def thermald_thread() -> NoReturn:
pm = messaging.PubMaster(['deviceState'])
pandaState_timeout = int(1000 * 2.5 * DT_TRML) # 2.5x the expected pandaState frequency
pandaState_sock = messaging.sub_sock('pandaStates', timeout=pandaState_timeout)
sm = messaging.SubMaster(["peripheralState", "gpsLocationExternal", "managerState"])
fan_speed = 0
count = 0
onroad_conditions: Dict[str, bool] = {
"ignition": False,
}
startup_conditions: Dict[str, bool] = {}
startup_conditions_prev: Dict[str, bool] = {}
off_ts = None
started_ts = None
started_seen = False
thermal_status = ThermalStatus.green
usb_power = True
network_type = NetworkType.none
network_strength = NetworkStrength.unknown
network_info = None
modem_version = None
registered_count = 0
nvme_temps = None
modem_temps = None
current_filter = FirstOrderFilter(0., CURRENT_TAU, DT_TRML)
temp_filter = FirstOrderFilter(0., TEMP_TAU, DT_TRML)
pandaState_prev = None
should_start_prev = False
in_car = False
handle_fan = None
is_uno = False
ui_running_prev = False
params = Params()
power_monitor = PowerMonitoring()
no_panda_cnt = 0
HARDWARE.initialize_hardware()
thermal_config = HARDWARE.get_thermal_config()
# TODO: use PI controller for UNO
controller = PIController(k_p=0, k_i=2e-3, neg_limit=-80, pos_limit=0, rate=(1 / DT_TRML))
# Leave flag for loggerd to indicate device was left onroad
if params.get_bool("IsOnroad"):
params.put_bool("BootedOnroad", True)
while True:
pandaStates = messaging.recv_sock(pandaState_sock, wait=True)
sm.update(0)
peripheralState = sm['peripheralState']
msg = read_thermal(thermal_config)
if pandaStates is not None and len(pandaStates.pandaStates) > 0:
pandaState = pandaStates.pandaStates[0]
# If we lose connection to the panda, wait 5 seconds before going offroad
if pandaState.pandaType == log.PandaState.PandaType.unknown:
no_panda_cnt += 1
if no_panda_cnt > DISCONNECT_TIMEOUT / DT_TRML:
if onroad_conditions["ignition"]:
cloudlog.error("Lost panda connection while onroad")
onroad_conditions["ignition"] = False
else:
no_panda_cnt = 0
onroad_conditions["ignition"] = pandaState.ignitionLine or pandaState.ignitionCan
in_car = pandaState.harnessStatus != log.PandaState.HarnessStatus.notConnected
usb_power = peripheralState.usbPowerMode != log.PeripheralState.UsbPowerMode.client
# Setup fan handler on first connect to panda
if handle_fan is None and peripheralState.pandaType != log.PandaState.PandaType.unknown:
is_uno = peripheralState.pandaType == log.PandaState.PandaType.uno
if TICI:
cloudlog.info("Setting up TICI fan handler")
handle_fan = handle_fan_tici
elif is_uno or PC:
cloudlog.info("Setting up UNO fan handler")
handle_fan = handle_fan_uno
else:
cloudlog.info("Setting up EON fan handler")
setup_eon_fan()
handle_fan = handle_fan_eon
# Handle disconnect
if pandaState_prev is not None:
if pandaState.pandaType == log.PandaState.PandaType.unknown and \
pandaState_prev.pandaType != log.PandaState.PandaType.unknown:
params.clear_all(ParamKeyType.CLEAR_ON_PANDA_DISCONNECT)
pandaState_prev = pandaState
# these are expensive calls. update every 10s
if (count % int(10. / DT_TRML)) == 0:
try:
network_type = HARDWARE.get_network_type()
network_strength = HARDWARE.get_network_strength(network_type)
network_info = HARDWARE.get_network_info() # pylint: disable=assignment-from-none
nvme_temps = HARDWARE.get_nvme_temperatures()
modem_temps = HARDWARE.get_modem_temperatures()
# Log modem version once
if modem_version is None:
modem_version = HARDWARE.get_modem_version() # pylint: disable=assignment-from-none
if modem_version is not None:
cloudlog.warning(f"Modem version: {modem_version}")
if TICI and (network_info.get('state', None) == "REGISTERED"):
registered_count += 1
else:
registered_count = 0
if registered_count > 10:
cloudlog.warning(f"Modem stuck in registered state {network_info}. nmcli conn up lte")
os.system("nmcli conn up lte")
registered_count = 0
except Exception:
cloudlog.exception("Error getting network status")
msg.deviceState.freeSpacePercent = get_available_percent(default=100.0)
msg.deviceState.memoryUsagePercent = int(round(psutil.virtual_memory().percent))
msg.deviceState.cpuUsagePercent = [int(round(n)) for n in psutil.cpu_percent(percpu=True)]
msg.deviceState.gpuUsagePercent = int(round(HARDWARE.get_gpu_usage_percent()))
msg.deviceState.networkType = network_type
msg.deviceState.networkStrength = network_strength
if network_info is not None:
msg.deviceState.networkInfo = network_info
if nvme_temps is not None:
msg.deviceState.nvmeTempC = nvme_temps
if modem_temps is not None:
msg.deviceState.modemTempC = modem_temps
msg.deviceState.screenBrightnessPercent = HARDWARE.get_screen_brightness()
msg.deviceState.batteryPercent = HARDWARE.get_battery_capacity()
msg.deviceState.batteryCurrent = HARDWARE.get_battery_current()
msg.deviceState.usbOnline = HARDWARE.get_usb_present()
current_filter.update(msg.deviceState.batteryCurrent / 1e6)
max_comp_temp = temp_filter.update(
max(max(msg.deviceState.cpuTempC), msg.deviceState.memoryTempC, max(msg.deviceState.gpuTempC))
)
if handle_fan is not None:
fan_speed = handle_fan(controller, max_comp_temp, fan_speed, onroad_conditions["ignition"])
msg.deviceState.fanSpeedPercentDesired = fan_speed
is_offroad_for_5_min = (started_ts is None) and ((not started_seen) or (off_ts is None) or (sec_since_boot() - off_ts > 60 * 5))
if is_offroad_for_5_min and max_comp_temp > OFFROAD_DANGER_TEMP:
# If device is offroad we want to cool down before going onroad
# since going onroad increases load and can make temps go over 107
thermal_status = ThermalStatus.danger
else:
current_band = THERMAL_BANDS[thermal_status]
band_idx = list(THERMAL_BANDS.keys()).index(thermal_status)
if current_band.min_temp is not None and max_comp_temp < current_band.min_temp:
thermal_status = list(THERMAL_BANDS.keys())[band_idx - 1]
elif current_band.max_temp is not None and max_comp_temp > current_band.max_temp:
thermal_status = list(THERMAL_BANDS.keys())[band_idx + 1]
# **** starting logic ****
# Ensure date/time are valid
now = datetime.datetime.utcnow()
startup_conditions["time_valid"] = (now.year > 2020) or (now.year == 2020 and now.month >= 10)
set_offroad_alert_if_changed("Offroad_InvalidTime", (not startup_conditions["time_valid"]))
startup_conditions["up_to_date"] = params.get("Offroad_ConnectivityNeeded") is None or params.get_bool("DisableUpdates") or params.get_bool("SnoozeUpdate")
startup_conditions["not_uninstalling"] = not params.get_bool("DoUninstall")
startup_conditions["accepted_terms"] = params.get("HasAcceptedTerms") == terms_version
# with 2% left, we killall, otherwise the phone will take a long time to boot
startup_conditions["free_space"] = msg.deviceState.freeSpacePercent > 2
startup_conditions["completed_training"] = params.get("CompletedTrainingVersion") == training_version or \
params.get_bool("Passive")
startup_conditions["not_driver_view"] = not params.get_bool("IsDriverViewEnabled")
startup_conditions["not_taking_snapshot"] = not params.get_bool("IsTakingSnapshot")
# if any CPU gets above 107 or the battery gets above 63, kill all processes
# controls will warn with CPU above 95 or battery above 60
onroad_conditions["device_temp_good"] = thermal_status < ThermalStatus.danger
set_offroad_alert_if_changed("Offroad_TemperatureTooHigh", (not onroad_conditions["device_temp_good"]))
if TICI:
set_offroad_alert_if_changed("Offroad_StorageMissing", (not Path("/data/media").is_mount()))
# Handle offroad/onroad transition
should_start = all(onroad_conditions.values())
if started_ts is None:
should_start = should_start and all(startup_conditions.values())
if should_start != should_start_prev or (count == 0):
params.put_bool("IsOnroad", should_start)
params.put_bool("IsOffroad", not should_start)
HARDWARE.set_power_save(not should_start)
if should_start:
off_ts = None
if started_ts is None:
started_ts = sec_since_boot()
started_seen = True
else:
if onroad_conditions["ignition"] and (startup_conditions != startup_conditions_prev):
cloudlog.event("Startup blocked", startup_conditions=startup_conditions, onroad_conditions=onroad_conditions)
started_ts = None
if off_ts is None:
off_ts = sec_since_boot()
# Offroad power monitoring
power_monitor.calculate(peripheralState, onroad_conditions["ignition"])
msg.deviceState.offroadPowerUsageUwh = power_monitor.get_power_used()
msg.deviceState.carBatteryCapacityUwh = max(0, power_monitor.get_car_battery_capacity())
current_power_draw = HARDWARE.get_current_power_draw() # pylint: disable=assignment-from-none
msg.deviceState.powerDrawW = current_power_draw if current_power_draw is not None else 0
# Check if we need to disable charging (handled by boardd)
msg.deviceState.chargingDisabled = power_monitor.should_disable_charging(onroad_conditions["ignition"], in_car, off_ts)
# Check if we need to shut down
if power_monitor.should_shutdown(peripheralState, onroad_conditions["ignition"], in_car, off_ts, started_seen):
cloudlog.info(f"shutting device down, offroad since {off_ts}")
# TODO: add function for blocking cloudlog instead of sleep
time.sleep(10)
HARDWARE.shutdown()
# If UI has crashed, set the brightness to reasonable non-zero value
ui_running = "ui" in (p.name for p in sm["managerState"].processes if p.running)
if ui_running_prev and not ui_running:
HARDWARE.set_screen_brightness(20)
ui_running_prev = ui_running
msg.deviceState.chargingError = current_filter.x > 0. and msg.deviceState.batteryPercent < 90 # if current is positive, then battery is being discharged
msg.deviceState.started = started_ts is not None
msg.deviceState.startedMonoTime = int(1e9*(started_ts or 0))
last_ping = params.get("LastAthenaPingTime")
if last_ping is not None:
msg.deviceState.lastAthenaPingTime = int(last_ping)
msg.deviceState.thermalStatus = thermal_status
pm.send("deviceState", msg)
if EON and not is_uno:
set_offroad_alert_if_changed("Offroad_ChargeDisabled", (not usb_power))
should_start_prev = should_start
startup_conditions_prev = startup_conditions.copy()
# report to server once every 10 minutes
if (count % int(600. / DT_TRML)) == 0:
if EON and started_ts is None and msg.deviceState.memoryUsagePercent > 40:
cloudlog.event("High offroad memory usage", mem=msg.deviceState.memoryUsagePercent)
cloudlog.event("STATUS_PACKET",
count=count,
pandaStates=(strip_deprecated_keys(pandaStates.to_dict()) if pandaStates else None),
peripheralState=strip_deprecated_keys(peripheralState.to_dict()),
location=(strip_deprecated_keys(sm["gpsLocationExternal"].to_dict()) if sm.alive["gpsLocationExternal"] else None),
deviceState=strip_deprecated_keys(msg.to_dict()))
count += 1
def thermald_thread(end_event, hw_queue):
pm = messaging.PubMaster(['deviceState'])
sm = messaging.SubMaster([
"peripheralState", "gpsLocationExternal", "controlsState",
"pandaStates"
],
poll=["pandaStates"])
count = 0
onroad_conditions: Dict[str, bool] = {
"ignition": False,
}
startup_conditions: Dict[str, bool] = {}
startup_conditions_prev: Dict[str, bool] = {}
off_ts = None
started_ts = None
started_seen = False
thermal_status = ThermalStatus.green
last_hw_state = HardwareState(
network_type=NetworkType.none,
network_metered=False,
network_strength=NetworkStrength.unknown,
network_info=None,
nvme_temps=[],
modem_temps=[],
wifi_address='N/A',
)
current_filter = FirstOrderFilter(0., CURRENT_TAU, DT_TRML)
temp_filter = FirstOrderFilter(0., TEMP_TAU, DT_TRML)
should_start_prev = False
in_car = False
engaged_prev = False
params = Params()
power_monitor = PowerMonitoring()
HARDWARE.initialize_hardware()
thermal_config = HARDWARE.get_thermal_config()
fan_controller = None
restart_triggered_ts = 0.
