def osciallating_param_costs():
U1, U2, U1_, U2_ = [unitary_group.rvs(4).reshape(2,2,2,2) for _ in range(4)]
RE = RightEnvironment()
params = np.random.rand(6)
C = CircuitSolver()
for i in range(len(params)):
Ms = []
M_s = []
for p in np.linspace(0,np.pi*2, 200):
params[i] = p
M = C.M(params)
M_ = RE.circuit(U1, U2, U1_, U2_, M)
Ms.append(M.reshape(4,))
M_s.append(M_.reshape(4,))
scores = np.linalg.norm(np.array(Ms) - np.array(M_s), axis = 1)
plt.plot(scores, label = f"{i}")
plt.legend()
plt.show()
def circuit_ansatz(params, wires):
"""Circuit ansatz containing all the parametrized gates"""
qml.QubitStateVector(unitary_group.rvs(2**4, random_state=0)[0],
wires=wires)
qml.RX(params[0], wires=wires[0])
qml.RY(params[1], wires=wires[1])
qml.RX(params[2], wires=wires[2]).inv()
qml.RZ(params[0], wires=wires[3])
qml.CRX(params[3], wires=[wires[3], wires[0]])
qml.PhaseShift(params[4], wires=wires[2])
qml.CRY(params[5], wires=[wires[2], wires[1]])
qml.CRZ(params[5], wires=[wires[0], wires[3]]).inv()
qml.PhaseShift(params[6], wires=wires[0]).inv()
qml.Rot(params[6], params[7], params[8], wires=wires[0])
# # qml.Rot(params[8], params[8], params[9], wires=wires[1]).inv()
qml.MultiRZ(params[11], wires=[wires[0], wires[1]])
# # qml.PauliRot(params[12], "XXYZ", wires=[wires[0], wires[1], wires[2], wires[3]])
qml.CPhase(params[12], wires=[wires[3], wires[2]])
qml.IsingXX(params[13], wires=[wires[1], wires[0]])
qml.IsingXY(params[14], wires=[wires[3], wires[2]])
qml.IsingYY(params[14], wires=[wires[3], wires[2]])
qml.IsingZZ(params[14], wires=[wires[2], wires[1]])
qml.U1(params[15], wires=wires[0])
qml.U2(params[16], params[17], wires=wires[0])
qml.U3(params[18], params[19], params[20], wires=wires[1])
# # qml.CRot(params[21], params[22], params[23], wires=[wires[1], wires[2]]).inv() # expected tofail
qml.SingleExcitation(params[24], wires=[wires[2], wires[0]])
qml.DoubleExcitation(params[25],
wires=[wires[2], wires[0], wires[1], wires[3]])
qml.SingleExcitationPlus(params[26], wires=[wires[0], wires[2]])
qml.SingleExcitationMinus(params[27], wires=[wires[0], wires[2]])
qml.DoubleExcitationPlus(params[27],
wires=[wires[2], wires[0], wires[1], wires[3]])
qml.DoubleExcitationMinus(params[27],
wires=[wires[2], wires[0], wires[1], wires[3]])
qml.RX(params[28], wires=wires[0])
qml.RX(params[29], wires=wires[1])
def test_unitary_qsd_4qubits(self):
u = unitary_group.rvs(16)
gate = unitary(u, 'qsd')
state = get_state(gate)
self.assertTrue(np.allclose(u[:, 0], state))
circuit = qiskit.QuantumCircuit(4)
circuit.x(0)
circuit.append(gate, circuit.qubits)
state = get_state(circuit)
self.assertTrue(np.allclose(u[:, 1], state))
circuit = qiskit.QuantumCircuit(4)
circuit.x(1)
circuit.append(gate, circuit.qubits)
state = get_state(circuit)
self.assertTrue(np.allclose(u[:, 2], state))
circuit = qiskit.QuantumCircuit(4)
circuit.x([0, 1, 2, 3])
circuit.append(gate, circuit.qubits)
