def test_variation(self):
for n in self.get_n():
x, y, xm, ym = self.generate_xy_sample(n)
assert_almost_equal(stats.variation(x), stats.mstats.variation(xm),
decimal=12)
assert_almost_equal(stats.variation(y), stats.mstats.variation(ym),
decimal=12)
def collect_cv_Alternative(spike_data):
'''
Input => Spike data for each cell
[[spike_amp, spike_peak, spike_right_edge]...]]
Output => Appended list of CV for all the cells
'''
a = spike_data
amp_collect = []
cv_collect = []
for i in range(len(a)):
if i > 0: #Collect the previous list of amplitudes and calculate CV
if amp_collect == []: #the cell has empty array, no amplitudes are collected
cv_collect.append(0)
else:
cv_collect.append(stats.variation(amp_collect)) #Calculate CV
amp_collect = [
] #Collect the next cell amplitudes with empty list
if len(a[i]) != 0:
for j in range(len(a[i])): #Specified cell
if a[i][j] != []:
for k in range(len(a[i][j])):
if a[i][j][k] != []:
for l in range(len(a[i][j][k])):
if l == 0:
amp_collect.append(
a[i][j][k]
[l]) #Append the list with amplitudes
if i == 24 and j == 4:
cv_collect.append(
stats.variation(amp_collect))
return cv_collect
def fit_CpoR(self, T, CpoR):
"""
Fits parameters a1 - a6 using dimensionless heat capacity and temperature.
Parameters
----------
T - (N,) ndarray
Temperatures (K) to fit the polynomial
CpoR - (N,) ndarray
Dimensionless heat capacities that correspond to T array
"""
#If the Cp/R does not vary with temperature (occurs when no vibrational frequencies are listed)
if (np.mean(CpoR) < 1e-6 and np.isnan(
variation(CpoR))) or variation(CpoR) < 1e-3 or all(
np.isnan(CpoR)):
self.T_mid = T[int(len(T) / 2)]
self.a_low = np.array(7 * [0.])
self.a_high = np.array(7 * [0.])
else:
max_R2 = -1
R2 = np.zeros(len(T))
for i, T_mid in enumerate(T):
#Need at least 5 points to fit the polynomial
if i > 5 and i < (len(T) - 6):
#Separate the temperature and heat capacities into low and high range
(R2[i], a_low, a_high) = self._get_CpoR_R2(T, CpoR, i)
max_R2 = max(R2)
max_i = np.where(max_R2 == R2)[0][0]
(max_R2, a_low_rev, a_high_rev) = self._get_CpoR_R2(T, CpoR, max_i)
empty_arr = np.array([0.] * 2)
self.T_mid = T[max_i]
self.a_low = np.concatenate((a_low_rev[::-1], empty_arr))
self.a_high = np.concatenate((a_high_rev[::-1], empty_arr))
def _fit_CpoR(T, CpoR, units):
"""Fit a[0]-a[4] coefficients given the dimensionless heat capacity data
Parameters
----------
T : (N,) `numpy.ndarray`_
Temperatures in K
CpoR : (N,) `numpy.ndarray`_
Dimensionless heat capacity
units : str
Units corresponding to Shomate polynomial. Units should be supported
by :class:`~pmutt.constants.R`.
Returns
-------
a : (8,) `numpy.ndarray`_
Lower coefficients of Shomate polynomial
.. _`numpy.ndarray`: https://docs.scipy.org/doc/numpy/reference/generated/numpy.ndarray.html
"""
# If the Cp/R does not vary with temperature (occurs when no
# vibrational frequencies are listed), return default values
if (np.isclose(np.mean(CpoR), 0.) and np.isnan(variation(CpoR))) \
or np.isclose(variation(CpoR), 0.) \
or any([np.isnan(x) for x in CpoR]):
return np.zeros(7)
else:
# Pass the unit set
adj_shomate_CpoR = lambda T, A, B, C, D, E: _shomate_CpoR(
T=T, A=A, B=B, C=C, D=D, E=E, units=units)
[a, _] = curve_fit(adj_shomate_CpoR, T, np.array(CpoR))
a = np.append(a, [0., 0., 0.])
return a
def SPAEF(s, o):
#remove NANs
s, o = filter_nan(s, o)
bins = np.around(math.sqrt(len(o)), 0)
#compute corr coeff
alpha = np.corrcoef(s, o)[0, 1]
#compute ratio of CV
beta = variation(s) / variation(o)
#compute zscore mean=0, std=1
o = zscore(o)
s = zscore(s)
#compute histograms
hobs, binobs = np.histogram(o, bins)
hsim, binsim = np.histogram(s, bins)
#convert int to float, critical conversion for the result
hobs = np.float64(hobs)
hsim = np.float64(hsim)
#find the overlapping of two histogram
minima = np.minimum(hsim, hobs)
#compute the fraction of intersection area to the observed histogram area, hist intersection/overlap index
gamma = np.sum(minima) / np.sum(hobs)
#compute SPAEF finally with three vital components
spaef = 1 - np.sqrt((alpha - 1)**2 + (beta - 1)**2 + (gamma - 1)**2)
return spaef, alpha, beta, gamma
def point_filter(p):
# not near any existing points
for q in existing_points:
if (q[0] - p[0]) ** 2 + (q[1] - p[1]) ** 2 < r_sq:
return False
c, r = int(p[0]), int(p[1])
# cannot be near the edge of the image
if (c < side_thresh or r < side_thresh or
cols - c < side_thresh or rows - r < side_thresh):
return False
# cannot be super bright or dark
if not (0.02 < np.mean(image[r, c, :]) < 0.98):
return False
# cannot be on an edge
r0, r1 = max(r - edge_window, 0), min(r + edge_window + 1, rows)
c0, c1 = max(c - edge_window, 0), min(c + edge_window + 1, cols)
if np.any(image_canny[r0:r1, c0:c1]):
return False
# chromaticity coefficient of variation cannot be too high
# (cv = std / mean)
chroma_cv = 0.5 * (
variation(image_lab[r0:r1, c0:c1, 1], axis=None) +
variation(image_lab[r0:r1, c0:c1, 2], axis=None)
)
return chroma_cv < 0.50
def read_output(ndata, ntimes, Nt, ngx, ngy):
y = np.full( (ndata,ntimes,ngx,ngy), 0.0)
for i in range(1, ndata + 1):
for j in range(1, ntimes + 1):
y[i-1, j-1, :, :] = np.loadtxt("output/conc_{}_t_{}.dat".format(i,j))
y = np.where(y>0.0,y,0.0)
y0 = y[:,:Nt]
# id0 = y0.nonzero()
# y0 = y0[id0]
y1 = y[:,Nt:]
# id1 = y1.nonzero()
# y1 = y1[id1]
# y0_mean = np.average(y0)
# y1_mean = np.average(y1)
y_cov0 = variation(y0,axis=None)
y_cov1 = variation(y1,axis=None)
# print("cov0: {}".format(y_cov0))
# print("cov1: {}".format(y_cov1))
weight = y_cov0 / y_cov1
weight = 5
print("weight:{}".format(weight))
with open("weight.txt", "w") as text_file:
text_file.write("%f" % weight)
return weight
def _fit_CpoR(T, CpoR):
"""Fit a[0]-a[4] coefficients given the dimensionless heat capacity data
Parameters
----------
T : (N,) `numpy.ndarray`_
Temperatures in K
CpoR : (N,) `numpy.ndarray`_
Dimensionless heat capacity
Returns
-------
a : (8,) `numpy.ndarray`_
Lower coefficients of Shomate polynomial
.. _`numpy.ndarray`: https://docs.scipy.org/doc/numpy-1.14.0/reference/generated/numpy.ndarray.html
"""
# If the Cp/R does not vary with temperature (occurs when no
# vibrational frequencies are listed), return default values
if (np.isclose(np.mean(CpoR), 0.) and np.isnan(variation(CpoR))) \
or np.isclose(variation(CpoR), 0.) \
or any([np.isnan(x) for x in CpoR]):
return np.zeros(7)
else:
[a, _] = curve_fit(_shomate_CpoR, T, np.array(CpoR))
a = np.append(a, [0., 0., 0.])
return a
def test_variation(self):
for n in self.get_n():
x, y, xm, ym = self.generate_xy_sample(n)
assert_almost_equal(stats.variation(x), stats.mstats.variation(xm),
decimal=12)
assert_almost_equal(stats.variation(y), stats.mstats.variation(ym),
decimal=12)
def get_score(a, maxvar):
a1 = [float(x) for x in a[1].split(";")]
a2 = [float(x) for x in a[2].split(";")]
var1, var2, var3 = variation(a1), variation(a2), variation([sum(a1), sum(a2)])
varscore = get_varscore(var1, var2, var3, maxvar)
change = abs(float(a[3]))
expression = (sum(a1) + sum(a2))/(len(a1) + len(a2))
return (change**2)*expression*varscore
def test_neg_inf(self):
# Edge case that produces -inf: ddof equals the number of non-nan
# values, the values are not constant, and the mean is negative.
x1 = np.array([-3, -5])
assert_equal(variation(x1, ddof=2), -np.inf)
x2 = np.array([[np.nan, 1, -10, np.nan], [-20, -3, np.nan, np.nan]])
assert_equal(variation(x2, axis=1, ddof=2, nan_policy='omit'),
[-np.inf, -np.inf])
def test_variation_ddof(self):
# test variation with delta degrees of freedom
# regression test for gh-13341
a = np.array([1, 2, 3, 4, 5])
nan_a = np.array([1, 2, 3, np.nan, 4, 5, np.nan])
y = variation(a, ddof=1)
nan_y = variation(nan_a, nan_policy="omit", ddof=1)
assert_allclose(y, np.sqrt(5 / 2) / 3)
assert y == nan_y
def test_mean_zero(self):
