def RandomPtOnSrf(srf):
if srf is None:
print "Not a surface"
return
dom_u = rs.SurfaceDomain(srf, 0)
dom_v = rs.SurfaceDomain(srf, 1)
while True:
pt_u = random.uniform(dom_u[0], dom_u[1])
pt_v = random.uniform(dom_v[0], dom_v[1])
pt = rs.EvaluateSurface(srf, pt_u, pt_v)
if rs.IsPointOnSurface(srf, pt):
return pt
def convert_to_uv_space(srf,pts):
tol = rs.UnitAbsoluteTolerance()
uv_pts = []
for pt in pts:
#need for issues in cases points lie on a seam
if not rs.IsPointOnSurface (srf, pt):
pts_dis = []
pts_dis.append((pt[0]+tol,pt[1],pt[2]))
pts_dis.append((pt[0]-tol,pt[1],pt[2]))
pts_dis.append((pt[0],pt[1]+tol,pt[2]))
pts_dis.append((pt[0],pt[1]-tol,pt[2]))
pts_dis.append((pt[0],pt[1],pt[2]+tol))
pts_dis.append((pt[0],pt[1],pt[2]-tol))
for pt_dis in pts_dis:
data= rs.BrepClosestPoint(srf,pt_dis)
if rs.IsPointOnSurface(srf,data[0]):
pt = data[0]
break
u,v = rs.SurfaceClosestPoint(srf,pt)
uv_pts.append((u,v,0))
#rs.AddTextDot(str(data[2] ) + " / " + str(rs.IsPointOnSurface (srf, pt)) + " / " + str(u) + " / " + str(v),pt)
return uv_pts
def trim(self, curve, cutter, filter=1):
resultLines = []
intersectedPoints = rs.CurveCurveIntersection(curve, cutter)
if intersectedPoints == None:
return None
tmpSurface = rs.AddPlanarSrf(cutter)
intersectedPoints = [n[1] for n in intersectedPoints]
intersectedPoints.insert(0, rs.CurveStartPoint(curve))
intersectedPoints.insert(len(intersectedPoints),
rs.CurveEndPoint(curve))
for i in range(len(intersectedPoints) - 1):
x = intersectedPoints[i][0] + intersectedPoints[i + 1][0]
y = intersectedPoints[i][1] + intersectedPoints[i + 1][1]
z = intersectedPoints[i][2] + intersectedPoints[i + 1][2]
mid = (x / 2.0, y / 2.0, z / 2.0)
if tmpSurface is None:
continue
if rs.IsPointOnSurface(tmpSurface, mid):
if filter == 1:
resultLines.append(
rs.AddLine(intersectedPoints[i],
intersectedPoints[i + 1]))
elif filter == 2:
continue
else:
if filter == 1:
continue
elif filter == 2:
resultLines.append(
rs.AddLine(intersectedPoints[i],
intersectedPoints[i + 1]))
rs.DeleteObject(curve)
if tmpSurface is not None:
rs.DeleteObject(tmpSurface)
return resultLines
def setSurfaceForSlicing(self):
explodedSurfaces = rs.ExplodePolysurfaces(self.addtiveObj)
editPoint = []
#get editPoint from polysurfaces
if len(explodedSurfaces) == 0:
#use obj
meshed = rhino.Geometry.Mesh.CreateFromBrep(
rs.coercebrep(self.addtiveObj))
editPoint = rs.MeshVertices(meshed[0])
else:
for i in explodedSurfaces:
meshed = rhino.Geometry.Mesh.CreateFromBrep(rs.coercebrep(i))
vertices = rs.MeshVertices(meshed[0])
editPoint.extend(vertices)
rs.DeleteObjects(explodedSurfaces)
minValue = []
maxValue = []
basePointForPlane = None
basePointForDistance = None
for i in range(len(editPoint)):
if i == 0:
basePointForPlane = editPoint[0]
basePointForDistance = editPoint[0]
for j in range(3):
minValue.append(editPoint[0][j])
maxValue.append(editPoint[0][j])
continue
else:
if basePointForPlane[2] > editPoint[i][2]:
basePointForPlane = editPoint[i]
if basePointForDistance[2] < editPoint[i][2]:
basePointForDistance = editPoint[i]
for j in range(3):
if minValue[j] > editPoint[i][j]:
minValue[j] = editPoint[i][j]
elif maxValue[j] < editPoint[i][j]:
maxValue[j] = editPoint[i][j]
#why?
