def __init__(self, parent=None):
QPlainTextEdit.__init__(self, parent)
BaseEditMixin.__init__(self)
self.setAttribute(Qt.WA_DeleteOnClose)
self.extra_selections_dict = {}
self._restore_selection_pos = None
# Code snippets
self.code_snippets = True
self.textChanged.connect(self.changed)
self.cursorPositionChanged.connect(self.cursor_position_changed)
self.indent_chars = " " * 4
self.tab_stop_width_spaces = 4
# Code completion / calltips
if parent is not None:
mainwin = parent
while not isinstance(mainwin, QMainWindow):
mainwin = mainwin.parent()
if mainwin is None:
break
if mainwin is not None:
parent = mainwin
self.completion_widget = CompletionWidget(self, parent)
self.codecompletion_auto = False
self.setup_completion()
self.calltip_widget = CallTipWidget(self, hide_timer_on=False)
self.calltip_position = None
self.tooltip_widget = ToolTipWidget(self, as_tooltip=True)
self.highlight_current_cell_enabled = False
# The color values may be overridden by the syntax highlighter
# Highlight current line color
self.currentline_color = QColor(Qt.red).lighter(190)
self.currentcell_color = QColor(Qt.red).lighter(194)
# Brace matching
self.bracepos = None
self.matched_p_color = QColor(Qt.green)
self.unmatched_p_color = QColor(Qt.red)
self.decorations = TextDecorationsManager(self)
# Save current cell. This is invalidated as soon as the text changes.
# Useful to avoid recomputing while scrolling.
self.current_cell = None
self._cell_list = []
def reset_current_cell():
self.current_cell = None
self.textChanged.connect(reset_current_cell)
class TextEditBaseWidget(QPlainTextEdit, BaseEditMixin):
"""Text edit base widget"""
BRACE_MATCHING_SCOPE = ('sof', 'eof')
cell_separators = None
focus_in = Signal()
zoom_in = Signal()
zoom_out = Signal()
zoom_reset = Signal()
focus_changed = Signal()
sig_insert_completion = Signal(str)
sig_eol_chars_changed = Signal(str)
def __init__(self, parent=None):
QPlainTextEdit.__init__(self, parent)
BaseEditMixin.__init__(self)
self.setAttribute(Qt.WA_DeleteOnClose)
self.extra_selections_dict = {}
self._restore_selection_pos = None
# Code snippets
self.code_snippets = True
self.textChanged.connect(self.changed)
self.cursorPositionChanged.connect(self.cursor_position_changed)
self.indent_chars = " " * 4
self.tab_stop_width_spaces = 4
# Code completion / calltips
if parent is not None:
mainwin = parent
while not isinstance(mainwin, QMainWindow):
mainwin = mainwin.parent()
if mainwin is None:
break
if mainwin is not None:
parent = mainwin
self.completion_widget = CompletionWidget(self, parent)
self.codecompletion_auto = False
self.setup_completion()
self.calltip_widget = CallTipWidget(self, hide_timer_on=False)
self.calltip_position = None
self.tooltip_widget = ToolTipWidget(self, as_tooltip=True)
self.highlight_current_cell_enabled = False
# The color values may be overridden by the syntax highlighter
# Highlight current line color
self.currentline_color = QColor(Qt.red).lighter(190)
self.currentcell_color = QColor(Qt.red).lighter(194)
# Brace matching
self.bracepos = None
self.matched_p_color = QColor(Qt.green)
self.unmatched_p_color = QColor(Qt.red)
self.decorations = TextDecorationsManager(self)
# Save current cell. This is invalidated as soon as the text changes.
# Useful to avoid recomputing while scrolling.
self.current_cell = None
def reset_current_cell():
self.current_cell = None
self.textChanged.connect(reset_current_cell)
def setup_completion(self):
size = CONF.get('main', 'completion/size')
font = get_font()
self.completion_widget.setup_appearance(size, font)
def set_indent_chars(self, indent_chars):
self.indent_chars = indent_chars
def set_tab_stop_width_spaces(self, tab_stop_width_spaces):
self.tab_stop_width_spaces = tab_stop_width_spaces
self.update_tab_stop_width_spaces()
def update_tab_stop_width_spaces(self):
self.setTabStopWidth(self.fontMetrics().width(
' ' * self.tab_stop_width_spaces))
def set_palette(self, background, foreground):
"""
Set text editor palette colors:
background color and caret (text cursor) color
"""
