commands[command].run(opts, self, userConfig)
else :
self.tools.terminalError('The command: [' + command + '] failed to run with these options: ' + str(opts))
class ProjFont (object) :
def __init__(self, pid) :
'''Do the primary initialization for this class.'''
self.pid = pid
self.tools = Tools()
self.user = UserConfig()
self.log = ProjLog(pid)
self.userConfig = self.user.userConfig
self.proj_config = Config(pid)
self.proj_config.getProjectConfig()
self.projectConfig = self.proj_config.projectConfig
self.proj_config.getFontConfig()
self.fontConfig = self.proj_config.fontConfig
self.local = ProjLocal(pid, self.projectConfig)
# Load all font settings for use in this module
if self.fontConfig :
for k, v in self.fontConfig['GeneralSettings'].iteritems() :
setattr(self, k, v)
# Log messages for this module
self.errorCodes = {
'FONT-000' : ['MSG', 'Font module messages'],
'FONT-005' : ['MSG', 'FONT-005 - Unassigned error message ID.'],
'FONT-015' : ['MSG', 'FONT-015 - Unassigned error message ID.'],
'FONT-020' : ['ERR', 'Failed to find font setting in ParaTExt project (.ssf file). A primary font must be set before this component can be successfully rendered.'],
'FONT-025' : ['ERR', 'No source editor was found for this project. Please enter this setting before continuing.'],
'FONT-042' : ['MSG', 'The [<<1>>] font setup information was added to project config'],
'FONT-050' : ['ERR', 'Halt! [<<1>>] not found. - font.copyInFont()'],
'FONT-070' : ['LOG', 'Copied the [<<1>>] font file into the project. - proj_font.copyInFont()'],
'FONT-100' : ['ERR', 'This function has not been implemented yet!. - proj_font.setGlyphMap()'],
'0010' : ['LOG', 'Wrote out new font configuration (font.__init__())'],
'1220' : ['ERR', 'The Font bundle file [<<1>>] could not be found. Process halted.'],
'1235' : ['MSG', 'Font [<<1>>] has been installed into the project.'],
'1237' : ['MSG', 'Font [<<1>>] has been updated.'],
'1240' : ['ERR', 'Font bundle file [<<1>>] not found.'],
'1241' : ['ERR', 'Font bundle [<<1>>] not found.'],
'1245' : ['LOG', '<<1>> font setup information added to project config'],
'1250' : ['ERR', 'The [<<1>>] font is apparently part of this project. Please remove before trying to re-add this font.'],
'1260' : ['MSG', 'The <<1>> font bundle has been copied into the project font folder.'],
'1262' : ['LOG', 'The <<1>> font bundle already exsits in the font folder.'],
'1265' : ['ERR', 'Failed to extract the [<<1>>] font bundle into the project. Font install process failed.'],
'1267' : ['LOG', 'The <<1>> font bundle has been copied into the project font folder.'],
'1280' : ['MSG', 'Failed to install the font: [<<1>>] into the project.'],
'1370' : ['LOG', 'Removed [<<1>>] font name from project component type: [<<2>>].'],
'1380' : ['MSG', 'Removed the [<<1>>] font from the project.'],
'1382' : ['MSG', 'Force switch was set (-f). This process has completely removed the [<<1>>] font and settings from the project. - proj_font.removeFont()'],
'1390' : ['LOG', 'Removed the [<<1>>] font package.'],
'1395' : ['MSG', 'Could not remove the [<<1>>] font package. It may be used by another group. Use force (-f) to remove the package from the font folder.']
}
###############################################################################
############################ Project Level Functions ##########################
###############################################################################
######################## Error Code Block Series = 1000 #######################
###############################################################################
def setGlyphMap (self, cType, font) :
'''If needed, set the glyph map used for this component type font.'''
self.log.writeToLog('FONT-100')
def getFontIdFromFileName (self, fileName) :
'''Return the font ID based on the file name'''
# File name less ext is the font ID
parts = len(fileName.split('.'))
return '.'.join(fileName.split('.')[:parts-1])
def getFontIdFromSource (self, source) :
'''Return the font ID based on the complete path and file name.'''
# Get the file name from the path
fileName = self.tools.fName(source)
# Return the font ID
return self.getFontIdFromFileName(fileName)
def recordFont (self, fontId, cType=None) :
'''Check for the exsitance of the specified font in the font folder.
Then extract the meta data into the appropreate configurations.'''
