def get_max_length(self):
pubkey = rsa.PublicKey(int(self.module, 16), int(self.empoent, 16))
key_length = int(common.bit_size(pubkey.n) / 8)
reverSize = 0 #RSA_PKCS1_PADDING填充模式
max_length = key_length - reverSize
# print(max_length)
return max_length
def encrypt_bigfile(infile, outfile, pub_key):
if not isinstance(pub_key, key.PublicKey):
raise TypeError('Public key required, but got %r' % pub_key)
key_bytes = common.bit_size(pub_key.n) // 8
blocksize = key_bytes - 11
outfile.write(byte(varblock.VARBLOCK_VERSION))
for block in varblock.yield_fixedblocks(infile, blocksize):
crypto = pkcs1.encrypt(block, pub_key)
varblock.write_varint(outfile, len(crypto))
outfile.write(crypto)
def encrypt_bigfile(infile, outfile, pub_key):
if not isinstance(pub_key, key.PublicKey):
raise TypeError('Public key required, but got %r' % pub_key)
key_bytes = common.bit_size(pub_key.n) // 8
blocksize = key_bytes - 11
outfile.write(byte(varblock.VARBLOCK_VERSION))
for block in varblock.yield_fixedblocks(infile, blocksize):
crypto = pkcs1.encrypt(block, pub_key)
varblock.write_varint(outfile, len(crypto))
outfile.write(crypto)
def block_size(n):
'''Returns the block size in bytes, given the public key.
The block size is determined by the 'n=p*q' component of the key.
'''
# Set aside 2 bits so setting of safebit won't overflow modulo n.
nbits = common.bit_size(n) - 2
nbytes = nbits // 8
return nbytes
def block_size(n):
'''Returns the block size in bytes, given the public key.
The block size is determined by the 'n=p*q' component of the key.
'''
# Set aside 2 bits so setting of safebit won't overflow modulo n.
nbits = common.bit_size(n) - 2
nbytes = nbits // 8
return nbytes
def randint(maxvalue):
bit_size = common.bit_size(maxvalue)
tries = 0
while True:
value = read_random_int(bit_size)
if value <= maxvalue:
break
if tries and tries % 10 == 0:
bit_size -= 1
tries += 1
return value
def randint(maxvalue):
bit_size = common.bit_size(maxvalue)
tries = 0
while True:
value = read_random_int(bit_size)
if value <= maxvalue:
break
if tries and tries % 10 == 0:
bit_size -= 1
tries += 1
return value
def test_negative_values(self):
self.assertEqual(bit_size(-1023), 10)
self.assertEqual(bit_size(-1024), 11)
self.assertEqual(bit_size(-1025), 11)
self.assertEqual(bit_size(-1 << 1024), 1025)
self.assertEqual(bit_size(-((1 << 1024) + 1)), 1025)
self.assertEqual(bit_size(-((1 << 1024) - 1)), 1024)
def test_values(self):
self.assertEqual(bit_size(1023), 10)
self.assertEqual(bit_size(1024), 11)
self.assertEqual(bit_size(1025), 11)
self.assertEqual(bit_size(1 << 1024), 1025)
self.assertEqual(bit_size((1 << 1024) + 1), 1025)
self.assertEqual(bit_size((1 << 1024) - 1), 1024)
def test_negative_values(self):
self.assertEqual(bit_size(-1023), 10)
self.assertEqual(bit_size(-1024), 11)
self.assertEqual(bit_size(-1025), 11)
self.assertEqual(bit_size(-1 << 1024), 1025)
self.assertEqual(bit_size(-((1 << 1024) + 1)), 1025)
self.assertEqual(bit_size(-((1 << 1024) - 1)), 1024)
def test_values(self):
self.assertEqual(bit_size(1023), 10)
self.assertEqual(bit_size(1024), 11)
self.assertEqual(bit_size(1025), 11)
self.assertEqual(bit_size(1 << 1024), 1025)
self.assertEqual(bit_size((1 << 1024) + 1), 1025)
self.assertEqual(bit_size((1 << 1024) - 1), 1024)
def encrypt_bigfile(infile, outfile, pub_key):
"""Encrypts a file, writing it to 'outfile' in VARBLOCK format.
:param infile: file-like object to read the cleartext from
:param outfile: file-like object to write the crypto in VARBLOCK format to
:param pub_key: :py:class:`rsa.PublicKey` to encrypt with
"""
if not isinstance(pub_key, key.PublicKey):
raise TypeError('Public key required, but got %r' % pub_key)
key_bytes = common.bit_size(pub_key.n) // 8
blocksize = key_bytes - 11
outfile.write(byte(varblock.VARBLOCK_VERSION))
for block in varblock.yield_fixedblocks(infile, blocksize):
crypto = pkcs1.encrypt(block, pub_key)
varblock.write_varint(outfile, len(crypto))
outfile.write(crypto)
def encrypt_bigfile(infile, outfile, pub_key):
"""Encrypts a file, writing it to 'outfile' in VARBLOCK format.
.. deprecated:: 3.4
This function was deprecated in Python-RSA version 3.4 due to security issues
in the VARBLOCK format. See the documentation_ for more information.