# Because QtStylsheet overrides QPalette and because some style do not
# use the palette for all drawing (e.g. macOS styles), the background
# and foreground color of each TextEditBaseWidget instance must be set
# with a stylesheet extended with an ID Selector.
# Fixes spyder-ide/spyder#2028, spyder-ide/spyder#8069 and
# spyder-ide/spyder#9248.
if not self.objectName():
self.setObjectName(self.__class__.__name__ + str(id(self)))
style = "QPlainTextEdit#%s {background: %s; color: %s;}" % \
(self.objectName(), background.name(), foreground.name())
self.setStyleSheet(style)
# ---- Extra selections
def get_extra_selections(self, key):
"""Return editor extra selections.
Args:
key (str) name of the extra selections group
Returns:
list of sourcecode.api.TextDecoration.
"""
return self.extra_selections_dict.get(key, [])
def set_extra_selections(self, key, extra_selections):
"""Set extra selections for a key.
Also assign draw orders to leave current_cell and current_line
in the backgrund (and avoid them to cover other decorations)
NOTE: This will remove previous decorations added to the same key.
Args:
key (str) name of the extra selections group.
extra_selections (list of sourcecode.api.TextDecoration).
"""
# use draw orders to highlight current_cell and current_line first
draw_order = DRAW_ORDERS.get(key)
if draw_order is None:
draw_order = DRAW_ORDERS.get('on_top')
for selection in extra_selections:
selection.draw_order = draw_order
self.clear_extra_selections(key)
self.extra_selections_dict[key] = extra_selections
def update_extra_selections(self):
"""Add extra selections to DecorationsManager.
TODO: This method could be remove it and decorations could be
added/removed in set_extra_selections/clear_extra_selections.
"""
extra_selections = []
for key, extra in list(self.extra_selections_dict.items()):
extra_selections.extend(extra)
self.decorations.add(extra_selections)
def clear_extra_selections(self, key):
"""Remove decorations added through set_extra_selections.
Args:
key (str) name of the extra selections group.
"""
for decoration in self.extra_selections_dict.get(key, []):
self.decorations.remove(decoration)
self.extra_selections_dict[key] = []
def changed(self):
"""Emit changed signal"""
self.modificationChanged.emit(self.document().isModified())
#------Highlight current line
def highlight_current_line(self):
"""Highlight current line"""
selection = TextDecoration(self.textCursor())
selection.format.setProperty(QTextFormat.FullWidthSelection,
to_qvariant(True))
selection.format.setBackground(self.currentline_color)
selection.cursor.clearSelection()
self.set_extra_selections('current_line', [selection])
self.update_extra_selections()
def unhighlight_current_line(self):
"""Unhighlight current line"""
self.clear_extra_selections('current_line')
#------Highlight current cell
def highlight_current_cell(self):
"""Highlight current cell"""
if self.cell_separators is None or \
not self.highlight_current_cell_enabled:
return
cursor, whole_file_selected =\
self.select_current_cell_in_visible_portion()
selection = TextDecoration(cursor)
selection.format.setProperty(QTextFormat.FullWidthSelection,
to_qvariant(True))
selection.format.setBackground(self.currentcell_color)
if whole_file_selected:
self.clear_extra_selections('current_cell')
else:
self.set_extra_selections('current_cell', [selection])
self.update_extra_selections()
def unhighlight_current_cell(self):
"""Unhighlight current cell"""
self.clear_extra_selections('current_cell')
#------Brace matching
def find_brace_match(self, position, brace, forward):
start_pos, end_pos = self.BRACE_MATCHING_SCOPE
if forward:
bracemap = {'(': ')', '[': ']', '{': '}'}
text = self.get_text(position, end_pos)
i_start_open = 1
i_start_close = 1
else:
bracemap = {')': '(', ']': '[', '}': '{'}
text = self.get_text(start_pos, position)
i_start_open = len(text) - 1
i_start_close = len(text) - 1
while True:
if forward:
i_close = text.find(bracemap[brace], i_start_close)