self.basePointForPlane = basePointForPlane
plane = rs.PlaneFromNormal(basePointForPlane, self.normalVec)
#calculating distance printing
self.calcDistance(plane, editPoint)
#make base surface
pntForSur = []
line = (minValue[0], minValue[1],
minValue[2]), (minValue[0], minValue[1], maxValue[2])
pntForSur.append(rs.LinePlaneIntersection(line, plane))
line = (minValue[0], maxValue[1],
minValue[2]), (minValue[0], maxValue[1], maxValue[2])
pntForSur.append(rs.LinePlaneIntersection(line, plane))
line = (maxValue[0], maxValue[1],
minValue[2]), (maxValue[0], maxValue[1], maxValue[2])
pntForSur.append(rs.LinePlaneIntersection(line, plane))
line = (maxValue[0], minValue[1],
minValue[2]), (maxValue[0], minValue[1], maxValue[2])
pntForSur.append(rs.LinePlaneIntersection(line, plane))
lineForSur = []
for i in range(4):
lineForSur.append(rs.AddLine(pntForSur[i], pntForSur[(i + 1) % 4]))
joinedCurve = rs.JoinCurves(lineForSur)
rs.DeleteObjects(lineForSur)
curveForSur = rs.OffsetCurve(joinedCurve, rs.CurveNormal(joinedCurve),
30)
self.sliceSurface = rs.AddPlanarSrf(curveForSur)
if len(curveForSur) > 1 or rs.IsPointOnSurface(
self.sliceSurface, rs.CurveStartPoint(joinedCurve)) is False:
rs.DeleteObjects(curveForSur)
if self.sliceSurface is not None:
rs.DeleteObject(self.sliceSurface)
curveForSur = rs.OffsetCurve(joinedCurve,
rs.CurveNormal(joinedCurve), -30)
self.sliceSurface = rs.AddPlanarSrf(curveForSur)
rs.DeleteObjects(joinedCurve)
rs.DeleteObjects(curveForSur)
self.fixedLayerHeight = float(
self.gcoder.getLayerHeight() *
(1.0 / math.cos(math.radians(self.angleOfSurface))))
self.addtiveObj = rs.CopyObject(self.addtiveObj,
(0, 0, self.fixedLayerHeight * 0.9))
self.sliceSurface = rs.MoveObject(self.sliceSurface,
(0, 0, self.fixedLayerHeight * 0.9))
def apply_constraints(k, args):
"""Apply the constraints on the vertices of the mesh on a point, a curve or a surface.
Parameters
----------
mesh : Mesh
A mesh.
constraints : dict
A dictionary with constraints on mesh vertices: {vertex_key: (constraint_type, constraint_information)}.
Returns
-------
Raises
------
-
"""
mesh, constraints = args
for vkey, constraint in constraints.items():
cstr_type, cstr_object = constraint
if cstr_type == 'point':
x, y, z = cstr_object
attr = mesh.vertex[vkey]
attr['x'] = x
attr['y'] = y
attr['z'] = z
elif cstr_type == 'curve':
xyz = mesh.vertex_coordinates(vkey)
t = rs.CurveClosestPoint(cstr_object, xyz)
x, y, z = rs.EvaluateCurve(cstr_object, t)
attr = mesh.vertex[vkey]
attr['x'] = x
attr['y'] = y
attr['z'] = z
elif cstr_type == 'surface':
xyz = mesh.vertex_coordinates(vkey)
u, v = rs.SurfaceClosestPoint(cstr_object, xyz)
x, y, z = rs.EvaluateSurface(cstr_object, u, v)
if not rs.IsPointOnSurface(cstr_object, [x, y, z]):
borders = surface_borders(cstr_object)
xyz0 = [x, y, z]
min_dist = -1
pt = None
for border in borders:
t = rs.CurveClosestPoint(border, xyz0)
xyz = rs.EvaluateCurve(border, t)
dist = rs.Distance(xyz, xyz0)
if dist < min_dist or min_dist < 0:
min_dist = dist
pt = xyz
x, y, z = pt
rs.DeleteObjects(borders)
attr = mesh.vertex[vkey]
attr['x'] = x
attr['y'] = y
attr['z'] = z
return 0
def create_bone(point, curve, length, width, radius, extend):
if not extend: extend = 0.001
curve_surface = rs.AddPlanarSrf(curve)
if not curve_surface:
exp_curves = rs.ExplodeCurves(curve)
curve_surface = rs.AddEdgeSrf(exp_curves)
rs.DeleteObjects(exp_curves)
print("Surface problem")
