def main():
dump_to_file('=======================================\n')
list_ports()
filepath_list = read_all('kanzhitongxue/neg')
with serial.Serial('/dev/ttyUSB0', baudrate=115200, timeout=5) as ser:
res = test_feature_all(filepath_list, ser, cb=dump_feature_to_file)
np.save('output.npy', res)
def init_serial():
global s1, s2, chirp
list_ports()
port = input("enter port:")
s1 = dev(port)
port = input("enter port:")
s2 = dev(port)
freq_start = 20000
freq_stop = 20000
pulse_width = 5e-3
update_params_on_device(freq_start, freq_stop, pulse_width)
def __init__(self, port=DEFAULT_PORT, baud=DEFAULT_BAUD, use_ftdi=False, print_unhandled=False):
self.print_unhandled = print_unhandled
self.unhandled_bytes = 0
self.callbacks = {}
if use_ftdi:
import pylibftdi
self.ser = pylibftdi.Device()
self.ser.baudrate = baud
else:
import serial
try:
self.ser = serial.Serial(port, baud, timeout=1)
print "Opened serial device '%s'" % port
except serial.SerialException:
print
print "Serial device '%s' not found" % port
print
print "The following serial devices were detected:"
print
for p in list_ports():
p_name, p_desc, _ = p
if p_desc == p_name:
print "\t%s" % p_name
else:
print "\t%s (%s)" % (p_name, p_desc)
sys.exit(1)
# Delay then flush the buffer to make sure the receive buffer starts empty.
time.sleep(0.5)
self.ser.flush()
self.lt = ListenerThread(self, print_unhandled)
self.lt.start()
def main():
print("""
1. Enter Arduino COM_PORT
2. List COM_PORT(s) (under devlopment)
3. View log file
4. Quit
""")
while True:
if keyboard.is_pressed('1'):
print('\n')
logging.info("User started function: start_comm")
com_port = input("Enter com_port: " + "COM6")
start_comm(com_port)
elif keyboard.is_pressed('2'):
print('\n')
logging.info("User started function: list_port")
print(list_ports())
elif keyboard.is_pressed('3'):
print('\n')
logging.info("User started function: view_log")
view_log()
elif keyboard.is_pressed('4'):
print('\n')
logging.info("User started function: quit()")
quit()
def execute(command=None):
try:
ser = list_ports()
except:
print('Initialise - Failed')
ser.close()
return
try:
# res = command_check(command)
# print('\t'+'Available Commands:')
# print('\t'*2+'SHOW DEGREE : RETURN VALUES OF EACH SERVO')
# print('\t'*2+'HELP : HELP LIST')
# print('\t'*2+'QUIT : QUIT SCRIPT' )
# print('\t'*2+'SET %SETVO %DEGREE : SET DEGREE OF A SERVO DIRECTLY; e.g. SET F 45 ')
# print('\t'*2+'ADD %SETVO %DEGREE : ADD DEGREE OF A SERVO; e.g. ADD F 10 ')
# print('\t'*2+'MINUS %SETVO %DEGREE : MINUS DEGREE OF A SERVO; e.g. MINUS F 10 ')
ser.write(command.encode())
s = ser.readlines(40)
# if type(s) == str:
# print('\t'+s.decode('utf-8'))
# else:
# for i in range(len(s)):
# print('\t'+s[i].decode('utf-8'))
# print()
except:
print('ERROR!')
ser.close()
command = None
ser.close()
def find_port(filters=DEFAULT_PORT_FILTERS, excluded_ports=[], ports=None):
"""Find a port by the provided filter predicates in order of preference."""