panda_state_ts = 0.
while not end_event.is_set():
sm.update(PANDA_STATES_TIMEOUT)
pandaStates = sm['pandaStates']
peripheralState = sm['peripheralState']
msg = read_thermal(thermal_config)
# neokii
if sec_since_boot() - restart_triggered_ts < 5.:
onroad_conditions["not_restart_triggered"] = False
else:
onroad_conditions["not_restart_triggered"] = True
if params.get_bool("SoftRestartTriggered"):
params.put_bool("SoftRestartTriggered", False)
restart_triggered_ts = sec_since_boot()
if sm.updated['pandaStates'] and len(pandaStates) > 0:
# Set ignition based on any panda connected
onroad_conditions["ignition"] = any(
ps.ignitionLine or ps.ignitionCan for ps in pandaStates
if ps.pandaType != log.PandaState.PandaType.unknown)
pandaState = pandaStates[0]
if pandaState.pandaType != log.PandaState.PandaType.unknown:
panda_state_ts = sec_since_boot()
in_car = pandaState.harnessStatus != log.PandaState.HarnessStatus.notConnected
# Setup fan handler on first connect to panda
if fan_controller is None and peripheralState.pandaType != log.PandaState.PandaType.unknown:
if TICI:
fan_controller = TiciFanController()
try:
last_hw_state = hw_queue.get_nowait()
except queue.Empty:
pass
msg.deviceState.freeSpacePercent = get_available_percent(default=100.0)
msg.deviceState.memoryUsagePercent = int(
round(psutil.virtual_memory().percent))
msg.deviceState.cpuUsagePercent = [
int(round(n)) for n in psutil.cpu_percent(percpu=True)
]
msg.deviceState.gpuUsagePercent = int(
round(HARDWARE.get_gpu_usage_percent()))
msg.deviceState.networkType = last_hw_state.network_type
msg.deviceState.networkMetered = last_hw_state.network_metered
msg.deviceState.networkStrength = last_hw_state.network_strength
if last_hw_state.network_info is not None:
msg.deviceState.networkInfo = last_hw_state.network_info
msg.deviceState.nvmeTempC = last_hw_state.nvme_temps
msg.deviceState.modemTempC = last_hw_state.modem_temps
msg.deviceState.wifiIpAddress = last_hw_state.wifi_address
msg.deviceState.screenBrightnessPercent = HARDWARE.get_screen_brightness(
)
msg.deviceState.batteryPercent = HARDWARE.get_battery_capacity()
msg.deviceState.batteryCurrent = HARDWARE.get_battery_current()
msg.deviceState.usbOnline = HARDWARE.get_usb_present()
current_filter.update(msg.deviceState.batteryCurrent / 1e6)
max_comp_temp = temp_filter.update(
max(max(msg.deviceState.cpuTempC), msg.deviceState.memoryTempC,
max(msg.deviceState.gpuTempC)))
if fan_controller is not None:
msg.deviceState.fanSpeedPercentDesired = fan_controller.update(
max_comp_temp, onroad_conditions["ignition"])
is_offroad_for_5_min = (started_ts is None) and (
(not started_seen) or (off_ts is None) or
(sec_since_boot() - off_ts > 60 * 5))
if is_offroad_for_5_min and max_comp_temp > OFFROAD_DANGER_TEMP:
# If device is offroad we want to cool down before going onroad
# since going onroad increases load and can make temps go over 107
thermal_status = ThermalStatus.danger
else:
current_band = THERMAL_BANDS[thermal_status]
band_idx = list(THERMAL_BANDS.keys()).index(thermal_status)
if current_band.min_temp is not None and max_comp_temp < current_band.min_temp:
thermal_status = list(THERMAL_BANDS.keys())[band_idx - 1]
elif current_band.max_temp is not None and max_comp_temp > current_band.max_temp:
thermal_status = list(THERMAL_BANDS.keys())[band_idx + 1]
# **** starting logic ****
# Ensure date/time are valid
now = datetime.datetime.utcnow()
startup_conditions[
"time_valid"] = True #(now.year > 2020) or (now.year == 2020 and now.month >= 10)
set_offroad_alert_if_changed("Offroad_InvalidTime",
(not startup_conditions["time_valid"]))
startup_conditions[
"up_to_date"] = True #params.get("Offroad_ConnectivityNeeded") is None or params.get_bool("DisableUpdates") or params.get_bool("SnoozeUpdate")
startup_conditions["not_uninstalling"] = not params.get_bool(
"DoUninstall")
startup_conditions["accepted_terms"] = params.get(
"HasAcceptedTerms") == terms_version
# with 2% left, we killall, otherwise the phone will take a long time to boot
startup_conditions["free_space"] = msg.deviceState.freeSpacePercent > 2
startup_conditions["completed_training"] = params.get("CompletedTrainingVersion") == training_version or \
params.get_bool("Passive")
startup_conditions["not_driver_view"] = not params.get_bool(
"IsDriverViewEnabled")
startup_conditions["not_taking_snapshot"] = not params.get_bool(
"IsTakingSnapshot")
# if any CPU gets above 107 or the battery gets above 63, kill all processes
# controls will warn with CPU above 95 or battery above 60
onroad_conditions[
"device_temp_good"] = thermal_status < ThermalStatus.danger
set_offroad_alert_if_changed(
"Offroad_TemperatureTooHigh",
(not onroad_conditions["device_temp_good"]))
# TODO: this should move to TICI.initialize_hardware, but we currently can't import params there
if TICI:
if not os.path.isfile("/persist/comma/living-in-the-moment"):
if not Path("/data/media").is_mount():
set_offroad_alert_if_changed("Offroad_StorageMissing",
True)
else:
# check for bad NVMe
try:
with open("/sys/block/nvme0n1/device/model") as f:
model = f.read().strip()
if not model.startswith(
"Samsung SSD 980") and params.get(
"Offroad_BadNvme") is None:
set_offroad_alert_if_changed(
"Offroad_BadNvme", True)
cloudlog.event("Unsupported NVMe",
model=model,
error=True)
except Exception:
pass
# Handle offroad/onroad transition
should_start = all(onroad_conditions.values())
if started_ts is None:
should_start = should_start and all(startup_conditions.values())
if should_start != should_start_prev or (count == 0):
params.put_bool("IsOnroad", should_start)
params.put_bool("IsOffroad", not should_start)
params.put_bool("IsEngaged", False)
engaged_prev = False
HARDWARE.set_power_save(not should_start)
if sm.updated['controlsState']:
engaged = sm['controlsState'].enabled
if engaged != engaged_prev:
params.put_bool("IsEngaged", engaged)
engaged_prev = engaged
try:
with open('/dev/kmsg', 'w') as kmsg:
kmsg.write(f"<3>[thermald] engaged: {engaged}\n")
except Exception:
pass
if should_start:
off_ts = None
if started_ts is None:
started_ts = sec_since_boot()
started_seen = True
else:
if onroad_conditions["ignition"] and (startup_conditions !=
startup_conditions_prev):
cloudlog.event("Startup blocked",
startup_conditions=startup_conditions,
onroad_conditions=onroad_conditions)
started_ts = None
if off_ts is None:
off_ts = sec_since_boot()
# Offroad power monitoring
power_monitor.calculate(peripheralState, onroad_conditions["ignition"])
msg.deviceState.offroadPowerUsageUwh = power_monitor.get_power_used()
msg.deviceState.carBatteryCapacityUwh = max(
0, power_monitor.get_car_battery_capacity())
current_power_draw = HARDWARE.get_current_power_draw() # pylint: disable=assignment-from-none
if current_power_draw is not None:
statlog.sample("power_draw", current_power_draw)
msg.deviceState.powerDrawW = current_power_draw
else:
msg.deviceState.powerDrawW = 0
# Check if we need to disable charging (handled by boardd)
msg.deviceState.chargingDisabled = power_monitor.should_disable_charging(
onroad_conditions["ignition"], in_car, off_ts)
# Check if we need to shut down
if power_monitor.should_shutdown(peripheralState,
onroad_conditions["ignition"], in_car,
off_ts, started_seen):
cloudlog.warning(f"shutting device down, offroad since {off_ts}")
params.put_bool("DoShutdown", True)
msg.deviceState.chargingError = current_filter.x > 0. and msg.deviceState.batteryPercent < 90 # if current is positive, then battery is being discharged
msg.deviceState.started = started_ts is not None
msg.deviceState.startedMonoTime = int(1e9 * (started_ts or 0))
last_ping = params.get("LastAthenaPingTime")
if last_ping is not None:
msg.deviceState.lastAthenaPingTime = int(last_ping)
msg.deviceState.thermalStatus = thermal_status
pm.send("deviceState", msg)
should_start_prev = should_start
startup_conditions_prev = startup_conditions.copy()
# Log to statsd
statlog.gauge("free_space_percent", msg.deviceState.freeSpacePercent)
statlog.gauge("gpu_usage_percent", msg.deviceState.gpuUsagePercent)
statlog.gauge("memory_usage_percent",
msg.deviceState.memoryUsagePercent)
for i, usage in enumerate(msg.deviceState.cpuUsagePercent):
statlog.gauge(f"cpu{i}_usage_percent", usage)
for i, temp in enumerate(msg.deviceState.cpuTempC):
statlog.gauge(f"cpu{i}_temperature", temp)
for i, temp in enumerate(msg.deviceState.gpuTempC):
statlog.gauge(f"gpu{i}_temperature", temp)
statlog.gauge("memory_temperature", msg.deviceState.memoryTempC)
statlog.gauge("ambient_temperature", msg.deviceState.ambientTempC)
for i, temp in enumerate(msg.deviceState.pmicTempC):
statlog.gauge(f"pmic{i}_temperature", temp)
for i, temp in enumerate(last_hw_state.nvme_temps):
statlog.gauge(f"nvme_temperature{i}", temp)
for i, temp in enumerate(last_hw_state.modem_temps):
statlog.gauge(f"modem_temperature{i}", temp)
statlog.gauge("fan_speed_percent_desired",
msg.deviceState.fanSpeedPercentDesired)
statlog.gauge("screen_brightness_percent",
msg.deviceState.screenBrightnessPercent)
# report to server once every 10 minutes
if (count % int(600. / DT_TRML)) == 0:
cloudlog.event(
"STATUS_PACKET",
count=count,
pandaStates=[
strip_deprecated_keys(p.to_dict()) for p in pandaStates
],
peripheralState=strip_deprecated_keys(
peripheralState.to_dict()),
location=(strip_deprecated_keys(
sm["gpsLocationExternal"].to_dict())
if sm.alive["gpsLocationExternal"] else None),
deviceState=strip_deprecated_keys(msg.to_dict()))
count += 1
def thermald_thread():
health_timeout = int(1000 * 2.5 * DT_TRML) # 2.5x the expected health frequency