state = get_state(circuit)
self.assertTrue(np.allclose(u[:, 15], state))
def random_unitary_matrix(dim, seed):
rng = np.random.RandomState(seed)
return unitary_group.rvs(dim, random_state=rng)
def random_unitary(self):
return circuit.Unitary(1, unitary_group.rvs(2))
def __init__(self,
nbqubitinput,
arity,
length,
name,
learningrate=0,
momentum=0,
start=0):
super().__init__(nbqubitinput, name)
init = tf.orthogonal_initializer
self.arity = arity
size = 1 << arity
#real = tf.get_variable(name+"w",[size,size],initializer=init)
#real= tf.multiply(1.0/tf.sqrt(2.0),tf.eye(size, dtype="float32"))
#imag = tf.multiply(1.0/tf.sqrt(2.0),tf.eye(size, dtype="float32"))
#param=tf.complex(real,imag)
param = tf.convert_to_tensor(unitary_group.rvs(size),
dtype='complex64')
paramdagger = tf.transpose(param, conjugate=True)
for y in range(start, length):
if (y % 2 == 0):
for x in range(0, nbqubitinput // arity):
with tf.variable_scope(name + "row" + str(y) + "gate" +
str(x)):
gate = genericQGate.genericQGate(
param, nbqubitinput, arity, x * arity,
learningrate, momentum)
self.gatelist.append(gate)
leftover = nbqubitinput % arity
pos = nbqubitinput - leftover
if (pos < nbqubitinput):
with tf.variable_scope(name + "row" + str(y) + "gate" +
str(pos)):
size = 1 << leftover
real = tf.get_variable("v", [size, size],
initializer=init)
#real = tf.eye(size, dtype="float32")
imag = tf.zeros_like(real)
param_l = tf.complex(real, imag)
gate = genericQGate.genericQGate(
param_l, nbqubitinput, leftover, pos, learningrate,
momentum)
self.gatelist.append(gate)
else:
with tf.variable_scope(name + "row" + str(y) + "gate0"):
real = [[1 / tf.sqrt(2.0), 1 / tf.sqrt(2.0)],
[1 / tf.sqrt(2.0), -1 / tf.sqrt(2.0)]]
imag = [[0.0, 0.0], [0.0, 0.0]]
hadamard = tf.complex(real, imag)
gate = genericQGate.genericQGate(hadamard, nbqubitinput, 1,
0, learningrate, momentum)
self.gatelist.append(gate)
for x in range(0, (nbqubitinput - 1) // arity):
with tf.variable_scope(name + "row" + str(y) + "gate" +
str(x + 1)):
gate = genericQGate.genericQGate(
paramdagger, nbqubitinput, arity, 1 + x * arity,
learningrate, momentum)
self.gatelist.append(gate)
leftover = (nbqubitinput - 1) % arity
pos = nbqubitinput - leftover
if (pos < nbqubitinput):
with tf.variable_scope(name + "row" + str(y) + "gate" +
str(pos)):
size = 1 << leftover
real = tf.get_variable("v", [size, size],
initializer=init)
#real = tf.eye(size, dtype="float32")
imag = tf.zeros_like(real)
param_l = tf.complex(real, imag)
gate = genericQGate.genericQGate(
param_l, nbqubitinput, leftover, pos, learningrate,
momentum)
self.gatelist.append(gate)
def create_random_unitary(n):
return unitary_group.rvs(2**n)
def test_compare_unitary(self):
# Given
U1 = unitary_group.rvs(4)
U2 = unitary_group.rvs(4)
# When/Then
self.assertFalse(compare_unitary(U1, U2))
"""This script is contains a simple use case of the QFAST synthesis method."""