if ports is None:
ports = list_ports()
for filter in filters:
for (device, properties) in ports.items():
if filter(properties) and (device not in excluded_ports):
return (device, properties)
def main():
parser = argparse.ArgumentParser(
description='Read the given Arduino serial port')
parser.add_argument('--log_level',
action='store',
default='DEBUG',
help='Logging level')
parser.add_argument('--port',
action='store',
default='/dev/ttyUSB0',
help='port')
parser.add_argument('--baud',
action='store',
default='115200',
help='baud')
parser.add_argument('--list',
action='store_true',
help='List the available ports (default)')
parser.add_argument('--test',
action='store_true',
help='Verify an AUnit test')
parser.add_argument('--monitor',
action='store_true',
help='Monitor the serial port')
parser.add_argument('--eof',
action='store',
default='',
help='End of File string')
parser.add_argument('--timeout',
action='store',
default=TIMEOUT_ON_IDLE,
help='End of File string')
args = parser.parse_args()
# Configure logging.
logging.basicConfig(level=args.log_level,
format=LOG_FORMAT,
datefmt=DATE_FORMAT)
if args.monitor:
monitor(args.port, args.baud, args.eof, args.timeout)
elif args.test:
validate_test(args.port, args.baud, args.timeout)
else:
list_ports()
def atualizarUSB(self, button):
self.comboBox.destroy()
self.comboBox = Gtk.ComboBox.new_with_model(list_ports())
renderer = Gtk.CellRendererText()
self.comboBox.set_active(0)
self.comboBox.pack_start(renderer, True)
self.comboBox.add_attribute(renderer, 'text', 1)
self.sensor.attach(self.comboBox, 0, 2, 2, 1)
win.show_all()
def all_set_init(): # 获得初始数据给Robot类
print('Initialising...')
try:
ser = list_ports()
# ser = initialize()
print('Initialised')
except:
print('Initialise - Failed')
ser.close()
return
command = "SHOW DEGREE"
# command = "SET A 45"
ser.write(command.encode())
s = ser.readlines(40)
nums = re.findall(r"\d+", s[1])
nums = map(int, nums) # 将list转化为int
return ser, nums
def execute(command=None):
print('Initialising...')
try:
#ser = initialize()
ser = list_ports()
print('Initialised')
except:
print('Initialise - Failed')
ser.close()
return
while True:
try:
if command == None:
command = raw_input('BRobot: ')
else:
pass
res = command_check(command)
if res == 'Command ERROR':
print('\t' + res)
print('Try type "HELP"')
command = None
continue
elif res == 'HELP':
print('\t'+'Available Commands:')
print('\t'*2+'SHOW DEGREE : RETURN VALUES OF EACH SERVO')
print('\t'*2+'HELP : HELP LIST')
print('\t'*2+'QUIT : QUIT SCRIPT' )
print('\t'*2+'SET %SETVO %DEGREE : SET DEGREE OF A SERVO DIRECTLY; e.g. SET F 45 ')
print('\t'*2+'ADD %SETVO %DEGREE : ADD DEGREE OF A SERVO; e.g. ADD F 10 ')
print('\t'*2+'MINUS %SETVO %DEGREE : MINUS DEGREE OF A SERVO; e.g. MINUS F 10 ')
elif res == 'QUIT':
break
else:
ser.write(command.encode())
s = ser.readlines(40)
if type(s) == str:
print('\t'+s.decode('utf-8'))
else:
for i in range(len(s)):
print('\t'+s[i].decode('utf-8'))
print()
except:
print('ERROR!')
