class Chassis(ChassisBase): """ DELLEMC Platform-specific Chassis class """ CPLD_DIR = "/sys/devices/platform/dell-s6000-cpld.0" sfp_control = "" PORT_START = 0 PORT_END = 0 reset_reason_dict = {} reset_reason_dict[0xe] = ChassisBase.REBOOT_CAUSE_NON_HARDWARE reset_reason_dict[0x6] = ChassisBase.REBOOT_CAUSE_NON_HARDWARE reset_reason_dict[0x7] = ChassisBase.REBOOT_CAUSE_THERMAL_OVERLOAD_OTHER _num_monitor_thermals = 3 _monitor_thermal_list = [] _is_fan_control_enabled = False _fan_control_initialised = False def __init__(self): ChassisBase.__init__(self) self.status_led_reg = "system_led" self.supported_led_color = [ 'green', 'blinking green', 'amber', 'blinking amber' ] # Initialize SFP list self.PORT_START = 0 self.PORT_END = 31 EEPROM_OFFSET = 20 PORTS_IN_BLOCK = (self.PORT_END + 1) # sfp.py will read eeprom contents and retrive the eeprom data. # It will also provide support sfp controls like reset and setting # low power mode. # We pass the eeprom path and sfp control path from chassis.py # So that sfp.py implementation can be generic to all platforms eeprom_base = "/sys/class/i2c-adapter/i2c-{0}/{0}-0050/eeprom" self.sfp_control = "/sys/devices/platform/dell-s6000-cpld.0/" for index in range(0, PORTS_IN_BLOCK): eeprom_path = eeprom_base.format(index + EEPROM_OFFSET) sfp_node = Sfp(index, 'QSFP', eeprom_path, self.sfp_control, index) self._sfp_list.append(sfp_node) # Get Transceiver status self.modprs_register = self._get_transceiver_status() with open("/sys/class/dmi/id/product_name", "r") as fd: board_type = fd.read() if 'S6000-ON' in board_type: self._eeprom = Eeprom() else: self._eeprom = EepromS6000() for i in range(MAX_S6000_FANTRAY): fandrawer = FanDrawer(i) self._fan_drawer_list.append(fandrawer) self._fan_list.extend(fandrawer._fan_list) for i in range(MAX_S6000_PSU): psu = Psu(i) self._psu_list.append(psu) for i in range(MAX_S6000_THERMAL): thermal = Thermal(i) self._thermal_list.append(thermal) for i in range(MAX_S6000_COMPONENT): component = Component(i) self._component_list.append(component) def _get_cpld_register(self, reg_name): rv = 'ERR' mb_reg_file = self.CPLD_DIR + '/' + reg_name if (not os.path.isfile(mb_reg_file)): return rv try: with open(mb_reg_file, 'r') as fd: rv = fd.read() except IOError: rv = 'ERR' rv = rv.rstrip('\r\n') rv = rv.lstrip(" ") return rv def _set_cpld_register(self, reg_name, value): # On successful write, returns the value will be written on # reg_name and on failure returns 'ERR' rv = 'ERR' cpld_reg_file = self.CPLD_DIR + '/' + reg_name if (not os.path.isfile(cpld_reg_file)): return rv try: with open(cpld_reg_file, 'w') as fd: rv = fd.write(str(value)) except IOError: rv = 'ERR' return rv def _nvram_write(self, offset, val): resource = "/dev/nvram" fd = os.open(resource, os.O_RDWR) if (fd < 0): print('File open failed ', resource) return if (os.lseek(fd, offset, os.SEEK_SET) != offset): print('lseek failed on ', resource) return ret = os.write(fd, struct.pack('B', val)) if ret != 1: print('Write failed ', str(ret)) return os.close(fd) def _init_fan_control(self): if not self._fan_control_initialised: for i in range(self._num_monitor_thermals): self._monitor_thermal_list.append(Thermal(i)) self._fan_control_initialised = True def get_name(self): """ Retrieves the name of the chassis Returns: string: The name of the chassis """ return self._eeprom.get_model() def get_presence(self): """ Retrieves the presence of the chassis Returns: bool: True if chassis is present, False if not """ return True def get_model(self): """ Retrieves the model number (or part number) of the chassis Returns: string: Model/part number of chassis """ return self._eeprom.get_part_number() def