# Check that `variation` returns inf for a sequence that is not
# identically zero but whose mean is zero.
x = np.array([10, -3, 1, -4, -4])
y = variation(x)
assert_equal(y, np.inf)
x2 = np.array([x, -10 * x])
y2 = variation(x2, axis=1)
assert_equal(y2, [np.inf, np.inf])
def SPAEF(data1, data2, bins):
A = np.corrcoef(data1, data2)[0, 1]
B = variation(data1) / variation(data2)
data1, data2 = zscore(data1), zscore(data2)
h1, _ = np.histogram(data1, bins)
h2, _ = np.histogram(data2, bins)
h1, h2 = np.float64(h1), np.float64(h2)
minima = np.minimum(h1, h2)
C = np.sum(minima) / np.sum(h1)
return 1 - np.sqrt((1 - A)**2 + (1 - B)**2 + (1 - C)**2)
def record_statistics(self): """ record data as system runs forward in time """ wealth = [] prices = [] for firm in self.economy.firms_list: wealth.append(firm.wealth) prices.append(firm.price) self.wealth.append(sum(wealth)) self.wealth_cv.append(stats.variation(wealth)) self.prices_mean.append(np.mean(prices)) self.prices_cv.append(stats.variation(prices))
def curvature_period_features(
AMSD, vertices, signal_smooth, peaks, valleys
): # mean and S.D. coefficient of variation of curvatures at vertices
"""
mean of curvatures (d2x/dt2) at vertices
S.D. of curvatures at vertices
coefficient of variation of curvatures at vertices
vertex counts/sec
S.D. of vertex-to-vertex period
coefficient of variation of vertex-to-vertex period
count of mean crossings/sec (hysteresis = 25% of AMSD)
"""
dx_dt = np.gradient(peaks)
dy_dt = np.gradient(signal_smooth[peaks])
d2x_dt2 = np.gradient(dx_dt)
d2y_dt2 = np.gradient(dy_dt)
peak_curvature = np.abs(d2x_dt2 * dy_dt - dx_dt * d2y_dt2) / (
dx_dt * dx_dt + dy_dt * dy_dt)**1.5
dx_dt = np.gradient(valleys)
dy_dt = np.gradient(signal_smooth[valleys])
d2x_dt2 = np.gradient(dx_dt)
d2y_dt2 = np.gradient(dy_dt)
valley_curvature = np.abs(d2x_dt2 * dy_dt - dx_dt * d2y_dt2) / (
dx_dt * dx_dt + dy_dt * dy_dt)**1.5
mean_curv_pos_over_mean_curv_neg = peak_curvature.mean(
) / valley_curvature.mean()
dx_dt = np.gradient(vertices)
dy_dt = np.gradient(signal_smooth[vertices])
d2x_dt2 = np.gradient(dx_dt)
d2y_dt2 = np.gradient(dy_dt)
curvature = np.abs(d2x_dt2 * dy_dt -
dx_dt * d2y_dt2) / (dx_dt * dx_dt + dy_dt * dy_dt)**1.5
seconds = len(signal_smooth
) / 2000.0 # 2000hz sample rate and signal is 4400 samples
vertices_per_second = len(signal_smooth[vertices] / seconds)
selected_period = np.array(vertices[::2])
vertices_period = np.subtract(selected_period[1::], selected_period[:-1:])
hysteresis = abs(0.25 * AMSD)
mean = signal_smooth.mean()
shifted_signal = signal_smooth - mean
hysterisized_signal = hyst(shifted_signal, -hysteresis, hysteresis)
zero_crossing_count = (np.diff(hysterisized_signal) != 0).sum()
CTMXMN = zero_crossing_count / seconds
return np.array([
curvature.mean(),
curvature.std(),
variation(curvature), vertices_per_second,
vertices_period.std(),
variation(vertices_period), CTMXMN, mean_curv_pos_over_mean_curv_neg
])
def get_variation(img):
path = images_path + img
img = cv2.imread(path)
hist_b = cv2.calcHist([img], [0], None, [256], [0, 256])
hist_g = cv2.calcHist([img], [1], None, [256], [0, 256])
hist_r = cv2.calcHist([img], [2], None, [256], [0, 256])
var_b = variation(hist_b)
var_g = variation(hist_g)
var_r = variation(hist_r)
return [var_r[0], var_g[0], var_b[0]]
def cal_vc(data):
""" Calculate variation coefficient
Args:
data: dataset
Returns:
variation coefficient score
"""
from scipy import stats
#
mats = np.zeros((1,len(data)))
mats[0,1] = sum(data)
max_v = stats.variation(mats.ravel())
min_v = 0
rst = (stats.variation(data) - min_v) / (max_v - min_v)
return rst
def rateSampleByVariation(chunks):
"""
Rates an audio sample using the coefficient of variation of its short-term
energy.
"""
energy = [shortTermEnergy(chunk) for chunk in chunks]
return stats.variation(energy)
def test_propagate_nan(self):
# Check that the shape of the result is the same for inputs
# with and without nans, cf gh-5817
a = np.arange(8).reshape(2, -1).astype(float)
a[1, 0] = np.nan
v = variation(a, axis=1, nan_policy="propagate")
assert_allclose(v, [np.sqrt(5 / 4) / 1.5, np.nan], atol=1e-15)
def compute_coef_var(image, x_start, x_end, y_start, y_end):
"""
Compute coefficient of variation in a window of [x_start: x_end] and
[y_start:y_end] within the image.
"""
if x_start < 0: raise Exception('ERROR: x_start must be >= 0.')
if y_start < 0: raise Exception('ERROR: y_start must be >= 0.')
x_size, y_size = image.shape
x_overflow = x_end > x_size
y_overflow = y_end > y_size
if x_overflow:
raise Exception('ERROR: invalid parameters cause x window overflow.')
if y_overflow:
raise Exception('ERROR: invalid parameters cause y window overflow.')
window = image[x_start:x_end, y_start:y_end]
coef_var = variation(window, None)
if not coef_var: # dirty patch
coef_var = 0.01
# print "squared_coef was equal zero but replaced by %s" % coef_var
if coef_var <= 0:
raise Exception('ERROR: coeffient of variation cannot be zero.')
return coef_var
def get_statistics(self, vec):
expStats = {
# "position": {
"N": len(vec),
"mean": np.mean(vec),
"median": np.median(vec),
"q1": np.percentile(vec, 25),
"q3": np.percentile(vec, 75),
# },
# "spread": {
"range": np.ptp(vec),
"variance": np.var(vec),
"std": np.std(vec),
"iqr": stats.iqr(vec),
"mad": stats.median_absolute_deviation(vec),
"cv": stats.variation(vec),
"mad/median": stats.median_absolute_deviation(vec)/np.median(vec),
"iqr/median": stats.iqr(vec)/np.median(vec),
# },
# "distribution": {
# "log_histogram": np.histogram(np.log(vec))
# }
}
for stat in expStats:
expStats[stat] = round(expStats[stat], 2)
return expStats
def _aggregate_data_per_lane(self):
self.lanes_info=defaultdict(Info)
for barcode_info in self.barcodes_info.values():
lane=barcode_info[ELEMENT_LANE]
self.lanes_info[lane]+=barcode_info
#add ELEMENT_PC_READ_IN_LANE to barcode info
for barcode_info in self.barcodes_info.values():
nb_reads_lane = self.lanes_info[barcode_info[ELEMENT_LANE]][ELEMENT_NB_READS_PASS_FILTER]
if nb_reads_lane:
barcode_info[ELEMENT_PC_READ_IN_LANE]=float(barcode_info[ELEMENT_NB_READS_PASS_FILTER])/float(nb_reads_lane)
else:
barcode_info[ELEMENT_PC_READ_IN_LANE]=''
#add ELEMENT_LANE_COEFF_VARIATION to lane_info
nb_reads_per_lane = defaultdict(list)
for barcode_info in self.barcodes_info.values():
if barcode_info[ELEMENT_BARCODE] != 'unknown' and barcode_info[ELEMENT_NB_READS_PASS_FILTER]:
nb_reads_per_lane[barcode_info[ELEMENT_LANE]].append(barcode_info[ELEMENT_NB_READS_PASS_FILTER])
for lane in self.lanes_info:
if nb_reads_per_lane.get(lane):
self.lanes_info[lane][ELEMENT_LANE_COEFF_VARIATION] = variation(nb_reads_per_lane.get(lane))
#add ELEMENT_PC_READ_IN_LANE to barcode info
for barcode_info in self.unexpected_barcode_info.values():
nb_reads_lane = self.lanes_info[barcode_info[ELEMENT_LANE]][ELEMENT_NB_READS_PASS_FILTER]
if nb_reads_lane:
barcode_info[ELEMENT_PC_READ_IN_LANE]=float(barcode_info[ELEMENT_NB_READS_PASS_FILTER])/float(nb_reads_lane)
else:
barcode_info[ELEMENT_PC_READ_IN_LANE]=''
def test_variation(self):
"""
variation = samplestd/mean """
## y = stats.variation(self.shoes[0])
## assert_approx_equal(y,21.8770668)
y = stats.variation(self.testcase)
assert_approx_equal(y,0.44721359549996, 10)
def MCV(data_df, N, columns, n = 4, S=1):
data_array = np.array(data_df[columns])
mcv_array = data_array.copy()
c = data_array.copy()
c1 = data_array.copy()
c1index = np.array([[i,i] for i in range(len(data_array))])
average = data_array.copy()
broad = broadcasting_array(data_array, L=N+2, S=S)
c[math.ceil(N/2):-math.ceil(N/2)]=np.array(variation(broad, axis = 1)) #luego se itera para reemplazar los primeros y últimos según los demás parámetros
'''
N: posición en la que se identifica el transiente en real_time_disag
el número de posiciones fijas debe ser mayor a en las que calcula el c1 index para que no se estanque el dataframe y pueda propagarse
Esto es, c1 y c1index deben estar en otro ciclo
'''
for i in range(0,len(data_df)):
if (i < n) or (i > (len(data_df)- (math.ceil(N/2)) -1)):
c[i] = np.fabs(data_df[columns].iloc[i]) + 10 #para asegurarse que estas posiciones nunca tengan el menor coeficiente de variación
if (i < n) or (i >= (len(data_df)- (2*math.ceil(N/2)) -1)): #El límite superior es para asegurar propagación de la variable
mcv_array[i] = data_df[columns].iloc[i]
#v = data_df[columns].iloc[i]
c1[i] = c[i]
c1index[i] =i
average[i] = data_df[columns].iloc[i]
broad_c = broadcasting_array(c, L=N+2, S=S)
c1[math.ceil(N/2):-math.ceil(N/2)] = np.min(broad_c, axis = 1)
c1index[math.ceil(N/2):-math.ceil(N/2)] = -(math.ceil(N/2)) + np.argmin(broad_c, axis = 1)
for i in range(N//2,len(data_df)-math.ceil(N/2)+1):
c1index[i] = i + c1index[i]
for i in range(0,n): #restaurar hasta n valores anteriores
c[i] = np.fabs(data_df[columns].iloc[i]) + 10 #para asegurarse que estas posiciones nunca tengan el menos coeficiente de variación
c1[i] = c[i]
c1index[i] =i
for i in range(len(data_df)- (math.ceil(N/2)) ,len(data_df)):
c1[i] = c[i]
c1index[i] =i
broad_c1index = broadcasting_array(c1index, L=N+2, S=S)
data_broadcast = [data_array[[int(broad_c1index[j][i][0]) for i in range(N+2)]] for j in range(len(broad_c1index))]
average[math.ceil(N/2):-math.ceil(N/2)] = np.median(data_broadcast, axis = 1)
for i in range(0, n): #restaurar hasta n valores anteriores
average[i] = data_df[columns].iloc[i]
for i in range(len(data_df)- (2*math.ceil(N/2)) -1,len(data_df)):
average[i] = data_df[columns].iloc[i]
df = pd.DataFrame(average, index= data_df.index, columns= columns)
return df
def stats(values, return_list = False):
"""
Accepts a list of values (not events) and processes the data. Will return the stats
in a dictionary.
