def __init__ (self, set, target, source): assert target[-4:] == '.tex' base = target[:-4] Shell.__init__(self, set, ["cweave", source, target], [target, base + ".idx", base + ".scn"], [source])
def __init__ (self, document, context):
env = document.env
if env.final.products[0][-3:] != '.ps':
msg.error(_("I can't use ps2pdf when not producing a PS"))
rubber.util.abort_generic_error ()
ps = env.final.products[0]
pdf = ps[:-2] + 'pdf'
cmd = ['ps2pdf']
cmd.extend([ps, pdf])
dep = Shell (env.depends, cmd)
dep.add_product (pdf)
dep.add_source (ps)
env.final = dep
def convert(source, target, context, set):
if target[-2:] != '_t':
# Here we assume the target has an extension of a standard form, i.e.
# its requested type can be deduced from the part of its name after
# the last dot. We also assume that this extension is the name of the
# appropriate language (it works fine in the cases where the module is
# used, that is for eps, pdf and png).
language = target[target.rfind('.') + 1:]
return Shell(set, ['fig2dev', '-L', language, source, target],
[target], [source])
else:
# Here we assume that the target has the form BASE.EXT_t, where EXT is
# eps, pdf, pstex or pdftex. In this case we call fig2dev in such a
# way that BASE.EXT_t refers to graphics file BASE and not BASE.EXT.
# This way, the source will compile independently of the engine.
the_dot = target.rfind('.')
base_name = target[:the_dot]
extension = target[the_dot + 1:]
image_reference = base_name[base_name.rfind('/') + 1:]
if 'graphics_suffixes' in context:
if '.pdf' in context['graphics_suffixes']:
language = 'pdftex'
image_file = base_name + '.pdf'
else:
language = 'pstex'
image_file = base_name + '.eps'
elif extension in ('pdftex_t', 'pdf_t'):
language = 'pdftex'
image_file = base_name + '.pdf'
else:
language = 'pstex'
image_file = base_name + '.eps'
Shell(set, ['fig2dev', '-L', language, source, image_file],
[image_file], [source])
return Shell(set, [
'fig2dev', '-L', language + '_t', '-p', image_reference, source,
target
], [target], [source, image_file])
def setup(doc, context):
env = doc.env
if env.final.products[0][-3:] != '.ps':
msg.error(_("I can't use ps2pdf when not producing a PS"))
sys.exit(2)
ps = env.final.products[0]
pdf = ps[:-2] + 'pdf'
cmd = ['ps2pdf']
for opt in doc.vars['paper'].split():
cmd.append('-sPAPERSIZE=' + opt)
cmd.extend([ps, pdf])
dep = Shell(doc.env.depends, cmd, [pdf], [ps])
env.final = dep
def __init__(self, document, opt):
ps = document.env.final.primary_product()
if not ps.endswith('.ps'):
raise rubber.GenericError(_("ps2pdf cannot produce PS"))
pdf = ps[:-2] + 'pdf'
dep = Shell(('ps2pdf', ps, pdf))
dep.add_product(pdf)
dep.add_source(ps)
document.env.final = dep
def __init__(self, document, context):
env = document.env
if env.final.products[0][-3:] != '.ps':
msg.error(_("I can't use ps2pdf when not producing a PS"))
rubber.util.abort_generic_error()
ps = env.final.products[0]
pdf = ps[:-2] + 'pdf'
cmd = ['ps2pdf']
for opt in document.vars['paper'].split():
cmd.append('-sPAPERSIZE=' + opt)
cmd.extend([ps, pdf])
dep = Shell(env.depends, cmd)
dep.add_product(pdf)
dep.add_source(ps)
env.final = dep
def convert(source, target, context, set):
base = target[:-4]
return Shell(set, ["cweave", source, target],
[target, base + ".idx", base + ".scn"], [source])
def convert(source, target, context, set):
result = Shell(set, parse_line(context['command'], context))
result.add_product(target)
result.add_source(source)
return result
def convert(source, target, context, env):
# The source path is embedded by fig2dev into the target,
# causing problem with LaTeX and non-ASCII characters.
# Always give a relative path.
if target[-2:] != '_t':
# Here we assume the target has an extension of a standard form, i.e.
# its requested type can be deduced from the part of its name after
# the last dot. We also assume that this extension is the name of the
# appropriate language (it works fine in the cases where the module is
# used, that is for eps, pdf and png).
language = target[target.rfind('.') + 1:]
result = Shell(('fig2dev', '-L', language, source, target))
result.add_product(target)
result.add_source(source)
return result
else:
# Here we assume that the target has the form BASE.EXT_t, where EXT is
# eps, pdf, pstex or pdftex. In this case we call fig2dev in such a
# way that BASE.EXT_t refers to graphics file BASE and not BASE.EXT.
# This way, the source will compile independently of the engine.
the_dot = target.rfind('.')
base_name = target[:the_dot]
extension = target[the_dot + 1:]
image_reference = base_name[base_name.rfind('/') + 1:]
if '.pdf' in env.graphics_suffixes:
language = 'pdftex'
image_file = base_name + '.pdf'
else:
language = 'pstex'
image_file = base_name + '.eps'
temp = Shell(('fig2dev', '-L', language, source, image_file))
temp.add_product(image_file)
temp.add_source(source)
result = Shell(('fig2dev', '-L', language + '_t', '-p',
image_reference, source, target))
result.add_product(target)
result.add_source(source)
result.add_source(image_file)
return result
def convert (source, target, context, set):
if target[-2:] != '_t':
# Here we assume the target has an extension of a standard form, i.e.
# its requested type can be deduced from the part of its name after
# the last dot. We also assume that this extension is the name of the
# appropriate language (it works fine in the cases where the module is
# used, that is for eps, pdf and png).
language = target[target.rfind('.')+1:]
result = Shell (set, ['fig2dev', '-L', language, source, target])
result.add_product (target)
result.add_source (source)
return result
else:
# Here we assume that the target has the form BASE.EXT_t, where EXT is
# eps, pdf, pstex or pdftex. In this case we call fig2dev in such a
# way that BASE.EXT_t refers to graphics file BASE and not BASE.EXT.
# This way, the source will compile independently of the engine.
the_dot = target.rfind('.')
base_name = target[:the_dot]
extension = target[the_dot+1:]
image_reference = base_name[base_name.rfind('/')+1:]
if 'graphics_suffixes' in context:
if '.pdf' in context['graphics_suffixes']:
language = 'pdftex'
image_file = base_name + '.pdf'
else:
language = 'pstex'
image_file = base_name + '.eps'
elif extension in ('pdftex_t', 'pdf_t'):
language = 'pdftex'
image_file = base_name + '.pdf'
else:
language = 'pstex'
image_file = base_name + '.eps'
temp = Shell (set, ['fig2dev', '-L', language, source, image_file])
temp.add_product (image_file)
temp.add_source (source)
result = Shell (set, ['fig2dev', '-L', language + '_t',
'-p', image_reference, source, target])
result.add_product (target)
result.add_source (source)
result.add_source (image_file)
return result
def convert (source, target, context, set): result = Shell (set, parse_line(context['command'], context)) result.add_product (target) result.add_source (source) return result
def convert(source, target, context, set):
return Shell(set, parse_line(context['command'], context), [target],
[source])
def __init__(self, set, target, source):
assert target[-4:] == '.tex'
base = target[:-4]
Shell.__init__(self, set, ["cweave", source, target],
[target, base + ".idx", base + ".scn"], [source])