.. _documentation: https://stuvel.eu/python-rsa-doc/usage.html#working-with-big-files
:param infile: file-like object to read the cleartext from
:param outfile: file-like object to write the crypto in VARBLOCK format to
:param pub_key: :py:class:`rsa.PublicKey` to encrypt with
"""
warnings.warn(
"The 'rsa.bigfile.encrypt_bigfile' function was deprecated in Python-RSA version "
"3.4 due to security issues in the VARBLOCK format. See "
"https://stuvel.eu/python-rsa-doc/usage.html#working-with-big-files "
"for more information.",
DeprecationWarning,
stacklevel=2)
if not isinstance(pub_key, key.PublicKey):
raise TypeError('Public key required, but got %r' % pub_key)
key_bytes = common.bit_size(pub_key.n) // 8
blocksize = key_bytes - 11 # keep space for PKCS#1 padding
# Write the version number to the VARBLOCK file
outfile.write(byte(varblock.VARBLOCK_VERSION))
# Encrypt and write each block
for block in varblock.yield_fixedblocks(infile, blocksize):
crypto = pkcs1.encrypt(block, pub_key)
varblock.write_varint(outfile, len(crypto))
outfile.write(crypto)
def randint(maxvalue):
"""Returns a random integer x with 1 <= x <= maxvalue
May take a very long time in specific situations. If maxvalue needs N bits
to store, the closer maxvalue is to (2 ** N) - 1, the faster this function
is.
"""
bit_size = common.bit_size(maxvalue)
tries = 0
while True:
value = read_random_int(bit_size)
if value <= maxvalue:
break
if tries % 10 == 0 and tries:
# After a lot of tries to get the right number of bits but still
# smaller than maxvalue, decrease the number of bits by 1. That'll
# dramatically increase the chances to get a large enough number.
bit_size -= 1
tries += 1
return value
def randint(maxvalue):
"""Returns a random integer x with 1 <= x <= maxvalue
May take a very long time in specific situations. If maxvalue needs N bits
to store, the closer maxvalue is to (2 ** N) - 1, the faster this function
is.
"""
bit_size = common.bit_size(maxvalue)
tries = 0
while True:
value = read_random_int(bit_size)
if value <= maxvalue:
break
if tries and tries % 10 == 0:
# After a lot of tries to get the right number of bits but still
# smaller than maxvalue, decrease the number of bits by 1. That'll
# dramatically increase the chances to get a large enough number.
bit_size -= 1
tries += 1
return value
def encrypt_bigfile(infile, outfile, pub_key):
'''Encrypts a file, writing it to 'outfile' in VARBLOCK format.
:param infile: file-like object to read the cleartext from
:param outfile: file-like object to write the crypto in VARBLOCK format to
:param pub_key: :py:class:`rsa.PublicKey` to encrypt with
'''
if not isinstance(pub_key, key.PublicKey):
raise TypeError('Public key required, but got %r' % pub_key)
key_bytes = common.bit_size(pub_key.n) // 8
blocksize = key_bytes - 11 # keep space for PKCS#1 padding
# Write the version number to the VARBLOCK file
outfile.write(chr(varblock.VARBLOCK_VERSION))
# Encrypt and write each block
for block in varblock.yield_fixedblocks(infile, blocksize):
crypto = pkcs1.encrypt(block, pub_key)
varblock.write_varint(outfile, len(crypto))
outfile.write(crypto)
def encrypt_bigfile(infile, outfile, pub_key):
'''Encrypts a file, writing it to 'outfile' in VARBLOCK format.
:param infile: file-like object to read the cleartext from
:param outfile: file-like object to write the crypto in VARBLOCK format to
:param pub_key: :py:class:`rsa.PublicKey` to encrypt with
'''
if not isinstance(pub_key, key.PublicKey):
raise TypeError('Public key required, but got %r' % pub_key)
key_bytes = common.bit_size(pub_key.n) // 8
blocksize = key_bytes - 11 # keep space for PKCS#1 padding
# Write the version number to the VARBLOCK file
outfile.write(byte(varblock.VARBLOCK_VERSION))
# Encrypt and write each block
for block in varblock.yield_fixedblocks(infile, blocksize):
crypto = pkcs1.encrypt(block, pub_key)
varblock.write_varint(outfile, len(crypto))
outfile.write(crypto)
def encrypt_bigfile(infile, outfile, pub_key):
"""Encrypts a file, writing it to 'outfile' in VARBLOCK format.
.. deprecated:: 3.4
This function was deprecated in Python-RSA version 3.4 due to security issues
in the VARBLOCK format. See the documentation_ for more information.
.. _documentation: https://stuvel.eu/python-rsa-doc/usage.html#working-with-big-files
:param infile: file-like object to read the cleartext from
:param outfile: file-like object to write the crypto in VARBLOCK format to
:param pub_key: :py:class:`rsa.PublicKey` to encrypt with
"""
warnings.warn("The 'rsa.bigfile.encrypt_bigfile' function was deprecated in Python-RSA version "
"3.4 due to security issues in the VARBLOCK format. See "
"https://stuvel.eu/python-rsa-doc/usage.html#working-with-big-files "
"for more information.",
DeprecationWarning, stacklevel=2)
if not isinstance(pub_key, key.PublicKey):
raise TypeError('Public key required, but got %r' % pub_key)
key_bytes = common.bit_size(pub_key.n) // 8
blocksize = key_bytes - 11 # keep space for PKCS#1 padding
# Write the version number to the VARBLOCK file
outfile.write(byte(varblock.VARBLOCK_VERSION))
# Encrypt and write each block
for block in varblock.yield_fixedblocks(infile, blocksize):
crypto = pkcs1.encrypt(block, pub_key)
varblock.write_varint(outfile, len(crypto))
outfile.write(crypto)
def test_zero(self):
self.assertEqual(bit_size(0), 0)
def test_zero(self):
self.assertEqual(bit_size(0), 0)