get_serial(self): """ Retrieves the serial number of the chassis (Service tag) Returns: string: Serial number of chassis """ return self._eeprom.get_serial() def get_status(self): """ Retrieves the operational status of the chassis Returns: bool: A boolean value, True if chassis is operating properly False if not """ return True def get_position_in_parent(self): """ Retrieves 1-based relative physical position in parent device. Returns: integer: The 1-based relative physical position in parent device or -1 if cannot determine the position """ return -1 def is_replaceable(self): """ Indicate whether Chassis is replaceable. Returns: bool: True if it is replaceable. """ return False def get_base_mac(self): """ Retrieves the base MAC address for the chassis Returns: A string containing the MAC address in the format 'XX:XX:XX:XX:XX:XX' """ return self._eeprom.get_base_mac() def get_revision(self): """ Retrieves the hardware revision of the device Returns: string: Revision value of device """ return self._eeprom.get_revision() def get_system_eeprom_info(self): """ Retrieves the full content of system EEPROM information for the chassis Returns: A dictionary where keys are the type code defined in OCP ONIE TlvInfo EEPROM format and values are their corresponding values. """ return self._eeprom.system_eeprom_info() def get_reboot_cause(self): """ Retrieves the cause of the previous reboot """ # In S6000, We track the reboot reason by writing the reason in # NVRAM. Only Warmboot and Coldboot reason are supported here. # Since it does not support any hardware reason, we return # non_hardware as default lrr = self._get_cpld_register('last_reboot_reason') if (lrr != 'ERR'): reset_reason = int(lrr, base=16) if (reset_reason in self.reset_reason_dict): return (self.reset_reason_dict[reset_reason], None) return (ChassisBase.REBOOT_CAUSE_NON_HARDWARE, None) def _get_transceiver_status(self): presence_ctrl = self.sfp_control + 'qsfp_modprs' try: reg_file = open(presence_ctrl) except IOError as e: return False content = reg_file.readline().rstrip() reg_file.close() return int(content, 16) def get_change_event(self, timeout=0): """ Returns a nested dictionary containing all devices which have experienced a change at chassis level Args: timeout: Timeout in milliseconds (optional). If timeout == 0, this method will block until a change is detected. Returns: (bool, dict): - True if call successful, False if not; - A nested dictionary where key is a device type, value is a dictionary with key:value pairs in the format of {'device_id':'device_event'}, where device_id is the device ID for this device and device_event, status='1' represents device inserted, status='0' represents device removed. Ex. {'fan':{'0':'0', '2':'1'}, 'sfp':{'11':'0'}} indicates that fan 0 has been removed, fan 2 has been inserted and sfp 11 has been removed. """ start_time = time.time() port_dict = {} ret_dict = {"sfp": port_dict} port = self.PORT_START forever = False if timeout == 0: forever = True elif timeout > 0: timeout = timeout / float(1000) # Convert to secs else: return False, {} end_time = start_time + timeout if (start_time > end_time): return False, ret_dict # Time wrap or possibly incorrect timeout while (timeout >= 0): # Check for OIR events and return updated port_dict reg_value = self._get_transceiver_status() if (reg_value != self.modprs_register): changed_ports = (self.modprs_register ^ reg_value) while (port >= self.PORT_START and port <= self.PORT_END): # Mask off the bit corresponding to our port mask = (1 << port) if (changed_ports & mask): # ModPrsL is active low if reg_value & mask == 0: port_dict[port] = '1' else: port_dict[port] = '0' port += 1 # Update