"""
import numpy
from numpy import mean, exp, median, std, log
from scipy.stats import mode, variation, scoreatpercentile, skew, kurtosis
stat_dict = {}
n = float(len(values))
keys = ['amean','gmean','median','mode','stdev','cv','iqr','rcv','skew','kurt']
stat_dict[keys[0]] = mean(values)
stat_dict[keys[1]] = exp(mean([log(value) for value in values]))
stat_dict[keys[2]] = median(values)
stat_dict[keys[3]] = int(mode(values)[0])
stat_dict[keys[4]] = std(values)
stat_dict[keys[5]] = variation(values)
stat_dict[keys[6]] = scoreatpercentile(values,per = 75) - scoreatpercentile(values,per = 25)
stat_dict[keys[7]] = 0.75*stat_dict['iqr'] / stat_dict['median']
stat_dict[keys[8]] = skew(values)
stat_dict[keys[9]] = kurtosis(values)
if return_list:
return [stat_dict[key] for key in keys]
return stat_dict
def compute_profile(self):
self.rec.label_contours(self.ji_intervals)
distributions = {}
for key, segments in self.rec.contour_labels.items():
distributions[key] = []
for indices in segments:
distributions[key].extend(self.pitch_obj.pitch[indices[0]:indices[1]])
parameters = {}
for interval, distribution in distributions.items():
distribution = np.array(distribution)
#TODO: replace -10000 with whatever the bound is for invalid pitch values in cent scale
distribution = distribution[distribution >= -10000]
[n, be] = np.histogram(distribution, bins=1200)
bc = (be[1:] + be[:-1])/2.0
peak_pos = bc[np.argmax(n)]
peak_mean = float(np.mean(distribution))
peak_variance = float(variation(distribution))
peak_skew = float(skew(distribution))
peak_kurtosis = float(kurtosis(distribution))
pearson_skew = float(3.0 * (peak_mean - peak_pos) / np.sqrt(abs(peak_variance)))
parameters[interval] = {"position": float(peak_pos),
"mean": peak_mean,
"amplitude": float(max(n)),
"variance": peak_variance,
"skew1": peak_skew,
"skew2": pearson_skew,
"kurtosis": peak_kurtosis}
all_amps = [parameters[interval]["amplitude"] for interval in parameters.keys()]
peak_amp_sum = sum(all_amps)
for interval in parameters.keys():
parameters[interval]["amplitude"] = parameters[interval]["amplitude"]/peak_amp_sum
self.intonation_profile = parameters
def smooth_curvatures(C, cvtarget, tolerance=10):
"""
Smoothes a curvature signal until the coefficient of variation of its
differenced curvatures is within tolerance percent.
"""
from scipy.stats import variation
smoothstep = int(len(C) / 100)
window = smoothstep
if window % 2 == 0: # Window must be odd
window = window + 1
cv = 10000
while abs((cv - cvtarget) / cv * 100) > tolerance:
Cs = signal.savgol_filter(C,
window_length=window,
polyorder=3,
mode='interp')
cv = variation(np.diff(Cs))
window = window + smoothstep
if window % 2 == 0: # Window must be odd
window = window + 1
if window > len(C) / 2:
print('Could not find solution.')
return Cs
return Cs
def st_dev():
from statistics import pstdev, mean,median,mode, pvariance
from scipy import stats
from matplotlib import pyplot as plt
entry=[]
sizeplt=[]
count=0
size =int(input("Enter number of days: "))
while count<size:
val = int(input("Please enter {}. day cases: ".format(count+1)))
entry.append(val)
count += 1
print("Mean is: ",(mean(entry)))
print("Variance is:", (pvariance(entry)))
print("Standard Deviation is:", (pstdev(entry)))
print("Mode is:", (mode(entry)))
print("Coefficient of Variation:",stats.variation(entry))
print("Z Scores are:",stats.zscore(entry))
print("Median is:", (median(entry)))
for z in range(1,len(entry)+1):
sizeplt.append(z)
plt.plot(sizeplt,entry)
plt.title("Turkey Covid-19 Daily Date Information")
plt.xlabel("Day")
plt.ylabel("Cases")
plt.show()
def doDBSCAN(data):
#mykmeans = KMeans(n_clusters=2)
myDBSCAN = DBSCAN(eps=stats.variation(data)*0.3, min_samples=len(data)*0.5).fit(data)
n_clusters_ = len(set(myDBSCAN.labels_)) - (1 if -1 in myDBSCAN.labels_ else 0)
print myDBSCAN.labels_
print sum(myDBSCAN.labels_)
print "nclusters:", n_clusters_
def get_stock_COV():
tickers = load_tickers('sp500.csv')
tickers.append('SPY') # used for comparison, SPDR market
coefficient_of_variations = []
errors = []
for ticker in tickers:
past_year_prices = []
url = (
"https://financialmodelingprep.com/api/v3/historical-price-full/" +
ticker + "?timeseries=365")
response = urlopen(url)
data = response.read().decode("utf-8")
json_data = json.loads(data)
try:
print("CALCULATING COV FOR: ", ticker)
for day_price in json_data['historical']:
past_year_prices.append(day_price['close'])
except:
print("ISSUE WITH: ", ticker)
errors.append(ticker)
continue
coefficient_of_variations.append([ticker, variation(past_year_prices)])
print(errors)
print(coefficient_of_variations)
pickle.dump(coefficient_of_variations, open("COV.p", "wb"))
def _str_for_pred_stats(y_test, y_pred, spf, prec):
""" Computes the predictive statistics for the given value arrays. It
returns a string representation that corresponds to a table with field size
`spf`.
Args:
y_test (ndarray, shape=(nvals,)): True values
y_pred (ndarray, shape=(nvals,)): Predicted values
spf (int): Space per table field.
prec (int): Precision of floating point numbers.
Returns:
str: String representation for the statistics.
"""
bias = np.mean(y_pred - y_test)
cv = variation(y_pred)
mu = STD_FACT * np.sqrt(cv**2 + bias**2)
rmse = np.sqrt(mean_squared_error(y_test, y_pred))
r2 = r2_score(y_test, y_pred)
return f'{bias:^{spf}.{prec}f}|' \
f'{rmse:^{spf}.{prec}f}|' \
f'{mu:^{spf}.{prec}f}|' \
f'{r2:^{spf}.{prec}f}|'
def test_variation(self):
"""
variation = samplestd/mean """
## y = stats.variation(self.shoes[0])
## assert_approx_equal(y,21.8770668)
y = stats.variation(self.testcase)
assert_approx_equal(y, 0.44721359549996, 10)
def print_stats(datums):
print 'Mean:', stats.tmean(datums)
print 'Median:', stats.cmedian(datums)
print 'Std Dev:', stats.tstd(datums)
print 'Variation:', stats.variation(datums)
print 'Kurtosis:', stats.kurtosis(datums, fisher=False)
print 'Skewness:', stats.skew(datums)
def compute_coef_var(image, x_start, x_end, y_start, y_end):
"""
Compute coefficient of variation in a window of [x_start: x_end] and
[y_start:y_end] within the image.
"""
assert x_start >= 0, 'ERROR: x_start must be >= 0.'
assert y_start >= 0, 'ERROR: y_start must be >= 0.'
x_size, y_size = image.shape
x_overflow = x_end > x_size
y_overflow = y_end > y_size
assert not x_overflow, 'ERROR: invalid parameters cause x window overflow.'
assert not y_overflow, 'ERROR: invalid parameters cause y window overflow.'
window = image[x_start:x_end, y_start:y_end]
coef_var = variation(window, None)
if not coef_var: # dirty patch
coef_var = COEF_VAR_DEFAULT
# print "squared_coef was equal zero but replaced by %s" % coef_var
assert coef_var > 0, 'ERROR: coeffient of variation cannot be zero.'
return coef_var
def compute_coef_var(image, x_start, x_end, y_start, y_end):
"""
Compute coefficient of variation in a window of [x_start: x_end] and
[y_start:y_end] within the image.
"""
assert x_start >= 0, 'ERROR: x_start must be >= 0.'
assert y_start >= 0, 'ERROR: y_start must be >= 0.'
x_size, y_size = image.shape
x_overflow = x_end > x_size
y_overflow = y_end > y_size
assert not x_overflow, 'ERROR: invalid parameters cause x window overflow.'
assert not y_overflow, 'ERROR: invalid parameters cause y window overflow.'
window = image[x_start:x_end, y_start:y_end]
coef_var = variation(window, None)
if not coef_var: # dirty patch
coef_var = COEF_VAR_DEFAULT
# print "squared_coef was equal zero but replaced by %s" % coef_var
assert coef_var > 0, 'ERROR: coeffient of variation cannot be zero.'
return coef_var
def readFpkmData(dataName, delmited):
with open(dataName) as csvfile:
data=[]
reader = csv.reader(csvfile, delimiter=delmited)
for row in reader:
data.append(row)
sampleList=[]
geneDict={}
cvDict={}
for j in range(1,len(data[1])):
sampleList.append({})
for i in range(1,len(data)):
tempDatalist=[]
maxdata=0
for j in range(1,len(data[i])):
currentDataPoint=float(data[i][j])
tempDatalist.append(currentDataPoint)
maxdata=max(tempDatalist)
cvDict[data[i][0]]=variation(tempDatalist)
if maxdata==0:
maxdata=1.
geneDict[data[i][0]]=[itemer/maxdata for itemer in tempDatalist]
for j in range(0,len(data[i])-1):
sampleList[j][str.upper(data[i][0])]=float(data[i][1])/maxdata
return sampleList, geneDict, cvDict
def assess_fold_performance(self) -> None:
"""Calculate Coefficient of Variation of model performance of clusters
for each iteration.
==Precondition==:
- store_cluster_results has been called.
"""
# Get Fold Mean Accuracy for Plotting [Regression vs. Classification]
if self._inputs.model_goal == "regression":
def regression_error(x):
"""Return regression error between prediction and label"""
return np.sqrt(((x.predictions - x.labels)**2))
self._inputs.df_test[
"pred_performance"] = self._inputs.df_test.apply(
regression_error, axis=1)
else:
self._inputs.df_test["pred_performance"] = (
self._inputs.df_test.predictions == self._inputs.df_test.labels
)
self.mean_performance = self._inputs.df_test["pred_performance"].mean()
# PREPROCESSING: Get CV of Cluster Accuracies
cluster_performances_flattened = np.array([])
cv_accuracy = np.array([])
for arr in self.cluster_performances:
cluster_performances_flattened = np.append(
cluster_performances_flattened, arr)
cv_accuracy = np.append(cv_accuracy, variation(arr))
self.cv_performance = cv_accuracy
self._cluster_performance_flattened = cluster_performances_flattened
def bluevar(self):
"""x=bluevar(): returns the variation in brightness within the blue channel of an RGB image"""
if self.threed==True:
blue=self.image[:,:,2]
flat = [x for sublist in blue for x in sublist]
bluevar=variation(flat)
return bluevar
else:
return float(0)
def read_energy(name):
a = []
f = open(name, 'r')
for l in f:
s = l.strip()
if(s[0] != 'f'):
a += [float(s.split(';')[2])]
var = stats.variation(a)
return [var]*13
def barcode_variation_apply_fn(row, barcode_data, mapping):
"""
:py:meth:`pandas.DataFrame.apply` function for calculating the coefficient
of variation for a variant's barcodes.