# now loop
thermal_sock = messaging.pub_sock('thermal')
health_sock = messaging.sub_sock('health', timeout=health_timeout)
location_sock = messaging.sub_sock('gpsLocation')
fan_speed = 0
count = 0
startup_conditions = {
"ignition": False,
}
startup_conditions_prev = startup_conditions.copy()
off_ts = None
started_ts = None
started_seen = False
thermal_status = ThermalStatus.green
usb_power = True
current_branch = get_git_branch()
network_type = NetworkType.none
network_strength = NetworkStrength.unknown
current_filter = FirstOrderFilter(0., CURRENT_TAU, DT_TRML)
cpu_temp_filter = FirstOrderFilter(0., CPU_TEMP_TAU, DT_TRML)
health_prev = None
should_start_prev = False
handle_fan = None
is_uno = False
has_relay = False
params = Params()
pm = PowerMonitoring()
no_panda_cnt = 0
thermal_config = get_thermal_config()
while 1:
health = messaging.recv_sock(health_sock, wait=True)
location = messaging.recv_sock(location_sock)
location = location.gpsLocation if location else None
msg = read_thermal(thermal_config)
if health is not None:
usb_power = health.health.usbPowerMode != log.HealthData.UsbPowerMode.client
# If we lose connection to the panda, wait 5 seconds before going offroad
if health.health.hwType == log.HealthData.HwType.unknown:
no_panda_cnt += 1
if no_panda_cnt > DISCONNECT_TIMEOUT / DT_TRML:
if startup_conditions["ignition"]:
cloudlog.error("Lost panda connection while onroad")
startup_conditions["ignition"] = False
else:
no_panda_cnt = 0
startup_conditions["ignition"] = health.health.ignitionLine or health.health.ignitionCan
# Setup fan handler on first connect to panda
if handle_fan is None and health.health.hwType != log.HealthData.HwType.unknown:
is_uno = health.health.hwType == log.HealthData.HwType.uno
has_relay = health.health.hwType in [log.HealthData.HwType.blackPanda, log.HealthData.HwType.uno, log.HealthData.HwType.dos]
if (not EON) or is_uno:
cloudlog.info("Setting up UNO fan handler")
handle_fan = handle_fan_uno
else:
cloudlog.info("Setting up EON fan handler")
setup_eon_fan()
handle_fan = handle_fan_eon
# Handle disconnect
if health_prev is not None:
if health.health.hwType == log.HealthData.HwType.unknown and \
health_prev.health.hwType != log.HealthData.HwType.unknown:
params.panda_disconnect()
health_prev = health
# get_network_type is an expensive call. update every 10s
if (count % int(10. / DT_TRML)) == 0:
try:
network_type = HARDWARE.get_network_type()
network_strength = HARDWARE.get_network_strength(network_type)
except Exception:
cloudlog.exception("Error getting network status")
msg.thermal.freeSpace = get_available_percent(default=100.0) / 100.0
msg.thermal.memUsedPercent = int(round(psutil.virtual_memory().percent))
msg.thermal.cpuPerc = int(round(psutil.cpu_percent()))
msg.thermal.networkType = network_type
msg.thermal.networkStrength = network_strength
msg.thermal.batteryPercent = get_battery_capacity()
msg.thermal.batteryStatus = get_battery_status()
msg.thermal.batteryCurrent = get_battery_current()
msg.thermal.batteryVoltage = get_battery_voltage()
msg.thermal.usbOnline = get_usb_present()
# Fake battery levels on uno for frame
if (not EON) or is_uno:
msg.thermal.batteryPercent = 100
msg.thermal.batteryStatus = "Charging"
msg.thermal.bat = 0
current_filter.update(msg.thermal.batteryCurrent / 1e6)
# TODO: add car battery voltage check
max_cpu_temp = cpu_temp_filter.update(max(msg.thermal.cpu))
max_comp_temp = max(max_cpu_temp, msg.thermal.mem, max(msg.thermal.gpu))
bat_temp = msg.thermal.bat
if handle_fan is not None:
fan_speed = handle_fan(max_cpu_temp, bat_temp, fan_speed, startup_conditions["ignition"])
msg.thermal.fanSpeed = fan_speed
# If device is offroad we want to cool down before going onroad
# since going onroad increases load and can make temps go over 107
# We only do this if there is a relay that prevents the car from faulting
is_offroad_for_5_min = (started_ts is None) and ((not started_seen) or (off_ts is None) or (sec_since_boot() - off_ts > 60 * 5))
if max_cpu_temp > 107. or bat_temp >= 63. or (has_relay and is_offroad_for_5_min and max_cpu_temp > 70.0):
# onroad not allowed
thermal_status = ThermalStatus.danger
elif max_comp_temp > 96.0 or bat_temp > 60.:
# hysteresis between onroad not allowed and engage not allowed
thermal_status = clip(thermal_status, ThermalStatus.red, ThermalStatus.danger)
elif max_cpu_temp > 94.0:
# hysteresis between engage not allowed and uploader not allowed
thermal_status = clip(thermal_status, ThermalStatus.yellow, ThermalStatus.red)
elif max_cpu_temp > 80.0:
# uploader not allowed
thermal_status = ThermalStatus.yellow
elif max_cpu_temp > 75.0:
# hysteresis between uploader not allowed and all good
thermal_status = clip(thermal_status, ThermalStatus.green, ThermalStatus.yellow)
else:
# all good
thermal_status = ThermalStatus.green
# **** starting logic ****
# Check for last update time and display alerts if needed
now = datetime.datetime.utcnow()
# show invalid date/time alert
startup_conditions["time_valid"] = now.year >= 2019
set_offroad_alert_if_changed("Offroad_InvalidTime", (not startup_conditions["time_valid"]))
# Show update prompt
try:
last_update = datetime.datetime.fromisoformat(params.get("LastUpdateTime", encoding='utf8'))
except (TypeError, ValueError):
last_update = now
dt = now - last_update
update_failed_count = params.get("UpdateFailedCount")
update_failed_count = 0 if update_failed_count is None else int(update_failed_count)
last_update_exception = params.get("LastUpdateException", encoding='utf8')
if update_failed_count > 15 and last_update_exception is not None:
if current_branch in ["release2", "dashcam"]:
extra_text = "Ensure the software is correctly installed"
else:
extra_text = last_update_exception
set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt", False)
set_offroad_alert_if_changed("Offroad_UpdateFailed", True, extra_text=extra_text)
elif dt.days > DAYS_NO_CONNECTIVITY_MAX and update_failed_count > 1:
set_offroad_alert_if_changed("Offroad_UpdateFailed", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", True)
elif dt.days > DAYS_NO_CONNECTIVITY_PROMPT:
remaining_time = str(max(DAYS_NO_CONNECTIVITY_MAX - dt.days, 0))
set_offroad_alert_if_changed("Offroad_UpdateFailed", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt", True, extra_text=f"{remaining_time} days.")
else:
set_offroad_alert_if_changed("Offroad_UpdateFailed", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt", False)
startup_conditions["not_uninstalling"] = not params.get("DoUninstall") == b"1"
startup_conditions["accepted_terms"] = params.get("HasAcceptedTerms") == terms_version
completed_training = params.get("CompletedTrainingVersion") == training_version
panda_signature = params.get("PandaFirmware")
startup_conditions["fw_version_match"] = (panda_signature is None) or (panda_signature == FW_SIGNATURE) # don't show alert is no panda is connected (None)
set_offroad_alert_if_changed("Offroad_PandaFirmwareMismatch", (not startup_conditions["fw_version_match"]))
# with 2% left, we killall, otherwise the phone will take a long time to boot
startup_conditions["free_space"] = msg.thermal.freeSpace > 0.02
startup_conditions["completed_training"] = completed_training or (current_branch in ['dashcam', 'dashcam-staging'])
startup_conditions["not_driver_view"] = not params.get("IsDriverViewEnabled") == b"1"
startup_conditions["not_taking_snapshot"] = not params.get("IsTakingSnapshot") == b"1"
# if any CPU gets above 107 or the battery gets above 63, kill all processes
# controls will warn with CPU above 95 or battery above 60
startup_conditions["device_temp_good"] = thermal_status < ThermalStatus.danger
set_offroad_alert_if_changed("Offroad_TemperatureTooHigh", (not startup_conditions["device_temp_good"]))
should_start = all(startup_conditions.values())
if should_start:
if not should_start_prev:
params.delete("IsOffroad")
off_ts = None
if started_ts is None:
started_ts = sec_since_boot()
started_seen = True
os.system('echo performance > /sys/class/devfreq/soc:qcom,cpubw/governor')
else:
if startup_conditions["ignition"] and (startup_conditions != startup_conditions_prev):
cloudlog.event("Startup blocked", startup_conditions=startup_conditions)
if should_start_prev or (count == 0):
params.put("IsOffroad", "1")
started_ts = None
if off_ts is None:
off_ts = sec_since_boot()
os.system('echo powersave > /sys/class/devfreq/soc:qcom,cpubw/governor')
# Offroad power monitoring
pm.calculate(health)
msg.thermal.offroadPowerUsage = pm.get_power_used()
msg.thermal.carBatteryCapacity = max(0, pm.get_car_battery_capacity())
# Check if we need to disable charging (handled by boardd)
msg.thermal.chargingDisabled = pm.should_disable_charging(health, off_ts)
# Check if we need to shut down
if pm.should_shutdown(health, off_ts, started_seen, LEON):
cloudlog.info(f"shutting device down, offroad since {off_ts}")
# TODO: add function for blocking cloudlog instead of sleep
time.sleep(10)
os.system('LD_LIBRARY_PATH="" svc power shutdown')
msg.thermal.chargingError = current_filter.x > 0. and msg.thermal.batteryPercent < 90 # if current is positive, then battery is being discharged
msg.thermal.started = started_ts is not None
msg.thermal.startedTs = int(1e9*(started_ts or 0))
msg.thermal.thermalStatus = thermal_status
thermal_sock.send(msg.to_bytes())
set_offroad_alert_if_changed("Offroad_ChargeDisabled", (not usb_power))
should_start_prev = should_start
startup_conditions_prev = startup_conditions.copy()