ser.close()
command = None
ser.close()
def connect(self):
self.close()
ports = list_ports()
if len(ports) <= 0:
return False
try:
self.obj = serial.Serial(port=ports[0], baudrate=self.baud)
if not self.connected():
self.close()
return False
return True
except Exception as error:
print(error)
return False
def json_handle_portslist(*msg):
try:
ports = list_ports()
ports.append("dummy") # always add dummy for testing
json = {
'jsonrpc': '2.0',
'id': 6,
'method': "serial-ports-list",
'params': {
'time': time() * 1000,
'message': ports
}
}
except Exception as e:
# TODO: fix this to be a real error type so it gets sent to the clients properly
Logger.log("e", "could not get serial ports list: {}".format(repr(e)))
raise ValueError("could not get serial ports list: {}".format(
repr(e)))
return json
def __init__(self,
port=DEFAULT_PORT,
baud=DEFAULT_BAUD,
use_ftdi=False,
print_unhandled=False):
self.print_unhandled = print_unhandled
self.unhandled_bytes = 0
self.callbacks = {}
self.global_callbacks = []
if use_ftdi:
import pylibftdi
self.ser = pylibftdi.Device()
self.ser.baudrate = baud
else:
import serial
try:
self.ser = serial.Serial(port, baud, timeout=1)
except serial.SerialException:
print
print "Serial device '%s' not found" % port
print
print "The following serial devices were detected:"
print
for p in list_ports():
p_name, p_desc, _ = p
if p_desc == p_name:
print "\t%s" % p_name
else:
print "\t%s (%s)" % (p_name, p_desc)
sys.exit(1)
# Delay then flush the buffer to make sure the receive buffer starts empty.
time.sleep(0.5)
self.ser.flush()
self.lt = ListenerThread(self, print_unhandled)
self.lt.start()
def main():
# create argparse object - set automatic help to false
parser = argparse.ArgumentParser(add_help=False)
# add arguments to parse
parser.add_argument("-h", "--help", action="store_true")
parser.add_argument("-v", "--version", help="",action="store_true")
parser.add_argument("-p", "--port", help="")
parser.add_argument("-m", "--message", help="")
parser.add_argument("-t", "--timeout", help="", type=float)
parser.add_argument("-l", "--list", help="",action="store_true")
parser.add_argument("-q", "--quiet", help="",action="store_true")
# parse arguments
args = parser.parse_args()
# if --help / -h print help and exit
if args.help:
print_help()
sys.exit(0)
if args.list:
list_ports()
sys.exit(0)
# if --version / -v print version information and exit
if args.version:
print_version()
sys.exit(0)
else:
# if --message / -m ...
if args.message:
# set test message
msg = args.message
else:
msg = "D"
#if --timeout / -t ...
if args.timeout:
# set timeout
tout = args.timeout
else:
tout = 1
#if --port / -p ...
if args.port:
pserie = args.port
else:
pserie = '/dev/ttyUSB0'
# try to open port
# if not possible lists available ports
try:
ser = serial.Serial(pserie, timeout=tout)
except serial.serialutil.SerialException, mensaje:
print mensaje
print "Could not open port..."
list_ports()
raise SystemExit
def __init__(self):
Gtk.Window.__init__(self,
title="Seguidor de Linha - Robot Arena 2020.2")
self.set_border_width(10)
self.maing = Gtk.Grid()
self.maing.set_column_spacing(50)
self.maing.set_row_spacing(25)
self.add(self.maing)
# SENSOR ---------------------------------
self.sensor = Gtk.Grid()
self.sensor.set_column_spacing(10)
self.sensor.set_row_spacing(10)
self.maing.attach(self.sensor, 0, 1, 1, 1)
self.label = Gtk.Label()
self.label.set_markup("<big>Sensor</big>")
self.label.set_justify(Gtk.Justification.CENTER)
self.sensor.attach(self.label, 0, 0, 2, 1)
self.conlabel = Gtk.Label()
self.conlabel.set_markup(
'<span foreground="red"><big><b>Desconectado</b></big></span>')
self.conlabel.set_justify(Gtk.Justification.CENTER)
self.sensor.attach(self.conlabel, 0, 1, 2, 1)
self.comboBox = Gtk.ComboBox.new_with_model(list_ports())
renderer = Gtk.CellRendererText()
self.comboBox.set_active(0)