else:
i_close = text.rfind(bracemap[brace], 0, i_start_close + 1)
if i_close > -1:
if forward:
i_start_close = i_close + 1
i_open = text.find(brace, i_start_open, i_close)
else:
i_start_close = i_close - 1
i_open = text.rfind(brace, i_close, i_start_open + 1)
if i_open > -1:
if forward:
i_start_open = i_open + 1
else:
i_start_open = i_open - 1
else:
# found matching brace
if forward:
return position + i_close
else:
return position - (len(text) - i_close)
else:
# no matching brace
return
def __highlight(self, positions, color=None, cancel=False):
if cancel:
self.clear_extra_selections('brace_matching')
return
extra_selections = []
for position in positions:
if position > self.get_position('eof'):
return
selection = TextDecoration(self.textCursor())
selection.format.setBackground(color)
selection.cursor.clearSelection()
selection.cursor.setPosition(position)
selection.cursor.movePosition(QTextCursor.NextCharacter,
QTextCursor.KeepAnchor)
extra_selections.append(selection)
self.set_extra_selections('brace_matching', extra_selections)
self.update_extra_selections()
def cursor_position_changed(self):
"""Brace matching"""
if self.bracepos is not None:
self.__highlight(self.bracepos, cancel=True)
self.bracepos = None
cursor = self.textCursor()
if cursor.position() == 0:
return
cursor.movePosition(QTextCursor.PreviousCharacter,
QTextCursor.KeepAnchor)
text = to_text_string(cursor.selectedText())
pos1 = cursor.position()
if text in (')', ']', '}'):
pos2 = self.find_brace_match(pos1, text, forward=False)
elif text in ('(', '[', '{'):
pos2 = self.find_brace_match(pos1, text, forward=True)
else:
return
if pos2 is not None:
self.bracepos = (pos1, pos2)
self.__highlight(self.bracepos, color=self.matched_p_color)
else:
self.bracepos = (pos1, )
self.__highlight(self.bracepos, color=self.unmatched_p_color)
#-----Widget setup and options
def set_codecompletion_auto(self, state):
"""Set code completion state"""
self.codecompletion_auto = state
def set_wrap_mode(self, mode=None):
"""
Set wrap mode
Valid *mode* values: None, 'word', 'character'
"""
if mode == 'word':
wrap_mode = QTextOption.WrapAtWordBoundaryOrAnywhere
elif mode == 'character':
wrap_mode = QTextOption.WrapAnywhere
else:
wrap_mode = QTextOption.NoWrap
self.setWordWrapMode(wrap_mode)
#------Reimplementing Qt methods
@Slot()
def copy(self):
"""
Reimplement Qt method
Copy text to clipboard with correct EOL chars
"""
if self.get_selected_text():
QApplication.clipboard().setText(self.get_selected_text())
def toPlainText(self):
"""
Reimplement Qt method
Fix PyQt4 bug on Windows and Python 3
"""
# Fix what appears to be a PyQt4 bug when getting file
# contents under Windows and PY3. This bug leads to
# corruptions when saving files with certain combinations
# of unicode chars on them (like the one attached on
# spyder-ide/spyder#1546).
if os.name == 'nt' and PY3:
text = self.get_text('sof', 'eof')
return text.replace('\u2028', '\n').replace('\u2029', '\n')\
.replace('\u0085', '\n')
else:
return super(TextEditBaseWidget, self).toPlainText()
def keyPressEvent(self, event):
text, key = event.text(), event.key()
ctrl = event.modifiers() & Qt.ControlModifier
meta = event.modifiers() & Qt.MetaModifier
# Use our own copy method for {Ctrl,Cmd}+C to avoid Qt
# copying text in HTML. See spyder-ide/spyder#2285.
if (ctrl or meta) and key == Qt.Key_C:
self.copy()
else:
super(TextEditBaseWidget, self).keyPressEvent(event)
#------Text: get, set, ...
def get_selection_as_executable_code(self, cursor=None):
"""Return selected text as a processed text,
to be executable in a Python/IPython interpreter"""
ls = self.get_line_separator()
_indent = lambda line: len(line) - len(line.lstrip())
line_from, line_to = self.get_selection_bounds(cursor)
text = self.get_selected_text(cursor)
if not text:
return
lines = text.split(ls)
if len(lines) > 1:
# Multiline selection -> eventually fixing indentation
original_indent = _indent(self.get_text_line(line_from))
