def interp_ds( anom, base, src_crs, src_nodata, dst_nodata, src_transform, resample_type='bilinear',*args, **kwargs ):
'''
anom = [numpy.ndarray] 2-d array representing a single monthly timestep of the data to be downscaled.
Must also be representative of anomalies.
base = [str] filename of the corresponding baseline monthly file to use as template and downscale
baseline for combining with anomalies.
src_transform = [affine.affine] 6 element affine transform of the input anomalies. [should be greenwich-centered]
resample_type = [str] one of ['bilinear', 'count', 'nearest', 'mode', 'cubic', 'index', 'average', 'lanczos', 'cubic_spline']
'''
import rasterio
from rasterio.warp import reproject, RESAMPLING
resampling = {'average':RESAMPLING.average,
'cubic':RESAMPLING.cubic,
'lanczos':RESAMPLING.lanczos,
'bilinear':RESAMPLING.bilinear,
'cubic_spline':RESAMPLING.cubic_spline,
'mode':RESAMPLING.mode,
'count':RESAMPLING.count,
'index':RESAMPLING.index,
'nearest':RESAMPLING.nearest }
base = rasterio.open( base )
baseline_arr = base.read( 1 )
baseline_meta = base.meta
baseline_meta.update( compress='lzw' )
output_arr = np.empty_like( baseline_arr )
reproject( anom, output_arr, src_transform=src_transform, src_crs=src_crs, src_nodata=src_nodata, \
dst_transform=baseline_meta['affine'], dst_crs=baseline_meta['crs'],\
dst_nodata=dst_nodata, resampling=resampling[ resample_type ], SOURCE_EXTRA=1000 )
return output_arr
def run( df, meshgrid_tuple, lons_pcll, template_raster_fn, src_transform, src_crs, src_nodata, output_filename ): ''' run the interpolation to a grid, and reprojection / resampling to the Alaska / Canada rasters extent, resolution, origin (template_raster). This function is intended to be used to run a pathos.multiprocessing Pool's map function across a list of pre-computed arguments. RETURNS: [str] path to the output filename generated ''' template_raster = rasterio.open( template_raster_fn ) interp_arr = xyz_to_grid( np.array(df['lon'].tolist()), \ np.array(df['lat'].tolist()), \ np.array(df['anom'].tolist()), grid=meshgrid_tuple, method='cubic' ) src_nodata = -9999.0 # nodata interp_arr[ np.isnan( interp_arr ) ] = src_nodata dat, lons = shiftgrid( 180., interp_arr, lons_pcll, start=False ) output_arr = np.empty_like( template_raster.read( 1 ) ) # mask it with the internal mask in the template raster, where 0 is oob. output_arr = np.ma.masked_where( template_raster.read_masks( 1 ) == 0, output_arr ) template_meta = template_raster.meta if 'transform' in template_meta.keys(): template_meta.pop( 'transform' ) reproject( dat, output_arr, src_transform=src_transform, src_crs=src_crs, src_nodata=src_nodata, \ dst_transform=template_meta['affine'], dst_crs=template_meta['crs'],\ dst_nodata=None, resampling=RESAMPLING.nearest, num_threads=1, SOURCE_EXTRA=1000 ) return write_gtiff( output_arr, template_meta, output_filename, compress=True )
def test_reproject_ndarray():
with rasterio.drivers():
with rasterio.open('tests/data/RGB.byte.tif') as src:
source = src.read_band(1)
dst_crs = dict(
proj='merc',
a=6378137,
b=6378137,
lat_ts=0.0,
lon_0=0.0,
x_0=0.0,
y_0=0,
k=1.0,
units='m',
nadgrids='@null',
wktext=True,
no_defs=True)
out = numpy.empty(src.shape, dtype=numpy.uint8)
reproject(
source,
out,
src_transform=src.transform,
src_crs=src.crs,
dst_transform=DST_TRANSFORM,
dst_crs=dst_crs,
resampling=RESAMPLING.nearest)
assert (out > 0).sum() == 438146
def _warp(self, proj_data, bands, new_bands):
self.output("Projecting", normal=True, arrow=True)
for i, band in enumerate(bands):
self.output("band %s" % self.bands[i], normal=True, color='green', indent=1)
reproject(band, new_bands[i], src_transform=proj_data['transform'], src_crs=proj_data['crs'],
dst_transform=proj_data['dst_transform'], dst_crs=self.dst_crs, resampling=RESAMPLING.nearest,
num_threads=2)
def warp_tif(combined_tif_path, warped_tif_path, dst_crs={
'init': 'EPSG:3857'
}):
logger.info('Warping tif to web mercator: %s', combined_tif_path)
with rasterio.open(combined_tif_path) as src:
meta = src.meta
new_meta = meta.copy()
transform, width, height = calculate_default_transform(
src.crs, dst_crs, src.width, src.height, *src.bounds)
new_meta.update({
'crs': dst_crs,
'transform': transform,
'width': width,
'height': height,
'nodata': -28762
})
with rasterio.open(
warped_tif_path, 'w', compress='DEFLATE', tiled=True,
**new_meta) as dst:
for i in range(1, src.count):
reproject(
source=rasterio.band(src, i),
destination=rasterio.band(dst, i),
src_transform=src.transform,
src_crs=src.crs,
dst_transform=transform,
dst_crs=dst_crs,
resampling=Resampling.nearest,
src_nodata=-28762
)
def test_resample_default_invert_proj(method):
"""Nearest and bilinear should produce valid results
with the default Env
"""
with rasterio.open("tests/data/world.rgb.tif") as src:
source = src.read(1)
profile = src.profile.copy()
dst_crs = {"init": "epsg:32619"}
# Calculate the ideal dimensions and transformation in the new crs
dst_affine, dst_width, dst_height = calculate_default_transform(
src.crs, dst_crs, src.width, src.height, *src.bounds
)
profile["height"] = dst_height
profile["width"] = dst_width
out = np.empty(shape=(dst_height, dst_width), dtype=np.uint8)
out = np.empty(src.shape, dtype=np.uint8)
reproject(
source,
out,
src_transform=src.transform,
src_crs=src.crs,
dst_transform=dst_affine,
dst_crs=dst_crs,
resampling=method,
)
assert out.mean() > 0
def test_reproject_gcps(rgb_byte_profile):
"""Reproject using ground control points for the source"""
source = np.ones((3, 800, 800), dtype=np.uint8) * 255
out = np.zeros(
(3, rgb_byte_profile["height"], rgb_byte_profile["height"]), dtype=np.uint8
)
src_gcps = [
GroundControlPoint(row=0, col=0, x=156113, y=2818720, z=0),
GroundControlPoint(row=0, col=800, x=338353, y=2785790, z=0),
GroundControlPoint(row=800, col=800, x=297939, y=2618518, z=0),
GroundControlPoint(row=800, col=0, x=115698, y=2651448, z=0),
]
reproject(
source,
out,
src_crs="epsg:32618",
gcps=src_gcps,
dst_transform=rgb_byte_profile["transform"],
dst_crs=rgb_byte_profile["crs"],
resampling=Resampling.nearest,
)
assert not out.all()
assert not out[:, 0, 0].any()
assert not out[:, 0, -1].any()
assert not out[:, -1, -1].any()
assert not out[:, -1, 0].any()
def test_reproject_ndarray():
with rasterio.open("tests/data/RGB.byte.tif") as src:
source = src.read(1)
dst_crs = dict(
proj="merc",
a=6378137,
b=6378137,
lat_ts=0.0,
lon_0=0.0,
x_0=0.0,
y_0=0,
k=1.0,
units="m",
nadgrids="@null",
wktext=True,
no_defs=True,
)
out = np.empty(src.shape, dtype=np.uint8)
reproject(
source,
out,
src_transform=src.transform,
src_crs=src.crs,
dst_transform=DST_TRANSFORM,
dst_crs=dst_crs,
resampling=Resampling.nearest,
)
assert (out > 0).sum() == 438113
def downscale_wrapper( arr, affine, crs, baseline, output_filename, downscaling_operation, post_downscale_function ):
# rotate
if ( self.data.ds.lon > 200.0 ).any() == True:
dat, lons = utils.shiftgrid( 180., self.data.anomalies, self.historical.ds.lon, start=False )
a,b,c,d,e,f,g,h,i = affine #flip it to the greenwich-centering
src_transform = affine.Affine( a, b, -180.0, d, e, 180.0 )
else:
dat, lons = ( self.data.ds, self.historical.ds.lon )
src_transform = affine
# reproject / resample
src_crs = {'init':'epsg:4326'}
src_nodata = None # DangerTown™
baseline_meta = baseline.meta
baseline_meta.update( compress='lzw' )
output_arr = np.empty_like( baeline.read( 1 ) )
# TODO: make this function available for manipulation if used for different needs
reproject( arr, output_arr, src_transform=src_transform, src_crs=src_crs, src_nodata=src_nodata, \
dst_transform=baseline_meta['affine'], dst_crs=baseline_meta['crs'],\
dst_nodata=None, resampling=RESAMPLING.cubic_spline, SOURCE_EXTRA=1000 )
# downscale
return utils.downscale( arr, output_arr, output_filename, downscaling_operation, \
baseline_meta, post_downscale_function, mask=None, mask_value=0 )
def test_reproject_resampling_alpha(method):
"""Reprojection of a source with alpha band succeeds"""
# Expected count of nonzero pixels for each resampling method, based
# on running rasterio with each of the following configurations
expected = {
Resampling.nearest: 438113,
Resampling.bilinear: 439280,
Resampling.cubic: 437888,
Resampling.cubic_spline: 440475,
Resampling.lanczos: 436001,
Resampling.average: 439419,
Resampling.mode: 437298,
Resampling.max: 439464,
Resampling.min: 436397,
Resampling.med: 437194,
Resampling.q1: 436397,
Resampling.q3: 438948,
}
with rasterio.open("tests/data/RGBA.byte.tif") as src:
source = src.read(1)
out = np.empty(src.shape, dtype=np.uint8)
reproject(
source,
out,
src_transform=src.transform,
src_crs=src.crs,
dst_transform=DST_TRANSFORM,
dst_crs={"init": "epsg:3857"},
resampling=method,
)
assert np.count_nonzero(out) == expected[method]
def test_reproject_multi():
"""Ndarry to ndarray."""