from __future__ import annotations
import logging
from scipy.stats import unitary_group
from bqskit.compiler import CompilationTask
from bqskit.compiler import Compiler
from bqskit.compiler.passes.synthesis import QFASTDecompositionPass
from bqskit.ir import Circuit
if __name__ == '__main__':
# Enable logging
logging.getLogger('bqskit').setLevel(logging.DEBUG)
# Let's create a random 3-qubit unitary to synthesize and add it to a
# circuit.
circuit = Circuit.from_unitary(unitary_group.rvs(8))
# We will now define the CompilationTask we want to run.
task = CompilationTask(circuit, [QFASTDecompositionPass()])
# Finally let's create create the compiler and execute the CompilationTask.
with Compiler() as compiler:
compiled_circuit = compiler.compile(task)
for op in compiled_circuit:
print(op)
return res
def dispatch(nb_meas, probas, rule='rdm'):
assert np.allclose(np.sum(probas), 1.)
if rule == 'rdm':
samples = np.random.choice(len(probas), nb_meas, p = probas)
meas = [np.sum(samples == i) for i in range(len(probas))]
else:
meas = [int(p* nb_meas) for p in probas]
return np.array(meas)
# =========================================================================== #
# Testing the different measurement schemes
# =========================================================================== #
Target = ut.HDM
nb_meas = 1000
U = unitary_group.rvs(2, 1000)
u = [qt.Qobj(U_el, dims = [[2],[2]]) for U_el in U]
real_fid = np.array([ut.fid_perfect(unit, Target) for unit in u])
# Standard scheme
sch1 = produce_schemes_1q('strat1')(Target)
sch1_fid_perfect = np.array([measure_fid(unit, *sch1) for unit in u])
sch1_fid_limited = np.array([measure_fid(unit, *sch1, nb_meas = nb_meas) for unit in u])
sch1_smart = produce_schemes_1q('strat1_smart')(Target)
sch1_smart_perfect = np.array([measure_fid(unit, *sch1_smart) for unit in u])
sch1_smart_limited = np.array([measure_fid(unit, *sch1_smart, nb_meas = nb_meas) for unit in u])
sch1_diag = produce_schemes_1q('diag')(Target)
sch1_diag_perfect = np.array([measure_fid(unit, *sch1_diag) for unit in u])
description='Configuration for decomposition', add_help=True)
parser.add_argument('--num_qubits',
'-n',
type=int,
default=2,
help="Number of qubits")
parser.add_argument('--qasm_output',
'-q',
type=store_true,
help="Conversion to QASM format")
args = parser.parse_args()
print('Current directory: ', os.getcwd())
num_bits = args.num_qubits
print("Initializing random unitary U ..., num_qubits: ", num_bits)
init_unitary_mat = unitary_group.rvs(2**num_bits)
emb = CktEmbedder(num_bits, num_bits)
file_prefix = "decomposition_demo"
t = Tree(True, file_prefix, emb, init_unitary_mat, verbose=False)
t.close_files()
# The above code automatically creates an expansion of $U$
# into DIAG and MP_Y lines. Next we print the Picture file that was created.
file = './qubiter/quantum_CSD_compiler/' + file_prefix + "_2_ZLpic.txt"
df = pd.read_csv(file, delim_whitespace=True, header=None)
style = "exact"
xer = MultiplexorExpander(file_prefix, num_bits, style, verbose=False)
xer = DiagUnitaryExpander(file_prefix + "_X1", num_bits, style)
xer = MultiplexorExpander(file_prefix + "_X2",
# The next two lines start qfactor's logger.
import logging
logging.getLogger("qfactor").setLevel(logging.INFO)
# We will optimize towards the toffoli unitary.
toffoli = np.array([[1, 0, 0, 0, 0, 0, 0, 0], [0, 1, 0, 0, 0, 0, 0, 0],
[0, 0, 1, 0, 0, 0, 0, 0], [0, 0, 0, 1, 0, 0, 0, 0],
[0, 0, 0, 0, 1, 0, 0, 0], [0, 0, 0, 0, 0, 1, 0, 0],
[0, 0, 0, 0, 0, 0, 0, 1], [0, 0, 0, 0, 0, 0, 1, 0]])
