def sendrequest():
rc.ClearBitMask(0x04, 0x80) #CommIrqReg
rc.Write_MFRC522(
0x02, 0xA2) #ComIEnReg, Enable err, timeout and receive interrupt
buf = []
buf.append(0x26)
rc.Write_MFRC522(0x0D, 0x07)
# bout=rc.CalulateCRC(buf)#Calc CRC
# buf.append(bout[0])
# buf.append(bout[1])
rc.Write_MFRC522(0xA0, 0x80)
rc.Write_MFRC522(0x09, buf[0])
rc.Write_MFRC522(0x01, 0xC0)
rc.Write_MFRC522(0x0D, 0x80)
i = 0xff
while True:
n = rc.Read_MFRC522(0x04)
i = i - 1
if (i == 0 or n & 0x30):
if (i != 0):
print "card detected!!"
break
rc.Write_MFRC522(0x01, 0x00)
rc.ClearBitMask(0x0D, 0x80)
def sendrequest():
buf = []
buf.append(0x26)
rc.Write_MFRC522(0x0D, 0x07)
rc.Write_MFRC522(0x02, 00) #cancel current command execution
rc.ClearBitMask(0x04, 0x80) #CommIrqReg
rc.Write_MFRC522(0x02, 0xF7) #enable
rc.Write_MFRC522(0xA0, 0x80)
rc.Write_MFRC522(0x09, buf[0])
rc.Write_MFRC522(0x01, 0x0C)
rc.SetBitMask(0x0D, 0x80)
i = 0xff
while True:
n = rc.Read_MFRC522(0x04)
i = i - 1
if (i == 0 or n & 0x20):
break
if (i != 0): #and (Read_MFRC522(0x06) & 0x1B)==0x00
print "card detected!!"
rc.Write_MFRC522(0x01, 0x00) #or: rc.ClearBitMask(0x0D, 0x80)
import spi
import signal
import time
rc.MFRC522_Init('/dev/spidev0.0', 1000000)
#rc.Write_MFRC522(0x01, 0x10)# Power down mode: if ther is no SoftReset
##spi.openSPI('/dev/spidev0.0', 1000000)
##GPIO.setwarnings(False)
GPIO.setmode(GPIO.BOARD)
GPIO.setup(7, GPIO.IN)
GPIO.setup(8, GPIO.OUT)
GPIO.output(8, 0) #NRSTPD
print "Welcome to the MFRC522 self test example"
rc.Write_MFRC522(0x2A, 0x14) #TModeReg :2^10 + autorestart # was 0x14
rc.Write_MFRC522(0x2B, 0x00) #TPrescalerReg
rc.Write_MFRC522(0x2C, 0xFF) #reload value: 65535
rc.Write_MFRC522(0x2D, 0xFe)
rc.Write_MFRC522(0x0C, 0x40) #ControlReg: timer starts immediately
#=> wait 4.8329 sec
rc.Write_MFRC522(
0x11, 0x20) #transmitter can only be started if an RF field is generated
def sendrequest():
buf = []
buf.append(0x26)
rc.Write_MFRC522(0x0D, 0x07)
import RPi.GPIO as GPIO
import rc522Lib as rc
import signal
import time
continue_reading = True
write="Marwen"
rc.MFRC522_Init('/dev/spidev0.0', 1000000)
print "Welcome to the MFRC522 data write example"
i=0
while i<25:
rc.Write_MFRC522(0x09, 0)
i=i+1
rc.Write_MFRC522(0x01, 0x01)
#rc.Write_MFRC522(0x0A, 0x80) ##initiate the FIFOLevelReg pointer
rc.Write_MFRC522(0x36, 0x09)
rc.Write_MFRC522(0x0A, 0x80) ##initiate the FIFOLevelReg pointer
if rc.Read_MFRC522(0x05)==0x04:
print "crc finished "
rc.ClearBitMask(0x05, 0x04) #DivIrqReg
rc.Write_MFRC522(0x09, 0x00)
#rc.Write_MFRC522(0x03, 0x04)
rc.Write_MFRC522(0x01, 0x03) #enable CRC Command
i=0xff
while i<0:
n=Read_MFRC522(0x05)
continue_reading = True
# Capture SIGINT for cleanup when the script is aborted
def end_read(signal,frame):
global continue_reading
print "Ctrl+C captured, ending read."
continue_reading = False
signal.signal(signal.SIGINT, end_read) # Hook the SIGINT
rc.MFRC522_Init('/dev/spidev0.0', 1000000)
print "Welcome to the MFRC522 data read example"
print "Press Ctrl-C to stop."
# This loop keeps checking for chips. If one is near it will get the UID and authenticate
print rc.Read_MFRC522(0x01) #==0x0F :reset
rc.Write_MFRC522(0x01, 0x10)
#rc.Write_MFRC522(0x11,0x20)
while continue_reading:
# Scan for cards
(status,TagType) = rc.MFRC522_Request(0x26) #PICC_REQIDL
# If a card is found
if status == 0: #MI_OK
print "Card detected"
# Get the UID of the card
(status,uid) = rc.MFRC522_Anticoll()
#print("(uid, status): ",uid,"\t ", status)
# If we have the UID, continue
if status == 0:
print "Card read UID: %s,%s,%s,%s" % (uid[0], uid[1], uid[2], uid[3])
# This is the default key for authentication
key = [0xA0,0xA1,0xA2,0xA3,0xA4,0xA5]