with rasterio.open("tests/data/RGB.byte.tif") as src:
source = src.read()
dst_crs = dict(
proj="merc",
a=6378137,
b=6378137,
lat_ts=0.0,
lon_0=0.0,
x_0=0.0,
y_0=0,
k=1.0,
units="m",
nadgrids="@null",
wktext=True,
no_defs=True,
)
destin = np.empty(source.shape, dtype=np.uint8)
reproject(
source,
destin,
src_transform=src.transform,
src_crs=src.crs,
dst_transform=DST_TRANSFORM,
dst_crs=dst_crs,
resampling=Resampling.nearest,
)
assert destin.any()
def test_reproject_multi():
"""Ndarry to ndarray"""
with rasterio.drivers():
with rasterio.open('tests/data/RGB.byte.tif') as src:
source = src.read()
dst_crs = dict(
proj='merc',
a=6378137,
b=6378137,
lat_ts=0.0,
lon_0=0.0,
x_0=0.0,
y_0=0,
k=1.0,
units='m',
nadgrids='@null',
wktext=True,
no_defs=True)
destin = numpy.empty(source.shape, dtype=numpy.uint8)
reproject(
source,
destin,
src_transform=src.transform,
src_crs=src.crs,
dst_transform=DST_TRANSFORM,
dst_crs=dst_crs,
resampling=RESAMPLING.nearest)
assert destin.any()
def to_srs_like(self, rgrid, src_nodata=None, dst_nodata=None,
resampling=Resampling.bilinear):
if src_nodata is None:
src_nodata = self.fill_value
if dst_nodata is None:
dst_nodata = src_nodata
source = self.copy()
source.fill_underlying_data(src_nodata)
# dst_shape = rgrid.shape
dst_transform = rgrid.gtransform
dst_crs = rgrid.crs
destination = rgrid.astype(self.dtype).copy()
reproject(
source,
destination=destination,
src_transform=self.gtransform,
src_nodata=src_nodata,
src_crs=self.crs,
dst_transform=dst_transform,
dst_crs=dst_crs,
resampling=resampling,
dst_nodata=dst_nodata)
destination.masked_equal(dst_nodata)
return destination
def test_warp_from_file():
"""File to ndarray"""
with rasterio.open('tests/data/RGB.byte.tif') as src:
dst_transform = affine.Affine.from_gdal(-8789636.708, 300.0, 0.0, 2943560.235, 0.0, -300.0)
dst_crs = dict(
proj='merc',
a=6378137,
b=6378137,
lat_ts=0.0,
lon_0=0.0,
x_0=0.0,
y_0=0,
k=1.0,
units='m',
nadgrids='@null',
wktext=True,
no_defs=True)
destin = numpy.empty(src.shape, dtype=numpy.uint8)
reproject(
rasterio.band(src, 1),
destin,
dst_transform=dst_transform,
dst_crs=dst_crs)
assert destin.any()
try:
import matplotlib.pyplot as plt
plt.imshow(destin)
plt.gray()
plt.savefig('test_warp_from_filereproject.png')
except:
pass
def warp_raster_to_template(input_raster_file, template_raster_file, output_file):
print "reprojecting raster"
with rasterio.open(input_raster_file) as input_r:
with rasterio.open(template_raster_file) as template_r:
input_array = input_r.read(1)
dest_array = np.zeros((template_r.width, template_r.height), dtype=input_array.dtype)
reproject(
input_array,
dest_array,
src_transform=input_r.affine,
src_crs=input_r.crs,
dst_transform=template_r.affine,
dst_crs=template_r.crs,
resampling=Resampling.nearest)
print "now saving raster"
with rasterio.open(output_file, 'w',
driver = "GTiff",
width=template_r.width,
height=template_r.height,
count=1,
dtype=dest_array.dtype,
crs=template_r.crs,
transform=template_r.affine,
nodata=0
) as output:
output.write(dest_array, indexes=1)
def interp_ds( anom, base, output_filename, src_transform, downscaling_operation, post_downscale_function=None, mask=None, mask_value=0 ):
'''
anom = [numpy.ndarray] 2-d array representing a single monthly timestep of the data to be downscaled. Must also be representative of anomalies.
base = [str] filename of the corresponding baseline monthly file to use as template and downscale baseline for combining with anomalies.
output_filename = [str] path to the output file to be created following downscaling
src_transform = [affine.affine] 6 element affine transform of the input anomalies. [should be greenwich-centered]
downscaling_operation = [str] one of 'add' or 'mult' depending on absolute or relative delta downscaling.
post_downscale_function = [function] function that takes as input a single 2-d array and returns a 2-d array in the same shape as the input.
mask = [numpy.ndarray] 2-d array showing what values should be masked. Masked=0, unmasked=1. must be same shape as base.
mask_value = [int] what value to use as the masked values. default=0.
