def __init__(self,name="Kepco",address='COM4',enabled=True,timeout=1):
#if ':' not in address: address+=':22518'
if address[:3].upper()=='COM':
SerialInstrument.__init__(self,name,address,enabled,timeout)
self.query_sleep=0.05
self.recv_length=65536
self.Remote()
def write(self, s, port=None):
if port is not None:
self.write("SNDT %x,#3%03d%s\n" % (port, len(s), s))
if self.protocol == 'serial':
SerialInstrument.write(self, s)
if self.protocol == 'socket':
VisaInstrument.write(self, s)
def __init__(self, name='spec_analyzer', protocol='socket',
address='', port=23, enabled=True, timeout=.1, recv_length=1024,
query_sleep=0.005, lo_power=10, lo_offset=10.55e6, baudrate=115200):
self.lo_offset = lo_offset
self.lo_power = lo_power
if (address.count('.') == 3):
#the address is in an IP address format
self.protocol = 'socket'
else:
#otherwise we treat the address as port
self.protocol = 'serial'
if address != '':
port = int(address)
if self.protocol == 'serial':
SerialInstrument.__init__(self, name, port, enabled,
timeout, recv_length, baudrate=baudrate, querysleep=query_sleep)
self.term_char = ''
time.sleep(2)
print(self.read())
elif self.protocol == 'socket':
if ':' in address:
SocketInstrument.__init__(self, name, address, enabled,
timeout, recv_length)
else:
SocketInstrument.__init__(self, name, address+':'+str(port), enabled,
timeout, recv_length)
self.recv_length = recv_length
self.term_char = ''
self.query_sleep = query_sleep
else:
print('The protocol requested is not valid.')
def __init__(self, name="Kepco", address='COM4', enabled=True, timeout=1):
#if ':' not in address: address+=':22518'
if address[:3].upper() == 'COM':
SerialInstrument.__init__(self, name, address, enabled, timeout)
self.query_sleep = 0.05
self.recv_length = 65536
self.Remote()
def __init__(self,name="",address='COM6',enabled=True,timeout=0):
if address[:3].upper()=='COM':
SerialInstrument.__init__(self,name,address,enabled,timeout,querysleep=0.1)
self.term_char='\r'
self.boxaddress = '00'
else:
WebInstrument.__init__(self,name,address,enabled)
def __init__(self,name="Lakeshore",address='COM4',enabled=True,timeout=1):
#if ':' not in address: address+=':22518'
if address[:3].upper()=='COM':
SerialInstrument.__init__(self,name,address,enabled,timeout)
else:
VisaInstrument.__init__(self,name,address,enabled, term_chars='\r')
self.query_sleep=0.05
self.recv_length=65536
self.term_char='\r'
def __init__(self, name="", address='COM5', enabled=True, timeout=1.0):
# if ':' not in address: address+=':22518'
if address[:3].upper() == 'COM':
SerialInstrument.__init__(self, name, address, enabled, timeout)
else:
VisaInstrument.__init__(self, name, address, enabled)
self.query_sleep = 0.05
self.recv_length = 65535
self.escapekey = 'XXYYXX'
def __init__(self, name="", address='COM6', enabled=True, timeout=0):
"""Note when initialized the attenuator board will reset to -31.5dB"""
SerialInstrument.__init__(self,
name,
address,
enabled,
timeout,
query_sleep=0.1)
self.term_char = '\n'
def __init__(self, name="", address='COM20', enabled=True, timeout=.02):
self.query_sleep = .005
self.timeout = timeout
self.recv_length = 32
self.term_char = '\r\n'
SerialInstrument.__init__(self, name, address, enabled, timeout, self.recv_length, baudrate=115200,
query_sleep=self.query_sleep)
self.valve_state=self.get_all()
self.pulse_state=self.get_pulse_state()
self.pulse_time=self.set_pulse_time(1)
def __init__(self,name="magnet",address='COM4',enabled=True,timeout=1):
#if ':' not in address: address+=':22518'
if address[:3].upper()=='COM':
SerialInstrument.__init__(self,name,address,enabled,timeout)
else:
VisaInstrument.__init__(self,name,address,enabled, term_chars='\r')
self.query_sleep=0.05
self.recv_length=65536
self.term_char='\r'
self.set_mode()
self.set_extended_resolution()
def __init__(self, name="", address='COM6', enabled=True, timeout=0):
if address[:3].upper() == 'COM':
SerialInstrument.__init__(self,
name,
address,
enabled,
timeout,
querysleep=0.1)
self.term_char = '\r'
self.boxaddress = '00'
else:
WebInstrument.__init__(self, name, address, enabled)
def __init__(self,
name='spec_analyzer',
protocol='socket',
address='',
port=23,
enabled=True,
timeout=.1,
recv_length=1024,
query_sleep=0.005,
lo_power=10,
lo_offset=10.55e6,
baudrate=115200):
self.lo_offset = lo_offset
self.lo_power = lo_power
if (address.count('.') == 3):
#the address is in an IP address format
self.protocol = 'socket'
else:
#otherwise we treat the address as port
self.protocol = 'serial'
if address != '':
port = int(address)
if self.protocol == 'serial':
SerialInstrument.__init__(self,
name,
port,
enabled,
timeout,
recv_length,
baudrate=baudrate,
querysleep=query_sleep)
self.term_char = ''
time.sleep(2)
print(self.read())
elif self.protocol == 'socket':
if ':' in address:
SocketInstrument.__init__(self, name, address, enabled,
timeout, recv_length)
else:
SocketInstrument.__init__(self, name,
address + ':' + str(port), enabled,
timeout, recv_length)
self.recv_length = recv_length
self.term_char = ''
self.query_sleep = query_sleep
else:
print('The protocol requested is not valid.')
