コード例 #1
0
ファイル: relay.py プロジェクト: chapunazar/trainmaster
def shiftRegisters(number):
	if MODE == "production":
		shiftpi.shiftRegisters(number)
	else:
		print "Using " + str(number) + " register(s)"

	return 1
コード例 #2
0
def shiftRegisters(number):
    if MODE == "production":
        shiftpi.shiftRegisters(number)
    else:
        print "Using " + str(number) + " register(s)"

    return 1
コード例 #3
0
ファイル: testshift.py プロジェクト: PortosSatrop/trainmaster
#import shiftpi
import shiftpi.shiftpi as shiftpi

shiftpi.shiftRegisters(8)

#initialize
shiftpi.digitalWrite(shiftpi.ALL, shiftpi.LOW)
shiftpi.delay(1000)

# turns shift register's pin to HIGH
shiftpi.digitalWrite(44, shiftpi.HIGH)
shiftpi.delay(500)

shiftpi.digitalWrite(45, shiftpi.HIGH)
shiftpi.delay(500)

shiftpi.digitalWrite(46, shiftpi.HIGH)
shiftpi.delay(500)

# turns shift register's pin to LOW
shiftpi.digitalWrite(44, shiftpi.LOW)
shiftpi.delay(500)

# turns all shift register pins to HIGH
shiftpi.digitalWrite(shiftpi.ALL, shiftpi.HIGH)
shiftpi.delay(1000)

#and to low
shiftpi.digitalWrite(shiftpi.ALL, shiftpi.LOW)
shiftpi.delay(1000)
コード例 #4
0
# import the things
import shiftpi.shiftpi as sp
# Number of 595n
# 1-32 2 lights per bit 
# 33 37 41 45 single lights
# 34-36 38-40 42-44 46-48 rgb lights
sp.shiftRegisters(6)
# lights go up and down either side of hearts
# ========================= #
  def slide():
    sp.digitalWrite(1, sp.HIGH)
    sp.digitalWrite(8, sp.HIGH)
    sp.digitalWrite(17, sp.HIGH)
    sp.digitalWrite(25, sp.HIGH)
    sp.delay(75)
    sp.digitalWrite(2, sp.HIGH)
    sp.digitalWrite(9, sp.HIGH)
    sp.digitalWrite(18, sp.HIGH)
    sp.digitalWrite(26, sp.HIGH)
    sp.delay(75)
    sp.digitalWrite(1, sp.LOW)
    sp.digitalWrite(8, sp.LOW)
    sp.digitalWrite(17, sp.LOW)
    sp.digitalWrite(25, sp.LOW)
    sp.delay(75)
    sp.digitalWrite(3, sp.HIGH)
    sp.digitalWrite(10, sp.HIGH)
    sp.digitalWrite(19, sp.HIGH)
    sp.digitalWrite(27, sp.HIGH)
    sp.delay(75)
    sp.digitalWrite(2, sp.LOW)
コード例 #5
0
ファイル: 595.py プロジェクト: linuxgnuru/Python_sr595
#  G   E   D   A   C  dp   B   F
segments = [
    [-1, 1, 2, 3, 4, -1, 6, 7],  # 0
    [-1, -1, -1, -1, 4, -1, 6, -1],  # 1
    [0, 1, 2, 3, -1, -1, 6, -1],  # 2
    [0, -1, 2, 3, 4, -1, 6, -1],  # 3
    [0, -1, -1, -1, 4, -1, 6, 7],  # 4
    [0, -1, 2, 3, 4, -1, -1, 7],  # 5
    [0, 1, 2, 3, 4, -1, -1, 7],  # 6
    [-1, -1, -1, 3, 4, -1, 6, -1],  # 7
    [0, 1, 2, 3, 4, -1, 6, 7],  # 8
    [0, -1, 2, 3, 4, -1, 6, 7]
]  # 9

SP.shiftRegisters(4)

if len(sys.argv) == 1:
    digit = 4
    col = 0
elif len(sys.argv) == 2:
    digit = int(sys.argv[1])
    col = 0
else:
    digit = int(sys.argv[1])
    col = int(sys.argv[2])
if digit > 9 or digit < 0:
    SP.digitalWrite(SP.ALL, SP.LOW)
    sys.exit("invalid digit")
if col < 0 or col > 3:
    SP.digitalWrite(SP.ALL, SP.LOW)
コード例 #6
0
ファイル: testshift.py プロジェクト: chapunazar/trainmaster
#import shiftpi
import shiftpi.shiftpi as shiftpi

shiftpi.shiftRegisters(8) 

#initialize
shiftpi.digitalWrite(shiftpi.ALL, shiftpi.LOW)
shiftpi.delay(1000)

# turns shift register's pin to HIGH
shiftpi.digitalWrite(44, shiftpi.HIGH)
shiftpi.delay(500)

shiftpi.digitalWrite(45, shiftpi.HIGH)
shiftpi.delay(500)

shiftpi.digitalWrite(46, shiftpi.HIGH)
shiftpi.delay(500)


# turns shift register's pin to LOW
shiftpi.digitalWrite(44, shiftpi.LOW)
shiftpi.delay(500)


# turns all shift register pins to HIGH
shiftpi.digitalWrite(shiftpi.ALL, shiftpi.HIGH)
shiftpi.delay(1000)

#and to low
shiftpi.digitalWrite(shiftpi.ALL, shiftpi.LOW)
コード例 #7
0
print("setting pins")
# Set pins as input or output
GPIO.setup(left_joystick_up, GPIO.IN, pull_up_down=GPIO.PUD_UP)
GPIO.setup(left_joystick_down, GPIO.IN, pull_up_down=GPIO.PUD_UP)
GPIO.setup(right_joystick_up, GPIO.IN, pull_up_down=GPIO.PUD_UP)
GPIO.setup(right_joystick_down, GPIO.IN, pull_up_down=GPIO.PUD_UP)
GPIO.setup(start_button, GPIO.IN, pull_up_down=GPIO.PUD_UP)
shiftpi.pinsSetup(
    **{
        "ser": shift_register_SER,
        "rclk": shift_register_RCLK,
        "srclk": shift_register_SRCLK
    })

# Setting up LED configuration with shift registers
shiftpi.shiftRegisters(2)

# Light up all LEDs
shiftpi.digitalWrite(shiftpi.ALL, shiftpi.HIGH)

# Set up MCP23017 and configure inputs
MCP = mcp_lib.MCP230XX('MCP23017', 0x20, '16bit')
for input in range(0, 16):
    MCP.set_mode(input, 'input')

standby = True
flashing = False


def motor_control():
    global left_dir