'''
from rasterio.warp import reproject, RESAMPLING
# reproject / resample
src_crs = {'init':'epsg:4326'}
src_nodata = None # DangerTown™
base = rasterio.open( base )
baseline_arr = base.read( 1 )
baseline_meta = base.meta
baseline_meta.update( compress='lzw' )
output_arr = np.empty_like( baseline_arr )
# TODO: make this function available for manipulation if used for different needs
reproject( anom, output_arr, src_transform=src_transform, src_crs=src_crs, src_nodata=src_nodata, \
dst_transform=baseline_meta['affine'], dst_crs=baseline_meta['crs'],\
dst_nodata=None, resampling=RESAMPLING.cubic_spline, SOURCE_EXTRA=1000 )
# downscale
return utils.downscale( output_arr, baseline_arr, output_filename, downscaling_operation, \
baseline_meta, post_downscale_function, mask, mask_value )
def test_warp_from_to_file(tmpdir):
"""File to file"""
tiffname = str(tmpdir.join('foo.tif'))
with rasterio.open('tests/data/RGB.byte.tif') as src:
dst_transform = affine.Affine.from_gdal(-8789636.708, 300.0, 0.0, 2943560.235, 0.0, -300.0)
dst_crs = dict(
proj='merc',
a=6378137,
b=6378137,
lat_ts=0.0,
lon_0=0.0,
x_0=0.0,
y_0=0,
k=1.0,
units='m',
nadgrids='@null',
wktext=True,
no_defs=True)
kwargs = src.meta.copy()
kwargs.update(
transform=dst_transform,
crs=dst_crs)
with rasterio.open(tiffname, 'w', **kwargs) as dst:
for i in (1, 2, 3):
reproject(rasterio.band(src, i), rasterio.band(dst, i))
def test_target_aligned_pixels():
"""Issue 853 has been resolved"""
with rasterio.open('tests/data/world.rgb.tif') as src:
source = src.read(1)
profile = src.profile.copy()
dst_crs = {'init': 'epsg:3857'}
with rasterio.Env(CHECK_WITH_INVERT_PROJ=False):
# Calculate the ideal dimensions and transformation in the new crs
dst_affine, dst_width, dst_height = calculate_default_transform(
src.crs, dst_crs, src.width, src.height, *src.bounds)
dst_affine, dst_width, dst_height = aligned_target(dst_affine, dst_width, dst_height, 100000.0)
profile['height'] = dst_height
profile['width'] = dst_width
out = np.empty(shape=(dst_height, dst_width), dtype=np.uint8)
reproject(
source,
out,
src_transform=src.transform,
src_crs=src.crs,
dst_transform=dst_affine,
dst_crs=dst_crs,
resampling=Resampling.nearest)
# Check that there is no black borders
assert out[:, 0].all()
assert out[:, -1].all()
assert out[0, :].all()
assert out[-1, :].all()
def test_reproject_resampling(path_rgb_byte_tif, method):
# Expected count of nonzero pixels for each resampling method, based
# on running rasterio with each of the following configurations
expected = {
Resampling.nearest: 438113,
Resampling.bilinear: 439280,
Resampling.cubic: 437888,
Resampling.cubic_spline: 440475,
Resampling.lanczos: 436001,
Resampling.average: 439419,
Resampling.mode: 437298,
Resampling.max: 439464,
Resampling.min: 436397,
Resampling.med: 437194,
Resampling.q1: 436397,
Resampling.q3: 438948
}
with rasterio.open(path_rgb_byte_tif) as src:
source = src.read(1)
out = np.empty(src.shape, dtype=np.uint8)
reproject(
source,
out,
src_transform=src.transform,
src_crs=src.crs,
dst_transform=DST_TRANSFORM,
dst_crs={'init': 'EPSG:3857'},
resampling=method)
assert np.count_nonzero(out) == expected[method]
def test_warp_from_to_file_multi(tmpdir):
"""File to file"""
tiffname = str(tmpdir.join('foo.tif'))
with rasterio.open('tests/data/RGB.byte.tif') as src:
dst_crs = dict(
proj='merc',
a=6378137,
b=6378137,
lat_ts=0.0,
lon_0=0.0,
x_0=0.0,
y_0=0,
k=1.0,
units='m',
nadgrids='@null',
wktext=True,
no_defs=True)
kwargs = src.meta.copy()
kwargs.update(
transform=DST_TRANSFORM,
crs=dst_crs)
with rasterio.open(tiffname, 'w', **kwargs) as dst:
for i in (1, 2, 3):
reproject(
rasterio.band(src, i),
rasterio.band(dst, i),
num_threads=2)
def test_reproject_identity():
"""Reproject with an identity matrix."""
# note the affines are both positive e, src is identity
src = np.random.random(25).reshape((1, 5, 5))
srcaff = Affine(1.0, 0.0, 0.0, 0.0, 1.0, 0.0) # Identity
srccrs = {'init': 'epsg:3857'}
dst = np.empty(shape=(1, 10, 10))
dstaff = Affine(0.5, 0.0, 0.0, 0.0, 0.5, 0.0)
dstcrs = {'init': 'epsg:3857'}
reproject(
src, dst,
src_transform=srcaff,
src_crs=srccrs,
dst_transform=dstaff,
dst_crs=dstcrs,
resampling=Resampling.nearest)
# note the affines are both positive e, dst is identity
src = np.random.random(100).reshape((1, 10, 10))
srcaff = Affine(0.5, 0.0, 0.0, 0.0, 0.5, 0.0)
srccrs = {'init': 'epsg:3857'}
dst = np.empty(shape=(1, 5, 5))
dstaff = Affine(1.0, 0.0, 0.0, 0.0, 1.0, 0.0) # Identity
dstcrs = {'init': 'epsg:3857'}
reproject(
src, dst,
src_transform=srcaff,
src_crs=srccrs,
dst_transform=dstaff,
dst_crs=dstcrs,
resampling=Resampling.nearest)
def test_resample_no_invert_proj(method):
"""Nearest and bilinear should produce valid results with
CHECK_WITH_INVERT_PROJ = False
"""
if not supported_resampling(method):
pytest.skip()
with rasterio.Env(CHECK_WITH_INVERT_PROJ=False):
with rasterio.open('tests/data/world.rgb.tif') as src:
source = src.read(1)
profile = src.profile.copy()
dst_crs = {'init': 'EPSG:32619'}
# Calculate the ideal dimensions and transformation in the new crs
dst_affine, dst_width, dst_height = calculate_default_transform(
src.crs, dst_crs, src.width, src.height, *src.bounds)
profile['height'] = dst_height
profile['width'] = dst_width
out = np.empty(shape=(dst_height, dst_width), dtype=np.uint8)
# see #614, some resamplin methods succeed but produce blank images
out = np.empty(src.shape, dtype=np.uint8)
reproject(
source,
out,
src_transform=src.transform,
src_crs=src.crs,
dst_transform=dst_affine,
dst_crs=dst_crs,
resampling=method)
assert out.mean() > 0
def test_reproject_dst_nodata_default():
"""
If nodata is not provided, destination will be filled with 0
instead of nodata
"""
params = default_reproject_params()
with rasterio.drivers():
source = numpy.ones((params.width, params.height), dtype=numpy.uint8)
out = numpy.zeros((params.dst_width, params.dst_height),
dtype=source.dtype)
out.fill(120) # Fill with arbitrary value
reproject(
source,
out,
src_transform=params.src_transform,
src_crs=params.src_crs,
dst_transform=params.dst_transform,
dst_crs=params.dst_crs
)
assert (out == 1).sum() == 4461
assert (out == 0).sum() == (params.dst_width *
params.dst_height - 4461)
def resample_to_1km(x):
"""
template_raster_mask should be a mask in in the res/extent/origin/crs of the
existing TEM IEM products.
"""
fn, output_filename, template_raster_mask_fn = x
import rasterio, os
from rasterio.warp import RESAMPLING, reproject
import numpy as np
rst = rasterio.open(fn)
rst_arr = rst.read(1)
fn = os.path.basename(fn)
fn_split = fn.split(".")[0].split("_")
template_raster_mask = rasterio.open(template_raster_mask_fn)
template_arr = template_raster_mask.read(1)
template_meta = template_raster_mask.meta
template_meta.update(compress="lzw", nodata=rst.nodata, dtype="float32")
if "transform" in template_meta.keys():
template_meta.pop("transform")
output_arr = np.empty_like(template_arr.astype(np.float32))
output_arr[template_arr == 0] = rst.nodata
epsg3338 = {"init": "epsg:3338"}
reproject(
rst_arr,
output_arr,
src_transform=rst.affine,
src_crs=epsg3338,
src_nodata=rst.nodata,
dst_transform=template_raster_mask.affine,
dst_crs=epsg3338,
dst_nodata=rst.nodata,
resampling=RESAMPLING.cubic_spline,
) # , num_threads=2
# # get indexes of non-masked values
# ind = np.where( output_arr >= 0 )
# if 'pr_' in fn:
# # truncate the values to 0 decimal places
# new_vals = np.ceil( output_arr[ ind ] )
# elif 'tas_' in fn:
# # round to 2 decimal places
# new_vals = np.round( output_arr[ ind ], 2 )
# else:
# AttributeError( 'tool only built to work with tas / pr at this time.' )
# # pass the prepped values to the output_arr
# output_arr[ ind ] = new_vals
with rasterio.open(output_filename, "w", **template_meta) as out:
output_arr[template_arr == 0] = rst.nodata
out.write(output_arr, 1)
return output_filename
def project_raster(src_raster, dst_raster, dst_crs,
resampling=1, resolution=None, num_threads=2):
"""Reproject a raster from one coordinate system to another using Rasterio
code from: https://github.com/mapbox/rasterio/blob/master/docs/reproject.rst
Parameters
----------
src_raster : str
Filename of source raster.
dst_raster : str
Filename of reprojected (destination) raster.
dst_crs : str
Coordinate system of reprojected raster.