def __init__(self, name="magnet", address='COM4', enabled=True, timeout=1):
#if ':' not in address: address+=':22518'
if address[:3].upper() == 'COM':
SerialInstrument.__init__(self, name, address, enabled, timeout)
else:
VisaInstrument.__init__(self,
name,
address,
enabled,
term_chars='\r')
self.query_sleep = 0.05
self.recv_length = 65536
self.term_char = '\r'
self.set_mode()
self.set_extended_resolution()
def __init__(self,
name="ArduinoADC",
address='COM4',
enabled=True,
timeout=.01):
SerialInstrument.__init__(self,
name,
address,
enabled,
timeout,
query_sleep=0.2)
self.read()
self.read()
time.sleep(0.5)
self.query('S')
def __init__(self,
name="",
address='COM3',
enabled=True,
timeout=.05,
query_timeout=20):
SerialInstrument.__init__(self,
name,
address,
enabled,
timeout,
baudrate=57600,
query_sleep=0.05)
self.term_char = '\r\n'
self.serial_lock = RLock()
self.query_timeout = query_timeout
def __init__(self,
name="",
address='COM7',
enabled=True,
timeout=.5,
config_path=None):
self.query_sleep = .05
self.timeout = timeout
self.rec_length = 1024
self.s_handle = SerialInstrument.__init__(self,
name,
address,
enabled,
timeout,
baudrate=38400,
query_sleep=self.query_sleep)
self.term_char = bytes([13])
self.c_char = {'EXT': bytes([3]), 'ENQ': bytes([5])}
self.config_path = config_path
if config_path == None:
pass
else:
try:
self.load_config(config_path=self.config)
except:
print('Unable to load pressure gauge configuration')
def __init__(self,
name="",
address='COM3',
enabled=True,
timeout=.5,
query_timeout=20):
SerialInstrument.__init__(self,
name,
address,
enabled,
timeout,
baudrate=28800,
query_sleep=0.05)
self.term_char = '\r'
self.lock = RLock()
self.query_timeout = query_timeout
self.comm_error = list()
def read(self, port=None):
if port is not None:
self.write("CONN %x,'%s'\n" % (port, self.escapekey))
self.read()
self.write(self.escapekey)
if self.protocol == 'serial':
return SerialInstrument.read(self)
if self.protocol == 'GPIB':
return VisaInstrument.read(self)
def __init__(self,
name="",
address='COM8',
enabled=True,
timeout=.5,
config_path=None):
self.query_sleep = .1
self.timeout = timeout
self.recv_length = 1024
self.s_handle = SerialInstrument.__init__(self,
name,
address,
enabled,
timeout,
baudrate=9600,
query_sleep=self.query_sleep)
self.config_path = config_path
if config_path == None:
pass
else:
try:
self.load_config(config_path=self.config)
except:
print('Unable to load Turbo Controller configuration')
def __del__(self):
if self.protocol == 'serial':
SerialInstrument.__del__(self)
if self.protocol == 'socket':
self.write('END')
SocketInstrument.__del__(self)
def read(self):
if self.protocol == 'serial':
return SerialInstrument.read(self)
if self.protocol == 'socket':
return SocketInstrument.read(self)
def write(self, s):
if self.protocol == 'serial':
SerialInstrument.write(self, s)
if self.protocol == 'socket':
SocketInstrument.write(self, s)
def __init__(self, name="PressureGauge", address='COM5',enabled=True,timeout=1):
SerialInstrument.__init__(self, name, address, enabled, timeout)
def __init__(self, name="ArduinoADC", address='COM4',enabled=True,timeout=.01):
SerialInstrument.__init__(self, name, address, enabled, timeout,query_sleep=0.2)
self.read()
self.read()
time.sleep(0.5)
self.query('S')
def __init__(self,name="",address='COM11',enabled=True,timeout=0.25):
SerialInstrument.__init__(self,name,address,enabled,timeout,query_sleep=0.2)
def __del__(self):
if self.protocol == 'serial':
SerialInstrument.__del__(self)
if self.protocol == 'socket':
self.write('END')
SocketInstrument.__del__(self)
def write(self, s):
if self.protocol == 'serial':
SerialInstrument.write(self, s)
if self.protocol == 'socket':
SocketInstrument.write(self, s)
def read(self):
if self.protocol == 'serial':
return SerialInstrument.read(self)
if self.protocol == 'socket':
return SocketInstrument.read(self)
def write(self, s):
if self.protocol == 'serial':
SerialInstrument.write(self, s)
if self.protocol == 'VISA':
VisaInstrument.write(self, s)
def read(self):
if self.protocol == 'serial':
return SerialInstrument.read(self)
if self.protocol == 'VISA':
return VisaInstrument.read(self)
def __init__(self, name="", address='COM23', enabled=True, timeout=.5):
self.query_sleep=.01
self.timeout=timeout
self.recv_length=1024
self.term_char='\r\n'
self.s_handle=SerialInstrument.__init__(self, name, address, enabled, timeout, baudrate=115200, query_sleep=self.query_sleep)
def __del__(self):
return
if self.protocol == 'serial':
SerialInstrument.__del__(self)
if self.protocol == 'VISA':
VisaInstrument.__del__(self)
def __init__(self, name="", address='COM6', enabled=True, timeout=0):
"""Note when initialized the attenuator board will reset to -31.5dB"""
SerialInstrument.__init__(self, name, address, enabled, timeout, query_sleep=0.1)
self.term_char = '\n'