"""
bc_scores = barcode_data.ix[mapping.variants[row.name]]['score']
bc_scores = bc_scores[np.invert(np.isnan(bc_scores))]
cv = stats.variation(bc_scores)
return pd.Series({'scored.unique.barcodes' : len(bc_scores), \
'barcode.cv' : cv})
def main(argv):
### Put the arguments in variables.
traceFilename = ''
try:
opts, args = getopt.getopt(argv,"hf:",["tracefile="])
except getopt.GetoptError:
print 'scriptGetInterarrivalsSummaryStatistics.py -f <tracefile>'
sys.exit(2)
for opt, arg in opts:
if opt == '-h':
print 'scriptGetInterarrivalsSummaryStatistics.py -f <tracefile>'
sys.exit()
elif opt in ("-f", "--tracefile"):
traceFilename = arg
if traceFilename == '':
print 'ERROR: Must specify a trace filename.'
print 'scriptGetInterarrivalsSummaryStatistics.py -f <tracefile>'
sys.exit(1)
### Create the interarrival dictionary
interarrival = {}
file = open(traceFilename + "-IndiceLeido", "a")
### Open the file in read mode, and parse each line to obtain the timestamp,
### the command, and the id.
with open (traceFilename, "r") as traceFile:
reader = csv.reader(traceFile, delimiter=' ')
for line in reader:
file.write(line[0]+'\n')
if line[2] in interarrival:
with open(traceFilename + "-interarrivals/it-" + line[2] + ".txt", "a") as myfile:
myfile.write(str((float(line[0])*1000)-interarrival[line[2]][0])+'\n')
interarrival[line[2]] = [(float(line[0])*1000)]
file.close()
### Calculate the summary statistics for each key with more than 2 interarrivals.
### print 'id mean median mid-range gmean hmedian std iqr range mad coeficiente_variacion skewness kurtosis'
### + str(stats.hmean(v[2:])) + ' ' \
print 'id mean median mid-range gmean std iqr range mad coeficiente_variacion skewness kurtosis'
for k, t in interarrival.iteritems():
if os.path.isfile(traceFilename + '-interarrivals/it-' + k + '.txt'):
v = [float(line) for line in open(traceFilename + '-interarrivals/it-' + k + '.txt')]
if len(v) > 1:
print k + ' ' + str(numpy.mean(v)) + ' ' \
+ str(numpy.median(v)) + ' ' \
+ str((numpy.max(v)-numpy.min(v))/2) + ' ' \
+ str(stats.mstats.gmean(v)) + ' ' \
+ str(numpy.std(v)) + ' ' \
+ str(numpy.subtract(*numpy.percentile(v, [75, 25]))) + ' ' \
+ str(numpy.ptp(v)) + ' ' \
+ str(mad(v)) + ' ' \
+ str(stats.variation(v)) + ' ' \
+ str(stats.skew(v)) + ' ' \
+ str(stats.kurtosis(v))
def according_coefficient_variation_delete(data, features):
waiting_to_delete = np.array(load_result("complex_value_features.csv"))
waiting_to_delete = waiting_to_delete.reshape((waiting_to_delete.size,))
#print(waiting_to_delete)
indexs = get_known_features_index(features, waiting_to_delete)
coefficient_variation_info = OrderedDict()
for fea_pos in indexs:
try:
coefficient_variation_fea = stats.variation(data[:, fea_pos])
coefficient_variation_info[features[fea_pos]] = coefficient_variation_fea
except:
pass
return coefficient_variation_info
def extract(self, instance):
assert(isinstance(instance, Instance))
dndata = instance.eeg_data
kurtosis = st.kurtosis(dndata, axis=1)
skew = st.skew(dndata, axis=1)
# coefficient of variation
variation = st.variation(dndata, axis=1)
# hstack will collapse all entries into one big vector
features = np.hstack( (kurtosis, skew, variation) )
self.assert_features(features)
# features = a 1d ndarray
return features
def get_hmsi(spikes, hmsi_bin, file_path, title=""):
intervals = np.diff( spikes, n=1 )
intervals = intervals[ np.abs(intervals - np.mean(intervals)) < 3*np.std(intervals) ]
cv = stats.variation(intervals) # np.sqrt(np.std(intervals)) / np.mean(intervals) #
numBins = 100
fig = plt.figure()
ax = fig.add_subplot(111)
hmsi, bins, _ = ax.hist(intervals, numBins, color='green', alpha=0.8, normed=True)
ax.set_title("HMSI " + title)
fig.savefig(file_path, dpi=500)
plt.show(block=False)
plt.close(fig)
#hmsi, bins = np.histogram(intervals, numBins, density=True)
return bins, hmsi, cv
def compute_statistics(self): price_expectations = dict((k, []) for k in range(0, self.kinds_of_capital)) for capital_firm in self.economy.capital_firms: if capital_firm.error_capital_price_expectation != None: self.errors_expectations_capital_price[capital_firm.capital_type].append(capital_firm.error_capital_price_expectation) price_expectations[capital_firm.capital_type].append(capital_firm.expected_price) for capital in xrange(self.kinds_of_capital): self.variation_price_expectation[capital] = stats.variation(price_expectations[capital]) for capital in xrange(self.kinds_of_capital): self.errors_expectations_capital_price_economy[capital] = np.mean(self.errors_expectations_capital_price[capital]) for goods_firm in self.economy.goods_firms: """ record the stock of different kinds of capital held by different capital firms in the economy""" for capital in xrange(self.kinds_of_capital): self.stock_capital[capital].append(goods_firm.capital_stock[capital]) for capital in xrange(self.kinds_of_capital): self.stock_capital_economy[capital] = np.sum(self.stock_capital[capital]) for capital in xrange(self.kinds_of_capital): self.mean_price_capital[capital] = np.mean(self.prices_capital[capital])
def weighting(window, cu=CU_DEFAULT):
"""
Computes the weighthing function for Kuan filter using cu as the noise
coefficient.
"""
two_cu = cu * cu
ci = variation(window, None)
two_ci = ci * ci
if not two_ci: # dirty patch to avoid zero division
two_ci = COEF_VAR_DEFAULT
divisor = 1.0 + two_cu
if not divisor:
divisor = 0.0001
if cu > ci:
w_t = 0.0
else:
w_t = (1.0 - (two_cu / two_ci)) / divisor
return w_t
quit()
means = []
COVs = []
FanoFactors = []
for key, value in dict.iteritems():
# print key, value
bdf = pd.DataFrame(value)
# print(bdf.shape)
bdf1 = pd.DataFrame.transpose(bdf)
df_sum = bdf1.sum(axis = 1)
# print(bdf.shape, np.mean(df_sum), sp.variation(df_sum))
means.append(np.mean(df_sum))
COVs.append(sp.variation(df_sum))
FanoFactors.append((np.std(df_sum)**2)/np.mean(df_sum))
means_COV = np.column_stack((means, COVs, FanoFactors))
# print(means_COV)
means_COV_df = pd.DataFrame(means_COV, index = dict.keys())
# means_COV_df['Barcodes', 'Experiments', 'States'] = [re.findall("\d+",key) for key in dict.keys()]
means_COV_df['Barcodes'] = [int(re.findall("\d+",key)[0]) for key in dict.keys()]
means_COV_df['Experiments'] = [int(re.findall("\d+",key)[1]) for key in dict.keys()]
means_COV_df['States'] = [int(re.findall("\d+",key)[2]) for key in dict.keys()]
# means_COV_df['Barcodes'] = [int(i[0]) for i in bd_nums]
# means_COV_df['Experiments'] = [int(j[1]) for j in bd_nums]
# means_COV_df['States'] = [int(k[2]) for k in bd_nums]
means_COV_df.columns = ['Mean', 'COV', 'FanoFactor', 'Barcodes', 'Experiments', 'States']
# means_COV_df.sort_values(by='COV')
#for
#print len(timeList)
#print len(routerAverages)
#plt.plot(timeList,routerAverages)
varList = []
i = 1
variations = []
myTimeList = []
#timeList
for average in routerAverages:
varList.append(average)
if i%(10)==0:
variations.append(stats.variation(varList))
varList = []
myTimeList.append(i*100)
i += 1
print variations
#plt.xlabel('simTime')
#plt.ylabel('router Average Util')
#plt.show()
plt.plot(myTimeList,variations)
plt.xlabel('simTime Batches')
def parametrize_peaks(self, intervals, max_peakwidth=50, min_peakwidth=25, symmetric_bounds=True):
"""
Computes and stores the intonation profile of an audio recording.
:param intervals: these will be the reference set of intervals to which peak positions
correspond to. For each interval, the properties of corresponding peak, if exists,
will be computed and stored as intonation profile.
:param max_peakwidth: the maximum allowed width of the peak at the base for computing
parameters of the distribution.
:param min_peakwidth: the minimum allowed width of the peak at the base for computing
parameters of the distribution.