Examples:
'EPSG:26715'
resampling : int (see rasterio source code: https://github.com/mapbox/rasterio/blob/master/rasterio/enums.py)
nearest = 0
bilinear = 1
cubic = 2
cubic_spline = 3
lanczos = 4
average = 5
mode = 6
gauss = 7
max = 8
min = 9
med = 10
q1 = 11
q3 = 12
resolution : tuple of floats (len 2)
cell size of the output raster
(x resolution, y resolution)
"""
rasterio = import_rasterio() # check for rasterio
from rasterio.warp import calculate_default_transform, reproject
with rasterio.open(src_raster) as src:
affine, width, height = calculate_default_transform(
src.crs, dst_crs, src.width, src.height, *src.bounds, resolution=resolution)
kwargs = src.meta.copy()
kwargs.update({
'crs': dst_crs,
'transform': affine,
'affine': affine,
'width': width,
'height': height
})
with rasterio.open(dst_raster, 'w', **kwargs) as dst:
for i in range(1, src.count + 1):
reproject(
source=rasterio.band(src, i),
destination=rasterio.band(dst, i),
src_transform=src.affine,
src_crs=src.crs,
dst_transform=affine,
dst_crs=dst_crs,
resampling=resampling,
num_threads=num_threads)
def resample_to_1km( x, template_raster_mask ):
'''
template_raster_mask should be a mask in in the res/extent/origin/crs of the
existing TEM IEM products.
'''
import rasterio, os
from rasterio.warp import RESAMPLING, reproject
import numpy as np
fn = os.path.basename( x )
fn_split = fn.split( '.' )[0].split( '_' )
if '_cru_' in fn:
output_path = os.path.dirname( x ).replace( '/cru_ts31/', '/IEM/cru_ts31/' ) # hardwired!
fn_parts = ['variable', 'metric', 'model_1', 'model_2', 'kind', 'month', 'year']
fn_dict = dict( zip( fn_parts, fn_split ) )
fn_dict.update( scenario='historical', model='cru_ts31' )
else:
output_path = os.path.dirname( x ).replace( '/ar5/', '/IEM/ar5/' ) # hardwired!
fn_parts = ['variable', 'metric', 'model', 'scenario', 'ensemble', 'month', 'year']
fn_dict = dict( zip( fn_parts, fn_split ) )
try:
if not os.path.exists( output_path ):
os.makedirs( output_path )
except:
pass
fn_switch = { 'cld':'_'.join([ 'cld','mean','pct','iem',fn_dict['model'],fn_dict['scenario'],fn_dict['month'], fn_dict['year'] ]) + '.tif',
'vap':'_'.join(['vap','mean','hPa','iem', fn_dict['model'],fn_dict['scenario'],fn_dict['month'], fn_dict['year'] ]) + '.tif',
'tas':'_'.join(['tas','mean','C','iem',fn_dict['model'],fn_dict['scenario'],fn_dict['month'], fn_dict['year'] ]) + '.tif',
'hur':'_'.join(['hur','mean','pct','iem',fn_dict['model'],fn_dict['scenario'],fn_dict['month'], fn_dict['year'] ]) + '.tif' }
output_filename = os.path.join( output_path, fn_switch[ fn_dict[ 'variable' ] ] )
rst = rasterio.open( x )
rst_arr = rst.read( 1 )
template_arr = template_raster_mask.read( 1 )
template_meta = template_raster_mask.meta
template_meta.update( compress='lzw', nodata=rst.nodata )
if 'transform' in template_meta.keys():
template_meta.pop( 'transform' )
output_arr = np.empty_like( template_arr.astype( np.float32 ) )
output_arr[ template_arr == 0 ] = rst.nodata
src_crs = {'init':'epsg:3338'}
dst_crs = {'init':'epsg:3338'}
reproject( rst_arr, output_arr, src_transform=rst.affine, src_crs=src_crs, src_nodata=rst.nodata, \
dst_transform=template_raster_mask.affine, dst_crs=dst_crs,\
dst_nodata=rst.nodata, resampling=RESAMPLING.cubic_spline, num_threads=2 )
with rasterio.open( output_filename, 'w', **template_meta ) as out:
output_arr[ template_arr == 0 ] = rst.nodata
out.write( output_arr, 1 )
return output_filename
def test_reproject_dst_crs_none():
with pytest.raises(CRSError):
reproject(
np.ones((2, 2)),
np.zeros((2, 2)),
src_transform=Affine.identity(),
dst_transform=Affine.identity(),
src_crs=WGS84_crs,
)
def main(red, green, blue, pan, weight,out):
weight = float(weight)
r, g, b, p = (rio.open(f) for f in [red, green, blue, pan])
rgb_o = (r, g, b)
color_meta, pan_meta = b.meta, p.meta
w, h = pan_meta['width'], pan_meta['height']
print(w, h)
pan_meta.update(photometric='rgb', count=3)
with rio.open(out, 'w', **pan_meta) as dest:
for wind in make_windows(w, h):
# print(wind, half_window(wind))
pan = p.read_band(1, window=wind).astype(matht)
print 'pan after', pan.shape
rgb = list(x.read_band(1, window=half_window(wind)).astype(matht) for x in rgb_o)
for i, c in enumerate(rgb):
x = np.empty(pan.shape)
reproject(
c, x,
src_transform=color_meta['transform'],
src_crs=color_meta['crs'],
dst_transform=pan_meta['transform'],
dst_crs=pan_meta['crs'],
resampling=RESAMPLING.bilinear)
rgb[i] = x
sudo_pan = (rgb[0] + rgb[1] + rgb[2]*weight)/(2+weight)
print weight
print 'RESAMPLING.bilinear'
# # print 'pan min',np.nanmin(pan)
# # print 'pan max', np.nanmax(pan)
# # print 'pan mean', np.mean(pan)
# # print 'sudo min',np.nanmin(sudo_pan)
# # print 'sudo max', np.nanmax(sudo_pan)
# # print 'sudo mean', np.mean(sudo_pan)
ratio = pan / sudo_pan
print sudo_pan.shape
print ratio.shape
print pan.shape
# # print 'ratio min',np.nanmin(ratio)
# # print 'ratio max', np.nanmax(ratio)
# # print 'ratio mean', np.mean(ratio) # ratio .9 to 1.1
# for i, data in enumerate(rgb):
# done = (data * ratio).astype(np.uint16)
# print(np.amax(done)) # for debugging, whether overflow. typically 40%, 30k
# # print(done.shape)
# # print(wind, w, h)
# # print done[0]
# dest.write_band(i+1, done, window=wind)
print('that was cool and fun')
def process_chunk_task(task):
"""
Chunks the image into tile_dim x tile_dim tiles,
and saves them to the target folder (s3 or local)
Returns the extent of the output raster.