self.comboBox.pack_start(renderer, True)
self.comboBox.add_attribute(renderer, 'text', 1)
self.sensor.attach(self.comboBox, 0, 2, 2, 1)
self.button = Gtk.Button.new_with_mnemonic("Atualizar")
self.button.connect("clicked", self.atualizarUSB)
self.sensor.attach(self.button, 0, 3, 1, 1)
self.button = Gtk.Button.new_with_mnemonic("Conectar")
self.button.connect("clicked", self.conectarUSB)
self.sensor.attach(self.button, 1, 3, 1, 1)
# GRID ---------------------------------
self.grid = Gtk.Grid()
self.grid.set_column_spacing(2)
self.grid.set_row_spacing(10)
self.maing.attach(self.grid, 1, 1, 1, 1)
img = Gtk.Image.new_from_file('./logo.png')
self.grid.attach(img, 0, 1, 3, 1)
self.nome = Gtk.Label()
self.nome.set_markup(
'<big><b><span foreground="red">Selecione um competidor</span></b></big>'
)
self.nome.set_justify(Gtk.Justification.CENTER)
self.grid.attach(self.nome, 0, 2, 5, 1)
self.tempo1 = Gtk.Label()
self.tempo1.set_markup("1ª Tentativa\n<big><b>- s</b></big>")
self.tempo1.set_justify(Gtk.Justification.CENTER)
self.grid.attach(self.tempo1, 0, 4, 1, 1)
self.button = Gtk.Button.new_with_mnemonic("Autorizar")
self.button.connect("clicked", self.autorizar, 1)
self.grid.attach(self.button, 0, 5, 1, 1)
self.button = Gtk.Button.new_with_mnemonic("Resetar")
self.button.connect("clicked", self.resetar, 1)
self.grid.attach(self.button, 0, 6, 1, 1)
self.tempo2 = Gtk.Label()
self.tempo2.set_markup("2ª Tentativa\n<big><b>- s</b></big>")
self.tempo2.set_justify(Gtk.Justification.CENTER)
self.grid.attach(self.tempo2, 1, 4, 1, 1)
self.button = Gtk.Button.new_with_mnemonic("Autorizar")
self.button.connect("clicked", self.autorizar, 2)
self.grid.attach(self.button, 1, 5, 1, 1)
self.button = Gtk.Button.new_with_mnemonic("Resetar")
self.button.connect("clicked", self.resetar, 2)
self.grid.attach(self.button, 1, 6, 1, 1)
self.tempo3 = Gtk.Label()
self.tempo3.set_markup("3ª Tentativa\n<big><b>- s</b></big>")
self.tempo3.set_justify(Gtk.Justification.CENTER)
self.grid.attach(self.tempo3, 2, 4, 1, 1)
self.button = Gtk.Button.new_with_mnemonic("Autorizar")
self.button.connect("clicked", self.autorizar, 3)
self.grid.attach(self.button, 2, 5, 1, 1)
self.button = Gtk.Button.new_with_mnemonic("Resetar")
self.button.connect("clicked", self.resetar, 3)
self.grid.attach(self.button, 2, 6, 1, 1)
# SCORE ---------------------------------
self.score = Gtk.Grid()
self.score.set_column_spacing(2)
self.score.set_row_spacing(10)
self.maing.attach(self.score, 2, 1, 1, 1)
self.label = Gtk.Label()
self.label.set_markup("<big>Placar</big>")
self.label.set_justify(Gtk.Justification.CENTER)
self.score.attach(self.label, 0, 0, 3, 1)
self.entry = Gtk.Entry()
self.score.attach(self.entry, 0, 1, 2, 1)
self.button = Gtk.Button.new_with_mnemonic("Adicionar")
self.button.connect("clicked", self.addChallenger)
self.score.attach(self.button, 2, 1, 1, 1)
# SPONSORS ---------------------------------
self.sponsors = Gtk.Grid()
self.sponsors.set_column_spacing(2)
self.sponsors.set_row_spacing(2)
self.maing.attach(self.sponsors, 0, 2, 1, 3)
self.label = Gtk.Label()
self.label.set_markup("<big>Patrocinadores</big>")
self.label.set_justify(Gtk.Justification.CENTER)
self.sponsors.attach(self.label, 0, 1, 3, 1)
# Variáveis
self.tentativa = 0
self.start = 0
self.threadID = 0
self.Trig = False
self.selectedIndex = 0
self.t = math.inf
self.selected = []
action='store_true',
help='Parse the training SES site')
# Use headless browser
parser.add_argument(
'--headless',
action='store_true',
default=False,
help='Use headless browser instead of popping a Firefox window')
return parser.parse_args()
if __name__ == "__main__":
""" This is executed when run from the command line """
args = parseinput()
if args.live:
livesite = True
if args.training:
livesite = False
# allows the operator to verify the speaker is working
print('Saying speaker test...')