text = (" " * (original_indent - _indent(lines[0]))) + text
# If there is a common indent to all lines, find it.
# Moving from bottom line to top line ensures that blank
# lines inherit the indent of the line *below* it,
# which is the desired behavior.
min_indent = 999
current_indent = 0
lines = text.split(ls)
for i in range(len(lines) - 1, -1, -1):
line = lines[i]
if line.strip():
current_indent = _indent(line)
min_indent = min(current_indent, min_indent)
else:
lines[i] = ' ' * current_indent
if min_indent:
lines = [line[min_indent:] for line in lines]
# Remove any leading whitespace or comment lines
# since they confuse the reserved word detector that follows below
lines_removed = 0
while lines:
first_line = lines[0].lstrip()
if first_line == '' or first_line[0] == '#':
lines_removed += 1
lines.pop(0)
else:
break
# Add an EOL character after the last line of code so that it gets
# evaluated automatically by the console and any quote characters
# are separated from the triple quotes of runcell
lines.append(ls)
# Add removed lines back to have correct traceback line numbers
leading_lines_str = ls * lines_removed
return leading_lines_str + ls.join(lines)
def get_cell_as_executable_code(self, cursor=None):
"""Return cell contents as executable code."""
if cursor is None:
cursor = self.textCursor()
ls = self.get_line_separator()
cursor, whole_file_selected = self.select_current_cell(cursor)
line_from, line_to = self.get_selection_bounds(cursor)
# Get the block for the first cell line
start = cursor.selectionStart()
block = self.document().findBlock(start)
if not is_cell_header(block) and start > 0:
block = self.document().findBlock(start - 1)
# Get text
text = self.get_selection_as_executable_code(cursor)
if text is not None:
text = ls * line_from + text
return text, block
def is_cell_separator(self, cursor=None, block=None):
"""Return True if cursor (or text block) is on a block separator"""
assert cursor is not None or block is not None
if cursor is not None:
block = cursor.block()
text = to_text_string(block.text())
if self.cell_separators is None:
return False
else:
return text.lstrip().startswith(self.cell_separators)
def select_current_cell(self, cursor=None):
"""
Select cell under cursor.
cell = group of lines separated by CELL_SEPARATORS
returns the textCursor and a boolean indicating if the
entire file is selected.
"""
if cursor is None:
cursor = self.textCursor()
cursor.movePosition(QTextCursor.StartOfBlock)
cur_pos = prev_pos = cursor.position()
# Moving to the next line that is not a separator, if we are
# exactly at one of them
while self.is_cell_separator(cursor):
cursor.movePosition(QTextCursor.NextBlock)
prev_pos = cur_pos
cur_pos = cursor.position()
if cur_pos == prev_pos:
return cursor, False
prev_pos = cur_pos
# If not, move backwards to find the previous separator
while not self.is_cell_separator(cursor):
cursor.movePosition(QTextCursor.PreviousBlock)
prev_pos = cur_pos
cur_pos = cursor.position()
if cur_pos == prev_pos:
if self.is_cell_separator(cursor):
return cursor, False
else:
break
cursor.setPosition(prev_pos)
cell_at_file_start = cursor.atStart()
# Once we find it (or reach the beginning of the file)
# move to the next separator (or the end of the file)
# so we can grab the cell contents
while not self.is_cell_separator(cursor):
cursor.movePosition(QTextCursor.NextBlock, QTextCursor.KeepAnchor)
cur_pos = cursor.position()
if cur_pos == prev_pos:
cursor.movePosition(QTextCursor.EndOfBlock,
QTextCursor.KeepAnchor)
break
prev_pos = cur_pos
cell_at_file_end = cursor.atEnd()
return cursor, cell_at_file_start and cell_at_file_end
def select_current_cell_in_visible_portion(self):
"""
Select cell under cursor in the visible portion of the file
cell = group of lines separated by CELL_SEPARATORS
returns
-the textCursor
-a boolean indicating if the entire file is selected
"""
cursor = self.textCursor()
if self.current_cell:
current_cell, cell_full_file = self.current_cell
cell_start_pos = current_cell.selectionStart()
cell_end_position = current_cell.selectionEnd()
# Check if the saved current cell is still valid
if cell_start_pos <= cursor.position() <= cell_end_position:
return current_cell, cell_full_file
else:
self.current_cell = None
block = cursor.block()
try:
if is_cell_header(block):
header = block.userData().oedata
else:
header = next(document_cells(block, forward=False))
cell_start_pos = header.block.position()
cell_at_file_start = False
cursor.setPosition(cell_start_pos)
except StopIteration:
# This cell has no header, so it is the first cell.
cell_at_file_start = True
cursor.movePosition(QTextCursor.Start)
try:
footer = next(document_cells(block, forward=True))
cell_end_position = footer.block.position()
cell_at_file_end = False
cursor.setPosition(cell_end_position, QTextCursor.KeepAnchor)
except StopIteration:
# This cell has no next header, so it is the last cell.
cell_at_file_end = True
cursor.movePosition(QTextCursor.End, QTextCursor.KeepAnchor)
cell_full_file = cell_at_file_start and cell_at_file_end
self.current_cell = (cursor, cell_full_file)
return cursor, cell_full_file
def go_to_next_cell(self):
"""Go to the next cell of lines"""
cursor = self.textCursor()
cursor.movePosition(QTextCursor.NextBlock)
cur_pos = prev_pos = cursor.position()
while not self.is_cell_separator(cursor):
# Moving to the next code cell
cursor.movePosition(QTextCursor.NextBlock)
prev_pos = cur_pos
cur_pos = cursor.position()
if cur_pos == prev_pos:
return
self.setTextCursor(cursor)
def go_to_previous_cell(self):
"""Go to the previous cell of lines"""
cursor = self.textCursor()
cur_pos = prev_pos = cursor.position()
if self.is_cell_separator(cursor):
# Move to the previous cell
cursor.movePosition(QTextCursor.PreviousBlock)
cur_pos = prev_pos = cursor.position()
while not self.is_cell_separator(cursor):
# Move to the previous cell or the beginning of the current cell
cursor.movePosition(QTextCursor.PreviousBlock)
prev_pos = cur_pos
cur_pos = cursor.position()
if cur_pos == prev_pos:
return
self.setTextCursor(cursor)
def get_line_count(self):
"""Return document total line number"""
return self.blockCount()
def paintEvent(self, e):
"""
Override Qt method to restore text selection after text gets inserted
at the current position of the cursor.
See spyder-ide/spyder#11089 for more info.
"""
if self._restore_selection_pos is not None:
self.__restore_selection(*self._restore_selection_pos)
self._restore_selection_pos = None
super(TextEditBaseWidget, self).paintEvent(e)
def __save_selection(self):
"""Save current cursor selection and return position bounds"""
cursor = self.textCursor()
return cursor.selectionStart(), cursor.selectionEnd()
def __restore_selection(self, start_pos, end_pos):
"""Restore cursor selection from position bounds"""
cursor = self.textCursor()
cursor.setPosition(start_pos)
cursor.setPosition(end_pos, QTextCursor.KeepAnchor)
self.setTextCursor(cursor)
def __duplicate_line_or_selection(self, after_current_line=True):
"""Duplicate current line or selected text"""
cursor = self.textCursor()
cursor.beginEditBlock()
cur_pos = cursor.position()
start_pos, end_pos = self.__save_selection()
end_pos_orig = end_pos
if to_text_string(cursor.selectedText()):
cursor.setPosition(end_pos)
# Check if end_pos is at the start of a block: if so, starting
# changes from the previous block
cursor.movePosition(QTextCursor.StartOfBlock,
QTextCursor.KeepAnchor)
if not to_text_string(cursor.selectedText()):
cursor.movePosition(QTextCursor.PreviousBlock)
end_pos = cursor.position()
cursor.setPosition(start_pos)
cursor.movePosition(QTextCursor.StartOfBlock)
while cursor.position() <= end_pos:
cursor.movePosition(QTextCursor.EndOfBlock, QTextCursor.KeepAnchor)
if cursor.atEnd():
cursor_temp = QTextCursor(cursor)
cursor_temp.clearSelection()
cursor_temp.insertText(self.get_line_separator())
break
cursor.movePosition(QTextCursor.NextBlock, QTextCursor.KeepAnchor)
text = cursor.selectedText()
cursor.clearSelection()
if not after_current_line:
# Moving cursor before current line/selected text
cursor.setPosition(start_pos)
cursor.movePosition(QTextCursor.StartOfBlock)
start_pos += len(text)
end_pos_orig += len(text)
cur_pos += len(text)
# We save the end and start position of the selection, so that it
# can be restored within the paint event that is triggered by the
# text insertion. This is done to prevent a graphical glitch that
# occurs when text gets inserted at the current position of the cursor.
# See spyder-ide/spyder#11089 for more info.
if cur_pos == start_pos:
self._restore_selection_pos = (end_pos_orig, start_pos)
else:
self._restore_selection_pos = (start_pos, end_pos_orig)
cursor.insertText(text)
cursor.endEditBlock()
def duplicate_line_down(self):
"""
Copy current line or selected text and paste the duplicated text
*after* the current line or selected text.