"""
creation_options = {
"driver": "GTiff",
"crs": "EPSG:3857",
"tiled": True,
"compress": "deflate",
"predictor": 2, # 3 for floats, 2 otherwise
"sparse_ok": True
}
with rasterio.open(task.source_uri, "r") as src:
meta = src.meta.copy()
meta.update(creation_options)
meta.update(task.target_meta)
cols = meta["width"]
rows = meta["height"]
tmp_path = "/vsimem/" + get_filename(task.target)
with rasterio.open(tmp_path, "w", **meta) as tmp:
# Reproject the src dataset into image tile.
warped = []
for bidx in src.indexes:
source = rasterio.band(src, bidx)
warped.append(numpy.zeros((cols, rows), dtype=meta['dtype']))
warp.reproject(
source=source,
src_nodata=0,
destination=warped[bidx - 1],
dst_transform=meta["transform"],
dst_crs=meta["crs"],
# resampling=RESAMPLING.bilinear
)
# check for chunks containing only zero values
if not any(map(lambda b: b.any(), warped)):
return False
# write out our warped data to the vsimem raster
for bidx in src.indexes:
tmp.write_band(bidx, warped[bidx - 1])
contents = bytearray(virtual_file_to_buffer(tmp_path))
write_bytes_to_target(task.target, contents)
return True
def resample_to_1km( x ):
'''
template_raster_mask should be a mask in in the res/extent/origin/crs of the
existing TEM IEM products.
'''
fn, output_filename, template_raster_mask_fn = x
import rasterio, os
from rasterio.warp import RESAMPLING, reproject
import numpy as np
rst = rasterio.open( fn )
rst_arr = rst.read( 1 )
fn = os.path.basename( fn )
fn_split = fn.split( '.' )[0].split( '_' )
template_raster_mask = rasterio.open( template_raster_mask_fn )
template_arr = template_raster_mask.read( 1 )
template_meta = template_raster_mask.meta
template_meta.update( compress='lzw', nodata=rst.nodata, dtype='float32' )
if 'transform' in template_meta.keys():
template_meta.pop( 'transform' )
output_arr = np.empty_like( template_arr.astype( np.float32 ) )
output_arr[ template_arr == 0 ] = rst.nodata
epsg3338 = {'init':'epsg:3338'}
reproject( rst_arr, output_arr, src_transform=rst.affine, src_crs=epsg3338, src_nodata=rst.nodata, \
dst_transform=template_raster_mask.affine, dst_crs=epsg3338,\
dst_nodata=rst.nodata, resampling=RESAMPLING.cubic_spline ) # , num_threads=2
# REQUIRES UPDATING!
# this is where we would need to truncate the data to 2 decimal places for the tas
# and we need have a dtype diff I think for pr = int32 and tas = float32
# this needs to match the AR4 data! check the CKAN_Data data.
# get indexes of non-masked values
ind = np.where( output_arr >= 0 )
if 'pr_' in fn:
# truncate the values to 0 decimal places
new_vals = np.ceil( output_arr[ ind ] )
elif 'tas_' in fn:
# round to 2 decimal places
new_vals = np.round( output_arr[ ind ], 2 )
else:
AttributeError( 'tool only built to work with tas / pr at this time.' )
# pass the prepped values to the output_arr
output_arr[ ind ] = new_vals
with rasterio.open( output_filename, 'w', **template_meta ) as out:
output_arr[ template_arr == 0 ] = rst.nodata
out.write( output_arr, 1 )
return output_filename
def test_reproject_dst_nodata_default(options, expected):
"""If nodata is not provided, destination will be filled with 0."""
params = default_reproject_params()
with rasterio.Env(**options):
source = np.ones((params.width, params.height), dtype=np.uint8)
out = np.zeros((params.dst_width, params.dst_height),
dtype=source.dtype)
out.fill(120) # Fill with arbitrary value
reproject(source,
out,
src_transform=params.src_transform,
src_crs=params.src_crs,
dst_transform=params.dst_transform,
dst_crs=params.dst_crs)
assert (out == 1).sum() == expected
assert (out == 0).sum() == (params.dst_width * params.dst_height -
expected)
def test_reproject_dst_alpha(path_rgb_msk_byte_tif):
"""Materialization of external mask succeeds"""
with rasterio.open(path_rgb_msk_byte_tif) as src:
nrows, ncols = src.shape
dst_arr = np.zeros((src.count + 1, nrows, ncols), dtype=np.uint8)
reproject(
rasterio.band(src, src.indexes),
dst_arr,
src_transform=src.transform,
src_crs=src.crs,
dst_transform=DST_TRANSFORM,
dst_crs={"init": "epsg:3857"},
dst_alpha=4,
)
assert dst_arr[3].any()
def test_reproject_out_of_bounds():
"""Using EPSG code is not appropriate for the transform.
Should return blank image.
"""
with rasterio.open("tests/data/RGB.byte.tif") as src:
source = src.read(1)
dst_crs = {"init": "epsg:32619"}
out = np.zeros(src.shape, dtype=np.uint8)
reproject(
source,
out,
src_transform=src.transform,
src_crs=src.crs,
dst_transform=DST_TRANSFORM,
dst_crs=dst_crs,
resampling=Resampling.nearest,
)
assert not out.any()
def read_sentinel2_data(self, input_file, params):
print("read_sentinel2_data", input_file)
input_dir = os.path.join(input_file, "GRANULE")
sub_directories = utils.get_immediate_subdirectories(input_dir)
image_dir = os.path.join(input_dir, sub_directories[0], "IMG_DATA")
input_bands = params['bands']
# input_bands = ['B02', 'B03', 'B04', 'B08', # 10m
# 'B05', 'B06', 'B07', 'B8A', 'B11', 'B12', # 20m
# 'B01', 'B09', 'B10'] # 60m
num_bands = len(input_bands)
scale_factor = 10000.0 #read from metadata?
band_paths = self.get_band_paths(input_file, self.params['bands'])
for band_ind, img_filename in enumerate(band_paths):
print("Reading", img_filename)
with rasterio.open(img_filename) as ds:
img = ds.read()
if band_ind == 0: # First band need to be 10m
tmparr = np.empty_like(img)
ds10 = ds
aff10 = ds.transform
img_stack = np.zeros(
(img.shape[1], img.shape[2], num_bands))
img_stack[:, :, band_ind] = img.squeeze() / scale_factor
elif input_bands[band_ind] == "B03" or input_bands[
band_ind] == "B04" or input_bands[
band_ind] == "B08": # 10m
img_stack[:, :, band_ind] = img.squeeze() / scale_factor
else:
reproject(img,
tmparr,
src_transform=ds.transform,
dst_transform=aff10,
src_crs=ds.crs,
dst_crs=ds.crs,
resampling=Resampling.cubic_spline)
img_stack[:, :, band_ind] = tmparr.squeeze() / scale_factor
return (img_stack, ds10)
def create_ortho_mask(in_path, dst_path, dst_crs=None):
"""Create a mask on an orthophotography and write the output in the specified crs"""
# Read the input raster
with rasterio.open(in_path) as src:
r, g, b, a = src.read()
profile = src.profile
bounds = src.bounds
# Build the mask
tot = r + g + b
tot[tot > 200] = 255
tot[tot <= 200] = 0
# There is only one band in the output
profile["count"] = 1
# If dst_crs is define, we transform the raster to the destination crs
if dst_crs:
# Calculate the ideal dimensions and transformation in the new crs
dst_affine, dst_width, dst_height = calculate_default_transform(
profile["crs"], dst_crs, profile["width"], profile["height"], *bounds)
# Update the profile
profile['crs'] = dst_crs
profile['transform'] = dst_affine
profile['affine'] = dst_affine
profile['width'] = dst_width
profile['height'] = dst_height
# Reproject with the default resampling method
reproject(
source=tot,
src_crs=profile["crs"],
src_transform=profile["affine"],
destination=tot,
dst_transform=dst_affine,
dst_crs=dst_crs)
# Write the output raster
with rasterio.open(dst_path, "w", **profile) as dest:
dest.write(tot, 1)
def dt_whole_year(year):
population_file_path = POP_DATA_SRC / 'nasa_grid' / 'count' / f'population_{year}_quartres.tif'
nasa_giss = xr.open_dataset(str(nasa_giss_anom))
