#cd3 = 1.0 # Arecibo is limited to 0.64 because one of the receivers went bad at hi-res mode once
#naxis3 = int(np.ceil((velocityrange[1]-velocityrange[0])/cd3))+4 # +4 is BAD! don't do that.
naxis3 = int((velocityrange[1]-velocityrange[0]) / cd3) + 1 # +1 is good: include -50
crval3 = 50.0
# dumb debug stuff
vels = crval3+cd3*(np.arange(naxis3)+1-naxis3/2-1)
# this will probably cause an error but I must insist..
#if velocityrange[0]<=vels.min() or velocityrange[1]>=vels.max():
# raise ValueError("Add more points. Something's going to be out of range for stupid star stupid link")
makecube.generate_header(49.209553, -0.277137, naxis1=192, naxis2=128,
pixsize=24, naxis3=naxis3, cd3=cd3, crval3=crval3,
clobber=True, restfreq=14.488479e9)
makecube.make_blank_images(cubename_lores,clobber=True)
for fn in [filename]:
print "Adding file %s" % fn
fullfn = fn
makecube.add_file_to_cube(fullfn,
cubename_lores+".fits",
add_with_kernel=True,
kernel_fwhm=50./3600.,
nhits=cubename_lores+"_nhits.fits",
diagnostic_plot_name=fullfn.replace('.fits','_data_scrubbed.png'),
velocityrange=velocityrange,excludefitrange=[40,75],noisecut=1.0)
# more aggressive noisecut
makecube.runscript(cubename_lores)
makecube.make_flats(cubename_lores,vrange=[45,75],noisevrange=[-15,30])
makecube.make_taucube(cubename_lores,cubename_lores+"_continuum.fits",etamb=0.886)
from astropy import units as u
from sdpy import makecube
from paths import dpath
flat_vrange = [45,75]
cubename_lores_supersampled = dpath('W51_H2CO22_pyproc_cube_lores_supersampled')
linefreq = 14.488479e9
makecube.make_taucube(cubename_lores_supersampled,
cubename_lores_supersampled+"_continuum.fits",
etamb=0.886, linefreq=linefreq*u.Hz, tex=0)
makecube.make_flats(cubename_lores_supersampled.replace("cube","taucube"),
vrange=flat_vrange,noisevrange=[-50,-1],suffix='.fits')
makecube.make_flats(cubename_lores_supersampled, vrange=[45,75],
noisevrange=[-15,30])
linefreq = 4.8296594e9
cubename_supersampled = dpath('W51_H2CO11_cube_supersampled')
makecube.make_taucube(cubename_supersampled,
continuum=cubename_supersampled+"_continuum.fits",
linefreq=linefreq, tex=0) # etamb accounted for already , etamb=0.51)
makecube.make_flats(cubename_supersampled.replace("cube","taucube"),
vrange=flat_vrange,noisevrange=[-50,-1],suffix='.fits')
"W51_h213coW_spectra_0910.fits",
"W51_h213coW_spectra_0911.fits",
"W51_h213coW_spectra_0912.fits",
"W51_h213coW_spectra_0915.fits",
]
for fn in files:
fullfn = fix_TDIM_in_header(prefix + fn)
makecube.add_file_to_cube(
fullfn,
cubename_supersampled + ".fits",
add_with_kernel=True,
kernel_fwhm=20.0 / 3600.0,
nhits=cubename_supersampled + "_nhits.fits",
diagnostic_plot_name=fullfn.replace(".fits", "_data_scrubbed.png"),
velocityrange=velocityrange,
excludefitrange=[vmin, vmax],
linefreq=linefreq,
)
flat_vrange = [45, 75]
makecube.runscript(cubename_supersampled)
makecube.make_flats(cubename_supersampled, vrange=flat_vrange, noisevrange=[-50, -1])
makecube.make_taucube(
cubename_supersampled, continuum=cubename_supersampled + "_continuum.fits", linefreq=linefreq
) # etamb accounted for already , etamb=0.51)
makecube.make_flats(
cubename_supersampled.replace("cube", "taucube"), vrange=flat_vrange, noisevrange=[-50, -1], suffix=".fits"
)
kernel_fwhm=90./3600.,
velocityrange=[-400,400],excludefitrange=[-225,250],
smoothto=2)
c1 = fits.getdata(cn_fmt.format('A9',sr[0],sr[1])+".fits")
c2 = fits.getdata(cn_fmt.format('A13',sr[0],sr[1])+".fits")
hdr = fits.getheader(cn+".fits")
poldiff = c1-c2
hdu = fits.PrimaryHDU(data=poldiff,header=hdr)
hdu.writeto(cn_fmt.format("poldiff",sr[0],sr[1])+".fits",clobber=True)