"""
self.__duplicate_line_or_selection(after_current_line=True)
def duplicate_line_up(self):
"""
Copy current line or selected text and paste the duplicated text
*before* the current line or selected text.
"""
self.__duplicate_line_or_selection(after_current_line=False)
def __move_line_or_selection(self, after_current_line=True):
"""Move current line or selected text"""
cursor = self.textCursor()
cursor.beginEditBlock()
start_pos, end_pos = self.__save_selection()
last_line = False
# ------ Select text
# Get selection start location
cursor.setPosition(start_pos)
cursor.movePosition(QTextCursor.StartOfBlock)
start_pos = cursor.position()
# Get selection end location
cursor.setPosition(end_pos)
if not cursor.atBlockStart() or end_pos == start_pos:
cursor.movePosition(QTextCursor.EndOfBlock)
cursor.movePosition(QTextCursor.NextBlock)
end_pos = cursor.position()
# Check if selection ends on the last line of the document
if cursor.atEnd():
if not cursor.atBlockStart() or end_pos == start_pos:
last_line = True
# ------ Stop if at document boundary
cursor.setPosition(start_pos)
if cursor.atStart() and not after_current_line:
# Stop if selection is already at top of the file while moving up
cursor.endEditBlock()
self.setTextCursor(cursor)
self.__restore_selection(start_pos, end_pos)
return
cursor.setPosition(end_pos, QTextCursor.KeepAnchor)
if last_line and after_current_line:
# Stop if selection is already at end of the file while moving down
cursor.endEditBlock()
self.setTextCursor(cursor)
self.__restore_selection(start_pos, end_pos)
return
# ------ Move text
sel_text = to_text_string(cursor.selectedText())
cursor.removeSelectedText()
if after_current_line:
# Shift selection down
text = to_text_string(cursor.block().text())
sel_text = os.linesep + sel_text[0:-1] # Move linesep at the start
cursor.movePosition(QTextCursor.EndOfBlock)
start_pos += len(text) + 1
end_pos += len(text)
if not cursor.atEnd():
end_pos += 1
else:
# Shift selection up
if last_line:
# Remove the last linesep and add it to the selected text
cursor.deletePreviousChar()
sel_text = sel_text + os.linesep
cursor.movePosition(QTextCursor.StartOfBlock)
end_pos += 1
else:
cursor.movePosition(QTextCursor.PreviousBlock)
text = to_text_string(cursor.block().text())
start_pos -= len(text) + 1
end_pos -= len(text) + 1
cursor.insertText(sel_text)
cursor.endEditBlock()
self.setTextCursor(cursor)
self.__restore_selection(start_pos, end_pos)
def move_line_up(self):
"""Move up current line or selected text"""
self.__move_line_or_selection(after_current_line=False)
def move_line_down(self):
"""Move down current line or selected text"""
self.__move_line_or_selection(after_current_line=True)
def go_to_new_line(self):
"""Go to the end of the current line and create a new line"""
self.stdkey_end(False, False)
self.insert_text(self.get_line_separator())
def extend_selection_to_complete_lines(self):
"""Extend current selection to complete lines"""
cursor = self.textCursor()
start_pos, end_pos = cursor.selectionStart(), cursor.selectionEnd()
cursor.setPosition(start_pos)
cursor.setPosition(end_pos, QTextCursor.KeepAnchor)
if cursor.atBlockStart():
cursor.movePosition(QTextCursor.PreviousBlock,
QTextCursor.KeepAnchor)
cursor.movePosition(QTextCursor.EndOfBlock, QTextCursor.KeepAnchor)
self.setTextCursor(cursor)
def delete_line(self):
"""Delete current line."""