# import pdb; pdb.set_trace()
# Set vars do initial checks
metaDataSource = os.path.join(self.local.projFontFolder, fontId, fontId + '.xml')
if not os.path.isfile(metaDataSource) :
self.log.writeToLog(self.errorCodes['1240'], [fontId + '.xml', 'proj_font.recordFont():1240'])
# Build the Fonts section in the config (if needed)
self.tools.buildConfSection(self.fontConfig, 'Fonts')
# (Re)Inject the font info into the macPack config file.
fInfo = self.tools.getXMLSettings(metaDataSource)
self.fontConfig['Fonts'][fontId] = fInfo.dict()
# Save the settings now
self.tools.writeConfFile(self.fontConfig)
# If a component type was specified, record that as well
if cType :
self.projectConfig['CompTypes'][cType.capitalize()]['fontName'] = fontId
self.tools.writeConfFile(self.projectConfig)
return True
def copyInFont (self, source) :
'''Copy a font into a project. The font is bundled with other
necessary components in a .zip file. If the font folder is
already there we assume there is a font there and we do not
proceed. The user will be prompted to remove the old one first.'''
fontId = self.getFontIdFromSource(source)
confXml = os.path.join(self.local.projFontFolder, fontId, fontId + '.xml')
if not os.path.isfile(source) :
self.log.writeToLog(self.errorCodes['1220'], [source])
# Install new copy
if self.tools.pkgExtract(source, self.local.projFontFolder, confXml) :
self.log.writeToLog(self.errorCodes['1260'], [self.tools.fName(source)])
return True
else :
self.log.writeToLog(self.errorCodes['1265'], [fontId])
return False
def addFont (self, source, cType=None) :
'''It is a three step process to install a font. This will both
copy in a font and record it in one call. Do not try to
install a substitute font. Path is assumed to exsist and contains
the file name too.'''
# import pdb; pdb.set_trace()
fontId = self.getFontIdFromSource(source)
# Check for existance, never copy over
if self.isFont(fontId) :
self.log.writeToLog(self.errorCodes['1250'], [fontId])
# Now install and record
if self.copyInFont(source) and self.recordFont(fontId, cType) :
self.log.writeToLog(self.errorCodes['1235'], [fontId])
return True
else :
self.log.writeToLog(self.errorCodes['1280'], [fontId])
return False
def updateFontPack (self, source, cType=None) :
'''Update a font package but do not change any of the existing
settings. If there are setting issues (changes) it would be
best to remove, then reinstall. A potential confusion point
is that updating a font normally means changing the ID. Then
updating actually becomes just installing a font.'''
# import pdb; pdb.set_trace()
# Get the font ID
fontId = self.getFontIdFromSource(source)
# Be sure the font is in the project
if self.isFont(fontId) :
# Remove old copy
if os.path.exists(os.path.join(self.local.projFontFolder, fontId)) :
shutil.rmtree(os.path.join(self.local.projFontFolder, fontId))
# Bring in a fresh copy
if self.copyInFont(source) :
# If a component type was specified, record that as well
if cType :
self.projectConfig['CompTypes'][cType.capitalize()]['fontName'] = fontId
self.tools.writeConfFile(self.projectConfig)
self.log.writeToLog(self.errorCodes['1237'], [fontId])
return True
def removeFontSettings (self, fontId) :
'''Remove the font settings from the project.'''
# import pdb; pdb.set_trace()
if self.fontConfig.has_key('Fonts') :
if self.fontConfig['Fonts'].has_key(fontId) :
del self.fontConfig['Fonts'][fontId]
# Write out the new settings files
self.tools.writeConfFile(self.fontConfig)
self.log.writeToLog(self.errorCodes['1380'], [fontId])
# Check to see if this font is listed in any of the cTypes
# If so, remove it.
found = 0
for cType in self.projectConfig['CompTypes'].keys() :
# It might be possible that the cType has no font settings, so we check
if self.projectConfig['CompTypes'][cType.capitalize()].has_key('fontName') :
if self.projectConfig['CompTypes'][cType.capitalize()]['fontName'] == fontId :
self.projectConfig['CompTypes'][cType.capitalize()]['fontName'] = ''
self.log.writeToLog(self.errorCodes['1370'], [fontId, cType])
found +=1
if found > 0 :
self.tools.writeConfFile(self.projectConfig)
return True
def removeFontPack (self, fontId) :
'''Remove a font from a component type which will virtually disconnect
it from the calling component type. However, if the force switch is set,
then remove the font, regardless as to if it is used by another component
or not. This is useful for purging a font from a project but should be
used with care.'''
# Purge the font files and folder
fontDir = os.path.join(self.local.projFontFolder, fontId)
if os.path.exists(fontDir) :
shutil.rmtree(fontDir)
self.log.writeToLog(self.errorCodes['1390'], [fontId])
if self.removeFontSettings(fontId) :
return True
###############################################################################
############################ Font Settings Functions ##########################
###############################################################################
######################## Error Code Block Series = 2000 #######################
###############################################################################
def isFont (self, fontId) :
'''Return if it is varified that this font is part of the project.'''
# First do a cusory check to see if at least the font folder is there
fontDir = os.path.join(self.local.projFontFolder, fontId)
if not os.path.exists(fontDir) :
return False
# If the above passed, check in the font config to see if it is listed
if not self.fontConfig['Fonts'].has_key(fontId) :
return False
# If the two tests above passed it is probably there
return True