os.system(outpath+'LimaBean_H2CO11_cube_starlink.sh')
makecube.make_flats(cubename,vrange=[-20,60],noisevrange=[250,300])
makecube.make_taucube(cubename,cubename+"_continuum.fits",etamb=0.98)
cubename=outpath+'LimaBean_H2CO11_cube_scan2'
files = [outpath+'12B_221_22to32_A13_F1.fits',
outpath+'12B_221_22to32_A9_F1.fits',
]
makecube.generate_header(0.256, 0.0220, naxis1=100, naxis2=100, pixsize=15,
naxis3=800, cd3=1.0, clobber=True, restfreq=4.8296594e9)
makecube.make_blank_images(cubename,clobber=True)
for fn in files:
makecube.add_file_to_cube(fn,
cubename+'.fits',
nhits=cubename+'_nhits.fits',
wcstype='V',
add_with_kernel=True,
for fn in filelist+filelist2:
log.info("Adding file %s" % fn)
fullfn = '/Users/adam/observations/gbt/W51map/'+fn
d = pyfits.getdata(fullfn)
pl.clf()
pl.imshow(d['DATA'],norm=asinh_norm.AsinhNorm())
pl.savefig(fullfn.replace(".fits","_data.png"))
pl.clf()
dsub = d['DATA']-np.median(d['DATA'],axis=1)[:,None]
pl.imshow(dsub)
pl.savefig(fullfn.replace(".fits","_data_subbed.png"))
makecube.add_file_to_cube(fullfn,
cubename_lores_supersampled+".fits",
add_with_kernel=True,
kernel_fwhm=20./3600.,
nhits=cubename_lores_supersampled+"_nhits.fits",
diagnostic_plot_name=fullfn.replace('.fits','_data_scrubbed.png'),
velocityrange=velocityrange,excludefitrange=[40,75],noisecut=np.inf,
continuum_prefix=cubename_lores_supersampled+fn.replace(".fits",''),
progressbar=True,
chmod=True,
linefreq=linefreq,
negative_mean_cut=-1)
makecube.runscript(cubename_lores_supersampled)
makecube.make_flats(cubename_lores_supersampled, vrange=[45,75],
noisevrange=[-15,30])
makecube.make_taucube(cubename_lores_supersampled,
cubename_lores_supersampled+"_continuum.fits",
etamb=0.886, linefreq=linefreq*u.Hz, tex=0)
# kernel = ((2.5*60)**2 - 50.**2)**0.5 / sqrt(8*log(2)) = 60 arcsec
# 60 arcsec / 15 "/pixel = 4
cubesm2 = FITS_tools.cube_regrid.gsmooth_cube(cube[0].data, [5,4,4], use_fft=True, psf_pad=False, fft_pad=False)
cubesm = smooth_cube(cube[0].data, kernelwidth=4, interpolate_nan=True)
cube[0].data = cubesm
cube.writeto(cubename+"_sub_smoothtoCband.fits",clobber=True)
cube[0].data = cubesm2
cube.writeto(cubename+"_sub_smoothtoCband_vsmooth.fits",clobber=True)
#makecube.make_taucube(cubename,cubename+"_continuum.fits",etamb=0.886)
#makecube.make_taucube(cubename,cubename+"_continuum.fits",etamb=0.886, suffix="_sub_smoothtoCband.fits")
# -0.4 is the most negative point in the continuum map...
makecube.make_taucube(cubename,
cubename+"_continuum.fits",
etamb=0.886,
tex=2.0,
suffix="_sub_smoothtoCband_vsmooth.fits",
outsuffix="_smoothtoCband_vsmooth.fits",
TCMB=2.7315+0.4)
makecube.make_taucube(cubename,
cubename+"_continuum.fits",
etamb=0.886,
tex=2.0,
suffix="_sub_smoothtoCband.fits",
outsuffix="_smoothtoCband.fits",
TCMB=2.7315+0.4)
makecube.make_taucube(cubename,
cubename+"_continuum.fits",
etamb=0.886,
naxis1=192,
naxis2=128,
pixsize=24,
naxis3=naxis3,
cd3=cd3,
crval3=crval3,
clobber=True,
restfreq=14.488479e9)
makecube.make_blank_images(cubename_lores, clobber=True)
for fn in [filename]:
print "Adding file %s" % fn
fullfn = fn
makecube.add_file_to_cube(fullfn,
cubename_lores + ".fits",
add_with_kernel=True,
kernel_fwhm=50. / 3600.,
nhits=cubename_lores + "_nhits.fits",
diagnostic_plot_name=fullfn.replace(
'.fits', '_data_scrubbed.png'),
velocityrange=velocityrange,
excludefitrange=[40, 75],
noisecut=1.0)
# more aggressive noisecut
makecube.runscript(cubename_lores)
makecube.make_flats(cubename_lores, vrange=[45, 75], noisevrange=[-15, 30])
makecube.make_taucube(cubename_lores,
cubename_lores + "_continuum.fits",
etamb=0.886)