# circle = rs.AddCircle(rs.CurveAreaCentroid(curve)[0],10000)
# planar_surface = rs.AddPlanarSrf(circle)
# projected_curve = rs.ProjectCurveToSurface(curve,planar_surface,(0,0,-1))
# if not projected_curve: rs.ProjectCurveToSurface(curve,planar_surface,(0,0,1))
# if not projected_curve: print "noooooo"
# curve_surface = rs.AddPlanarSrf(projected_curve)
# rs.DeleteObjects([circle,planar_surface,curve])
# curve = rs.JoinCurves(rs.DuplicateEdgeCurves(curve_surface, select=False))
# if not curve_surface: print "WARNING"
main_point_param = rs.CurveClosestPoint(curve, point)
curve_normal = rs.CurveNormal(curve)
curve_plane = rs.CurvePlane(curve)
tangent = rs.CurveTangent(curve, main_point_param)
center_curve = rs.AddLine((0, 0, 0), rs.VectorScale(tangent, length))
rs.RotateObject(center_curve, (0, 0, 0), 90, curve_normal)
rs.MoveObject(center_curve, rs.VectorCreate(point, (0, 0, 0)))
if not rs.IsPointOnSurface(curve_surface, rs.CurveEndPoint(center_curve)):
rs.RotateObject(center_curve, point, 180, curve_normal)
normal = rs.VectorScale(tangent, 10000)
normal_inverted = rs.VectorReverse(normal)
side_curve = rs.OffsetCurveOnSurface(center_curve, curve_surface,
width / 2)
if not side_curve:
side_curve = rs.OffsetCurveOnSurface(center_curve, curve_surface,
-width / 2)
side_curves = [
side_curve,
rs.RotateObject(
side_curve, rs.CurveMidPoint(center_curve), 180,
rs.VectorCreate(rs.CurveStartPoint(center_curve),
rs.CurveEndPoint(center_curve)), True)
]
#side_curves = [side_curve,rs.MirrorObject(side_curve,rs.CurveStartPoint(center_curve),rs.CurveEndPoint(center_curve), True)]
#side_curves = [rs.OffsetCurveOnSurface(center_curve,curve_surface, width/2),rs.OffsetCurveOnSurface(center_curve,curve_surface, -width/2)]
for side_curve in side_curves:
rs.ExtendCurveLength(side_curve, 0, 0, 2)
rs.ObjectColor(side_curve, (255, 0, 0))
perimeter_curve = rs.AddCurve([
rs.CurveStartPoint(side_curves[0]),
rs.CurveEndPoint(side_curves[0]),
rs.CurveEndPoint(side_curves[1]),
rs.CurveStartPoint(side_curves[1]),
rs.CurveStartPoint(side_curves[0])
], 1)
inside_curve = rs.OffsetCurve(perimeter_curve,
rs.CurveAreaCentroid(perimeter_curve)[0],
radius * .7)
external_curve = rs.OffsetCurve(perimeter_curve,
rs.CurveAreaCentroid(perimeter_curve)[0],
-extend)
e_points = [
rs.CurvePoints(external_curve)[0],
rs.CurvePoints(external_curve)[3]
]
e_perimeter_curve = rs.AddCurve([
rs.CurveEndPoint(side_curves[1]),
rs.CurveEndPoint(side_curves[0]), e_points[0], e_points[1],
rs.CurveEndPoint(side_curves[1])
], 1)
center_plane_a = rs.PlaneFromPoints(
rs.CurvePoints(inside_curve)[2],
rs.CurvePoints(inside_curve)[1],
rs.CurvePoints(inside_curve)[3])
center_plane_b = rs.PlaneFromPoints(
rs.CurvePoints(inside_curve)[1],
rs.CurvePoints(inside_curve)[0],
rs.CurvePoints(inside_curve)[2])
circles = [
rs.AddCircle(center_plane_a, radius + RADIUS_TOLERANCE),
rs.AddCircle(center_plane_b, radius + RADIUS_TOLERANCE)
]
bone_curve = rs.CurveBooleanUnion(
[e_perimeter_curve] +
circles) if extend else rs.CurveBooleanUnion([perimeter_curve] +
circles)
rs.DeleteObjects([
inside_curve, center_curve, perimeter_curve, curve_surface,
e_perimeter_curve, external_curve
] + side_curves + circles)
return bone_curve
def is_point_on_surface(id, p):
return rh.IsPointOnSurface(id, Pt(p))
def surf_f(u, v):
plane = rh.SurfaceFrame(id, (u, v))
if rh.IsPointOnSurface(id, plane.Origin):
return f(fromPlane(plane))
else:
return False