"""
assert isinstance(self.pitch_obj.pitch, np.ndarray)
valid_pitch = self.pitch_obj.pitch
valid_pitch = [i for i in valid_pitch if i > -10000]
valid_pitch = np.array(valid_pitch)
parameters = {}
for i in xrange(len(self.histogram.peaks["peaks"][0])):
peak_pos = self.histogram.peaks["peaks"][0][i]
#Set left and right bounds of the distribution.
max_leftbound = peak_pos - max_peakwidth
max_rightbound = peak_pos + max_peakwidth
leftbound = max_leftbound
rightbound = max_rightbound
nearest_valleyindex = utils.find_nearest_index(self.histogram.peaks["valleys"][0], peak_pos)
if peak_pos > self.histogram.peaks["valleys"][0][nearest_valleyindex]:
leftbound = self.histogram.peaks["valleys"][0][nearest_valleyindex]
if len(self.histogram.peaks["valleys"][0][nearest_valleyindex + 1:]) == 0:
rightbound = peak_pos + max_peakwidth
else:
offset = nearest_valleyindex + 1
nearest_valleyindex = utils.find_nearest_index(
self.histogram.peaks["valleys"][0][offset:], peak_pos)
rightbound = self.histogram.peaks["valleys"][0][offset + nearest_valleyindex]
else:
rightbound = self.histogram.peaks["valleys"][0][nearest_valleyindex]
if len(self.histogram.peaks["valleys"][0][:nearest_valleyindex]) == 0:
leftbound = peak_pos - max_peakwidth
else:
nearest_valleyindex = utils.find_nearest_index(
self.histogram.peaks["valleys"][0][:nearest_valleyindex], peak_pos)
leftbound = self.histogram.peaks["valleys"][0][nearest_valleyindex]
#In terms of x-axis, leftbound should be at least min_peakwidth
# less than peak_pos, and at max max_peakwidth less than peak_pos,
# and viceversa for the rightbound.
if leftbound < max_leftbound:
leftbound = max_leftbound
elif leftbound > peak_pos - min_peakwidth:
leftbound = peak_pos - min_peakwidth
if rightbound > max_rightbound:
rightbound = max_rightbound
elif rightbound < peak_pos + min_peakwidth:
rightbound = peak_pos + min_peakwidth
#If symmetric bounds are asked for, then make the bounds symmetric
if symmetric_bounds:
if peak_pos - leftbound < rightbound - peak_pos:
imbalance = (rightbound - peak_pos) - (peak_pos - leftbound)
rightbound -= imbalance
else:
imbalance = (peak_pos - leftbound) - (rightbound - peak_pos)
leftbound += imbalance
#extract the distribution and estimate the parameters
distribution = valid_pitch[valid_pitch >= leftbound]
distribution = distribution[distribution <= rightbound]
#print peak_pos, "\t", len(distribution), "\t", leftbound, "\t", rightbound
interval_index = utils.find_nearest_index(intervals, peak_pos)
interval = intervals[interval_index]
_mean = float(np.mean(distribution))
_variance = float(variation(distribution))
_skew = float(skew(distribution))
_kurtosis = float(kurtosis(distribution))
pearson_skew = float(3.0 * (_mean - peak_pos) / np.sqrt(abs(_variance)))
parameters[interval] = {"position": float(peak_pos),
"mean": _mean,
"amplitude": float(self.histogram.peaks["peaks"][1][i]),
"variance": _variance,
"skew1": _skew,
"skew2": pearson_skew,
"kurtosis": _kurtosis}
self.intonation_profile = parameters
def main():
parser = argparse.ArgumentParser()
parser.add_argument("-i", "--infile", required=True, help="Tabular file.")
parser.add_argument("-o", "--outfile", required=True, help="Path to the output file.")
parser.add_argument("--sample_one_cols", help="Input format, like smi, sdf, inchi")
parser.add_argument("--sample_two_cols", help="Input format, like smi, sdf, inchi")
parser.add_argument("--sample_cols", help="Input format, like smi, sdf, inchi,separate arrays using ;")
parser.add_argument("--test_id", help="statistical test method")
parser.add_argument(
"--mwu_use_continuity",
action="store_true",
default=False,
help="Whether a continuity correction (1/2.) should be taken into account.",
)
parser.add_argument(
"--equal_var",
action="store_true",
default=False,
help="If set perform a standard independent 2 sample test that assumes equal population variances. If not set, perform Welch's t-test, which does not assume equal population variance.",
)
parser.add_argument(
"--reta", action="store_true", default=False, help="Whether or not to return the internally computed a values."
)
parser.add_argument("--fisher", action="store_true", default=False, help="if true then Fisher definition is used")
parser.add_argument(
"--bias",
action="store_true",
default=False,
help="if false,then the calculations are corrected for statistical bias",
)
parser.add_argument("--inclusive1", action="store_true", default=False, help="if false,lower_limit will be ignored")
parser.add_argument(
"--inclusive2", action="store_true", default=False, help="if false,higher_limit will be ignored"
)
parser.add_argument("--inclusive", action="store_true", default=False, help="if false,limit will be ignored")
parser.add_argument(
"--printextras",
action="store_true",
default=False,
help="If True, if there are extra points a warning is raised saying how many of those points there are",
)
parser.add_argument(
"--initial_lexsort",
action="store_true",
default="False",
help="Whether to use lexsort or quicksort as the sorting method for the initial sort of the inputs.",
)
parser.add_argument("--correction", action="store_true", default=False, help="continuity correction ")
parser.add_argument(
"--axis",
type=int,
default=0,
help="Axis can equal None (ravel array first), or an integer (the axis over which to operate on a and b)",
)
parser.add_argument(
"--n",
type=int,
default=0,
help="the number of trials. This is ignored if x gives both the number of successes and failures",
)
parser.add_argument("--b", type=int, default=0, help="The number of bins to use for the histogram")
parser.add_argument("--N", type=int, default=0, help="Score that is compared to the elements in a.")
parser.add_argument("--ddof", type=int, default=0, help="Degrees of freedom correction")
parser.add_argument("--score", type=int, default=0, help="Score that is compared to the elements in a.")
parser.add_argument("--m", type=float, default=0.0, help="limits")
parser.add_argument("--mf", type=float, default=2.0, help="lower limit")
parser.add_argument("--nf", type=float, default=99.9, help="higher_limit")
parser.add_argument(
"--p",
type=float,
default=0.5,
help="The hypothesized probability of success. 0 <= p <= 1. The default value is p = 0.5",
)
parser.add_argument("--alpha", type=float, default=0.9, help="probability")
parser.add_argument("--new", type=float, default=0.0, help="Value to put in place of values in a outside of bounds")
parser.add_argument(
"--proportiontocut",
type=float,
default=0.0,
help="Proportion (in range 0-1) of total data set to trim of each end.",
)
parser.add_argument(
"--lambda_",
type=float,
default=1.0,
help="lambda_ gives the power in the Cressie-Read power divergence statistic",
)
parser.add_argument(
"--imbda",
type=float,
default=0,
help="If lmbda is not None, do the transformation for that value.If lmbda is None, find the lambda that maximizes the log-likelihood function and return it as the second output argument.",
)
parser.add_argument("--base", type=float, default=1.6, help="The logarithmic base to use, defaults to e")
parser.add_argument("--dtype", help="dtype")
parser.add_argument("--med", help="med")
parser.add_argument("--cdf", help="cdf")
parser.add_argument("--zero_method", help="zero_method options")
parser.add_argument("--dist", help="dist options")
parser.add_argument("--ties", help="ties options")
parser.add_argument("--alternative", help="alternative options")
parser.add_argument("--mode", help="mode options")
parser.add_argument("--method", help="method options")
parser.add_argument("--md", help="md options")
parser.add_argument("--center", help="center options")
parser.add_argument("--kind", help="kind options")
parser.add_argument("--tail", help="tail options")
parser.add_argument("--interpolation", help="interpolation options")
parser.add_argument("--statistic", help="statistic options")
args = parser.parse_args()
infile = args.infile
outfile = open(args.outfile, "w+")
test_id = args.test_id
nf = args.nf
mf = args.mf
imbda = args.imbda
inclusive1 = args.inclusive1
inclusive2 = args.inclusive2
sample0 = 0
sample1 = 0
sample2 = 0
if args.sample_cols != None:
sample0 = 1
barlett_samples = []
for sample in args.sample_cols.split(";"):
barlett_samples.append(map(int, sample.split(",")))
if args.sample_one_cols != None:
sample1 = 1
sample_one_cols = args.sample_one_cols.split(",")
if args.sample_two_cols != None:
sample_two_cols = args.sample_two_cols.split(",")
sample2 = 1
for line in open(infile):
sample_one = []
sample_two = []
cols = line.strip().split("\t")
if sample0 == 1:
b_samples = columns_to_values(barlett_samples, line)
if sample1 == 1:
for index in sample_one_cols:
sample_one.append(cols[int(index) - 1])
if sample2 == 1:
for index in sample_two_cols:
sample_two.append(cols[int(index) - 1])
if test_id.strip() == "describe":
size, min_max, mean, uv, bs, bk = stats.describe(map(float, sample_one))
cols.append(size)
cols.append(min_max)
cols.append(mean)
cols.append(uv)
cols.append(bs)
cols.append(bk)
elif test_id.strip() == "mode":
vals, counts = stats.mode(map(float, sample_one))
cols.append(vals)
cols.append(counts)
elif test_id.strip() == "nanmean":
m = stats.nanmean(map(float, sample_one))
cols.append(m)
elif test_id.strip() == "nanmedian":
m = stats.nanmedian(map(float, sample_one))
cols.append(m)
elif test_id.strip() == "kurtosistest":
z_value, p_value = stats.kurtosistest(map(float, sample_one))
cols.append(z_value)
cols.append(p_value)
elif test_id.strip() == "variation":
ra = stats.variation(map(float, sample_one))