#sayText('This is the S E S Rollout speaker test message!')
# List available serial ports
list_ports()
#monitor_jobs_api(livesite)
monitor_jobs_selenium(livesite, args.headless)
def main(argv):
port = 1
baud = 115200
outputfile = 'log'
print 'CommTool V0.3'
try:
opts, args = getopt.getopt(argv,"hlp:o:b:",["help","list","port=","baudrate=","output="])
except getopt.GetoptError:
print 'Wrong arguments, try: python logtool.py -h'
sys.exit(2)
#parse the parameters input form console
for opt, arg in opts:
# print opt, args #debug only
if opt in ("-h", "--help"):
print 'Usage: python logtool.py [OPTION]... [FILE]...'
print 'python logtool.py -p <port> -b <baudrate> -o <logfile>'
print 'If the <args> are not set, the default values are used:'
print 'port = 1, baudrate = 115200, logfile = log.log'
print 'Example: '
print 'python logtool.py -p 2'
print 'python logtool.py -p 1 -b 9600'
print 'python logtool.py -p 1 -b 9600 -o mylog.log'
print ''
print 'Mandatory arguments to long options are mandatory for short options too.'
print '-p, --port Uart port number'
print '-b, --baudrate Baudrate for selected port'
print '-o, --output Output file for storing the log'
print '-h, --help Help doc'
print '-l, --list List avaliable com ports'
print ''
#print 'python -m serial.tools.list_ports --show the avaliable uart ports'
sys.exit()
elif opt in ("-p", "--port"):
port = string.atoi(arg)
if port < 0:
print 'Port number error'
sys.exit()
elif opt in ("-b", "--baudrate"):
baud = string.atoi(arg)
print 'baud', baud
elif opt in ("-o", "--output"):
outputfile = arg + "_COM" + str(port) + ".log"
elif opt in ("-l", "--list"):
#print(serial_ports())
list_ports()
else:
print 'Wrong pararmeters, try: python logtool.py -h'
print 'Ctrl+C to exit'
logger = logging.getLogger('LOG')
logger.setLevel(logging.DEBUG)
# create file handler which logs even debug messages
fh = logging.FileHandler(outputfile)
fh.setLevel(logging.DEBUG)
# create console handler with a higher log level
ch = logging.StreamHandler()
ch.setLevel(logging.DEBUG)
# create formatter and add it to the handlers
#formatter = logging.Formatter('%(asctime)s - %(name)s - %(levelname)s - %(message)s')
formatter = logging.Formatter('%(asctime)s - %(message)s')
ch.setFormatter(formatter)
fh.setFormatter(formatter)
# add the handlers to logger
logger.addHandler(ch)
logger.addHandler(fh)
console_color = Color()
# 'application' code
#logger.debug('debug message')
#logger.info('info message')
#logger.warn('warn message')
#logger.error('error message')
#logger.critical('critical message')
try:
ser = serial.Serial(port-1, baud, timeout=0)
#print ser
except:
print 'Can\'t open uart', port
sys.exit()
toogle_color = False
try:
while True:
start_time = datetime.now()
cur_time = start_time
last_time = start_time
s = ''
while True:
cur_time = datetime.now()
num = ser.inWaiting()
if num > 0:
last_time = cur_time
s += ser.read(num)
else:
idle_time = cur_time - last_time
time.sleep(0.001)
if idle_time.microseconds > 10000:
break
if s != '':
if not toogle_color:
toogle_color = True
console_color.set_cmd_color(FOREGROUND_GREEN | FOREGROUND_INTENSITY)
logger.info(s)
else:
toogle_color = False
console_color.reset_color()
logger.info(s)
# console_color.print_green_text(start_time)
# print s
except:
print 'Ctrl+C pressed'
ser.close()
console_color.reset_color()
print 'Exit'
args = parser.parse_args()
#convert our hex strings to ints
args.address = int(args.address,16)
args.offset = int(args.offset,16)
SERIAL_TIMEOUT = 10 #seconds
try:
ser = serial.Serial(args.com, args.speed, timeout=SERIAL_TIMEOUT)
except serial.serialutil.SerialException:
print("Error: Serial port is not valid, please select a valid port")
sys.exit(1)
if args.cmd == 'write':
write_eeprom(False)
elif args.cmd == 'write_paged':
write_eeprom(True)
elif args.cmd == 'read':
read_eeprom()
elif args.cmd == 'dump':
dump_file()
elif args.cmd == 'verify':
verify()