# Start with the circuit structure
# and an initial guess for the gate's unitaries.
# Here we use randomly generated unitaries for initial guess.
circuit = [
Gate(unitary_group.rvs(4), (1, 2)),
Gate(unitary_group.rvs(4), (0, 2)),
Gate(unitary_group.rvs(4), (1, 2)),
Gate(unitary_group.rvs(4), (0, 2)),
Gate(unitary_group.rvs(4), (0, 1))
]
# Note: the Gate object also has an optional boolean parameter "fixed"
# If "fixed" is set to true, that gate's unitary will not change.
# Call the optimize function
ans = optimize(
circuit,
toffoli, # <--- These are the only required args
diff_tol_a=1e-12, # Stopping criteria for distance change
diff_tol_r=1e-6, # Relative criteria for distance change
"""
ket_input = []
ket_output = []
for i in range(m):
ket_input.append(jnp.array(rand_ket(d, seed=300).full()))
# Output data -- action of unitary on a ket states
ket_output.append(jnp.dot(tar_unitr, ket_input[i]))
return (ket_input, ket_output)
m = 100 # number of training data points
N = 8 # Dimension of the unitary to be learnt
train_len = int(m * 0.8)
# tar_unitr gives a different unitary each time
tar_unitr = jnp.asarray(unitary_group.rvs(N))
ket_input, ket_output = make_dataset(m, N)
# ## Cost Function
#
# We use the same cost function as the authors
# [Seth Lloyd and Reevu Maity, 2020](https://arxiv.org/pdf/1901.03431.pdf)
# define
#
# $\begin{equation} \label{err_ps}
# E = 1 - (\frac{1}{M})\sum_{i} \langle \psi_{i}|U^{\dagger} U(\vec{\theta}, \vec{\phi}, \vec{\omega})|\psi_{i}\rangle
# \end{equation}$,
#
# where $ |\psi_{i} \rangle$ is the training (or testing)
# data points -- in this case, kets, $U$ and
# $U(\vec{\theta}, \vec{\phi}, \vec{\omega})$ are the target and
scores = []
for p in x:
scores.append(np.linalg.norm(p * M - M_))
coefs = Polynomial.fit(x[:10],scores[:10],deg = 2, domain = (1,0.9))
new_vals = [coefs(a) for a in x]
plt.plot(x, scores, label = "Exact")
plt.plot(x, new_vals, label = "Poly Fit")
plt.legend()
plt.show()
if __name__ == "__main__":
################
# Set up a random environment calculation
U1, U2, U1_, U2_ = [unitary_group.rvs(4).reshape(2,2,2,2) for _ in range(4)]
RE = RightEnvironment()
R = Represent()
R.U1 = U1
R.U2 = U2
R.U1_ = U1_
R.U2_ = U2_
###############
# Demonstrate the sinusoidal cost Function
params = np.random.rand(6)
C = CircuitSolver()
params = [1] + list(np.random.rand(6))
CostFuncs = []
x = np.linspace(0,2*np.pi, 200)
def test_hermitian():
u = unitary_group.rvs(3)
return Operator.is_hermitian(u)
def test_unitarity():
u = unitary_group.rvs(3)
return Operator.is_unitary(u)
num_orbitals=2,
num_spins=2,
nw=400,
ntau=801,
)
up, do = '0', '1'
p.spin_names = [up, do]
p.orb_names = range(p.num_orbitals)
# -- Unitary transform
if False:
from scipy.stats import unitary_group, ortho_group
np.random.seed(seed=233423) # -- Reproducible "randomness"
p.T = unitary_group.rvs(4) # General complex unitary transf
#p.T = np.kron(ortho_group.rvs(2), np.eye(2)) # orbital only rotation
# use parametrized "weak" realvalued 4x4 transform
p.T = unitary_transf_4x4(t_vec=[0.3, 0.3, 0.3, 0.0, 0.0, 0.0])
#p.T = unitary_transf_4x4(t_vec=[0.25*np.pi, 0.0, 0.0, 0.0, 0.0, 0.0])
#p.T = np.eye(4)
p.T = np.matrix(p.T)