cols.append(ra)
elif test_id.strip() == "itemfreq":
freq = stats.itemfreq(map(float, sample_one))
for list in freq:
elements = ",".join(map(str, list))
cols.append(elements)
elif test_id.strip() == "nanmedian":
m = stats.nanmedian(map(float, sample_one))
cols.append(m)
elif test_id.strip() == "variation":
ra = stats.variation(map(float, sample_one))
cols.append(ra)
elif test_id.strip() == "boxcox_llf":
IIf = stats.boxcox_llf(imbda, map(float, sample_one))
cols.append(IIf)
elif test_id.strip() == "tiecorrect":
fa = stats.tiecorrect(map(float, sample_one))
cols.append(fa)
elif test_id.strip() == "rankdata":
r = stats.rankdata(map(float, sample_one), method=args.md)
cols.append(r)
elif test_id.strip() == "nanstd":
s = stats.nanstd(map(float, sample_one), bias=args.bias)
cols.append(s)
elif test_id.strip() == "anderson":
A2, critical, sig = stats.anderson(map(float, sample_one), dist=args.dist)
cols.append(A2)
for list in critical:
cols.append(list)
cols.append(",")
for list in sig:
cols.append(list)
elif test_id.strip() == "binom_test":
p_value = stats.binom_test(map(float, sample_one), n=args.n, p=args.p)
cols.append(p_value)
elif test_id.strip() == "gmean":
gm = stats.gmean(map(float, sample_one), dtype=args.dtype)
cols.append(gm)
elif test_id.strip() == "hmean":
hm = stats.hmean(map(float, sample_one), dtype=args.dtype)
cols.append(hm)
elif test_id.strip() == "kurtosis":
k = stats.kurtosis(map(float, sample_one), axis=args.axis, fisher=args.fisher, bias=args.bias)
cols.append(k)
elif test_id.strip() == "moment":
n_moment = stats.moment(map(float, sample_one), n=args.n)
cols.append(n_moment)
elif test_id.strip() == "normaltest":
k2, p_value = stats.normaltest(map(float, sample_one))
cols.append(k2)
cols.append(p_value)
elif test_id.strip() == "skew":
skewness = stats.skew(map(float, sample_one), bias=args.bias)
cols.append(skewness)
elif test_id.strip() == "skewtest":
z_value, p_value = stats.skewtest(map(float, sample_one))
cols.append(z_value)
cols.append(p_value)
elif test_id.strip() == "sem":
s = stats.sem(map(float, sample_one), ddof=args.ddof)
cols.append(s)
elif test_id.strip() == "zscore":
z = stats.zscore(map(float, sample_one), ddof=args.ddof)
for list in z:
cols.append(list)
elif test_id.strip() == "signaltonoise":
s2n = stats.signaltonoise(map(float, sample_one), ddof=args.ddof)
cols.append(s2n)
elif test_id.strip() == "percentileofscore":
p = stats.percentileofscore(map(float, sample_one), score=args.score, kind=args.kind)
cols.append(p)
elif test_id.strip() == "bayes_mvs":
c_mean, c_var, c_std = stats.bayes_mvs(map(float, sample_one), alpha=args.alpha)
cols.append(c_mean)
cols.append(c_var)
cols.append(c_std)
elif test_id.strip() == "sigmaclip":
c, c_low, c_up = stats.sigmaclip(map(float, sample_one), low=args.m, high=args.n)
cols.append(c)
cols.append(c_low)
cols.append(c_up)
elif test_id.strip() == "kstest":
d, p_value = stats.kstest(
map(float, sample_one), cdf=args.cdf, N=args.N, alternative=args.alternative, mode=args.mode
)
cols.append(d)
cols.append(p_value)
elif test_id.strip() == "chi2_contingency":
chi2, p, dof, ex = stats.chi2_contingency(
map(float, sample_one), correction=args.correction, lambda_=args.lambda_
)
cols.append(chi2)
cols.append(p)
cols.append(dof)
cols.append(ex)
elif test_id.strip() == "tmean":
if nf is 0 and mf is 0:
mean = stats.tmean(map(float, sample_one))
else:
mean = stats.tmean(map(float, sample_one), (mf, nf), (inclusive1, inclusive2))
cols.append(mean)
elif test_id.strip() == "tmin":
if mf is 0:
min = stats.tmin(map(float, sample_one))
else:
min = stats.tmin(map(float, sample_one), lowerlimit=mf, inclusive=args.inclusive)
cols.append(min)
elif test_id.strip() == "tmax":
if nf is 0:
max = stats.tmax(map(float, sample_one))
else:
max = stats.tmax(map(float, sample_one), upperlimit=nf, inclusive=args.inclusive)
cols.append(max)
elif test_id.strip() == "tvar":
if nf is 0 and mf is 0:
var = stats.tvar(map(float, sample_one))
else:
var = stats.tvar(map(float, sample_one), (mf, nf), (inclusive1, inclusive2))
cols.append(var)
elif test_id.strip() == "tstd":
if nf is 0 and mf is 0:
std = stats.tstd(map(float, sample_one))
else:
std = stats.tstd(map(float, sample_one), (mf, nf), (inclusive1, inclusive2))
cols.append(std)
elif test_id.strip() == "tsem":
if nf is 0 and mf is 0:
s = stats.tsem(map(float, sample_one))
else:
s = stats.tsem(map(float, sample_one), (mf, nf), (inclusive1, inclusive2))
cols.append(s)
elif test_id.strip() == "scoreatpercentile":
if nf is 0 and mf is 0:
s = stats.scoreatpercentile(
map(float, sample_one), map(float, sample_two), interpolation_method=args.interpolation
)
else:
s = stats.scoreatpercentile(
map(float, sample_one), map(float, sample_two), (mf, nf), interpolation_method=args.interpolation
)
for list in s:
cols.append(list)
elif test_id.strip() == "relfreq":
if nf is 0 and mf is 0:
rel, low_range, binsize, ex = stats.relfreq(map(float, sample_one), args.b)
else:
rel, low_range, binsize, ex = stats.relfreq(map(float, sample_one), args.b, (mf, nf))
for list in rel:
cols.append(list)
cols.append(low_range)
cols.append(binsize)
cols.append(ex)
elif test_id.strip() == "binned_statistic":
if nf is 0 and mf is 0:
st, b_edge, b_n = stats.binned_statistic(
map(float, sample_one), map(float, sample_two), statistic=args.statistic, bins=args.b
)
else:
st, b_edge, b_n = stats.binned_statistic(
map(float, sample_one),
map(float, sample_two),
statistic=args.statistic,
bins=args.b,
range=(mf, nf),
)
cols.append(st)
cols.append(b_edge)
cols.append(b_n)
elif test_id.strip() == "threshold":
if nf is 0 and mf is 0:
o = stats.threshold(map(float, sample_one), newval=args.new)
else:
o = stats.threshold(map(float, sample_one), mf, nf, newval=args.new)
for list in o:
cols.append(list)
elif test_id.strip() == "trimboth":
o = stats.trimboth(map(float, sample_one), proportiontocut=args.proportiontocut)
for list in o:
cols.append(list)
elif test_id.strip() == "trim1":
t1 = stats.trim1(map(float, sample_one), proportiontocut=args.proportiontocut, tail=args.tail)
for list in t1:
cols.append(list)
elif test_id.strip() == "histogram":
if nf is 0 and mf is 0:
hi, low_range, binsize, ex = stats.histogram(map(float, sample_one), args.b)
else:
hi, low_range, binsize, ex = stats.histogram(map(float, sample_one), args.b, (mf, nf))
cols.append(hi)
cols.append(low_range)
cols.append(binsize)
cols.append(ex)
elif test_id.strip() == "cumfreq":
if nf is 0 and mf is 0:
cum, low_range, binsize, ex = stats.cumfreq(map(float, sample_one), args.b)
else:
cum, low_range, binsize, ex = stats.cumfreq(map(float, sample_one), args.b, (mf, nf))
cols.append(cum)
cols.append(low_range)
cols.append(binsize)
cols.append(ex)
elif test_id.strip() == "boxcox_normmax":
if nf is 0 and mf is 0:
ma = stats.boxcox_normmax(map(float, sample_one))
else:
ma = stats.boxcox_normmax(map(float, sample_one), (mf, nf), method=args.method)
cols.append(ma)
elif test_id.strip() == "boxcox":
if imbda is 0:
box, ma, ci = stats.boxcox(map(float, sample_one), alpha=args.alpha)
cols.append(box)
cols.append(ma)
cols.append(ci)
else:
box = stats.boxcox(map(float, sample_one), imbda, alpha=args.alpha)
cols.append(box)
elif test_id.strip() == "histogram2":
h2 = stats.histogram2(map(float, sample_one), map(float, sample_two))
for list in h2:
cols.append(list)
elif test_id.strip() == "ranksums":
z_statistic, p_value = stats.ranksums(map(float, sample_one), map(float, sample_two))
cols.append(z_statistic)
cols.append(p_value)
elif test_id.strip() == "ttest_1samp":
t, prob = stats.ttest_1samp(map(float, sample_one), map(float, sample_two))
for list in t:
cols.append(list)
for list in prob:
cols.append(list)
elif test_id.strip() == "ansari":
AB, p_value = stats.ansari(map(float, sample_one), map(float, sample_two))
cols.append(AB)
cols.append(p_value)
elif test_id.strip() == "linregress":
slope, intercept, r_value, p_value, stderr = stats.linregress(
map(float, sample_one), map(float, sample_two)
)
cols.append(slope)
cols.append(intercept)
cols.append(r_value)
cols.append(p_value)
cols.append(stderr)
elif test_id.strip() == "pearsonr":
cor, p_value = stats.pearsonr(map(float, sample_one), map(float, sample_two))
cols.append(cor)
cols.append(p_value)
elif test_id.strip() == "pointbiserialr":
r, p_value = stats.pointbiserialr(map(float, sample_one), map(float, sample_two))
cols.append(r)
cols.append(p_value)
elif test_id.strip() == "ks_2samp":
d, p_value = stats.ks_2samp(map(float, sample_one), map(float, sample_two))
cols.append(d)
cols.append(p_value)
elif test_id.strip() == "mannwhitneyu":
mw_stats_u, p_value = stats.mannwhitneyu(
map(float, sample_one), map(float, sample_two), use_continuity=args.mwu_use_continuity
)
cols.append(mw_stats_u)
cols.append(p_value)
elif test_id.strip() == "zmap":
z = stats.zmap(map(float, sample_one), map(float, sample_two), ddof=args.ddof)
for list in z:
cols.append(list)
elif test_id.strip() == "ttest_ind":
mw_stats_u, p_value = stats.ttest_ind(
map(float, sample_one), map(float, sample_two), equal_var=args.equal_var
)
cols.append(mw_stats_u)
cols.append(p_value)
elif test_id.strip() == "ttest_rel":
t, prob = stats.ttest_rel(map(float, sample_one), map(float, sample_two), axis=args.axis)
cols.append(t)
cols.append(prob)
elif test_id.strip() == "mood":
z, p_value = stats.mood(map(float, sample_one), map(float, sample_two), axis=args.axis)
cols.append(z)
cols.append(p_value)
elif test_id.strip() == "shapiro":
W, p_value, a = stats.shapiro(map(float, sample_one), map(float, sample_two), args.reta)
cols.append(W)
cols.append(p_value)