# report to server once per minute
if (count % int(60. / DT_TRML)) == 0:
cloudlog.event("STATUS_PACKET",
count=count,
health=(health.to_dict() if health else None),
location=(location.to_dict() if location else None),
thermal=msg.to_dict())
count += 1
def thermald_thread():
pm = messaging.PubMaster(['deviceState'])
pandaState_timeout = int(1000 * 2.5 *
DT_TRML) # 2.5x the expected pandaState frequency
pandaState_sock = messaging.sub_sock('pandaState',
timeout=pandaState_timeout)
location_sock = messaging.sub_sock('gpsLocationExternal')
managerState_sock = messaging.sub_sock('managerState', conflate=True)
fan_speed = 0
count = 0
startup_conditions = {
"ignition": False,
}
startup_conditions_prev = startup_conditions.copy()
off_ts = None
started_ts = None
started_seen = False
thermal_status = ThermalStatus.green
usb_power = True
current_branch = get_git_branch()
network_type = NetworkType.none
network_strength = NetworkStrength.unknown
current_filter = FirstOrderFilter(0., CURRENT_TAU, DT_TRML)
cpu_temp_filter = FirstOrderFilter(0., CPU_TEMP_TAU, DT_TRML)
pandaState_prev = None
should_start_prev = False
handle_fan = None
is_uno = False
ui_running_prev = False
params = Params()
power_monitor = PowerMonitoring()
no_panda_cnt = 0
thermal_config = HARDWARE.get_thermal_config()
# CPR3 logging
if EON:
base_path = "/sys/kernel/debug/cpr3-regulator/"
cpr_files = [p for p in Path(base_path).glob("**/*") if p.is_file()]
cpr_data = {}
for cf in cpr_files:
with open(cf, "r") as f:
try:
cpr_data[str(cf)] = f.read().strip()
except Exception:
pass
cloudlog.event("CPR", data=cpr_data)
while 1:
pandaState = messaging.recv_sock(pandaState_sock, wait=True)
msg = read_thermal(thermal_config)
if pandaState is not None:
usb_power = pandaState.pandaState.usbPowerMode != log.PandaState.UsbPowerMode.client
# If we lose connection to the panda, wait 5 seconds before going offroad
if pandaState.pandaState.pandaType == log.PandaState.PandaType.unknown:
no_panda_cnt += 1
if no_panda_cnt > DISCONNECT_TIMEOUT / DT_TRML:
if startup_conditions["ignition"]:
cloudlog.error("Lost panda connection while onroad")
startup_conditions["ignition"] = False
else:
no_panda_cnt = 0
startup_conditions[
"ignition"] = pandaState.pandaState.ignitionLine or pandaState.pandaState.ignitionCan
startup_conditions[
"hardware_supported"] = pandaState.pandaState.pandaType not in [
log.PandaState.PandaType.whitePanda,
log.PandaState.PandaType.greyPanda
]
set_offroad_alert_if_changed(
"Offroad_HardwareUnsupported",
not startup_conditions["hardware_supported"])
# Setup fan handler on first connect to panda
if handle_fan is None and pandaState.pandaState.pandaType != log.PandaState.PandaType.unknown:
is_uno = pandaState.pandaState.pandaType == log.PandaState.PandaType.uno
if (not EON) or is_uno:
cloudlog.info("Setting up UNO fan handler")
handle_fan = handle_fan_uno
else:
cloudlog.info("Setting up EON fan handler")
setup_eon_fan()
handle_fan = handle_fan_eon
# Handle disconnect
if pandaState_prev is not None:
if pandaState.pandaState.pandaType == log.PandaState.PandaType.unknown and \
pandaState_prev.pandaState.pandaType != log.PandaState.PandaType.unknown:
params.panda_disconnect()
pandaState_prev = pandaState
# get_network_type is an expensive call. update every 10s
if (count % int(10. / DT_TRML)) == 0:
try:
network_type = HARDWARE.get_network_type()
network_strength = HARDWARE.get_network_strength(network_type)
except Exception:
cloudlog.exception("Error getting network status")
msg.deviceState.freeSpacePercent = get_available_percent(default=100.0)
msg.deviceState.memoryUsagePercent = int(
round(psutil.virtual_memory().percent))
msg.deviceState.cpuUsagePercent = int(round(psutil.cpu_percent()))
msg.deviceState.networkType = network_type
msg.deviceState.networkStrength = network_strength
msg.deviceState.batteryPercent = HARDWARE.get_battery_capacity()
msg.deviceState.batteryStatus = HARDWARE.get_battery_status()
msg.deviceState.batteryCurrent = HARDWARE.get_battery_current()
msg.deviceState.batteryVoltage = HARDWARE.get_battery_voltage()
msg.deviceState.usbOnline = HARDWARE.get_usb_present()
# Fake battery levels on uno for frame
if (not EON) or is_uno:
msg.deviceState.batteryPercent = 100
msg.deviceState.batteryStatus = "Charging"
msg.deviceState.batteryTempC = 0
current_filter.update(msg.deviceState.batteryCurrent / 1e6)
# TODO: add car battery voltage check
max_cpu_temp = cpu_temp_filter.update(max(msg.deviceState.cpuTempC))
max_comp_temp = max(max_cpu_temp, msg.deviceState.memoryTempC,
max(msg.deviceState.gpuTempC))
bat_temp = msg.deviceState.batteryTempC
if handle_fan is not None:
fan_speed = handle_fan(max_cpu_temp, bat_temp, fan_speed,
startup_conditions["ignition"])
msg.deviceState.fanSpeedPercentDesired = fan_speed
# If device is offroad we want to cool down before going onroad
# since going onroad increases load and can make temps go over 107
# We only do this if there is a relay that prevents the car from faulting
is_offroad_for_5_min = (started_ts is None) and (
(not started_seen) or (off_ts is None) or
(sec_since_boot() - off_ts > 60 * 5))
if max_cpu_temp > 107. or bat_temp >= 63. or (is_offroad_for_5_min
and max_cpu_temp > 70.0):
# onroad not allowed
thermal_status = ThermalStatus.danger
elif max_comp_temp > 96.0 or bat_temp > 60.:
# hysteresis between onroad not allowed and engage not allowed
thermal_status = clip(thermal_status, ThermalStatus.red,
ThermalStatus.danger)
elif max_cpu_temp > 94.0:
# hysteresis between engage not allowed and uploader not allowed
thermal_status = clip(thermal_status, ThermalStatus.yellow,
ThermalStatus.red)
elif max_cpu_temp > 80.0:
# uploader not allowed
thermal_status = ThermalStatus.yellow
elif max_cpu_temp > 75.0:
# hysteresis between uploader not allowed and all good
thermal_status = clip(thermal_status, ThermalStatus.green,
ThermalStatus.yellow)
else:
thermal_status = ThermalStatus.green # default to good condition
# **** starting logic ****
# Check for last update time and display alerts if needed
now = datetime.datetime.utcnow()
# show invalid date/time alert
startup_conditions["time_valid"] = (now.year > 2020) or (
now.year == 2020 and now.month >= 10)
set_offroad_alert_if_changed("Offroad_InvalidTime",
(not startup_conditions["time_valid"]))
# Show update prompt
try:
last_update = datetime.datetime.fromisoformat(
params.get("LastUpdateTime", encoding='utf8'))
except (TypeError, ValueError):
last_update = now
dt = now - last_update
update_failed_count = params.get("UpdateFailedCount")
update_failed_count = 0 if update_failed_count is None else int(
update_failed_count)
last_update_exception = params.get("LastUpdateException",
encoding='utf8')
if update_failed_count > 15 and last_update_exception is not None:
if current_branch in ["release2", "dashcam"]:
extra_text = "Ensure the software is correctly installed"
else:
extra_text = last_update_exception
set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt",
False)
set_offroad_alert_if_changed("Offroad_UpdateFailed",
True,
extra_text=extra_text)
elif dt.days > DAYS_NO_CONNECTIVITY_MAX and update_failed_count > 1:
set_offroad_alert_if_changed("Offroad_UpdateFailed", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt",
False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", True)
elif dt.days > DAYS_NO_CONNECTIVITY_PROMPT:
remaining_time = str(max(DAYS_NO_CONNECTIVITY_MAX - dt.days, 0))
set_offroad_alert_if_changed("Offroad_UpdateFailed", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt",
True,
extra_text=f"{remaining_time} days.")
else:
set_offroad_alert_if_changed("Offroad_UpdateFailed", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt",
False)
startup_conditions["up_to_date"] = params.get(
"Offroad_ConnectivityNeeded") is None or params.get(
"DisableUpdates") == b"1"
startup_conditions["not_uninstalling"] = not params.get(
"DoUninstall") == b"1"
startup_conditions["accepted_terms"] = params.get(
"HasAcceptedTerms") == terms_version
panda_signature = params.get("PandaFirmware")
startup_conditions["fw_version_match"] = (panda_signature is None) or (
panda_signature == FW_SIGNATURE
) # don't show alert is no panda is connected (None)
set_offroad_alert_if_changed(
"Offroad_PandaFirmwareMismatch",
(not startup_conditions["fw_version_match"]))
# with 2% left, we killall, otherwise the phone will take a long time to boot
startup_conditions["free_space"] = msg.deviceState.freeSpacePercent > 2
startup_conditions["completed_training"] = params.get("CompletedTrainingVersion") == training_version or \
(current_branch in ['dashcam', 'dashcam-staging'])
startup_conditions["not_driver_view"] = not params.get(
"IsDriverViewEnabled") == b"1"
startup_conditions["not_taking_snapshot"] = not params.get(
"IsTakingSnapshot") == b"1"
# if any CPU gets above 107 or the battery gets above 63, kill all processes
# controls will warn with CPU above 95 or battery above 60
startup_conditions[
"device_temp_good"] = thermal_status < ThermalStatus.danger
set_offroad_alert_if_changed(
"Offroad_TemperatureTooHigh",
(not startup_conditions["device_temp_good"]))
# Handle offroad/onroad transition
should_start = all(startup_conditions.values())
if should_start:
if not should_start_prev:
params.delete("IsOffroad")
if TICI and DISABLE_LTE_ONROAD:
os.system("sudo systemctl stop --no-block lte")
off_ts = None
if started_ts is None:
started_ts = sec_since_boot()
started_seen = True
else:
if startup_conditions["ignition"] and (startup_conditions !=
startup_conditions_prev):
cloudlog.event("Startup blocked",