print p.T
# -- Different types of operator sets
p.op_imp = [c('0', 0), c('0', 1), c('0', 2), c('0', 3)]
p.op_full = p.op_imp + [c('1', 0), c('1', 1), c('1', 2), c('1', 3)]
p.spin_block_ops = [c('0', 0), c('1', 0), c('0', 1), c('1', 1)]
def test_passive_channel(self, M, setup_eng, tol):
"""check that passive channel is consistent with unitary methods"""
U = unitary_group.rvs(M)
loss_in = np.random.random(M)
loss_out = np.random.random(M)
T = (np.sqrt(loss_in) * U) * np.sqrt(loss_out[np.newaxis].T)
eng, prog = setup_eng(M)
with prog.context as q:
for i in range(M):
ops.Sgate(1) | q[i]
ops.Dgate(A) | q[i]
ops.PassiveChannel(T) | q
state = eng.run(prog).state
cov1 = state.cov()
mu1 = state.means()
eng, prog = setup_eng(M)
with prog.context as q:
for i in range(M):
ops.Sgate(1) | q[i]
ops.Dgate(A) | q[i]
ops.LossChannel(loss_in[i]) | q[i]
ops.Interferometer(U) | q
for i in range(M):
ops.LossChannel(loss_out[i]) | q[i]
state = eng.run(prog).state
cov2 = state.cov()
mu2 = state.means()
assert np.allclose(cov1, cov2, atol=tol, rtol=0)
assert np.allclose(mu1, mu2, atol=tol, rtol=0)
u, s, v = np.linalg.svd(T)
eng, prog = setup_eng(M)
with prog.context as q:
for i in range(M):
ops.Sgate(1) | q[i]
ops.Dgate(A) | q[i]
ops.Interferometer(v) | q
for i in range(M):
ops.LossChannel(s[i]**2) | q[i]
ops.Interferometer(u) | q
state = eng.run(prog).state
cov3 = state.cov()
mu3 = state.means()
assert np.allclose(cov1, cov3, atol=tol, rtol=0)
assert np.allclose(mu1, mu3, atol=tol, rtol=0)
T1 = u * s
eng, prog = setup_eng(M)
with prog.context as q:
for i in range(M):
ops.Sgate(1) | q[i]
ops.Dgate(A) | q[i]
ops.PassiveChannel(v) | q
ops.PassiveChannel(T1) | q
state = eng.run(prog).state
cov4 = state.cov()
mu4 = state.means()
assert np.allclose(cov1, cov4, atol=tol, rtol=0)
assert np.allclose(mu1, mu4, atol=tol, rtol=0)
def main():
# input_dict = input_reader('input.txt')
# n_qubits = input_dict['n_qubits']
# max_ebits = ceil(n_qubits/2)
# n_instances = input_dict['n_instances']
# method = input_dict['method']
n_qubits = int(input("Enter the number of qubits: "))
max_ebits = ceil(n_qubits / 2)
n_instances = int(
input("Enter the number of random unitaries to average over: "))
method = str(
input(
"Enter the name of an optimization method. The supported ones are: \n\tNelder-Mead \n\tBFGS \n\tL-BFGS-B \n\tPowell \n\tSLSQP \n\tTNC \n Please choose one"
))
unitaries = [unitary_group.rvs(2**n_qubits) for i in range(n_instances)]
fun_values = [[0]] * max_ebits
overlaps = [[0]] * max_ebits
entropies = [[0]] * max_ebits
start_time = time.time()
for p in range(n_instances):
print('Iteration', p + 1)
initial_state_vec = np.array([1] + [0] * (2**n_qubits - 1))
for ebits in range(1, max_ebits + 1):
print('\t Ebits in MPS:', ebits)
local_time = time.time()
state_tensor_network = []
for n in range(n_qubits - ebits):
target_qubits = [(i + n) for i in range(ebits + 1)]
state_tensor_network = state_tensor_network + hea_ansatz_eff(
n_qubits, ebits, target_qubits)
for i in range(len(state_tensor_network)):
state_tensor_network[i]['block_number'] = i
n_pars = len(
extract_parameters_from_tensor_network(state_tensor_network))
update_tensor_network(state_tensor_network,