t_anomaly = nasa_giss.sel(time=f'{year}').air.mean(
dim='time').values.astype('float32')
with rasterio.open(str(population_file_path)) as pop:
print(pop.meta)
pop_meta = pop.meta
pop_trns = pop.transform
population = pop.read(1)
common_crs = pop_meta['crs']
newarr = np.empty(shape=population.shape)
print('Reprojecting')
reproject(t_anomaly,
newarr,
src_transform=nasa_trns,
dst_transform=pop_trns,
src_crs=common_crs,
dst_crs=common_crs,
resample=Resampling.bilinear)
indicator = population * newarr
with rasterio.open(str(DATA_SRC / 'lancet' /
f'nasa_dt_indicator_{year}.tif'),
'w',
driver='GTiff',
height=indicator.shape[0],
width=indicator.shape[1],
count=1,
dtype=indicator.dtype,
crs=common_crs,
transform=pop_trns,
compress='lzw') as new_dataset:
new_dataset.write(indicator, 1)
def reproject(self, dst_crs, fp=None, interpolation='nearest'):
if dst_crs == 'utm':
dst_crs = get_utm_zone(self.crs, self.transform,
(self.height, self.width))
# get temporary filepath if such is not provided
tmp_file = False if fp is not None else True
if fp is None:
fp = '{tmp}/reprojected_{crs}/{directory}/{name}.tif'.format(
tmp=TMP_DIR,
crs=dst_crs,
directory=random_name(),
name=self.name)
os.makedirs(os.path.dirname(fp), exist_ok=True)
# calculate params of new reprojected Band
transform, width, height = calculate_default_transform(
self.crs, dst_crs, self.width, self.height, *self.bounds)
kwargs = self.meta.copy()
kwargs.update({
'crs': dst_crs,
'transform': transform,
'width': width,
'height': height
})
# reproject
with rasterio.open(fp, 'w', **kwargs) as dst:
reproject(source=rasterio.band(self._band, 1),
destination=rasterio.band(dst, 1),
src_transform=self.transform,
src_crs=self.crs,
dst_transform=transform,
dst_crs=dst_crs,
resampling=getattr(Resampling, interpolation))
# new band
band = Band(fp)
band._tmp_file = tmp_file # file will be automatically removed when `Band` instance will be deleted
return band
def calc_difference(ndvi_tile1, ndvi_tile2, output):
"""This function calculates the difference of two rasters
Parameter: Two ndvi calculated rasters, output raster"""
#open dataset and get Affine transformation and bounding properties
with rio.open(ndvi1) as src1:
meta = src1.meta.copy()
transform = src1.meta["transform"]
x = meta['width']
y = meta['height']
band1 = src1.read()
#open dataset
with rio.open(ndvi2) as src2:
#read the band as ndarray with the same dimension of src1
band2 = src2.read(out_shape=(src1.height, src1.width),
resampling=rio.enums.Resampling.bilinear)
#create destination for reprojection of src2
dst_crs = {'init': 'EPSG:32632'}
proj_band2 = np.empty(src1.shape, dtype=np.float32)
#reproject the src2 to match src1
warp.reproject(band2,
destination=proj_band2,
src_transform=src2.transform,
src_crs=src2.crs,
dst_transform=transform,
dst_crs=dst_crs)
#calculate difference between reprojected band2 and band1
difference = np.subtract(proj_band2, band1)
#create outfile
outfile = output
#write outfile with the properties and resolution of src1
with rio.open(outfile, 'w', **meta) as dst:
dst.write(difference,
window=rio.windows.Window(col_off=0,
row_off=0,
width=x,
height=y))
return outfile
def test_reproject_view():
"""Source views are reprojected properly"""
with rasterio.open("tests/data/RGB.byte.tif") as src:
source = src.read(1)
window = windows.Window(100, 100, 500, 500)
# window = windows.get_data_window(source)
reduced_array = source[window.toslices()]
reduced_transform = windows.transform(window, src.transform)
# Assert that we're working with a view.
assert reduced_array.base is source
dst_crs = dict(
proj="merc",
a=6378137,
b=6378137,
lat_ts=0.0,
lon_0=0.0,
x_0=0.0,
y_0=0,
k=1.0,
units="m",
nadgrids="@null",
wktext=True,
no_defs=True,
)
out = np.empty(src.shape, dtype=np.uint8)
reproject(
reduced_array,
out,
src_transform=reduced_transform,
src_crs=src.crs,
dst_transform=DST_TRANSFORM,
dst_crs=dst_crs,
resampling=Resampling.nearest,
)
assert (out > 0).sum() == 299199
def reproject_raster(inpath, outpath, new_crs):
"""
Reproject/define projection of studyregion raster
Parameters
----------
inpath : string
filepath of input raster image
outpath : string
filepath to save output raster
new_crs : dict
new projected crs
Returns
-------
output raster
"""
# CRS for web meractor
dst_crs = new_crs
with rasterio.open(inpath) as src:
transform, width, height = calculate_default_transform(
src.crs, dst_crs, src.width, src.height, *src.bounds)
kwargs = src.meta.copy()
kwargs.update({
'crs': dst_crs,
'transform': transform,
'width': width,
'height': height
})
with rasterio.open(outpath, 'w', **kwargs) as dst:
for i in range(1, src.count + 1):
reproject(source=rasterio.band(src, i),
destination=rasterio.band(dst, i),
src_transform=src.transform,
src_crs=src.crs,
dst_transform=transform,
dst_crs=dst_crs,
resampling=Resampling.nearest)
raster_proj = rasterio.open(outpath)
return raster_proj
def rescale(root, name, template="hand.tif"):
'''
Rescale a raster based on the
:param root: root directory
:param name: name of raster to be rescaled
:param template: Name of file used for rescale template. Defaults to Hand in the output folder.
:return: none
'''
with rasterio.open(os.path.join(root, template)) as mask_file:
# with rasterio.open(os.path.join(root, 'demfill.tif')) as mask2:
shape = [{
'type':
'Polygon',
'coordinates': [[(mask_file.bounds.left, mask_file.bounds.top),
(mask_file.bounds.left, mask_file.bounds.bottom),
(mask_file.bounds.right, mask_file.bounds.bottom),
(mask_file.bounds.right, mask_file.bounds.top)]]
}]
with rasterio.open(os.path.join(root, "temp.tif")) as src:
# resample_raster(src, upscale_factor, huc, name)
transform, width, height = calculate_default_transform(
src.crs, mask_file.crs, mask_file.width, mask_file.height,
*mask_file.bounds)
kwargs = src.meta.copy()
kwargs.update({
'crs': mask_file.crs,
'transform': transform,
'width': width,
'height': height,
})
with rasterio.open(os.path.join(root, name), 'w', **kwargs) as dst:
for i in range(1, src.count + 1):
reproject(source=rasterio.band(src, i),
destination=rasterio.band(dst, i),
src_transform=src.transform,
src_crs=src.crs,
dst_transform=transform,
dst_crs=mask_file.crs,
resampling=Resampling.bilinear)
return None
def reprojectA(id):
dst_crs = 'EPSG:4326'
with rasterio.open(id + '.tif') as src:
transform, width, height = calculate_default_transform(
src.crs, dst_crs, src.width, src.height, *src.bounds)
kwargs = src.meta.copy()
kwargs.update({
'crs': dst_crs,
'transform': transform,
'width': width,
'height': height
})
with rasterio.open('reprojected.tif', 'w', **kwargs) as dst:
for i in range(1, src.count + 1):
reproject(source=rasterio.band(src, i),
destination=rasterio.band(dst, i),
src_transform=src.transform,
src_crs=src.crs,
dst_transform=transform,
dst_crs=dst_crs,
resampling=Resampling.nearest)
def render_image(renderer, data, filename, scale=1, reproject_kwargs=None):
if reproject_kwargs is not None:
with rasterio.drivers():
out = numpy.empty(shape=reproject_kwargs['dst_shape'],
dtype=data.dtype)
out.fill(data.fill_value)
reproject(data, out, **reproject_kwargs)
# Reapply mask
data = numpy.ma.masked_array(out, mask=out == data.fill_value)
resampling = ANTIALIAS