reg value self.modprs_register = reg_value return True, ret_dict if forever: time.sleep(1) else: timeout = end_time - time.time() if timeout >= 1: time.sleep(1) # We poll at 1 second granularity else: if timeout > 0: time.sleep(timeout) return True, ret_dict return False, ret_dict def initizalize_system_led(self): return True def set_status_led(self, color): """ Sets the state of the system LED Args: color: A string representing the color with which to set the system LED Returns: bool: True if system LED state is set successfully, False if not """ if color not in self.supported_led_color: return False # Change color string format to the one used by driver color = color.replace('amber', 'yellow') color = color.replace('blinking ', 'blink_') rv = self._set_cpld_register(self.status_led_reg, color) if (rv != 'ERR'): return True else: return False def get_status_led(self): """ Gets the state of the system LED Returns: A string, one of the valid LED color strings which could be vendor specified. """ status_led = self._get_cpld_register(self.status_led_reg) if (status_led != 'ERR'): status_led = status_led.replace('yellow', 'amber') status_led = status_led.replace('blink_', 'blinking ') return status_led else: return None def get_thermal_manager(self): """ Retrieves thermal manager class on this chassis Returns: A class derived from ThermalManagerBase representing the specified thermal manager """ from .thermal_manager import ThermalManager return ThermalManager def set_fan_control_status(self, enable): if enable and not self._is_fan_control_enabled: self._init_fan_control() for thermal in self._monitor_thermal_list: thermal.set_high_threshold(LEVEL5_THRESHOLD, force=True) self._is_fan_control_enabled = True elif not enable and self._is_fan_control_enabled: for thermal in self._monitor_thermal_list: thermal.set_high_threshold(LEVEL4_THRESHOLD, force=True) self._is_fan_control_enabled = False def get_monitor_thermals(self): return self._monitor_thermal_list def thermal_shutdown(self): # Update reboot cause self._nvram_write(0x49, 0x7) subprocess.call('sync') time.sleep(1) for thermal in self._monitor_thermal_list: thermal.set_high_threshold(LEVEL4_THRESHOLD, force=True) @staticmethod def get_system_thermal_level(curr_thermal_level, system_temperature): def get_level_in_hystersis(curr_level, level1, level2): if curr_level != level1 and curr_level != level2: return level1 if abs(curr_level - level1) < abs(curr_level - level2) else level2 else: return curr_level if system_temperature < LEVEL0_THRESHOLD: curr_thermal_level = 0 elif LEVEL0_THRESHOLD <= system_temperature < LEVEL1_THRESHOLD: curr_thermal_level = get_level_in_hystersis( curr_thermal_level, 0, 1) elif LEVEL1_THRESHOLD <= system_temperature <= (LEVEL2_THRESHOLD - HYST_RANGE): curr_thermal_level = 1 elif (LEVEL2_THRESHOLD - HYST_RANGE) < system_temperature < LEVEL2_THRESHOLD: curr_thermal_level = get_level_in_hystersis( curr_thermal_level, 1, 2) elif LEVEL2_THRESHOLD <= system_temperature <= (LEVEL3_THRESHOLD - HYST_RANGE): curr_thermal_level = 2 elif (LEVEL3_THRESHOLD - HYST_RANGE) < system_temperature < LEVEL3_THRESHOLD: curr_thermal_level = get_level_in_hystersis( curr_thermal_level, 2, 3) elif LEVEL3_THRESHOLD <= system_temperature < LEVEL4_THRESHOLD: curr_thermal_level = 3 else: curr_thermal_level = 4 return curr_thermal_level @staticmethod def is_over_temperature(temperature_list): over_temperature = False for temperature in temperature_list: if temperature > LEVEL4_THRESHOLD: over_temperature = True break return over_temperature