[0 for i in range(n_pars)])
result = approximate_mps_qiskit(n_qubits, initial_state_vec,
state_tensor_network, unitaries[p],
method)
l = len(result[0])
k = ebits - 1
fun_values[k] = np.concatenate(
(fun_values[k],
[fun_values[k][-1]] * (l - len(fun_values[k]))))
new_fun_values = np.concatenate(
(result[0], [result[0][-1]] * (len(fun_values[k]) - l)))
fun_values[k] = np.array(fun_values[k]) + np.array(new_fun_values)
overlaps[k] = np.concatenate(
(overlaps[k], [overlaps[k][-1]] * (l - len(overlaps[k]))))
new_overlaps = np.concatenate(
(result[1], [result[1][-1]] * (len(overlaps[k]) - l)))
overlaps[k] = np.array(overlaps[k]) + np.array(new_overlaps)
entropies[k] = np.concatenate(
(entropies[k], [entropies[k][-1]] * (l - len(entropies[k]))))
new_entropies = np.concatenate(
(result[2], [result[2][-1]] * (len(entropies[k]) - l)))
entropies[k] = np.array(entropies[k]) + np.array(new_entropies)
initial_state_vec = result[4]
print('\t\t Completed in', time.time() - local_time)
verts = [0]
for line in fun_values:
verts.append(verts[-1] + len(line))
# verts.pop(-1)
fun_values_flat = np.array([])
for line in fun_values:
fun_values_flat = np.concatenate((fun_values_flat, line))
fun_values_flat = fun_values_flat / n_instances
overlaps_flat = np.array([])
for line in overlaps:
overlaps_flat = np.concatenate((overlaps_flat, line))
overlaps_flat = overlaps_flat / n_instances
entropies_flat = np.array([])
for line in entropies:
entropies_flat = np.concatenate((entropies_flat, line))
entropies_flat = entropies_flat / n_instances
print('Completed in', time.time() - start_time)
# write the data
file = open('fun_values_flat.txt', 'w')
for fun_value in fun_values_flat:
file.write(str(fun_value) + '\n')
file.close()
file = open('overlaps_flat.txt', 'w')
for overlap in overlaps_flat:
file.write(str(overlap) + '\n')
file.close()
file = open('entropies_flat.txt', 'w')
for entropy in entropies_flat:
file.write(str(entropy) + '\n')
file.close()
# plot
figsize = (10, 8)
tickssize = 12
fontsize = 16
linewidth = 1
x_axis = list(range(len(fun_values_flat)))
x_ticks = x_axis
s = 0
k = len(fun_values_flat)
fig = plt.figure(figsize=figsize)
gs = gridspec.GridSpec(3, 1, height_ratios=[1, 1, 1])
ax0 = plt.subplot(gs[0]) #
ax0.plot(x_axis[s:k],
1 - fun_values_flat[s:k],
color='tab:red',
linewidth=2.5)
ax0.hlines(y=0, xmin=s, xmax=k, colors='black', linestyles='solid')
ax0.hlines(y=1, xmin=s, xmax=k, colors='green', linestyles='dashed')
for v in verts:
ax0.vlines(x=v, ymin=0, ymax=1.1, linestyles='solid', linewidth=1)
ax0.set_ylabel('Function value', fontsize=fontsize)
ax0.set_xlim(s, k)
ax0.set_ylim(0, 1.1)
ax0.grid()
plt.xticks(fontsize=0)
plt.yticks(fontsize=tickssize)
ax1 = plt.subplot(gs[1])
plt.plot(x_axis[s:k], overlaps_flat[s:k], color='tab:blue', linewidth=2.5)
ax1.hlines(y=0, xmin=s, xmax=k, colors='black', linestyles='solid')
ax1.hlines(y=1, xmin=s, xmax=k, colors='green', linestyles='dashed')
for v in verts:
ax1.vlines(x=v, ymin=0, ymax=1.1, linestyles='solid', linewidth=1)
ax1.set_ylabel('Overlap', fontsize=fontsize)
ax1.hlines(y=0,
xmin=x_axis[s:][0],
xmax=x_axis[s:][-1],
colors='black',
linestyles='solid')
ax1.hlines(y=1,