cursor = self.textCursor()
if self.has_selected_text():
self.extend_selection_to_complete_lines()
start_pos, end_pos = cursor.selectionStart(), cursor.selectionEnd()
cursor.setPosition(start_pos)
else:
start_pos = end_pos = cursor.position()
cursor.beginEditBlock()
cursor.setPosition(start_pos)
cursor.movePosition(QTextCursor.StartOfBlock)
while cursor.position() <= end_pos:
cursor.movePosition(QTextCursor.EndOfBlock, QTextCursor.KeepAnchor)
if cursor.atEnd():
break
cursor.movePosition(QTextCursor.NextBlock, QTextCursor.KeepAnchor)
cursor.removeSelectedText()
cursor.endEditBlock()
self.ensureCursorVisible()
self.document_did_change()
def set_selection(self, start, end):
cursor = self.textCursor()
cursor.setPosition(start)
cursor.setPosition(end, QTextCursor.KeepAnchor)
self.setTextCursor(cursor)
def truncate_selection(self, position_from):
"""Unselect read-only parts in shell, like prompt"""
position_from = self.get_position(position_from)
cursor = self.textCursor()
start, end = cursor.selectionStart(), cursor.selectionEnd()
if start < end:
start = max([position_from, start])
else:
end = max([position_from, end])
self.set_selection(start, end)
def restrict_cursor_position(self, position_from, position_to):
"""In shell, avoid editing text except between prompt and EOF"""
position_from = self.get_position(position_from)
position_to = self.get_position(position_to)
cursor = self.textCursor()
cursor_position = cursor.position()
if cursor_position < position_from or cursor_position > position_to:
self.set_cursor_position(position_to)
#------Code completion / Calltips
def hide_tooltip_if_necessary(self, key):
"""Hide calltip when necessary"""
try:
calltip_char = self.get_character(self.calltip_position)
before = self.is_cursor_before(self.calltip_position,
char_offset=1)
other = key in (Qt.Key_ParenRight, Qt.Key_Period, Qt.Key_Tab)
if calltip_char not in ('?', '(') or before or other:
QToolTip.hideText()
except (IndexError, TypeError):
QToolTip.hideText()
def select_completion_list(self):
"""Completion list is active, Enter was just pressed"""
self.completion_widget.item_selected()
def insert_completion(self, completion, completion_position):
"""Insert a completion into the editor.
completion_position is where the completion was generated.
The replacement range is computed using the (LSP) completion's
textEdit field if it exists. Otherwise, we replace from the
start of the word under the cursor.
"""
if not completion:
return
cursor = self.textCursor()
has_selected_text = self.has_selected_text()
selection_start, selection_end = self.get_selection_start_end()
if isinstance(completion, dict) and 'textEdit' in completion:
cursor.setPosition(completion['textEdit']['range']['start'])
cursor.setPosition(completion['textEdit']['range']['end'],
QTextCursor.KeepAnchor)
text = to_text_string(completion['textEdit']['newText'])
else:
text = completion
if isinstance(completion, dict):
text = completion['insertText']
text = to_text_string(text)
# Get word on the left of the cursor.
result = self.get_current_word_and_position(completion=True)
if result is not None:
current_text, start_position = result
end_position = start_position + len(current_text)
# Check if the completion position is in the expected range
if not start_position <= completion_position <= end_position:
return
cursor.setPosition(start_position)
# Remove the word under the cursor
cursor.setPosition(end_position, QTextCursor.KeepAnchor)
else:
# Check if we are in the correct position
if cursor.position() != completion_position:
return
if has_selected_text:
self.sig_will_remove_selection.emit(selection_start, selection_end)
cursor.removeSelectedText()
self.setTextCursor(cursor)
# Add text
if self.objectName() == 'console':
# Handle completions for the internal console
self.insert_text(text)
else:
if self.code_snippets:
self.sig_insert_completion.emit(text)
else:
self.insert_text(text)
self.document_did_change()
def is_completion_widget_visible(self):
"""Return True is completion list widget is visible"""
return self.completion_widget.isVisible()
def hide_completion_widget(self):
"""Hide completion widget and tooltip."""