class Psu(PsuBase): """DellEMC Platform-specific PSU class""" CPLD_DIR = "/sys/devices/platform/dell-s6000-cpld.0/" I2C_DIR = "/sys/class/i2c-adapter/" def __init__(self, psu_index): PsuBase.__init__(self) # PSU is 1-based in DellEMC platforms self.index = psu_index + 1 self.psu_presence_reg = "psu{}_prs".format(psu_index) self.psu_status_reg = "powersupply_status" self.is_driver_initialized = False if self.index == 1: ltc_dir = self.I2C_DIR + "i2c-11/11-0042/hwmon/" else: ltc_dir = self.I2C_DIR + "i2c-11/11-0040/hwmon/" try: hwmon_node = os.listdir(ltc_dir)[0] except OSError: hwmon_node = "hwmon*" else: self.is_driver_initialized = True self.HWMON_DIR = ltc_dir + hwmon_node + '/' self.psu_voltage_reg = self.HWMON_DIR + "in1_input" self.psu_current_reg = self.HWMON_DIR + "curr1_input" self.psu_power_reg = self.HWMON_DIR + "power1_input" self.eeprom = Eeprom(is_psu=True, psu_index=self.index) self._fan_list.append(Fan(psu_index=self.index, psu_fan=True, dependency=self)) for i in range(1, MAX_S6000_THERMALS_PER_PSU+1): self._thermal_list.append(Thermal(psu_index=self.index, thermal_index=i, psu_thermal=True, dependency=self)) def _get_cpld_register(self, reg_name): # On successful read, returns the value read from given # reg_name and on failure returns 'ERR' rv = 'ERR' cpld_reg_file = self.CPLD_DIR + reg_name if (not os.path.isfile(cpld_reg_file)): return rv try: with open(cpld_reg_file, 'r') as fd: rv = fd.read() except: rv = 'ERR' rv = rv.rstrip('\r\n') rv = rv.lstrip(" ") return rv def _get_i2c_register(self, reg_file): # On successful read, returns the value read from given # reg_name and on failure returns 'ERR' rv = 'ERR' if not self.is_driver_initialized: reg_file_path = glob.glob(reg_file) if len(reg_file_path): reg_file = reg_file_path[0] self._get_sysfs_path() else: return rv if (not os.path.isfile(reg_file)): return rv try: with open(reg_file, 'r') as fd: rv = fd.read() except: rv = 'ERR' rv = rv.rstrip('\r\n') rv = rv.lstrip(" ") return rv def _get_sysfs_path(self): voltage_reg = glob.glob(self.psu_voltage_reg) current_reg = glob.glob(self.psu_current_reg) power_reg = glob.glob(self.psu_power_reg) if len(voltage_reg) and len(current_reg) and len(power_reg): self.psu_voltage_reg = voltage_reg[0] self.psu_current_reg = current_reg[0] self.psu_power_reg = power_reg[0] self.is_driver_initialized = True def get_name(self): """ Retrieves the name of the device Returns: string: The name of the device """ return "PSU{}".format(self.index) def get_presence(self): """ Retrieves the presence of the Power Supply Unit (PSU) Returns: bool: True if PSU is present, False if not """ status = False psu_presence = self._get_cpld_register(self.psu_presence_reg) if (psu_presence != 'ERR'): psu_presence = int(psu_presence) if psu_presence: status = True return status def get_model(self): """ Retrieves the part number of the PSU Returns: string: Part number of PSU """ return self.eeprom.get_part_number() def get_serial(self): """ Retrieves the serial number of the PSU Returns: string: Serial number of PSU """ # Sample Serial number format "US-01234D-54321-25A-0123-A00" return self.eeprom.get_serial_number() def get_revision(self): """ Retrieves the hardware revision of the device Returns: string: Revision value of device """ return self.eeprom.get_revision() def get_status(self): """ Retrieves the operational status of the PSU Returns: bool: True if PSU is operating properly, False if not """ status = False psu_status = self._get_cpld_register(self.psu_status_reg) if (psu_status != 'ERR'): psu_status = (int(psu_status, 16) >> int((2 - self.index) * 4)) & 0xF if (~psu_status & 0b1000) and (~psu_status & 0b0100): status = True return status def get_position_in_parent(self): """ Retrieves 1-based relative physical position in parent device. Returns: integer: The 1-based relative physical position in parent device or -1 if cannot determine the position """ return self.index def is_replaceable(self): """ Indicate whether PSU is replaceable. Returns: bool: True if it is replaceable. """ return True def get_voltage(self): """ Retrieves current PSU voltage output Returns: A float number, the output voltage in volts, e.g. 12.1 """ psu_voltage = self._get_i2c_register(self.psu_voltage_reg) if (psu_voltage != 'ERR') and self.get_status(): # Converting the value returned by driver which is in # millivolts to volts psu_voltage = float(psu_voltage) / 1000 else: psu_voltage = 0.0 return psu_voltage def get_current(self): """ Retrieves present electric current supplied by PSU Returns: A float number, electric current in amperes, e.g. 15.4 """ psu_current = self._get_i2c_register(self.psu_current_reg) if (psu_current != 'ERR') and self.get_status(): # Converting the value returned by driver which is in # milliamperes to amperes psu_current = float(psu_current) / 1000 else: psu_current = 0.0 return psu_current def get_power(self): """ Retrieves current energy supplied by PSU Returns: A float number, the power in watts, e.g. 302.6 """ psu_power = self._get_i2c_register(self.psu_power_reg) if (psu_power != 'ERR') and self.get_status(): # Converting the value returned by driver which is in # microwatts to watts psu_power = float(psu_power) / 1000000 else: psu_power = 0.0 return psu_power def get_maximum_supplied_power(self): """ Retrieves the maximum supplied power by PSU Returns: A float number, the maximum power output in Watts. e.g. 1200.1 """ if self.get_presence(): psu_maxpower = 460.0 else: psu_maxpower = 0.0 return psu_maxpower def get_powergood_status(self): """ Retrieves the powergood status of PSU Returns: A boolean, True if PSU has stablized its output voltages and passed all its internal self-tests, False if not. """ status = False psu_status = self._get_cpld_register(self.psu_status_reg) if (psu_status != 'ERR'): psu_status = (int(psu_status, 16) >> ((2 - self.index) * 4)) & 0xF if (psu_status == 0x2): status = True return status def get_status_led(self): """ Gets the state of the PSU status LED Returns: A string, one of the predefined STATUS_LED_COLOR_* strings. """ if self.get_powergood_status(): return self.STATUS_LED_COLOR_GREEN else: return self.STATUS_LED_COLOR_OFF def set_status_led(self, color): """ Sets the state of the PSU status LED Args: color: A string representing the color with which to set the PSU status LED Returns: bool: True if status LED state is set successfully, False if not """ # In S6000, the firmware running in the PSU controls the LED # and the PSU LED state cannot be changed from CPU. return False def get_temperature(self): """ Retrieves current temperature reading from PSU Returns: A float number of current temperature in Celsius up to nearest thousandth of one degree Celsius, e.g. 30.125 """ if self.get_presence(): return self.get_thermal(0).get_temperature() else: return 0.0 def get_temperature_high_threshold(self): """ Retrieves the high threshold temperature of PSU Returns: A float number, the high threshold temperature of PSU in Celsius up to nearest thousandth of one degree Celsius, e.g. 30.125 """ if self.get_presence(): return self.get_thermal(0).get_high_threshold() else: return 0.0 def get_voltage_high_threshold(self): """ Retrieves the high threshold PSU voltage output Returns: A float number, the high threshold output voltage in volts, e.g. 12.1 """ return 12.6 def get_voltage_low_threshold(self): """ Retrieves the low threshold PSU voltage output Returns: A float number, the low threshold output voltage in volts, e.g. 12.1 """ return 11.4