xmin=x_axis[s:][0],
xmax=x_axis[s:][-1],
colors='green',
linestyles='dashed')
ax1.set_xlim(s, k)
ax1.set_ylim(0, 1.1)
ax1.grid()
plt.xticks(fontsize=0)
plt.yticks(fontsize=tickssize)
ax2 = plt.subplot(gs[2], sharex=ax1)
plt.setp(ax1.get_xticklabels(), visible=False)
ax2.plot(x_axis[s:k], entropies_flat[s:k], color='purple', linewidth=2.5)
ax2.hlines(y=0, xmin=s, xmax=k, colors='black', linestyles='solid')
for v in verts:
ax2.vlines(x=v,
ymin=0,
ymax=max_ebits + 0.4,
linestyles='solid',
linewidth=1)
ax2.set_xlabel('Iterations', fontsize=fontsize)
ax2.set_ylabel('Entanglement', fontsize=fontsize)
ax2.hlines(y=0,
xmin=x_axis[s:][0],
xmax=x_axis[s:][-1],
colors='black',
linestyles='solid')
for r in range(1, max_ebits + 1):
ax2.hlines(y=r,
xmin=verts[r - 1],
xmax=verts[r],
colors='green',
linestyles='dashed')
ax2.set_xlim(s, k)
ax2.set_ylim(0, max_ebits + 0.4)
ax2.grid()
plt.xticks(fontsize=tickssize)
plt.yticks(fontsize=tickssize)
plt.subplots_adjust(hspace=0)
plt.savefig('plot-' + str(n_qubits) + 'q-' + str(max_ebits) + 'l-' +
str(n_instances) + 'i-' + method + '.pdf',
bbox_inches='tight')
def test_is_unitary(self):
# Given
U = unitary_group.rvs(4)
# When/Then
self.assertTrue(is_unitary(U))
def test_optimize_fixed(self):
u1 = unitary_group.rvs(8)
g1 = Gate(u1, (0, 1, 2))
circ = optimize([g1], u1)
self.assertTrue(np.allclose(circ[0].utry, g1.utry))
# Obtain the single qubit unitaries
Gs, Rs = decompose_uniformly_controlled_unitaries(unitaries)
assert len(Gs) == 2**n
# Return the result
return fill_uniformly_controlled_circuit(Gs, cqs, tq), Rs
if __name__ == "__main__":
from scipy.stats import unitary_group
from pyquil.quil import Pragma
import itertools as it
np.set_printoptions(linewidth=200)
n = 2
unitaries = [unitary_group.rvs(2) for _ in range(2**n)]
qubits = list(range(n + 1))
program = pq.Program()
UCC, R = generate_uniformly_controlled_circuit(unitaries, qubits[:n],
qubits[-1])
program += UCC
print("program:")
print(program)
print("Phases:")
print(R)
exit()
# Correct indexing mess
corrected_U = np.empty(U.shape, dtype=np.complex_)
for i, j in it.product(range(2**(n + 1)), repeat=2):
def random_unitary_matrix(dim: int, seed: int):
rng = np.random.RandomState(seed)
return unitary_group.rvs(dim, random_state=rng)
def test_mixed_polarity_controls(self, control_wires, wires,
control_values):
"""Test if ControlledQubitUnitary properly applies mixed-polarity
control values."""
target_wires = Wires(wires)
dev = qml.device("default.qubit",
wires=len(control_wires + target_wires))
# Pick a random unitary
U = unitary_group.rvs(2**len(target_wires), random_state=1967)
# Pick random starting state for the control and target qubits
control_state_weights = np.random.normal(
size=(2**(len(control_wires) + 1) - 2))
target_state_weights = np.random.normal(
size=(2**(len(target_wires) + 1) - 2))
@qml.qnode(dev)
def circuit_mixed_polarity():
qml.templates.ArbitraryStatePreparation(control_state_weights,
wires=control_wires)
qml.templates.ArbitraryStatePreparation(target_state_weights,
wires=target_wires)
qml.ControlledQubitUnitary(U,
control_wires=control_wires,
wires=target_wires,
control_values=control_values)
return qml.state()