startup_conditions=startup_conditions)
if should_start_prev or (count == 0):
params.put("IsOffroad", "1")
if TICI and DISABLE_LTE_ONROAD:
os.system("sudo systemctl start --no-block lte")
started_ts = None
if off_ts is None:
off_ts = sec_since_boot()
# Offroad power monitoring
power_monitor.calculate(pandaState)
msg.deviceState.offroadPowerUsageUwh = power_monitor.get_power_used()
msg.deviceState.carBatteryCapacityUwh = max(
0, power_monitor.get_car_battery_capacity())
# Check if we need to disable charging (handled by boardd)
msg.deviceState.chargingDisabled = power_monitor.should_disable_charging(
pandaState, off_ts)
# Check if we need to shut down
if power_monitor.should_shutdown(pandaState, off_ts, started_seen):
cloudlog.info(f"shutting device down, offroad since {off_ts}")
# TODO: add function for blocking cloudlog instead of sleep
time.sleep(10)
HARDWARE.shutdown()
# If UI has crashed, set the brightness to reasonable non-zero value
manager_state = messaging.recv_one_or_none(managerState_sock)
if manager_state is not None:
ui_running = "ui" in (p.name
for p in manager_state.managerState.processes
if p.running)
if ui_running_prev and not ui_running:
HARDWARE.set_screen_brightness(20)
ui_running_prev = ui_running
msg.deviceState.chargingError = current_filter.x > 0. and msg.deviceState.batteryPercent < 90 # if current is positive, then battery is being discharged
msg.deviceState.started = started_ts is not None
msg.deviceState.startedMonoTime = int(1e9 * (started_ts or 0))
msg.deviceState.thermalStatus = thermal_status
pm.send("deviceState", msg)
if EON and not is_uno:
set_offroad_alert_if_changed("Offroad_ChargeDisabled",
(not usb_power))
should_start_prev = should_start
startup_conditions_prev = startup_conditions.copy()
# report to server once every 10 minutes
if (count % int(600. / DT_TRML)) == 0:
location = messaging.recv_sock(location_sock)
cloudlog.event("STATUS_PACKET",
count=count,
pandaState=(strip_deprecated_keys(
pandaState.to_dict()) if pandaState else None),
location=(strip_deprecated_keys(
location.gpsLocationExternal.to_dict())
if location else None),
deviceState=strip_deprecated_keys(msg.to_dict()))
count += 1
def thermald_thread():
pm = messaging.PubMaster(['deviceState'])
pandaState_timeout = int(1000 * 2.5 * DT_TRML) # 2.5x the expected pandaState frequency
pandaState_sock = messaging.sub_sock('pandaStates', timeout=pandaState_timeout)
sm = messaging.SubMaster(["peripheralState", "gpsLocationExternal", "managerState"])
fan_speed = 0
count = 0
startup_conditions = {
"ignition": False,
}
startup_conditions_prev = startup_conditions.copy()
off_ts = None
started_ts = None
started_seen = False
thermal_status = ThermalStatus.green
usb_power = True
network_type = NetworkType.none
network_strength = NetworkStrength.unknown
network_info = None
modem_version = None
registered_count = 0
nvme_temps = None
modem_temps = None
current_filter = FirstOrderFilter(0., CURRENT_TAU, DT_TRML)
temp_filter = FirstOrderFilter(0., TEMP_TAU, DT_TRML)
pandaState_prev = None
should_start_prev = False
in_car = False
handle_fan = None
is_uno = False
ui_running_prev = False
power_monitor = PowerMonitoring()
no_panda_cnt = 0
HARDWARE.initialize_hardware()
thermal_config = HARDWARE.get_thermal_config()
# TODO: use PI controller for UNO
controller = PIController(k_p=0, k_i=2e-3, neg_limit=-80, pos_limit=0, rate=(1 / DT_TRML))
# Leave flag for loggerd to indicate device was left onroad
if params.get_bool("IsOnroad"):
params.put_bool("BootedOnroad", True)
# dp
peripheralStateLast = None
dp_no_batt = params.get_bool("dp_no_batt")
dp_temp_monitor = True
dp_last_modified_temp_monitor = None
dp_auto_shutdown = False
dp_last_modified_auto_shutdown = None
dp_auto_shutdown_in = 90
dp_last_modified_auto_shutdown_in = None
dp_fan_mode = 0
dp_fan_mode_last = None
modified = None
last_modified = None
last_modified_check = None
dp_no_offroad_fix = params.get_bool('dp_no_offroad_fix')
if JETSON:
handle_fan = handle_fan_jetson
while True:
# dp - load temp monitor conf
last_modified_check, modified = get_last_modified(LAST_MODIFIED_THERMALD, last_modified_check, modified)
if last_modified != modified:
dp_temp_monitor, dp_last_modified_temp_monitor = param_get_if_updated("dp_temp_monitor", "bool", dp_temp_monitor, dp_last_modified_temp_monitor)
dp_auto_shutdown, dp_last_modified_auto_shutdown = param_get_if_updated("dp_auto_shutdown", "bool", dp_auto_shutdown, dp_last_modified_auto_shutdown)
dp_auto_shutdown_in, dp_last_modified_auto_shutdown_in = param_get_if_updated("dp_auto_shutdown_in", "int", dp_auto_shutdown_in, dp_last_modified_auto_shutdown_in)
dp_fan_mode, dp_fan_mode_last = param_get_if_updated("dp_fan_mode", "int", dp_fan_mode, dp_fan_mode_last)
last_modified = modified
pandaStates = messaging.recv_sock(pandaState_sock, wait=True)
sm.update(0)
peripheralState = sm['peripheralState']
msg = read_thermal(thermal_config)
if pandaStates is not None and len(pandaStates.pandaStates) > 0:
pandaState = pandaStates.pandaStates[0]
# If we lose connection to the panda, wait 5 seconds before going offroad
if pandaState.pandaType == log.PandaState.PandaType.unknown:
no_panda_cnt += 1
if no_panda_cnt > DISCONNECT_TIMEOUT / DT_TRML:
if startup_conditions["ignition"]:
cloudlog.error("Lost panda connection while onroad")
startup_conditions["ignition"] = False
else:
no_panda_cnt = 0
startup_conditions["ignition"] = pandaState.ignitionLine or pandaState.ignitionCan
in_car = pandaState.harnessStatus != log.PandaState.HarnessStatus.notConnected
usb_power = peripheralState.usbPowerMode != log.PeripheralState.UsbPowerMode.client
# Setup fan handler on first connect to panda
if not JETSON and handle_fan is None and peripheralState.pandaType != log.PandaState.PandaType.unknown:
is_uno = peripheralState.pandaType == log.PandaState.PandaType.uno
if TICI:
cloudlog.info("Setting up TICI fan handler")
handle_fan = handle_fan_tici
elif is_uno or PC:
cloudlog.info("Setting up UNO fan handler")
handle_fan = handle_fan_uno
else:
cloudlog.info("Setting up EON fan handler")
setup_eon_fan()
handle_fan = handle_fan_eon
# Handle disconnect
if pandaState_prev is not None:
if pandaState.pandaType == log.PandaState.PandaType.unknown and \
pandaState_prev.pandaType != log.PandaState.PandaType.unknown:
params.clear_all(ParamKeyType.CLEAR_ON_PANDA_DISCONNECT)
pandaState_prev = pandaState
# these are expensive calls. update every 10s
if (count % int(10. / DT_TRML)) == 0:
try:
network_type = HARDWARE.get_network_type()
network_strength = HARDWARE.get_network_strength(network_type)
network_info = HARDWARE.get_network_info() # pylint: disable=assignment-from-none
nvme_temps = HARDWARE.get_nvme_temperatures()
modem_temps = HARDWARE.get_modem_temperatures()
# Log modem version once
if modem_version is None:
modem_version = HARDWARE.get_modem_version() # pylint: disable=assignment-from-none
if modem_version is not None:
cloudlog.warning(f"Modem version: {modem_version}")
if TICI and (network_info.get('state', None) == "REGISTERED"):
registered_count += 1
else:
registered_count = 0
if registered_count > 10:
cloudlog.warning(f"Modem stuck in registered state {network_info}. nmcli conn up lte")
os.system("nmcli conn up lte")
registered_count = 0
except Exception:
cloudlog.exception("Error getting network status")
msg.deviceState.freeSpacePercent = get_available_percent(default=100.0)
msg.deviceState.memoryUsagePercent = int(round(psutil.virtual_memory().percent))
msg.deviceState.cpuUsagePercent = [int(round(n)) for n in psutil.cpu_percent(percpu=True)]
msg.deviceState.gpuUsagePercent = int(round(HARDWARE.get_gpu_usage_percent()))
msg.deviceState.networkType = network_type
msg.deviceState.networkStrength = network_strength
if network_info is not None:
msg.deviceState.networkInfo = network_info
if nvme_temps is not None:
msg.deviceState.nvmeTempC = nvme_temps
if modem_temps is not None:
msg.deviceState.modemTempC = modem_temps
msg.deviceState.screenBrightnessPercent = HARDWARE.get_screen_brightness()
msg.deviceState.batteryPercent = HARDWARE.get_battery_capacity()
msg.deviceState.batteryCurrent = HARDWARE.get_battery_current()
msg.deviceState.usbOnline = HARDWARE.get_usb_present()
# Fake battery levels on uno for frame
if dp_no_batt:
msg.deviceState.batteryPercent = 100
current_filter.update(msg.deviceState.batteryCurrent / 1e6)
max_comp_temp = temp_filter.update(
max(max(msg.deviceState.cpuTempC), msg.deviceState.memoryTempC, max(msg.deviceState.gpuTempC))
)
if handle_fan is not None:
fan_speed = handle_fan(dp_fan_mode, controller, max_comp_temp, fan_speed, startup_conditions["ignition"])
msg.deviceState.fanSpeedPercentDesired = fan_speed
is_offroad_for_5_min = (started_ts is None) and ((not started_seen) or (off_ts is None) or (sec_since_boot() - off_ts > 60 * 5))
if is_offroad_for_5_min and max_comp_temp > OFFROAD_DANGER_TEMP:
# If device is offroad we want to cool down before going onroad
# since going onroad increases load and can make temps go over 107
thermal_status = ThermalStatus.danger
else:
current_band = THERMAL_BANDS[thermal_status]
band_idx = list(THERMAL_BANDS.keys()).index(thermal_status)
if current_band.min_temp is not None and max_comp_temp < current_band.min_temp:
thermal_status = list(THERMAL_BANDS.keys())[band_idx - 1]
elif current_band.max_temp is not None and max_comp_temp > current_band.max_temp:
thermal_status = list(THERMAL_BANDS.keys())[band_idx + 1]
if not dp_temp_monitor and thermal_status in [ThermalStatus.red, ThermalStatus.danger]:
thermal_status = ThermalStatus.yellow
# **** starting logic ****
# Check for last update time and display alerts if needed
# now = datetime.datetime.utcnow()
#
# # show invalid date/time alert
# startup_conditions["time_valid"] = (now.year > 2020) or (now.year == 2020 and now.month >= 10)
# set_offroad_alert_if_changed("Offroad_InvalidTime", (not startup_conditions["time_valid"]))
#
# # Show update prompt
# try:
# last_update = datetime.datetime.fromisoformat(params.get("LastUpdateTime", encoding='utf8'))
# except (TypeError, ValueError):
# last_update = now
# dt = now - last_update
#
# update_failed_count = params.get("UpdateFailedCount")
# update_failed_count = 0 if update_failed_count is None else int(update_failed_count)
# last_update_exception = params.get("LastUpdateException", encoding='utf8')
#
# if update_failed_count > 15 and last_update_exception is not None:
# if tested_branch:
# extra_text = "Ensure the software is correctly installed"
# else:
# extra_text = last_update_exception
#
# set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", False)
# set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt", False)
# set_offroad_alert_if_changed("Offroad_UpdateFailed", True, extra_text=extra_text)
# elif dt.days > DAYS_NO_CONNECTIVITY_MAX and update_failed_count > 1:
# set_offroad_alert_if_changed("Offroad_UpdateFailed", False)
# set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt", False)
# set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", True)
# elif dt.days > DAYS_NO_CONNECTIVITY_PROMPT:
# remaining_time = str(max(DAYS_NO_CONNECTIVITY_MAX - dt.days, 0))
# set_offroad_alert_if_changed("Offroad_UpdateFailed", False)
# set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", False)
# set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt", True, extra_text=f"{remaining_time} days.")
# else:
# set_offroad_alert_if_changed("Offroad_UpdateFailed", False)
# set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", False)
# set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt", False)
startup_conditions["up_to_date"] = params.get("Offroad_ConnectivityNeeded") is None or params.get_bool("DisableUpdates")
startup_conditions["not_uninstalling"] = not params.get_bool("DoUninstall")
startup_conditions["accepted_terms"] = params.get("HasAcceptedTerms") == terms_version
panda_signature = params.get("PandaFirmware")
startup_conditions["fw_version_match"] = (panda_signature is None) or (panda_signature == FW_SIGNATURE) # don't show alert is no panda is connected (None)
set_offroad_alert_if_changed("Offroad_PandaFirmwareMismatch", (not startup_conditions["fw_version_match"]))
# with 2% left, we killall, otherwise the phone will take a long time to boot
startup_conditions["free_space"] = msg.deviceState.freeSpacePercent > 2
startup_conditions["completed_training"] = params.get("CompletedTrainingVersion") == training_version or \
params.get_bool("Passive")
startup_conditions["not_driver_view"] = not params.get_bool("IsDriverViewEnabled")
startup_conditions["not_taking_snapshot"] = not params.get_bool("IsTakingSnapshot")
# if any CPU gets above 107 or the battery gets above 63, kill all processes
# controls will warn with CPU above 95 or battery above 60
startup_conditions["device_temp_good"] = thermal_status < ThermalStatus.danger
set_offroad_alert_if_changed("Offroad_TemperatureTooHigh", (not startup_conditions["device_temp_good"]))
if TICI:
set_offroad_alert_if_changed("Offroad_NvmeMissing", (not Path("/data/media").is_mount()))
# Handle offroad/onroad transition
should_start = all(startup_conditions.values())
# dp - check usb_present to fix not going offroad on "EON/LEON + battery - Comma Power"
if dp_no_offroad_fix:
should_start = should_start and HARDWARE.get_usb_present()
if should_start != should_start_prev or (count == 0):
params.put_bool("IsOnroad", should_start)
params.put_bool("IsOffroad", not should_start)
HARDWARE.set_power_save(not should_start)
if should_start:
off_ts = None
if started_ts is None:
started_ts = sec_since_boot()
started_seen = True
else:
if startup_conditions["ignition"] and (startup_conditions != startup_conditions_prev):
cloudlog.event("Startup blocked", startup_conditions=startup_conditions)
started_ts = None
if off_ts is None:
off_ts = sec_since_boot()
# Offroad power monitoring
if not dp_no_batt:
power_monitor.calculate(peripheralState, startup_conditions["ignition"])
msg.deviceState.offroadPowerUsageUwh = power_monitor.get_power_used()
msg.deviceState.carBatteryCapacityUwh = max(0, power_monitor.get_car_battery_capacity())
# Check if we need to disable charging (handled by boardd)
msg.deviceState.chargingDisabled = power_monitor.should_disable_charging(startup_conditions["ignition"], in_car, off_ts, dp_auto_shutdown, dp_auto_shutdown_in)
# dp - for battery powered device
# when peripheralState is not changing (panda offline), and usb is not present (not charging)
if dp_no_offroad_fix and (peripheralStateLast == peripheralState) and not msg.deviceState.usbOnline:
if (sec_since_boot() - off_ts) > dp_auto_shutdown_in * 60:
time.sleep(10)
HARDWARE.shutdown()
peripheralStateLast = peripheralState
# Check if we need to shut down
if power_monitor.should_shutdown(peripheralState, startup_conditions["ignition"], in_car, off_ts, started_seen, LEON, dp_auto_shutdown, dp_auto_shutdown_in):
cloudlog.info(f"shutting device down, offroad since {off_ts}")
# TODO: add function for blocking cloudlog instead of sleep
time.sleep(10)
HARDWARE.shutdown()
# If UI has crashed, set the brightness to reasonable non-zero value
ui_running = "ui" in (p.name for p in sm["managerState"].processes if p.running)
if ui_running_prev and not ui_running:
HARDWARE.set_screen_brightness(20)
ui_running_prev = ui_running
msg.deviceState.chargingError = current_filter.x > 0. and msg.deviceState.batteryPercent < 90 # if current is positive, then battery is being discharged
msg.deviceState.started = started_ts is not None
msg.deviceState.startedMonoTime = int(1e9*(started_ts or 0))
last_ping = params.get("LastAthenaPingTime")
if last_ping is not None:
msg.deviceState.lastAthenaPingTime = int(last_ping)
msg.deviceState.thermalStatus = thermal_status
pm.send("deviceState", msg)
if EON and not is_uno:
set_offroad_alert_if_changed("Offroad_ChargeDisabled", (not usb_power))
should_start_prev = should_start
startup_conditions_prev = startup_conditions.copy()
# report to server once every 10 minutes
# if (count % int(600. / DT_TRML)) == 0:
# if EON and started_ts is None and msg.deviceState.memoryUsagePercent > 40:
# cloudlog.event("High offroad memory usage", mem=msg.deviceState.memoryUsagePercent)
#
# cloudlog.event("STATUS_PACKET",
# count=count,
# pandaStates=(strip_deprecated_keys(pandaStates.to_dict()) if pandaStates else None),
# peripheralState=strip_deprecated_keys(peripheralState.to_dict()),
# location=(strip_deprecated_keys(sm["gpsLocationExternal"].to_dict()) if sm.alive["gpsLocationExternal"] else None),
# deviceState=strip_deprecated_keys(msg.to_dict()))
count += 1
def thermald_thread():
pm = messaging.PubMaster(['deviceState'])
pandaState_timeout = int(1000 * 2.5 *
DT_TRML) # 2.5x the expected pandaState frequency
pandaState_sock = messaging.sub_sock('pandaState',
timeout=pandaState_timeout)
location_sock = messaging.sub_sock('gpsLocationExternal')
managerState_sock = messaging.sub_sock('managerState', conflate=True)
fan_speed = 0
count = 0
startup_conditions = {
"ignition": False,
}
startup_conditions_prev = startup_conditions.copy()
off_ts = None
started_ts = None
started_seen = False
thermal_status = ThermalStatus.green
usb_power = True
network_type = NetworkType.none
network_strength = NetworkStrength.unknown
network_info = None
modem_version = None
registered_count = 0
current_filter = FirstOrderFilter(0., CURRENT_TAU, DT_TRML)
temp_filter = FirstOrderFilter(0., TEMP_TAU, DT_TRML)
pandaState_prev = None
should_start_prev = False
handle_fan = None
is_uno = False
ui_running_prev = False
params = Params()
power_monitor = PowerMonitoring()
no_panda_cnt = 0
HARDWARE.initialize_hardware()
thermal_config = HARDWARE.get_thermal_config()
# TODO: use PI controller for UNO
controller = PIController(k_p=0,
k_i=2e-3,
neg_limit=-80,
pos_limit=0,
rate=(1 / DT_TRML))
if params.get_bool("IsOnroad"):
cloudlog.event("onroad flag not cleared")
# CPR3 logging
if EON:
base_path = "/sys/kernel/debug/cpr3-regulator/"
cpr_files = [p for p in Path(base_path).glob("**/*") if p.is_file()]
cpr_files = ["/sys/kernel/debug/regulator/pm8994_s11/voltage"
] + cpr_files
cpr_data = {}
for cf in cpr_files:
with open(cf, "r") as f:
try:
cpr_data[str(cf)] = f.read().strip()
except Exception:
pass
cloudlog.event("CPR", data=cpr_data)
while 1:
pandaState = messaging.recv_sock(pandaState_sock, wait=True)
msg = read_thermal(thermal_config)
if pandaState is not None:
usb_power = pandaState.pandaState.usbPowerMode != log.PandaState.UsbPowerMode.client
# If we lose connection to the panda, wait 5 seconds before going offroad
if pandaState.pandaState.pandaType == log.PandaState.PandaType.unknown:
no_panda_cnt += 1
if no_panda_cnt > DISCONNECT_TIMEOUT / DT_TRML:
if startup_conditions["ignition"]:
cloudlog.error("Lost panda connection while onroad")
startup_conditions["ignition"] = False
else:
no_panda_cnt = 0
startup_conditions[
"ignition"] = pandaState.pandaState.ignitionLine or pandaState.pandaState.ignitionCan
startup_conditions[
"hardware_supported"] = pandaState.pandaState.pandaType not in [
log.PandaState.PandaType.whitePanda,
log.PandaState.PandaType.greyPanda
]
set_offroad_alert_if_changed(
"Offroad_HardwareUnsupported",
not startup_conditions["hardware_supported"])
# Setup fan handler on first connect to panda
if handle_fan is None and pandaState.pandaState.pandaType != log.PandaState.PandaType.unknown:
is_uno = pandaState.pandaState.pandaType == log.PandaState.PandaType.uno
if TICI:
cloudlog.info("Setting up TICI fan handler")
handle_fan = handle_fan_tici
elif is_uno or PC:
cloudlog.info("Setting up UNO fan handler")
handle_fan = handle_fan_uno
else:
cloudlog.info("Setting up EON fan handler")
setup_eon_fan()
handle_fan = handle_fan_eon
# Handle disconnect
if pandaState_prev is not None:
if pandaState.pandaState.pandaType == log.PandaState.PandaType.unknown and \
pandaState_prev.pandaState.pandaType != log.PandaState.PandaType.unknown:
params.clear_all(ParamKeyType.CLEAR_ON_PANDA_DISCONNECT)
pandaState_prev = pandaState
# get_network_type is an expensive call. update every 10s
if (count % int(10. / DT_TRML)) == 0:
try:
network_type = HARDWARE.get_network_type()
network_strength = HARDWARE.get_network_strength(network_type)
network_info = HARDWARE.get_network_info() # pylint: disable=assignment-from-none
# Log modem version once
if modem_version is None:
modem_version = HARDWARE.get_modem_version() # pylint: disable=assignment-from-none
if modem_version is not None:
cloudlog.warning(f"Modem version: {modem_version}")
if TICI and (network_info.get('state', None) == "REGISTERED"):
registered_count += 1
else:
registered_count = 0
if registered_count > 10:
cloudlog.warning(
f"Modem stuck in registered state {network_info}. nmcli conn up lte"
)
os.system("nmcli conn up lte")
registered_count = 0
except Exception:
cloudlog.exception("Error getting network status")
msg.deviceState.freeSpacePercent = get_available_percent(default=100.0)
msg.deviceState.memoryUsagePercent = int(
round(psutil.virtual_memory().percent))
msg.deviceState.cpuUsagePercent = [
int(round(n)) for n in psutil.cpu_percent(percpu=True)
]
msg.deviceState.gpuUsagePercent = int(
round(HARDWARE.get_gpu_usage_percent()))
msg.deviceState.networkType = network_type
msg.deviceState.networkStrength = network_strength
if network_info is not None:
msg.deviceState.networkInfo = network_info
msg.deviceState.batteryPercent = HARDWARE.get_battery_capacity()
msg.deviceState.batteryCurrent = HARDWARE.get_battery_current()
msg.deviceState.usbOnline = HARDWARE.get_usb_present()
current_filter.update(msg.deviceState.batteryCurrent / 1e6)
max_comp_temp = temp_filter.update(
max(max(msg.deviceState.cpuTempC), msg.deviceState.memoryTempC,
max(msg.deviceState.gpuTempC)))
if handle_fan is not None:
fan_speed = handle_fan(controller, max_comp_temp, fan_speed,
startup_conditions["ignition"])
msg.deviceState.fanSpeedPercentDesired = fan_speed
is_offroad_for_5_min = (started_ts is None) and (
(not started_seen) or (off_ts is None) or
(sec_since_boot() - off_ts > 60 * 5))
if is_offroad_for_5_min and max_comp_temp > OFFROAD_DANGER_TEMP:
# If device is offroad we want to cool down before going onroad
# since going onroad increases load and can make temps go over 107
thermal_status = ThermalStatus.danger
else:
current_band = THERMAL_BANDS[thermal_status]
band_idx = list(THERMAL_BANDS.keys()).index(thermal_status)
if current_band.min_temp is not None and max_comp_temp < current_band.min_temp:
thermal_status = list(THERMAL_BANDS.keys())[band_idx - 1]
elif current_band.max_temp is not None and max_comp_temp > current_band.max_temp:
thermal_status = list(THERMAL_BANDS.keys())[band_idx + 1]
# **** starting logic ****
# Check for last update time and display alerts if needed
now = datetime.datetime.utcnow()
# show invalid date/time alert
startup_conditions["time_valid"] = (now.year > 2020) or (
now.year == 2020 and now.month >= 10)
set_offroad_alert_if_changed("Offroad_InvalidTime",
(not startup_conditions["time_valid"]))
# Show update prompt
try:
last_update = datetime.datetime.fromisoformat(
params.get("LastUpdateTime", encoding='utf8'))
except (TypeError, ValueError):
last_update = now
dt = now - last_update
update_failed_count = params.get("UpdateFailedCount")
update_failed_count = 0 if update_failed_count is None else int(
update_failed_count)
last_update_exception = params.get("LastUpdateException",
encoding='utf8')
if update_failed_count > 15 and last_update_exception is not None:
if tested_branch:
extra_text = "Ensure the software is correctly installed"
else:
extra_text = last_update_exception
set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt",
False)
set_offroad_alert_if_changed("Offroad_UpdateFailed",
True,
extra_text=extra_text)
elif dt.days > DAYS_NO_CONNECTIVITY_MAX and update_failed_count > 1:
set_offroad_alert_if_changed("Offroad_UpdateFailed", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt",
False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", True)
elif dt.days > DAYS_NO_CONNECTIVITY_PROMPT:
remaining_time = str(max(DAYS_NO_CONNECTIVITY_MAX - dt.days, 0))
set_offroad_alert_if_changed("Offroad_UpdateFailed", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt",
True,
extra_text=f"{remaining_time} days.")