if renderer.name == 'unique':
resampling = NEAREST
img = renderer.render_image(data)
if scale != 1:
img = img.resize(
(numpy.array(data.shape[::-1]) * scale).astype(numpy.uint),
resampling)
img.save(filename)
def test_reproject_nodata_nan():
params = default_reproject_params()
with rasterio.Env():
source = np.ones((params.width, params.height), dtype=np.float32)
out = np.zeros((params.dst_width, params.dst_height),
dtype=source.dtype)
out.fill(120) # Fill with arbitrary value
reproject(source,
out,
src_transform=params.src_transform,
src_crs=params.src_crs,
src_nodata=np.nan,
dst_transform=params.dst_transform,
dst_crs=params.dst_crs,
dst_nodata=np.nan)
assert (out == 1).sum() == 6215
assert np.isnan(out).sum() == (params.dst_width * params.dst_height -
6215)
def reproject_raster(raster_path, dst_crs, outpul_file):
with rasterio.open(raster_path) as src:
transform, width, height = calculate_default_transform(
src.crs, dst_crs, src.width, src.height, *src.bounds)
kwargs = src.meta.copy()
kwargs.update({
'crs': dst_crs,
'transform': transform,
'width': width,
'height': height
})
with rasterio.open(outpul_file, 'w', **kwargs) as dst:
for i in range(1, src.count + 1):
reproject(source=rasterio.band(src, i),
destination=rasterio.band(dst, i),
src_transform=src.transform,
src_crs=src.crs,
dst_transform=transform,
dst_crs=dst_crs,
resampling=Resampling.nearest)
def interpolate_clouds_to_10m(file_clouds):
print('interpolate_clouds_to_10m:\n')
print('Open files, reserve memory:\n')
dataset_clouds = rio.open(file_clouds)
clouds = dataset_clouds.read(1)
clouds10 = np.empty(shape=(int(round(clouds.shape[0] * 2)),
int(round(clouds.shape[1] * 2))))
print('define transformation:\n')
aff = dataset_clouds.transform
newaff = Affine(aff[0] / 2, aff[1], aff[2], aff[3], aff[4] / 2, aff[5])
print('Reproject: \n')
reproject(clouds,
clouds10,
src_transform=aff,
dst_transform=newaff,
src_crs=dataset_clouds.crs,
dst_crs=dataset_clouds.crs,
resampling=Resampling.nearest)
return (clouds10)
def test_reproject_dst_nodata():
"""Affirm resolution of issue #1395"""
with rasterio.open('tests/data/RGB.byte.tif') as src:
source = src.read(1)
dst_crs = {'init': 'EPSG:3857'}
out = np.empty(src.shape, dtype=np.float32)
reproject(
source,
out,
src_transform=src.transform,
src_crs=src.crs,
dst_transform=DST_TRANSFORM,
dst_crs=dst_crs,
src_nodata=0,
dst_nodata=np.nan,
resampling=Resampling.nearest)
assert (out > 0).sum() == 438113
assert out[0, 0] != 0
assert np.isnan(out[0, 0])
def _reproject(self, eopatch, src_raster):
"""
Reprojects the raster data from Geopedia's CRS (POP_WEB) to EOPatch's CRS.
"""
height, width = src_raster.shape
dst_raster = np.ones((height, width), dtype=self.raster_dtype)
src_bbox = transform_bbox(eopatch.bbox, CRS.POP_WEB)
src_transform = transform.from_bounds(*src_bbox, width=width, height=height)
dst_bbox = eopatch.bbox
dst_transform = transform.from_bounds(*dst_bbox, width=width, height=height)
warp.reproject(src_raster, dst_raster,
src_transform=src_transform, src_crs={'init': CRS.ogc_string(CRS.POP_WEB)},
src_nodata=0,
dst_transform=dst_transform, dst_crs={'init': CRS.ogc_string(eopatch.bbox.crs)},
dst_nodata=self.no_data_val)
return dst_raster
def SetCRSRes(srcpath, dstpath, dst_crs, dst_transform, dst_width, dst_height):
with rasterio.open(srcpath) as src:
transform, width, height = calculate_default_transform(
src.crs, dst_crs, src.width, src.height, *src.bounds)
kwargs = src.meta.copy()
kwargs.update({
'crs': dst_crs,
'transform': dst_transform,
'width': dst_width,
'height': dst_height
})
with rasterio.open(dstpath, 'w', **kwargs) as dst:
for i in range(1, src.count + 1):
reproject(source=rasterio.band(src, i),
destination=rasterio.band(dst, i),
src_transform=src.affine,
src_crs=src.crs,
dst_transform=dst_transform,
dst_crs=dst_crs,
resampling=Resampling.nearest)
def test_reproject_nodata_nan(options, expected):
with rasterio.Env(**options):
params = uninvertable_reproject_params()
source = np.ones((params.width, params.height), dtype=np.float32)
out = np.zeros((params.dst_width, params.dst_height), dtype=source.dtype)
out.fill(120) # Fill with arbitrary value
reproject(
source,
out,
src_transform=params.src_transform,
src_crs=params.src_crs,
src_nodata=np.nan,
dst_transform=params.dst_transform,
dst_crs=params.dst_crs,
dst_nodata=np.nan,
)
assert (out == 1).sum() == expected
assert np.isnan(out).sum() == (params.dst_width * params.dst_height - expected)
def test_warp_from_to_file(tmpdir):
"""File to file."""
tiffname = str(tmpdir.join('foo.tif'))
with rasterio.open('tests/data/RGB.byte.tif') as src:
dst_crs = dict(proj='merc',
a=6378137,
b=6378137,
lat_ts=0.0,
lon_0=0.0,
x_0=0.0,
y_0=0,
k=1.0,
units='m',
nadgrids='@null',
wktext=True,
no_defs=True)
kwargs = src.meta.copy()
kwargs.update(transform=DST_TRANSFORM, crs=dst_crs)
with rasterio.open(tiffname, 'w', **kwargs) as dst:
for i in (1, 2, 3):
reproject(rasterio.band(src, i), rasterio.band(dst, i))
def test_reproject_identity_src():
"""Reproject with an identity like source matrices."""
src = np.random.random(25).reshape((1, 5, 5))
dst = np.empty(shape=(1, 10, 10))
dstaff = Affine(0.5, 0.0, 0.0, 0.0, 0.5, 0.0)
crs = {'init': 'epsg:3857'}
src_affines = [
Affine(1.0, 0.0, 0.0, 0.0, 1.0, 0.0), # Identity both positive
Affine(1.0, 0.0, 0.0, 0.0, -1.0, 0.0), # Identity with negative e
]
for srcaff in src_affines:
# reproject expected to not raise any error in any of the srcaff
reproject(src,
dst,
src_transform=srcaff,
src_crs=crs,
dst_transform=dstaff,
dst_crs=crs,
resampling=Resampling.nearest)
def test_warp_from_file():
"""File to ndarray."""
with rasterio.open('tests/data/RGB.byte.tif') as src:
dst_crs = dict(proj='merc',
a=6378137,
b=6378137,
lat_ts=0.0,
lon_0=0.0,
x_0=0.0,
y_0=0,
k=1.0,
units='m',
nadgrids='@null',
wktext=True,
no_defs=True)
destin = np.empty(src.shape, dtype=np.uint8)
reproject(rasterio.band(src, 1),
destin,
dst_transform=DST_TRANSFORM,
dst_crs=dst_crs)
assert destin.any()
def reprojected_by_rio( src : str, dst : str, dst_crs : int = 4326 ) -> None:
""" Reproject raster with rasterio """
# Get src dataset
src_dataset = rio.open(src, 'r')
# get crs
src_crs = src_dataset.crs
dst_crs = 'EPSG:%d' % dst_crs
# get src width x height
src_width = src_dataset.width
src_height = src_dataset.height
# get src bounds
src_bounds = src_dataset.bounds
# get transform
src_transform = src_dataset.transform
dst_transform, dst_width, dst_height = calculate_default_transform(src_crs, dst_crs, src_width, src_height, *src_bounds)
# get profile
src_profile = src_dataset.profile
dst_profile = src_profile.copy()
dst_profile.update(crs=dst_crs, width=dst_width, height=dst_height, transform=dst_transform)
# make reprojection
with rio.open(dst, 'w', **dst_profile) as dst_dataset:
for i in range(1, src_dataset.count+1):
reproject(
source=rio.band(src_dataset, i),
destination=rio.band(dst_dataset, i),
src_transform=src_transform,
dst_transform=dst_transform,
src_crs=src_crs,
dst_crs=dst_crs
)
def raster_resample(raster_name, save_as_filename, epsg, upscale_factor):
"""
raster resampling code to reduce or increase the no.of pixels in a given
raster. Upscale factor determines whether it is upscaled or downscaled.
