def initiate(base, extra_append, static_device=None, preserve_files=[]):
# XXX it's bad to hardcode each special case, but this is the only one I
# can think of...
if os.path.exists(ELILO_BOOT):
base_dir = os.path.join(PREFIX, ELILO_BOOT, RHN_KS_DIR, base)
else:
base_dir = os.path.join(PREFIX, BOOT, RHN_KS_DIR, base)
try:
# First, download the kickstart file.
kickstart_config = common.download_kickstart_file(extra_append)
# This hack sucks, but it works around a race condition dealing with
# the tiny url generation on the server. Basically, if we request
# the download images too soon after receiving the ks config file, we
# are served a 404. We'll remove this hack when we figure out what the
# server-side issue is.
time.sleep(5)
# Download the kernel and initrd images.
if os.path.exists(ZIPL_CONF):
pxe_dir = "images"
else:
pxe_dir = "images/pxeboot"
(kernel, initrd) = \
common.download_install_images(kickstart_config, pxe_dir,
base_dir)
except KickstartException, e:
return (15, str(e), {})
def initiate_guest(name, mem_kb, vcpus, disk_gb, extra_append,
log_notify_handler=None):
files_to_cleanup = []
# We'll wrap this up in a try block so that we can clean up should an
# exception occur.
try:
# First, download the kickstart file.
kickstart_config = common.download_kickstart_file(extra_append)
# This hack sucks, but it works around a race condition dealing with
# the tiny url generation on the server. Basically, if we request
# the download images too soon after receiving the ks config file, we
# are served a 404. We'll remove this hack when we figure out what the
# server-side issue is.
time.sleep(5)
# Download the kernel and initrd images.
(install_kernel_path, install_initrd_path) = \
common.download_install_images(kickstart_config, "images/xen",
XEN_INSTALL_IMAGE_DIR)
files_to_cleanup.append(install_kernel_path)
files_to_cleanup.append(install_initrd_path)
# Create the disk image for the instance.
disk_image_path = _create_disk_image(name, disk_gb)
files_to_cleanup.append(disk_image_path)
# Determine the type of disk image.
disk_image_type = _determine_disk_image_type(disk_image_path)
# Generate a UUID for this new instance.
uuid = _generate_uuid()
# Generate a MAC address for this new instance.
if DEBUG:
mac = DEBUG_MAC_ADDRESS
else:
mac = _generate_mac_address()
# Connect to the hypervisor.
connection = _connect_to_hypervisor()
# Now we have enough information to actually create and install the
# domain.
domain = _begin_domain_installation( \
connection,
name = name,
install_kernel_path = install_kernel_path,
install_initrd_path = install_initrd_path,
extra_append = extra_append,
mem_kb = mem_kb,
vcpus = vcpus,
uuid = uuid,
disk_image_path = disk_image_path,
disk_image_type = disk_image_type,
mac = mac)
# Wait for the domain's installation to complete. We must do this so
# that we can restart the domain with a runnable configuration.
_wait_for_domain_installation_completion(connection, domain)
_check_guest_mbr(disk_image_path)
# Write out the configuration file.
config_file_path = _create_boot_config_file( \
name = name,
mem_kb = mem_kb,
vcpus = vcpus,
uuid = uuid,
disk_image_path = disk_image_path,
disk_image_type = disk_image_type,
mac = mac)
files_to_cleanup.append(config_file_path)
# Restart the domain with the new configuration.
_boot_domain(uuid)
# The domain is now started. Finally, refresh the current
# virtualization state on the server.
# VCPUs get plugged in one at a time, querying the hypervisor state
# too soon was resulting in 1 always being returned. Sleep here
# allows the hypervisor to plug in the VCPUs and us to get the correct
# value reported back in RHN:
time.sleep(5)
virt_support.refresh()
# If we got here, we know everything went ok. We'll only remove the
# temporary installation kernel and initrd files.
files_to_cleanup = []
files_to_cleanup.append(install_kernel_path)
files_to_cleanup.append(install_initrd_path)
finally:
# If something went wrong, the logic will bounce out here before
# returning to the caller. We'll use this opportunity to clean up
# any files that we might have created so far. It would be quite rude
# to leave multi-GB sized files laying around.
for file in files_to_cleanup:
if os.path.exists(file):
os.unlink(file)
def initiate_guest(name, mem_kb, vcpus, disk_gb, extra_append,
log_notify_handler=None):
files_to_cleanup = []
# We'll wrap this up in a try block so that we can clean up should an
# exception occur.
try:
# First, download the kickstart file.
kickstart_config = common.download_kickstart_file(extra_append)
# This hack sucks, but it works around a race condition dealing with
# the tiny url generation on the server. Basically, if we request
# the download images too soon after receiving the ks config file, we
# are served a 404. We'll remove this hack when we figure out what the
# server-side issue is.
time.sleep(5)
# Download the kernel and initrd images.
(install_kernel_path, install_initrd_path) = \
common.download_install_images(kickstart_config, "images/xen",
XEN_INSTALL_IMAGE_DIR)
files_to_cleanup.append(install_kernel_path)
files_to_cleanup.append(install_initrd_path)
# Create the disk image for the instance.
disk_image_path = _create_disk_image(name, disk_gb)
files_to_cleanup.append(disk_image_path)
# Determine the type of disk image.
disk_image_type = _determine_disk_image_type(disk_image_path)
# Generate a UUID for this new instance.
uuid = _generate_uuid()
# Generate a MAC address for this new instance.
if DEBUG:
mac = DEBUG_MAC_ADDRESS
else:
mac = _generate_mac_address()
# Connect to the hypervisor.
connection = _connect_to_hypervisor()
# Now we have enough information to actually create and install the
# domain.
domain = _begin_domain_installation( \
connection,
name = name,
install_kernel_path = install_kernel_path,
install_initrd_path = install_initrd_path,
extra_append = extra_append,
mem_kb = mem_kb,
vcpus = vcpus,
uuid = uuid,
disk_image_path = disk_image_path,
disk_image_type = disk_image_type,
mac = mac)
# Wait for the domain's installation to complete. We must do this so
# that we can restart the domain with a runnable configuration.
_wait_for_domain_installation_completion(connection, domain)
_check_guest_mbr(disk_image_path)
# Write out the configuration file.
config_file_path = _create_boot_config_file( \
name = name,
mem_kb = mem_kb,
vcpus = vcpus,
uuid = uuid,
disk_image_path = disk_image_path,
disk_image_type = disk_image_type,
mac = mac)
files_to_cleanup.append(config_file_path)
# Restart the domain with the new configuration.
_boot_domain(uuid)
# The domain is now started. Finally, refresh the current
# virtualization state on the server.
# VCPUs get plugged in one at a time, querying the hypervisor state
# too soon was resulting in 1 always being returned. Sleep here
# allows the hypervisor to plug in the VCPUs and us to get the correct
# value reported back in RHN:
time.sleep(5)
virt_support.refresh()
# If we got here, we know everything went ok. We'll only remove the
# temporary installation kernel and initrd files.
files_to_cleanup = []
files_to_cleanup.append(install_kernel_path)
files_to_cleanup.append(install_initrd_path)
finally:
# If something went wrong, the logic will bounce out here before
# returning to the caller. We'll use this opportunity to clean up
# any files that we might have created so far. It would be quite rude
# to leave multi-GB sized files laying around.
for file in files_to_cleanup:
if os.path.exists(file):
os.unlink(file)