else:
set_offroad_alert_if_changed("Offroad_UpdateFailed", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", False)
set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt",
False)
startup_conditions["up_to_date"] = params.get(
"Offroad_ConnectivityNeeded") is None or params.get_bool(
"DisableUpdates")
startup_conditions["not_uninstalling"] = not params.get_bool(
"DoUninstall")
startup_conditions["accepted_terms"] = params.get(
"HasAcceptedTerms") == terms_version
panda_signature = params.get("PandaFirmware")
startup_conditions["fw_version_match"] = (panda_signature is None) or (
panda_signature == FW_SIGNATURE
) # don't show alert is no panda is connected (None)
set_offroad_alert_if_changed(
"Offroad_PandaFirmwareMismatch",
(not startup_conditions["fw_version_match"]))
# with 2% left, we killall, otherwise the phone will take a long time to boot
startup_conditions["free_space"] = msg.deviceState.freeSpacePercent > 2
startup_conditions["completed_training"] = params.get("CompletedTrainingVersion") == training_version or \
params.get_bool("Passive")
startup_conditions["not_driver_view"] = not params.get_bool(
"IsDriverViewEnabled")
startup_conditions["not_taking_snapshot"] = not params.get_bool(
"IsTakingSnapshot")
# if any CPU gets above 107 or the battery gets above 63, kill all processes
# controls will warn with CPU above 95 or battery above 60
startup_conditions[
"device_temp_good"] = thermal_status < ThermalStatus.danger
set_offroad_alert_if_changed(
"Offroad_TemperatureTooHigh",
(not startup_conditions["device_temp_good"]))
if TICI:
set_offroad_alert_if_changed("Offroad_NvmeMissing",
(not Path("/data/media").is_mount()))
# Handle offroad/onroad transition
should_start = all(startup_conditions.values())
if should_start != should_start_prev or (count == 0):
params.put_bool("IsOnroad", should_start)
params.put_bool("IsOffroad", not should_start)
HARDWARE.set_power_save(not should_start)
if should_start:
off_ts = None
if started_ts is None:
started_ts = sec_since_boot()
started_seen = True
else:
if startup_conditions["ignition"] and (startup_conditions !=
startup_conditions_prev):
cloudlog.event("Startup blocked",
startup_conditions=startup_conditions)
started_ts = None
if off_ts is None:
off_ts = sec_since_boot()
# Offroad power monitoring
power_monitor.calculate(pandaState)
msg.deviceState.offroadPowerUsageUwh = power_monitor.get_power_used()
msg.deviceState.carBatteryCapacityUwh = max(
0, power_monitor.get_car_battery_capacity())
# Check if we need to disable charging (handled by boardd)
msg.deviceState.chargingDisabled = power_monitor.should_disable_charging(
pandaState, off_ts)
# Check if we need to shut down
if power_monitor.should_shutdown(pandaState, off_ts, started_seen):
cloudlog.info(f"shutting device down, offroad since {off_ts}")
# TODO: add function for blocking cloudlog instead of sleep
time.sleep(10)
HARDWARE.shutdown()
# If UI has crashed, set the brightness to reasonable non-zero value
manager_state = messaging.recv_one_or_none(managerState_sock)
if manager_state is not None:
ui_running = "ui" in (p.name
for p in manager_state.managerState.processes
if p.running)
if ui_running_prev and not ui_running:
HARDWARE.set_screen_brightness(20)
ui_running_prev = ui_running
msg.deviceState.chargingError = current_filter.x > 0. and msg.deviceState.batteryPercent < 90 # if current is positive, then battery is being discharged
msg.deviceState.started = started_ts is not None
msg.deviceState.startedMonoTime = int(1e9 * (started_ts or 0))
last_ping = params.get("LastAthenaPingTime")
if last_ping is not None:
msg.deviceState.lastAthenaPingTime = int(last_ping)
msg.deviceState.thermalStatus = thermal_status
pm.send("deviceState", msg)
if EON and not is_uno:
set_offroad_alert_if_changed("Offroad_ChargeDisabled",
(not usb_power))
should_start_prev = should_start
startup_conditions_prev = startup_conditions.copy()
# report to server once every 10 minutes
if (count % int(600. / DT_TRML)) == 0:
if EON and started_ts is None and msg.deviceState.memoryUsagePercent > 40:
cloudlog.event("High offroad memory usage",
mem=msg.deviceState.memoryUsagePercent)
location = messaging.recv_sock(location_sock)
cloudlog.event("STATUS_PACKET",
count=count,
pandaState=(strip_deprecated_keys(
pandaState.to_dict()) if pandaState else None),
location=(strip_deprecated_keys(
location.gpsLocationExternal.to_dict())
if location else None),
deviceState=strip_deprecated_keys(msg.to_dict()))
count += 1
def thermald_thread():
pm = messaging.PubMaster(['deviceState'])
pandaState_timeout = int(1000 * 2.5 *
DT_TRML) # 2.5x the expected pandaState frequency
pandaState_sock = messaging.sub_sock('pandaState',
timeout=pandaState_timeout)
location_sock = messaging.sub_sock('gpsLocationExternal')
managerState_sock = messaging.sub_sock('managerState', conflate=True)
fan_speed = 0
count = 0
startup_conditions = {
"ignition": False,
}
startup_conditions_prev = startup_conditions.copy()
off_ts = None
started_ts = None
started_seen = False
thermal_status = ThermalStatus.green
usb_power = True
network_type = NetworkType.none
network_strength = NetworkStrength.unknown
network_info = None
modem_version = None
registered_count = 0
current_filter = FirstOrderFilter(0., CURRENT_TAU, DT_TRML)
cpu_temp_filter = FirstOrderFilter(0., CPU_TEMP_TAU, DT_TRML)
pandaState_prev = None
should_start_prev = False
handle_fan = None
is_uno = False
ui_running_prev = False
power_monitor = PowerMonitoring()
no_panda_cnt = 0
HARDWARE.initialize_hardware()
thermal_config = HARDWARE.get_thermal_config()
if params.get_bool("IsOnroad"):
cloudlog.event("onroad flag not cleared")
# dp
dp_no_batt = params.get_bool("dp_no_batt")
dp_temp_monitor = True
dp_last_modified_temp_monitor = None
dp_auto_shutdown = False
dp_last_modified_auto_shutdown = None
dp_auto_shutdown_last = False
dp_auto_shutdown_in = 90
dp_last_modified_auto_shutdown_in = None
dp_auto_shutdown_in_last = 90
dp_fan_mode = 0
dp_fan_mode_last = None
modified = None
last_modified = None
last_modified_check = None
#dp
prebuilt_file = '/data/openpilot/prebuilt'
dp_prebuilt = params.get_bool("dp_prebuilt")
if not os.path.isfile(prebuilt_file) and dp_prebuilt:
os.system("touch /data/openpilot/prebuilt")
elif os.path.isfile(prebuilt_file) and not dp_prebuilt:
os.system("rm -fr /data/openpilot/prebuilt")
# CPR3 logging
if EON:
base_path = "/sys/kernel/debug/cpr3-regulator/"
cpr_files = [p for p in Path(base_path).glob("**/*") if p.is_file()]
cpr_files = ["/sys/kernel/debug/regulator/pm8994_s11/voltage"
] + cpr_files
cpr_data = {}
for cf in cpr_files:
with open(cf, "r") as f:
try:
cpr_data[str(cf)] = f.read().strip()
except Exception:
pass
cloudlog.event("CPR", data=cpr_data)
# dp - light up = not started
if JETSON:
HARDWARE.led(True)
while 1:
# dp - load temp monitor conf
last_modified_check, modified = get_last_modified(
LAST_MODIFIED_THERMALD, last_modified_check, modified)
if last_modified != modified:
dp_temp_monitor, dp_last_modified_temp_monitor = param_get_if_updated(
"dp_temp_monitor", "bool", dp_temp_monitor,
dp_last_modified_temp_monitor)
dp_auto_shutdown, dp_last_modified_auto_shutdown = param_get_if_updated(
"dp_auto_shutdown", "bool", dp_auto_shutdown,
dp_last_modified_auto_shutdown)
dp_auto_shutdown_in, dp_last_modified_auto_shutdown_in = param_get_if_updated(
"dp_auto_shutdown_in", "int", dp_auto_shutdown_in,
dp_last_modified_auto_shutdown_in)
dp_fan_mode, dp_fan_mode_last = param_get_if_updated(
"dp_fan_mode", "int", dp_fan_mode, dp_fan_mode_last)
last_modified = modified
pandaState = messaging.recv_sock(pandaState_sock, wait=True)
msg = read_thermal(thermal_config)
if pandaState is not None:
usb_power = pandaState.pandaState.usbPowerMode != log.PandaState.UsbPowerMode.client
# If we lose connection to the panda, wait 5 seconds before going offroad
if pandaState.pandaState.pandaType == log.PandaState.PandaType.unknown:
no_panda_cnt += 1
if no_panda_cnt > DISCONNECT_TIMEOUT / DT_TRML:
if startup_conditions["ignition"]:
cloudlog.error("Lost panda connection while onroad")
startup_conditions["ignition"] = False
else:
no_panda_cnt = 0
startup_conditions[
"ignition"] = pandaState.pandaState.ignitionLine or pandaState.pandaState.ignitionCan
startup_conditions[
"hardware_supported"] = pandaState.pandaState.pandaType not in [
log.PandaState.PandaType.whitePanda,
log.PandaState.PandaType.greyPanda
]
set_offroad_alert_if_changed(
"Offroad_HardwareUnsupported",
not startup_conditions["hardware_supported"])
# Setup fan handler on first connect to panda
if not JETSON and handle_fan is None and pandaState.pandaState.pandaType != log.PandaState.PandaType.unknown:
is_uno = pandaState.pandaState.pandaType == log.PandaState.PandaType.uno
if (not EON) or is_uno:
cloudlog.info("Setting up UNO fan handler")
handle_fan = handle_fan_uno
else:
cloudlog.info("Setting up EON fan handler")
setup_eon_fan()
handle_fan = handle_fan_eon
# Handle disconnect
if pandaState_prev is not None:
if pandaState.pandaState.pandaType == log.PandaState.PandaType.unknown and \
pandaState_prev.pandaState.pandaType != log.PandaState.PandaType.unknown:
params.clear_all(ParamKeyType.CLEAR_ON_PANDA_DISCONNECT)
pandaState_prev = pandaState
# get_network_type is an expensive call. update every 10s
if (count % int(10. / DT_TRML)) == 0:
try:
network_type = HARDWARE.get_network_type()
network_strength = HARDWARE.get_network_strength(network_type)
network_info = HARDWARE.get_network_info() # pylint: disable=assignment-from-none
# Log modem version once
if modem_version is None:
modem_version = HARDWARE.get_modem_version() # pylint: disable=assignment-from-none
if modem_version is not None:
cloudlog.warning(f"Modem version: {modem_version}")
if TICI and (network_info.get('state', None) == "REGISTERED"):
registered_count += 1
else:
registered_count = 0
if registered_count > 10:
cloudlog.warning(
f"Modem stuck in registered state {network_info}. nmcli conn up lte"