elif args.cmd == 'unlock':
unlock();
elif args.cmd == 'list':
list_ports()
ser.close()
sys.exit(0)
import serial.tools.list_ports
# https://pythonhosted.org/pyserial/shortintro.html#opening-serial-ports
#SERIAL_PORT = '/dev/ttyAMA0'
SERIAL_RATE = 9600
def list_ports():
list = serial.tools.list_ports.comports()
connected = []
for element in list:
connected.append(element.device)
print("Connected COM ports: " + str(connected))
return connected
def main(connected):
print(connected)
ser = serial.Serial(connected, SERIAL_RATE)
while True:
# using ser.readline() assumes each line contains a single reading
# sent using Serial.println() on the Arduino
reading = ser.readline().decode('utf-8')
# reading is a string...do whatever you want from here
print(reading)
if __name__ == "__main__":
connected = list_ports()
main(connected)
time.sleep(delay)
self.last_send = msg
try:
#self.com.write(msg + self.newline)
#self.com.write(str(msg).encode())
self.com.write(msg)
return True
except:
self.error |= ERROR_SEND
return False
def receive(self):
try:
self.last_recv = self.com.readline()
return self.last_recv
except:
self.error |= ERROR_RECV
return ''
def close(self):
try:
self.com.close()
return True
except:
self.error |= ERROR_CLOSE
return False
if __name__ == '__main__':
print('List of available ports')
print( list_ports())
def refresh_ports(self):
self.port_list.clear()
self.port_list.addItems([row[0] for row in list_ports()])
self.port_list.setCurrentIndex(self.port_list.count()-1)
def build_iterator():
config_df = get_config()
port_df = list_ports()
config_df = config_df.merge(port_df,how='left',left_on='arduino_id', right_on='serial_number')
config_df['environmental_value'] = np.nan
return(config_df)
def main():
global quiet
global color
parser = argparse.ArgumentParser(description='Python Serial Monitor %s' %
VERSION)
parser.add_argument("-p",
"--port",
default="/dev/ttyACM0",
help="Serial port")
parser.add_argument("-b",
"--baudrate",
type=int,
default=9600,
help="Serial baudrate")
parser.add_argument(
"-l",
"--log",
default=None,
help="If a file is given, also write the received data to this log")
parser.add_argument("-f",
"--format",
default='raw',
choices=['raw', 'line', 'hex', 'hexascii'],
help="Output format")
parser.add_argument(
"-w",
"--wait",
default=False,
action="store_true",
help="If given serial port is not available, wait until it shows up")
parser.add_argument("-c",
"--color",
default=False,
action="store_true",
help="Use color for output")
parser.add_argument("-t",
"--timestamp",
default=False,
action="store_true",
help="Add a timestamp to each line")
parser.add_argument(
"-q",
"--quiet",
default=False,
action="store_true",
help="Print nothing but serial log (no status or error messages)")
parser.add_argument(
"--hexbytes",
default=16,
type=int,
help="Number of bytes displayed in each line when HEX format is choosen"
)
parser.add_argument("--listjson",
default=False,
action="store_true",
help="List of available serial ports in JSON format")
parser.add_argument("--list",
default=False,
action="store_true",
help="List of available serial ports")
parser.add_argument(
"--persist",
default=False,
action="store_true",
help="Restart and try to reconnect if serial connection drops")
parser.add_argument("--version",
default=False,
action="store_true",
help="Print version")
args = parser.parse_args()
quiet = args.quiet
color = args.color
if args.version:
print("Python Serial Monitor %s" % VERSION)
exit(0)
if args.listjson:
print(json.dumps(list_ports()))
exit(0)
if args.list:
print("")
print("Available serial ports:")
for p in list_ports()["ports"]:
print(" * % -20s: %s" % (p["device"], p["description"]))
print("")
exit(0)
clear_screen()
xprint("Trying to connect to %s" % args.port)
dots = False
while True:
istream = open_port(args.port, args.baudrate)
if istream is not None or not args.wait:
break
if not quiet:
sys.stdout.write(".")