for list in a:
cols.append(list)
elif test_id.strip() == "kendalltau":
k, p_value = stats.kendalltau(
map(float, sample_one), map(float, sample_two), initial_lexsort=args.initial_lexsort
)
cols.append(k)
cols.append(p_value)
elif test_id.strip() == "entropy":
s = stats.entropy(map(float, sample_one), map(float, sample_two), base=args.base)
cols.append(s)
elif test_id.strip() == "spearmanr":
if sample2 == 1:
rho, p_value = stats.spearmanr(map(float, sample_one), map(float, sample_two))
else:
rho, p_value = stats.spearmanr(map(float, sample_one))
cols.append(rho)
cols.append(p_value)
elif test_id.strip() == "wilcoxon":
if sample2 == 1:
T, p_value = stats.wilcoxon(
map(float, sample_one),
map(float, sample_two),
zero_method=args.zero_method,
correction=args.correction,
)
else:
T, p_value = stats.wilcoxon(
map(float, sample_one), zero_method=args.zero_method, correction=args.correction
)
cols.append(T)
cols.append(p_value)
elif test_id.strip() == "chisquare":
if sample2 == 1:
rho, p_value = stats.chisquare(map(float, sample_one), map(float, sample_two), ddof=args.ddof)
else:
rho, p_value = stats.chisquare(map(float, sample_one), ddof=args.ddof)
cols.append(rho)
cols.append(p_value)
elif test_id.strip() == "power_divergence":
if sample2 == 1:
stat, p_value = stats.power_divergence(
map(float, sample_one), map(float, sample_two), ddof=args.ddof, lambda_=args.lambda_
)
else:
stat, p_value = stats.power_divergence(map(float, sample_one), ddof=args.ddof, lambda_=args.lambda_)
cols.append(stat)
cols.append(p_value)
elif test_id.strip() == "theilslopes":
if sample2 == 1:
mpe, met, lo, up = stats.theilslopes(map(float, sample_one), map(float, sample_two), alpha=args.alpha)
else:
mpe, met, lo, up = stats.theilslopes(map(float, sample_one), alpha=args.alpha)
cols.append(mpe)
cols.append(met)
cols.append(lo)
cols.append(up)
elif test_id.strip() == "combine_pvalues":
if sample2 == 1:
stat, p_value = stats.combine_pvalues(
map(float, sample_one), method=args.med, weights=map(float, sample_two)
)
else:
stat, p_value = stats.combine_pvalues(map(float, sample_one), method=args.med)
cols.append(stat)
cols.append(p_value)
elif test_id.strip() == "obrientransform":
ob = stats.obrientransform(*b_samples)
for list in ob:
elements = ",".join(map(str, list))
cols.append(elements)
elif test_id.strip() == "f_oneway":
f_value, p_value = stats.f_oneway(*b_samples)
cols.append(f_value)
cols.append(p_value)
elif test_id.strip() == "kruskal":
h, p_value = stats.kruskal(*b_samples)
cols.append(h)
cols.append(p_value)
elif test_id.strip() == "friedmanchisquare":
fr, p_value = stats.friedmanchisquare(*b_samples)
cols.append(fr)
cols.append(p_value)
elif test_id.strip() == "fligner":
xsq, p_value = stats.fligner(center=args.center, proportiontocut=args.proportiontocut, *b_samples)
cols.append(xsq)
cols.append(p_value)
elif test_id.strip() == "bartlett":
T, p_value = stats.bartlett(*b_samples)
cols.append(T)
cols.append(p_value)
elif test_id.strip() == "levene":
w, p_value = stats.levene(center=args.center, proportiontocut=args.proportiontocut, *b_samples)
cols.append(w)
cols.append(p_value)
elif test_id.strip() == "median_test":
stat, p_value, m, table = stats.median_test(
ties=args.ties, correction=args.correction, lambda_=args.lambda_, *b_samples
)
cols.append(stat)
cols.append(p_value)
cols.append(m)
cols.append(table)
for list in table:
elements = ",".join(map(str, list))
cols.append(elements)
outfile.write("%s\n" % "\t".join(map(str, cols)))
outfile.close()
def run_simulation(self):
self.parameter_values()
increment_exponents_ratio = 0.005
first_exponent_list = np.arange(0.01, 0.5, increment_exponents_ratio)
increment_volatility = 0.0025
volatility_list = np.arange(0.01, 0.25, increment_volatility)
with open('stochastic_variance.csv', 'wb') as stochastic_variance:
for volatility in volatility_list:
print 'volatility', volatility
self.parameters.goods_demand_volatility = volatility
self.assign_run_parameters()
self.run.initialize()
self.run.create_economy()
self.run.run_forward_in_time()
self.run.compute_run_statistics()
last_ten_percent_time_steps = int(self.parameters.time_steps * 0.1)
list_stock_ratio = self.run.capital_stock_ratio[-last_ten_percent_time_steps:]
list_stock_ratio = np.array(list_stock_ratio)
list_stock_ratio = list_stock_ratio[~np.isnan(list_stock_ratio)]
stock_variance = stats.variation(list_stock_ratio)
list_price_ratio = self.run.capital_price_ratio[-last_ten_percent_time_steps:]
list_price_ratio = np.array(list_price_ratio)
list_price_ratio = list_price_ratio[~np.isnan(list_price_ratio)]
price_variance = stats.variation(list_price_ratio)
writer = csv.writer(stochastic_variance, delimiter=',')
writer.writerow([volatility] + [stock_variance] + [price_variance])
with open('stock_price.csv', 'wb') as data_stock_price:
for first_exponent in first_exponent_list:
print 'first_exponent', first_exponent
self.parameters.goods_demand_volatility = 0
self.parameters.goods_firm_exponents = [first_exponent, 0.5]
self.assign_run_parameters()
self.run.initialize()
self.run.create_economy()
self.run.run_forward_in_time()
self.run.compute_run_statistics()
last_ten_percent_time_steps = int(self.parameters.time_steps * 0.1)
list_stock_ratio = self.run.capital_stock_ratio[-last_ten_percent_time_steps:]
list_stock_ratio = np.array(list_stock_ratio)
list_stock_ratio = list_stock_ratio[~np.isnan(list_stock_ratio)]
stock_ratio = np.mean(list_stock_ratio[-last_ten_percent_time_steps:])
list_price_ratio = self.run.capital_price_ratio[-last_ten_percent_time_steps:]
list_price_ratio = np.array(list_price_ratio)
list_price_ratio = list_price_ratio[~np.isnan(list_price_ratio)]
price_ratio = np.mean(list_price_ratio[-last_ten_percent_time_steps:])
ratio_exponents = first_exponent / 0.5
writer = csv.writer(data_stock_price, delimiter=',')
writer.writerow([ratio_exponents] + [stock_ratio] + [price_ratio])
with open('stochastic_stock_price.csv', 'wb') as stochastic_stock_price:
for first_exponent in first_exponent_list:
self.parameters.goods_demand_volatility = 0.1
print 'stochastic first_exponent', first_exponent
self.parameters.goods_firm_exponents = [first_exponent, 0.5]
self.assign_run_parameters()
self.run.initialize()
self.run.create_economy()
self.run.run_forward_in_time()
self.run.compute_run_statistics()
last_ten_percent_time_steps = int(self.parameters.time_steps * 0.1)
list_stock_ratio = self.run.capital_stock_ratio[-last_ten_percent_time_steps:]
list_stock_ratio = np.array(list_stock_ratio)
list_stock_ratio = list_stock_ratio[~np.isnan(list_stock_ratio)]
stock_ratio = np.mean(list_stock_ratio[-last_ten_percent_time_steps:])
list_price_ratio = self.run.capital_price_ratio[-last_ten_percent_time_steps:]
list_price_ratio = np.array(list_price_ratio)
list_price_ratio = list_price_ratio[~np.isnan(list_price_ratio)]
price_ratio = np.mean(list_price_ratio[-last_ten_percent_time_steps:])
ratio_exponents = first_exponent / 0.5
writer = csv.writer(stochastic_stock_price, delimiter=',')
writer.writerow([ratio_exponents] + [stock_ratio] + [price_ratio])
def descstats(data, cols=None, axis=0):
'''
Prints descriptive statistics for one or multiple variables.
Parameters
------------
data: numpy array
`x` is the data
v: list, optional
A list of the column number or field names (for a recarray) of variables.
Default is all columns.
axis: 1 or 0
axis order of data. Default is 0 for column-ordered data.
Example
----------simple
>>>
decstats(data.exog,v=['x_1','x_2','x_3'])
'''
x = np.array(data) # or rather, the data we're interested in
if cols is None:
# if isinstance(x, np.recarray):
# cols = np.array(len(x.dtype.names))
if not isinstance(x, np.recarray) and x.ndim == 1:
x = x[:,None]
if x.shape[1] == 1:
desc = '''
---------------------------------------------
Univariate Descriptive Statistics
---------------------------------------------
Var. Name %(name)12s
----------
Obs. %(nobs)22i Range %(range)22s
Sum of Wts. %(sum)22s Coeff. of Variation %(coeffvar)22.4g
Mode %(mode)22.4g Skewness %(skewness)22.4g
Repeats %(nmode)22i Kurtosis %(kurtosis)22.4g
Mean %(mean)22.4g Uncorrected SS %(uss)22.4g
Median %(median)22.4g Corrected SS %(ss)22.4g
Variance %(variance)22.4g Sum Observations %(sobs)22.4g
Std. Dev. %(stddev)22.4g
''' % {'name': cols, 'sum': 'N/A', 'nobs': len(x), 'mode': \
stats.mode(x)[0][0], 'nmode': stats.mode(x)[1][0], \
'mean': x.mean(), 'median': np.median(x), 'range': \
'('+str(x.min())+', '+str(x.max())+')', 'variance': \
x.var(), 'stddev': x.std(), 'coeffvar': \
stats.variation(x), 'skewness': stats.skew(x), \
'kurtosis': stats.kurtosis(x), 'uss': stats.ss(x),\
'ss': stats.ss(x-x.mean()), 'sobs': np.sum(x)}
# ''' % {'name': cols[0], 'sum': 'N/A', 'nobs': len(x[cols[0]]), 'mode': \
# stats.mode(x[cols[0]])[0][0], 'nmode': stats.mode(x[cols[0]])[1][0], \
# 'mean': x[cols[0]].mean(), 'median': np.median(x[cols[0]]), 'range': \
# '('+str(x[cols[0]].min())+', '+str(x[cols[0]].max())+')', 'variance': \
# x[cols[0]].var(), 'stddev': x[cols[0]].std(), 'coeffvar': \
# stats.variation(x[cols[0]]), 'skewness': stats.skew(x[cols[0]]), \
# 'kurtosis': stats.kurtosis(x[cols[0]]), 'uss': stats.ss(x[cols[0]]),\
# 'ss': stats.ss(x[cols[0]]-x[cols[0]].mean()), 'sobs': np.sum(x[cols[0]])}
desc+= '''
Percentiles
-------------
1 %% %12.4g
5 %% %12.4g
10 %% %12.4g
25 %% %12.4g
50 %% %12.4g
75 %% %12.4g
90 %% %12.4g
95 %% %12.4g
99 %% %12.4g
''' % tuple([stats.scoreatpercentile(x,per) for per in (1,5,10,25,
50,75,90,95,99)])
t,p_t=stats.ttest_1samp(x,0)
M,p_M=sign_test(x)
S,p_S=stats.wilcoxon(np.squeeze(x))