)
os.system("nmcli conn up lte")
registered_count = 0
except Exception:
cloudlog.exception("Error getting network status")
msg.deviceState.freeSpacePercent = get_available_percent(default=100.0)
msg.deviceState.memoryUsagePercent = int(
round(psutil.virtual_memory().percent))
msg.deviceState.cpuUsagePercent = int(round(psutil.cpu_percent()))
msg.deviceState.gpuUsagePercent = int(
round(HARDWARE.get_gpu_usage_percent()))
msg.deviceState.networkType = network_type
msg.deviceState.networkStrength = network_strength
if network_info is not None:
msg.deviceState.networkInfo = network_info
msg.deviceState.batteryPercent = HARDWARE.get_battery_capacity()
msg.deviceState.batteryStatus = HARDWARE.get_battery_status()
msg.deviceState.batteryCurrent = HARDWARE.get_battery_current()
msg.deviceState.batteryVoltage = HARDWARE.get_battery_voltage()
msg.deviceState.usbOnline = HARDWARE.get_usb_present()
# Fake battery levels on uno for frame
if (not EON) or is_uno or dp_no_batt:
msg.deviceState.batteryPercent = 100
msg.deviceState.batteryStatus = "Charging"
msg.deviceState.batteryTempC = 0
current_filter.update(msg.deviceState.batteryCurrent / 1e6)
# TODO: add car battery voltage check
max_cpu_temp = cpu_temp_filter.update(max(msg.deviceState.cpuTempC))
max_comp_temp = max(max_cpu_temp, msg.deviceState.memoryTempC,
max(msg.deviceState.gpuTempC))
bat_temp = msg.deviceState.batteryTempC
if handle_fan is not None:
fan_speed = handle_fan(dp_fan_mode, max_cpu_temp, bat_temp,
fan_speed, startup_conditions["ignition"])
msg.deviceState.fanSpeedPercentDesired = fan_speed
# If device is offroad we want to cool down before going onroad
# since going onroad increases load and can make temps go over 107
# We only do this if there is a relay that prevents the car from faulting
is_offroad_for_5_min = (started_ts is None) and (
(not started_seen) or (off_ts is None) or
(sec_since_boot() - off_ts > 60 * 5))
if max_cpu_temp > 107. or bat_temp >= 63. or (is_offroad_for_5_min
and max_cpu_temp > 70.0):
# onroad not allowed
thermal_status = ThermalStatus.danger
elif max_comp_temp > 96.0 or bat_temp > 60.:
# hysteresis between onroad not allowed and engage not allowed
thermal_status = clip(thermal_status, ThermalStatus.red,
ThermalStatus.danger)
elif max_cpu_temp > 94.0:
# hysteresis between engage not allowed and uploader not allowed
thermal_status = clip(thermal_status, ThermalStatus.yellow,
ThermalStatus.red)
elif max_cpu_temp > 80.0:
# uploader not allowed
thermal_status = ThermalStatus.yellow
elif max_cpu_temp > 75.0:
# hysteresis between uploader not allowed and all good
thermal_status = clip(thermal_status, ThermalStatus.green,
ThermalStatus.yellow)
else:
thermal_status = ThermalStatus.green # default to good condition
if not dp_temp_monitor and thermal_status in [
ThermalStatus.red, ThermalStatus.danger
]:
thermal_status = ThermalStatus.yellow
# **** starting logic ****
# Check for last update time and display alerts if needed
# now = datetime.datetime.utcnow()
#
# # show invalid date/time alert
# startup_conditions["time_valid"] = (now.year > 2020) or (now.year == 2020 and now.month >= 10)
# set_offroad_alert_if_changed("Offroad_InvalidTime", (not startup_conditions["time_valid"]))
#
# # Show update prompt
# try:
# last_update = datetime.datetime.fromisoformat(params.get("LastUpdateTime", encoding='utf8'))
# except (TypeError, ValueError):
# last_update = now
# dt = now - last_update
#
# update_failed_count = params.get("UpdateFailedCount")
# update_failed_count = 0 if update_failed_count is None else int(update_failed_count)
# last_update_exception = params.get("LastUpdateException", encoding='utf8')
#
# if update_failed_count > 15 and last_update_exception is not None:
# if tested_branch:
# extra_text = "Ensure the software is correctly installed"
# else:
# extra_text = last_update_exception
#
# set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", False)
# set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt", False)
# set_offroad_alert_if_changed("Offroad_UpdateFailed", True, extra_text=extra_text)
# elif dt.days > DAYS_NO_CONNECTIVITY_MAX and update_failed_count > 1:
# set_offroad_alert_if_changed("Offroad_UpdateFailed", False)
# set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt", False)
# set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", True)
# elif dt.days > DAYS_NO_CONNECTIVITY_PROMPT:
# remaining_time = str(max(DAYS_NO_CONNECTIVITY_MAX - dt.days, 0))
# set_offroad_alert_if_changed("Offroad_UpdateFailed", False)
# set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", False)
# set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt", True, extra_text=f"{remaining_time} days.")
# else:
# set_offroad_alert_if_changed("Offroad_UpdateFailed", False)
# set_offroad_alert_if_changed("Offroad_ConnectivityNeeded", False)
# set_offroad_alert_if_changed("Offroad_ConnectivityNeededPrompt", False)
startup_conditions["up_to_date"] = params.get(
"Offroad_ConnectivityNeeded") is None or params.get_bool(
"DisableUpdates")
startup_conditions["not_uninstalling"] = not params.get_bool(
"DoUninstall")
startup_conditions["accepted_terms"] = params.get(
"HasAcceptedTerms") == terms_version
panda_signature = params.get("PandaFirmware")
startup_conditions["fw_version_match"] = (panda_signature is None) or (
panda_signature == FW_SIGNATURE
) # don't show alert is no panda is connected (None)
set_offroad_alert_if_changed(
"Offroad_PandaFirmwareMismatch",
(not startup_conditions["fw_version_match"]))
# with 2% left, we killall, otherwise the phone will take a long time to boot
startup_conditions["free_space"] = msg.deviceState.freeSpacePercent > 2
startup_conditions["completed_training"] = params.get("CompletedTrainingVersion") == training_version or \
params.get_bool("Passive")
startup_conditions["not_driver_view"] = not params.get_bool(
"IsDriverViewEnabled")
startup_conditions["not_taking_snapshot"] = not params.get_bool(
"IsTakingSnapshot")
# if any CPU gets above 107 or the battery gets above 63, kill all processes
# controls will warn with CPU above 95 or battery above 60
startup_conditions[
"device_temp_good"] = thermal_status < ThermalStatus.danger
set_offroad_alert_if_changed(
"Offroad_TemperatureTooHigh",
(not startup_conditions["device_temp_good"]))
if TICI:
set_offroad_alert_if_changed("Offroad_NvmeMissing",
(not Path("/data/media").is_mount()))
# Handle offroad/onroad transition
should_start = all(startup_conditions.values())
if should_start != should_start_prev or (count == 0):
params.put_bool("IsOnroad", should_start)
params.put_bool("IsOffroad", not should_start)
HARDWARE.set_power_save(not should_start)
if should_start:
off_ts = None
if started_ts is None:
started_ts = sec_since_boot()
started_seen = True
else:
if startup_conditions["ignition"] and (startup_conditions !=
startup_conditions_prev):
cloudlog.event("Startup blocked",
startup_conditions=startup_conditions)
started_ts = None
if off_ts is None:
off_ts = sec_since_boot()
# dp - show led when off and vice versa
if should_start != should_start_prev:
HARDWARE.led(False if should_start else True)
# Offroad power monitoring
if not dp_no_batt:
power_monitor.calculate(pandaState)
msg.deviceState.offroadPowerUsageUwh = power_monitor.get_power_used(
)
msg.deviceState.carBatteryCapacityUwh = max(
0, power_monitor.get_car_battery_capacity())
# Check if we need to disable charging (handled by boardd)
msg.deviceState.chargingDisabled = power_monitor.should_disable_charging(
pandaState, off_ts)
# Check if we need to shut down
if power_monitor.should_shutdown(pandaState, off_ts, started_seen,
LEON):
cloudlog.info(f"shutting device down, offroad since {off_ts}")
# TODO: add function for blocking cloudlog instead of sleep
time.sleep(10)
HARDWARE.shutdown()
# dp - auto shutdown
# reset off_ts if we change auto shutdown related params
if off_ts is not None:
if dp_auto_shutdown:
shutdown_sec = dp_auto_shutdown_in * 60
sec_now = sec_since_boot() - off_ts
if (shutdown_sec - 5) < sec_now:
msg.deviceState.chargingDisabled = True
if shutdown_sec < sec_now:
time.sleep(10)
HARDWARE.shutdown()
if dp_auto_shutdown_in_last != dp_auto_shutdown_in or dp_auto_shutdown_last != dp_auto_shutdown:
off_ts = sec_since_boot()
dp_auto_shutdown_last = dp_auto_shutdown
dp_auto_shutdown_in_last = dp_auto_shutdown_in
# If UI has crashed, set the brightness to reasonable non-zero value
manager_state = messaging.recv_one_or_none(managerState_sock)
if manager_state is not None:
ui_running = "ui" in (p.name
for p in manager_state.managerState.processes
if p.running)
if ui_running_prev and not ui_running:
HARDWARE.set_screen_brightness(20)
ui_running_prev = ui_running
msg.deviceState.chargingError = current_filter.x > 0. and msg.deviceState.batteryPercent < 90 # if current is positive, then battery is being discharged
msg.deviceState.started = started_ts is not None
msg.deviceState.startedMonoTime = int(1e9 * (started_ts or 0))
last_ping = params.get("LastAthenaPingTime")
if last_ping is not None:
msg.deviceState.lastAthenaPingTime = int(last_ping)
msg.deviceState.thermalStatus = thermal_status
pm.send("deviceState", msg)
if EON and not is_uno:
set_offroad_alert_if_changed("Offroad_ChargeDisabled",
(not usb_power))
should_start_prev = should_start
startup_conditions_prev = startup_conditions.copy()
# report to server once every 10 minutes
# if (count % int(600. / DT_TRML)) == 0:
# if EON and started_ts is None and msg.deviceState.memoryUsagePercent > 40:
# cloudlog.event("High offroad memory usage", mem=msg.deviceState.memoryUsagePercent)
#
# location = messaging.recv_sock(location_sock)
# cloudlog.event("STATUS_PACKET",
# count=count,
# pandaState=(strip_deprecated_keys(pandaState.to_dict()) if pandaState else None),
# location=(strip_deprecated_keys(location.gpsLocationExternal.to_dict()) if location else None),
# deviceState=strip_deprecated_keys(msg.to_dict()))
count += 1