# The result of applying the mixed-polarity gate should be the same as
# if we conjugated the specified control wires with Pauli X and applied the
# "regular" ControlledQubitUnitary in between.
x_locations = [
x for x in range(len(control_values)) if control_values[x] == "0"
]
@qml.qnode(dev)
def circuit_pauli_x():
qml.templates.ArbitraryStatePreparation(control_state_weights,
wires=control_wires)
qml.templates.ArbitraryStatePreparation(target_state_weights,
wires=target_wires)
for wire in x_locations:
qml.PauliX(wires=control_wires[wire])
qml.ControlledQubitUnitary(U,
control_wires=control_wires,
wires=wires)
for wire in x_locations:
qml.PauliX(wires=control_wires[wire])
return qml.state()
mixed_polarity_state = circuit_mixed_polarity()
pauli_x_state = circuit_pauli_x()
assert np.allclose(mixed_polarity_state, pauli_x_state)
def random_unitary(qnum):
dim = 2**qnum
mat = unitary_group.rvs(dim)
return mat
#!/usr/bin/env python3
# -*- coding: utf-8 -*-
"""
Created on Thu Feb 7 16:25:18 2019
@author: fred
"""
import matplotlib.pylab as plt
from scipy.stats import unitary_group
U = unitary_group.rvs(4, 100000)
import numpy as np
comput_basis = [np.array([1.,0.,0.,0.]), np.array([0.,1.,0.,0.]), np.array([0.,0.,1.,0.]), np.array([0.,0.,0.,1.])]
state_basis = [np.array([1.,0.,0.,0.]), np.array([0.,1.,0.,0.]), np.array([0., 0., 1/np.sqrt(2), 1/np.sqrt(2)]),np.array([0.,0.,1.,0.]), np.array([0.,0.,0.,1.])]
state_decompo = np.array([1,1,2,-1,-1])
cnot = np.array([[1.-0.j, 0., 0., 0.], [0., 1., 0., 0.], [0., 0., 0., 1.], [0., 0., 1., 0.]])
def fid1(A, T= cnot):
d = A.shape[0]
f = np.square(np.abs(1/d * np.trace(np.transpose(np.conj(A)).dot(T))))
return f
def fid_cheap(A, T=cnot, basis=comput_basis):
ev_A = [A.dot(b) for b in basis]
ev_T = [T.dot(b) for b in basis]
f = np.average([np.square(np.abs(np.dot(np.conj(t), a))) for a, t in zip(ev_A, ev_T)])
return f
def gen_hermite(eig, compl=False):
n = eig.shape[0]
B = unitary_group.rvs(n)
return B.T.conj() @ np.diag(eig) @ B
def test_cossin_error_missing_partitioning():
with pytest.raises(ValueError, match=".*exactly four arrays.* got 2"):
cossin(unitary_group.rvs(2))
with pytest.raises(ValueError, match=".*might be due to missing p, q"):
cossin(unitary_group.rvs(4))
if term > 0 and 1 / np.cosh(0.5 * term) < np.exp(-e**2 / (4 * K)):
print("This experiment evades our algorithm!")
return
else:
# sample from the output state
mean = np.zeros([2 * M])
V = ClosestClassicalState(r, K, eta, U, tbar)
import time
t0 = time.time()
x = np.random.multivariate_normal(
mean, np.linalg.inv(V - tbar * np.identity(2 * M)))
# sample from the measurement
n = [
bernoulli.rvs(np.exp(-(x[i]**2 + x[i + 1]**2) / 4))
for i in range(len(x) - 1)
]
print("{} sec".format(time.time() - t0))
return n
r = 0.1
K = 4
eta = 0.088
U = unitary_group.rvs(12)
etaD = 0.78
pD = 10**(-4)
e = 0.023
n = sampleGBS(r, K, eta, U, etaD, pD, e)
print(n)