desc+= '''
Tests of Location (H0: Mu0=0)
-----------------------------
Test Statistic Two-tailed probability
-----------------+-----------------------------------------
Student's t | t %7.5f Pr > |t| <%.4f
Sign | M %8.2f Pr >= |M| <%.4f
Signed Rank | S %8.2f Pr >= |S| <%.4f
''' % (t,p_t,M,p_M,S,p_S)
# Should this be part of a 'descstats'
# in any event these should be split up, so that they can be called
# individually and only returned together if someone calls summary
# or something of the sort
elif x.shape[1] > 1:
desc ='''
Var. Name | Obs. Mean Std. Dev. Range
------------+--------------------------------------------------------'''+\
os.linesep
# for recarrays with columns passed as names
# if isinstance(cols[0],str):
# for var in cols:
# desc += "%(name)15s %(obs)9i %(mean)12.4g %(stddev)12.4g \
#%(range)20s" % {'name': var, 'obs': len(x[var]), 'mean': x[var].mean(),
# 'stddev': x[var].std(), 'range': '('+str(x[var].min())+', '\
# +str(x[var].max())+')'+os.linesep}
# else:
for var in range(x.shape[1]):
desc += "%(name)15s %(obs)9i %(mean)12.4g %(stddev)12.4g \
%(range)20s" % {'name': var, 'obs': len(x[:,var]), 'mean': x[:,var].mean(),
'stddev': x[:,var].std(), 'range': '('+str(x[:,var].min())+', '+\
str(x[:,var].max())+')'+os.linesep}
else:
raise ValueError, "data not understood"
return desc
def BasicSummary1(series): series_len = len(series) basiclist=[stats.skew(series), stats.skewtest(series)[1], stats.kurtosis(series),stats.kurtosistest(series)[1],stats.variation(series)] return np.round(pd.Series(basiclist),decimals=6)
parts = doHeading(1,Chapters[0], h1, parts)
para = Paragraph(u"My Text that I can write here or take it from somewhere like shown in the next paragraph.", style["Normal"])
parts.append(para)
parts = doHeading(1,Subchapters[1], h2,parts)
title = u"my first data"
para = Paragraph(Context[title], style["Normal"])
parts.append(para)
text = {}
text.update({"Standardabweichung":np.std(x)})
text.update({"Varianz":variation(x)})
text.update({"Schiefe":skew(x)})
text.update({"Kurtosis":kurtosis(x)})
print( Content[title] )
thisImage = plotHist(Content[title],title,subname="",spec="",show=False,text=text,Versuch=Chapters[0],path="",N=6)
factor = doc.width/thisImage.drawWidth
thisImage.drawHeight = thisImage.drawHeight * factor
thisImage.drawWidth = thisImage.drawWidth * factor
parts.append(thisImage)
para = Paragraph(u"Fig. " + str(doc.figCount) + title, caption)
parts.append(para)
def sharpe(x):
v = stats.variation(x)
if np.isinf(v):
return 0
else:
return v
def Convert2PdfReport(doc,parts,Daten,outpath,Fahrzeuge,Note=None,Carnames=None): #,outname,
"""
Plots Data and Graphics to a Portable Document File
"""
numbers = [int(re.findall(r'\d+', item)[0]) for item in Fahrzeuge]
idxs = [numbers.index(x) for x in sorted(numbers)]
Fahrzeuge = [Fahrzeuge[this] for this in idxs]
print( "Fahrzeuge/Vergleiche:",Fahrzeuge )
#print "Phaenomene:",Phaenomene
if not Note == None:
vMin=np.min(Note.Note)
vMax=np.max(Note.Note)
if Note.typ == "abs":
lowmid=3.5
midhigh=6.5
leftc="g"
rightc="m"
leftct=colors.limegreen
rightct=colors.pink
elif Note.typ == "rel":
lowmid=-1.5
midhigh=1.5
leftc="m"
rightc="g"
leftct=colors.pink
rightct=colors.limegreen
for i,Fahrzeug in enumerate(Fahrzeuge):
print( Daten.viewkeys() )
Vergleich = Daten[Fahrzeug] #,Meinungen
title = u"Auswertung für " + str(Fahrzeug)
if not Carnames == None:
htitle = title + " " + str(Carnames[Fahrzeug])
Means = []#()
Stds = []#()
Data = []
celldata = [["" for k in range(7+2)] for m in range(7+1)]
#celldata[0:-1][0] = [u"Heben",u"Nicken",u"Wanken",u"Werfen",u"(Mikro-) Stuckern",u"Stößigkeit"] #Phe
#celldata[0][0:-1] = ["","Mittelwert","Standardabweichung","Minimum","Maximum","Stichprobenmenge"]
parts = doHeading(Fahrzeuge[i],htitle, h1, parts)
parts = doHeading(Fahrzeuge[i],u"Fahrzeug Übersicht", h2,parts)
Phaenomene = []
for j,key in enumerate(Vergleich.iterkeys()):
Phaenomene.append(key)
Phaenomen = Vergleich[key]
#Means = Means.__add__( (Phaenomen.mean,) )
# Stds = Stds.__add__( (Phaenomen.std,) )
Means.append(Phaenomen.mean)
Stds.append(Phaenomen.std/2.)
Data.append(Phaenomen)
try:
#print Phe[j]
#print celldata
try:
celldata[j+1][0] = unicode(Phaenomene[j])
except IndexError:
print( "Error:" )
#print celldata, Phaenomene[j]
if not Phaenomen.len == 0:
try:
celldata[0][1] = "Mittelwert"
celldata[j+1][1] = '%1.3f' % (Phaenomen.mean)
celldata[0][2] = "Standardabweichung"
celldata[j+1][2] = '%1.3f' % (Phaenomen.std)
celldata[0][3] = "Minimum"
celldata[j+1][3] = Phaenomen.min
celldata[0][4] = "Maximum"
celldata[j+1][4] = Phaenomen.max
celldata[0][5] = "Stichprobenmenge"
celldata[j+1][5] = Phaenomen.len
except:
pass
else:
para = Paragraph(u"Zu "+unicode(Phaenomene[j])+u": Keine Auswertung Möglich,", style["Normal"])
parts.append(para)
para = Paragraph("Anzahl Vergebener Noten:" + str(Phaenomen.len), style["Normal"])
parts.append(para)
except LayoutError:
print( "Layout error detected, could not create the Document Template" )
#thisDrawing = barChart(Means,title+"Mittelwerte",Phaenomene,path=outpath,vMin=-4,vMax=4)
thisDrawing = barHorizontal(Means[::-1],title+"Mittelwerte",Phaenomene[::-1],Stds[::-1],path=outpath,vMin=vMin,vMax=vMax,lowmid=lowmid,midhigh=midhigh,leftc=leftc,rightc=rightc) # relative:
factor = (doc.width*0.85)/thisDrawing.drawWidth
thisDrawing.drawHeight = thisDrawing.drawHeight * factor
thisDrawing.drawWidth = thisDrawing.drawWidth * factor
parts.append(thisDrawing)
para = Paragraph(u"Mittelwerte der Phänomene mit Standardabweichung", caption)
parts.append(para)
parts.append(Spacer(1, 12))
mystyle=[
('LINEABOVE',(0,0),(-1,0),1,colors.blue),
('LINEABOVE',(0,1),(-1,1),1,colors.blue),
('LINEBEFORE',(1,1),(1,-1),1,colors.pink),
('LINEBELOW',(0,-1),(-1,-1),1,colors.blue),]
for l,key in enumerate(Vergleich.iterkeys()):
value = Vergleich[key].mean
if ( value >= vMin and value < lowmid ):
mystyle.append(('BACKGROUND',(1,l+1),(1,l+1),leftct))
elif ( value >= lowmid and value < midhigh ):
mystyle.append(('BACKGROUND',(1,l+1),(1,l+1),colors.khaki))
elif ( value >= midhigh and value <= vMax ):
mystyle.append(('BACKGROUND',(1,l+1),(1,l+1), rightct))
else:
pass
t=Table(celldata, style=mystyle)
#colors.brown
parts.append(t)
parts.append(Spacer(1, 12))
parts.append(PageBreak())
parts = doHeading(Fahrzeuge[i],u"Histogramme der Phänomene", h2,parts)
for m,data in enumerate(Data):
if not data.len == 0:
text = {}
text.update({"Standardabweichung":data.std})
text.update({"Varianz":variation(data.Event)})
text.update({"Schiefe":skew(data.Event)})
text.update({"Kurtosis":kurtosis(data.Event)})
thisImage = plotHist(data.Event,Phaenomene[m],show=False,text=text,Versuch=title,path=outpath,N=Note.Note,Min=vMin,Max=vMax)
#except:
# continue
factor = (doc.width*0.85)/thisImage.drawWidth
thisImage.drawHeight = thisImage.drawHeight * factor
thisImage.drawWidth = thisImage.drawWidth * factor
parts = doHeading(Fahrzeuge[i],u"Phänomen " + unicode(Phaenomene[m]), h3,parts)
#para = Paragraph(u"Phänomen " + str(Phe[idxs[m]]), style["Heading3"])
#parts.append(para)
parts.append(thisImage)
parts.append(PageBreak())
parts = doHeading(Fahrzeuge[i],u"Verbale Bemerkungen", h2,parts)
for o,Phaenomen in enumerate(Phaenomene):
if not len(Vergleich[Phaenomen].Text) == 0:
parts = doHeading(Fahrzeuge[i],u"Probandenmeinung " + unicode(Phaenomen) , h3,parts)
#print Phaenomene[o], Meinungen[o]
para = Paragraph(Vergleich[Phaenomen].Text, style["Normal"])
parts.append(para)
parts.append(PageBreak())
plt.close('all')
try:
return parts
#doc.build(parts)
#doc.multiBuild(parts)
except LayoutError:
return LayoutError("there is an error with the Layout")
def generateFeatures(all_radar_features):
features = [];
####################Take aggregate statistics based on the radar quality index
features.append(len(all_radar_features)) # No of Radars;
for i in range(0, len(all_radar_features[0])):
if i in [0, 1, 2, 3, 4, 12]:
# Time based observations
observations = [r[i] for r in all_radar_features];
features.append(round(np.mean(observations), 2));
features.append(round(np.std(observations), 2));
elif i == 7:
#HydrometeorType
#For each of the HydrometeorType, compute the weighted mean of the counts
HydrometeorType = dict();
for r in all_radar_features:
for k in r[i].keys():
if float(k) in HydrometeorType:
HydrometeorType[float(k)] += (r[12] * r[i][k])
else:
HydrometeorType[float(k)] = (r[12] * r[i][k])
for hm in range(0, 15):
if float(hm) in HydrometeorType.keys():
features.append(HydrometeorType[hm]);
else:
features.append(0);
#Add the most frequent HydrometeorType
HydrometeorType = dict();
for r in all_radar_features:
for k in r[i].keys():
if float(k) in HydrometeorType:
HydrometeorType[float(k)] += (r[i][k])
else:
HydrometeorType[float(k)] = (r[i][k])
most_frequent_meteor = sorted(HydrometeorType.items(), key=operator.itemgetter(1))
if most_frequent_meteor:
features.append(most_frequent_meteor[0][0]);
else:
features.append("NaN");
else:
#Only compute the stats of radar values which aren't missing
observations = [r[12] * float(r[i]) for r in all_radar_features if r[i] != "NaN"];
if len(observations) > 0:
features.append(round(np.mean(observations), 2));
features.append(round(np.std(observations), 2));
features.append(round(np.median(observations), 2));
if np.mean(observations) > 0:
features.append(round(variation(observations), 2)); #Coefficient of variations
else:
features.append("NaN"); #Coefficient of variations
else:
features.append("NaN");
features.append("NaN");
features.append("NaN");
features.append("NaN");
return features;