self.completion_widget.hide()
QToolTip.hideText()
#------Standard keys
def stdkey_clear(self):
if not self.has_selected_text():
self.moveCursor(QTextCursor.NextCharacter, QTextCursor.KeepAnchor)
self.remove_selected_text()
def stdkey_backspace(self):
if not self.has_selected_text():
self.moveCursor(QTextCursor.PreviousCharacter,
QTextCursor.KeepAnchor)
self.remove_selected_text()
def __get_move_mode(self, shift):
return QTextCursor.KeepAnchor if shift else QTextCursor.MoveAnchor
def stdkey_up(self, shift):
self.moveCursor(QTextCursor.Up, self.__get_move_mode(shift))
def stdkey_down(self, shift):
self.moveCursor(QTextCursor.Down, self.__get_move_mode(shift))
def stdkey_tab(self):
self.insert_text(self.indent_chars)
def stdkey_home(self, shift, ctrl, prompt_pos=None):
"""Smart HOME feature: cursor is first moved at
indentation position, then at the start of the line"""
move_mode = self.__get_move_mode(shift)
if ctrl:
self.moveCursor(QTextCursor.Start, move_mode)
else:
cursor = self.textCursor()
if prompt_pos is None:
start_position = self.get_position('sol')
else:
start_position = self.get_position(prompt_pos)
text = self.get_text(start_position, 'eol')
indent_pos = start_position + len(text) - len(text.lstrip())
if cursor.position() != indent_pos:
cursor.setPosition(indent_pos, move_mode)
else:
cursor.setPosition(start_position, move_mode)
self.setTextCursor(cursor)
def stdkey_end(self, shift, ctrl):
move_mode = self.__get_move_mode(shift)
if ctrl:
self.moveCursor(QTextCursor.End, move_mode)
else:
self.moveCursor(QTextCursor.EndOfBlock, move_mode)
def stdkey_pageup(self):
pass
def stdkey_pagedown(self):
pass
def stdkey_escape(self):
pass
#----Qt Events
def mousePressEvent(self, event):
"""Reimplement Qt method"""
if sys.platform.startswith('linux') and event.button() == Qt.MidButton:
self.calltip_widget.hide()
self.setFocus()
event = QMouseEvent(QEvent.MouseButtonPress, event.pos(),
Qt.LeftButton, Qt.LeftButton, Qt.NoModifier)
QPlainTextEdit.mousePressEvent(self, event)
QPlainTextEdit.mouseReleaseEvent(self, event)
# Send selection text to clipboard to be able to use
# the paste method and avoid the strange spyder-ide/spyder#1445.
# NOTE: This issue seems a focusing problem but it
# seems really hard to track
mode_clip = QClipboard.Clipboard
mode_sel = QClipboard.Selection
text_clip = QApplication.clipboard().text(mode=mode_clip)
text_sel = QApplication.clipboard().text(mode=mode_sel)
QApplication.clipboard().setText(text_sel, mode=mode_clip)
self.paste()
QApplication.clipboard().setText(text_clip, mode=mode_clip)
else:
self.calltip_widget.hide()
QPlainTextEdit.mousePressEvent(self, event)
def focusInEvent(self, event):
"""Reimplemented to handle focus"""
self.focus_changed.emit()
self.focus_in.emit()
self.highlight_current_cell()
QPlainTextEdit.focusInEvent(self, event)
def focusOutEvent(self, event):
"""Reimplemented to handle focus"""
self.focus_changed.emit()
QPlainTextEdit.focusOutEvent(self, event)
def wheelEvent(self, event):
"""Reimplemented to emit zoom in/out signals when Ctrl is pressed"""
# This feature is disabled on MacOS, see spyder-ide/spyder#1510.
if sys.platform != 'darwin':
if event.modifiers() & Qt.ControlModifier:
if hasattr(event, 'angleDelta'):
if event.angleDelta().y() < 0:
self.zoom_out.emit()
elif event.angleDelta().y() > 0:
self.zoom_in.emit()
elif hasattr(event, 'delta'):
if event.delta() < 0:
self.zoom_out.emit()
elif event.delta() > 0:
self.zoom_in.emit()
return
QPlainTextEdit.wheelEvent(self, event)
self.hide_completion_widget()
self.highlight_current_cell()
def position_widget_at_cursor(self, widget):
# Retrieve current screen height
desktop = QApplication.desktop()
srect = desktop.availableGeometry(desktop.screenNumber(widget))
left, top, right, bottom = (srect.left(), srect.top(), srect.right(),
srect.bottom())
ancestor = widget.parent()
if ancestor:
left = max(left, ancestor.x())
top = max(top, ancestor.y())
right = min(right, ancestor.x() + ancestor.width())
bottom = min(bottom, ancestor.y() + ancestor.height())
point = self.cursorRect().bottomRight()
point = self.calculate_real_position(point)
point = self.mapToGlobal(point)
# Move to left of cursor if not enough space on right
widget_right = point.x() + widget.width()
if widget_right > right:
point.setX(point.x() - widget.width())
# Push to right if not enough space on left
if point.x() < left:
point.setX(left)
# Moving widget above if there is not enough space below
widget_bottom = point.y() + widget.height()
x_position = point.x()
if widget_bottom > bottom:
point = self.cursorRect().topRight()
point = self.mapToGlobal(point)
point.setX(x_position)
point.setY(point.y() - widget.height())
if ancestor is not None:
# Useful only if we set parent to 'ancestor' in __init__
point = ancestor.mapFromGlobal(point)
widget.move(point)
def calculate_real_position(self, point):
return point