sys.stdout.flush()
dots = True
time.sleep(0.5)
if dots:
xprint("")
if istream is not None:
xprint("Successfully connected")
else:
xprint("Failed to connect", True)
exit(1)
ostream = sys.stdout
reader = SerialReader(istream)
if args.format == 'line':
writer = LineWriter(ostream)
elif args.format == 'hex':
writer = HexWriter(ostream)
writer.max_length = args.hexbytes
writer.write_ascii = False
elif args.format == 'hexascii':
writer = HexWriter(ostream)
writer.max_length = args.hexbytes
writer.write_ascii = True
else:
writer = RawWriter(ostream)
writer.add_timestamp = args.timestamp
writer.with_color = args.color
if args.log is not None:
try:
writer.log_stream = open(args.log, "w+")
except Exception as e:
xprint("Failed to open logfile: %s" % e, True)
exit(1)
monitor = Monitor(reader, writer)
try:
monitor.monitor()
except serial.serialutil.SerialException:
xprint("")
xprint("*** He's dead, Jim! ***", True)
xprint("")
if args.persist:
os.execve(sys.executable, [sys.executable] + sys.argv, os.environ)
else:
exit(1)
except KeyboardInterrupt:
if args.persist:
xprint("")
os.execve(sys.executable, [sys.executable] + sys.argv, os.environ)
else:
xprint("")
return self.receive() # Return response
def close(self):
try:
self.com.close()
return True
except:
self.error |= ERROR_CLOSE
return False
def parse_int(self, int_str):
try:
return int(int_str)
except:
self.error |= ERROR_PARSE
return None
def parse_float(self, float_str):
try:
return float(float_str)
except Exception as e:
print 'error [%s]' % float_str, e
self.error |= ERROR_PARSE
return None
if __name__ == '__main__':
print 'List of available ports'
print list_ports()
phrase += " : "
elif i != len(token_list) - 1 and token_list[i + 1][0] == "TYPE":
phrase += token_list[i][1]
elif i != len(token_list) - 1:
phrase += token_list[i][1]
phrase += ", "
else:
phrase += token_list[i][1]
phrase += "\n"
return phrase
if __name__ == "__main__":
if len(sys.argv) >= 2 and type(sys.argv[1]) is str:
# Recuperation des ports utilises
connected_ports = list_ports()
# Ouverture du port utilise si existant
if len(connected_ports) >= 0: # En realite >= 1
#~ ser = serial.Serial(connected_ports[0], 9600, timeout=1)
print("Port list : " + str(connected_ports))
# Partie Lecture de fichier
# Deux modes disponibles : lecture d'une trame ou lecture de plusieurs trames (-m)
if len(sys.argv) >= 3 and sys.argv[1] == "-m":
fp = open(sys.argv[2])
str_list = []
for line in fp:
str_list.append(line)
fp.close()
print(str_list)
for data in str_list:
# Analyse lexicale