Upscale has lesser cell size and downscale has higher cell size.
:param raster_name: raster filename
:param save_as_filename: save as file name
:param epsg: epsg code for reprojection
:param upscale_factor: the factor for upscaling or downscaling
:return: None
"""
try:
with rasterio.open(raster_name) as dem:
dst_crs = 'EPSG:' + str(epsg)
data = dem.read(out_shape=(dem.count,
int(dem.height * upscale_factor),
int(dem.width * upscale_factor)),
resampling=Resampling.bilinear)
transform = dem.transform * dem.transform.scale(
(dem.width / data.shape[-1]), (dem.height / data.shape[-2]))
kwargs = dem.meta.copy()
kwargs.update({
'crs': dem.crs,
'transform': transform,
'width': dem.width * upscale_factor,
'height': dem.height * upscale_factor
})
with rasterio.open(save_as_filename, 'w', **kwargs) as dst:
for i in range(1, dem.count + 1):
reproject(source=rasterio.band(dem, i),
destination=rasterio.band(dst, i),
src_transform=dem.transform,
src_crs=dem.crs,
dst_crs=dst_crs,
dst_transform=transform,
resampling=Resampling.bilinear)
except IOError:
print('Error in opening the raster, check for location/availability')
def test_resample_default_invert_proj(method):
"""Nearest and bilinear should produce valid results
with the default Env
"""
with rasterio.open("tests/data/world.rgb.tif") as src:
source = src.read(1)
profile = src.profile
dst_crs = "EPSG:32619"
# Calculate the ideal dimensions and transformation in the new crs
dst_affine, dst_width, dst_height = calculate_default_transform(
src.crs, dst_crs, src.width, src.height, *src.bounds
)
profile["height"] = dst_height
profile["width"] = dst_width
out = np.empty(shape=(dst_height, dst_width), dtype=np.uint8)
# GDAL 1.11 needs to have this config option set on to match the
# default results in later versions.
if gdal_version.major == 1:
options = dict(CHECK_WITH_INVERT_PROJ=True)
else:
options = {}
with rasterio.Env(**options):
reproject(
source,
out,
src_transform=src.transform,
src_crs=src.crs,
dst_transform=dst_affine,
dst_crs=dst_crs,
resampling=method,
)
assert out.mean() > 0
def sub_n_reproj(input_mat, kwargs_sub, sub_window, output_crs):
# Get the georeference and bounding parameters of subset image
# kwargs_sub = input_ds.meta.copy()
kwargs_sub.update({
'height':
sub_window.height,
'width':
sub_window.width,
'transform':
rasterio.windows.transform(sub_window, kwargs_sub['transform'])
})
# Generate subset rasterio dataset
input_ds_subset = MemoryFile().open(**kwargs_sub)
# mat_sub = input_ds.read(1, window=sub_window)
input_mat = np.expand_dims(input_mat, axis=0)
input_ds_subset.write(input_mat)
# Reproject a dataset
transform_reproj, width_reproj, height_reproj = \
calculate_default_transform(input_ds_subset.crs, output_crs,
input_ds_subset.width, input_ds_subset.height, *input_ds_subset.bounds)
kwargs_reproj = input_ds_subset.meta.copy()
kwargs_reproj.update({
'crs': output_crs,
'transform': transform_reproj,
'width': width_reproj,
'height': height_reproj
})
output_ds = MemoryFile().open(**kwargs_reproj)
reproject(source=rasterio.band(smap_sm_1km_subset, 1),
destination=rasterio.band(output_ds, 1),
src_transform=smap_sm_1km_subset.transform,
src_crs=smap_sm_1km_subset.crs,
dst_transform=transform,
dst_crs=dst_crs,
resampling=Resampling.nearest)
return output_ds
def reproject_GSWE(
GSWE_file_list,
target_crs='+proj=utm +zone=30 +ellps=WGS84 +datum=WGS84 +units=m +no_defs '
):
"""Summary
Args:
GSWE_file_list (TYPE): Description
target_crs (str, optional): Description
"""
try:
os.makedirs("./Reprojected")
except FileExistsError:
# directory already exists
pass
## Reporject GSWE exports from WGS to target_crs
for gsw in GSWE_file_list:
head, tail = os.path.split(gsw)
with rio.open(gsw) as src:
transform, width, height = calculate_default_transform(
'+proj=longlat +ellps=WGS84 +datum=WGS84 +no_defs', target_crs,
src.width, src.height, *src.bounds)
kwargs = src.meta.copy()
kwargs.update({
'crs': target_crs,
'transform': transform,
'width': width,
'height': height,
'compress': 'lzw'
})
with rio.open('./Reprojected/' + tail[0:-4] + 'UTM.tif', 'w',
**kwargs) as dst:
reproject(source=rio.band(src, 1),
destination=rio.band(dst, 1),
src_transform=src.transform,
src_crs=src.crs,
dst_transform=transform,
dst_crs=target_crs,
resampling=Resampling.nearest)
def test_resample_no_invert_proj(method):
"""Nearest and bilinear should produce valid results with
CHECK_WITH_INVERT_PROJ = False
"""
if not supported_resampling(method):
pytest.skip()
if method in (Resampling.bilinear, Resampling.cubic,
Resampling.cubic_spline, Resampling.lanczos):
pytest.xfail(
reason="Some resampling methods succeed but produce blank images. "
"See https://github.com/mapbox/rasterio/issues/614")
with rasterio.Env(CHECK_WITH_INVERT_PROJ=False):
with rasterio.open('tests/data/world.rgb.tif') as src:
source = src.read(1)
profile = src.profile.copy()
dst_crs = {'init': 'EPSG:32619'}
# Calculate the ideal dimensions and transformation in the new crs
dst_affine, dst_width, dst_height = calculate_default_transform(
src.crs, dst_crs, src.width, src.height, *src.bounds)
profile['height'] = dst_height
profile['width'] = dst_width
out = np.empty(shape=(dst_height, dst_width), dtype=np.uint8)
# see #614, some resampling methods succeed but produce blank images
out = np.empty(src.shape, dtype=np.uint8)
reproject(source,
out,
src_transform=src.transform,
src_crs=src.crs,
dst_transform=dst_affine,
dst_crs=dst_crs,
resampling=method)
assert out.mean() > 0
def _tile_worker(tile):
"""
For each tile, and given an open rasterio src, plus a`global_args` dictionary
with attributes of `base_val`, `interval`, and a `writer_func`,
warp a continous single band raster to a 512 x 512 mercator tile,
then encode this tile into RGB.
Parameters
-----------
tile: list
[x, y, z] indices of tile
Returns
--------
tile, buffer
tuple with the input tile, and a bytearray with the data encoded into
the format created in the `writer_func`
"""
x, y, z = tile
bounds = [
c for i in (mercantile.xy(*mercantile.ul(x, y + 1, z)),
mercantile.xy(*mercantile.ul(x + 1, y, z))) for c in i
]
toaffine = transform.from_bounds(*bounds + [512, 512])
out = np.empty((512, 512), dtype=src.meta['dtype'])
reproject(rasterio.band(src, 1),
out,
dst_transform=toaffine,
dst_crs="init='epsg:3857'",
resampling=RESAMPLING.bilinear)
out = data_to_rgb(out, global_args['base_val'], global_args['interval'])
return tile, global_args['writer_func'](out, global_args['kwargs'].copy(),
toaffine)